Search

Summary In this study, we show results from ambient noise tomography around the KTB (Kontinentales Tiefbohrprogramm der Bundesrepublik Deutschland), a continental deep drilling site located at the western edge of the Bohemian Massif, within the Variscan belt of Europe. At the KTB site, crustal rocks have been drilled down to 9 km depth. Before the drilling activity started, several active seismic surveys had been performed to explore its surroundings during the 1980s and early 1990s, in the frame of an extensive exploration of the area aimed at unravelling the characteristics of the continental lower crust that is exposed at surface in this location. Despite the exploration campaigns held at and around the KTB drilling site, there are important targets that are worth further investigation; these are related in particular to the obduction of lower crustal units to the surface, and to the mechanism of orogenic processes in general. Here we present a new 3-D shear wave velocity model of the area from cross-correlations of ambient seismic noise. The model is obtained by a unique data set composed of 2 yr of continuous data recorded at nine 3-component temporary stations (installed from July 2012 to July 2014) located on top and around the drilling site, and together with the data from 19 permanent stations throughout the region. This paper is focusing on the upper crustal layers, and we show velocity variations at short scales that correlate well with known geological structures in the region of the KTB site, at the surface and at depth. These are used to discuss features that are less well-resolved at present.

Digital transformation within local public administration is often conceived as the result of technological advancements, with scarce attention being paid to framing these processes within multi-level organisational settings. Against this background, this article introduces a framework for exploring the different dimensions of digital innovation in the public sector at the urban scale. It proposes conceptual categories that capture digital transformation drivers and mechanisms, encouraging reflections about their capacity to resonate in specific (urban) contexts. After examining frameworks seeking to deconstruct digital transformation in its multiple dimensions, the study proposes a conceptual model and validates it against the result of the literature review. By identifying conceptual categories and their interactions, the study seeks to support a more comprehensive understanding of transformation processes, specifically focusing on public service provision and delivery and their relationship with endogenous and exogenous innovation drivers. At the same time, the study aims to support local public authorities in gaining awareness of their transformative potential and helping them “steer” local digital transformation dynamics.

Detailed 3D elastic crustal models are of fundamental relevance to many applications in Geosciences, from geodynamic modelling, to simulation of seismic wave propagation and seismic engineering. However, most of the recent models suffer from two main drawbacks: (1) they are often obtained from interpolation of local 1D models; and (2) they cannot be easily updated, without recomputing the entire model (which, as a corollary, implies the availability of the complete data-set of raw seismic data). The first drawback leads to mainly oversmoothed models on the horizontal scale, where vertical boundaries are not considered either in the 1D models and in the interpolated 3D model. The second disadvantage implies that current models are generally "static" and their updates require a research effort which is often not paying back in terms of outputs.In this study, we build the framework for an evolutionary elastic model of the Central Apennines. The starting data are represented by a huge data-set of local 1D S-wave velocity models (originally obtained from Receiver Function inversion). We invert such data-set following a Bayesian fusion approach, where the full posterior probability distribution (PPD) of the1D models is exploited to build the 3D elastic model (in absence of the full PPD information, estimators like mean posterior and standard deviation can also be used). The 3D distribution of elastic properties (i.e. a model) is represented by a 3D Voronoi tassellation of the study volume, where the number of 3D Voronoi cells and their positions are unknown. A Markov chain Monte Carlo (McMC) algorithm is used to sample the family of Voronoi models which "fit" the data adequately (here the "data" are the PPD of the 1D models). Our results are shown on a regular 5x5x5 km grid down to 100 km depth, and they are consistent with previous models in terms of difference in crustal structure between the Tyrrhenian and Adriatic side of the Apennines. The model shows which of the features are coherent between adjacent stations, and which areas are better resolved. Point of strength over previous models is the possibility of identifying sub-vertical boundaries, that in a complex region of subduction and neo-formed crust are more likely than a horizontally layered structure. More complementary or additional data (in the form, e.g. of tomographic models or 1D models from dispersion curves) can be easily added to this model, to update it, as new data become available. In fact, new "data" can be either added to the full data-set or can be included modifying the PPD of the 3D Voronoi cells.

