Search

Abstract The purpose was to evaluate the use of 3D CT-DCG-assisted and endoscopically guided coronary catheter balloon dacryoplasty (CC-BDCP) in adults with focal stenosis of the nasolacrimal duct (NLD) and report their long-term outcomes. A prospective, non-randomized, single-center clinical study was performed, and the patients underwent endoscopy-guided CC-BDCP using percutaneous transluminal coronary angioplasty (PTCA) balloon catheters. 25 patients were enrolled in the study. The CC-BDCP procedure was performed in 21 of 25 (84%) patients, and the remaining 4 (16%) patients had significant procedural difficulties due to unfavorable anatomical conditions. Of the 21 patients, 10 (47.6%) were procedurally assessed as “easy” (eCC-BDCP) and in 11 (52.4%) as procedurally “difficult” (dCC-BDCP). Values on Munk's epiphora intensity scale changed overall from 4.0 preoperatively to 1.4 ± 1.6 (p = 0.00001) postoperatively overall. FDDT changed overall from 2.9 ± 0.3 to 1.1 ± 1.2 after treatment (p = 0.00008) (from 2.8 ± 0.4 to 0.3 ± 0.6 in the eCC-BDCP group and from 2.9 ± 0.3 to 1.4 ± 1.2 in the dCC-BDCP group (p = 0.01352). The anatomical and functional success rate was 77% overall, 90% in the eCC-BDCP group, and 64% in the dCC-BDCP group. The CC-BDCP led to a statistically significant decrease in epiphora in a particular group of adult patients with demonstrable focal stenosis of the NLD.

Abstract There are no standards in diagnostic and therapeutic approaches to eye care in incomplete eyelid closure due to unresolved facial palsy (FP). Loading of the upper eyelid (UELL) with gold weights (GWs) or platinum chains (PCs) is a highly effective procedure for the correction of lagophthalmos. Despite this, the procedure is used infrequently in our country because of the relatively high price of the implant and the lack of reimbursement. The aim of this research was to assess the factors influencing medical expenditures in this group of patients and to analyze utility costs for the UELL procedure with the use of GW and PC compared to tarsorrhaphy. Material and methods The costs of 88 surgical procedures (40 GWs, 11 PCs and 37 tarsorrhaphies) and medical expenditures before and after surgery were calculated based on reporting of materials, staff salaries and the SF-36 questionnaire. Distribution quartiles of the cost per QALY measure (dependent variable) was assessed via an ordered logistic regression model with eight explanatory variables. Results The calculated total cost of the surgery was US$209 for tarsorrhaphy, US$758 for UELL with a GW and US$1,676 for UELL with a PC. Bootstrapped costs per QALY values (CUI) in 88% of cases were below the US$100,000 cutoff. Etiology and duration of facial palsy and presence of Bell’s phenomenon were factors that significantly influenced the CUI. Patient gender and age, history of previous eyelid surgery, and presence of corneal sensation were found to be not significant (p > 0.1). Calculated ICER for GW was US$1,241.74/1QALY and ICER for PC was US$13,181.05/1QALY compared to tarsorrhaphy. Conclusions Eye protection in patients with FP should be a crucial element of health policy. Findings suggest UELL procedure with a GW or a PC to be a cost-effective procedure with GW being the most cost-effective.

The aim of the work is to examine the possibilities of developing geotourism in the context of existing, but not yet recognised, geoheritage in the north-eastern Wielkopolska, western Poland. Pałuki is characterised by exceptional geodiversity, which has enormous potential for diversifying the present tourist offer. The valorisation method of selected 12 geosites was used, taking into account geomorphological, additional and utility categories. The results of the analytical part made it possible to identify the most valuable and geotouristically attractive geosites. They form two original geotourism trails under the common name of "Geodiversified Pałuki". In order to increase the possibilities of developing local geotourism, two proposals for thematic geotourism trail focusing on the most interesting, and highly rated, geosites in the research area are presented.

Abstract A posterior approach is recommended for the correction of mild to moderate upper eyelid ptosis in adults. The aim of this study is to propose a new algorithm that helps to predict outcomes in the transconjunctival correction of moderate to severe blepharoptosis. This study included adult patients with moderate to severe upper eyelid ptosis treated between 2019 and 2021. Patients meeting inclusion criteria underwent ptosis correction through a posterior approach using an algorithm: 4 mm Mueller’s muscle transconjunctival resection to correct 1 mm ptosis (depending on a test with 10% phenylephrine: 3–12 mm) ± tarsal plate resection: 1 mm for every 1 mm of residual ptosis after phenylephrine test, but leaving a minimum of 4 mm upper tarsus intact. Outcomes were ovserved within at least 6-months. Outcomes were assessed based on pre- and postoperative MRD1 changes, inter-eyelid height symmetry, cosmetic effect, and complications. Outcomes of 118 procedures in 81 patients (average age 69, range: 47–87) were analyzed. MRD1 changes were statistically significant, from 0.2 ± 1.6 mm before to 4.1 ± 1 mm after surgery. The function of the levator palpebrae superioris muscle was 10.2 ± 3.4 (range 5–17) mm. Upper eyelid lifted by an average of 1.8 ± 0.7 (range 0–3) mm after the instillation of 10% phenylephrine eyedrops. An average of 8.5 ± 0.8 (range 8–10) mm of conjunctiva and Mueller’s muscle and 2.2 ± 0.9 (range 1–5) mm of the tarsal plate were resected during the procedure. Inter-eyelid height symmetry within 1 mm was achieved in 95% of outcomes. The algorithm introduced in this study appears to be useful to achieve repeatable satisfactory outcomes in the transconjunctival correction of moderate to severe upper eyelid ptosis in adults with at least ”fair” levator function.

