Search

Atomic force microscopy (AFM) imaging was used to study swelling of individual bilayer graphene oxide (GO) flakes in water and ethanol vapors. We found that within 5 days after sample deposition the swelling of bilayered Hummers GO (HGO) in ethanol vapors disappears nearly completely, whereas the swelling in water remains not affected. Swelling can therefore be used as a sensitive indicator of rapid aging of bilayered HGO, which occurs both in air and under inert gas. The surprising ability of 5-days-aged bilayered HGO to swell in water but not in ethanol fits to the effects observed in μm-thick GO membranes after several years of aging. Remarkably, bilayered Brodie GO (BGO) maintains swelling in ethanol after storing it under the same conditions as HGO. Moreover, we demonstrate that AFM can be used to detect hole defects in individual GO sheets. The BGO bilayer swelling in ethanol vapors starts either on the flake edges or in very few points, forming ∼2 Å height fronts, which propagate slowly within interlayer spaces in all directions. The increase of the average distance between HGO sheets occurs simultaneously all over the flake, demonstrating a high abundance of hole defects. Our results imply that the permeation path length in HGO membranes must be significantly shorter compared to BGO, which is important to take into account in the modeling of membrane permeation.

Interfacial water is a widespread lubricant down to the nanometer scale. We investigate the lubricities of molecularly thin H2O and D2O films confined between mica and graphene, via the relaxation of initially applied strain in graphene employing Raman spectroscopy. Surprisingly, the D2O films are at least 1 order of magnitude more lubricant than H2O films, despite the similar bulk viscosities of the two liquids. We propose a mechanism based on the known selective permeation of protons vs deuterons through graphene. Permeated protons and left behind hydroxides may form ion pairs clamping across the graphene sheet and thereby hindering the graphene from sliding on the water layer. This explains the lower lubricity but also the hindering diffusivity of the water layer, which yields a high effective viscosity in accordance with findings in dewetting experiments. Our work elucidates an unexpected effect and provides clues to the behavior of graphene on hydrous surfaces.

Understanding and controlling charge transfer through molecular nanostructures at interfaces is of paramount importance, particularly for electronic devices but also for contact electrification or in bioelectronics. We investigate the influence of intercalation and exchange of molecularly thin layers of small molecules (water, ethanol, 2-propanol, and acetone) on charge transfer at the well-defined interface between an insulator (muscovite mica) and a conductor (graphene). Raman spectroscopy is used to probe the charge carriers in graphene. While a molecular layer of water blocks charge transfer between mica and graphene, a layer of the organic molecules allows for it. The exchange of molecular water layers with ethanol layers switches the charge transfer very efficiently from off to on and back. We propose a charge transfer model between occupied mica trap states and electronic states of graphene, offset by the electrostatic potentials produced by the molecular dipole layers, as supported by molecular dynamics simulations. Our work demonstrates how intercalation of molecules of volatile liquids can reversibly affect charge transfer at interfaces. This implies its strong impact on the function of hybrid inorganic-organic electronic devices in different ambients and potential applications, including sensors and actuators.

We thank the German Science Foundation (DFG) for financial support within the grants SFB 765 and SFB 658. M.F.G. and J.P.R. also acknowledge the support of the Cluster of Excellence “Matters of Activity. Image Space Material” funded by the DFG under Germany’s Excellence Strategy EXC 2025-390648296. Furthermore, A.T. acknowledges the DFG for funding within the project TH 1463/12-1. We thank Dr. Andreas Schäfer and Maiko Schulze for solid NMR experiments and we appreciate the effort of Vahid Ahmadi Soureshjani in MALDI-TOF experiments. We acknowledge M. Eng. Jörg M. Stockmann for operating the XPS instrument at the BAM and Prof. Stephanie Reich and Dr. Antonio Setaro for fruitful discussions. 2DTs-HRTEM and -EELS studies were conducted at the Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, Universidad de Zaragoza, Spain. R.A. gratefully acknowledges the support from the Spanish Ministry of Economy and Competitiveness (MINECO) through project grant MAT2016-79776-P (AEI/FEDER, UE) and from the European Union H2020 programs ETN projects “Graphene Flagship” (785219 and 881603), FLAG-ERA - Graphene (MICINN) GATES (PCI2018-093137) and “ESTEEM3” (823717).

Macrocyclic oligothiophenes and their π-expanded derivatives constitute versatile building blocks for the design of (supra)molecularly engineered active interfaces, owing to their structural, chemical, and optoelectronic properties. Here, it is demonstrated how resonant tunneling effect induces single molecular isomerization in a 2D crystal, self-assembled at solid-liquid interfaces under ambient conditions. Monolayers of a series of four π-expanded oligothiophene macrocycles are investigated by means of scanning tunneling microscopy and scanning tunneling spectroscopy (STS) at the interface between their octanoic acid solutions and the basal plane of highly oriented pyrolytic graphite. Current-voltage characteristics confirm the donor-type character of the macrocycles, with the highest occupied molecular orbital and the lowest unoccupied molecular orbital (LUMO) positions consistent with time-dependent density functional theory calculations. Cyclic STS measurements show the redox isomerization from Z,Z-8T6A to its isomer E,E-8T6A occurring in the 2D crystal, due to the formation of a negatively charged species when the tunneling current is in resonance with the LUMO of the macrocycle.

