Search

We present the first results of K2-OjOS, a collaborative project between professional and amateur astronomers primarily aimed to detect, characterize, and validate new extrasolar planets. For this work, 10 amateur astronomers looked for planetary signals by visually inspecting the 20 427 light curves of K2 campaign 18 (C18). They found 42 planet candidates, of which 18 are new detections and 24 had been detected in the overlapping C5 by previous works. We used archival photometric and spectroscopic observations, as well as new high-spatial resolution images in order to carry out a complete analysis of the candidates found, including a homogeneous characterization of the host stars, transit modelling, search for transit timing variations and statistical validation. As a result, we report four new planets (K2-355 b, K2-356 b, K2-357 b, and K2-358 b) and 14 planet candidates. Besides, we refine the transit ephemeris of the previously published planets and candidates by modelling C5, C16 (when available) and C18 photometric data jointly, largely improving the period and mid-transit time precision. Regarding individual systems, we highlight the new planet K2-356 b and candidate EPIC 211537087.02 being near a 2:1 period commensurability, the detection of significant TTVs in the bright star K2-184 (V = 10.35), the location of K2-103 b inside the habitable zone according to optimistic models, the detection of a new single transit in the known system K2-274, and the disposition reassignment of K2-120 b, which we consider as a planet candidate as the origin of the signal cannot be ascertained. [ABSTRACT FROM AUTHOR]

Using density-functional theory calculations, we determined the pressure domain of stability of beryllium metasilicate, BeSiO 3 , an elusive compound for which no stable polymorph is known until now. We found that BeSiO 3 is stable at pressures above 9 GPa, a condition that makes it accessible with a large-volume press. After considering the cubic, orthorhombic, and hexagonal perovskite structures and the Ilmenite structure, known from related compounds, we propose that the most stable structure among them is the orthorhombic perovskite structure described by space group Pnma . The unit-cell parameters of this structure are a = 4.966 Å, b = 7.160 Å, and c = 4.374 Å. We also determined the frequencies of Raman and infrared phonons, the elastic constants and modulus, and the electronic band structure for the orthorhombic perovskite structure. Finally, the pressure dependence of unit-cell parameters was calculated. Compression was found to be slightly anisotropic, with the axial compressibilities decreasing following the sequence κ b > κ c > κ a . In addition, we found that BeSiO 3 is quite incompressible with a bulk modulus of 242 GPa, which makes it one of the less compressible silicates. To understand, such a large bulk modulus, both the quantum theory of atoms in molecules and the electron localization function decomposition were utilized to analyze the bonding and to relate it to the mechanical properties.

Subvalent compounds raise the question of where those valence electrons not belonging to chemical bonds are. In the limiting case of Ag 7 Pt 2 O 7 , there is just one-electron excess in the chemical formula requiring the presence of Ag atoms with oxidation states below +1, assuming conventional Pt 4+ and O 2- ions. Such a situation challenges the understanding of the semiconducting and diamagnetic behavior observed in this oxide. Previous explanations that localize pairwise the electron excess in tetrahedral Ag 4 interstices do not suffice in this case, since there are six silver tetrahedral voids and only an excess of nine electrons in the unit cell. Here, we provide an alternative explanation for the subvalent nature of this compound by combining interatomic distances, electron density-based descriptors, and orbital energetic analysis criteria. As a result, Ag atoms that do not participate in their valence electron are revealed. We identify excess electrons located in isolated subvalent silver clusters with electron-deficient multicenter bonds resembling pieces of metallic bonding in fcc-Ag and Ag 7 Pt 2 alloy. Our analysis of the electronic band structure also supports the multicenter bonding picture. This combined approach from the real and reciprocal spaces reconciles existing discrepancies and is key to understanding the new chemistry of silver subvalent compounds.

In the search for new active pharmaceutical ingredients, the precise control of the chemistry of cocrystals becomes essential. One crucial step within this chemistry is proton migration between cocrystal coformers to form a salt, usually anticipated by the empirical ΔpK a rule. Due to the effective role it plays in modifying intermolecular distances and interactions, pressure adds a new dimension to the ΔpK a rule. Still, this variable has been scarcely applied to induce proton-transfer reactions within these systems. In our study, high-pressure X-ray diffraction and Raman spectroscopy experiments, supported by DFT calculations, reveal modifications to the protonation states of the 4,4'-bipyridine (BIPY) and malonic acid (MA) cocrystal (BIPYMA) that allow the conversion of the cocrystal phase into ionic salt polymorphs. On compression, neutral BIPYMA and monoprotonated (BIPYH + MA - ) species coexist up to 3.1 GPa, where a phase transition to a structure of P2 1 /c symmetry occurs, induced by a double proton-transfer reaction forming BIPYH 2 2+ MA 2- . The low-pressure C2/c phase is recovered at 2.4 GPa on decompression, leading to a 0.7 GPa hysteresis pressure range. This is one of a few studies on proton transfer in multicomponent crystals that shows how susceptible the interconversion between differently charged species is to even slight pressure changes, and how the proton transfer can be a triggering factor leading to changes in the crystal symmetry. These new data, coupled with information from previous reports on proton-transfer reactions between coformers, extend the applicability of the ΔpK a rule incorporating the pressure required to induce salt formation., (open access.)

