Search

Background: A vast range of factors lead to psychological distress among stroke patients causing poor outcomes. Aims: To assess the prevalence of psychological distress and identify the factors associated with it among the patients with stroke attending the Neurology Clinics of the National Hospital of Sri Lanka (NHSL), Colombo. Methods: A descriptive cross-sectional study was conducted among 177 patients with stroke attending the Neurology Clinics of the NHSL, Colombo who were sampled by multistage random sampling. Results: The mean age of the participants with stroke was 59.6 (SD 12.285) years. The prevalence of psychological distress among stroke patients was found to be 23.3% (95% CI: 16.1 - 31.9). During bivariate analysis, six factors (p < 0.05) were significant. The regression analysis identified five independent predictors: age (b = -.134, p < 0.05), gender (b = 4.262, p = 0.05), patient being the sole source of income (b = 3.207, p < 0.05), level of disability (b = 2.568, p < 0.001) and past personal history of psychiatric disorders (b = 5.151, p < 0.05) with a R2 of 0.772. Conclusion: The prevalence of psychological distress among patients with stroke attending the Neurology Clinics of the NHSL, Colombo.

Abstract Tryptophan is frequently found on the surface of membrane-associated proteins that interact with the lipid membrane. However, because of their multifaceted interactions, it is difficult to pinpoint the structure-activity relationship of each tryptophan residue. Here, we describe the use of racemic protein crystallography to probe dedicated tryptophan interactions of a model tryptophan-rich bacteriocin aureocin A53 (AucA) by inclusion and/or exclusion of potential ligands. In the presence of tetrahedral anions that are isosteric to the head group of phospholipids, distinct tryptophan H-bond networks were revealed. H-bond donation by W40 was critical for antibacterial activity, as its substitution by 1-methyltryptophan resulted in substantial loss of activity against bacterial clinical isolates. Meanwhile, exclusion of tetrahedral ions revealed that W3 partakes in formation of a dimeric interface, thus suggesting that AucA is dimeric in solution and dissociated to interact with the phosphate head group in the presence of the lipid membrane. Based on these findings, we could predict the tryptophan residue responsible for activity as well as the oligomeric state of a distant homologue lacticin Q (48%).

Rapid evolution of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and influenza A virus (IAV) poses enormous challenge in the development of broad-spectrum antivirals that are effective against the existing and emerging viral strains. Virus entry through endocytosis represents an attractive target for drug development, as inhibition of this early infection step should block downstream infection processes, and potentially inhibit viruses sharing the same entry route. In this study, we report the identification of 1,3-diphenylurea (DPU) derivatives (DPUDs) as a new class of endocytosis inhibitors, which broadly restricted entry and replication of several SARS-CoV-2 and IAV strains. Importantly, the DPUDs did not induce any significant cytotoxicity at concentrations effective against the viral infections. Examining the uptake of cargoes specific to different endocytic pathways, we found that DPUDs majorly affected clathrin-mediated endocytosis, which both SARS-CoV-2 and IAV utilize for cellular entry. In the DPUD-treated cells, although virus binding on the cell surface was unaffected, internalization of both the viruses was drastically reduced. Since compounds similar to the DPUDs were previously reported to transport anions including chloride (Cl-) across lipid membrane and since intracellular Cl- concentration plays a critical role in regulating vesicular trafficking, we hypothesized that the observed defect in endocytosis by the DPUDs could be due to altered Cl- gradient across the cell membrane. Using in vitro assays we demonstrated that the DPUDs transported Cl- into the cell and led to intracellular Cl- accumulation, which possibly affected the endocytic machinery by perturbing intracellular Cl- homeostasis. Finally, we tested the DPUDs in mice challenged with IAV and mouse-adapted SARS-CoV-2 (MA 10). Treatment of the infected mice with the DPUDs led to remarkable body weight recovery, improved survival and significantly reduced lung viral load, highlighting their potential for development as broad-spectrum antivirals.

INTRODUCTION: Stroke is the fifth leading cause of disability adjusted life years lost in Sri Lanka. A vast range of factors lead to psychological distress among stroke patients causing poor outcomes such as limitations of daily activities, poor rehabilitation outcomes, social isolation, and poor financial recovery. Nevertheless, there is a scarcity of data on this topic, in both foreign and local literature. OBJECTIVES: To assess the prevalence of psychological distress and identify the factors associated with it among the patients with stroke attending the clinics of National Institute of Neurology (NIN), National Hospital of Sri Lanka (NHSL), Colombo. METHODS: A descriptive cross-sectional study with an analytical component was conducted among 177 patients with stroke attending the clinics of National Institute of Neurology, National Hospital of Sri Lanka, Colombo who were sampled by multistage random sampling. The 10-item Kessler psychological distress scale was used to assess the psychological distress while the Barthel Index and the modified Rankin Scale were used to assess the dependence on the Activities of Daily Living (ADL) and disability status respectively. Data was collected regarding socio-demographic, behavioral, family and caregiver, stressful life events, stroke and other health related factors using a pretested interviewer administered questionnaire. Chi-square tests, simple logistic regression was used for bivariate analysis followed by multivariate analysis via binary logistic regression. Results obtained from the final regression model were expressed using odds ratios with 95% confidence intervals whilst associations with p-value < 0.05 were significant in all types of analyses. RESULTS: The mean age of the participants with stroke was 59.6 (SD 12.285) years. The prevalence of psychological distress among stroke patients was found to be 23.3% (95% CI: 16.1 - 31.9) using the validated K10 score of ≥22. During bivariate analysis, none of the sociodemographic, family and caregiver related, and stressful life event related factors were significantly associated while past personal history and family history of psychiatric disorders, frequency of engagement in physical and leisure time activities prior to the stroke event, time since the last stroke event, level of disability and dependence on ADL (p < 0.05) were found to be significant predictors of psychological distress. The results of regression identified five independent predictors with a R2 of 0.772. There, the presence of psychological distress was significantly predicted by age (b = -.134, p < 0.05), gender (b = 4.262, p = 0.05), patient being the sole source of income (b = 3.207, p < 0.05), ii level of disability (b = 2.568, p < 0.001) and past personal history of psychiatric disorders (b = 5.151, p < 0.05). CONCLUSION: The prevalence of psychological distress among patients with stroke attending the clinics of the NIN, NHSL, Colombo is high and is associated with several health and non-health related factors. A standard routine screening method should be formulated for early diagnosis of patients at risk of psychological distress supplemented by a multidisciplinary approach including psychosocial support starting from the initial out-patient management of stroke patients.

Having control over the architecture of functional materials to maximize their exposed surface area and the working potential window is critical yet challenging for surface‐sensitive applications, including energy storage and environmental remediation. Herein, a sustainable and green strategy is established to fabricate activated carbon (AC) materials with designed microstructures including stratified architecture comprising stacked nanosheets with a surface area of 1743 m2 g−1 and 3D scaffold with homogeneously distributed surface nanoholes with surface area as high as 2120 m2 g−1. An optimized pathway toward the fabrication of symmetric supercapacitors (SCs), highlighting impacts of AC precursors, activation process, and oxide nanostructures on electrochemical behaviors of the resultant ACs, is also offered. The representative symmetric two‐ and three‐electrode electric double‐layer capacitor (EDLC) configuration cells are fabricated using coffee‐ and textile‐derived ACs with high gravimetric capacitances of 377 and 356 F g−1, respectively. Coffee‐derived AC exhibits excellent capacitance retention of 93% after ≈18 000 cycles under a remarkable potential window of 2.7 V in aqueous media. The findings broaden the current understanding on the optimization of electrochemical behavior of ACs using structural and morphological modifications, while uncovering the impacts of oxides on improving both energy density and cycling stability of AC‐based SCs.