The use of Solidago virgaurea extract as a raw material for cosmetics production fits the eco-tendency prevalent in the cosmetic industry for many years now perfectly. The study reported in this paper included an evaluation of the potential of the above-mentioned plant extract as a natural cosmetic ingredient applied in the form of cosmetic macroemulsions. The physicochemical parameters (pH, viscosity, particle size distribution) and physical stability (multiple light scattering) of the cosmetic formulations containing Solidago virgaurea (1.0 wt.%) were studied. An in vivo study was carried out on a group of 20 female volunteers. The results showed a high compatibility of the tested extract with the other components in the macroemulsion in the form of a serum for the body, which was the formulation containing Sorbitan Stearate as an emulsifier. Analysis of the results revealed a relation between the compatibility of the investigated herbal extract with the components of the cosmetic base and the effectiveness of this extract as an active substance. As a result of an improvement in the application parameters, an over 70% increase in the level of epidermis moisturization was observed along with other beneficial changes in the parameters of skin macrorelief and topography.

The use of lipid nanocarriers as components of cosmetic formulations may provide an opportunity to fully exploit the beneficial properties of pentapeptide-18 and retinol while reducing the undesirable effects that occur during retinoid therapy. This study aimed to evaluate the effectiveness of semi-solid formulations enriched with retinol and oligopeptide-loaded lipid nanocarriers. Solid lipid nanoparticles were produced using a high-shear homogenization method. The work included physicochemical characterization of the cosmetic products, and evaluation of their stability as well as their efficacy. The resulting semi-solid preparations were determined to be stable regardless of their storage temperature. No effect of the presence of lipid nanoparticles on the shelf-life stability of the cosmetic products was observed. A temperature of 25 °C was considered the recommended storage temperature for the tested semi-solid formulations. Beneficial effects of the cosmetic products were proven (in vivo study on volunteers), i.e., a significant reduction in the level of sebum secretion (anti-acne therapy) and a decrease in the number of facial wrinkles (anti-aging therapy). In addition, the protective properties of the lipid nanoparticles themselves against the skin were confirmed, reducing the irritating effect of retinol that is usually the case with classic retinoid therapies.

Abstract In the present paper, for the first time the ability of the porous biosilica originated from three marine diatom strains of ‘Nanofrustulum spp.’ viz. N. wachnickianum (SZCZCH193), N. shiloi (SZCZM1342), N. cf. shiloi (SZCZP1809), to eliminate MB from aqueous solutions was investigated. The highest biomass was achieved under silicate enrichment for N. wachnickianum and N. shiloi (0.98 g L−1 DW and 0.93 g L−1 DW respectively), and under 15 °C for N. cf. shiloi (2.2 g L−1 DW). The siliceous skeletons of the strains were purified with hydrogen peroxide and characterized by SEM, EDS, the N2 adsorption/desorption, XRD, TGA, and ATR-FTIR. The porous biosilica (20 mg DW) obtained from the strains i.e. SZCZCH193, SZCZM1342, SZCZP1809, showed efficiency in 77.6%, 96.8%, and 98.1% of 14 mg L−1 MB removal under pH 7 for 180 min, and the maximum adsorption capacity was calculated as 8.39, 19.02, and 15.17 mg g−1, respectively. Additionally, it was possible to increase the MB removal efficiency in alkaline (pH = 11) conditions up to 99.08% for SZCZP1809 after 120 min. Modelling revealed that the adsorption of MB follows Pseudo-first order, Bangham’s pore diffusion and Sips isotherm models.

Embryo implantation is a key moment in pregnancy. Abnormal production of pro- and anti-inflammatory cytokines, their receptors and other immune factors may result in embryo implantation failure and pregnancy loss. The aim of this study was to determine the profile of selected pro- and anti-inflammatory factors in the blood plasma of patients undergoing in vitro fertilization (IVF) and control women who achieved pregnancy after natural conception. The examined patients were administered steroid prednisone. We present results concern the plasma levels of IFN-ɣ, BDNF, LIF, VEGF-A, sTNFR1 and IL-10. We found that IVF patients receiving steroids differed significantly from patients who were not administered such treatment in terms of IFN-γ and IL-10 levels. Moreover, IVF patients differed in secretion of all tested factors with the fertile controls. Our results indicated that women who secrete at least 1409 pg/ml of sTNFR1 have a chance to become pregnant naturally and give birth to a child, while patients after IVF must achieve a concentration of 962.3 pg/ml sTNFR1 in blood plasma for successful pregnancy. In addition, IVF patients secreting VEGF-A above 43.28 pg/ml have a greater risk of miscarriage or a failed transfer in comparison to women secreting below this value. In conclusion, fertile women present a different profile of pro- and anti-inflammatory cytokines, and growth factors compared to patients with recurrent implantation failure (RIF).

One of the important ways to promote geoheritage values is to use geosites in school education. Particularly useful for this are nature reserves that include interesting geological and geomorphological sites. The area of Świętokrzyskie Province is one of the most interesting geological regions of Poland. In 2021, the Holy Cross Mountains UNESCO Global Geopark was established. The main objective of this study was to determine the school students’ knowledge of geoheritage sites and their use in geotourism and education. The province’s nature reserves are well accessible by transportation from school. Diverse geoheritage sites were selected for the assessment of their geotourism values. An assessment of their geotourism values was made. The problem of knowledge and perception of geoheritage was studied using a questionnaire survey among students of high schools located in the city of Starachowice. The results showed that despite the presence of sites of high value, unique in the country and Europe, they are rarely visited by students and even less frequently used in formal education (field classes). On the other hand, students declare that geoheritage assets can be treated as important tourism attractions. Researchers in the field of geoeducation and geotourism should place greater emphasis on disseminating this knowledge among teachers and the public. An opportunity for the development of geoeducation will certainly be the establishment of a geopark.

