Search

Microbial contamination of fuels by fungi and bacteria presents risks of corrosion and fuel system fouling. In this work, a rapid test for the determination of microbial genomic DNA from aqueous fuel extracts is presented. It combines test strips coated with polystyrene core/mesoporous silica shell particles, to the surface of which modified fluorescent molecular beacons are covalently grafted, with a smartphone detection system. In the hairpin loop, the beacons incorporate a target sequence highly conserved in all bacteria, corresponding to a fragment of the 16S ribosomal RNA gene, which is also present to a significant extent in the 18S rRNA gene of fungi, allowing for broadband microbial detection. In the developed assay, the presence of genomic DNA extracts from bacteria and fungi down to ca. 20-50 μg L-1 induced a distinct fluorescence response. The optical read-out was adapted for on-site monitoring by combining a 3D-printed case with a conventional smartphone, taking advantage of the sensitivity of contemporary complementary metal oxide semiconductor (CMOS) detectors. Such an embedded assembly allowed to detect microbial genomic DNA in aqueous extracts down to ca. 0.2-0.7 mg L-1 and presents an important step toward the on-site uncovering of fuel contamination in a rapid and simple fashion.

Chlorination procedures are commonly applied in swimming pool water and wastewater treatment, yet also in food, pharmaceutical, and paper production. The amount of chlorine in water needs to be strictly controlled to ensure efficient killing of pathogens but avoid the induction of negative health effects. Miniaturized microfluidic fluorescence sensors are an appealing approach here when aiming at online or at-site measurements. Two meso-enamine-substituted boron dipyrromethene (BODIPY) dyes were found to exhibit favorable indication properties, their reaction with hypochlorite leading to strong fluorescence enhancement. Real-time assays became possible after integration of these fluorescent probes with designed two-dimensional (2D) and three-dimensional (3D) microfluidic chips, incorporating a passive sinusoidal mixer and a microhydrocyclone, respectively. A comparison of the two microfluidic systems, including their abilities to prevent accumulation or circulation of microbubbles produced by the chemical indication reaction, showed excellent fluidic behavior for the microhydrocyclone-based device. After coupling to a miniaturized optical reader for fluorescence detection, the 2D microfluidic system showed a promising detection range of 0.04-0.5 mg L-1 while still being prone to bubble-induced fluctuations and suffering from considerably low signal gain. The microhydrocyclone-based system was distinctly more robust against gas bubbles, showed a higher signal gain, and allowed us to halve the limit of detection to 0.02 mg L-1. The use of the 3D system to quantify the chlorine content of swimming pool water samples for sensitive and quantitative chlorine monitoring was demonstrated.

Gasoline adulteration is a frequent problem world-wide, because of the chance of quick, maximized profits. However, addition of cheaper ethanol or hydrocarbons like kerosene does not only result in economic damage but also poses problems for vehicles and the environment. To enable law enforcement forces, customers or enterprises to uncover such a fraudulent activity directly upon suspicion and without the need to organize for sampling and laboratory analysis, we developed a simple strip-based chemical test. Key to the favorable performance was the dedicated materials tailoring, which led to test strips that consisted of a cellulose support coated with silica, passivated with hexamethyldisilazane and functionalized covalently with a molecular probe. The probe fluoresces brightly across a broad solvent polarity range, enabling reliable quantitative measurements and data analysis with a conventional smartphone. The assays showed high reproducibility and accuracy, allowing not only for the detection of gasoline adulteration but also for the on-site monitoring of the quality of commercial E10 gasoline.

Quick but accurate testing and on-the-spot monitoring of cocaine in oral fluids and urine continues to be an important toxicological issue. In terms of drug testing, a number of devices have been introduced into the market in recent decades, notably for workplace inspection or roadside testing. However, these systems do not always fulfill the requirements in terms of reliability, especially when low cut-off levels are required. With respect to surface water, the presence of anthropogenic small organic molecules such as prescription and over-the-counter pharmaceuticals as well as illicit drugs like cannabinoids, heroin, or cocaine, has become a challenge for scientists to develop new analytical tools for screening and on-site analysis because many of them serve as markers for anthropogenic input and consumer behavior. Here, a modular approach for the detection of cocaine is presented, integrating an electrochemical enzyme-linked immunosorbent assay (ELISA) performed on antibody-grafted magnetic beads in a hybrid microfluidic sensor utilizing flexible tubing, static chip and screen-printed electrode (SPE) elements for incubation, recognition, and cyclic voltammetry measurements. A linear response of the sensor vs. the logarithm of cocaine concentration was obtained with a limit of detection of 0.15 ng/L. Within an overall assay time of 25 minutes, concentrations down to 1 ng/L could be reliably determined in water, oral fluids, and urine, the system possessing a dynamic working range up to 1 mg/L.