On 12 December 2019, our colleague and friend Professor Dr. Gerhard H. Findenegg (cf. Figure 1) passed away after just having completed the eighty-first year of his life. He leaves behind his wife Irmgard Findenegg-Gröll with whom he was married for fifty-four years, their three daughters Klara, Helene, and Eva with their spouses, and seven grandchildren. The Findenegg family lost a loving and caring husband, father, father-in-law, and grandfather who cannot be replaced. At the moment of writing this foreword our thoughts are once again with Gerhard's family.

By design, coupled mechanical oscillators offer a playground for the study of crystalline topology and related properties. Particularly, non-centrosymmetric, supramolecular nanocrystals feature a complex phonon spectrum where edge modes may evolve. Here we show, employing classical atomistic calculations, that the edges of a chiral supramolecular nanoribbon can host defined edge phonon states. We suggest that the topology of several edge modes in the phonon spectrum is nontrivial and thermally insulated from bulk states. By means of molecular dynamics, we excite a supramolecular bond to launch a directional excitation along the edge without considerable bulk or back-propagation. Our results suggest that supramolecular monolayers can be employed to engineer phonon states that are robust against backscattering, toward supramolecular thermal waveguides, diodes, and logics.

Recently, many studies have been focused on the development of graphene-based biosensors. However, they rely on one type of signal and need to be calibrated by other techniques. In this study, a nonenzymatic graphene-based biosensor has been designed and constructed. Its ability to detect glucose and Escherichia coli by three different types of signals has been investigated. For its preparation, dopamine-functionalized polyethylene glycol and 2,5-thiophenediylbisboronic acid were conjugated onto the surface of graphene sheets by nitrene [2 + 1] cycloaddition and condensation reactions, respectively. Multivalent interactions between boronic acid segments and biosystems consequently increased the quantifiable fluorescence emission and UV absorption of dopamine segments. Additionally, changing the electrochemical behavior of the functionalized graphene sheets was possible and resulted in a measurable output signal. Conjugation of mannose onto the surface of the biosensor improved its magnitude of signals and specificity for sensing E. coli in a complex medium. The efficiency and accuracy of each signal was monitored by others, which resulted in a real-time self-calibrating biosensor. Taking advantage of the versatility of the three different indicators, including florescence, UV, and electrochemistry, the functionalized graphene sheets have been used as self-regulating biosensors to detect a variety of biosystems with a high accuracy and specificity in a short time.

The adsorption of three different polycations at the negatively charged surface of tubular J-aggregates of the amphiphilic cyanine dye 3,3′-bis(2-sulfopropyl)-5,5′,6,6′-tetrachloro-1,1′-dioctylbenzimidacarbocyanine (C8S3) is investigated by means of cryogenic electron microscopy and optical absorption spectroscopy. All three polycations could be adsorbed at the tubular aggregates without flocculation or precipitation when added in molar amounts of monomers sufficiently smaller than that of the dye molecules. It is found that preferably, a minority of aggregates is coated by the polycations while a majority of aggregates is left uncoated. For the coated aggregates, the adsorption leads to charge reversal of the aggregate surface as supported by zeta potential measurements. The morphology of the coating differs significantly for the three polycations: The branched polycation polyethylenimine (PEI) attaches to the tubular aggregate by hit-and-stick adsorption of the coiled state in solution forming irregular clot-like coatings; the flexible and weakly cationic poly (allylamine hydrochloride) (PAH) forms a more homogeneous coating but destroys the integrity of the dye aggregate; the more hydrophobic and strong polycation poly (diallyldimethylammonium chloride) (PDADMAC) forms a thin and homogeneous layer, supposedly by wrapping around the tubular aggregate. For the latter growth of a second double layer of dyes is observed for the aggregates. The different morphologies of the coating layers are explained by the details of the chemical structure of the polycations. The possible adsorption of polyelectrolytes at these amphiphilic tubular structures, stabilized by means of hydrophobic forces, is far from obvious and demonstrates an applicable route to the build-up of more complex nanostructures in solution by means of a self-assembly process.

Humidity influences friction in layered materials in peculiar ways. For example, while water improves the lubricating properties of graphite, it deteriorates those of molybdenum disulfide (MoS2). The reasons remain debated, not the least due to the difficulty in experimentally comparing dry and hydrated interface frictions. Here we show that the hydration of interfaces between a mica substrate and single-layers of graphene and MoS2 with a molecularly thin water layer affects strain transfer from the substrate to the 2D materials. For this, we strain the substrate and detect strain in graphene and MoS2 by changes in Raman and photoluminescence spectra, respectively. Strain relaxation in graphene changes from stick-slip in dry contact, to viscous when hydrated. In contrast, there is no viscous relaxation in MoS2 regardless of hydration. Our work provides a novel approach for better understanding the impact of hydration on friction in layered materials.

2D nanomaterials have garnered widespread attention in biomedicine and bioengineering due to their unique physicochemical properties. However, poor functionality, low solubility, intrinsic toxicity, and nonspecific interactions at biointerfaces have hampered their application in vivo. Here, biocompatible polyglycerol units are crosslinked in two dimensions using a graphene‐assisted strategy leading to highly functional and water‐soluble polyglycerols nanosheets with 263 ± 53 nm and 2.7 ± 0.2 nm average lateral size and thickness, respectively. A single‐layer hyperbranched polyglycerol containing azide functional groups is covalently conjugated to the surface of a functional graphene template through pH‐sensitive linkers. Then, lateral crosslinking of polyglycerol units is carried out by loading tripropargylamine on the surface of graphene followed by lifting off this reagent for an on‐face click reaction. Subsequently, the polyglycerol nanosheets are detached from the surface of graphene by slight acidification and centrifugation and is sulfated to mimic heparin sulfate proteoglycans. To highlight the impact of the two‐dimensionality of the synthesized polyglycerol sulfate nanosheets at nanobiointerfaces, their efficiency with respect to herpes simplex virus type 1 and severe acute respiratory syndrome corona virus 2 inhibition is compared to their 3D nanogel analogs. Four times stronger in virus inhibition suggests that 2D polyglycerols are superior to their current 3D counterparts., A 2D hyperbranched polyglycerol and its sulfated counterpart are synthesized using a graphene‐assisted strategy. The synthesized 2D polymers are used to inhibit the infection by severe acute respiratory syndrome corona virus 2 and show an inhibitory concentration as low as 3 nm.