Seismic anisotropy is a unique observational tool for remotely studying deformation and stress within the Earth. Effects of anisotropy can be seen in seismic data; they are due to mineral alignment, fractures or layering. Seismic anisotropy is linked to local stress and strain, allowing modern geophysics to derive geomechanical properties from seismic data for supporting well planning and fracking. For unravelling anisotropic properties of the crust, the teleseismic receiver functions methodology has started to be widely applied recently due to its ability in retrieving the three‐dimensional characteristics of the media sampled by the waves. The applicability of this technique is tested here by a field test carried out around the Kontinental Tiefbohrung site in southeastern Germany. We compare our results to previous investigations of the metamorphic rock pile of the Zone Erbendorf‐Vohenstrauss, drilled down to 9 km depth, which sampled an alternating sequence of paragneiss and amphibolite, in which a strong foliation has been produced by ductile deformation. The application of the receiver functions reveals the presence of two distinct anisotropic layers within the metamorphic rock pile at 0–4 km and below 6 km depth, with up to 8% anisotropy; the depth of these two layers corresponds to the location of mica‐rich paragneiss which show intense foliation, and finally proves the relation between the signal in the receiver functions, rock texture and presence of cracks. We have now the capability of providing insights from passive seismic data on geomechanical properties of the rocks, useful for geological exploration and engineering purposes, which will help influencing expensive drilling decisions thanks to future application of this seismic technique.

To constrain seismic anisotropy under and around the Alps in Europe, we study SKS shear-wave splitting from the region densely covered by the AlpArray seismic network. We apply a technique based on measuring the splitting intensity, constraining well both the fast orientation and the splitting delay. 4 years of teleseismic earthquake data were processed automatically (without human intervention), from 724 temporary and permanent broadband stations of the AlpArray deployment including ocean-bottom seismometers. We have obtained an objective image of anisotropic structure in and around the Alpine region, at a spatial resolution that is unprecedented. As in earlier studies, we observe a coherent rotation of fast axes in the western part of the Alpine chain, and a region of homogeneous fast orientation in the central Alps. The spatial variation of splitting delay times is particularly interesting. On one hand, there is a clear positive correlation with Alpine topography, suggesting that part of the seismic anisotropy (deformation) is caused by the Alpine orogeny. On the other hand, anisotropic strength around the mountain chain shows a distinct contrast between western and eastern Alps. This difference is best explained by the more active mantle flow around the Western Alps. We discuss earlier concepts of Alpine geodynamics in the light of these new observational constraints.

In the early years of the 20th century, a base was found at Delos, celebrating the pancratiast and wrestler Menodoros son of Gnaios, together with a marble slab providing thirty-six inscribed wreaths. A reconstruction of the base is provided, combined with an analysis of the text of the inscriptions (I.Délos 1957 and 2498), based on recent studies. The Delian monument, which can be dated to the years 120-110 BC, stands out for the variety of agons it records: in some cases, it is one of the oldest attestations. A brief survey of these particular agons is provided.

In this work we present the application of the Global-Phase Seismic Interferometry (GloPSI) technique to a data-set recorded across the Eastern Alps with the EASI temporary seismic network (Eastern Alpine Seismic Investigation). GloPSI aims at rendering an image of the lithosphere from the waves that travel across the core before reaching the seismic stations (i.e. PKP, PKiKP, PKIKP). The technique is based on the principle that a stack of autocorrelations of transmission responses mimics the reflection response of a medium, and is used here to retrieve information about the crust-mantle boundary, such as its depth and topography. We produce images of the upper lithosphere using 64 teleseismic events. We notice that with GloPSI, we can well image the topography of the Moho in regions, where it shows a nearly planar behaviour (i.e. in the northern part of the profile, from the Bohemian massif to beneath the Northern Calcareous Alps). Below the higher crests of the Alpine chain, and the Tauern Window in particular, we cannot find evidence for a typical boundary between crust and mantle. The GloPSI results indicate the absence of an Adriatic crust made of laterally continuous layers smoothly descending southwards. On the contrary, our results confirm the observations of previous studies suggesting a structurally complex Moho topography and faulted internal Alpine crustal structure.

The Alpine-Dinarides are a complex orogenic system, with its tectonic evolution controlled by the ongoing convergence between Eurasian and African plates with the Adriatic microplate wedged between them. Our study focuses on the upper mantle of the wider Alpine-Dinarides region, and we present surface-wave tomography of two overlapping subregions, interpreting the seismic velocity features in the context of regional geodynamics.In the first part, we use records of 151 teleseismic earthquakes (2010-2018) at 98 stations distributed across the wider Dinarides region. Surface-wave phase velocities are measured in the range of 30 – 160 s by the two-station method at pairs of stations aligned along the great circle paths with the epicenters. We apply several data-quality tests before the dispersion curves are measured. We use Rayleigh waves recorded on both radial and vertical components. Only the dispersions measured coherently at both components are used for the tomography. In total, we reach the number of 9000 phase velocity measurements for the period of 50 s. Tomographic results including resolution estimates are provided for various frequencies; the local dispersion curves are inverted for depths from the surface down to 300 km. Results are shown as maps for various depths and as cross-sections along several profiles of shear-wave velocities in the whole region.The other study focuses on the Alps. The AlpArray seismic network stretches hundreds of kilometers in width and more than thousand kilometers in length. It is distributed over the greater Alpine region (Europe) and consists of around 250 temporary and around 400 permanent broadband stations with interstation distances around 40 km. The earthquakes are selected between years 2016-2019. The methodology differs from the Dinarides case in a sense, that while before we used many earthquakes and less stations pairs (due to sparser station coverage), for the Alps, we use less earthquakes (32) and many more stations pairs (tens of thousands) making use of the dense station coverage of the AlpArray network.Results of the depth inversion of the local dispersion measurements for the Alps are compared with local surface-wave phase-velocity measurement obtained from the (sub)array approach.