Abstract Loading of the upper eyelid is a well-established procedure for the correction of incomplete eyelid closure due to unresolved facial palsy. Some incurable complications are attributed to type IV hypersensivity reaction, but there is no confirmation of this hypothesis. The aim of the study was to show the impact of gold weights on eyelid tissues depending on the implantation site. Out of 94 total patients (aged 53 ± 17 years) treated from July 2009–2021, since 2014 thirty consecutive patients were randomised into one of 3 groups: the GLE group (gold weight fixed 2 mm above the eyelash line), the GUE group (gold weight fixed at the border of the tarsus and the levator aponeurosis), and the PUE group (platinum chain fixed in the same way as in the GUE group). In the cases of complications, the explanted weights were evaluated histopathologically. The outcomes were compared between groups. Incomplete eyelid closure was corrected in all patients. Serious complications were noted in 100% of patients in the GLE group and 20% in the GUE group (p

Calendula officinalis L. promotes wound healing and might be effective in gingival fibroblast stimulation. The influence of different concentrations of Calendula officinalis L. ethanol extract on human gingival fibroblast was visualized using PANsys 3000—a fully automated cell culture device used for in vitro culture to study cells under conditions similar to in vivo. The human fibroblast cells were isolated from gingival tissue. The 100% brew of Calendula officinalis L., as well as 7% and 20% Calendula officinalis L. ethanol extract, were added to the cultured cells and observed for 72 h. The qualitative and quantitative composition of the volatile compounds of marigold Calendula officinalis L. flowers are presented in this study. The essential oil compounds of the decoction were isolated with solid-phase microextraction (SPME) and analyzed with gas chromatography coupled with tandem mass spectrometry (GC-MS/MS). The presence of terpenoids, flavonoids, and other compounds was demonstrated. The composition was correlated with the fragrance properties. Observation of gingival fibroblast showed that there were no changes in cell morphology and proliferation after 100% Calendula officinalis L. brew stimulation. The growth and cell division were not inhibited. Likewise, the addition of 7% or 20% ethanol in water extract of Calendula officinalis L. stimulation did not inhibit the fibroblast proliferation. Overall, ethanol extracts of Calendula officinalis L. decrease the alcohol cytotoxic influence on gingival fibroblasts.

The HLA-G molecule is widely accepted as an important factor for pregnancy success. Its expression has been detected in the extravillous trophoblasts. Soluble HLA-G (sHLA-G) was found in the genital tract, pre-implanted embryos as well as in seminal fluid. In this study, we investigated the concentration of sHLA-G (sHLA-G1 and sHLA-G5) in media from 344 single cultured embryos following in vitro fertilization/intracytoplasmic sperm injection (IVF/ICSI). The level of sHLA-G (U/ml) was tested with a sandwich enzyme-linked immunosorbent assay (ELISA) kit. We correlated sHLA-G secretion with ovarian stimulation protocols, the type of embryo transfer (fresh or frozen cycle) and the quality of the embryos. The ovarian stimulation protocol affects the secretion of sHLA-G by the embryo. Embryos obtained from the long agonist protocol secreted more sHLA-G than those originating from the short antagonist protocol (p = 0.0001). Embryos whose transfer resulted in a clinical pregnancy and/or live birth secreted more sHLA-G compared to those whose transfer ended without pregnancy. This was particularly observable in embryos following the long ovarian stimulation protocol and from a frozen embryo cycle. In conclusion, sHLA-G secreted by the embryo has an impact on implantation and live birth and could be a developmental potential marker of the embryo. Its concentration depends on the ovarian stimulation protocol used.

The role of nanotechnology is increasingly important in our society. Through it, scientists are acquiring the ability to understand the structure and properties of materials and manipulate them at the scale of atoms and molecules. Nanomaterials are at the forefront of the rapidly growing field of nanotechnology. The synthesis of nanostructured materials, especially metallic nanoparticles, has attracted tremendous interest over the past decade due to their unique properties, making these materials excellent and indispensable in many areas of human activity. These special properties can be attributed to the small size and large specific surface area of nanoparticles, which are very different from those of bulk materials. Nanoparticles of different sizes and shapes are needed for many applications, so a variety of protocols are required to produce monodisperse nanoparticles with controlled morphology. The purpose of this review is firstly to introduce the reader to the basic aspects related to the field of nanotechnology and, secondly, to discuss metallic nanoparticles in greater detail. This article explains the basic concepts of nanotechnology, introduces methods for synthesizing nanoparticles, and describes their types, properties, and possible applications. Of many methods proposed for the synthesis of metal nanoparticles, a chemical reduction is usually preferred because it is easy to perform, cost-effective, efficient, and also allows control of the structural parameters through optimization of the synthesis conditions. Therefore, a chemical reduction method is discussed in more detail—each factor needed for the synthesis of nanoparticles by chemical reduction is described in detail, i.e., metal precursors, solvents, reducing agents, and stabilizers. The methods that are used to characterize nanomaterials are described. Finally, based on the available literature collection, it is shown how changing the synthesis parameters/methods affects the final characteristics of nanoparticles.

According to recent trends, people are more interested in cosmetic products based on natural raw materials, known to be safe for humans, including extracts obtained from selected plants, rich in active ingredients, such as proteins, vitamins, micro- and macro-elements, phospholipids, antioxidants, and natural preservatives. An example of such raw materials is Tremella fuciformis extract, which is a natural alternative to hyaluronic acid. It retains water deep in the skin cells and stimulates the skin to fight free radicals, which are responsible for the premature aging of the skin. The aim of this study was to optimize the composition of cosmetic formulations based on natural substitutes for the synthetic substances, as well as their characterization, which included the determination of the physicochemical and skin care properties. Formulations containing Tremella fuciformis extract had the effect of reducing TEWL by 12.4%, compared to a formulation that did not contain this active ingredient, and allowed adequate hydration of the epidermis, which was confirmed by apparatus methods. Additionally, dermatological tests were also conducted for the formulations obtained, which showed that no erythema or swelling/irritation was observed in any of the test volunteers 48 and 72 h after the application of the product.

Industrial wastes with hazardous dyes serve as a major source of water pollution, which is considered to have an enormous impact on public health. In this study, an eco-friendly adsorbent, the porous siliceous frustules extracted from the diatom species Halamphora cf. salinicola, grown under laboratory conditions, has been identified. The porous architecture and negative surface charge under a pH of 7, provided by the various functional groups via Si–O, N–H, and O–H on these surfaces, revealed by SEM, the N2 adsorption/desorption isotherm, Zeta-potential measurement, and ATR-FTIR, respectively, made the frustules an efficient mean of removal of the diazo and basic dyes from the aqueous solutions, 74.9%, 94.02%, and 99.81% against Congo Red (CR), Crystal Violet (CV), and Malachite Green (MG), respectively. The maximum adsorption capacities were calculated from isotherms, as follows: 13.04 mg g−1, 41.97 mg g−1, and 33.19 mg g−1 against CR, CV, and MG, respectively. Kinetic and isotherm models showed a higher correlation to Pore diffusion and Sips models for CR, and Pseudo-Second Order and Freundlich models for CV and MG. Therefore, the cleaned frustules of the thermal spring-originated diatom strain Halamphora cf. salinicola could be used as a novel adsorbent of a biological origin against anionic and basic dyes.