Root-knot nematodes are believed to be amongst the biological constraints causing severe damage and a great reduction in the productivity of okra. The purpose of this study was to apply organic matter and non-symbiotic nitrogen-fixing bacteria to minimize the addition of chemical fertilizers that constantly pollute the environment. Experimental studies were conducted in the field for two summers to determine the effect of inoculations of non-symbiotic nitrogen-fixing bacteria, such as Azotobacter chroococcum and Azospirillum brasilense singly and in combinations, with different recommended doses of inorganic nitrogen as well as organic matter such as neem seed cake on the growth, yield, and organic parameters of the okra crop towards the management of plant-parasitic nematodes. The results show a significant reduction in nematode multiplication through soil application of nitrogen-fixing bacteria and neem seed cake along with different recommended doses of nitrogen inoculated plants. Azotobacter was found to be less effective than Azospirillum in agronomic parameters and nematode control. The most pronounced increases were observed in the yield and growth parameters such as plant height, fresh as well as dry weights, fruit weights/plant, number of total fruits/plant and primary branches, chlorophyll content, and ascorbic acid content when A. chroococcum and A. brasilense were added concomitantly in various combinations. Agronomic parameters such as NPK content in the plant as well as in residual soil increased considerably in almost all the combinations irrespective of these biofertilizers and neem seed cake. In conclusion, the combined application of a 100% recommended dose of nitrogen fertilizer along with Azospirillum and neem seed cake is recommended for better growth and yield of okra with better control of nematodal population.

No abstract available

No abstract avalable

No abstract available

Experiments were conducted at the University Agricultural Research Farm for the two consecutive years, 2013–2014 and 2014–2015 to study the individual and interactive effects of different plant symbionts (Glomus fasciculatum, Mesorhizobium ciceri), bio-organic waste (Avena sativa straw) and antagonistic fungi, Trichoderma harzianum in all possible combinations for biocontrol of root-knot nematode, Meloidogyne incognita infecting chickpea var. Avrodhi. Biocontrol agents and organic wastes were evaluated for their efficacy in terms of growth characteristics, chlorophyll content, nutrients status, mycorrhization and nematode-related parameters. Combined treatments resulted in higher plant growth, biomass, chlorophyll and nutrient status (N, P and K). Antagonistic fungi, Trichoderma harzianum @ 106 spores plant−1 proved to be most effective of all the plant symbionts (G. fasciculatum, M. ciceri) and organic waste in suppressing the nematode-related parameters in chickpea plants. Of all the treatments, combined inoculation of AM fungus (Glomus fasciculatum @ 800 spores plant−1) + root-nodulating bacteria (Mesorhizobium ciceri @ 1gplant−1) + organic waste (Avena sativa straw @ 10gplant−1) and antagonistic fungi (Trichoderma harzianum @ 106 spores plant−1) was found to be the most efficient in improving the plant growth parameters and decreasing the root-knot development of M. incognita in chickpea plants. Keywords: AM fungi, Chickpea, Interaction, Root-knot nematode, Rhizobium, Trichoderma harzianum

Efficiency of an organic matter like Tagetes erecta and bioinoculants Azotobacter chroococcum and Glomus fasciculatum was investigated in tomato cultivar ‘Pusa Ruby’ when inoculated individually as well as concomitantly for the management of the root-knot nematode, Meloidogyne incognita in terms of growth parameters such as plant length, fresh and dry weights, chlorophyll content, per cent pollen fertility and mycorrhization. Greatest reduction in the numbers of second-stage juveniles in soil, number of root-galls, egg-masses and nematode multiplication was recorded with combined application of T. erecta and bio-inoculants A. chroococcum and G. fasciculatum as compared to untreated control and other treatments. Similarly, the greatest improvement in the plant growth and biomass of tomato was noted in the same treatments. However, individual inoculation of these bio-inoculants and organic fertilizers also showed significant enhancement but was less as compared to combined treatment. A. chroococcum was found most effective against disease incidence followed by G. fasciculatum and T. erecta. Parameters like NP and K contents were significantly enhanced in those plants which received combined treatments of organic matter and bio-inoculants. Azotobacter was found more efficacious against nematodes than Glomus fasciculatum. Organic matter also influenced the activity of bio-inoculants, more with the Azotobacter than G. fasciculatum. DOI: http://dx.doi.org/10.3126/ije.v4i2.12643 International Journal of Environment Vol.4(2) 2015: 206-220

A pot experiment was conducted during 2013–14 to observe the potential role of some organics and bio-organics such as Calotropis procera, Glomus fasciculatum, and Azotobacter chroococcum on some growth attributes of chickpea and subsequently on the root-knot development caused by Meloidogyne incognita. Individual and conjoint treatments significantly enhanced the plant growth parameters as compared to unamended control. Physiological parameter such as chlorophyll content also exhibited significant improvement in all the treatments over non-amended control. The highest improvement in growth parameters of chickpea was observed in combined application of G. fasciculatum and A. chroococcum in pots amended with C. procera. Moreover, combined treatments of both bio-inoculants and C. procera markedly reduced the multiplication and reproduction rate of root-knot nematodes in terms of number of root galls and nematode population. Percent mycorrhization in terms of external and internal colonizations was increased significantly in plant amended with organic and bio-organics conjointly. The regression studies revealed significant relationship between number of galls and some plant growth variables. Present findings may promote organic-based farm products and eco-friendly management of M. incognita as this is a safer and cost-effective option.

Soil application of organics has been explored as an alternative means of organic management of plant-parasitic nematodes. Efficiency of different oil-seed cakes of neem (Azadirachta indica), castor (Ricinus communis), groundnut (Arachis hypogaea), linseed (Linum usitatissimum), sunflower (Helianthus annuus) and soybean (Glycine max) were evaluated in field conditions with association of Pseudomonas fluorescens in relation to growth parameters of chickpea and population of plant-parasitic nematodes. Their efficacious nature was highly effective in reducing the population of these dominant soil nematodes. Significant improvement was observed in plant-growth parameters such as plant weight, percent pollen fertility, pod numbers, root-nodulation and chlorophyll content of chickpea, seemed to be due to reduction in disease incidence and might be due to growth promoting substances secreted by P. fluorescens. The multiplication rate of nematodes was less in the presence of P. fluorescens as compared to its absence. Most effective combination of P. fluorescens was observed with neem cake.

A pot experiment was conducted during winter season of 2009–2010 in the department of Botany, AMU, Aligarh, India, to determine the nematicidal potential of organic matter, neem cake at third level of dose, and bioagent, Glomus fasciculatum in terms of various growth parameters of tomato, when inoculated individually as well as concomitantly with respect to root-knot development. Neem cake and G. fasciculatum showed potential for sustainable management while providing nutrient sources for proper plant growth. Disease intensity of root-knot nematode decreased while increasing the doses of neem cake along with the G. fasciculatum. Chlorophyll contents have been found to be increased in single and combined application as well. There is a progressive increase in growth parameters raised in soil amended with 10, 20, and 30 g neem cake/kg soil and inoculated with G. fasciculatum. Significant improvement in the plant growth was observed when G. fasciculatum and neem cake were inoculated simultaneously. Neem cake plus G. fasciculatum reduced the nematodes’ multiplication and root-galling, and increased the plant growth of tomato as compared to unamended and Meloidogyne incognita-inoculated plants. Mycorrhyzation and agronomic parameters were increased due to application of G. fasciculatum alone, but enhanced further when inoculated with neem cake.