The focus of this study is the mantle structure beneath the Apennines, and aims to understanding how deep processes are connected to shallow deformations. We present new observations from a rich receiver function data set from stations located along the North and Central Apennine chain, and use it for comparison and to strengthen the observations of previous seismic tomography images. The two methodologies define a low shear wave velocity zone (decrease of Vs in the order of 5%) and an increase of Vp/Vs (about 3%) in the shallow mantle between 50 and 90 km depth beneath the orogenic belt. The low Vs melt zone is not restricted to the mantle beneath the Quaternary volcanic areas, as previously thought, but is detected under the whole central Apennines suggesting future broad effects on a large scale. Our interpretation of the teleseismic RFs and tomography, reveals consistently a diffuse mantle upwelling beneath the Apennines, and we hypothesize that slab-derived fluids might interact with the sub-lithospheric mantle generating melts that accumulate at the top of the mantle feeding post-collisional extension. This mechanism can be potentially applied to other cases of extension that spread over wide continental regions.

The crustal structure of the Eastern Alps and adjacent tectonic units investigated in this work sheds new light on the relationship of surface geology to geodynamic processes operating at depth. Of particular interest are the nature of a previously proposed Moho gap south and east of the Tauern Window, the plate tectonic affinity of the steeply dipping Eastern Alpine slab, and the relationship of the Alps to the Neogene sedimentary basins and the Bohemian Massif. To address these questions, we use various seismological approaches based on converted waves from the temporary passive experiment EASI (Eastern Alpine Seismic Investigation), a complementary experiment of the AlpArray project. The EASI is a densely spaced, 540 km long seismic network along 13.3°E we operated for more than a year. The uppermost-crustal structures in and near the Alps exhibit dipping layers and/or tilted anisotropy that correlate well with surface geology observations. The Moho, despite its variable appearance, is clearly identified along most of the swath. The Variscan lithospheric blocks beneath the Bohemian Massif are imaged with sub-vertical boundaries. Beneath the Eastern Alps, the shape of the Moho is consistent with bi-vergent orogenic thickening, with a steeper and deeper-reaching Adriatic plate plunging northwards beneath the European plate in the north. At the junction of these plates at depth, around the previously proposed Moho gap, the root of the Eastern Alps is a broad trough characterized by a zone of low velocity-gradient that is up to 20 km thick, transitioning between crust and mantle. Our receiver-function results corroborate earlier lithosphere-upper mantle seismic tomography images, and highlight the Adriatic affinity of the Eastern Alpine slab. The zigzag deployment pattern of stations in the EASI experiment also allows distinction of short-wavelength variations perpendicular to the profile, both within the shallow and the deep crust. This underlines the importance of applying 3D imaging in complex geodynamic systems. ISSN:0040-1951 ISSN:1879-3266

Eastern Austria is a region of low to moderate seismicity, and hence the seismological network coverage is relatively sparse. Nevertheless accurate earthquake location is very important, as the area is one of the most densely populated and most developed areas in Austria. In 2013 a series of earthquakes with magnitudes up to 4.2 was recorded in the Southern Vienna Basin. With portable broadband, semi-permanent, and permanent installed seismic sensors from different institutions it was possible to record the main- and aftershocks with an unusual multitude of close-by seismic stations. In this study we combine records from all available stations up to 240 km distance in one dataset. First, we stabilize the location with three stations deployed in the epicentral area. The higher network density moves the location of smaller magnitude events closer to the main shocks, with respect to preliminary locations achieved by permanent and semi-permanent networks. Then we locate with NonLinLoc using consistent picks, a 3-D velocity model and apply station corrections. This second approach results in stable epicenters, for limited and even changing station availability. This dataset can then be inspected more closely for the presence of regional phases, which then can be used for more accurate localizations and especially depth estimation. Further research will address directivity effects and the asymmetry in earthquake intensity observed throughout the area, using double differences and cross-correlations.