Successful reproduction depends on many factors. Male factors contribute to infertility in approximately 50% of couples who fail to conceive. Seminal plasma consists of secretions from different accessory glands containing a mixture of various cytokines, chemokines, and growth factors, which together can induce a local immune response that might impact on a male’s as well as a female’s fertility. Human leukocyte antigen (HLA)-G expression has been suggested as an immunomodulatory molecule that influences pregnancy outcome. The HLA-G gene encodes either membrane-bound or/and soluble proteins. The aim of this study was the evaluation of HLA-G polymorphisms and their impact on soluble HLA-G (sHLA-G) production. We tested the HLA-G polymorphism in three positions: rs1632947: c.-964G>A; rs1233334: c.-725G>C/T in the promoter region; rs371194629: c.∗65_∗66insATTTGTTCATGCCT in the 3′ untranslated region. We tested two cohorts of men: 663 who participated in in vitro fertilization (test material was blood or sperm), and 320 fertile controls who possessed children born after natural conception (test material was blood). Since 50% of men visiting assisted reproductive clinics have abnormal semen parameters, we wondered if men with normal sperm parameters differ from those with abnormal parameters in terms of HLA-G polymorphism and secretion of sHLA-G into semen. We found that certain rs1632947-rs1233334-rs371194629 HLA-G haplotypes and diplotypes were associated with male infertility, while others were protective. Normozoospermic men with the A-C-del haplotype and A-C-del/A-C-del diplotype secreted the most sHLA-G into semen (574.1 IU/mL and 1047.0 IU/mL, respectively), while those with the G-C-ins haplotype and G-C-ins/G-C-ins diplotype – the least (80.8 IU/mL and 75.7 IU/mL, respectively). Men with the remaining haplotypes/diplotypes secreted sHLA-G at an intermediate level. However, only in one haplotype, namely G-C-ins, did we observe strong significant differences in the concentration of sHLA-G in the semen of men with teratozoospermia compared to men with normal sperm parameters (p = 0.009). In conclusion, fertile men differ in the profile of HLA-G polymorphism from men participating in IVF. Among all HLA-G haplotypes, the most unfavorable for male fertility is the G-C-ins haplotype, which determines the secretion of the lowest concentration of the soluble HLA-G molecule. This haplotype may reduce sperm parameters.

The aim of this study was to develop a topically applied formulation with the potential to alleviate arthritis ailments. A combination of two active ingredients, icariin from Epimedium L. (Species: Epimedium Koreanum) extract as a potential promoter of chondrogenesis and glucosamine sulfate as a precursor of cartilage tissues, was tested. In permeation studies, the potential for skin permeation of both substances was confirmed; however, the in vitro release test did not accurately reflect the degree of skin permeation. The in vitro release of icariin was at a level of 15.0–19.0% for the plant-extract-derived icariin and 29.0–35.0% for the pure substance. The level of glucosamine sulfate release was 38.4% (on average). For icariin of both origins, the release results were higher than those obtained via oral administration (about 12.0%), which shows the potential superiority of topical application. In addition, the physicochemical parameters that affect the in vitro release and performance of topical formulations were addressed. This preliminary research and permeation analysis of the formulation produced a promising picture of its prospects regarding arthritis treatment, although further investigation is needed.

Hierarchical zeolites are aluminosilicates with a crystal structure, which next to the micropores possess secondary porosity in the range of mesopores and/or small macropores. Due to their ordered structure and additional secondary porosity, they have aroused great interest among scientists in recent years. Therefore, the present work concerns the synthesis and characterization of hierarchical zeolites with secondary mesoporosity, based on commercial zeolites such as MFI (ZSM-5), BEA (β) and FAU (Y), and modified with polysaccharides such as inulin, hyaluronic acid, and heparin. All materials were characterized by various analytical techniques and applied as a platform for delivery of selected drug molecules. On the basis of X-ray diffraction (presence of reflections in the 2θ angle range of 1.5–2.5°) and low-temperature nitrogen sorption isotherms (mixture of isotherms of I and IV type) additional secondary porosity was found in the mesopore range. Additional tests were also conducted to determine the possibility of loading selected molecules with biological activity into the aforementioned materials and then releasing them in the therapeutic process. Molecules with different therapeutic options were selected for testing, namely ibuprofen, curcumin, and ferulic acid with anti-inflammatory, potentially anticancer, antioxidant, and skin discoloration activities, respectively. Preliminary studies have confirmed the possibility of using hierarchical zeolites as potential carriers for bioactive molecules, as the loading percentage of active substances ranged from 39–79% and cumulative release for ibuprofen reached almost 100% after 8 h of testing.

Solid Lipid Nanoparticles (SLN) have been prepared by high-pressure homogenization and optimized in order to protect ferulic acid from Ferula assa-foetida L. extract. The influence of lipid and surfactant concentration on the mean particle size (Z-Ave), polydispersity index (PDI), and zeta potential (ZP) of SLN was analyzed. In addition, other parameters for the preparation of ferulic acid-loaded nanoparticles, such as extract concentration and variable parameters for the synthesis method used (e.g., pressure), were adjusted to obtain the smallest particle size and polydispersity index, as well as the highest value for zeta potential, which are characteristic of the stable SLN. The established formulation obtained from the optimized synthesis was composed of 6.0 wt.% of the lipid phase and 1.5 wt.% of surfactant, giving stable SLN with Z-Ave, PDI, and ZP values of 163.00 ± 1.06 nm, 0.16 ± 0.01, and −41.97 ± 0.47 mV, respectively. The loading of ferulic acid from Ferula assa-foetida L. extract within the SLN resulted in particles with a mean size of 155.3 ± 1.1 nm, polydispersity index of 0.16 ± 0.01, zeta potential of −38.00 ± 1.12 mV, and encapsulation efficiency of 27%, the latter being quantified on the basis of RP-HPLC analysis. Our findings highlight the added value of SLN as a delivery system for phenolic phytochemical compounds extracted from Ferula assa-foetida L.