A disease complex involving Meloidogyne incognita–Rhizoctonia solani was studied on tomato (Lycopersicon esculentum var. Pusa Ruby) under glasshouse conditions to determine their concomitant effect on plant growth variables. Biofertilizers Nerium indicum and Trichoderma harzianum were tested against both pathogens individually as well as concomitantly and found its role in minimizing disease severity. Inoculation of M. incognita and R. solani resulted a significant reduction in plant growth variables over control. The plant growth variables reduction was more pronounced by M. incognita as compared to R. solani. However, T. harzianum exhibited their potential against the disease complex but was less effective than N. indicum. A manifold improvement in plant growth parameters was observed when plants were treated with biofertilizers, N. indicum and T. harzianum simultaneously. The present work has revealed that the combined application of N. indicum and T. harzianum may be a better option for the management of disease complex M. incognita–R. solani on tomato. Application of these biofertilizers after field trials may be suitable module of organic farming.

An experiment was conducted to assess the effect of Rhizobium sp., waste tea leaves, eggshell powder, and composted cow dung manure on the root-knot nematode, Meloidogyne incognita, on lentil in Botany department AMU, Aligarh, India. When used alone, composted cow dung was better in reducing galling and nematode multiplication and improving lentil growth followed by eggshell powder, Rhizobium sp., and waste tea leaves. Significant result in the integrated management of M. incognita was obtained when Rhizobium sp. was used in combination with cow dung and eggshell powder (with or without waste tea leaves). Combined application of root nodule bacterium and organic wastes like waste tea leaves, eggshell, and cow dung may be suggested to the farmers/growers or related persons who are having great enthusiasm to establish a lentil production business. Application of these organic materials along with the root nodule bacteria may be helpful to foster soil ecosystem which has been a hot topic in the present scenario.

This paper details the characterisation of char obtained by high-temperature pyrolysis of waste macadamia shell biomass and its application as carbon source in iron-carbon alloy production. The obtained char was characterised by ultimate and proximate analysis, X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), X-ray photon spectroscopy (XPS), Brunauer-Emmett-Teller (BET) surface area via N2 isothermal adsorption and scanning electron microscopy (SEM). The results indicated that obtained char is less porous, low in ash content, and high in carbon content. Investigation of iron-carbon alloy formation through carbon dissolution at 1550 °C was carried out using sessile drop method by using obtained char as a carbon source. Rapid carbon pickup by iron was observed during first two minutes of contact and reached a saturation value of ~5.18 wt % of carbon after 30 min. The carbon dissolution rate using macadamia char as a source of carbon was comparatively higher using than other carbonaceous materials such as metallurgical coke, coal chars, and waste compact discs, due to its high percentage of carbon and low ash content. This research shows that macadamia shell waste, which has a low content of ash, is a valuable supplementary carbon source for iron-carbon alloy industries.

Graphene-based nanomaterials have been proved to be robust sorbents for efficient removal of environmental contaminants including arsenic (As). Biobased graphene oxide (bGO-P) derived from sugarcane bagasse via pyrolysis, GO-C via chemical exfoliation, and magnetite nanoparticles (FeNPs) via green approach using Azadirachta indica leaf extract were synthesized and characterized by Ultraviolet-Visible Spectrophotometer (UV-vis.), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), mean particle size and Scanning electron microscopy (SEM) along with Energy dispersive spectroscopy (EDX) analysis. Compared to cellulose and hemicellulose, the lignin fraction was less in the precursor material. The GOC, bGO-P and FeNPs displayed maximum absorption at 230, 236, and 374 nm, respectively. FTIR spectrum showed different functional groups (C-OH, C-O-C, COOH and O-H) modifying the surfaces of synthesized materials. Graphene based nanomaterials showed clustered dense flakes of GO-C and thin transparent flakes of bGO-P. Elemental composition by EDX analysis of GO-C (71.26% C and 27.36% O), bGO-P (74.54% C and 24.61% O) and FeNPs (55.61% Fe, 4.1% C and 35.72% O) confirmed the presence of carbon, oxygen, and iron in synthesized nanomaterials. Sorption study was conducted with soil amended with different doses of synthesized nanomaterials (10, 50 and 250 mg) and exposed to 100, 300 and 500 ppm of As. Arsenic concentrations were estimated by colorimetry and atomic absorption spectroscopy (AAS). GO-C, bGO-P, and FeNPs showed substantial As removal efficiency i.e., 81 to 99.3%, 65 to 98.8% and 73.1-89.9%, respectively. Green synthesis of bGO-P and magnetite nanoparticles removed substantial amounts of As compared to GO-C and can be effectively deployed for As removal or immobilization. Higher and medium sorbent doses (250 and 50 mg) exhibited greater As removal and data was best fitted for Freundlich isotherm evidencing favorable sorption. Nevertheless, at low sorbent doses, data was best fitted for both models. Newly synthesized nanomaterials emerged as promising materials for As removal strategy for soil nano-remediation and can be effectively deployed in As contaminated soils., (© 2024. The Author(s).)

This study investigated the adsorption of Oxytetracycline (OTC) from pharmaceutical wastewater using a kappa carrageenan based hydrogel (KPB). The aim of the present study was to explore the potential of KPB for long-term pharmaceutical wastewater treatment. A sustainable adsorbent was developed to address oxytetracycline (OTC) contamination. The hydrogel's structural and adsorption characteristics were examined using various techniques like Scanning Electron Microscope (SEM), Fourier Transform Infrared (FTIR), X-ray powder diffraction (XRD), and kinetic models. The results revealed considerable changes in the vibrational modes and adsorption bands of the hydrogel, suggesting the effective functionalization of Bentonite nano-clay. Kappa carrageenan based hydrogel achieved the maximum removal (98.5%) of OTC at concerntration of 40 mg/L, pH 8, cotact time of 140 min and adsorbent dose of 0.1 g (KPB-3). Adsorption of OTC increased up to 99% with increasing initial concentrations. The study achieved 95% adsorption capacity for OTC using a KPB film at a concentration of 20 mg/L and a 0.1 g adsorbent dose within 60 min. It also revealed that chemisorptions processes outperform physical adsorption. The Pseudo-Second-Order model, which emphasized the importance of chemical adsorption in the removal process, is better suited to represent the adsorption behavior. Excellent matches were found that R 2  = 0.99 for KPB-3, R 2  = 0.984 for KPB-2 and R 2  = 0.989 for KPB-1 indicated strong chemical bonding interactions. Statisctical analysis (ANOVA) was performed using SPSS (version 25) and it was found that pH and concentration had significant influence on OTC adsorption by the hydrogel, with p-values less than 0.05. The study identified that a Kappa carrageenan-based hydrogel with bentonite nano-clay and polyvinyl alcohol (PVA) can efficiently remove OTC from pharmaceutical effluent, with a p-value of 0.054, but weak positive linear associations with pH, temperature, and contact time. This research contributed to sustainable wastewater treatment and environmental engineering., (© 2024. The Author(s).)

