Search

Transiting planets in multiple-star systems, especially high-order multiples, make up a small fraction of the known planet population but provide unique opportunities to study the environments in which planets would have formed. Planet-hosting binaries have been shown to have an abundance of systems in which the stellar orbit aligns with the orbit of the transiting planet, which could give insights into the planet formation process in such systems. We investigate here if this trend of alignment extends to planet-hosting triple-star systems. We present long-term astrometric monitoring of a novel sample of triple-star systems that host Kepler transiting planets. We measured orbit arcs in 21 systems, including 12 newly identified triples, from a homogeneous analysis of our Keck adaptive optics data and, for some systems, Gaia astrometry. We examine the orbital alignment within the nine most compact systems ($\lesssim500$ au), testing if either (or both) of the stellar orbits align with the edge-on orbits of their transiting planets. Our statistical sample of triple systems shows a tendency toward alignment, especially when assessing the alignment probability using stellar orbital inclinations computed from full orbital fits, but is formally consistent with isotropic orbits. Two-population tests where half of the stellar orbits are described by a planet-hosting-binary-like moderately aligned distribution give the best match when the other half (non-planet-hosting) has a Kozai-like misaligned distribution. Overall, our results suggest that our sample of triple-star planet-hosting systems are not fully coplanar systems and have at most one plane of alignment., Comment: Accepted to MNRAS

The Planet Formation Imager (PFI) Project is dedicated to defining a next-generation facility that can answer fundamental questions about how planets form, including detection of young giant exoplanets and their circumplanetary disks. The proposed expansive design for a 12-element array of 8m class telescopes with >1.2 km baselines would indeed revolutionize our understanding of planet formation and is technically achievable, albeit at a high cost. It has been 10 years since this conceptual design process began and we give an overview of the status of the PFI project. We also review how a scaled back PFI with fewer large telescopes could answer a range of compelling science questions, including in planet formation and as well as totally different astrophysics areas. New opportunities make a space-based PFI more feasible now and we give a brief overview of new efforts that could also pave the way for the Large Interferometer For Exoplanets (LIFE) space mission., Comment: submitted to SPIE 2024 (Yokohama). arXiv admin note: substantial text overlap with arXiv:1807.11555

To leverage the angular resolution of interferometry at high contrast, one must employ specialized beam-combiners called interferometric nullers. Nullers discard part of the astrophysical information to optimize the recording of light present in the dark fringe of the central source. Asgard/NOTT will deploy a beam-combination scheme offering good instrumental noise rejection when phased appropriately, but for which information is degenerate on the outputs, prompting a dedicated tuning strategy using the science detector. The dispersive effect of water vapor can be corrected with prisms forming a variable thickness of glass. But observations in the L band suffer from an additional and important chromatic effect due to longitudinal atmospheric dispersion coming from a resonance of CO2 at 4.3 micron. To compensate for this effect efficiently, a novel type of compensation device will be deployed leveraging a gas cell of variable length at ambient pressure. After reviewing the impact of water vapor and CO2, we present the design of this atmospheric dispersion compensation device and describe a strategy to maintain this tuning on-sky., Comment: 7 pages, 5 figures, Proc of SPIE Astronomical Telescopes + Instrumentation 2024 Yokohama, Japan, Optical and Infrared Interferometry and Imaging VI

With high equilibrium temperatures and tidally locked rotation, ultra-hot Jupiters (UHJs) are unique laboratories within which to probe extreme atmospheric physics and chemistry. In this paper, we present high-resolution dayside spectroscopy of the UHJ WASP-189b obtained with the new Gemini High-resolution Optical SpecTrograph (GHOST) at the Gemini South Observatory. The observations, which cover three hours of post-eclipse orbital phases, were obtained during the instrument's System Verification run. We detect the planet's atmosphere via the Doppler cross-correlation technique, and recover a detection of neutral iron in the planet's dayside atmosphere at a significance of 7.5$\sigma$ in the red-arm of the data, verifying the presence of a thermal inversion. We also investigate the presence of other species in the atmosphere and discuss the implications of model injection/recovery tests. These results represent the first atmospheric characterization of an exoplanet with GHOST's high-resolution mode, and demonstrate the potential of this new instrument in detecting and studying ultra-hot exoplanet atmospheres., Comment: 21 pages, 12 figures, 3 tables. Accepted for publication in The Astronomical Journal

ESO's Very Large Telescope Interferometer has a history of record-breaking discoveries in astrophysics and significant advances in instrumentation. The next leap forward is its new visitor instrument, called Asgard. It comprises four natively collaborating instruments: HEIMDALLR, an instrument performing both fringe tracking and stellar interferometry simultaneously with the same optics, operating in the K band; Baldr, a Strehl optimizer in the H band; BIFROST, a spectroscopic combiner to study the formation processes and properties of stellar and planetary systems in the Y-J-H bands; and NOTT, a nulling interferometer dedicated to imaging nearby young planetary systems in the L band. The suite is in its integration phase in Europe and should be shipped to Paranal in 2025. In this article, we present details of the alignment and calibration unit, the observing modes, the integration plan, the software architecture, and the roadmap to completion of the project.

NOTT (formerly Hi-5) is the L'-band (3.5-4.0~microns) nulling interferometer of Asgard, an instrument suite in preparation for the VLTI visitor focus. The primary scientific objectives of NOTT include characterizing (i) young planetary systems near the snow line, a critical region for giant planet formation, and (ii) nearby main-sequence stars close to the habitable zone, with a focus on detecting exozodiacal dust that could obscure Earth-like planets. In 2023-2024, the final warm optics have been procured and assembled in a new laboratory at KU Leuven. First fringes and null measurements were obtained using a Gallium Lanthanum Sulfide (GLS) photonic chip that was also tested at cryogenic temperatures. In this paper, we present an overall update of the NOTT project with a particular focus on the cold mechanical design, the first results in the laboratory with the final NOTT warm optics, and the ongoing Asgard integration activities. We also report on other ongoing activities such as the characterization of the photonic chip (GLS, LiNbO3, SiO), the development of the exoplanet science case, the design of the dispersion control module, and the progress with the self-calibration data reduction software., Comment: 11 pages (incl. 5 figures); Proc. SPIE Astronomical Telescopes + Instrumentation 2024 (Yokohama; Japan), Optical and Infrared Interferometry and Imaging VI

