Search

This Response addresses critiques raised about the Binding Debye–Hückel (BiDH) theory [Naseri Boroujeni et al., J. Chem. Phys. 159, 154503 (2023)] by Simonin and Bernard [J.-P. Simonin and O. Bernard, J. Chem. Phys. 161, 057102 (2024)]. The critiques questioned the foundational framework of the Debye–Hückel (DH) theory, the relevance of ion pairing in primitive model fluids, and the accuracy of the BiDH model compared to mean spherical approximation model. Through a systematic rebuttal, supported by extensive literature review and comparison with Monte Carlo simulation data, this Response addresses these concerns. It demonstrates the efficacy of DH theory in describing real electrolyte solutions, validates the relevance of ion pairing in primitive model fluids, and establishes the BiDH model's accuracy in describing electrolyte properties. [ABSTRACT FROM AUTHOR]

Ion pair formation is a fundamental molecular process that occurs in a wide variety of systems, including electrolytes, biological systems, and materials. In solution, the thiocyanate (SCN−) anion interacts with cations to form contact ion pairs (CIPs). Due to its ambidentate nature, thiocyanate can bind through either its sulfur or nitrogen atoms, depending on the solvent. This study focuses on the binding nature of thiocyanate with lithium ions as a function of the solvents using FTIR, 2D infrared spectroscopy (2DIR) spectroscopies, and theoretical calculations. The study reveals that the SCN− binding mode (S or N end) in CIPs can be identified through 2DIR spectroscopy but not by linear IR spectroscopy. Linear IR spectroscopy shows that the CN stretch frequencies are too close to one another to separate N- and S-bound CIPs. Moreover, the IR spectrum shows that the S–C stretch presents different frequencies for the salt in different solvents, but it is related to the anion speciation rather than to its binding mode. A similar trend is observed for the anion bend. 2DIR spectra show different dynamics for N-bound and S-bound thiocyanate. In particular, the frequency–frequency correlation function (FFCF) dynamics extracted from the 2DIR spectra have a single picosecond exponential decay for N-bound thiocyanate and a biexponential decay for S-bound thiocyanate, consistent with the binding mode of the anion. Finally, it is also observed that the binding mode also affects the line shape parameters, probably due to the different molecular mechanisms of the FFCF for N- and S-bound CIPs. [ABSTRACT FROM AUTHOR]

In this work, we performed static density functional theory calculations and ab initio metadynamics simulations to systematically investigate the association mechanisms and dynamic structures of four kinds of ion pairs that could be formed before the nucleation of CaCO3. For Ca2+– H C O 3 − and Ca2+– C O 3 2 − pairs, the arrangement of ligands around Ca2+ evolves between the six-coordinated octahedral structure and the seven-coordinated pentagonal bipyramidal structure. The formation of ion pairs follows an associative ligand substitution mechanism. Compared with H C O 3 − , C O 3 2 − exhibits a stronger affinity to Ca2+, leading to the formation of a more stable precursor phase in the prenucleation stage, which promotes the subsequent CaCO3 nucleation. In alkaline environments, excessive OH− ions decrease the coordination preference of Ca2+. In this case, the formation of Ca(OH)+– C O 3 2 − and Ca(OH)2– C O 3 2 − pairs favors the dissociative ligand substitution mechanism. The inhibiting effects of OH− ion on the CaCO3 association can be interpreted from two aspects, i.e., (1) OH− neutralizes positive charges on Ca2+, decreases the electrostatic interactions between Ca2+ and C O 3 2 − , and thus hinders the formation of the CaCO3 monomer, and (2) OH− decreases the capacity of Ca2+ for accommodating O, making it easier to separate Ca2+ and C O 3 2 − ions. Our findings on the ion association behaviors in the initial stage of CaCO3 formation not only help scientists evaluate the impact of ocean acidification on biomineralization but also provide theoretical support for the discovery and development of more effective approaches to manage undesirable scaling issues. [ABSTRACT FROM AUTHOR]

