404 results on '"Jönsson, Pär G."'
Search Results
2. Bio-based anode material production for lithium–ion batteries through catalytic graphitization of biochar: the deployment of hybrid catalysts
3. Energy Consumption and Greenhouse Gas Emissions of High-Carbon Ferrochrome Production
4. Carbon-negative valorization of biomass waste into affordable green hydrogen and battery anodes
5. Advanced application of a geometry-enhanced 3D-printed catalytic reformer for syngas production
6. Effect of ferrochromium (FeCr) and ferroniobium (FeNb) alloys on inclusion and precipitate characteristics in austenitic stainless steels
7. Continuous catalytic pyrolysis of biomass using a fluidized bed with commercial-ready catalysts for scale-up
8. Carbon and H2 recoveries from plastic waste by using a metal-free porous biocarbon catalyst
9. Driving investments in ore beneficiation and scrap upgrading to meet an increased demand from the direct reduction-EAF route
10. Influence of the porosity and acidic properties of aluminosilicate catalysts on coke formation during the catalytic pyrolysis of lignin
11. In situ catalytic fast pyrolysis of lignin over biochar and activated carbon derived from the identical process
12. Particle morphology of water atomised iron‑carbon powders
13. Effect of LCFeCr Alloy Additions on the Non-metallic Inclusion Characteristics in Ti-Containing Ferritic Stainless Steel
14. Evolution of the Non-metallic Inclusions Influenced by Slag-Metal Reactions in Ti-Containing Ferritic Stainless Steel
15. Hot Deformation Behaviour and Processing Map of Cast Alloy 825
16. Non-metallic Inclusions in Different Ferroalloys and Their Effect on the Steel Quality: A Review
17. Interfacial Phenomena and Inclusion Formation Behavior at Early Melting Stages of HCFeCr and LCFeCr Alloys in Liquid Iron
18. Study of the Hydration Behavior of Synthetic Ferropericlase with Low Iron Oxide Concentrations to Prevent Swelling in Steel Slags
19. The effects of oil/MWCNT nanofluids and geometries on the solid oxide fuel cell cooling systems: a CFD study
20. Pyrolysis performance of peat moss: A simultaneous in-situ thermal analysis and bench-scale experimental study
21. Pyrolysis and subsequent steam gasification of metal dry impregnated lignin for the production of H2-rich syngas and magnetic activated carbon
22. Utilization of fly ash and waste lime from pulp and paper mills in the Argon Oxygen Decarburization process
23. CFD study of non-premixed swirling burners: Effect of turbulence models
24. Numerical Analysis of Slag Transfer in the IronArc Process
25. The thermal degradation of lignocellulose biomass with an acid leaching pre-treatment using a H-ZSM-5/Al-MCM-41 catalyst mixture
26. Energy Consumption and Greenhouse Gas Emissions During Ferromolybdenum Production
27. Assessment of a Simplified Correlation Between Wettability Measurement and Dispersion/Coagulation Potency of Oxide Particles in Ferrous Alloy Melt
28. Alloy Design Optimization of Stainless Steel's Performance and Environmental Impact Through Taguchi‐Based Grey Relational Analysis.
29. Carbon-negative valorization of biomass waste into affordable green hydrogen and battery anodes
30. Two-stage ex-situ catalytic pyrolysis of lignocellulose for the production of gasoline-range chemicals
31. Characterization of Inclusions in 3rd Generation Advanced High-Strength Steels
32. High-Temperature Confocal Laser Scanning Microscopy Studies of Ferrite Formation in Inclusion-Engineered Steels: A Review
33. Time-varying losses in material flows of steel using dynamic material flow models
34. A simulation study of airborne wear particles from laboratory wheel-rail contacts
35. Evaluation of Engineered Biochar-Based Catalysts for Syngas Production in a Biomass Pyrolysis and Catalytic Reforming Process
36. From Waste Biomass to Hard Carbon Anodes: Predicting the Relationship between Biomass Processing Parameters and Performance of Hard Carbons in Sodium-Ion Batteries
37. Mathematical modelling of novel combined stirring method during the final stage of ladle refining
38. Effect of Ferrochromium (Fecr) and Ferroniobium (Fenb) Alloys on Inclusion and Precipitate Characteristics in Austenitic Stainless Steels
39. Numerical investigation of thermal performance augmentation of nanofluid flow in microchannel heat sinks by using of novel nozzle structure: sinusoidal cavities and rectangular ribs
40. Sintering behaviour of the protonic conductors BaZrxCe0.8-xLn0.2O3-δ (x=0.8, 0.5, 0.1; Ln=Y, Sm, Gd, Dy) during the solid-state reactive-sintering process
41. A Study of Oxygen Activities Before the Start of Solidification of Cast Irons
42. Ionic conductivity of dense BaZr0.5Ce0.3Ln0.2O3−δ (Ln = Y, Sm, Gd, Dy) electrolytes
43. Applications of Hydrochar and Charcoal in the Iron and Steelmaking Industry—Part 1: Characterization of Carbonaceous Materials
44. Characterization of non-metallic inclusions in corrosion -resistance nickel - based EP718 and 718 alloys by using electrolytic extraction method
45. Investigation of the Initial Corrosion Destruction of a Metal Matrix around Different Non-Metallic Inclusions on Surfaces of Pipeline Steels
46. Engineered Biochar as Catalysts for Syngas Production Via Biomass Pyrolysis Followed by Catalytic Reforming Process
47. Influence of the Porosity and Acidic Properties of Aluminosilicate Catalysts on Coke Formation During the Catalytic Pyrolysis of Lignin
48. Study of the Dissolution of Stainless-Steel Slag Minerals in Different Acid Environments to Promote Their Use for the Treatment of Acidic Wastewaters
49. Neutralization of Acidic Wastewater from a Steel Plant by Using CaO-Containing Waste Materials from Pulp and Paper Industries
50. A Study of Treatment of Industrial Acidic Wastewaters with Stainless Steel Slags Using Pilot Trials
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.