The Asgard instrument suite proposed for the ESO's Very Large Telescope Interferometer (VLTI) brings with it a new generation of instruments for spectroscopy and nulling. Asgard will enable investigations such as measurement of direct stellar masses for Galactic archaeology and direct detection of giant exoplanets to probe formation models using the first nulling interferometer in the southern hemisphere. We present the design and implementation of the Astralis-built Heimdallr, the beam combiner for fringe tracking and stellar interferometry in K band, as well as Solarstein, a novel implementation of a 4-beam telescope simulator for alignment and calibration. In this update, we verify that the Heimdallr design is sufficient to perform diffraction-limited beam combination. Furthermore, we demonstrate that Solarstein presents an interface comparable to the VLTI with co-phased, equal intensity beams, enabling alignment and calibration for all Asgard instruments. In doing so, we share techniques for aligning and implementing large instruments in bulk optics., Comment: Presented at SPIE Astronomical Telescopes + Instrumentation 2024

Small planets ($R_{p} \leq 4 R_{\oplus}$) are divided into rocky super-Earths and gaseous sub-Neptunes separated by a radius gap, but the mechanisms that produce these distinct planet populations remain unclear. Binary stars are the only main-sequence systems with an observable record of the protoplanetary disk lifetime and mass reservoir, and the demographics of planets in binaries may provide insights into planet formation and evolution. To investigate the radius distribution of planets in binary star systems, we observed 207 binary systems hosting 283 confirmed and candidate transiting planets detected by the Kepler mission, then recharacterized the planets while accounting for the observational biases introduced by the secondary star. We found that the population of planets in close binaries ($\rho \leq 100$ au) is significantly different from the planet population in wider binaries ($\rho > 300$ au) or single stars. In contrast to planets around single stars, planets in close binaries appear to have a unimodal radius distribution with a peak near the expected super-Earth peak of $R_{p} \sim 1.3 R_{\oplus}$ and a suppressed population of sub-Neptunes. We conclude that we are observing the direct impact of a reduced disk lifetime, smaller mass reservoir, and possible altered distribution of solids reducing the sub-Neptune formation efficiency. Our results demonstrate the power of binary stars as a laboratory for exploring planet formation and as a controlled experiment of the impact of varied initial conditions on mature planet populations., Comment: 19 pages, 9 figures, 6 tables. Accepted to AJ. Full tables available upon request to the first author prior to publication

The $\beta$ Pictoris system is the closest known stellar system with directly detected gas giant planets, an edge-on circumstellar disc, and evidence of falling sublimating bodies and transiting exocomets. The inner planet, $\beta$ Pictoris c, has also been indirectly detected with radial velocity (RV) measurements. The star is a known $\delta$ Scuti pulsator, and the long-term stability of these pulsations opens up the possibility of indirectly detecting the gas giant planets through time delays of the pulsations due to a varying light travel time. We search for phase shifts in the $\delta$ Scuti pulsations consistent with the known planets $\beta$ Pictoris b and c and carry out an analysis of the stellar pulsations of $\beta$ Pictoris over a multi-year timescale. We used photometric data collected by the BRITE-Constellation, bRing, ASTEP, and TESS to derive a list of the strongest and most significant $\delta$ Scuti pulsations. We carried out an analysis with the open-source python package maelstrom to study the stability of the pulsation modes of $\beta$ Pictoris in order to determine the long-term trends in the observed pulsations. We did not detect the expected signal for $\beta$ Pictoris b or $\beta$ Pictoris c. The expected time delay is 6 seconds for $\beta$ Pictoris c and 24 seconds for $\beta$ Pictoris b. With simulations, we determined that the photometric noise in all the combined data sets cannot reach the sensitivity needed to detect the expected timing drifts. An analysis of the pulsational modes of $\beta$ Pictoris using maelstrom showed that the modes themselves drift on the timescale of a year, fundamentally limiting our ability to detect exoplanets around $\beta$ Pictoris via pulsation timing., Comment: 16 pages, 16 figures, 4 tables, accepted for publication in A&A

High angular resolution imaging is an increasingly important capability in contemporary astrophysics. Of particular relevance to emerging fields such as the characterisation of exoplanetary systems, imaging at the required spatial scales and contrast levels results in forbidding challenges in the correction of atmospheric phase errors, which in turn drives demanding requirements for precise wavefront sensing. Asgard is the next-generation instrument suite at the European Southern Observatory's Very Large Telescope Interferometer (VLTI), targeting advances in sensitivity, spectral resolution and nulling interferometry. In this paper, we describe the requirements and designs of three core modules: Heimdallr, a beam combiner for fringe tracking, low order wavefront correction and visibility science; Baldr, a Zernike wavefront sensor to correct high order atmospheric aberrations; and Solarstein, an alignment and calibration unit. In addition, we draw generalisable insights for designing such system and discuss integration plans., Comment: 16 pages, 10 figures. Part of the special issue "Optics and Photonics in Sydney"

Detailed chemical studies of F/G/K -- or Solar-type -- stars have long been routine in stellar astrophysics, enabling studies in both Galactic chemodynamics, and exoplanet demographics. However, similar understanding of the chemistry of M and late-K dwarfs -- the most common stars in the Galaxy -- has been greatly hampered both observationally and theoretically by the complex molecular chemistry of their atmospheres. Here we present a new implementation of the data-driven \textit{Cannon} model, modelling $T_{\rm eff}$, $\log g$, [Fe/H], and [Ti/Fe] trained on low-medium resolution optical spectra ($4\,000-7\,000\,$\SI{}{\angstrom}) from 103 cool dwarf benchmarks. Alongside this, we also investigate the sensitivity of optical wavelengths to various atomic and molecular species using both data-driven and theoretical means via a custom grid of MARCS synthetic spectra, and make recommendations for where MARCS struggles to reproduce cool dwarf fluxes. Under leave-one-out cross-validation, our \textit{Cannon} model is capable of recovering $T_{\rm eff}$, $\log g$, [Fe/H], and [Ti/Fe] with precisions of 1.4\%, $\pm0.04\,$dex, $\pm0.10\,$dex, and $\pm0.06\,$dex respectively, with the recovery of [Ti/Fe] pointing to the as-yet mostly untapped potential of exploiting the abundant -- but complex -- chemical information within optical spectra of cool stars., Comment: 24 pages, 14 figures, 4 tables. Accepted for publication in MNRAS

Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L-band (3.5 to 4.0)$\mu$m, where the contrast between exoplanets and their host stars is advantageous. The breakthrough is the use of a photonic beam combiner, which only recently allowed the required theoretical raw contrast of $10^{-3}$ in this spectral range. Nulling interferometry observations of exoplanets also require a high degree of balancing between the four pupils of the VLTI in terms of intensity, phase, and polarization. The injection into the beam combiner and the requirements of nulling interferometry are driving the design of the warm optics and the injection system. The optical design up to the beam combiner is presented. It offers a technical solution to efficiently couple the light from the VLTI into the beam combiner. During the coupling, the objective is to limit throughput losses to 5% of the best expected efficiency for the injection. To achieve this, a list of different loss sources is considered with their respective impact on the injection efficiency. Solutions are also proposed to meet the requirements on beam balancing for intensity, phase, and polarization. The different properties of the design are listed, including the optics used, their alignment and tolerances, and their impact on the instrumental performances in terms of throughput and null depth. The performance evaluation gives an expected throughput loss of less than <6.4% of the best efficiency for the injection and a null depth of $\sim2.10^{-3}$, mainly from optical path delay errors outside the scope of this work., Comment: Accepted for publication in JATIS. 23 pages, 11 figures, 8 tables

We present new spatially resolved astrometry and photometry of the CD-27 11535 system, a member of the $\beta$ Pictoris moving group consisting of two resolved K-type stars on a $\sim$20-year orbit. We fit an orbit to relative astrometry measured from NIRC2, GPI, and archival NaCo images, in addition to literature measurements. However, the total mass inferred from this orbit is significantly discrepant from that inferred from stellar evolutionary models using the luminosity of the two stars. We explore two hypotheses that could explain this discrepant mass sum; a discrepant parallax measurement from Gaia due to variability, and the presence of an additional unresolved companion to one of the two components. We find that the $\sim$20-year orbit could not bias the parallax measurement, but that variability of the components could produce a large amplitude astrometric motion, an effect which cannot be quantified exactly without the individual Gaia measurements. The discrepancy could also be explained by an additional star in the system. We jointly fit the astrometric and photometric measurements of the system to test different binary and triple architectures for the system. Depending on the set of evolutionary models used, we find an improved goodness of fit for a triple system architecture that includes a low-mass ($M=0.177\pm0.055$\,$M_{\odot}$) companion to the primary star. Further studies of this system will be required in order to resolve this discrepancy, either by refining the parallax measurement with a more complex treatment of variability-induced astrometric motion, or by detecting a third companion., Comment: 12 pages + references and appendix, 12 figures, 5 tables

Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms., Comment: 191 pages, 47 figures. This is the version of the article before peer review or editing, as submitted by an author to J. Phys. Photonics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://iopscience.iop.org/article/10.1088/2515-7647/ace869/meta

We report on the chemo-dynamical analysis of SPLUS J142445.34-254247.1, an extremely metal-poor halo star enhanced in elements formed by the rapid neutron-capture process. This star was first selected as a metal-poor candidate from its narrow-band S-PLUS photometry and followed up spectroscopically in medium-resolution with Gemini South/GMOS, which confirmed its low-metallicity status. High-resolution spectroscopy was gathered with GHOST at Gemini South, allowing for the determination of chemical abundances for 36 elements, from carbon to thorium. At [Fe/H]=-3.39, SPLUS J1424-2542 is one of the lowest metallicity stars with measured Th and has the highest logeps(Th/Eu) observed to date, making it part of the "actinide-boost" category of r-process enhanced stars. The analysis presented here suggests that the gas cloud from which SPLUS J1424-2542 was formed must have been enriched by at least two progenitor populations. The light-element (Z<=30) abundance pattern is consistent with the yields from a supernova explosion of metal-free stars with 11.3-13.4 Msun, and the heavy-element (Z>=38) abundance pattern can be reproduced by the yields from a neutron star merger (1.66Msun and 1.27Msun) event. A kinematical analysis also reveals that SPLUS J1424-2542 is a low-mass, old halo star with a likely in-situ origin, not associated with any known early merger events in the Milky Way., Comment: 26 pages, 11 figures, accepted for publication on ApJ

Pristine_183.6849+04.8619 (P1836849) is an extremely metal-poor ([Fe/H]$=-3.3\pm0.1$) star on a prograde orbit confined to the Galactic disk. Such stars are rare and may have their origins in protogalactic fragments that formed the early Milky Way, in low mass satellites accreted later, or forming in situ in the Galactic plane. Here we present a chemo-dynamical analysis of the spectral features between $3700-11000$\r{A} from a high-resolution spectrum taken during Science Verification of the new Gemini High-resolution Optical SpecTrograph (GHOST). Spectral features for many chemical elements are analysed (Mg, Al, Si, Ca, Sc, Ti, Cr, Mn, Fe, Ni), and valuable upper limits are determined for others (C, Na, Sr, Ba). This main sequence star exhibits several rare chemical signatures, including (i) extremely low metallicity for a star in the Galactic disk, (ii) very low abundances of the light $\alpha$-elements (Na, Mg, Si) compared to other metal-poor stars, and (iii) unusually large abundances of Cr and Mn, where [Cr, Mn/Fe]$_{\rm NLTE}>+0.5$. A comparison to theoretical yields from supernova models suggests that two low mass Population III objects (one 10 M$_\odot$ supernova and one 17 M$_\odot$ hypernova) can reproduce the abundance pattern well (reduced $\chi^2<1$). When this star is compared to other extremely metal-poor stars on quasi-circular, prograde planar orbits, differences in both chemistry and kinematics imply there is little evidence for a common origin. The unique chemistry of P1836849 is discussed in terms of the earliest stages in the formation of the Milky Way., Comment: 16 pages, 10 figures, 6 tables. Accepted by MNRAS November 22; Revisions include comparisons to more EMP stars, results unchanged

In the past few years, there has been a resurgence in studies towards space-based optical/infrared interferometry, particularly with the vision to use the technique to discover and characterise temperate Earth-like exoplanets around solar analogues. One of the key technological leaps needed to make such a mission feasible is demonstrating that formation flying precision at the level needed for interferometry is possible. Here, we present $\textit{Pyxis}$, a ground-based demonstrator for a future small satellite mission with the aim to demonstrate the precision metrology needed for space-based interferometry. We describe the science potential of such a ground-based instrument, and detail the various subsystems: three six-axis robots, a multi-stage metrology system, an integrated optics beam combiner and the control systems required for the necessary precision and stability. We end by looking towards the next stage of $\textit{Pyxis}$: a collection of small satellites in Earth orbit., Comment: 31 Pages, 15 Figures, accepted to JATIS