Funding Information: The authors thank Benjamin I. Weintrub, Nele Stetzuhn, and Abhijeet Kumar for their great comments on the paper. The authors acknowledge the German Research Foundation (DFG) for financial support through the Collaborative Research Center TRR 227 Ultrafast Spin Dynamics (project B08), SfB 951 (projects A6, A12, B15, Z2). AVK further thanks DFG (projects KR 4866/6‐1 and SFB‐1415‐417590517) for support. The authors thank HRLS Stuttgart, Germany, and TU Dresden (Taurus cluster) for generous grants of computing time. Publisher Copyright: © 2022 The Authors. Advanced Functional Materials published by Wiley-VCH GmbH. A new localized excitonic state is demonstrated in patterned monolayer 2D semiconductors. The signature of an exciton associated with that state is observed in the photoluminescence spectrum after electron beam exposure of several 2D semiconductors. The localized state, which is distinguished by non-linear power dependence, survives up to room temperature and is patternable down to 20 nm resolution. The response of the new exciton to the changes of electron beam energy, nanomechanical cleaning, and encapsulation via multiple microscopic, spectroscopic, and computational techniques is probed. All these approaches suggest that the state does not originate from irradiation-induced structural defects or spatially non-uniform strain, as commonly assumed. Instead, it is shown to be of extrinsic origin, likely a charge transfer exciton associated with the organic substance deposited onto the 2D semiconductor. By demonstrating that structural defects are not required for the formation of localized excitons, this workopens new possibilities for further understanding of localized excitons as well as their use in applications that are sensitive to the presence of defects, e.g. chemical sensing and quantum technologies.

Amphiphilic cyanine dyes in aqueous solution self-assemble into J-aggregates with diverse structures. In particular, the dye 3,3′-bis(3-sulfopropyl)-5,5′,6,6′-tetrachloro-1,1′-dioctylbenzimida-carbo-cyanine (C8S3) forms micrometer long double walled tubular J-aggregates with a uniform outer diameter of 13 ± 0.5 nm. Interestingly, these J-aggregates exhibit strong exciton delocalization and migration, similar to natural light harvesting systems. However, their structural integrity and hence their optical properties are very sensitive to their chemical environment as well as to mechanical deformation, rendering detailed studies on individual tubular J-aggregates difficult. We addressed this issue and examined a previously published route for their chemical and mechanical stabilization by in situ synthesis of a silica coating that leaves their absorbance and emission unaltered in solution. Here, we demonstrate that the silica shell with a thickness of a few nanometers is able to stabilize the tubular J-aggregates of C8S3 against changes of pH of solutions down to values where pure aggregates are oxidized, against drying under ambient conditions, and even against the vacuum conditions within an electron microscope. Dried silica–covered aggregates are brittle, as demonstrated by manipulation with a scanning force microscope on a surface. Transmission electron microscope images confirm that the thickness of the coatings is homogeneous and uniform with a thickness of less than 5 nm; scanning TEM energy dispersive X-ray spectroscopy confirms the chemical composition of the shell as SiO2; and electron energy loss spectra could be recorded across a single freely suspended aggregate. Such a silica shell may not only serve for stabilization but also could be the base for further functionalization of the aggregates by either chemical attachment of other units on top of the shell or by inclusion during the synthesis.

Physisorbed self-assembled monolayers (SAMs) have been suggested as potential models for three-dimensional (3D) crystallization. This work studies the effect of altering the chain length of 5-alkoxyisophthalic acid (C nISA) on self-assembled morphology in both two-dimensional (2D) and 3D to explore the extent comparisons can be drawn between dimensions. Previous studies of 5-alkoxyisophthalic acid at solid-liquid interfaces (2D) reported different morphologies for C5ISA and C6ISA-alkoxy chains on the one hand and C10ISA and C18ISA on the other. Independently, also in 3D a dependence of morphology on chain length has been reported, including an unexpected inclusion of a solvent in the 3D morphology of C6ISA, while the previous reports of 2D self-assembly were driven only by molecule-molecule and molecule-substrate interactions. However, a complete set of data for comparison has been missing. Here, we report scanning tunneling microscopy (STM) and molecular dynamics simulations performed for C2ISA self-assembled monolayers (SAMs) and STM imaging of C6ISA-C9ISA SAMs, to further examine self-assembly behavior in 2D. In 3D, X-ray diffraction analysis of C2ISA single crystals was carried out to complete the data set. With a complete set of data, it was observed that regardless of the dimension, short-chain-length C nISAs formed H-bonding-dominated structures, mid-chain-length C nISAs exhibited solvent-dependent morphologies, and long-chain-length C nISAs displayed van der Waals-dominated solvent-independent structures. However, the transition point among morphologies occurred at different chain lengths in 2D and 3D regardless of the dominant interaction. The results of this study inform the design of 2D films and guide the application of knowledge from physisorbed SAMs to 3D systems, including mixed-dimensional (2D/3D) van der Waals heterostructures.

