Search

Polyelectrolyte-colloid (PEC) complexes, ubiquitous across diverse fields, exhibit remarkable phase transitions, mimicking intricate biological assemblies. While the role of electrostatic forces in the PEC complex assembly is undeniable, achieving a holistic comprehension remains an elusive goal. This study unveils a fascinating phenomenon: the formation of highly collapsed coacervate structures in PEC complexes at elevated polyelectrolyte concentrations, followed by the swelling of complexes at even higher concentrations. Employing anionic silica colloids and cationic chitosan as a model system, small-angle X-ray/neutron (SAXS/SANS) elucidates the transition from a bead-on-a-necklace-like phase to a dense packed coacervate state (with volume fraction ∼0.62) until 3 wt % concentration of the polyelectrolyte. However, beyond 3 wt %, swelling of the dense collapsed assembly is observed. This structural evolution of PEC complexes as a function of chitosan concentration is attributed to the interplay of electrostatically driven interactions and the Donnan effect. Notably, the critical concentration for coacervation, C s *, demonstrates a linear dependence on the initial colloid concentration. Interestingly, a complete expansion of the coacervate is observed at a high polyelectrolyte concentration, particularly for dilute colloid solutions (2 wt %). Furthermore, the addition of an electrolyte sheds light on the delicate interplay of forces. While a low electrolyte concentration partially screens charges, leading to a shift in phase diagram, higher concentrations trigger complete coacervate dissolution beyond the critical electrolyte concentration of 0.2 M, due to the complete screening of electrostatic charges.

Considering the low-level dose detection requirement for neutron and γ radiation in cancer therapy, synthesis and exploratory studies have been performed on a newly developed phosphor LiAlO 2 :Gd. Our results reveal that the presence of both Li and Gd makes it sensitive to both gamma and thermal neutrons. The applicability of LiAlO 2 :Gd for beta, gamma, and neutrons in both thermally stimulated and optically stimulated modes has been verified by extensive experiments followed by kinetic parametric evaluation with theoretical calculations. The current work confirms that LiAlO 2 :Gd is a highly sensitive phosphor with a minimum detectable dose of 5.7 μSv for gamma and 92 μSv for themral neutrons. The phosphor is found to show very high sensitivity at low energy and dose. Its ability for detection and discrimination of both gamma and thermal neutrons makes it a potential material to be used in medical dosimetry.

Understanding the role of interparticle interactions in jamming phenomena is essential for gaining insights into the intriguing glass transition behavior observed in atomic and molecular systems. In this study, we investigate the jamming behavior of colloids with tunable interparticle interactions during evaporation-induced assembly (EIA). By manipulating the interaction among charged colloids using cationic polyethyleneimine (PEI) through electro-sorption and subsequent free polymer induced repulsion, we observe distinct jamming behavior in silica colloids during EIA, depending on the interparticle interactions. Silica colloids with strong repulsive interactions exhibit a repulsive colloidal glass state with a volume fraction of silica colloids in supraparticle ϕ ∼ 0.70. On the other hand, PEI-mediated attractive interactions among silica colloids lead to an attractive colloidal glass phase with a significantly lower ϕ ∼ 0.43. Free polymer induced repulsion of colloids at higher PEI concentration once again results in a repulsive glassy state with ϕ ∼ 0.61. Furthermore, we revealed that interparticle interactions not only influence the jamming behavior but also play a significant role in shaping the morphology of self-assembled structures during EIA, and the assembled structure undergoes a morphological reentrant transition from a doughnut-like shape to a spherical form and again back to a doughnut-like configuration. Jamming-dependent evolution of micropores and dynamics of the confined PEI have been probed using positron annihilation lifetime spectroscopy (PALS) and broadband dielectric spectroscopy (BDS). PALS reveals distinct variations in the micropores of the supraparticles with different PEI loadings, confirming the impact of jamming on the evolution of the micropores within the supraparticles. BDS measurements uncover non-monotonic dynamics of PEI molecules confined in the evolved pore network. It is revealed that the reentrant jamming behavior of colloids, modulated by PEI, holds profound significance for the long-term stability of supraparticles.

A analogous series of 2-(3,5-dimethylpyrazol-1-yl)phenyl substituted selenoether complexes of palladium [PdCl 2 (RSeC 6 H 4 dmpz)]; (R = CH 2 COOH (1), CH 2 CH 2 COOH (2), and CH 2 CH 2 OH (3); dmpz = dimethylpyrazole) were ably synthesized in a facile manner and exhaustively characterized. Insight into molecular structures of these complexes was keenly probed through single crystal X-ray diffraction (XRD) analysis, unfolding the structural scaffolds and laying into molecular aggregation, availed through hydrogen bonding interactions borne out of tethered protic groups. The complexes were converted to capping free palladium selenide (Pd 17 Se 15 ) nanoparticles through pyrolysis and evaluated for their electrocatalytic efficacy towards the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER) and methanol oxidation reaction (MOR) in alkaline medium. In an alkaline medium, PSNP1 (Pd 17 Se 15 ) obtained from the hydrogen bonded aggregate of complex PdCl 2 L 1 (1) produced good HER activity. PSNP1 had a little decrease in current density after 300 continuous cycles, which proves that the catalyst presents high stability in the recycling process. For the electrocatalytic oxidation of CH 3 OH, the electrocatalytic rate constant ( k ) obtained was 0.3 × 10 3 cm 3 mol -1 s -1 .