We investigate the crustal seismic structure of the Adria plate using teleseismic receiver functions (RF) recorded at 12 broadband seismic stations in the Apulia region. Detailed models of the Apulian crust, e.g. the structure of the Apulian Multi-layer Platform (AMP), are crucial for assessing the presence of potential decollements at different depth levels that may play a role in the evolution of the Apenninic orogen. We reconstruct S-wave velocity profiles applying a trans-dimensional Monte Carlo method for the inversion of RF data. Using this method, the resolution at the different depth level is completely dictated by the data and we avoid introducing artifacts in the crustal structure. We focus our study on three different key-elements: the Moho depth, the lower crust S-velocity, and the fine-structure of the AMP. We find a well defined and relatively flat Moho discontinuity below the region at 28–32 km depth, possibly indicating that the original Moho is still preserved in the area. The lower crust appears as a generally low velocity layer (average Vs = 3.7 km/s in the 15–26 km depth interval), likely suggestive of a felsic composition, with no significant velocity discontinuities except for its upper and lower boundaries where we find layering. Finally, for the shallow structure, the comparison of RF results with deep well stratigraphic and sonic log data allowed us to constrain the structure of the AMP and the presence of underlying Permo–Triassic (P–T) sediments. We find that the AMP structure displays small-scale heterogeneities in the region, with a thickness of the carbonates layers varying between 4 and 12 km, and is underlain by a thin, discontinuous layer of P–T terrigenous sediments, that are lacking in some areas. This fact may be due to the roughness in the original topography of the continental margins or to heterogeneities in its shallow structure due to the rifting process.

We present the results from receiver function analysis applied to a comprehensive data set in the Eastern Alps. Teleseismic events were recorded at 70 stations with an average deployment of 1 year. The investigated area includes the eastern part of the Eastern Alps and their transition to the Bohemian Massif, the Pannonian domain, and the Southern Alps. The crustal structure at each station is examined with the Zhu-Kanamori (ZK) method, which yields well-resolved interface depths in laterally homogeneous media with limited layering. The application of the ZK technique is challenged because of the complex tectonic setting; therefore, we include additional constraints from recent active-source seismic studies. In particular, the well-known crustal P-wave velocity and, where available, the V p/V s ratio are kept fixed, thus reducing the ambiguity in determining Moho depths. Individual depth values vary strongly between adjacent stations, showing that the employment of the ZK technique in tectonically complex settings is limited. We therefore avoid interpreting the results in detail, but rather compare them to existing crustal models of the Eastern Alps. We regard this receiver function study in the easternmost part of the Alps as a documentation of a data set that has potential to be exploited in the future.

Recordings of teleseismic earthquakes from a dense set of temporary and permanent broadband seismic stations reveal the lithospheric structure of the northern Apennines and support the scenario of a retreating detachment within the mid-crust. Lithospheric delamination appears crucial to the formation and evolution of the Apennines orogen. Receiver-function (RF) stacks outline a continuous west-dipping Ps converted phase from a positive velocity jump that we interpret as the top of the lower crust and mantle of the Adria continental lithosphere, which is descending into the shallow mantle. The correlation of seismicity with two RF profiles across the northern Apennines suggests distinct stages of lithospheric delamination. Active penetration of the detachment into the Adria lithosphere seems evident in the south/east, with induced shallow-mantle flow facilitated by slab dehydration. Penetration of the detachment in the north/west seems to have arrested, and is possibly marked by crustal underplating. This layer atop the Apennines slab is visible only down to 80 km depth and suspends above an oppositely-dipping paired positive/negative Ps converted phase in stacked receiver functions. The break in the west-dipping Adria lithosphere conflicts with a westward-subduction scenario continuous from the Oligocene. Lateral changes of deep structure and seismicity along the northern Apennines suggest that underplating of crustal material and delamination-retreat are distinct mechanisms active today in the western and eastern sectors, respectively, of the northern Apennines. Negative Ps-pulses at 100–120 km depth help to define a seismic lithosphere–asthenosphere boundary (LAB), but cross-cut a volume of high-velocity mantle rock, as inferred from tomographic models. We hypothesize that this seismic LAB is a rheological discontinuity that affects the frequency band of seismic body waves, but not the long-term viscous response that governs the evolution and eventual detachment of the continental slab.

The crustal velocity structure in a region of central Apennines of Italy at the hinge between the highly stretched portion of the Monte Argentario promontory and the magmatic province of the Tolfa Domes Complex (Northern Latium) is discussed in this study. S-wave velocities at depth have been constrained by the modeling of P-wave receiver functions (RF) from both temporary and permanent broadband seismic stations. The computer 3D Vs models show a thin crust (19–25 km) made of a shallow and thin sedimentary cover, a very high velocity and anisotropic layer related to a metamorphic basement, and a low Vs anisotropic layer in the middle-lower crust above a shallow Moho discontinuity modeled at about 20 km depth. The volcano-tectonic evolution of this portion of Tyrrhenian back-arc margin has been strongly influenced by its peculiar crustal architecture. The low-Vs layer acted as a shear zone in the middle-lower crust during the Tyrrhenian extension, also helping the development of Plio-Quaternary magmatism. Our findings potentially give new constraints on the evolution of the area and to the general comprehension of back-arc development in collisional regions.