Present study assessed the growth of two plant species and ion uptake by them grown on different proportion of industrial solid waste and garden soil. The industrial waste having high concentration of chemicals were used with garden soil at different proportion i.e. 0% (T0), 5% (T1), 10% (T2), 15% (T3) and 20% (T4). Two species namely Conocarpus erectus (alien plant) and Dodonaea viscosa (indigenous) were used as test plants in pot study. Different parameters including growth, physiology, and anatomy of plants and concentration of cations (Na + , K + , Ca 2+ , and Mg 2+ ) in the plant shoot and root were measured at different time duration (initial, 1 st , 2 nd , 3 rd and 4 th month). The key objective of the study was to use these plants to establish their plantations on the barren lands where industrial solid wastes were being disposed of. C. erectus showed better growth than D. viscosa, as well as more uptake of ions. A significant increase in plant growth was observed in fourth month in T1, where plant height reached 24.5% and 46% for C. erectus and D. viscosa, respectively. At harvest, in C. erectus, no significant difference in the fresh (65-78 g) and dry weight (24-30 g) of the shoot was observed across treatments compared to the control. In D. viscosa, at the time of harvest, the fresh and dry weights of the root and shoot showed a strong, significantly decreasing pattern across T1, T2, and T3, leading to the death of the plant at T3 and T4. Further, optimum ratio of waste soil to garden soil was found as 10:90 and 20:80 to establish the plantations of D. viscosa and C. erectus, respectively in areas where such solid waste from industries are disposed. Findings can be used for the restoration of such solid waste for the sustainable management of industrial areas and their associated ecosystems., (© 2024. The Author(s).)

In the current arena, new-generation functional nanomaterials are the key players for smart solutions and applications including environmental decontamination of pollutants. Among the plethora of new-generation nanomaterials, graphene-based nanomaterials and nanocomposites are in the driving seat surpassing their counterparts due to their unique physicochemical characteristics and superior surface chemistry. The purpose of the present research was to synthesize and characterize magnetite iron oxide/reduced graphene oxide nanocomposites (FeNPs/rGO) via a green approach and test its application in the degradation of methylene blue. The modified Hummer's protocol was adopted to synthesize graphene oxide (GO) through a chemical exfoliation approach using a graphitic route. Leaf extract of Azadirachta indica was used as a green reducing agent to reduce GO into reduced graphene oxide (rGO). Then, using the green deposition approach and Azadirachta indica leaf extract, a nanocomposite comprising magnetite iron oxides and reduced graphene oxide i.e., FeNPs/rGO was synthesized. During the synthesis of functionalized FeNPs/rGO, Azadirachta indica leaf extract acted as a reducing, capping, and stabilizing agent. The final synthesized materials were characterized and analyzed using an array of techniques such as scanning electron microscopy (SEM)-energy dispersive X-ray microanalysis (EDX), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction analysis, and UV-visible spectrophotometry. The UV-visible spectrum was used to evaluate the optical characteristics and band gap. Using the FT-IR spectrum, functional groupings were identified in the synthesized graphene-based nanomaterials and nanocomposites. The morphology and elemental analysis of nanomaterials and nanocomposites synthesized via the green deposition process were investigated using SEM-EDX. The GO, rGO, FeNPs, and FeNPs/rGO showed maximum absorption at 232, 265, 395, and 405 nm, respectively. FTIR spectrum showed different functional groups (OH, COOH, C=O), C-O-C) modifying material surfaces. Based on Debye Sherrer's equation, the mean calculated particle size of all synthesized materials was < 100 nm (GO = 60-80, rGO = 90-95, FeNPs = 70-90, Fe/GO = 40-60, and Fe/rGO = 80-85 nm). Graphene-based nanomaterials displayed rough surfaces with clustered and spherical shapes and EDX analysis confirmed the presence of both iron and oxygen in all the nanocomposites. The final nanocomposites produced via the synthetic process degraded approximately 74% of methylene blue. Based on the results, it is plausible to conclude that synthesized FeNPs/rGO nanocomposites can also be used as a potential photocatalyst degrader for other different dye pollutants due to their lower band gap., (© 2024. The Author(s).)

The urgent need to address the severe environmental risk posed by chromium-contaminated industrial wastewater necessitates the development of eco-friendly cleanup methodologies. Utilizing the Ficus benghalensis plant extracts, the present study aims to develop green zinc oxide nanoparticles for the removal of Cr metal ions from wastewater. The leaves of Ficus benghalensis, often known as the banyan tree, were used to extract a solution for synthesizing ZnO NPs. These nanoparticles were developed with the goal of efficiently eliminating chromium (Cr) from industrial effluents. Batch studies were carried out to assess the efficiency of these synthesized ZnO NPs in treating leather industrial effluent, with aiming for optimal chromium removal. This involved measuring the nanoparticles' capacity to adsorb Cr ions from wastewater samples by comparing chromium levels before and after treatment. Removal efficiency for Cr was estimated through the batches such as optimization of pH, contact time, initial Cr concentration and sorbent dose of ZnO NPs were of the batches. These synthesized ZnO NPs were found to be successful in lowering chromium levels in wastewater to meet permissible limit. The nanoparticles exhibited their highest absorption capacity, reaching 94 % (46 mg/g) at pH 4, with a contact time of 7 hours with the optimum sorbent dose of 0.6 g/L. Hence, the excellent adsorption capabilities of these nanoparticles, together with their environmentally benign manufacturing technique, provide a long-term and efficient solution for chromium-contaminated wastewater treatment. Its novel nature has the potential to significantly improve the safety and cleanliness of water ecosystems, protecting the both i.e. human health and the environment., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

The aim of the present study was to assess the drinking water quality in the selected urban areas of Lahore and to comprehend the public health status by addressing the basic drinking water quality parameters. Total 50 tap water samples were collected from groundwater in the two selected areas of district Lahore i.e., Gulshan-e-Ravi (site 1) and Samanabad (site 2). Water samples were analyzed in the laboratory to elucidate physico-chemical parameters including pH, turbidity, temperature, total dissolved solids (TDS), electrical conductivity (EC), dissolved oxygen (DO), total hardness, magnesium hardness, and calcium hardness. These physico-chemical parameters were used to examine the Water Quality Index (WQI) and Synthetic Pollution Index (SPI) in order to characterize the water quality. Results of th selected physico-chemical parameters were compared with World Health Organization (WHO) guidelines to determine the quality of drinking water. A GIS-based approach was used for mapping water quality, WQI, and SPI. Results of the present study revealed that the average value of temperature, pH, and DO of both study sites were within the WHO guidelines of 23.5 °C, 7.7, and 6.9 mg/L, respectively. The TDS level of site 1 was 192.56 mg/L (within WHO guidelines) and whereas, in site 2 it was found 612.84 mg/L (higher than WHO guidelines), respectively. Calcium hardness of site 1 and site 2 was observed within the range from 25.04 to 65.732 mg/L but, magnesium hardness values were higher than WHO guidelines. The major reason for poor water quality is old, worn-out water supply pipelines and improper waste disposal in the selected areas. The average WQI was found as 59.66 for site 1 and 77.30 for site 2. Results showed that the quality of the water was classified as "poor" for site 1 and "very poor " for site 2. There is a need to address the problem of poor water quality and also raise the public awareness about the quality of drinking water and its associated health impacts., (© 2024. The Author(s).)

The current research focuses on the development of Ag-ZnO heterostructures through a "bottom-up" approach involving the assembly and extraction of Aloe barbadensis Miller gel. These heterostructures composed of metals/semiconductor oxide display distinct and notable optical, electrical, magnetic, and chemical properties that are not found in single constituents and also exhibit photocatalytic applications. These synthesized heterostructures were characterized by XRD, FTIR, SEM, and UV-visible spectroscopy. The high peak intensity of the Ag/ZnO composite shows the high crystallinity. The presence of Ag-O, Zn-O, and O-H bonding is verified using FTIR analysis. SEM analysis indicated the formation of spherical shapes of Ag/ZnO heterostructures. The Zn, O, and Ag elements are further confirmed by EDX analysis. Ag-ZnO heterostructures exhibited excellent photocatalytic activity and stability against the degradation of tubantin red 8BL dye under visible light irradiation., (© 2024. The Author(s).)