Evaporation is a ubiquitous phenomenon. Rapid evaporation of the continuous phase from micrometric colloidal droplets can be used to realize nanostructured microgranules, constituting the assembled nanoparticles. One of the important aspects of such nonequilibrium assembly is the nature of the packing of nanoparticles in the microgranules. The present work demonstrates the evidence of size stratification of the nanoparticles in such far-from-equilibrium configurations. Small-angle X-ray scattering, in combination with particle packing simulation, reveals the "large on top"-type stratification in such assembled microgranules, where the larger particles get concentrated at the outer shell of the granules while the smaller particles reside in the core region. It also reveals the presence of local clusters in such a rapid evaporative assembly in aerosolized colloidal droplets.

The evolution of defects during perovskite film fabrication deteriorates the overall film quality and adversely affects the device efficiency of perovskite solar cells (PSCs). We endeavored to control the formation of defects by applying an additive engineering strategy using FABr, which retards the crystal growth formation of CsPbI 2.2 Br 0.8 perovskite by developing an intermediate phase at the initial stage. Improved crystalline and pinhole-free perovskite film with an optimal concentration of FABr-0.8M% additive was realized through crystallographic and microscopic analysis. Suppressed non-radiative recombination was observed through photoluminescence with an improved lifetime of 125 ns for FABr-0.8M% compared to the control film (83 ns). The champion device efficiency of 17.95% was attained for the FABr-0.8M% PSC, while 15.94% efficiency was achieved in the control PSC under air atmospheric conditions. Furthermore, an impressively high indoor performance of 31.22% was achieved for the FABr-0.8M% PSC under 3200 K (1000 lux) LED as compared to the control (23.15%). With a realistic approach of air processing and controlling the crystallization kinetics in wide-bandgap halide PSCs, this investigation paves the way for implementing additive engineering strategies to reduce defects in halide perovskites, which can further benefit efficiency enhancements in outdoor and indoor applications.

Herein, we report a simple, cost-effective, and eco-friendly approach for producing polyethyleneimine (PEI)-assisted silver nanoparticle-supported silica microspheres through evaporation-induced assembly (EIA). The silica-PEI microspheres obtained through EIA consisted of highly trapped PEI molecules owing to their electrosorption onto oppositely charged silica colloids. The trapped PEI molecules in the microspheres played a crucial role in linking silver ions to form silver ion-PEI complexes, which were then reduced to form silver nanoparticles. Further, the complex interactions between PEI and silica colloids led to enhanced porosity in the microspheres, enabling the efficient adsorption of Ag ions. The characterization of the Ag-SiO 2 microspheres was carried out using various techniques, including field-emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), and Fourier transform infrared (FTIR) spectroscopy, which confirmed the successful formation of Ag nanoparticles on microspheres, and a plausible formation mechanism is elucidated. The Ag-SiO 2 microspheres exhibited good sensing properties for hydrogen peroxide (H 2 O 2 ), with an estimated limit of detection of 1.08 mM and a sensitivity of 0.033 μA mM -1 mm -2 . The microspheres were also used as a surface-enhanced Raman scattering (SERS) substrate, which demonstrated high sensitivity in detecting rhodamine 6G down to a concentration of 2 × 10 -6 M. The present approach elucidates a promising alternative to conventional methods that face challenges, such as scalability issues, complex and cumbersome synthesis procedures, and the use of strong reducing agents. With the potential for industrial-level scalability, this method offers a viable strategy for producing Ag-SiO 2 microspheres with possible applications in biomedical and sensing technologies., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

For various industrial processes, the stabilization of an oil phase is crucial and demands a proper balance of complex interactions in an emulsion system. In Pickering emulsions, this is achieved by introducing nanoparticles, which become organized at the oil-water interface. The influence of interparticle interactions towards the formation of a stable emulsion and the ordering of the stabilizing nanoparticles is intriguing and needs attention. In this work, the role of amphiphilic interactions between hydrophilic silica nanoparticles and the Pluronic F127 tri-block co-polymer towards the spontaneous formation of a fairly stable Pickering emulsion has been studied using small-angle X-ray scattering. Unlike the usual random arrangements of the nanoparticles in a conventional Pickering emulsion, we observed highly organized silica nanoparticles at the oil-water interface. The established standard raspberry structural model of the Pickering emulsion fails to explain such strong ordering as observed in the present case. A plausible formation mechanism of the present Pickering emulsion with a high on-surface silica correlation is elucidated on the basis of the combined interactions of the block co-polymer and silica particles. A computer model is developed to elucidate the effects of size and distribution of the surface-decorating nanoparticles and their positional correlation.

