Search

El presente artículo rastrea el paralelismo existente en el pensamiento de Alasdair MacIntyre, entre la etapa marxista juvenil y la neoaristotélica madura, en cuanto al tipo de actividad de resistencia que se debe oponer al sistema y el modelo de autoridad que es necesario para sostener dicha actividad. Mediante una lectura comparativa de los textos más relevantes de cada período, se llega a la conclusión de que no sólo la propuesta práctica constituye una forma de auto-liberación por parte de los sujetos perjudicados por el sistema y que el modelo de autoridad es uno voluntariamente aceptado y no coercitivo, sino también que en ambos momentos del análisis existe una tensión entre estos dos elementos, que el autor intenta resolver apelando a los mismos recursos

Some of the primary barriers to widespread adoption of metal additive manufacturing (AM) are persistent defect formation in built components, high material costs, and lack of consistency in powder feedstock. To generate more reliable, complex-shaped metal parts, it is crucial to understand how feedstock properties change with reuse and how that affects build mechanical performance. Powder particles interacting with the energy source, yet not consolidated into an AM part can undergo a range of dynamic thermal interactions, resulting in variable particle behavior if reused. In this work, we present a systematic study of 316L powder properties from the virgin state through thirty powder reuses in the laser powder bed fusion process. Thirteen powder characteristics and the resulting AM build mechanical properties were investigated for both powder states. Results show greater variability in part ductility for the virgin state. The feedstock exhibited minor changes to size distribution, bulk composition, and hardness with reuse, but significant changes to particle morphology, microstructure, magnetic properties, surface composition, and oxide thickness. Additionally, sieved powder, along with resulting fume/condensate and recoil ejecta (spatter) properties were characterized. Formation mechanisms are proposed. It was discovered that spatter leads to formation of single crystal ferrite through large degrees of supercooling and massive solidification. Ferrite content and consequently magnetic susceptibility of the powder also increases with reuse, suggesting potential for magnetic separation as a refining technique for altered feedstock.

Background and objectives Perceived distress and discomfort has received less attention in the literature than other factors that influence the course of bipolar disorder (BD). Given its proven relationship with psychopathology, it is of great importance. However, it is necessary to design an instrument to assess it since there is no scale that measures this feature. Methods Descriptive cross-sectional design in which 72 BD euthymic patients were assessed. A scale to measure perceived distress in BD (perceived consequences, impact on interpersonal relationships and disorder self-management), scored from 1 to 10 and developed for this study, was applied. In addition, the Young Mania Rating Scale (YMRS) and the Hamilton Depression Scale (HAM-D) were also applied. Results Reliability and validity analyses, as well as descriptive and inferential analysis were done. The developed measure showed adequate reliability and validity properties. Descriptive analyses show that the issues that generate more distress in patients were the burden associated to the disease, the perception of a lack of responsiveness from close people, the negative impact of their illness on those relationships, the alteration of mental functions, and the difficulties of managing daily stress. Conclusions The present study offers evidence of the psychometric adequacy and usefulness of the developed scale to assess the distress experienced by patients with BD. It is necessary for mental health professionals to pay attention to the patient's perception of illness.

The $^{24}\mathrm{Mg}+^{12}\mathrm{C}$ fusion reaction was used to perform a detailed $\ensuremath{\gamma}$-ray spectroscopy study of the astrophysically important nucleus $^{34}\mathrm{Ar}$. In particular, an experimental setup, coupling the advanced $\ensuremath{\gamma}$-ray tracking array GRETINA with the well-established Argonne fragment mass analyzer (FMA), was employed to obtain excitation energies and spin-parity assignments for excited states in $^{34}\mathrm{Ar}$, both above and below the proton separation energy. For the first time, an angular distribution analysis of in-beam $\ensuremath{\gamma}$ rays from fusion-evaporation reactions, using a tracking array, has been performed and Coulomb energy differences of analog states in the $T=1,$ $A=34$ mirror system, explored from 0 to 6 MeV. Furthermore, we present a comprehensive discussion of the astrophysical $^{33}\mathrm{Cl}(p,\ensuremath{\gamma})$ stellar reaction rate, together with implications for the identification of nova presolar grains from sulfur isotopic abundances.