The mother’s uterine immune system is dominated by uterine natural killer (NK) cells during the first trimester of pregnancy. These cells express killer cell immunoglobulin-like receptors (KIRs) of inhibitory or activating function. Invading extravillous trophoblast cells express HLA-C molecules, and both maternal and paternal HLA-C allotypes are presented to KIRs. Endoplasmic reticulum aminopeptidase 1 (ERAP1) and 2 (ERAP2) shape the HLA class I immunopeptidome. The ERAPs remove N-terminal residues from antigenic precursor peptides and generate optimal-length peptides to fit into the HLA class I groove. The inability to form the correct HLA class I complexes with the appropriate peptides may result in a lack of immune response by NK cells. The aim of this study was to investigate the role of ERAP1 and ERAP2 polymorphisms in the context of KIR and HLA-C genes in recurrent implantation failure (RIF). In addition, for the first time, we showed the results of ERAP1 and ERAP2 secretion into the peripheral blood of patients and fertile women. We tested a total of 881 women. Four hundred ninety-six females were patients who, together with their partners, participated in in vitro fertilization (IVF). A group of 385 fertile women constituted the control group. Women positive for KIR genes in the Tel AA region and HLA-C2C2 were more prevalent in the RIF group than in fertile women (p/pcorr. = 0.004/0.012, OR = 2.321). Of the ERAP polymorphisms studied, two of them (rs26653 and rs26618) appear to affect RIF susceptibility in HLA-C2-positive patients. Moreover, fertile women who gave birth in the past secreted significantly more ERAP1 than IVF women and control pregnant women (p < 0.0001 and p = 0.0005, respectively). In the case of ERAP2, the opposite result was observed; i.e., fertile women secreted far less ERAP2 than IVF patients (p = 0.0098). Patients who became pregnant after in vitro fertilization embryo transfer (IVF-ET) released far less ERAP2 than patients who miscarried (p = 0.0032). Receiver operating characteristic (ROC) analyses indicate a value of about 2.9 ng/ml of ERAP2 as a point of differentiation between patients who miscarried and those who gave birth to a healthy child. Our study indicates that both ERAP1 and ERAP2 may be involved in processes related to reproduction.

Over the last decades, we have witnessed an increasing interest in food-related products containing vegetable oils. These oils can be obtained either by extraction or by mechanical pressing of different parts of plants (e.g., seeds, fruit, and drupels). Producers of nutraceuticals have ceaselessly searched for unique and effective natural ingredients. The enormous success of argan oil has been followed by discoveries of other interesting vegetable oils (e.g., pomegranate oil) containing several bioactives. This work describes the pomegranate fruit extract and seed oil as a rich source of conjugated linolenic acid as a metabolite of punicic acid (PA), deriving from the omega-5 family (ω-5). Through the chemical characterization of PA, its nutritional and therapeutic properties are highlighted together with the physiological properties that encourage its use in human nutrition. We analyzed the composition of all fatty acids with beneficial properties occurring in pomegranate seed oil using gas chromatography (GC) with flame-ionization detection (FID) analysis combined with Fourier transform infrared spectroscopy (FTIR). Pomegranate seed oil mainly consists of 9,11,13-octadic-trienoic acid (18:3), corresponding to 73 wt % of the total fatty acids. Nine components were identified by GC in PSO, varying between 0.58 and 73.19 wt %. Using midinfrared (MIR) spectroscopy, we compared the composition of pomegranate seed oil with that of meadowfoam seed oil (MSO), which is also becoming increasingly popular in the food industry due to its high content of long chain fatty acids (C20-22), providing increased oil stability. From the results of FTIR and MIR spectroscopy, we found that punicic acid is unique in PSO (73.19 wt %) but not in MSO.

The aim of this work was to study the possibility of using medicinal plants in combination with salt-containing raw materials from the Aral Sea region for cosmetic purposes. The chemical and mineralogical compositions of salts occurring in this region were studied for pharmacological and cosmetic purposes. The salt-containing raw materials were studied by X-ray diffraction (XRD), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The microflora of saline-containing raw materials and flora of the Zhaksy-Klych lake were studied. Fifty-six plant species were identified, of which 25% belong to the Asteraceae family, 32% were Poaceae, 22% were Amaranthaceae, and 21% were Tamaricaceae. Using the solid-phase microextraction (SPME) method and comprehensive two-dimensional gas chromatography–mass spectrometry, the composition of volatile compounds in such plant species as Artemisia alba L., Achilleamillifolium L., Eleagus commutate Bernh. Ex Rydb., Psoraleadrupacea Bunge, Artemisia cipa O. Vegd., Thymus vulgaris L., Morus alba L., Salvia pratensis L., Glycyrhizaglabra L., Tanacetum vulgare L., Polygonumaviculare L., Alhagipseudoalhagi Gagnebin and Peganumharmala L., chosen on the basis of their herbal components for future cosmetic products, was determined. In total, 187 different volatile compounds were found in the endemic plant species Glycyrrhizaglabra L., of which the following were dominant: 1,7-octadiene-3-, 2,6-dimethyl- with a peak area of 4.71%; caryophyllenes; bicyclo[7.2.0]4,11,11-trimethyl-8-methylene-, [1R-(1R*,4E,9S*)]—3.70%; bicyclo[2.2.1] heptane-2-1,7,7-trimethyl-,(1S)—3.46%; cyclohexanone, 5-methyl-2-(1-methylethyledene)-; 2-isopropyledene-5—2.97%; menthol; cyclohexanol, 5-methyl-2-(1-methylethyl)-; p-menthane-3-ol; menthol alcohol; and 2-isopropyl-5—2.08%. The remaining compounds were detected in amounts of less than 2.0%. Tests of seven cosmetic compositions developed on the basis of plant extracts and salt-containing raw materials revealed that three samples had a moisturizing effect. Launching the production of cosmetic products in the Aral region will not only reduce social tensions but also significantly improve the environmental situation in the region.