Because of the globally increasing prevalence of diabetes, the need for accurate, efficient and at best miniaturized automated analytical systems for sugar detection in medical diagnostics and the food industry is still urgent. The development of molecular probes for sugars based on boronic acid receptors offers an excellent alternative to the kinetically slow enzyme-based sugar sensors. Moreover, by coupling such chelating units with dye scaffolds like BODIPYs (boron–dipyrromethenes), highly fluorescent sugar sensing schemes can be realized. In this work, a boronic acid-functionalized BODIPY probe was developed, which binds selectively to fructose’s adjacent diols to form cyclic boronate esters. Placement of an amino group in direct neighborhood of the boronic acid moiety allowed us to obtain a broad working range at neutral pH, which distinguishes the probe from the majority of systems working only at pH > 8, while still meeting the desired sensitivity in the micro-molar range due to a pronounced analyte-induced fluorescence increase. To enhance the applicability of the test in the sense described above, integration with a microfluidic chip was achieved. Here, fructose was selectively detected by fluorescence with similar sensitivity in real time on chip, and an assay for the straightforward detection of sugar in (colored) sodas without sample clean-up was established.

Fluorescent sensory MIP (molecularly imprinted polymer) particles were combined with a droplet-based 3D microfluidic system for the selective determination of a prototype small-molecule analyte of environmental concern, 2,4-dichlorophenoxyacetic acid or 2,4-D, at nanomolar concentration directly in water samples. A tailor-made fluorescent indicator cross-linker was thus designed that translates the binding event directly into an enhanced fluorescence signal. The phenoxazinone-type cross-linker was co-polymerized into a thin MIP layer grafted from the surface of silica microparticles following a RAFT (reversible addition-fragmentation chain transfer) polymerization protocol. While the indicator cross-linker outperformed its corresponding monomer twin, establishment of a phase-transfer protocol was essential to guarantee that the hydrogen bond-mediated signalling mechanism between the urea binding site on the indicator cross-linker and the carboxylate group of the analyte was still operative upon real sample analysis. The latter was achieved by integration of the fluorescent core-shell MIP sensor particles into a modular microfluidic platform that allows for an in-line phase-transfer assay, extracting the analyte from aqueous sample droplets into the organic phase that contains the sensor particles. Real-time fluorescence determination of 2,4-D down to 20nM was realized with the system and applied for the analysis of various surface water samples collected from different parts of the world.

The fluorescence properties of three molecular rotors, related to 4-dimethylamino-4-nitrostilbene (4-DNS), are studied versus different diesel/kerosene blends. In nonviscous solvents, these compounds can populate a twisted intramolecular charge transfer state which deactivates nonradiatively, successfully suppressing fluorescence emission. Solution experiments with diesel/kerosene blends showed a good linear correlation between the fluorescence intensity of the probe molecules and the diesel fraction of the blend. The dyes have been immobilized on paper, retaining their fluorescence behavior, i.e., negligible emission in the presence of nonviscous organic solvents and increasing fluorescence when the environment is increasingly viscous. When the impregnated paper is devised as a test strip, the latter is compatible with a newly designed smartphone reader system, which allows in-the-field measurements. The method can safely detect the presence of kerosene in diesel at ≥7%, which competes favorably with cur...

This paper describes the development of a semiautomatic gas measurement device presenting potentially a broad range of applications, noteworthy in the agricultural sector. Nonreversible fluorescent molecular sensors were designed and synthesized. Upon, integration into a hydrogel matrix with an optimal ratio of co-solvents, the sensors reacting selectively to ammonia were illuminated by excitation light to produce a concentration-correlated fluorescence emission. An automated mechanical-electrical device initiates a given gas mixture and thus simulates concentrations similar to a threshold value. The aim of this project is to develop a sensor or a low-cost method which can monitor low concentrations of harmful gases and aid in their elimination or regulation in livestock housing, barns or stables.

Chlorination procedures are commonly applied in swimming pool water and wastewater treatment, yet also in food, pharmaceutical, and paper production. The amount of chlorine in water needs to be strictly controlled to ensure efficient killing of pathogens but avoid the induction of negative health effects. Miniaturized microfluidic fluorescence sensors are an appealing approach here when aiming at online or at-site measurements. Two

In this article, we report on the specific detection of cadmium ions in water using an optofluidic sensor based on a polymeric microresonator functionalized with a cadmium ion specific ligand. A limit of detection down to (0.31 ± 0.07) nM ((33.9 ± 7.8) ng/L) in deionized water and (0.36 ± 0.10) nM ((38.9 ± 10.6) ng/L) in tap water was achieved. When applying a post-measurement digital treatment onto measured signals using a median filter, the sensor limit of detection was reduced to (0.13 ± 0.03) nM ((14.8 ± 0.07) ng/L) in deionized water and to (0.17 ± 0.04) nM ((18.3 ± 4.4) ng/L) in tap water. The chemical sensor could be adapted to build a portable instrument for in situ analysis.

A droplet-based microfluidic sensor was developed for the detection of Hg2+ traces in water. The approach uses gated mesoporous nanoparticles loaded with a fluorescent BODIPY dye. The squaraine-based gating mechanism is highly selective for Hg2+ and the indicator release mechanism ensures sensitive detection. The microfluidic system is modular and was assembled from simple PTFE/PFA tubes, while detection was realized with standard optomechanic, optic, and electronic parts. The sensor shows a stable response without memory effects and allows the detection of Hg2+ in water down to 20 ppt.