Carbon nanotubes (CNTs) possess remarkable properties that make them valuable for various industrial applications. However, concerns have arisen regarding their potential adverse health effects, particularly in occupational settings. The main aim of this research was to examine the effects of short-term exposure to multiwalled carbon nanotube nanoparticles (MWCNT-NPs) on testicular oxidative stress in Swiss albino mice, taking into account various factors such as dosage, duration of exposure, and particle size of MWCNT-NP. In this study, 20 mice were used and placed into six different groups randomly. Four of these groups comprised four repetitions each, while the two groups served as the vehicle control with two repetitions each. The experimental groups received MWCNT-NP treatment, whereas the control group remained untreated. The mice in the experimental groups were exposed to MWCNT-NP for either 7 days or 14 days. Through oral administration, the MWCNT-NP solution was introduced at two distinct dosages: 0.45 and 0.90 μg, whereas the control group was subjected to distilled water rather than the MWCNT-NP solution. The investigation evaluated primary oxidative balance indicators-glutathione (GSH) and glutathione disulfide (GSSG)-in response to MWCNT-NP exposure. Significantly, a noticeable reduction in GSH levels and a concurrent increase in GSSG concentrations were observed in comparison to the control group. To better understand and explore the assessment of the redox status, the Nernst equation was used to calculate the redox potential. Intriguingly, the calculated redox potential exhibited a negative value, signifying an imbalance in the oxidative state in the testes. These findings suggest that short-term exposure to MWCNT-NP can lead to the initiation of testicular oxidative stress and may disrupt the male reproductive system. This is evident from the alterations observed in the levels of GSH and GSSG, as well as the negative redox potential. The research offers significant insights into the reproductive effects of exposure to MWCNTs and emphasizes the necessity of assessing oxidative stress in nanomaterial toxicity studies., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

Physicochemical and phytochemical assessment of leaf mustard (Brassica juncea L.) grown in different agroclimatic conditions is essential to highlight their compositional variability and evaluate the most suitable bunch of agroclimatic and agronomic practices. B. juncea is one of the important leafy vegetables that serve as source of vitamin A and C and iron, and plenty of antioxidants. This in situ research was executed to assess the quality variability of B. juncea grown in different agroecosystems. Leaves' samples of B. juncea were procured from 15 farmers' fields exhibiting different agroclimatic conditions i.e., elevation, nutrient management, temperature, irrigation, and tillage practices. Leaves' samples were subjected to physicochemical and phytochemical analysis, i.e., moisture, pH, TSS, ascorbic acid, carotenoids, phenolics, flavonoids, and antioxidant potential. In the leaves' samples of B. juncea, the target properties were found to vary significantly (P ≤ 0.05) in different agroclimatic conditions. The moisture content, ascorbic acid, phenolic content, carotenoids, and antioxidants were found in the range of 62.7-79.3%, 74-91 mg/100 g, 49.2-49.2 mg GAE/100 g, 436.3-480 mg β carotene/100 g, 32.7-46.67%, respectively. This study elaborates the significant variation of physicochemical and phytochemical attributes of B. juncea due to the prevailing agroclimatic conditions. This necessitates the appropriate choice of B. juncea concerning its composition and ecological conditions of its cultivation in the prospective health benefits., (© 2024. The Author(s).)

Floating treatment wetlands (FTWs) are a sustainable solution to treat polluted water, but their role in chromium (Cr(III)) removal under neutral pH conditions remains poorly understood. This study evaluated the potential of FTWs planted with two perennial emergent macrophytes, Phragmites australis and Iris pseudacorus, to remove Cr(III) and nutrients (N and PO 4 -P) from water containing 7.5 mg/L TN, 1.8 mg/L PO 4 -P, and Cr(III) (500, 1000, and 2000 µg/L). Within 1 h of exposure, up to 96-99% of Cr was removed from the solution, indicating rapid precipitation. After 50 days, Phragmites bound 9-19% of added Cr, while Iris bound 5-22%. Both species accumulated Cr primarily in the roots (BCF > 1). Biomass production and growth development were inhibited in Cr treatments, but microscopic examination of plant roots revealed no histological changes at 500 and 1000 µg/L Cr, suggesting high resistance of the tested species. At 2000 µg/L Cr, both species exhibited disruptions in the arrangement of vessel elements in the stele and increased aerenchyma spaces in Phragmites. At the end of the experiment, 70-86% of TN and 54-90% of PO 4 -P were removed., (© 2023. The Author(s).)

Removal of methyl iodide (CH 3 I) from the air present within nuclear facilities is a critical issue. In case of any nuclear accident, there is a great need to mitigate the radioactive organic iodide immediately as it accumulates in human bodies, causing severe consequences. Current research focuses on removing organic iodides, for which the surface of activated carbon (AC) was modified by impregnating it with different metals individually, i.e. Ag, Ni, Zn, Cu and with the novel combination of these four metals (AZNC). After the impregnation of metals, triethylenediamine (TEDA) was coated on metal impregnated activated carbon (IAC) surface. The adsorption capacity of the combination of four metals IAC was found to be 276 mg/g as the maximum for the trapping of CH 3 I. Whereas TEDA-metal impregnation on ACs enhanced the removal efficiency of CH 3 I up to 352 mg/g. After impregnation, adsorption capacity of AZNC and AZNCT is significantly higher as compared to AC. According to the finding, t 5% of AZNCT IAC is 46 min, which is considerably higher than the t 5% of other tested adsorbents. According to isotherm fitting data, Langmuir isotherm was found superior for describing CH 3 I sorption onto AC and IACs. Kinetics study shows that pseudo second order model represented the sorption of CH 3 I more accurately than the pseudo first order. Thermodynamic studies gave negative value of ΔG which shows that the reaction is spontaneous in nature. Based on the findings, AZNCT IAC appears to have a great potential for air purification applications in order to obtain clean environment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Cadmium (Cd) stress in crops has been serious concern while little is known about the copper oxide nanoparticles (CuO NPs) effects on Cd accumulation by crops. This study investigated the effectiveness of CuO NPs in mitigating Cd contamination in wheat (Triticum aestivum L.) cultivation through a pot experiment, presenting an eco-friendly solution to a critical agricultural concern. The CuO NPs, synthesized using green methods, exhibited a circular shape with a crystalline structure and a particle size ranging from 8 to 12 nm. The foliar spray of CuO NPs was applied in four different concentrations i.e. control, 25, 50, 75, 100 mg/L. The obtained data demonstrated that, in comparison to the control group, CuO NPs had a beneficial influence on various growth metrics and straw and grain yields of T. aestivum. The green CuO NPs improved T. aestivum growth and physiology under Cd stress, enhanced selected enzyme activities, reduced oxidative stress, and decreased malondialdehyde levels in the T. aestivum plants. CuO NPs lowered Cd contents in T. aestivum tissues and boosted the uptake of essential nutrients from the soil. Overall, foliar applied CuO NPs were effective in minimizing Cd contents in grains thereby reducing the health risks associated with Cd excess in humans. However, more in depth studies with several plant species and application methods of CuO NPs are required for better utilization of NPs in agricultural purposes., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