Lipid nanocarriers smaller than 200 nm may be used as pharmaceutical/cosmetic raw materials as they are able to penetrate the skin. The nanostructured lipid carriers (NLCs) based on microalgae oil (Schizochytrium) and lipids extracted from diatoms (Halamphora cf. salinicola (strain SZCZM1454A)) were produced by the HSH (high shear homogenization) method. Fatty acid profile of crude oil from diatoms indicated the presence of palmitoleic, palmitic, stearic acid, oleic and myristic acids as the most common fatty acids in the strain investigated. The quantitative composition and the synthesis condition of NLC dispersions were optimized by using the full factorial designs. The physicochemical parameters of the obtained lipid nanocarriers were characterized by SEM, DSC and XRD measurements and the fraction with the optimum parameters (size below 200 nm, polydispersity index not exceeding 0.2 and zeta potential higher than +45 mV) was selected for further study. The positive charge of the obtained lipid nanoparticles is beneficial as permits electrostatic bonding with the negatively charged skin surface. As follows from stability tests, the NLCs obtained could be stored at room temperature.

Solid lipid nanoparticles (SLNs) have been synthesized as potential drug delivery systems. They are classified as solid lipid nanocarriers that can successfully carry both hydrophilic and hydrophobic drugs. SLNs are based on a biocompatible lipid matrix that is enzymatically degraded into natural components found in the human body. Solid lipid nanoparticles are suitable for the incorporation of hydrophobic active ingredients such as curcumin. The study included the optimization of lipid nanoparticle composition, incorporation of the active compound (curcumin), a stability evaluation of the obtained nanocarriers and characterization of their lipid matrix. Through process optimization, a dispersion of solid lipid nanoparticles (solid lipid:surfactant—2:1.25 weight ratio) predisposed to the incorporation of curcumin was developed. The encapsulation efficiency of the active ingredient was determined to be 99.80%. In stability studies, it was found that the most suitable conditions for conducting high-pressure homogenization are 300 bar pressure, three cycles and a closed-loop system. This yields the required values of the physicochemical parameters (a particle size within a 200–450 nm range; a polydispersity index of

In food industry, vegetable oils are commonly used as functional ingredients. Cold pressed oils containing fatty acids show a variety of chemical properties, which are mainly dependent on the saturation of fatty acids. In this study, we have analyzed meadowfoam seed oil (MSO), obtained from seeds of Limnanthes alba, and extra virgin olive oil (EVO). Firstly, the fatty acids composition, denoted as Cox value, was determined for the oils that are considered as the most stable. The Cox value for MSO reached 0.032, while that for EVO was 1.780. We have also determined the content of fatty acids in both of the oils using gas chromatography, while the use of mid-infrared (MIR) and near-infrared (NIR) spectroscopy allowed us to assign bands corresponding to the vibrations present in the tested functional groups. Significant differences in the shape and intensity of some bands were observed due to different content of unsaturated fatty acids. Vibrational spectroscopy methods confirmed the presence of long chain fatty acids in MSO.

Infertility is currently a growing problem observed around the world and is estimated to affect between 8 and 12% of reproductive-aged couples worldwide. Artificial reproductive techniques are the last chance for couples seeking their own child. Human leukocyte antigen (HLA)-G expression has been suggested as an immunomodulatory molecule that influences pregnancy outcome. The HLA-G gene encodes either membrane-bound or/and soluble proteins. The aim of this study was the evaluation of the role of soluble HLA-G (sHLA-G) and its gene polymorphism in successful implantation after in vitro fertilization embryo transfers (IVF-ETs) in different clinical protocols. We tested the HLA-G polymorphism in three positions: rs1632947: c.-964G>A; rs1233334: c.-725G>C/T in promoter region; rs371194629: c.*65_*66insATTTGTTCATGCCT in 3′ untranslated region of exon 8, in 389 patients who underwent IVF-ETs and 320 women with healthy children born after natural conception. Among the patient group, 239 women were with recurrent implantation failure and 117 women had an ongoing pregnancy or a child born after IVF-ET. We found that certain rs1632947-rs1233334-rs371194629 HLA-G haplotypes and diplotypes were associated with infertility, while others were protective. The lowest secretors of sHLA-G were G-C-ins haplotype carriers (37.21 IU/ml), while the highest -G-C-del carriers (73.80 IU/ml). Other haplotype carriers were intermediate secretors. In our study, regardless of possessed haplotype by the patient, 59.73 IU/ml sHLA-G was the threshold value with the best sensitivity (58.82%) and specificity (66.10%) to discriminate patients who achieved and maintained pregnancy from those who did not conceive or they had miscarriage (p = 0.0085; likelihood ratio, 1.74; 95% CI = 0.55–0.78). However, we do not exclude that factors other than sHLA-G may also contribute to complications in pregnancy. In addition, we found that IVF patients in cycles when frozen/thawed embryo was transferred secreted higher soluble HLA-G levels than patients with fresh embryo transferred (p = 0.021). Moreover, correlation analysis of sHLA-G concentration measured before and after embryo transfer for particular patients indicated short ovarian stimulation with gonadotropin-releasing hormone antagonist as more beneficial than long protocol with gonadotropin-releasing hormone agonist. Our study confirms a role of HLA-G polymorphism in infertility and soluble HLA-G in the early stages of pregnancy.