The Gemini High-resolution Optical SpecTrograph (GHOST) is the newest high resolution spectrograph to be developed for a large aperture telescope, recently deployed and commissioned at the Gemini-South telescope. In this paper, we present the first science results from the GHOST spectrograph taking during its commissioning runs. We have observed the bright metal-poor benchmark star HD 122563, along with two stars in the ultra faint dwarf galaxy, Ret II, one of which was previously identified as a candidate member, but did not have a previous detailed chemical abundance analysis. This star (GDR3 0928) is found to be a bona fide member of Ret II, and from a spectral synthesis analysis, it is also revealed to be a CEMP-r star, with significant enhancements in the several light elements (C, N, O, Na, Mg, and Si), in addition to featuring an r-process enhancement like many other Ret II stars. The light-element enhancements in this star resemble the abundance patterns seen in the CEMP-no stars of other ultra faint dwarf galaxies, and are thought to have been produced by an independent source from the r-process. These unusual abundance patterns are thought to be produced by faint supernovae, which may be produced by some of the earliest generations of stars., Comment: 23 pages, 9 figures, 7 tables, submitted to the AAS Journals

Context: The conventional approach to direct imaging has been the use of a single aperture coronagraph with wavefront correction via extreme adaptive optics. Such systems are limited to observing beyond an inner working (IWA) of a few $\mathit\lambda/D$. Nulling interferometry with two or more apertures will enable detections of companions at separations at and beyond the formal diffraction limit. Aims: This paper evaluates the astrophysical potential of a kernel-nuller as the prime high-contrast imaging mode of the Very Large Telescope Interferometer (VLTI). Methods: By taking into account baseline projection effects which are induced by Earth rotation, we introduce some diversity in the response of the nuller as a function of time. This response is depicted by transmission maps. We also determine whether we can extract the astrometric parameters of a companion from the kernel outputs, which are the primary intended observable quantities of the kernel-nuller. This then leads us to comment on the characteristics of a possible observing program for the discovery of exoplanets. Results: We present transmission maps for both the raw nuller outputs and their subsequent kernel outputs. To further examine the properties of the kernel-nuller, we introduce maps of the absolute value of the kernel output. We also identify 38 targets for the direct detection of exoplanets with a kernel-nuller at the focus of the VLTI. Conclusions: With continued upgrades of the VLTI infrastructure that will reduce fringe tracking residuals, a kernel-nuller would enable the detection of young giant exoplanets at separations < 10 AU, where radial velocity and transit methods are more sensitive., Comment: 13 pages, 12 figures

The Very Large Telescope Interferometer is one of the most proficient observatories in the world for high angular resolution. Since its first observations, it has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. Here, we introduce a new concept for the VLTI, Asgard: an instrumental suite comprised of four natively collaborating instruments: BIFROST, a combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; NOTT, a nulling interferometer dedicated to imaging young nearby planetary systems in the L band; HEIMDALLR, an all-in-one instrument performing both fringe tracking and stellar interferometry with the same optics; Baldr, a Strehl optimiser. These instruments share common goals and technologies. The goals are diverse astrophysical cases such as the study of the formation and evolution processes of binary systems, exoplanetary systems and protoplanetary disks, the characterization of orbital parameters and spin-orbit alignment of multiple systems, the characterization of the exoplanets, and the study of exozodiacal disks. Thus, the idea of this suite is to make the instruments interoperable and complementary to deliver unprecedented sensitivity and accuracy from the J to M bands to meet these goals. The interoperability of the Asgard instruments and their integration in the VLTI are major challenges for this project.

Precise control of the optical path differences (OPD) in the Very Large Telescope Interferometer (VLTI) was critical for the characterization of the black hole at the center of our Galaxy - leading to the 2020 Nobel prize in physics. There is now significant effort to push these OPD limits even further, in-particular achieving 100nm OPD RMS on the 8m unit telescopes (UT's) to allow higher contrast and sensitivity at the VLTI. This work calculated the theoretical atmospheric OPD limit of the VLTI as 5nm and 15nm RMS, with current levels around 200nm and 100nm RMS for the UT and 1.8m auxillary telescopes (AT's) respectively, when using bright targets in good atmospheric conditions. We find experimental evidence for the $f^{-17/3}$ power law theoretically predicted from the effect of telescope filtering in the case of the ATs which is not currently observed for the UT's. Fitting a series of vibrating mirrors modelled as dampened harmonic oscillators, we were able to model the UT OPD PSD of the gravity fringe tracker to $<1nm/\sqrt{Hz}$ RMSE up to 100Hz, which could adequately explain a hidden $f^{-17/3}$ power law on the UTs. Vibration frequencies in the range of 60-90Hz and also 40-50Hz were found to generally dominate the closed loop OPD residuals of Gravity. Cross correlating accelerometer with Gravity data, it was found that strong contributions in the 40-50Hz range are coming from the M1-M3 mirrors, while a significant portion of power from the 60-100Hz contributions are likely coming from between the M4-M10. From the vibrating mirror model it was shown that achieving sub 100nm OPD RMS for particular baselines (that have OPD$\sim$200nm RMS) required removing nearly all vibration sources below 100Hz.