Introduction: The role of Olanzapine therapeutic drug monitoring is controversial. The present study explores the associations of Olanzapine plasma concentrations with clinical response and metabolic side effects in first episode psychosis (FEP) after 2 months of treatment. Methods: Forty-seven patients were included. Improvement in clinical symptomatology was assessed using the PANSS. Metabolic assessment included weight, blood pressure, waist circumference, blood glucose, total cholesterol, high-density lipoprotein, low-density lipoprotein, and triglycerides. Results: The Olanzapine plasma concentrations after 2 months of treatment were positively correlated with weight gain (r = 0.49, p = 0.003), and a concentration > 23.28 ng/mL was identified as a positive predictor of weight gain (≥ 7%). The Olanzapine concentration to dose (C/D) ratio was positively correlated with the percentage of improvement in the total PANSS (r = 0.46, p = 0.004), and a C/D ratio > 2.12 was identified as a positive predictor of a good response (percentage of improvement > 30%) after 2 months of treatment. We also identified several factors that could alter Olanzapine pharmacokinetics: gender (p = 0.03), diagnosis (p = 0.05), smoking habit (p = 0.05), and co-medications such as valproic acid (p = 0.05) and anxiolytics (p = 0.01). Discussion: In conclusion, our results suggest that therapeutic drug monitoring of Olanzapine could be helpful to evaluate therapeutic efficacy and metabolic dysfunction in FEP patients treated with Olanzapine.

[EN] The continuous raise in the integration scale of CMOS technology has provoked an augment in the fault rate. Particularly, computer memory is affected by Single Cell Upsets (SCU) and Multiple Cell Upsets (MCU). A common method to tolerate errors in this element is the use of Error Correction Codes (ECC). The addition of an ECC introduces a series of overheads: silicon area, power consumption and delay overheads of encoding and decoding circuits, as well as several extra bits added to allow detecting and/or correcting errors. ECC can be designed with different parameters in mind: low redundancy, low delay, error coverage, etc. The idea of this paper is to study the effects produced when adding an ECC to a microprocessor with respect to overheads. Usually, ECC with different characteristics are continuously proposed. However, a great quantity of these proposals only present the ECC, not showing its behavior when using them in a microprocessor. In this work, we present the design of an ECC whose main characteristic is a low number of code bits (low redundancy). Then, we study the overhead this ECC introduces. Firstly, we show a study of silicon area, delay and power consumption of encoder and decoder circuits, and secondly, how the addition of this ECC affects to a RISC microprocessor., © 2021 IEEE. Personal use of this material is permitted. Permissíon from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertisíng or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

Additively manufactured austenitic stainless steels exhibit numerous microstructural and morphological differences compared to their wrought counterparts that will influence the metals corrosion resistance. The characteristic as-printed surface roughness of powder bed fusion (PBF) stainless steel parts is one of these morphological differences that increases the parts susceptibility to localized corrosion. This study experimentally determines the average surface roughness and breakdown potential (Eb) for PBF 316L in 6 surface finished states: as-printed, ground with SiC paper, tumble polished in abrasive media, electro-polished, chemically passivated, and the application of a contour/re-melt scan strategy. In general, a smaller average surface roughness led to a larger Eb. The smoothest surface treatments, ground and electro-polished conditions, led to Eb near the materials limit (~+1.0 VAg/AgCl) while all other surface treatments exhibited significantly lower Eb (~+0.3 VAg/AgCl) The build angle was also shown to impact surface roughness, where surfaces at high angles from the build direction resulted in larger roughness values, hence lower Eb.

This work was supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, under Contract No. DEAC02-06CH11357 and Grants No. DEFG02-94-ER40834, DEFG02-97-ER41041, DEFG02-97-ER41043, DEFG02-94-ER40848, and DESC0014231. UK personnel were supported by the Science and Technologies Facilities Council (STFC) and C. A. was supported by the Natural Sciences and Engineering Research Council of Canada. J. J. acknowledges support by the Spanish MINECO Grant No. AYA2017-86274-P, by the E. U. FEDER funds, and by the AGAUR/Generalitat de Catalunya Grant No. SGR661/2017. This research uses resources of ANL’s ATLAS facility, which is a DOE Office of Science User facility.