Mountain chains at the Earthʼs surface result from deformation processes within the Earth. Such deformation processes can be observed by seismic anisotropy, via the preferred alignment of elastically anisotropic minerals. The Alps show complex deformation at the Earthʼs surface. In contrast, we show here that observations of seismic anisotropy suggest a relatively simple pattern of internal deformation. Together with earlier observations from the Western Alps, the SKS shear-wave splitting observations presented here show one of the clearest examples yet of mountain chain-parallel fast orientations worldwide, with a simple pattern nearly parallel to the trend of the mountain chain. In the Eastern Alps, the fast orientations do not connect with neighboring mountain chains, neither the present-day Carpathians, nor the present-day Dinarides. In that region, the lithosphere is thin and the observed anisotropy thus resides within the asthenosphere. The deformation is consistent with the eastward extrusion toward the Pannonian basin that was previously suggested based on seismicity and surface geology.

We compute S-velocity profiles of the crust across the Messina strait (Italy), the tear zone at the southern end of the Ionian subduction zone. Separating Sicily from Calabria, the Messina Strait hosted some of the strongest earthquakes to ever occur in Italy. Here, the motion of the Ionian slab with respect to Sicily creates a complex tectonic setting characterized by lithospheric tearing. We show velocity models of the crust, computed from teleseismic receiver function inversion, outlining the differences between Sicily and Calabria. Strong deformation across the Messina Strait between 10-15 and 30 km depth is expressed by strong anisotropy (up to 10%), developed in a ductile shear zone of the crust. The top of these ductile, weaker layers could limit the depth-extent of future ruptures.

A persistent seismic gap is hypothesized in the Pollino area (southern Italy), at the boundary between the Apennines and the Calabrian arc. Presently, seismic swarms are active in the gap area, creating concerns for possible future large earthquakes. In this study, we model the deep Earth structure across the Pollino range to give new insights on the kinematics and tectonics of this enigmatic area. Migrated receiver function profiles show a subvertical lithospheric discontinuity, delineated by an abrupt change in Moho depth and mantle fabrics across the range. The lithospheric-scale discontinuity bounds the area of earthquake swarm activity and likely decouples the delamination-related extension of the Apennines from the extensional collapse of the Calabrian fore arc. This large-scale discontinuity implies that the normal faults are segmented across the range, limiting the lateral extent of faults where future earthquakes might occur.

article i nfo Article history: Subduction zones are the place in the world where fluids are transported from the foredeep to the mantle and back-to-the-surface in the back-arc. The subduction of an oceanic plate implies the transportation of the oceanic crust to depth and its methamorphization. Oceanic sediments release water in the (relatively) shallower part of the subduction zone, while dehydration of the subducted basaltic crust allows fluid circulation at larger depths. While the water budget in oceanic subduction has been deeply investigated, less attention has been given to the fluids implied in the subduction of a continental margin (i.e. in continental subduction). In this study, we use teleseismic receiver function (RF) analysis to image the process of water migration at depth, from the subducting plate to the mantle wedge, under the Northern Apennines (NAP, Italy). Harmonic decomposition of the RF data-set is used to constrain both isotropic and anisotropic structures. Isotropic structures highlight the subduction of the Adriatic lower crust under the NAP orogens, from 35-40 km to 65 km depth, as a dipping low S-velocity layer. Anisotropic structures indicate the presence of a broad anisotropic zone (anisotropy as high as 7%). This zone develops in the subducted Adriatic lower crust and mantle wedge, between 45 and 65 km depth, directly beneath the orogens and the more recent back-arc extensional basin. The anisotropy is related to the metamorphism of the Adriatic lower crust (gabbro to blueschists) and its consequent eclogitization (blueschists to eclogite). The second metamorphic phase releases water directly in the mantle wedge, hydrating the back-arc upper mantle. The fluid migration process imaged in this study below the northern Apennines could be a proxy for understanding other regions of ongoing continental subduction.

This chapter draws from a pilot project at the Free University of Bozen/Bolzano consisting in using an electronic forum in a political science class. Students were challenged to respond to a ‘prompt’ from the instructor on some topical issues in EU politics and to engage in informed discussion on topics addressed in class. We argue that beyond the content-specific elements involved, the forum was designed to train students in such practices as discussing and debating issues that feature prominently in current EU politics. The forum prescribes a method of discussion and critique and presents itself as a miniature of the democratic ‘public sphere’. This chapter refers to Jurgen Habermas’s seminal studies on the notion of ‘public sphere’ and shows how the EU public sphere is largely shaped by the new electronic media. This chapter bears on Gretchen van Dyke’s chapter on civic education in this volume and connects current issues and challenges in higher education with the ever more relevant problem of the so-called democratic deficit of the EU. It concludes with an analysis of electronic media that draws on Marshall McLuhan’s understanding of the particular status of messages in complex societies.