A controlled, reproducible, gram‐scale method is reported for the covalent functionalization of graphene sheets by a one‐pot nitrene [2+1] cycloaddition reaction under mild conditions. The reaction between commercially available 2,4,6‐trichloro‐1,3,5‐triazine and sodium azide with thermally reduced graphene oxide (TRGO) results in defined dichlorotriazine‐functionalized sheets. The different reactivities of the chlorine substituents on the functionalized graphene allow stepwise post‐modification by manipulating the temperature. This new method provides unique access to defined bifunctional 2D nanomaterials, as exemplified by chiral surfaces and multifunctional hybrid architectures.

Graphene and flat gold have both been argued to enhance Raman scattering of molecular adsorbates through a chemical mechanism. Here we show that these two effects can add to each other. For Cu-phthalocyanine in between graphene and Au(111) on mica a Raman enhancement up to 68-fold has been observed.

Carbon-based architectures, especially graphene and its derivatives, have recently attracted much attention in the field of biomedicine and biotechnology for their use as pathogen inhibitors or biosensors. One of the major problems in the development of novel virus inhibitor systems is the adaption of the inhibitor to the size of virus particles. We here report the synthesis and biological testing of carbon-based inhibitors differing in size for evaluating the potential size effect on the inhibition of virus entry and replication. In this context, different sized nanomaterials were functionalized with polygylcerol through a "grafting from" polymerization to form new polyvalent nanoarchitectures which can operate as viral inhibitor systems after post-modification. For this purpose a polysulfation was carried out to mimic the heparan sulfates present on cell surfaces that we reasoned would compete with the binding sites of herpes simplex virus type 1 (HSV-1) and equine herpesvirus type 1 (EHV-1), which both cause major global health issues. Our results clearly demonstrate that the inhibitory efficiency is regulated by the size of the polymeric nanomaterials and the degree of sulfation. The best inhibiting graphene sheets were ∼300 nm in size and had a degree of sulfation of ∼10%. Furthermore, it turned out that the derivatives inhibited virus infection at an early stage during entry but did not affect cell-to-cell spread. Overall, tunable polyvalent nanomaterials are promising and efficient virus entry inhibitors, which can likely be used for a broad spectrum of enveloped viruses.

The addition of zinc oxide (ZnO) to sulfur (S-) vulcanized rubbers is known to accelerate the cross-linking kinetics and to increase the heterogeneity of the cross-link density. However, the spatial distribution of cross-links is hardly known and the mechanism of the activity of ZnO is disputed. We therefore investigated S-vulcanized butadiene-styrene rubber comprising ZnO particles. The samples were fractured and then investigated employing the nano-mechanical mapping mode (NM) of scanning force microscopy (SFM), supported by scanning electron microscopy (SEM). We find that rubber around the ZnO particles exhibits a higher Young's modulus in a shell with a width up to about 200 nm. Furthermore, the extension and retraction curves on these shells exhibit a smaller hysteresis than on the rubber further away from the ZnO particles. We attribute the higher Young's modulus and the smaller hysteresis to a higher cross-link density in rubber surrounding the ZnO particles and we discuss a mechanism of the activity of ZnO in rubbers which can explain this.

Optical and electrical properties of two-dimensional transition metal dichalcogenides (TMDCs) grown by chemical vapor deposition (CVD) are strongly determined by their microstructure. Consequently, the visualization of spatial structural variations is of paramount importance for future applications. Here we demonstrate how grain boundaries, crystal orientation, and strain fields can unambiguously be identified with combined lateral force microscopy (LFM) and transverse shear microscopy (TSM) for CVD-grown tungsten disulfide (WS2) monolayers, on length scales that are relevant for optoelectronic applications. Further, angle-dependent TSM measurements enable us to acquire the fourth-order elastic constants of monolayer WS2 experimentally. Our results facilitate high-throughput and nondestructive microstructure visualization of monolayer TMDCs, insights into their elastic properties, thus providing an accessible tool to support the development of advanced optoelectronic devices based on such two-dimensional semiconductors.

Efficient inhibition of cell-pathogen interaction to prevent subsequent infection is an urgent but yet unsolved problem. In this study, the synthesis and functionalization of novel multivalent 2D carbon nanosystems as well as their antiviral efficacy in vitro are shown. For this reason, a new multivalent 2D flexible carbon architecture is developed in this study, functionalized with sulfated dendritic polyglycerol, to enable virus interaction. A simple "graft from" approach enhances the solubility of thermally reduced graphene oxide and provides a suitable 2D surface for multivalent ligand presentation. Polysulfation is used to mimic the heparan sulfate-containing surface of cells and to compete with this natural binding site of viruses. In correlation with the degree of sulfation and the grafted polymer density, the interaction efficiency of these systems can be varied. In here, orthopoxvirus strains are used as model viruses as they use heparan sulfate for cell entry as other viruses, e.g., herpes simplex virus, dengue virus, or cytomegalovirus. The characterization results of the newly designed graphene derivatives demonstrate excellent binding as well as efficient inhibition of orthopoxvirus infection. Overall, these new multivalent 2D polymer nanosystems are promising candidates to develop potent inhibitors for viruses, which possess a heparan sulfate-dependent cell entry mechanism.

Designing molecular p-n heterojunction structures, i.e., electron donor-acceptor contacts, is one of the central challenges for further development of organic electronic devices. In the present study, a well-defined p-n heterojunction of two representative molecular semiconductors, pentacene and C60, formed on the single-crystal surface of pentacene is precisely investigated in terms of its growth behavior and crystallographic structure. C60 assembles into a (111)-oriented face-centered-cubic crystal structure with a specific epitaxial orientation on the (001) surface of the pentacene single crystal. The present experimental findings provide molecular scale insights into the formation mechanisms of the organic p-n heterojunction through an accurate structural analysis of the single-crystalline molecular contact.