The discovery of presolar grains in primitive meteorites has initiated a new era of research in the study of stellar nucleosynthesis. However, the accurate classification of presolar grains as being of specific stellar origins is particularly challenging. Recently, it has been suggested that sulfur isotopic abundances may hold the key to definitively identifying presolar grains with being of nova origins and, in this regard, the astrophysical 33Cl(p,γ)34Ar reaction is expected to play a decisive role. As such, we have performed a detailed γ-ray spectroscopy study of 34Ar. Excitation energies have been measured with high precision and spin-parity assignments for resonant states, located above the proton threshold in 34Ar, have been made for the first time. Uncertainties in the 33Cl(p,γ) reaction have been dramatically reduced and the results indicate that a newly identified ℓ=0 resonance at Er=396.9(13) keV dominates the entire rate for T=0.25–0.40GK. Furthermore, nova hydrodynamic simulations based on the present work indicate an ejected 32S/33S abundance ratio distinctive from type-II supernovae and potentially compatible with recent measurements of a presolar grain., This work was supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics, under Contract No. DEAC02-06CH11357 and Grants No. DEFG02-94-ER40834, DEFG02-97-ER41041, DEFG02-97-ER41043, DEFG02-94-ER40848, and DESC0014231. UK personnel were supported by the Science and Technologies Facilities Council (STFC) and C. A. was supported by the Natural Sciences and Engineering Research Council of Canada. J. J. acknowledges support by the Spanish MINECO Grant No. AYA2017-86274-P, by the E. U. FEDER funds, and by the AGAUR/Generalitat de Catalunya Grant No. SGR661/2017. This research uses resources of ANL’s ATLAS facility, which is a DOE Office of Science User facility.

El presente artículo describe el desarrollo de un Proyecto formativo para la implementación de actividades y recursos de aprendizaje en la plataforma UCO-Moodle por parte de profesorado novel, bajo tutela y coordinación de profesorado con experiencia previa contrastada. Se trata de un trabajo multidisciplinar donde las acciones se han ejecutado para ocho asignaturas de cuatro Áreas de conocimiento. El impacto de las innovaciones introducidas en varias asignaturas, afectó a más de 500 alumnos pertenecientes a seis títulos de grado de la Universidad de Córdoba. El trabajo realizado se completó con una evaluación de satisfacción por parte de los alumnos de los nuevos recursos de aprendizaje así como la autoevaluación del profesorado novel sobre la experiencia desarrollada. This article describes a project for the implementation of learning activities and resources in the UCO-Moodle platform by training teachers has been developed under the supervision and coordination of senior teaching staff with proven previous experience. It is a multidisciplinary work where the actions have been executed for eight different subjects in four Areas of knowledge. The impact of the learning activities introduced in different subjects was extended to more than 500 students belonging to six undergraduate degrees from the University of Cordoba. The experience has included an evaluation of students' satisfaction with the new learning resources as well as the self-assessment of the new teaching staff on the executed actions.

Los canales de desvío y vertedores laterales en un río de planicie, derivan los flujos líquidos excedentes, reduciendo los niveles y evitando el desbordamiento de los cauces, lo que mitiga las inundaciones. El estudio tuvo el objetivo de determinar la tasa de sedimentos en suspensión por efectos de un vertedor lateral en un río de planicie. El funcionamiento de estas estructuras cambia el comportamiento del flujo líquido y de los sedimentos que transporta en suspensión, provocando cambios en la morfología e hidrodinámica del cauce. Se utilizó un perlador de flujo Doppler (ADCP) River Ray y un muestreador integral de sedimentos en suspensión US-DH59, para medir los flujos líquidos y sólidos en el río de la Sierra en el Estado de Tabasco, México y en el vertedor lateral El Censo. Los datos obtenidos en campo se utilizaron para evaluar los efectos del vertedor lateral sobre la hidrodinámica y morfología del cauce. Los resultados muestran que hay un incremento de 109.4% en la tasa de sedimentos en el flujo aguas abajo del vertedor y desequilibrio geomorfológico, lo que denotan una alteración al comportamiento natural del flujo bifásico compuesto por una fase de flujo líquido y otra de flujo de sedimentos.

The Planetary Science Archive (PSA) is the European Space Agency's (ESA) repository of science data from all planetary science and exploration missions. The PSA provides access to scientific data sets through various interfaces at http://psa.esa.int . All data sets are scientifically peer-reviewed by independent scientists, and are compliant with the Planetary Data System (PDS) standards. Mostly driven by the evolution of the PDS standards which all new ESA planetary missions shall follow and the need to update the interfaces to the archive, the PSA has undergone an important re-engineering. In order to maximise the scientific exploitation of ESA's planetary data holdings, significant improvements have been made by utilising the latest technologies and implementing widely recognised open standards. To facilitate users in handling and visualising the many products stored in the archive which have spatial data associated, the new PSA supports Geographical Information Systems (GIS) by implementing the standards approved by the Open Geospatial Consortium (OGC). The modernised PSA also attempts to increase interoperability with the international community by implementing recognised planetary science specific protocols such as the PDAP (Planetary Data Access Protocol) and EPN-TAP (EuroPlanet-Table Access Protocol). In this paper we describe some of the methods by which the archive may be accessed and present the challenges that are being faced in consolidating data sets of the older PDS3 version of the standards with the new PDS4 deliveries into a single data model mapping to ensure transparent access to the data for users and services whilst maintaining a high performance.