Geophysical Journal International, 194 (2), ISSN:0956-540X, ISSN:1365-246X

[1] We perform shear-wave splitting measurements to determine seismic anisotropy in the upper mantle under the remote and still not well-understood South Western Pacific Region, more precisely the New Hebrides subduction zone. We obtained 29 good and 35 fair splitting measurements at 8 stations and 93 good and fair Null measurements from the data provided by various networks. According to the splitting parameters, the seismic stations are grouped into “eastern” and “western” stations. Anisotropy of the subducting plate (“western” stations) appears to be the result of absolute plate motion (APM) of the Australian plate. From fast orientations alone, it would be difficult to judge which process is responsible for the anisotropic structure: either the absolute plate motion or trench-parallel “toroidal” flow. Their delay times reveal that these anisotropic parameters can be explained without the presence of the subduction zone, and the APM provides a simple explanation for the observed anisotropy. On the other hand, delay times at “eastern” stations are higher than that of “western” stations. These stations are located close to the subduction zone, and the nearly trench-parallel orientation of fast polarization axes and their higher splitting delay times indicate the presence of subduction zone. Anisotropy at “eastern” stations is apparently due to the additional effect from “toroidal” flow near the subduction zone, which increases the total anisotropy.

[1] We present a new P wave and S wave velocity model for the upper crust beneath Long Valley Caldera obtained using local earthquake tomography and receiver function analysis. We computed the tomographic model using both a graded inversion scheme and a traditional approach. We complement the tomographic Vp model with a teleseismic receiver function model based on data from broadband seismic stations (MLAC and MKV) located on the SE and SW margins of the resurgent dome inside the caldera. The inversions resolve (1) a shallow, high-velocity P wave anomaly associated with the structural uplift of a resurgent dome; (2) an elongated, WNW striking low-velocity anomaly (8%–10 % reduction in Vp) at a depth of 6 km (4 km below mean sea level) beneath the southern section of the resurgent dome; and (3) a broad, low-velocity volume (∼5% reduction in Vp and as much as 40% reduction in Vs) in the depth interval 8–14 km (6–12 km below mean sea level) beneath the central section of the caldera. The two low-velocity volumes partially overlap the geodetically inferred inflation sources that drove uplift of the resurgent dome associated with caldera unrest between 1980 and 2000, and they likely reflect the ascent path for magma or magmatic fluids into the upper crust beneath the caldera.

In complex tectonics regions, seismological, geophysical, and geodynamic modeling require accurate definition of the Moho geometry. Various active and passive seismic experiments performed in the central Mediterranean region revealed local information on the Moho depth, in some cases used to produce interpolated maps. In this paper, we present a new and original map of the 3-D Moho geometry obtained by integrating selected high-quality controlled source seismic and teleseismic receiver function data. The very small cell size makes the retrieved model suitable for detailed regional studies, crustal corrections in teleseismic tomography, advanced 3-D ray tracing in regional earthquake location, and local earthquake tomography. Our results show the geometry of three different Moho interfaces: the European, Adriatic-Ionian, and Tyrrhenian. The three distinct Moho are fashioned following the Alpine and Apennines subduction, collision, and back-arc spreading and show medium- to high-frequency topographic undulations reflecting the complexity of the geodynamic evolution.

[1] Receiver functions (RFs) analyzed at two permanent broadband seismic stations operating in the epicentral area of the Mw 6.3, 2009 L'Aquila earthquake (central Italy) yield insight on crustal structure along the fault rupture. The harmonic decomposition of RFs highlights a subsurface structure in which both isotropic and anisotropic features are present. We model the waveforms using recently developed Monte Carlo methods. The retrieved models display a common depth structure, between 10 and 40 km depth, consistent with the under-thrusting of the Adria lithosphere underneath the Apennines belt. Along the fault, in the uppermost crust, the S wave velocity structure is laterally heterogeneous. Right above the hypocenter, we find a 4–6 km thick, very high S wave velocity body (Vs as high as 4.2 km/s) that is absent in the SE portion of the fault, where the earthquake propagated. The high-Vs body is coincident with the area of fewer aftershocks and is anticorrelated with the maximum slip patches of the earthquake, as modeled by differential interferometric synthetic aperture radar (DInSAR) and strong motion data. We interpret this high-Vs body as a high-strength barrier responsible for the high peak ground motion in the near field, observed in the L'Aquila city and surroundings, and for the complexity in the rupture evolution. The retrieved seismic S wave velocity of this body far exceeds common Vs values in the upper crust and it is more compatible with values observed in mafic basement rocks.