Understanding the nanoscale structure and dynamics of supramolecular hydrogels is essential for exploiting their self-healing mechanisms. We describe here nanostructural evolution and self-healing mechanism of hydrogels formed from in situ generated hydrophobically modified hydrophilic polymers and wormlike sodium dodecyl sulfate (SDS) micelles. We observe a conformational transition in wormlike SDS micelles upon addition of hydrophobic as well as hydrophilic monomers. Several hundred nanometer long SDS micelles completely disappear after the monomer addition, in favor of spherical micelles with a radius of 2.4 nm. After conversion of the monomers to hydrophobically modified polymer chains via micellar copolymerization, the spherical shape of the micelles remains intact but the radius increases to 2.8 nm. The interconnected spherical mixed micelles consisting of SDS and hydrophobic blocks of the polymer self-assemble to form a layered hydrogel structure. Self-healing response of the damaged hydrogel sampl...

Porous MgF2-over-nanoparticles (MON) surfaces are fabricated from immobilized gold nanoparticles of different sizes on a glass surface by coating them with a magnesium fluoride layer. High mechanical stability of the resulting plasmonic surface is obtained, and optical spectroscopy across a very wide optical window is enabled. The nanoscopic characterization by scanning force microscopy and electron microscopy shows a uniform assembly of the gold nanoparticles in monolayers and a complete coating by magnesium fluoride. Surface-enhanced Raman scattering (SERS) experiments provide evidence that organic analyte molecules have free access to the gold surface, and interact with the immobilized nanoparticles in a very similar fashion as with uncoated surfaces. As the spectroscopic results indicate, the coating leads to properties that are favourable for plasmonic enhancement of optical processes excited in the visible and near-infrared. As demonstrated by experiments using SERS, as well as by finite difference time domain (3D-FDTD) simulations, enhancement factors are obtained that allow for analytical applications with optical excitations ranging from the visible to the near infrared.

Hydration of interfaces with a layer of water is a ubiquitous phenomenon, which has important implications for numerous natural and technologically important processes. Nevertheless, at the nanoscale, the understanding of the wetting process is still limited, since it is experimentally difficult to follow. Here, graphene and monolayers of MoS

Application of transition metal dichalcogenides (TMDC) in photonic, optoelectronic or valleytronic devices requires the growth of continuous monolayers, heterostructures and alloys of different materials in a single process. We present a facile pulsed thermal deposition method which provides precise control over layer thickness and stoichiometry of two-dimensional systems. The versatility of the method is demonstrated on ternary monolayers of Mo$_{1-x}$W$_{x}$S$_{2}$ and on heterostructures combining metallic TaS$_{2}$ and semiconducting MoS$_{2}$ layers. The fabricated ternary monolayers cover the entire composition range of $x$ = 0...1 without phase separation. Band gap engineering and control over the spin-orbit coupling strength is demonstrated by absorption and photoluminescence spectroscopy. Vertical heterostructures are grown without intermixing. The formation of clean and atomically abrupt interfaces is evidenced by high-resolution transmission electron microscopy. Since both the metal components as well as the chalcogenides are thermally evaporated complex alloys and heterostructures can thus be prepared.

The surfaces of influenza A virus (IAV) particles are packed with hundreds of homo-trimeric hemagglutinins (HAs). Monovalent sugars have low affinity for HA, but distance-optimized bivalent sialyl-LacNAc (SLN) conjugates bind it with 103 -fold enhanced potency. Herein, we describe the oligomerization of distance-optimized bivalent binders by branched and linear hybridization on long repetitive DNA templates. The most effective complexes fully inhibited IAVs at a DNA template concentration of 10-9 m. Although a 10-2 m concentration of free trisaccharide ligand is required for full inhibition of the virus, DNA templating enables a 104 -fold reduction in the amount of sugar required. Notably, hybridization-induced rigidification of the DNA templates increased the serospecificity. Cryo-TEM analysis revealed that both spaghetti-type linear forms and cotton-ball-like clusters are able to bridge several adjacent HA molecules on the IAV surface. Programmed self-assembly of ligand-nucleic acid conjugates on long DNA templates might provide generic access to target-specific, high-affinity binders of proteins on globular objects such as cells and viruses.

Silver iodide nanowires have been grown within tubular J-aggregates of the cyanine dye 3,3′-bis(2-sulfopropyl)-5,5′,6,6′-tetrachloro-1,1′-dioctylbenzimida-carbo-cyanine (C8S3) from aqueous AgNO3 solutions. Crystal structure analysis by selected area electron diffraction (SAED), high resolution transmission electron microscopy (HRTEM) and energy-dispersive X-ray spectroscopy (EDXS) of single nanowires revealed that they are of silver iodide (AgI), while previously they were presumed to be of metallic silver. Iodine has not been added intentionally, but it is a remnant from the chemical synthesis of the dye and present in a dye:iodine ratio of almost 2:1, as revealed by inductively coupled plasma mass spectrometry (ICP-MS). The AgI wires grow as single crystals with lengths of several 10–100 nm and width of 6.5 ± 0.5 nm. The width and the orientation of the crystal relative to the aggregate axis are defined by the tubular structure of the templating dye aggregate. Caused by the nucleation at the tube wall the main growth is not along the usually preferred [0 0 0 1] direction but along the extension of the basal plane, which is furthermore tilted by an angle of 6° ± 2° against the main axis of the aggregate. This self-assembled system represents an organic-inorganic hybrid system with a well-defined semiconductor nanowire, AgI, that is strictly oriented with respect to the aggregated phase of conjugated molecules.

