Search

Abstract Respiration stands as a vital process reflecting physiological and pathological human health status. Exhaled breath analysis offers a facile, non-invasive, swift, and cost-effective approach for diagnosing and monitoring diseases by detecting concentration changes of specific biomarkers. In this study, we employed Polyethylene oxide/copper (I) oxide composite nanofibers (PCNFs), synthesized via the electrospinning method as the sensing material to measure ethanol levels (1–200 ppm) in an exhaled breath simulator environment. The integrated contact-separation triboelectric nanogenerator was utilized to power the self-powered PCNFs exhaled breath sensor. The PCNFs-based gas sensor demonstrates promising results with values of 0.9 and 3.2 for detecting 5 ppm and 200 ppm ethanol, respectively, in the presence of interfering gas at 90% relative humidity (RH). Notably, the sensor displayed remarkable ethanol selectivity, with ratios of 10:1 to methanol and 25:1 to acetone. Response and recovery times for 200 ppm ethanol at 90 RH% were rapid, at 2.7 s and 5.8 s, respectively. The PCNFs-based exhaled breath sensor demonstrated consistent and stable performance in practical conditions, showcasing its potential for integration into wearable devices. This self-powered breath sensor enabling continuous monitoring of lung cancer symptoms and facilitating compliance checks with legal alcohol consumption limits.

In neurophysiological recording, reducing electrode impedance is crucial for enhancing the signal-to-noise ratio and achieving the desired spatial resolution. This study presents an approach to improve the performance of Au/Cr/glass electrodes by incorporating synthesized gold nanosheets without the need for additional adhesive material. We characterized the performance of the modified electrodes using electrochemical impedance spectroscopy and equivalent circuit analysis. Our findings showed an 81% reduction in mean impedance for the modified electrode, which was 0.85 kΩ at 1 kHz, compared to the unmodified electrode at 4.5 kΩ, an improvement attributed to the higher effective surface area of the modified electrode. Additionally, Scanning electron microscopy observations of PC12 cells cultured on the modified electrodes indicated favorable cell elongation and interaction with the rough surface. Stability studies indicated acceptable performance of the modified electrodes in solution environments. These results suggest that surface modification of electrodes with gold nanosheets could be a promising strategy for enhancing neural interface applications.

Abstract Harvesting solar energy, as a clean and abundant resource, in the photothermal process, is the winning point of solar steam generation (SSG) systems. Herein, copper plasmonic nanoparticles were synthesized through a green method via red sanders extraction on the cotton fabric as the reducing matrix. The prepared fabrics were analyzed using FESEM, EDS, XRD, PL, Raman, and contact angle. The treated fabric on the stitched PU foam with cotton yarns with bio-inspired jellyfish structure was used for heat localization and water transmission, simultaneously. The evaporation rate, enhancement, and conversion efficiency of the plasmonic SSG were 1.73 kg m−2 h−1, 179%, and ~ 98%, under one sun irradiation, respectively. The quality of the collected water was investigated via induced coupled plasma which presents the proper solar desalination (> 99.83% for filtration of Na+ ion). Regenerating features of the treated fabric along with the simple and cost-effective preparation method promises viable aspects of our system for large-scale applications.

Abstract Self-powered detectors based on triboelectric nanogenerators (TENG) have been considered because of their capability to convert ambient mechanical energy to electrical out-put signal, instead of conventional usage of electrochemical batteries as power sources. In this regard, the self-powered photodetectors have been designed through totally two lay out called passive and active circuit. in former model, impedance matching between the TENG and the resistance of the circuit’s elements is crucial, which is not investigated systematically till now. In this paper, a cost effective novel planar photodetector (PD) based on heterojunction of SnS2 sheets and Cs0.05(FA0.83 MA0.17)0.95Pb(I0.83Br0.17)3 three cationic lead iodide based perovskite (PVK) layer fabricated which powered by graphene oxide (GO) paper and Kapton based contact-separated TENG (CS-TENG). To achieve the high performance of this device, the proper range of the load resistances in the circuit regards to TENG’s characterization has been studied. In the next steps, the integrated self-powered photo-detection system was designed by applying Kapton/FTO and hand/FTO TENG, separately, in the proposed impedance matching circuit. The calculated D* of integrated self-powered SnS2/PVK supplied by tapping the Kapton and hand on FTO is 2.83 × 1010 and 1.10 × 1013 Jones under the 10 mW/cm2 of white light intensity, the investigations determine that for designing significate performance of self-powered PD supplied by TENG, the existence of the load resistance with the well match amount to the utilized TENG is crucial. Our results which can be generalized to other types of passive self-powered sensors, are substantial to both academia and industry concepts.