A Small- and Wide-Angle X-ray Scattering (SWAXS) beamline (BL-18) is installed and commissioned at a 1.5 T bending magnet port (5°) of Indus-2 synchrotron at RRCAT, Indore, India. The ∼40-m-long beamline has tunable x-ray energy in the range of 5-20 keV by using a double crystal monochromator. A 1.5-m-long toroidal mirror is used to focus the x-ray beam at the detector position. The beamline is equipped with a 6-m-long movable detector stage to access different wave-vector transfer ranges. At present, an online image plate area detector and a linear position-sensitive gas detector are installed for Small-Angle X-ray Scattering (SAXS) and Wide-Angle X-ray Scattering (WAXS) measurements, respectively. The beamline is operational in simultaneous SAXS/WAXS mode to probe the mesoscopic as well as molecular level structure over a wide range of wave-vector transfer. The specification of the beamline and its performance are reported here. A few recent experimental results, as obtained from BL-18, are also described in brief., (© 2023 Author(s). Published under an exclusive license by AIP Publishing.)

Understanding adsorption processes at the molecular level has transformed the discovery of engineered materials for maximizing gas storage capacity and kinetics in adsorption-based carbon capture applications. In this work, we studied the molecular mechanism of gas (CO 2 , H 2 , methane, and ethane) adsorption inside an interconnected porous network of carbon. This was achieved by synthesizing novel macro-meso-microporous carbon (M 3 C) nanospheres with interconnected pore structures. The M 3 Cs showed a CO 2 capture capacity of 5.3 mmol/g at atmospheric CO 2 pressure, with excellent kinetics. This was due to fast CO 2 adsorption within the interconnected hierarchical macro-meso-microporous M 3 C. In situ small-angle neutron scattering (SANS) under various CO 2 pressures indicated that the macro- and mesopores of M 3 C enable fast diffusion of CO 2 molecules inside the micropores, where adsorbed CO 2 molecules densify into a liquid-like state. This strong densification of CO 2 molecules causes fast CO 2 diffusion in the macro- and mesopores of M 3 C, restarting the adsorption cycle for fresh CO 2 molecules until all pores are completely filled. Notably, M 3 C also showed good capture capacities for hydrogen and various hydrocarbons, with excellent selectivity toward ethane over methane.

A simple solvothermal method was used to synthesize a metal-organic framework (MOF) with an Al metal entity, viz., CAU-1 NH 2 . The synthesized MOF was characterized using different techniques like X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy (SEM), field emission SEM (FE-SEM), transmission electron microscopy, small-angle X-ray scattering, positron annihilation lifetime spectroscopy, and X-ray photoelectron spectroscopy. The radiation stability was evaluated by irradiating the material up to a cumulative dose of 2 MGy using 60 Co for the first time. The studies showed a remarkable gamma irradiation stability of the material up to 1 MGy. The porosity and surface area of the synthesized MOF were determined by Brunauer-Emmett-Teller, which showed a high specific surface area of 550 m 2 /g. The pH dependence study of Th uptake from an aqueous solution was performed from pH 2-8, followed by adsorption isotherm and adsorption kinetics studies. These results revealed that the Langmuir and pseudo-second-order kinetic models can be well adapted for understanding the Th uptake and kinetics, respectively. The synthesized MOF exhibited an ∼404 mg/g thorium adsorption capacity. Selectivity studies of adsorption of Th w.r.t. to U and different metal ions such as Cu, Co, Ni, and Fe showed that Th gets adsorbed preferentially as compared to other metal ions. In addition, the MOF could be used multiple times without much deterioration., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