The aim of this study was to characterize the stability of new vehicles for the undecylenoyl phenylalanine that is used as skin-lightening agent in the melasma treatment. The purpose of this research was also to analyse the release kinetics of phenylalanine derivative from topical preparations through different synthetic membranes. Topical formulations such as two different macroemulsions, hydrogels (based on carbomer and hydroxyethylcellulose) and microemulsions were characterized in terms of stability by laser diffraction method. Additionally, multiple light scattering assessed the stability of macroemulsions. The release rates of active substance through different membranes (such as Cuprophan, nitrocellulose, cellulose acetate and Strat-M) were determined using enhancer cell. In order to explain the mechanism of release process the results were fitted with different kinetic models. New stable vehicles for Ude-Phe were successfully obtained. The results proved that the membrane structure had the influence on the release rate of undecylenoyl phenylalanine. The slowest release rate of Ude-Phe was observed when Strat-M membrane was applied. The highest amount of active substance was released from the hydrogel based on carbomer. The release of undecylenoyl phenylalanine from both macroemulsions and hydrogel based on hydroxyethylcellulose followed the Higuchi model. Whereas the release results of Ude-Phe from both microemulsion-based hydrogels and carbomer hydrogel can be described by using Korsmeyer-Peppas model. Hydrogels and microemulsion-based hydrogels could be recommended as proper vehicles for the derivative of phenylalanine. Keywords: Semi-solid formulations, Release studies, Synthetic membranes, Stability, Amino acid derivative

The surface properties of three commercial ionomer glass powders, i.e., Fuji IX, Kavitan Plus and Chemadent G-J-W were studied. Samples were analyzed by X-ray fluorescence spectroscopy (XRF), and the density was determined by gas pycnometry. Morphology was studied using scanning electron microscopy (SEM) and laser diffraction (LD) technique, whereas low-temperature nitrogen sorption measurements determined textural parameters like specific surface area and pore volume. Thermal transformations in the materials studied were evaluated by thermogravimetric analysis (TGA), which was carried out in an inert atmosphere between 30 °C and 900 °C. XRF showed that Fuji IX and Kavitan Plus powders were strontium-based, whereas Chemadent G-J-W powder was calcium-based. Powders all had a wide range of particle sizes under SEM and LD measurements. Specific surface areas and pore volumes were in the range 1.42–2.73 m2/g and 0.0029 to 0.0083 cm3/g, respectively, whereas densities were in the range 2.6428–2.8362 g/cm3. Thermogravimetric analysis showed that the glass powders lost mass in a series of steps, with Fuji IX powder showing the highest number, some of which are attributed to the dehydration and decomposition of the polyacrylic acid present in this powder. Mass losses were more straightforward for the other two glasses. All three powders showed distinct losses at around 780 °C and 835 °C, suggesting that similar dehydration steps occur in all these glasses. Other steps, which differed between glass powders, are attributed to variations in states of water-binding on their surfaces.

Abstract Vegetable oils are obtained by mechanical extraction or cold pressing of various parts of plants, most often: seeds, fruits, and drupels. Chemically, these oils are compounds of the ester-linked glycerol and higher fatty acids with long aliphatic chain hydrocarbons (min. C14:0). Vegetable oils have a variety of properties, depending on their percentage of saturation. This article describes sea-buckthorn oil, which is extracted from the well characterized fruit and seeds of sea buckthorn. The plant has a large number of active ingredients the properties of which are successfully used in the cosmetic industry and in medicine. Valuable substances contained in sea-buckthorn oil play an important role in the proper functioning of the human body and give skin a beautiful and healthy appearance. A balanced composition of fatty acids give the number of vitamins or their range in this oil and explains its frequent use in cosmetic products for the care of dry, flaky or rapidly aging skin. Moreover, its unique unsaturated fatty acids, such as palmitooleic acid (omega-7) and gamma-linolenic acid (omega-6), give sea-buckthorn oil skin regeneration and repair properties. Sea-buckthorn oil also improves blood circulation, facilitates oxygenation of the skin, removes excess toxins from the body and easily penetrates through the epidermis. Because inside the skin the gamma-linolenic acid is converted to prostaglandins, sea-buckthorn oil protects against infections, prevents allergies, eliminates inflammation and inhibits the aging process. With close to 200 properties, sea-buckthorn oil is a valuable addition to health and beauty products.

Lipid nanoparticles based on multiple emulsion (W/O/W) systems are suitable for incorporating hydrophilic active substances, including iridoid glycosides. This study involved optimization of composition of lipid nanoparticles, incorporation of active compounds (aucubin and catalpol), evaluation of stability of the resulting nanocarriers, and characterization of their lipid matrix. Based on 32 factorial design, an optimized dispersion of lipid nanoparticles (solid lipid:surfactant—4.5:1.0 wt.%) was developed, predisposed for the incorporation of iridoid glycosides by emulsification-sonication method. The encapsulation efficiency of the active substances was determined at nearly 90% (aucubin) and 77% (catalpol). Regarding the stability study, room temperature was found to be the most suitable for maintaining the expected physicochemical parameter values (particle size < 100 nm; polydispersity index < 0.3; zeta potential > |± 30 mV|). Characterization of the lipid matrix confirmed the nanometer size range of the resulting carriers (below 100 nm), as well as the presence of the lipid in the stable β’ form.

Classification of polyoxometalates (POMs) is based on their chemical composition, basically represented by two general formulae: a) [MmOy]p− b) [XxMmOy]q−, where M is the main transition metal, O is the oxygen atom and X can be a non-metal atom such as Si. Additionally, in the most cases, the structure of the polyoxometalates is derived from a combination of octahedral units MO6 with a central metal atom M and the oxygen atoms placed at their corners. In such octahedra, oxygen atoms allow the condensation between two octahedral units, while one oxygen atom (or max. two atoms) makes double bond with the central metal atom and is not shared with other metal atoms within the complex (terminal oxygens). On the other hand, niobium-containing mesoporous silicates contain mainly MO4 tetrahedra and reveal superior activity in heterogeneous catalysis. Thus, the proper coordination of niobium is crucial for the catalytic activity and will be deeply discussed. The similarity in the catalytic behavior of niobium-polyoxometalates and heterogeneous niobium single-site catalysts in selective oxidations will be demonstrated.