This paper describes a wireless mobile prototype able to perform optical measurements by means of a miniaturized spectrometer for low light analysis, e.g. fluorescent sensors. Evaluations, calculations, calibration management and result display are performed by a computer or a standard tablet. The device was designed primarily to detect traces of oil in drinking or ground water and for the analyses of crude oils. However, it can also address a wide range of fluorescent sensors. The fast and user-friendly inspection of water quality or oil properties, as well as the adaptability and mobility, make the device attractive for a variety of users. Further application areas could be easily implemented by adapting the optics and the software (database, data processing and calibration plots, etc.)

The synthesis and photophysical properties of a novel fluorescent sensor are described. The phosphorus-selenium moiety allowed a selective mercury salt complexation, followed by the formation of phosphane oxide, which leads to a turn-on of the fluorescence. The sensibility and selectivity toward mercury cations were evaluated (0.18 ppb) and found to be in complete adequation with the targeted level of the World Health Organization, which makes the dye an efficient dosimeter for mercury cations.

A novel synthetic strategy toward highly fluorinated BODIPY dyes with exceptional photostabilities relying on sustainable gold catalysis has been developed. A key to the tailored pyrrole precursors is the gold catalysis performed in ionic liquids as the reaction medium, allowing a facile recycling of the catalysts. The dyes prepared are well-matching with the spectral windows of popular rhodamine dyes and possess high brightness while showing a distinctly higher photostability than the rhodamines especially in aprotic solvents.

A novel synthetic strategy toward highly fluorinated BODIPY dyes with exceptional photostabilities relying on sustainable gold catalysis has been developed. A key to the tailored pyrrole precursors is the gold catalysis performed in ionic liquids as the reaction medium, allowing a facile recycling of the catalysts. The dyes prepared are well-matching with the spectral windows of popular rhodamine dyes and possess high brightness while showing a distinctly higher photostability than the rhodamines especially in aprotic solvents.

International audience; Novel analogues of 8-hydroxyquinoline with phosphinate or thiophosphinate functions and styryl fluorophores in the para position to the nitrogen atom were prepared via multi-step syntheses, using phosphorylation and Wittig coupling reactions. A strong affinity between the quinoline analogues and heavy metal ions such as Pb2+, Cd2+ and Hg2+ was highlighted. The interaction of the metal ions with the nitrogen of the styrylquinoline leads to a large red shift of the absorption and emission spectra in agreement with an increase of the photoinduced charge transfer character of the styryl fluorophore. In the presence of metal ions the appearance of a green fluorescence emission is also observed upon excitation at 420 nm or 840 nm, thanks to a significant increase of the two-photon response. Under optimal conditions, a mercury concentration of 15 ppt in a partially aqueous medium can be detected using the thiophosphinate derivative without interference from other metal ions.

A series of fluorescent sensor molecules based on a phosphane sulfide derivative that is soluble in an organoaqueous solvent were designed and synthesized. The structure of the fluorophore has been optimized in order to have the best compromise in terms of solubility and photophysical properties. The obtained properties are in full agreement with quantum chemical calculations. A fluorescent molecular sensor containing one polyoxoethylene group has been synthesized and an efficient quenching upon mercury complexation has been observed. Finally, this sensing molecule has been introduced in a microfluidic chip in which fluorescence detection has been integrated. An efficient fluorescence response was observed upon mercury addition.

International audience; A series of rod-shaped and related three-branched push-pull derivatives containing phosphane oxide or phosphane sulfide (PO or PS)a-as an electron-withdrawing group conjugated to electron-donating groups, such as amino or ether groups, with a conjugated rod consisting of arylene-vinylene or arylene-ethynylene building blocksa-were prepared. These compounds were efficiently synthesized by a Grignard reaction followed by Sonogashira coupling. Their photophysical properties including absorption, emission, time-resolved fluorescence, and two-photon absorption (TPA) were investigated with special attention to structure-property relationships. These fluorophores show high fluorescence quantum yields and solvent-dependent experiments reveal that efficient intramolecular charge transfer occurs upon excitation, thereby leading to highly polar excited states, the polarity of which can be significantly enhanced by playing on the end groups and conjugated linker. Rod-shaped and related three-branched systems show similar fluorescence properties in agreement with excitation localization on one of the push-pull branches. By using stronger electron donors or replacing the arylene-ethynylene linkers with an arylene-vinylene one induces significant redshifts of both the low-energy one-photon absorption and TPA bands. Interestingly, a major enhancement in TPA responses is observed, whereas OPA intensities are only weakly affected. Similarly, phosphane oxide derivatives show similar OPA responses than the corresponding sulfides but their TPA responses are significantly larger. Finally, the electronic coupling between dipolar branches promoted by common PO or PS acceptor moieties induces either slight enhancement of the TPA responses or broadening of the TPA band in the near infrared (NIR) region. Such behavior markedly contrasts with triphenylamine-core-mediated coupling, which gives evidence for the different types of interactions between branches. © 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim.