Search

Abstract. The subject of this article is the assessment of measurement uncertainty with the kinematic telescopic bar QC20-W in the accuracy test of MOTOMAN HP20 industrial robot. The measurements were performed to determine the statistical uncertainty of error measurement using the system applied. Analysed in tests was the robot’s ability to recreate a circular outline through standard, complex and extended measurement of uncertainty measurement. The obtained results were served to perform rapid evaluation of robot inaccuracy. These uncertainties were based on the information included in the device calibration certificate (estimated with method B) but also on the basis of measurements and statistical data (estimated with method A). These components of the uncertainty budget take relatively small values (uc=0.818÷4.130; U=1.636÷8.260 for k=2, which proves that a properly selected method was applied to the research task. The method of research and calculation precisely identified key uncertainties allowing for an objective assessment of the industrial robot errors carried out with Renishaw the kinematic telescopic bar.

The subject of this article is the assessment of measurement uncertainty of the Renishaw XL80 laser interferometer in MOTOMAN HP20 industrial robot inaccuracy test. The paper presents the methodology for estimating the measurement uncertainty of the system used in tests. Estimates of standard and extended uncertainty were calculated for the given research method. These uncertainties are based on the information included in the device calibration certificate (method B) but also on the basis of measurements and statistics (method A). The authors proposed their own research methodology, taking into account measurement capabilities of the applied system and the specific character of the robot work. Calculations employed universal computing systems based on standard algorithms. The results obtained from the research and calculations precisely defined key uncertainties allowing for objective evaluation of industrial robot errors identified by the Renishaw XL80 system.

This paper discusses methods of assessing a process capability in the aspect of preserving technological quality of the product. Results of studies, conducted with use of standard measurement system, are presented on the basics of which evaluation of the numerical capability of the typical machining process was done. Process capability indicator Cpu was chosen to be the rate of technological quality. During determining the numerical value of this indicator systematic and random variability of the mean value of dimension deviations. Special attention was paid to effectivness and usfullness of the chosen indicator for evaluating the technological quality of product. Results of studies are shown in graphical and tabelarical form. [ABSTRACT FROM AUTHOR]