The efficient preparation of four C3-symmetric (star-shaped) pyridine and bipyridine derivatives is reported. The key steps are Suzuki couplings of 4-pyridyl nonaflates with 4-acetyl-phenylboronic acid followed by an acid-promoted cyclocondensation reaction converting the methyl ketone moiety into the central benzene ring of the target compounds. Based on STM studies at a graphite–solution interface the two-dimensional arrangements of the compounds are discussed, showing the influence of the pyridine substitution pattern.

Two isomers of a multifunctional π-expanded macrocyclic oligothiophene 8-mer, E,E-1 and Z,Z-1, were synthesized using a McMurry coupling of a dialdehyde composed of four 2,5-thienylene and three ethynylene units under high dilution conditions. On the other hand, cyclo[8](2,5-thienylene-ethynylene) 2 was synthesized by intramolecular Sonogashira cyclization of ethynyl bromide 5. From STM measurements, both E,E-1 and Z,Z-1 formed self-assembled monolayers at the solid–liquid interface to produce porous networks, and from X-ray analyses of E,E-1 and 2, both compounds had a round shape with a honeycomb stacked structure. E,E-1 formed various fibrous polymorphs due to nanophase separation of the macrorings. E,E-1 and Z,Z-1 in solution exhibited photochromism upon irradiation with visible and UV light, respectively, and this photoisomerization was confirmed by using STM. Furthermore, amorphous films of Z,Z-1 and E,E-1 showed photoisomerization, although single crystals, fibers, and square tubes of E,E-1 remaine...

Single strands of azobenzene main chain polymers exhibiting alkyl side chains can be largely and reversibly contracted and extended with light. We show that upon self-assembly in a thin layered film they act as “molecular zippers” that can be opened and closed with UV- and blue light, respectively. Simultaneously in situ recorded time-resolved X-ray diffraction and optical spectroscopy measurements, together with scanning force microscopy show that upon the light-induced E → Z isomerization of the main chain azobenzenes the layered film morphology remains, while the initially highly ordered alkyl side chains become disordered. Already the E → Z isomerization of about 20% of all azobenzene chromophores triggers a complete disorder of the alkyl chains. The kinetics of this partial amorphization of the film is about 18 times slower than the ensemble kinetics of the initial azobenzene photoisomerization. This is the first demonstration of a rigid main chain polymer film with reversibly photoswitchable side ch...

Biomolecular systems are commonly exposed to a manifold of forces, often acting between multivalent ligands. To understand these forces, we studied mono- and bivalent model systems of pyridine coordination complexes with Cu2+ and Zn2+ in aqueous environment by means of scanning force microscopy based single-molecule force spectroscopy in combination with ab initio DFT calculations. The monovalent interactions show remarkably long rupture lengths of approximately 3 A that we attribute to a dissociation mechanism involving a hydrogen-bound intermediate state. The bivalent interaction with copper dissociates also via hydrogen-bound intermediates, leading to an even longer rupture length between 5 and 6 A. Although the bivalent system is thermally more stable, the most probable rupture forces of both systems are similar over the range of measured loading rates. Our results prove that already in small model systems the dissociation mechanism strongly affects the mechanical stability. The presented approach off...

Control over nanoscale patterning of ultrathin molecular films plays an important role both in natural as well as artificial nanosystems. Here we report on nanophase separated patterns of water and ethanol within monomolecularly thin films confined between the cleavage plane of mica and single or a few layers of graphene. Employing scanning force microscopy of the graphene layers conforming to the molecular films we quantify the patterns using the ethanol-water cross correlation and the autocorrelation of domain wall directions. They reveal that lateral pattern dimensions grow and the domain walls stiffen upon increasing the thickness of the graphene multilayers. We attribute the control of the patterns through the graphene layers to the competition between the mechanical deformation energy of the graphene sheets and the electrostatic repulsion of dipoles normal to the interface. The latter results from charge transfer between graphene and the molecules confined between mica and graphene.

Resonant coupling between distinct excitons in organic supramolecular assemblies and inorganic semiconductors is supposed to offer an approach to optoelectronic devices. Here, we report on colloidal nanohybrids consisting of self-assembled tubular J-aggregates decorated with semiconductor quantum dots (QDs) via electrostatic self-assembly. The role of QDs in the energy transfer process can be switched from a donor to an acceptor by tuning its size and thereby the excitonic transition energy while keeping the chemistry unaltered. QDs are located within a close distance (4 nm) to the J-aggregate surface, without harming the tubular structures and optical properties of J-aggregates. The close proximity of J-aggregates and QDs allows the strong excitation energy transfer coupling, which is around 92% in the case of energy transfer from the QD donor to the J-aggregate acceptor and approximately 20% in the reverse case. This system provides a model of an organic-inorganic light-harvesting complex using methods of self-assembly in aqueous solution, and it highlights a route toward hierarchical synthesis of structurally well-defined supramolecular objects with advanced functionality.

