Search

Global industry relies on a linear approach for economic growth. One step towards transformation is the implementation of a circular economy and the reclamation of anthropogenic deposits. This study examines two filter dusts, one German and one Argentinian, from the production of calcined clays, representing such deposits. Investigations and comparisons of untreated and calcined filter dust and the industrial base product pave the way for using waste product filter dust as supplementary cementitious material (SCM). In the future, some twenty thousand tons of contemporary waste could potentially be used annually as SCM. The results confirm the suitability of one material as a full-fledged SCM without further treatment and a measured pozzolanic reactivity on par with fly ash. Sample materials were classified into two groups: one was found to be a reactive pozzolanic material; the other was characterized as filler material with minor pozzolanic reactivity. Additionally, important insights into the physical properties of oven dust and heat-treated oven dust were obtained. For both material groups, an inversely proportional relationship with rising calcination temperatures was found for the specific surface area and water demand. The impact of the calcination temperature on both the particle size distribution and the potential to optimize the reactivity performance is presented.

In this review by TC- 282 CCL, a comprehensive examination of various facets of chloride ingress in calcined clay-based concrete in aggressive chloride-rich environments is presented due to its significance in making reinforced concrete structures susceptible to chloride-induced corrosion damages. The review presents a summary of available literature focusing on materials characteristics influencing the chloride resistance of calcined clay-based concrete, such as different clay purity, kaolinite content and other clay minerals, underscoring the significance of pore refinement, pore solution composition, and chloride binding mechanisms. Further, the studies dealing with the performance at the concrete scale, with a particular emphasis on transport properties, curing methods, and mix design, are highlighted. Benchmarking calcined clay mixes with fly ash or slag-based concrete mixes that are widely used in aggressive chloride conditions instead of OPC is recommended. Such comparison could extend the usage of calcined clay as a performance-enhancing mineral admixture in the form of calcined clay or LC2 (limestone-calcined clay). The chloride diffusion coefficient in calcined clay concrete is reported to be significantly lower (about 5-10 times in most literature available so far) compared to OPC, and even lower compared to fly ash and slag-based concrete at early curing ages reported across recent literature made with different types of cements and concrete mixes. Limited studies dealing with reinforcement corrosion point out that calcined clay delays corrosion initiation and reduces corrosion rates despite the reduction in critical chloride threshold. Most of these results on corrosion performance are mainly from laboratory studies and warrant field evaluation in future. Finally, two case studies demonstrating the application of calcined clay-based concrete in real-world marine exposure conditions are discussed to showcase the promising potential of employing low-purity calcined clay-based concrete for reducing carbon footprint and improving durability performance in chloride exposure., (© Crown 2024.)

Two waste fired brick powders coming from brick factories located in Argentine and Czech Republic were examined as alternative mineral admixtures for the production of blended cements. In pastes composition, local Portland cements (Argentine and Czech) were substituted with 8-40%, by mass, with powdered ceramic waste. For the ceramic waste-Portland cement system, workability, the heat released, pozzolanity, specific density, compressive strength, hydrated phases, porosity, and pore size distribution were tested. The relevance of the dilution effect, filler effect, and pozzolanic activity was analyzed to describe the general behavior of the pozzolan/cement system. The properties and performance of cement blends made with finely ground brick powder depended on the composition of ceramic waste and its reactivity, the plain cement used, and the replacement level. Results showed that the initial mini-slump was not affected by a low ceramic waste replacement (8% and 16%), and then it was decreased with an increase in the ceramic waste content. Brick powder behaved as a filler at early ages, but when the hydration proceeded, its pozzolanic activity consumed partially the calcium hydroxide and promoted the formation of hydrated calcium aluminates depending on the age and present carbonates. Finally, blended cements with fired brick powder had low compressive strength at early ages but comparable strength-class at later age.