Hi-5 is the L'-band (3.5-4.0 $\mu$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (ii) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models., Comment: 16 pages, 9 figures, SPIE 2022 "Astronomical Telescopes and Instrumentation" manuscript 12183-16

We present science cases and instrument design considerations for the BIFROST instrument that will open the short-wavelength (Y/J/H-band), high spectral dispersion (up to R=25,000) window for the VLT Interferometer. BIFROST will be part of the Asgard Suite of instruments and unlock powerful venues for studying accretion & mass-loss processes at the early/late stages of stellar evolution, for detecting accreting protoplanets around young stars, and for probing the spin-orbit alignment in directly-imaged planetary systems and multiple star systems. Our survey on GAIA binaries aims to provide masses and precision ages for a thousand stars, providing a legacy data set for improving stellar evolutionary models as well as for Galactic Archaeology. BIFROST will enable off-axis spectroscopy of exoplanets in the 0.025-1" separation range, enabling high-SNR, high spectral resolution follow-up of exoplanets detected with ELT and JWST. We give an update on the status of the project, outline our key technology choices, and discuss synergies with other instruments in the proposed Asgard Suite of instruments., Comment: 19 pages, 7 figures, SPIE 2022 "Astronomical Telescopes and Instrumentation" manuscript 12183-66

(Abridged) Context: In the previous paper in this series, we identified that a pentagonal arrangement of five telescopes, using a kernel-nulling beam combiner, shows notable advantages for some important performance metrics for a space-based mid-infrared nulling interferometer over several other considered configurations for the detection of Earth-like exoplanets around solar-type stars. Aims: We aim to produce a physical implementation of a kernel-nulling beam combiner for such a configuration, as well as a discussion of systematic and stochastic errors associated with the instrument. Methods: We developed a mathematical framework around a nulling beam combiner, and then used it along with a space interferometry simulator to identify the effects of systematic uncertainties. Results: We find that errors in the beam combiner optics, systematic phase errors and the RMS fringe tracking errors result in instrument limited performance at $\sim$4-7 $\mu$m, and zodiacal limited at $\gtrsim$10 $\mu$m. Assuming a beam splitter reflectance error of $|\Delta R| = 5\%$ and phase shift error of $\Delta\phi = 3$ degrees, we find that the fringe tracking RMS should be kept to less than 3 nm in order to be photon limited, and the systematic piston error be less than 0.5 nm to be appropriately sensitive to planets with a contrast of 1$\times 10^{-7}$ over a 4-19 $\mu$m bandpass. We also identify that the beam combiner design, with the inclusion of a well positioned shutter, provides an ability to produce robust kernel observables even if one or two collecting telescopes were to fail. The resulting four telescope combiner, when put into an X-array formation, results in a transmission map with a relative signal-to-noise ratio equivalent to 80% of the fully functioning X-array combiner., Comment: 14 Pages, 15 Figures, 3 Tables. Accepted for publication in A&A. Other papers in the LIFE series are also available. First paper: arXiv:2101.07500, preceding paper: arXiv:2201.04891. Latest update fixed some minor errors

A wide-field zenith-looking telescope operating in a mode similar to Time-Delay-Integration (TDI) or drift scan imaging can perform an infrared sky survey without active pointing control but it requires a high-speed, low-noise infrared detector. Operating from a hosted payload platform on the International Space Station (ISS), the Emu space telescope employs the paradigm-changing properties of the Leonardo SAPHIRA electron avalanche photodiode array to provide powerful new observations of cool stars at the critical water absorption wavelength (1.4 $\mu$m) largely inaccessible to ground-based telescopes due to the Earth's own atmosphere. Cool stars, especially those of spectral-type M, are important probes across contemporary astrophysics, from the formation history of the Galaxy to the formation of rocky exoplanets. Main sequence M-dwarf stars are the most abundant stars in the Galaxy and evolved M-giant stars are some of the most distant stars that can be individually observed. The Emu sky survey will deliver critical stellar properties of these cool stars by inferring oxygen abundances via measurement of the water absorption band strength at 1.4 $\mu$m. Here we present the TDI-like imaging capability of Emu mission, its science objectives, instrument details and simulation results., Comment: Accepted for publication in Journal of Astronomical Telescopes, Instruments, and Systems (JATIS)

Planet formation is often considered in the context of one circumstellar disk around one star. Yet stellar binary systems are ubiquitous, and thus a substantial fraction of all potential planets must form and evolve in more complex, dynamical environments. We present the results of a five-year astrometric monitoring campaign studying 45 binary star systems that host Kepler planet candidates. The planet-forming environments in these systems would have literally been shaped by the binary orbits that persist to the present day. Crucially, the mutual inclinations of star-planet orbits can only be addressed by a statistical sample. We describe in detail our sample selection and Keck/NIRC2 laser guide star adaptive optics observations collected from 2012 to 2017. We measure orbital arcs, with a typical accuracy of ~0.1 mas/yr, that test whether the binary orbits tend to be aligned with the edge-on transiting planet orbits. We rule out randomly-distributed binary orbits at 4.7$\sigma$, and we show that low mutual inclinations are required to explain the observed orbital arcs. If the stellar orbits have a field binary-like eccentricity distribution, then the best match to our observed orbital arcs is a distribution of mutual inclinations ranging from 0-30 degrees. We discuss the implications of such widespread planet-binary alignment in the theoretical context of planet formation and circumstellar disk evolution., Comment: Accepted to MNRAS

Aims: Optical interferometry from space for the purpose of detecting and characterising exoplanets is seeing a revival, specifically from missions such as the proposed Large Interferometer For Exoplanets (LIFE). A default assumption since the design studies of Darwin and TPF-I has been that the Emma X-array configuration is the optimal architecture for this goal. Here, we examine whether new advances in the field of nulling interferometry, such as the concept of kernel nulling, challenge this assumption. Methods: We develop a tool designed to derive the photon-limited signal to noise ratio of a large sample of simulated planets for different architecture configurations and beam combination schemes. We simulate four basic configurations: the double Bracewell/X-array, and kernel nullers with three, four and five telescopes respectively. Results: We find that a configuration of five telescopes in a pentagonal shape, using a five aperture kernel nulling scheme, outperforms the X-array design in both search (finding more planets) and characterisation (obtaining better signal, faster) when total collecting area is conserved. This is especially the case when trying to detect Earth twins (temperate, rocky planets in the habitable zone), showing a 23% yield increase over the X-array. On average, we find that a five telescope design receives 1.2 times the signal over the X-array design. Conclusions: With the results of this simulation, we conclude that the Emma X-array configuration may not be the best architecture choice for the upcoming LIFE mission, and that a five telescope design utilising kernel nulling concepts will likely provide better scientific return for the same collecting area, provided that technical solutions for the required achromatic phase shifts can be implemented., Comment: 13 pages, 9 figures, accepted for publication in A&A. This is the fourth paper of a series on the LIFE telescope; updated to revise the number of this paper within the series. Other papers in the series are also available: (LIFE 1 - arXiv:2101.07500)