Covalent crystals such as diamonds are a class of fascinating materials that are challenging to fabricate in the form of thin films. This is because spatial kinetic control of bond formation is required to create covalently bonded crystal films. Directional crystal growth is commonly achieved by chemical vapor deposition, an approach that is hampered by technical complexity and associated high cost. Here we report on a liquid-liquid interfacial approach based on physical-organic considerations to synthesize an ultrathin covalent crystal film. By distributing reactants into separate phases using hydrophobicity, the chemical reaction is confined to an interface that orients the crystal growth. A molecular-smooth interface combined with in-plane isotropic conditions enables the synthesis of films on a centimeter size scale with a uniform thickness of 13 nm. The film exhibits considerable mechanical robustness enabling a free-standing length of 37 µm, as well as a clearly anisotropic chemical structure and crystal lattice alignment., (© 2023. The Author(s).)

The direct chemical reactivity between phosphorus and nitrogen was induced under high-pressure and high-temperature conditions (9.1 GPa and 2000-2500 K), generated by a laser-heated diamond anvil cell and studied by synchrotron X-ray diffraction, Raman spectroscopy, and DFT calculations. α-P 3 N 5 and γ-P 3 N 5 were identified as reaction products. The structural parameters and vibrational frequencies of γ-P 3 N 5 were characterized as a function of pressure during room-temperature compression and decompression to ambient conditions, determining the equation of state of the material up to 32.6 GPa and providing insight about the lattice dynamics of the unit cell during compression, which essentially proceeds through the rotation of the PN 5 square pyramids and the distortion of the PN 4 tetrahedra. Although the identification of α-P 3 N 5 demonstrates for the first time the direct synthesis of this compound from the elements, its detection in the outer regions of the laser-heated area suggests α-P 3 N 5 as an intermediate step in the progressive nitridation of phosphorus toward the formation of γ-P 3 N 5 with increasing coordination number of P by N from 4 to 5. No evidence of a higher-pressure phase transition was observed, excluding the existence of predicted structures containing octahedrally hexacoordinated P atoms in the investigated pressure range.

Using Lifshitz theory, we assess the role of van der Waals forces at interfaces of ice and water. The results are combined with measured structural forces from computer simulations to develop a quantitative model of the surface free energy of premelting films. This input is employed within the framework of wetting theory and allows us to predict qualitatively the behavior of quasi-liquid layer thickness as a function of ambient conditions. Our results emphasize the significance of vapor pressure. The ice-vapor interface is shown to exhibit only incomplete premelting, but the situation can shift to a state of complete surface melting above water saturation. The results obtained serve also to assess the role of subsurface freezing at the water-vapor interface, and we show that intermolecular forces favor subsurface ice nucleation only in conditions of water undersaturation. We show that ice regelation at ambient pressure may be explained as a process of capillary freezing, without the need to invoke the action of bulk pressure melting. Our results for van der Waals forces are exploited in order to gauge dispersion interactions in empirical point charge models of water.

Here an all-carbon linked 3D covalent organic framework (COF) is introduced by employing a templated surface reaction in a continuous flow (TSRCF). The presented method of synthesis provides spatial control over the reaction chemistry and allows for the creation of ultrasmooth COF films of desired thickness and significant crystallinity. The films show high electrical conductivity (≈3.4 S m -1 ) after being doped with tetracyanoquinodimethane (TCNQ), setting a new record for 3D COF materials. The concurrence of 3D nanosized channels and high conductivity opens up for a number of hitherto unexplored applications for this class of materials, such as high surface area electrodes, electrochemical transistors, and for electronic sensing., (© 2021 The Authors. Small published by Wiley-VCH GmbH.)

This paper analyzes the structural, energetic and mechanical properties of carbon dioxide hydrate clathrates calculated using finite cluster and periodic ab initio density-functional theory methodologies. Intermolecular interactions are described by the exchange-hole dipole moment method. The stability, gas saturation energetics, guest-host interactions, cage deformations, vibrational frequencies, and equation of state parameters for the low-pressure sI cubic phase of the CO₂@H₂O clathrate hydrate are presented. Our results reveal that: (i) the gas saturation process energetically favors complete filling; (ii) carbon dioxide molecules prefer to occupy the larger of the two cages in the sI structure; (iii) blue shifts occur in both the symmetric and antisymmetric stretching frequencies of CO₂ upon encapsulation; and (iv) free rotation of guest molecules is restricted to a plane parallel to the hexagonal faces of the large cages. In addition, we calculate the librational frequency of the hindered rotation of the guest molecule in the plane perpendicular to the hexagonal faces. Our calculated spectroscopic data can be used as signatures for the detection of clathrate hydrates in planetary environments.