In recent times, significant attention has been directed toward the synthesis and application of nanoparticles (NPs) in agriculture sector. In current study, nanoceria (CeO 2 NPs) synthesized by green method were employed to address cadmium (Cd) accumulation in wheat (Triticum aestivum L.) cultivated in field with excess Cd. The application of CeO 2 NPs was carried out through foliar spraying, performed twice during the growth of T. aestivum. Four levels of CeO 2 NPs were used: T0, T1, T2, and T3 as 0, 50, 75, and 100 mgL -1 , respectively. Results highlighted the positive effects of CeO 2 NPs on various growth parameters, including plant height, spike length, photosynthetic related attributes, as well as straw and grain of grains in comparison to T1 (control group). Furthermore, CeO 2 NPs led to a reduction in oxidative stress in the leaves and enhanced in enzyme activities in comparison to T1. Notably, Cd concentrations in straw, roots, and grains exhibited a decline following the treatment with CeO 2 NPs, in contrast to the control group. In terms of health implications, the calculated health risk index associated with dietary consumption of grains by adults remained below the defined threshold with supply of nanoparticles. Foliar application of CeO 2 NPs proved to be an effective approach in reducing cadmium content in wheat grains. This reduction holds significant potential for minimizing the risk of cadmium exposure to human health through the food chain. Employing the green synthesis method amplifies the potential for extensive production and a wide array of environmental applications for CeO 2 NPs. This dual capacity makes them proficient in tackling environmental stresses while concurrently mitigating adverse ecological effects., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Chromium (Cr) is one of the hazardous heavy metals that is naturally carcinogenic and causes various health problems. Metallic nanoparticles such as silver and copper nanoparticles (Ag NPs and Cu NPs) have gained great attention because of their unique chemical, physical, and biological attributes, serving diverse and significant role in various useful and sustainable applications. In the present study, both of these NPs were synthesized by green method in which Azadirachta indica plant extract was used. These nanoparticles were characterized by using advanced instrumental techniques such as Fourier transmission infrared (FTIR), X-ray diffraction (XRD), scanning electron microscope attached with energy-dispersive spectroscopy (SEM-EDS), and elemental mapping. These environmentally friendly nanoparticles were utilized for the batch removal of Cr from the wastewater. For analysis of adsorption behaviour, a range of kinetic isotherm models (Freundlich, Temkin, Dubinin, and Langmuir) and kinetic models (pseudo-first-order and pseudo-second-order) were used for the Cu-NPs and Ag-NPs. Cu NPs exhibited the highest Cr removal efficiency (96%) within a contact time of 10-15 min, closely followed by Ag NPs which achieved a removal efficiency of 94% under the similar conditions. These optimal outcomes were observed at a sorbent dose of 0.5 g/L for Ag NPs and 0.7 g/L for Cu NPs. After effectively capturing Cr using these nanoparticles, the sorbates were examined through SEM-EDX analysis to observe how much Cr metal was attached to the nanoparticles, potentially for future use. The analysis found that Ag-NPs captured 18% of Cr, while Cu-NPs captured 12% from the aqueous solution. More precise experimental conditions are needed for higher Cr removal from wastewater and determination of the best conditions for industrial-level Cr reuse. Although nanomaterial exhibit high efficiency and selectivity for Cr removal and recovery from wastewater, more research is necessary to optimize their synthesis and performance for industrial-scale applications and develop efficient methods for Cr removal and recovery., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Recently, there has been considerable attention towards the production of environmentally friendly nanoparticles (NPs). In this investigation, the successful synthesis of cerium oxide nanoparticles (CeO 2 NPs) was achieved by employing an eco-friendly technique that utilized an extract from the leaves of local plant quinoa (Chenopodium quinoa L.). The synthesized CeO 2 NPs were subjected to characterization using state-of-the-art methods. The prepared CeO 2 NPs contained a round shape with clusters and have a size of 7-10 nm. To assess how effective CeO 2 NPs derived from C. quinoa were against Ustilago tritici, a fungal disease that negatively affects wheat crop globally, a study was performed on two varieties of wheat crop comprised of Arooj (V1) and Akber (V2), cultivated under field conditions. CeO 2 NPs were applied foliarly twice to the wheat crop at four different concentrations: T0 (0 mg/L), T1 (50 mg/L), T2 (75 mg/L), and T3 (100 mg/L). The results revealed that the control group (T0) exhibited the highest disease severity index (DSI) with a value of 75% compared to the other concentrations of CeO 2 NPs on both varieties. At a concentration of 100 mg/L of CeO 2 NPs, the DSI dropped to a minimum of 35% and 37% on both V1 and V2 respectively. These findings indicated that an increase in the concentration of CeO 2 NPs has a beneficial impact on disease severity. Similar patterns have also been observed with disease incidence (DI), with the greatest efficacy observed at a concentration of 100 mg/L of CeO 2 NPs. Our investigation has shown that CeO 2 NPs exhibitd significant antifungal potential against U. tritici which may be a promising strategy to mitigate fungal disease and crop losses globally., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Water contamination can be detrimental to the human health due to higher concentration of carcinogenic heavy metals such as chromium (Cr) in the wastewater. Many traditional methods are being employed in wastewater treatment plants for Cr removal to control the environmental impacts. Such methods include ion exchange, coagulation, membrane filtration, and chemical precipitation and microbial degradation. Recent advances in materials science and green chemistry have led to the development of nanomaterial that possess high specific surface areas and multiple functions, making them suitable for removing metals such as Cr from wastewater. Literature shows that the most efficient, effective, clean, and long-lasting approach for removing heavy metals from wastewater involves adsorbing heavy metals onto the surface of nanomaterial. This review assesses the removal methods of Cr from wastewater, advantages and disadvantages of using nanomaterial to remove Cr from wastewater and potential negative impacts on human health. The latest trends and developments in Cr removal strategies using nanomaterial adsorption are also explored in the present review., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Inc. All rights reserved.)

Nanoparticles (NPs) are released and dispersed in the environment because of increased manufacturing and use of nano products. NPs disturb the growth of plants depending upon types, exposure duration and plant species. The purpose of this research was to explore the role of gibberellic acid (GA) exposure through foliar route on wheat growth under alone or combined soil application of cerium oxide (CeO 2 ), zinc oxide (ZnO), and titanium dioxide (TiO 2 ) NPs. GA was foliar-applied (200 mg/L) on the wheat plants treated with individual and in all possible combination of the selected NPs. Explorations have revealed that the combination of NPs and GA worked well to enhance the plant growth and selected nutrient status than NPs alone. Furthermore, GA decreased the boosted antioxidant enzyme activities under the combination and individual NPs compared to the alone NPs treated plants, lowered the oxidative stress in wheat plants which provided the additional proof that GA decreased oxidative damage in plants. Combined NPs showed differential effects than individual NPs application irrespective of GA exposure which varied with NPs combination and studied parameters of plants. GA + NPs differentially affected the potassium, phosphorus, iron and manganese concentrations in wheat tissues than NPs alone treatments. Overall, GA can be applied when there is excess of NPs (either alone or in combination) in the growth medium to ensure the growth of crops. However, further studied are needed with other plant species and alone or combined use of different NPs under GA treatment before any final recommendation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Cadmium (Cd) is a common toxic trace element found in agricultural soils which is mainly due to anthropogenic activities. Cadmium posed a significant risk to humans all around the world due to its cancer-causing ability. The current study demonstrated the effects of soil-applied biochar (BC) and foliar-applied titanium dioxide nanoparticles (TiO 2 NPs) (at a rate of 0.5% and 75 mg/L respectively) alone or in combination on growth and Cd accumulation in wheat plants under field experiment. Soil applied BC and foliar TiO 2 NPs, as well as BC coupled with TiO 2 NPs, reduced Cd contents in grains by 32%, 47%, and 79%, than control respectively. The usage of NPs and BC boosted the plant height as well as chlorophyll contents by lowering oxidative injury and changing selected antioxidant enzyme activities in leaves than control plants. The combined use of NPs and BC prevented excess Cd accumulation in grains over the critical level (0.2 mg/kg) for cereals. The health risk index (HRI) due to Cd was reduced by 79% by co-composted BC + TiO 2 NPs treatment than control. Although, HRI was lower than one for all treatments but this may exceed the limit if grains obtained from such field consumed over long periods. In conclusion, TiO 2 NPs and BC amendments can be implemented in fields across the globe where excess Cd is present in soils. Additional studies on the use of such approaches in more precise experimental settings are needed in order to address this environmental problem at larger scale., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