Graphite oxide (GO) in liquid acetonitrile undergoes a transition from an ordered phase around ambient temperature to a gel-like disordered phase at temperatures below 260 K, as demonstrated by in situ X-ray diffraction. The stacking order of GO layers is restored below the freezing point of acetonitrile (199 K). The reversible swelling transition between a stacked crystalline phase and an amorphous delaminated state observed upon cooling provides an unusual example of increased structural disorder at lower temperatures. The formation of the gel-like phase is attributed to the thermo-responsive conformational change of individual GO flakes induced by stronger solvation. Scanning force microscopy demonstrates that GO flakes deposited onto a solid substrate from acetonitrile dispersions at a temperature below 260 K exhibit corrugations and wrinkling which are not observed for the flakes deposited at ambient temperature. The thermo-responsive transition between the delaminated and stacked phases reported here can be used for sonication-free dispersion of graphene oxide, micro-container applications, or the preparation of new composite materials.

The simulation of the optical properties of supramolecular aggregates requires the development of methods, which are able to treat a large number of coupled chromophores interacting with the environment. Since it is currently not possible to treat large systems by quantum chemistry, the Frenkel exciton model is a valuable alternative. In this work we show how the Frenkel exciton model can be extended in order to explain the excitonic spectra of a specific double-walled tubular dye aggregate explicitly taking into account dispersive energy shifts of ground and excited states due to van der Waals interaction with all surrounding molecules. The experimentally observed splitting is well explained by the site-dependent energy shift of molecules placed at the inner or outer side of the double-walled tube, respectively. Therefore we can conclude, that inclusion of the site-dependent dispersive effect in the theoretical description of optical properties of nanoscaled dye aggregates is mandatory., 8 pages, 5 figures

Scanning force microscopy (SFM) and Raman spectroscopy allow the unraveling of charge doping and strain effects upon wetting and dewetting of a graphene-mica slit pore with water. SFM reveals a wetting monolayer of water, slightly thinner than a single layer of graphene. The Raman spectrum of the dry pore exhibits the ${D}^{\ensuremath{'}}$ peak of graphene, which practically disappears upon wetting, and recurs when the water layer dewets the pore. Based on the $2D$- and $G$-peak positions, the corresponding peak intensities, and the widths, we conclude that graphene on dry mica is charge-doped and variably strained. A monolayer of water in between graphene and mica removes the doping and reduces the strain. We attribute the ${D}^{\ensuremath{'}}$ peak to direct contact of the graphene with the ionic mica surface in dry conditions, and we conclude that a complete monolayer of water wetting the slit pore decouples the graphene from the mica substrate both mechanically and electronically.

We study nucleation and multilayer growth of the perylene derivative PTCDI-C

The journal of chemical physics 146(5), 052803 - (2017). doi:10.1063/1.4961460, We study nucleation and multilayer growth of the perylene derivative PTCDI-C$_8$ and find a persistent layer-by-layer growth, transformation of island shapes, and an enhancement of molecular diffusivity in upper monolayers (MLs). These findings result from the evaluation of the ML-dependent island densities, obtained by in situ real-time grazing incidence small angle X-ray scattering measurements and simultaneous X-ray growth oscillations. Complementary ex situ atomic force microscopy snapshots of different growth stages agree quantitatively with both X-ray techniques. The rate and temperature-dependent island density is analyzed using different mean-field nucleation models. Both a diffusion limited aggregation and an attachment limited aggregation model yield in the first two MLs the same critical nucleus size i, similar surface diffusion attempt frequencies in the 10$^{19}$-10$^{20}$ s$^{−1}$ range, and a decrease of the diffusion barrier E$_d$ in the 2nd ML by 140 meV., Published by American Institute of Physics, Melville, NY

Polyethylene glycol (PEG) is a structurally simple and nontoxic water-soluble polymer that is widely used in medical and pharmaceutical applications as molecular linker and spacer. In such applications, PEG's elastic response against conformational deformations is key to its function. According to text-book knowledge, a polymer reacts to the stretching of its end-to-end separation by a decrease in entropy that is due to the reduction of available conformations, which is why polymers are commonly called entropic springs. By a combination of single-molecule force spectroscopy experiments with molecular dynamics simulations in explicit water, we show that entropic hydration effects almost exactly compensate the chain conformational entropy loss at high stretching. Our simulations reveal that this entropic compensation is due to the stretching-induced release of water molecules that in the relaxed state form double hydrogen bonds with PEG. As a consequence, the stretching response of PEG is predominantly of energetic, not of entropic, origin at high forces and caused by hydration effects, while PEG backbone deformations only play a minor role. These findings demonstrate the importance of hydration for the mechanics of macromolecules and constitute a case example that sheds light on the antagonistic interplay of conformational and hydration degrees of freedom.

The microstructure, morphology, and growth dynamics of hexa-peri-hexabenzocoronene (HBC, C42H18) thin films deposited on inert substrates of similar surface energies are studied with particular emphasis on the influence of substrate symmetry and substrate-molecule lattice matching on the resulting films of this material. By combining atomic force microscopy (AFM) with X-ray diffraction (XRD), X-ray absorption spectroscopy (NEXAFS), and in situ X-ray reflectivity (XRR) measurements, it is shown that HBC forms polycrystalline films on SiO2, where molecules are oriented in an upright fashion and adopt the known bulk structure. Remarkably, HBC films deposited on highly oriented pyrolytic graphite (HOPG) exhibit a new, substrate-induced polymorph, where all molecules adopt a recumbent orientation with planar π-stacking. Formation of this new phase, however, depends critically on the coherence of the underlying graphite lattice since HBC grown on defective HOPG reveals the same orientation and phase as on SiO2. These results therefore demonstrate that the resulting film structure and morphology are not solely governed by the adsorption energy but also by the presence or absence of symmetry- and lattice-matching between the substrate and admolecules. Moreover, it highlights that weakly interacting substrates of high quality and coherence can be useful to induce new polymorphs with distinctly different molecular arrangements than the bulk structure.