[1] Isotropic and anisotropic seismic structures across the Northern Apennines (Italy) subduction zone are imaged using a new method for the analysis of teleseismic receiver functions (RFs). More than 13,000 P-wave coda of teleseismic records from the 2003–2007 Retreating-Trench, Extension, and Accretion Tectonics (RETREAT) experiment are used to provide new insights into a peculiar subduction zone between two continental plates that is considered a focal point of Mediterranean evolution. A new methodology for the analysis of receiver functions is developed, which combines both migration and harmonic decomposition of the receiver function data set. The migration technique follows a classical “Common Conversion Point” scheme and helps to focus on a crucial depth range (20–70 km) where the mantle wedge develops. Harmonic decomposition of a receiver function data set is a novel and less explored approach to the analysis of P-to-S converted phases. The separation of the back-azimuth harmonics is achieved through a numerical regression of the stacked radial and transverse receiver functions from which we obtain independent constraints on both isotropic and anisotropic seismic structures. The application of our method to the RETREAT data set succeeds both in confirming previous knowledge about seismic structure in the area and in highlighting new structures beneath the Northern Apennines chain, where previous studies failed to clearly retrieve the geometry of the subducted interfaces. We present our results in closely spaced profiles across and along the Northern Apennines chain to highlight the convergence of the Tyrrhenian and the Adriatic microplates which differ in their crustal structure where the Adriatic microplate subducts beneath Tuscany and the Tyrrhenian sea. A signature of the dipping Adriatic Moho is clearly observed beneath the Tyrrhenian Moho in a large portion of the forearc region. In the area where the two Mohos overlap, our new analysis reveals the presence of an anisotropic body above the subducted Moho. There is a strong Ps converted phase with anisotropic characteristics from the top of the Adriatic plate to a depth of at least 80 km. Because the Ps conversion occurs much deeper than similar Ps phases in Cascadia and Japan, dehydration of oceanic crust seems unlikely as a causative factor. Rather, the existence of this body trapped between the two interfaces supports the hypothesis of lower crustal delamination in a postsubduction tectonic setting.

A Mw 6.3 earthquake struck on April 6, 2009 the Abruzzi region (central Italy) producing vast damage in the L'Aquila town and surroundings. In this paper we present the location and geometry of the fault system as obtained by the analysis of main shock and aftershocks recorded by permanent and temporary networks. The distribution of aftershocks, 712 selected events with ML > 2.3 and 20 with ML > 4.0, defines a complex, 40 km long, NW trending extensional structure. The main shock fault segment extends for 15 -18 km and dips at 45° to the SW, between 10 and 2 km depth. The extent of aftershocks coincides with the surface trace of the Paganica fault, a poorly known normal fault that, after the event, has been quoted to accommodate the extension of the area. We observe a migration of seismicity to the north on an echelon fault that can rupture in future large earthquakes. Copyright 2009 by the American Geophysical Union.

[1] The Colli Albani is a Quaternary quiescent volcano, located a few kilometers southeast of Rome (Italy). During the past decade, seismic swarms, ground deformation, and gas emissions occurred in the southwestern part of the volcano, where the last phreatomagmatic eruptions (27 ka) developed, building up several coalescent craters. In the frame of a Dipartimento Protezione Civile–Istituto Nazionale di Geofisica e Vulcanologica project aimed at the definition and mitigation of volcanic hazard, a temporary array of seismic stations has been deployed on the volcano and surrounding areas. We present results obtained using receiver functions analysis for eight stations, located upon and around the volcanic edifice, and revealing how the built of the volcanic edifice influenced the prevolcanic structures. The stations show some common features: the Moho is almost flat and located at 23 km, in agreement with the thinning of the Thyrrenian crust. Also the presence of a shallow limestone layer is a stable feature under every station, with a variable thickness between 4 and 5 km. However, some features change from station to station, indicating a local complexity of the crustal structure: a shallow discontinuity dividing the Plio-Pleistocene sediments by the Meso-Cenozoic limestones, and a localized anisotropic layer, in the central part of the old structure, which points of the deformation of the limestones. Other two strongly anisotropic layers are detected under the stations in lower crust and upper mantle, with symmetry axis directions related to the evolution of the volcano complex.