Due to the favorable properties of two-dimensional materials such as SnS2, with an energy gap in the visible light spectrum, and InSe, with high electron mobility, the combination of them can create a novel platform for electronic and optical devices. Herein, we study a tunable gain SnS2/InSe Van der Waals heterostructure photodetector. SnS2 crystals were synthesized by chemical vapor transport method and characterized using X-ray diffraction and Raman spectroscopy. The exfoliated SnS2 and InSe layers were transferred on the substrate. This photodetector presents photoresponsivity from 14 mA/W up to 740 mA/W and detectivity from 2.2 × 108 Jones up to 3.35 × 109 Jones by gate modulation from 0 V to +70 V. Light absorption and the charge carrier generation mechanism were studied by the Silvaco TCAD software and the results were confirmed by our experimental observations. The rather high responsivity and visible spectrum response makes the SnS2/InSe heterojunction a potential candidate for commercial visible image sensors.

Mona Khafaji,1 Masoud Zamani,2 Manouchehr Vossoughi,2,3 Azam Iraji zad1,4 1Institute for Nanoscience and Nanotechnology, Sharif University of Technology, Tehran 14588-89694, Iran; 2Institute for Biotechnology and Environment (IBE), Sharif University of Technology, Tehran, Iran; 3Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran; 4Department of Physics, Sharif University of Technology, Tehran 14588, IranCorrespondence: Mona KhafajiInstitute for Nanoscience and Nanotechnology, Sharif University of Technology, PO Box 11365-11155, Tehran 14588-89694, IranTel +98-21-66164123Fax +98-21-66164117Email mona.khafaji@gmail.comManouchehr VossoughiDepartment of Chemical and Petroleum Engineering, Sharif University of Technology, PO Box 11365-8639, Tehran, IranTel +98-21-66164104Fax +98-21-66005417Email vosoughi@sharif.eduIntroduction: To date, numerous iron-based nanostructures have been designed for cancer therapy applications. Although some of them were promising for clinical applications, few efforts have been made to maximize the therapeutic index of these carriers. Herein, PEGylated silica-coated iron oxide nanoparticles (PS-IONs) were introduced as multipurpose stimuli-responsive co-delivery nanocarriers for a combination of dual-drug chemotherapy and photothermal therapy.Methods: Superparamagnetic iron oxide nanoparticles were synthesized via the sonochemical method and coated by a thin layer of silica. The nanostructures were then further modified with a layer of di-carboxylate polyethylene glycol (6 kDa) and carboxylate-methoxy polyethylene glycol (6 kDa) to improve their stability, biocompatibility, and drug loading capability. Doxorubicin (DOX) and cisplatin (CDDP) were loaded on the PS-IONs through the interactions between the drug molecules and polyethylene glycol.Results: The PS-IONs demonstrated excellent cellular uptake, cytocompatibility, and hemocompatibility at the practical dosage. Furthermore, in addition to being an appropriate MRI agent, PS-IONs demonstrated superb photothermal property in 0.5 W/cm2 of 808 nm laser irradiation. The release of both drugs was effectively triggered by pH and NIR irradiation. As a result of the intracellular combination chemotherapy and 10 min of safe power laser irradiation, the highest cytotoxicity for iron-based nanocarriers (97.3±0.8%) was achieved.Conclusion: The results of this study indicate the great potential of PS-IONs as a multifunctional targeted co-delivery system for cancer theranostic application and the advantage of employing proper combination therapy for cancer eradication.Keywords: iron oxide nanoparticles, chemo/photothermal therapy, dual-drug delivery, control release

Recent research interest in two-dimensional (2D) materials has led to an emerging new group of materials known as transition metal dichalcogenides (TMDs), which have significant electrical, optical, and transport properties. MoS2 is one of the well-known 2D materials in this group, which is a semiconductor with controllable band gap based on its structure. The hydrothermal process is known as one of the scalable methods to synthesize MoS2 nanostructures. In this study, the gas sensing properties of flower-shaped MoS2 nanoflakes, which were prepared from molybdenum trioxide (MoO3) by a facile hydrothermal method, have been studied. Material characterization was performed using X-ray diffraction, Brunauer–Emmett–Teller surface area measurements, elemental analysis using energy dispersive X-ray spectroscopy, and field-emission scanning electron microscopy. The gas sensing characteristics were evaluated under exposure to various concentrations of xylene and methanol vapors. The results reveal higher sensitivity and shorter response times for methanol at temperatures below 200 °C toward 200 to 400 ppm gas concentrations. The sensing mechanisms for both gases are discussed based on simulation results using density functional theory and charge transfer.

In this work, we report the synthesis of silver decamolybdate, Ag6Mo10O33, nanostructure by a simple mechanohemical process followed by calcination treatment using acetamide as driving agent. Morphological study by scanning electron microscopy (SEM) images revealed bundles of rods grown closely together with an average diameter of 92 nm for Ag6Mo10O33 sample. Ni-substituted Ag6Mo10O33 compound was prepared via introducing nickel cation to precursor system in mechanical milling step. The particle size decreased to 87 nm by incorporating nickel units in substituted polymolybdate. It was concluded that the suitable selection of reagents can direct solid phase reaction towards producing nanostructured products. This technique is easy and simple for preparation of various mixed metal oxides without using any solvents and or complex procedures. In addition, the photocatalytic activity of the prepared products was studied on the removal of 4-nitro phenol (4-NP) as organic pollutant from water. The obtained results were also discussed in detail.