Beam combiners are important components of an optical/infrared astrophysical interferometer, with many variants as to how to optimally combine two or more beams of light to fringe-track and obtain the complex fringe visibility. One such method is the use of an integrated optics chip that can instantaneously provide the measurement of the visibility without temporal or spatial modulation of the optical path. Current asymmetric planar designs are complex, resulting in a throughput penalty, and so here we present developments into a three dimensional triangular tricoupler that can provide the required interferometric information with a simple design and only three outputs. Such a beam combiner is planned to be integrated into the upcoming $\textit{Pyxis}$ interferometer, where it can serve as a high-throughput beam combiner with a low size footprint. Results into the characterisation of such a coupler are presented, highlighting a throughput of 85$\pm$7% and a flux splitting ratio between 33:33:33 and 52:31:17 over a 20% bandpass. We also show the response of the chip to changes in optical path, obtaining an instantaneous complex visibility and group delay estimate at each input delay., Comment: 20 pages, 10 figures, resubmitted to JATIS after addressing reviewer comments

The nearest region of massive star formation - the Scorpius-Centaurus OB2 association (Sco-Cen) - is a local laboratory ideally suited to the study of a wide range of astrophysical phenomena. Precision astrometry from the Gaia mission has expanded the census of this region by an order of magnitude. However, Sco-Cen's vastness and complex substructure make kinematic analysis of its traditional three regions, Upper Scorpius, Upper Centaurus-Lupus and Lower Centaurus-Crux, challenging. Here we use Chronostar, a Bayesian tool for kinematic age determination, to carry out a new kinematic decomposition of Sco-Cen using full 6-dimensional kinematic data. Our model identifies 8 kinematically distinct components consisting of 8,185 stars distributed in dense and diffuse groups, each with an independently-fit kinematic age; we verify that these kinematic estimates are consistent with isochronal ages. Both Upper Centaurus-Lupus and Lower Centaurus-Crux are split into two parts. The kinematic age of the component that includes PDS 70, one of the most well studied systems currently forming planets, is 15$\pm$3 Myr., Comment: Submitted to MNRAS. 19 pages, 9 figures

Alpha Ophiuchi (Rasalhague) is a nearby rapidly rotating A5IV star which has been imaged by infrared interferometry. $\alpha$ Oph is also part of a known binary system, with a companion semi-major axis of $\sim$430 milli-arcseconds and high eccentricity of 0.92. The binary companion provides the unique opportunity to measure the dynamical mass to compare with the results of rapid rotator evolution models. The lack of data near periastron passage limited the precision of mass measurements in previous work. We add new interferometric data from the MIRC combiner at the CHARA Array as well as new Keck adaptive optics imaging data with NIRC2, including epochs taken near periastron passage. We also obtained new radial velocities of both components at Fairborn Observatory. Our updated combined orbit for the system drastically reduces the errors of the orbital elements, and allows for precise measurement of the primary star mass at the few percent level. Our resulting primary star mass of $2.20\pm0.06$ M$_{\odot}$ agrees well with predictions from imaging results, and matches evolution models with rotation when plotting on an HR diagram. However, to truly distinguish between non-rotating and rotating evolution models for this system we need $\sim$1\% errors on mass, which might be achieved once the distance is known to higher precision in future Gaia releases. We find that the secondary mass of $0.824\pm0.023$ M$_{\odot}$ is slightly under-luminous when compared to stellar evolution models. We show that $\alpha$ Oph is a useful reference source for programs that need $\pm$1 milli-arcsecond astrometry., Comment: 17 pages, 7 figures, accepted for publication in ApJ

We present the results of a medium resolution optical spectroscopic survey of 92 cool ($3,000 \lesssim T_{\rm eff} \lesssim 4,500\,$K) southern TESS candidate planet hosts, and describe our spectral fitting methodology used to recover stellar parameters. We quantify model deficiencies at predicting optical fluxes, and while our technique works well for $T_{\rm eff}$, further improvements are needed for [Fe/H]. To this end, we developed an updated photometric [Fe/H] calibration for isolated main sequence stars built upon a calibration sample of 69 cool dwarfs in binary systems, precise to $\pm0.19\,$dex, from super-solar to metal poor, over $1.51 < {\rm Gaia}~(B_P-R_P) < 3.3$. Our fitted $T_{\rm eff}$ and $R_\star$ have median precisions of 0.8% and 1.7%, respectively and are consistent with our sample of standard stars. We use these to model the transit light curves and determine exoplanet radii for 100 candidate planets to 3.5% precision and see evidence that the planet-radius gap is also present for cool dwarfs. Our results are consistent with the sample of confirmed TESS planets, with this survey representing one of the largest uniform analyses of cool TESS candidate planet hosts to date., Comment: Accepted version. 33 Pages, 12 Figures, 9 Tables

In the new era of Extremely Large Telescopes (ELTs) currently under construction, challenging requirements drive spectrograph designs towards techniques that efficiently use a facility's light collection power. Operating in the single-mode (SM) regime, close to the diffraction limit, reduces the footprint of the instrument compared to a conventional high-resolving power spectrograph. The custom built injection fiber system with 3D-printed micro-lenses on top of it for the replicable high-resolution exoplanet and asteroseismology spectrograph at Subaru in combination with extreme adaptive optics of SCExAO, proved its high efficiency in a lab environment, manifesting up to ~77% of the theoretical predicted performance.

The CHARA Array is the longest baseline optical interferometer in the world. Operated with natural seeing, it has delivered landmark sub-milliarcsecond results in the areas of stellar imaging, binaries, and stellar diameters. However, to achieve ambitious observations of faint targets such as young stellar objects and active galactic nuclei, higher sensitivity is required. For that purpose, adaptive optics are developed to correct atmospheric turbulence and non-common path aberrations between each telescope and the beam combiner lab. This paper describes the AO software and its integration into the CHARA system. We also report initial on-sky tests that demonstrate an increase of scientific throughput by sensitivity gain and by extending useful observing time in worse seeing conditions. Our 6 telescopes and 12 AO systems with tens of critical alignments and control loops pose challenges in operation. We describe our methods enabling a single scientist to operate the entire system., Comment: SPIE, Optical and Infrared Interferometry and Imaging VII, Proceedings Volume 11446, 1144622, Dec 14, 2020 "See, https://doi.org/10.1117/12.2561560"

