Search

Conversion coatings are one of the primary types of galvanic coatings used to protect steel structures against corrosion. They are created through chemical reactions between the metal surface and the environment of the phosphating. This paper investigates the impact that the addition of new metal cations to the phosphating reaction environment has on the quality of the final coating. So far, standard phosphate coatings have contained only one primary element, such as zinc in the case of zinc coatings, or two elements, such as manganese and iron in the case of manganese coatings. The structural properties have been determined using a scanning electron microscope (SEM), X-ray diffraction (XRD), and electrochemical tests. New manganese coatings were produced through a reaction between the modified phosphating bath and the metal (Ba, Zn, Cd, Mo, Cu, Ce, Sr, and Ca). This change was noticeable in the structure of the produced manganese phosphate crystallites. A destructive effect of molybdenum and chromium was demonstrated. Microscopic analysis, XRD analysis and electrochemical tests suggest that the addition of new metal cations to the phosphating bath affects the corrosion resistance of the modified coating.

Manganese phosphate coating could be used to protect the surface of steel products. However, it is essential to determine the effects which process parameters, as well as the types of additives used, have on the efficiency of coating deposition. Thus, we present here a process of phosphatization of low-alloy steel (for 15 min at 95 &deg, C) in manganese/nickel baths followed by a passivation process with the use of a silicon and zircon compounds. The microstructure and morphology of the surface were analyzed by SEM EDX and XRD methods. The obtained results showed that the manganese phosphate could be effectively formed at 95 &deg, C in the solution containing nickel and guanidine derivatives. Anodic polarization of manganese coating was investigated in 0.5 M KCl by the analysis of polarization resistance. The effects of the activation process on corrosion properties of the coating have been examined. It was observed that an increased concentration of activating substances in the activation bath results in the enhancement of corrosion resistance.