The present study was conducted to evaluate the quality of drinking water and assess the potential health hazards due to water contaminants in selected urban areas of Lahore, Pakistan. Water samples were collected from ten sites and analyzed for different physico-chemical parameters including turbidity, color, pH, total dissolved solids (TDS), nitrates, fluoride, residual chlorine, and total hardness. Additionally, heavy metal (arsenic) and microbial parameters ( E. coli ) were also determined in the water samples. Drinking water quality evaluation indices, including the water quality index (WQI) for physico-chemical and biological parameters and human health risk assessment (HHRA) for heavy metal were estimated using the analytical results of the target parameters. It was found in most of the areas that the levels of arsenic, fluoride, TDS, and residual chlorine were higher than those recommended by the National Environmental Quality Standard (NEQS) and World Health Organization (WHO) guidelines. In addition to the physico-chemical parameters, microbial content ( E. coli ) was also found in the drinking water samples of the selected areas. Statistical analysis of the results indicated that levels of target parameters in drinking water samples are significantly different between sampling sites. The WQI for all physico-chemical and microbial parameters indicated that drinking water in most of the areas was unfit and unsuitable (WQI > 100) for drinking purposes except for the water of Bhatti Gate and Chota Gaon Shahdara with a WQI of 87 and 91, respectively. Drinking water in these areas had a very poor WQI rating. According to HHRA, drinking water from the selected sites was found to be of high risk to children and adults. The carcinogenic risk of arsenic indicated that all samples were of high risk to both adults and children (4.60 and 4.37 × 10 -3 , respectively). Regular monitoring of drinking water quality is essential, and proactive measures must be implemented to ensure the treatment and availability of safe drinking water in urban areas.

Nanoparticles (NPs) preparation using a green as well as environmentally acceptable processes has achieved a lot of attention in recent decade. The current study compared the synthesis of titania (TiO 2 ) nanoparticles synthesized from leaf extracts of two plant species (Trianthema portulacastrum, Chenopodium quinoa) and traditional approach by chemical preparation. The effects of no calcination on the physical characteristics of TiO 2 NPs as well as their antifungal effects were examined and compared with the already reported calcinated TiO 2 NPs. The produced TiO 2 NPs were evaluated using high-tech techniques such as X-ray diffraction (XRD), scanning electron microscope, energy dispersive spectroscopy (EDX), and elemental mapping. TiO 2 NPs prepared by sol-gel technique (T1) and prepared from extractions from leaves of T. portulacastrum (T2), and C. quinoa (T3) were either calcinated or non calcinated and tested against fungal disease (Ustilago tritici) of wheat for antifungal efficacy. The -peak (2θ) at 25.3 was confirmed by XRD to be connected with the anatase (101) form in both cases but before calcination, NPs were lacking the rutile and brookite peaks. The results showed that all types of TiO 2 NPs examined had good antifungal activity against U. tritici, but those made from C. quinoa plant extract have good antifungal activity against disease. TiO 2 NPs which are produced by the green methods (T2, T3) have the highest antifungal activity (58%, 57% respectively), while minimal activity (19%) was recorded when NPs were synthesized using the sol-gel method (T1) with 25 μl/mL. Non calcinated TiO 2 NPs have less antifungal potential than calcined TiO 2 NPs. It can be concluded that calcination may be preferred for efficient antifungal activity when using titania nanoparticles. The green technology may be used on a larger scale with less damaging TiO 2 NP production and can be utilized against fungal disease on wheat crop to reduce crop losses worldwide., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Cadmium (Cd) is among the toxic pollutants that harms the both animals and plants. The natural antioxidant, melatonin can improve Cd-stress tolerance but its potential role in reducing Cd stress and resilience mechanisms in pearl millet (Pennisetum glaucum L.) is remain unclear. The present study suggests that Cd causes severe oxidative damage by decreasing photosynthesis, and increasing reactive oxygen species (ROS), malondialdehyde content (MDA), and Cd content in different parts of pearl millet. However, exogenous melatonin (soil application and foliar treatment) mitigated the Cd toxicity and enhanced the growth, antioxidant defense system, and differentially regulated the expression of antioxidant-responsive genes i. e superoxide dismutase SOD-[Fe] 2, Fe-superoxide dismutase, Peroxiredoxin 2C, and L-ascorbate peroxidase-6. The results showed that foliar melatonin at F-200/50 significantly increased the plant height, chlorophyll a, b, a+b and carotenoids by 128%, 121%, 150%, 122%, and 69% over the Cd treatment, respectively. The soil and foliar melatonin at S-100/50 and F-100/50 reduced the ROS by 36%, and 44%, and MDA by 42% and 51% over the Cd treatment, respectively. Moreover, F200/50 significantly boosted the activities of antioxidant enzymes i. e SOD by 141%, CAT 298%, POD 117%, and APX 155% over the Cd treatment. Similarly, a significant reduction in Cd content in root, stem, and leaf was found on exposure to higher concentrations of exogenous melatonin. These findings suggest that exogenous melatonin may significantly and differentially improve the tolerance to Cd stress in crop plants. However, field applications, type of plant species, concentration of dose, and type of stress may vary with the degree of tolerance in crop plants., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

Conventional methods for quantifying the added iron in wheat flour are time-consuming and costly. A rapid method (Time/Sample: 95 min) was developed by modifying the conventional standard method (Time/Sample: 560 min) and validated. Linearity and linear regression of the rapid method presented excellent correlation coefficient ( R 2 ) values (0.9976 to 0.9991), which were close to 1, while the limits of agreement (LOA) were in the range of -0.01 to 0.06 mg/kg. The limits of detection (LOD)/specificity and limits of quantitation (LOQ)/sensitivity values were found to be 0.03 and 0.09 mg/kg, respectively. The rapid method was subjected to validation, wherein the precision of intra-assay, inter-assay, and inter-person was determined to be within the range of 1.35-7.25%. These results indicate a high level of accuracy and precision of the method. The percent relative standard deviation (RSD) for recoveries at varying spiking levels, that is, 5, 10, and 15 mg/kg, was determined at 1.33 lying far below the upper limit of acceptability (RSD < 20). Overall, the developed rapid method can be sustainably alternate for conventional methods owing to its ability to produce accurate, precise, robust, and reproducible results., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

Nuclear, biological, and chemical warfare (NBC) agents cause an inevitable threat to defense forces and civilians. Exposure to these toxic agents causes a lot of damage to lives. One can avoid the damage of these toxic agents by taking appropriate preventive measures. Respiratory protection is obviously necessary when military personnel or civilians get bounded by such type of noxious situation as contaminant-free air is then required for breathing and it can only be provided by means of a proper gas mask and relevant canister. In purification of contaminated atmospheres, activated carbon has so far met with outstanding success. It removes toxic chemicals either by chemical or physical adsorption from the contaminated air. When any toxic chemicals get adsorbed on the modified impregnated carbon's surface, they usually adsorb there by means of chemical reactions. Destruction of adsorbed toxic substances is expected by such a reactive carbon. In this perspective, an attempt has been made to review the literature from past decades on the removal of toxic chemical warfare agents (CWAs) and radioactive content from air stream in case of any nuclear, biological, and chemical attack by selectively modifying or impregnating the activated carbon surface. This review also covers some important adsorption properties of materials being used in gas mask filters for effective removal of chemicals from airstream. The probable removal mechanisms of various chemical warfare agents and radioactive content have also been reviewed., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