All-inorganic CsPbI 2 Br (CPIB) perovskite has gained strong attention due to their favorable optoelectronic properties for photovoltaics. However, solution-processed CPIB films suffer from poor morphology due to the rapid crystallization process, which must be resolved for desirable photovoltaic performance. We introduced phenethylammonium iodide (PEAI) as an additive into a perovskite precursor that effectively controls the crystallization kinetics to construct the preferred quality α-CPIB film under ambient conditions. Various photophysical and structural characterization studies were performed to investigate the microstructural, morphological, and optoelectronic properties of the CPIB and PEAI-assisted perovskite films. We found that PEAI plays a vital role in decreasing pinholes, ensuring precise crystal growth, enhancing the crystallinity, improving the uniformity, and tailoring the film morphology by retarding the crystallization process, resulting in an improved device performance. The device based on the optimized PEAI additive (0.8 mg) achieved a respectably high power conversion efficiency (PCE) of 17.40% compared to the CPIB perovskite solar cell (PSC; 15.75%). Moreover, the CPIB + 0.8 mg PEAI PSC retained ∼87.25% of its original PCE, whereas the CPIB device retained ∼66.90% of the initial PCE after aging in a dry box at constant heating (85 °C) over 720 h, which revealed high thermal stability. Furthermore, the indoor photovoltaic performance under light-emitting diode (LED) lighting conditions (3200 K, 1000 lux) was investigated, and the CPIB + 0.8 mg PEAI PSC showed a promising PCE of 26.73% compared to the CPIB device (19.68%). In addition, we developed a switching function by employing the optimized PSC under LED lighting conditions, demonstrating the practical application of constructed indoor PSCs.

Lightweight and flexible gas sensors are essentially required for the fast detection of toxic gases to pass on the early warning to deter accident situations caused by gas leakage. In view of this, we have fabricated a thin paper-like free-standing, flexible, and sensitive carbon nanotube (CNT) aerogel gas sensor. The CNT aerogel film synthesized by the floating catalyst chemical vapor deposition method consists of a tiny network of long CNTs and ∼20% amorphous carbon. The pores and defect density of the CNT aerogel film were tuned by heating at 700 °C to obtain a sensor film, which showed excellent sensitivity for toxic NO 2 and methanol gas in the concentration range of 1-100 ppm with a remarkable limit of detection ∼90 ppb. This sensor has consistently responded to toxic gas even after bending and crumpling the film. Moreover, the film heat-treated at 900 °C showed a lower response with opposite sensing characteristics due to switching of the semiconductor nature of the CNT aerogel film to n-type from p-type. The annealing temperature-based adsorption switching can be related to a type of carbon defect in the CNT aerogel film. Therefore, the developed free-standing, highly sensitive, and flexible CNT aerogel sensor paves the way for a reliable, robust, and switchable toxic gas sensor., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Fine tuning of the pore architecture and flexibility of zeolitic imidazolate frameworks (ZIFs) is highly crucial for realizing their applications in molecular gas separation. Mixed ligand frameworks (ZIF-7-8) synthesized by mixing 2-methylimidazole (2meIm) and benzimidazole (bIm) ligands show enhanced gas separation performance, attributable to pore and flexibility tuning. In the present study, positron annihilation lifetime spectroscopy (PALS) measurements under CO 2 pressure have been used to experimentally investigate the tuning of the pore architecture and flexibility of mixed ligand frameworks ZIF-7-8 having a ZIF-8 structure and similar morphology with varying bIm content up to 18.2%. The aperture and cavity of frameworks begin to open up with an increasing bIm ligand content followed by a decrease at a higher content. On the contrary, flexibility of the frameworks indexed from PALS measurements carried out under CO 2 pressure shows a decreasing trend followed by an increase. The present study shows that mixed ligand frameworks having a larger aperture size are less flexible as a result of inherent open configurations of ligands in the framework lattice. On the other hand, frameworks having a comparatively smaller aperture size show higher flexibility as a result of a possibility of twisting of the ligands under CO 2 pressure, resulting in aperture opening. The pore-opening phenomenon as a result of lattice flexibility under CO 2 pressure is observed to be fully reversible for ZIF-7-8.

Titania (TiO 2 ) based photocatalysts have shown tremendous potential in tackling important issues related to energy, the environment, and water purification. The tunable morphologies of the TiO 2 based multicomponent composites are promising for the improvement of photocatalytic characteristics for practical applications. In this work, we report a one-step facile approach to achieve hollow silica/titania microspheres through the process of reactive assembly at the immiscible interface of micrometer-sized droplets. Scanning electron microscopy and small-angle neutron scattering revealed the hierarchal structure of the microspheres. Elemental mapping of the composite microspheres provided direct evidence of the incorporation of silica nanoparticles into the microspheres. The diffusion of reactant molecules and hydrolysis/condensation reactions across the phase boundary of the interface of two immiscible liquids controls the morphology of the microspheres and the size of TiO 2 nanoparticles. The silica/titania composite microspheres show excellent thermal stability against the anatase to rutile phase transition caused by inhibition of the growth of TiO 2 nanoparticles due to proximity of the silica nanoparticles. The photoelectrochemical measurements show that TiO 2 -SiO 2 microspheres exhibit superior photocatalytic characteristics compared to the TiO 2 microspheres. The kinetics of dye degradation for TiO 2 -SiO 2 microspheres is found to be significantly faster compared to TiO 2 microspheres which confirms the superior photocatalytic properties of the composite microspheres.