We present an experimental study of multiple-electron capture-induced fragmentation dynamics of Ar 2 m + (4 ≤ m ≤ 7) dimer ions in 4 keV/u Ar8+–Ar2 collisions. The fragment recoil ion pairs and the charge-changing projectiles are coincidentally measured using a double coincidence technique. The branching ratios between the different charge-sharing fragmentation channels show an inherent enhancement of the asymmetric channels. The kinetic energy release (KER) distributions for the associated electron capture process show a shift in the mean KER values toward the higher side with increasing capture stabilization. The interplay between the different projectile autoionization processes sheds light on the energy depositions to the system during collisions. The Coulomb potential energy curves give a physical insight into the role of the projectile final states in the dimer fragmentation dynamics. The dimer-axis orientation-dependent cross sections for the asymmetric fragmentation channels reveal a forward–backward asymmetry that arises from the geometry of the collision system. Our findings thus give insight into the impact parameter-controlled fragmentation dynamics of multiply charged Ar 2 m + dimer ions in highly charged ion–dimer slow collisions. [ABSTRACT FROM AUTHOR]

The crystallization process of methane hydrates in a confined geometry resembling seabed porous silica sedimentary conditions has been studied using molecular dynamics simulations. With this objective in mind, a fully atomistic quartz silica slit pore has been designed, and the temperature stability of a methane hydrate crystalline seed in the presence of water and guest molecule methane has been analyzed. NaCl ion pairs have been added in different concentrations, simulating salinity conditions up to values higher than average oceanic conditions. The structure obtained when the hydrate crystallizes inside the pore is discussed, paying special attention to the presence of ionic doping inside the hydrate and the subsequent induced structural distortion. The shift in the hydrate stability conditions due to the increasing water salinity is discussed and compared with the case of unconfined hydrate, concluding that the influence of the confinement geometry and pore hydrophilicity produces a larger deviation in the confined hydrate phase equilibria. [ABSTRACT FROM AUTHOR]

In this study, we extended the optimized potentials for liquid simulation-ionic-liquid virtual site (OPLS-VSIL) force field (FF) to imidazolium-based dicationic ionic liquids (DILs) and evaluated the ability of different OPLS-based FFs (i.e., OPLS-2009IL, 0.8*OPLS-2009IL, and OPLS-VSIL) in predicting different properties of the studied DIL by comparing their results with ab initio molecular dynamics (AIMD) simulation and experimental results. To achieve this purpose, MD simulations with three different OPLS-based FFs as well as AIMD simulation were performed for [C3(mim)2][NTF2]2 DIL and its structural, dynamical, vibrational, and volumetric properties were analyzed. Structural properties of the studied DIL, i.e., radial distribution functions (RDFs), structure factor, and hydrogen-bond network, showed that compared to 0.8*OPLS-2009IL FF, there is a much better agreement between the results of both OPLS-2009IL and OPLS-VSIL FFs with the AIMD simulation. On the other hand, the results of dynamical properties, such as mean square displacements, van Hove correlation functions as well as hydrogen bond, ion pair, and ion cage dynamics, depicted that in both 0.8*OPLS-2009IL and OPLS-VSIL FFs, the dynamics of the system is almost similar, and compared to OPLS-2009IL FF, they have better agreements with experimental results where they exist. So, it can be seen that although reducing the total charge of studied DIL by 20% leads to an increase in the dynamics of the system, the type distribution of partial charges on each atom does not significantly affect the system's dynamics. The calculated infrared (IR) and power spectra showed that the vibrational features of studied DIL in three OPLS-based FFs are mostly the same and reducing total charge and different type distribution of partial charges have no significant effect on the studied system. Furthermore, in volumetric properties, OPLS-VSIL FF shows somehow better agreement with experimental results. Overall, the evaluation of different structural, dynamical, vibrational, and volumetric properties of [C3(mim)2][NTF2]2 DIL shows that the OPLS-VSIL FF may be the best choice among the different studied OPLS FFs. [ABSTRACT FROM AUTHOR]

The Adaptive Solvent-Scaling (AdSoS) scheme [J. Chem. Phys. 155 (2021) 094107] is an adaptive-resolution approach for performing simulations of a solute embedded in a fine-grained (FG) solvent region surrounded by a coarse-grained (CG) solvent region, with a continuous FG ↔ CG switching of the solvent resolution across a buffer layer. Instead of relying on a distinct CG solvent model, AdSoS is based on CG models defined by a dimensional scaling of the FG solvent by a factor s, accompanied by the s-dependent modulation of its mass and interaction parameters. The latter changes are designed to achieve an isomorphism between the dynamics of the FG and CG models, and to preserve the dispersive and dielectric solvation properties of the solvent with respect to a solute at FG resolution. As a result, the AdSoS scheme minimizes the thermodynamic mismatch between different regions of the adaptive-resolution system. The present article generalizes the scheme initially introduced for a pure atomic liquid in slab geometry to more practically relevant situations involving (i) a molecular dipolar solvent (e.g., water); (ii) a radial geometry (i.e., spherical rather than planar layers); and (iii) the inclusion of a solute (e.g., water molecule, dipeptide, ion, or ion pair). [ABSTRACT FROM AUTHOR]