In the Gaia era, the majority of stars in the Solar neighbourhood have parallaxes and proper motions precisely determined while spectroscopic age indicators are still missing for a large fraction of low-mass young stars. In this work we select 756 overluminous late K and early M young star candidates in the southern sky and observe them over 64 nights with the ANU 2.3m Telescope at Siding Spring Observatory using the Echelle (R=24,000) and Wide Field spectrographs (WiFeS, R=3000-7000). Our selection is kinematically unbiased to minimize the preference against low-mass members of stellar associations that dissipate first, and to include potential members of diffuse components. We provide measurements of H$\alpha$ and calcium H&K emission, as well as lithium absorption line, that enable identification of stars as young as $\sim$10-30 Myr which is a typical age of a stellar association. We report on 346 stars showing a detectable lithium line, 318 of which are not found in the known catalogs of young stars. We also report 126 additional stars in our sample which have no detectable lithium but signs of stellar activity indicating youth. Radial velocities are determined for WiFeS spectra with a precision of 3.2 $\mathrm{km\;s^{-1}}$ and 1.5 $\mathrm{km\;s^{-1}}$ for the Echelle sample., Comment: Submitted to MNRAS. 15 pages, 12 figures

Ground-based optical long-baseline interferometry has the power to measure the orbits of close binary systems at ~10 micro-arcsecond precision. This precision makes it possible to detect "wobbles" in the binary motion due to the gravitational pull from additional short period companions. We started the ARrangement for Micro-Arcsecond Differential Astrometry (ARMADA) survey with the MIRC-X instrument at the CHARA array for the purpose of detecting giant planets and stellar companions orbiting individual stars in binary systems. We describe our observations for the survey, and introduce the wavelength calibration scheme that delivers precision at the tens of micro-arcseconds level for <0.2 arcsecond binaries. We test our instrument performance on a known triple system kappa Peg, and show that our survey is delivering a factor of 10 better precision than previous similar surveys. We present astrometric detections of tertiary components to two B-type binaries: a 30-day companion to alpha Del, and a 50-day companion to nu Gem. We also collected radial velocity data for alpha Del with the Tennessee State University Automated Spectroscopic Telescope at Fairborn Observatory. We are able to measure the orbits and masses of all three components in these systems. We find that the previously published RV orbit for the inner pair of nu Gem is not consistent with our visual orbit. The precision achieved for these orbits suggests that our ARMADA survey will be successful at discovering new compact triple systems to A/B-type binary systems, leading to better statistics of hierarchical system architectures and formation history., Comment: 25 pages, 15 figures, accepted for publication in AJ

Interferometric observables are strongly correlated, yet it is common practice to ignore these correlations in the data analysis process. We develop an empirical model for the correlations present in Very Large Telescope Interferometer GRAVITY data and show that properly accounting for them yields fainter detection limits and increases the reliability of potential detections. We extracted the correlations of the (squared) visibility amplitudes and the closure phases directly from intermediate products of the GRAVITY data reduction pipeline and fitted our empirical models to them. Then, we performed model fitting and companion injection and recovery tests with both simulated and real GRAVITY data, which are affected by correlated noise, and compared the results when ignoring the correlations and when properly accounting for them with our empirical models. When accounting for the correlations, the faint source detection limits improve by a factor of up to $\sim 2$ at angular separations $> 20~\rm{mas}$. For commonly used detection criteria based on $\chi^2$ statistics, this mostly results in claimed detections being more reliable. Ignoring the correlations present in interferometric data is a dangerous assumption which might lead to a large number of false detections. The commonly used detection criteria (e.g. in the model fitting pipeline CANDID) are only reliable when properly accounting for the correlations; furthermore, instrument teams should work on providing full covariance matrices instead of statistically independent error bars as part of the official data reduction pipelines., Comment: 16 pages, 10 figures, accepted for publication by A&A

Statistical studies of exoplanets and the properties of their host stars have been critical to informing models of planet formation. Numerous trends have arisen in particular from the rich Kepler dataset, including that exoplanets are more likely to be found around stars with a high metallicity and the presence of a "gap" in the distribution of planetary radii at 1.9$R_\oplus$. Here we present a new analysis on the Kepler field, using the APOGEE spectroscopic survey to build a metallicity calibration based on Gaia, 2MASS and Stromgren photometry. This calibration, along with masses and radii derived from a Bayesian isochrone fitting algorithm, is used to test a number of these trends with unbiased, photometrically derived parameters, albeit with a smaller sample size in comparison to recent studies. We recover that planets are more frequently found around higher metallicity stars; over the entire sample, planetary frequencies are $0.88\pm0.12$ percent for [Fe/H]<0 and $1.37\pm0.16$ percent for [Fe/H]$\geq$0 but at two sigma we find that the size of exoplanets influences the strength of this trend. We also recover the planet radius gap, along with a slight positive correlation with stellar mass. We conclude that this method shows promise to derive robust statistics of exoplanets. We also remark that spectrophotometry from Gaia DR3 will have an effective resolution similar to narrow band filters and allow to overcome the small sample size inherent in this study., Comment: 11 Pages, 13 Figures, 4 Tables, resubmitted to MNRAS after addressing reviewer comments

We present a flexible code created for imaging from the bispectrum and visibility-squared. By using a simulated annealing method, we limit the probability of converging to local chi-squared minima as can occur when traditional imaging methods are used on data sets with limited phase information. We present the results of our code used on a simulated data set utilizing a number of regularization schemes including maximum entropy. Using the statistical properties from Monte-Carlo Markov chains of images, we show how this code can place statistical limits on image features such as unseen binary companions., Comment: Preprint version of paper published in 2006 SPIE proceedings. Please contact John Monnier (monnier@umich.edu) for current distribution of the MACIM software