A field study was designed to explore the impacts of foliar-applied chemically and green synthesized titanium dioxide nanoparticles (TiO 2 NPs) on cadmium (Cd) uptake in wheat plants. The wheat was grown in field which was contaminated with Cd and plants were subjected to foliar episodes of TiO 2 NPs during plant growth period. Leaf extracts of two plant species (Trianthema portulacastrum, Chenopodium quinoa) were used for green synthesis while sol-gel method was used for chemical preparation of TiO 2 NPs. Results showed that TiO 2 NPs significantly enhanced the plant height, length of spikes photosynthesis, and straw and grain yield compared to control. TiO 2 NPs minimized the oxidative burst in leaves and improved the enzyme activities than control. Cadmium concentrations of straw, roots and grains decreased after TiO 2 NPs treatments than control. The grain Cd contents were below recommended threshold (0.2 mg Cd /kg grain DW) for cereals upon NPs exposure. The health risk index by the dietary use of grains for adults was below threshold upon NPs exposure. Overall, foliar use of TiO 2 NPs prepared from plant extracts was appropriate in minimizing Cd contents in wheat grains, thereby reducing risk of Cd to human health via food chain., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Nanotechnology is capturing great interest worldwide due to their stirring applications in various fields. Among nanoparticles (NPs), titanium dioxide (TiO 2 ) NPs have been widely used in daily life and can be synthesized through various physical, chemical, and green methods. Green synthesis is a non-toxic, cost-effective, and eco-friendly route for the synthesis of NPs. Plenty of work has been reported on the green, chemical, physical and biological synthesis of TiO 2 NPs and these NPs can be characterized through high tech. instruments. In the present review, dense data have been presented on the comparative synthesis of TiO 2 NPs with different characteristics and their wide range of applications. Among the TiO 2 NPs synthesis techniques, the green methods have been proven to be efficient than chemical synthesis methods because of the less use of precursors, time-effectiveness, and energy-efficiency during the green synthesis procedures. Moreover, this review describes the types of plants (shrubs, herbs and trees), microorganisms (bacteria, fungi and algae), biological derivatives (proteins, peptides, and starches) employed for the synthesis of TiO 2 NPs. The TiO 2 NPs can be effectively used for the treatment of polluted water and positively affected the plant physiology especially under abiotic stresses but the response varied with types, size, shapes, doses, duration of exposure, metal species along with other factors. This review also highlights the regulating features and future standpoints for the measurable enrichment in TiO 2 NPs product and perspectives of TiO 2 NPs reliable application., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

The production of metallic nanoparticles (NPs) by green and ecofriendly methods has received consideration during the recent past. The present study summarized the comparative production of titanium dioxide (TiO 2 ) NPs by plant extracts of Trianthema portulacastrum (T2) and Chenopodium quinoa (T3) and by conventional chemical (sol-gel) method (T1). Synthesized TiO 2 -NPs were examined by high-tech. techniques such as X-Ray Diffraction (XRD), Fourier Transmission Infra-red (FT-IR) spectroscopy, Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray (EDX) spectroscope, SEM-EDS spot analysis and elemental mapping. Synthesized TiO 2 -NPs were applied on wheat rust (Ustilago tritici) for the evaluation of their antifungal activity against toxic plant pathogens. XRD results confirmed the (2θ) peak at 25.3 related to 101 anatase form. EDS-spot analysis and elemental mapping confirms the formation of TiO 2 -NPs by using these techniques. SEM secondary electrons (SEs) images demonstrated the nano range of particles in cluster form with fewer porous structures. The average size of all three TiO 2 -NPs was found less than 15 nm. FT-IR analysis of all three TiO 2 -NPs perfectly matched with the standard parameters. The NPs prepared by both sol-gel and green methods have a good antifungal response against U. tritici, and the green prepared TiO 2 -NPs were found to have the best antifungal activity against wheat rust especially NPs synthesized with the extract of C. quinoa. Overall, green method can be used for the large scale and less toxic synthesis of TiO 2 -NPs because of their wide range of environmental applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

The increasing use of pesticides for boosting the yield of agricultural crops also impart toxic residues which ultimately extend to numerous physiological disorders upon consumption. The present study was designed as an effort to assess the reduction potential of various chemical solutions and to minimize the pesticide residues in cauliflower ( Brassica oleracea var. botrytis ). The samples were soaked in various solutions along with tap water to mitigate pesticide residues. Afterwards, the extracted supernatant was passed through column containing anhydrous sodium sulfate trailed by activated carbon for clean-up. Eluents were first evaporated and then completely dried under gentle stream of Nitrogen. Finally, the residues were determined using gas chromatography equipped with electron capture detector (GC-ECD). Results revealed the highest reduction of endosulfan, bifenthrin and cypermethrin residues with acetic acid (10 %) was 1.133 ± 0.007 (41 %), 0.870 ± 0.022 (60 %) and 0.403 ± 0.003 (75 %), respectively among the tested solutions. However, simple tap water treatment also resulted in 0.990 ± 0.02 (12 %), 1.323 ± 0.015 (14 %) and 1.274 ± 0.002 (21 %) elimination of endosulfan, bifenthrin and cypermethrin residues, respectively. Moreover, among various solutions, acetic acid depicted maximum reduction potential followed by citric acid, hydrogen peroxide, sodium chloride and sodium carbonate solutions. The percent reduction by various solutions ranged from 12 to 41, 14 to 60 and 21 to 75 % for the elimination of endosulfan, bifenthrin and cypermethrin residues, respectively.

The semi-arid tropical (SAT) regions of India are suffering from low productivity which may be further aggravated by anticipated climate change. The present study analyzes the spatial variability of climate change impacts on groundnut yields in the Anantapur district of India and examines the relative contribution of adaptation strategies. For this purpose, a web based decision support tool that integrates crop simulation model and Geographical Information System (GIS) was developed to assist agronomic decision making and this tool can be scalable to any location and crop. The climate change projections of five global climate models (GCMs) relative to the 1980-2010 baseline for Anantapur district indicates an increase in rainfall activity to the tune of 10.6 to 25% during Mid-century period (2040-69) with RCP 8.5. The GCMs also predict warming exceeding 1.4 to 2.4°C by 2069 in the study region. The spatial crop responses to the projected climate indicate a decrease in groundnut yields with four GCMs (MPI-ESM-MR, MIROC5, CCSM4 and HadGEM2-ES) and a contrasting 6.3% increase with the GCM, GFDL-ESM2M. The simulation studies using CROPGRO-Peanut model reveals that groundnut yields can be increased on average by 1.0%, 5.0%, 14.4%, and 20.2%, by adopting adaptation options of heat tolerance, drought tolerant cultivars, supplemental irrigation and a combination of drought tolerance cultivar and supplemental irrigation respectively. The spatial patterns of relative benefits of adaptation options were geographically different and the greatest benefits can be achieved by adopting new cultivars having drought tolerance and with the application of one supplemental irrigation at 60days after sowing., (Copyright © 2015 Elsevier B.V. All rights reserved.)