Dopaminergic agonists have been usually used as adjunctive therapy for the cure of Parkinson’s disease (PD). It is generally believed that treatment with these drugs is symptomatic rather then curative and does not stop or delay the progression of neuronal degeneration. However, several DA agonists of the DA D2–receptor family (including D2, D3 and D4-subtypes) have recently been shown to possess neuroprotective properties in different in vitro and in vivo experimental PD models. Here we summarize some recent data from our and other groups underlining the wide pharmacological spectrum of DA agonists currently used for treating PD patients. In particular, the mechanism of action of different DA agonists does not appear to be restricted to the stimulation of selective DA receptor subtypes being these drugs endowed with intrinsic, independent, and peculiar antioxidant effects. This activity may represent an additional pharmacological property contributing to their clinical efficacy in PD.

Here we demonstrate that pramipexole, an antiparkinsonian dopamine receptor agonist drug, exerts neuroprotective effects against beta-amyloid neurotoxicity. Using a specific protocol to test individually oligomers, fibrils, or unaggregated amyloid beta-peptide, we found pramipexole able to protect cells against oligomers and fibrils. Unaggregated amyloid beta-peptide was found unable to cause cell death. Fibrils and oligomers were also found to produce elevated amount of free radicals, and this effect was prevented by pramipexole. We propose pramipexole may become in the future a coadjuvant in the treatment of neuropathologies, besides Parkinson's disease, where amyloid beta-peptide-mediated oxidative injury exerts a relevant role.

Background/Aims: To our knowledge, a suitable animal model to investigate how atypical antipsychotics may induce diabetes in patients has not received much attention. Methods: We investigated the effects of acute as well as subchronic administration of clozapine on food intake, body weight gain, glucose tolerance and insulin secretion in response to glucose in Sprague-Dawley rats. We then evaluated the effects of clozapine on corticosterone secretion and 11β-hydroxysteroid dehydrogenase type 1 (11β-HSD-1) and phosphoenolpyruvate carboxykinase (PEPCK) expression in the liver. We investigated the in vitro effects of clozapine on glucose uptake and development of differentiated myotubes in skeletal muscle cell (C2C12) cultures. Results: Clozapine administration caused hyperglycemia (p < 0.05) in female rats. In male rats, the increase of plasma glucose levels after clozapine injection was not statistically significant. The increase of plasma insulin concentrations and the intraperitoneal glucose tolerance test results proved that clozapine reduced insulin sensitivity in female rats. These endocrine and metabolic effects of clozapine were not related to changes in feeding behavior of fat accumulation. We observed a stimulatory effect of clozapine on corticosterone (p < 0.01) secretion in both female and male rats. Chronic clozapine administration upregulated PEPCK and 11β-HSD-1 expression in rat liver. Clozapine did not inhibit basal and insulin-induced glucose transport in murine myotubes but it was able to antagonize the stimulatory effect of α-methyl-5-hydroxytryptamine on glucose uptake. Conclusion: Clozapine induces sex-related alterations of glucose homeostasis and insulin sensitivity in rodents. We discussed the possible contribution of clozapine-induced activation of HPA and clozapine antagonistic activity at peripheral 5-HT2A receptors to the observed metabolic alterations.

not Available.

We analyze seismic anisotropy for the Eastern Alpine region by inspecting shear-wave splitting from SKS and SKKS phases. The Eastern Alpine region is characterized by a breakdown of the clear mountain-chain-parallel fast orientation pattern that has been previously documented for the Western Alps and for the western part of the Eastern Alps. The main interest of this paper is a more detailed analysis of the anisotropic character of the Eastern Alps, and the transition to the Carpathian–Pannonian region. SK(K)S splitting measurements reveal a rather remarkable lateral change in the anisotropy pattern from the west to the east of the Eastern Alps with a transition area at about 12°E. We also model the backazimuthal variation of the measurements by a vertical change of anisotropy. We find that the eastern part of the study area is characterized by the presence of two layers of anisotropy, where the deeper layer has characteristics similar to those of the Central Alps, in particular SW–NE fast orientations of anisotropic axes. We attribute the deeper layer to a detached slab from the European plate. Comparison with tomographic studies of the area indicates that the detached slab might possibly connect with the lithosphere that is still in place to the west of our study area, and may also connect with the slab graveyard to the East, at the depth of the upper mantle transition zone. On the other hand, the upper layer has NW–SE fast orientations coinciding with a low-velocity layer which is found above a more-or-less eastward dipping high-velocity body. The anisotropy of the upper layer shows large-scale NW–SE fast orientation, which is consistent with the presence of asthenospheric flow above the detached slab foundering into the deeper mantle., Highlights • Upper mantle anisotropy under the Eastern Alps is constrained by SKS splitting analysis. • Individual measurements show a remarkable lateral change of anisotropy. • We find two anisotropic layers by modeling backazimuthal variation of measurements. • The results suggest a detached slab as the deeper layer with NE–SW fast orientation. • The upper layer is attributed to asthenospheric flow with NW–SE orientation.