We report the discovery of TOI 694 b and TIC 220568520 b, two low-mass stellar companions in eccentric orbits around metal-rich Sun-like stars, first detected by the Transiting Exoplanet Survey Satellite (TESS). TOI 694 b has an orbital period of 48.05131$\pm$0.00019 days and eccentricity of 0.51946$\pm$0.00081, and we derive a mass of 89.0$\pm$5.3 $M_J$ (0.0849$\pm$0.0051 $M_\odot$) and radius of 1.111$\pm$0.017 $R_J$ (0.1142$\pm$0.0017 $R_\odot$). TIC 220568520 b has an orbital period of 18.55769$\pm$0.00039 days and eccentricity of 0.0964$\pm$0.0032, and we derive a mass of 107.2$\pm$5.2 $M_J$ (0.1023$\pm$0.0050 $M_\odot$) and radius of 1.248$\pm$0.018 $R_J$ (0.1282$\pm$0.0019 $R_\odot$). Both binary companions lie close to and above the Hydrogen burning mass threshold that separates brown dwarfs and the lowest mass stars, with TOI 694 b being 2-$\sigma$ above the canonical mass threshold of 0.075 $M_\odot$. The relatively long periods of the systems mean that the magnetic fields of the low-mass companions are not expected to inhibit convection and inflate the radius, which according to one leading theory is common in similar objects residing in short-period tidally-synchronized binary systems. Indeed we do not find radius inflation for these two objects when compared to theoretical isochrones. These two new objects add to the short but growing list of low-mass stars with well-measured masses and radii, and highlight the potential of the TESS mission for detecting such rare objects orbiting bright stars., Comment: Accepted for publication in AJ

We conduct a rigorous examination of the nearby red supergiant Betelgeuse by drawing on the synthesis of new observational data and three different modeling techniques. Our observational results include the release of new, processed photometric measurements collected with the space-based SMEI instrument prior to Betelgeuse's recent, unprecedented dimming event. We detect the first radial overtone in the photometric data and report a period of $185\pm13.5$ d. Our theoretical predictions include self-consistent results from multi-timescale evolutionary, oscillatory, and hydrodynamic simulations conducted with the Modules for Experiments in Stellar Astrophysics (MESA) software suite. Significant outcomes of our modeling efforts include a precise prediction for the star's radius: $764^{+116}_{-62} R_{\odot}$. In concert with additional constraints, this allows us to derive a new, independent distance estimate of $168^ {+27}_{-15}$ pc and a parallax of $\pi=5.95^{+0.58}_{-0.85}$ mas, in good agreement with Hipparcos but less so with recent radio measurements. Seismic results from both perturbed hydrostatic and evolving hydrodynamic simulations constrain the period and driving mechanisms of Betelgeuse's dominant periodicities in new ways. Our analyses converge to the conclusion that Betelgeuse's $\approx 400$ day period is the result of pulsation in the fundamental mode, driven by the $\kappa$-mechanism. Grid-based hydrodynamic modeling reveals that the behavior of the oscillating envelope is mass-dependent, and likewise suggests that the non-linear pulsation excitation time could serve as a mass constraint. Our results place $\alpha$ Ori definitively in the core helium-burning phase near the base of the red supergiant branch. We report a present-day mass of $16.5$--$19 ~M_{\odot}$---slightly lower than typical literature values., Comment: v5: published in the Astrophysical Journal v3/v4: first revision with the Astrophysical Journal (v4: abstract corrected). v1/v2: submitted version and minor updates. Photometry available at https://konkoly.hu/staff/lmolnar/data/alpha_Ori_SMEI_1d-avg_native-plus-Vmag.txt

Asteroseismology is a powerful tool for probing the internal structures of stars by using their natural pulsation frequencies. It relies on identifying sequences of pulsation modes that can be compared with theoretical models, which has been done successfully for many classes of pulsators, including low-mass solar-type stars, red giants, high-mass stars and white dwarfs. However, a large group of pulsating stars of intermediate mass--the so-called delta Scuti stars--have rich pulsation spectra for which systematic mode identification has not hitherto been possible. This arises because only a seemingly random subset of possible modes are excited, and because rapid rotation tends to spoil the regular patterns. Here we report the detection of remarkably regular sequences of high-frequency pulsation modes in 60 intermediate-mass main-sequence stars, allowing definitive mode identification. Some of these stars have space motions that indicate they are members of known associations of young stars, and modelling of their pulsation spectra confirms that these stars are indeed young., Comment: published in Nature https://www.nature.com/articles/s41586-020-2226-8

Spectroscopic observations are reported for the 2.75 day, double-lined, detached eclipsing binary EPIC 219552514 located at the turnoff of the old nearby open cluster Ruprecht 147. A joint analysis of our radial velocity measurements and the K2 light curve leads to masses of M1 = 1.509 (+0.063 / -0.056) MSun and M2 = 0.649 (+0.015 / -0.014) MSun for the primary and secondary, along with radii of R1 = 2.505 (+0.026 / -0.031) RSun and R2 = 0.652 (+0.013 / -0.012) RSun, respectively. The effective temperatures are 6180 +/- 100 K for the F7 primary and 4010 +/- 170 K for the late K secondary. The orbit is circular, and the stars' rotation appears to be synchronized with the orbital motion. This is the third eclipsing system analyzed in the same cluster, following our earlier studies of EPIC 219394517 and EPIC 219568666. By comparison with stellar evolution models from the PARSEC series, we infer an age of 2.67 (+0.39 / -0.55) Gyr that is consistent with the estimates for the other two systems. EPIC 219552514 is a hierarchical triple system, with the period of the slightly eccentric outer orbit being 463 days. The unseen tertiary is either a low-mass M dwarf or a white dwarf., Comment: 12 pages in emulateapj format, including figures and tables. Accepted for publication in The Astrophysical Journal

In the current era of Gaia and large, high signal to noise stellar spectroscopic surveys, there is an unmet need for a reliable library of fundamentally calibrated stellar effective temperatures based on accurate stellar diameters. Here we present a set of precision diameters and temperatures for a sample of 6 dwarf, 5 sub-giant, and 5 giant stars observed with the PIONIER beam combiner at the VLTI. Science targets were observed in at least two sequences with five unique calibration stars each for accurate visibility calibration and to reduce the impact of bad calibrators. We use the standard PIONIER data reduction pipeline, but bootstrap over interferograms, in addition to employing a Monte-Carlo approach to account for correlated errors by sampling stellar parameters, limb darkening coefficients, and fluxes, as well as predicted calibrator angular diameters. The resulting diameters were then combined with bolometric fluxes derived from broadband Hipparcos-Tycho photometry and MARCS model bolometric corrections, plus parallaxes from Gaia to produce effective temperatures, physical radii, and luminosities for each star observed. Our stars have mean angular diameter and temperatures uncertainties of 0.8% and 0.9% respectively, with our sample including diameters for 10 stars with no pre-existing interferometric measurements. The remaining stars are consistent with previous measurements, with the exception of a single star which we observe here with PIONIER at both higher resolution and greater sensitivity than was achieved in earlier work., Comment: Published in MNRAS, 22 pages, 7 figures