Almost 1600 individuals from the Polish population were recruited to this study. Among them 319 were fertile couples, 289 were recurrent spontaneous abortion (RSA) couples, and 131 were in the group of recurrent implantation failure (RIF) following in vitro fertilization. The aim of this study was to evaluate the MTHFR c.c.677 C>T and c.c.1298 A>C polymorphisms' association with RSA and RIF. We used PCR-RFLP with HinfI (677 C>T) and MboII (1298 A>C) digestion. We observed a protective effect of the female AC genotype (OR = 0.64, p = 0.01) and the C allele (AC+CC genotypes; OR = 0.65, p = 0.009) against RSA. Moreover, 1298 AA/677 CT women were more frequent in RSA (31.14%) and RIF (25.20%) groups in comparison to fertile women (22.88%), although this difference was significant only in the case of RSA (p = 0.022, OR = 1.52). Male combined genotype analysis revealed no association with reproductive failure of their partners. Nevertheless, the female/male combination AA/AC of the 1298 polymorphism was more frequent in RSA couples (p = 0.049, OR = 1.49). However, the significant results became insignificant after Bonferroni correction. In addition, analysis of haplotypes showed significantly higher frequency of the C/C haplotype (1298 C/677 C) in the female control group than in the female RSA group (p = 0.03, OR = 0.77). Moreover, the association between elevated homocysteine (Hcy) level in plasma of RSA and RIF women and MTHFR polymorphisms was investigated but did not reveal significant differences. In conclusion, for clinical practice, it is better to check the homocysteine level in plasma and, if the Hcy level is increased, to recommend patients to take folic acid supplements rather than undergo screening of MTHFR for 1298 A>C and 677 C>T polymorphisms.

The encapsulation of bicyclic monoterpene α-pinene into solid lipid nanoparticles (SLN) is reported using experimental factorial design, followed by high-end dispersion analyzer LUMiSizer®. This equipment allows the characterization of the α-pinene-loaded SLN instability phenomena (e.g., sedimentation, flotation or coagulation), as well as the determination of the velocity distribution in the centrifugal field and the particle size distribution. In this work, SLN were produced by hot high-pressure homogenization technique. The influence of the independent variables, surfactant and lipid ratio on the physicochemical properties of SLN, such as mean particle size (Z-Ave), polydispersity index (PDI) and zeta potential (ZP), was estimated using a 22-factorial design. The Z-Ave and PDI were analyzed by dynamic light scattering, while ZP measurements were recorded by electrophoretic light scattering. Based on the obtained results, the optimal SLN dispersion was composed of 1 wt.% of α-pinene, 4 wt.% of solid lipid (Imwitor® 900 K) and 2.5 wt.% of surfactant (Poloxamer 188), depicting 136.7 nm of Z-Ave, 0.170 of PDI and 0 mV of ZP. Furthermore, LUMISizer® has been successfully used in the stability analysis of α-pinene-loaded SLN.

A case report of exposure and neurotrophic keratopathy after acoustic neuroma surgery resulting in perforation if not managed appropriately and timely is presented. Sclerokeratoplasty on 360 degrees may be an effective treatment method of corneal perforation in complete anaesthetic cornea when the standard penetrating keratoplasty failed. At a 12-month follow-up, the patient is doing well. UCVA is 0.5, the IOP is normal, and the graft remains clear. Systemic immunosuppression is the main disadvantage of this method. Further investigation is needed to assess the effectiveness and safety of this method.

BACKGROUND: Recipient NK cells may detect the lack of recipient's (i.e., self) HLA antigens on donor renal tissue by means of their killer cell immunoglobulin-like receptors (KIRs). KIR genes are differently distributed in individuals, possibly contributing to differences in response to allogeneic graft. METHODOLOGY/PRINCIPAL FINDINGS: We compared frequencies of 10 KIR genes by PCR-SSP in 93 kidney graft recipients rejecting allogeneic renal transplants with those in 190 recipients accepting grafts and 690 healthy control individuals. HLA matching results were drawn from medical records. We observed associations of both a full-length KIR2DS4 gene and its variant with 22-bp deletion with kidney graft rejection. This effect was modulated by the HLA-B,-DR matching, particularly in recipients who did not have glomerulonephritis but had both forms of KIR2DS4 gene. In contrast, in recipients with glomerulonephritis, HLA compatibility seemed to be much less important for graft rejection than the presence of KIR2DS4 gene. Simultaneous presence of both KIR2DS4 variants strongly increased the probability of rejection. Interestingly, KIR2DS5 seemed to protect the graft in the presence of KIR2DS4fl but in the absence of KIR2DS4del. CONCLUSIONS/SIGNIFICANCE: Our results suggest a protective role of KIR2DS5 in graft rejection and an association of KIR2DS4 with kidney rejection, particularly in recipients with glomerulonephritis.

BACKGROUND: KIR2DS5 gene encodes an activating natural killer cell receptor whose ligand is not known. It was recently reported to affect the outcome of hematopoietic stem cell transplantation. METHODOLOGY/PRINCIPAL FINDINGS: In our studies on KIR2DS5 gene associations with human diseases, we compared the frequencies of this gene in patients and relevant controls. Typing for KIR2DS5 gene was performed by either individual or multiplex polymerase chain reactions which, when compared in the same samples, gave concordant results. We noted an apparently protective effect of KIR2DS5 gene presence in several clinical conditions, but not in others. Namely, this effect was observed in ankylosing spondylitis (p=0.003, odds ratio [OR]=0.47, confidence interval [CI]=0.28-0.79), endometriosis (p=0.03, OR=0.25, CI = 0.07-0.82) and acute rejection of kidney graft (p=0.0056, OR=0.44, CI=0.24-0.80), but not in non-small-cell lung carcinoma, rheumatoid arthritis, spontaneous abortion, or leukemia (all p>0.05). In addition, the simultaneous presence of KIR2DS5 gene and HLA-C C1 allotype exhibited an even stronger protective effect on ankylosing spondylitis (p=0.0003, OR=0.35, CI=0.19-0.65), whereas a lack of KIR2DS5 and the presence of the HLA-C C2 allotype was associated with ankylosing spondylitis (p=0.0017, OR=1.92, CI=1.28-2.89), whereas a lack of KIR2DS5 and presence of C1 allotype was associated with rheumatoid arthritis (p=0.005, OR=1.47, CI=1.13-1.92). The presence of both KIR2DS5 and C1 seemed to protect from acute kidney graft rejection (p=0.017, OR=0.47, CI=0.25-0.89), whereas lack of KIR2DS5 and presence of C2 seemed to favor rejection (p=0.0015, OR=2.13, CI=1.34-3.37). CONCLUSIONS/SIGNIFICANCE: Our results suggest that KIR2DS5 may protect from endometriosis, ankylosing spondylitis, and acute rejection of kidney graft.