Synthetic rigid-rod polymers incorporating multiple azobenzene photoswitches in the backbone were deposited from solution onto a monolayer of octadecylamine covering the basal plane of graphite. Large contractions and extensions of the single macromolecules on the surface were induced by irradiation with UV and visible light, respectively, as visualized by scanning force microscopy. Upon contraction, the single polymer chains form more compact nanostructures and also may move across the surface, resembling a crawling movement. We attribute the efficiency of these processes to the low mechanical and electronic coupling between the surface and polymers, the high density of azobenzenes in their backbones, and their rigidity, allowing for maximized photodeformations. The visualization of on-surface motions of single macromolecules directly induced by light, as reported herein, could help promote the development of optomechanical nanosystems.

Hybrid nanostructures consisting of dye molecules and semiconducting nanocrystals are currently much investigated because they can benefit from the strong absorption of organic dyes and the chemical stability of inorganic components, a combination of properties that is promising for various optoelectronic applications. Here, we report an in situ synthesis method to design hybrid nanotubes by growing metal sulfide (MeS) nanocrystals at the surface of tubular J-aggregates of amphiphilic carbocyanine dyes. In this method, metal cations (Me2+ = Cd2+, Zn2+, and Ni2+) are enriched at the negatively charged surface of J-aggregates via electrostatic attraction, giving rise to a diffuse Helmholtz layer. Subsequent addition of thioacetamide and ammonium hydroxide leads to the formation of a dense layer of MeS nanocrystals exclusively close to or at the surface of J-aggregates. Typically, a shell of CdS nanocrystals (size ∼ 3 nm) is formed at the surface of tubular J-aggregates without significantly affecting the aggregate morphology. The crystal structure is analyzed by electron diffraction revealing a sphalerite structure. The coverage of CdS nanocrystals on J-aggregates can be tuned by varying the concentration of the sulphur source. Efficient energy transfer from CdS nanocrystals to J-aggregates results in the quenching of the CdS photoluminescence. Structurally and morphologically similar hybrid systems of tubular J-aggregates and semiconductor nanocrystals (e.g., ZnS and NiS) are synthesized by analog chemical reactions.

The matrix protein M1 plays a pivotal role in the budding of influenza virus from the plasma membrane (PM) of infected cells. This protein interacts with viral genetic material and envelope proteins while binding to the inner leaflet of the PM. Its oligomerization is therefore closely connected to the assembly of viral components and the formation of new virions. Of interest, the molecular details of M1 interaction with lipids and other viral proteins are far from being understood, and it remains to be determined whether the multimerization of M1 is affected by its binding to the PM and interaction with its components. To clarify the connection between M1 oligomerization and binding to lipid membranes, we applied a combination of several quantitative microscopy approaches. First, we used number and brightness (N&B) microscopy to characterize protein multimerization upon interaction with the PM of living cells. Second, we used controlled biophysical models of the PM (i.e., supported bilayers) to delve into the details of M1-lipid and M1-M1 interactions by employing a combination of raster image correlation spectroscopy (RICS), fluorescence correlation spectroscopy (FCS), and atomic force microscopy (AFM). Our results show that M1 oligomer formation is strongly enhanced by membrane binding and does not necessarily require the presence of other viral proteins. Furthermore, we propose a specific model to explain M1 binding to the lipid bilayer and the formation of multimers.

Flexible and straightforward syntheses of a series of D3h- or C3h-symmetrical star-shaped compounds with pyridine end groups are reported. In all cases, the acid-mediated cyclocondensations of the corresponding aryl methyl ketone provided the central benzene ring. For the preceding preparation of the functionalized compound arms, Suzuki couplings were applied. The crucial introduction of the pyridine C-2 and C-6 substituents occurred by Fe(acac)3-catalyzed alkylations (acac = acetylacetonate). The preparation of the C3-symmetrical compound involved an alternating sequence of halogenations and coupling reactions. The self-assembly behavior of the four resulting star-shaped compounds at the interface between 1-phenyloctane and the basal plane of highly oriented pyrolytic graphite (HOPG) was studied by scanning tunnelling microscopy (STM). We found self-assembled monolayers with structures strongly dependent on the substitution patterns of the investigated compounds. The reduction of the symmetry from a D3h- to a C3h-symmetrical compound led to an entirely different self-assembly behavior with the change from a hexagonal to a lamellar arrangement.

The hydration of graphene oxide (GO) membranes is the key to understand their remarkable selectivity in permeation of water molecules and humidity-dependent gas separation. We investigated the hydration of single GO layers as a function of humidity using scanning force microscopy, and we determined the single interlayer distance from the step height of a single GO layer on top of one or two GO layers. This interlayer distance grows gradually by approximately 1 Å upon a relative humidity (RH) increase in the range of 2 to ∼80%, and the immersion into liquid water increases the interlayer distance further by another 3 Å. The gradual expansion of the single interlayer distance is in good agreement with the averaged distance measured by X-ray diffraction on multilayered graphite oxides, which is commonly explained with an interstratification model. However, our experimental design excludes effects connected to interstratification. Instead we determine directly if insertion of water into GO occurs strictly by monolayers or the thickness of GO layers changes gradually. We find that hydration with up to 80% RH is a continuous process of incorporation of water molecules into single GO layers, while liquid water inserts as monolayers. The similarity of hydration for our bilayer and previously reported multilayered materials implies GO few and even bilayers to be suitable for selective water transport.