Cd-doped ZrO2 catalyst has been found to have high selectivity and activity for CO2 hydrogenation to methanol. In this work, density functional theory calculations were carried out to investigate the microscopic mechanism of the reaction. The results show that Cd doping effectively promotes the generation of oxygen vacancies, which significantly activate the CO2 with stable adsorption configurations. Compared with CO2, gaseous H2 adsorption is more difficult, and it is mainly dissociated and adsorbed on the surface as [HCd–HO]* or [HZr–HO]* compact ion pairs, with [HCd–HO]* having the lower energy barrier. The reaction pathways of CO2 to methanol has been investigated, revealing the formate path as the dominated pathway via HCOO* to H2COO* and to H3CO*. The hydrogen anions, HCd* and HZr*, significantly reduce the energy barriers of the reaction. [ABSTRACT FROM AUTHOR]

Cd-doped ZrO2 catalyst has been found to have high selectivity and activity for CO2 hydrogenation to methanol. In this work, density functional theory calculations were carried out to investigate the microscopic mechanism of the reaction. The results show that Cd doping effectively promotes the generation of oxygen vacancies, which significantly activate the CO2 with stable adsorption configurations. Compared with CO2, gaseous H2 adsorption is more difficult, and it is mainly dissociated and adsorbed on the surface as [HCd–HO]* or [HZr–HO]* compact ion pairs, with [HCd–HO]* having the lower energy barrier. The reaction pathways of CO2 to methanol has been investigated, revealing the formate path as the dominated pathway via HCOO* to H2COO* and to H3CO*. The hydrogen anions, HCd* and HZr*, significantly reduce the energy barriers of the reaction. [ABSTRACT FROM AUTHOR]

In this computational study, we describe a self-consistent trajectory simulation approach to capture the effect of neutral gas pressure on ion–ion mutual neutralization (MN) reactions. The electron transfer probability estimated using Landau–Zener (LZ) transition state theory is incorporated into classical trajectory simulations to elicit predictions of MN cross sections in vacuum and rate constants at finite neutral gas pressures. Electronic structure calculations with multireference configuration interaction and large correlation consistent basis sets are used to derive inputs to the LZ theory. The key advance of our trajectory simulation approach is the inclusion of the effect of ion-neutral interactions on MN using a Langevin representation of the effect of background gas on ion transport. For H+ − H− and Li+ − H(D)−, our approach quantitatively agrees with measured speed-dependent cross sections for up to ∼105 m/s. For the ion pair Ne+ − Cl−, our predictions of the MN rate constant at ∼1 Torr are a factor of ∼2 to 3 higher than the experimentally measured value. Similarly, for Xe+ − F− in the pressure range of ∼20 000–80 000 Pa, our predictions of the MN rate constant are ∼20% lower but are in excellent qualitative agreement with experimental data. The paradigm of using trajectory simulations to self-consistently capture the effect of gas pressure on MN reactions advanced here provides avenues for the inclusion of additional nonclassical effects in future work. [ABSTRACT FROM AUTHOR]

Copyright of Baghdad Science Journal is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Coulombic efficiency of over 99 % is rarely achieved for Li metal anode below −40 °C, hindering the practical application of high‐energy‐density Li metal batteries under extreme conditions. Herein, limiting factors for Li metal reversibility are investigated utilizing ether‐based localized high‐concentration electrolytes of different solvent‐diluent combinations. We find that along with the desolvation barrier, bulk ion transport properties including ionic conductivity, transference number, and diffusivity are also crucial factors for low‐temperature Li deposition behavior. Superior Li metal reversibility was observed within the combination of the solvent with moderately weak solvating power and the diluent with minimal viscosity, highlighting the role of ion transport and the necessity for a trade‐off with desolvation. The optimized electrolyte composed of lithium bis(fluorosulfonyl)imide, methyl n‐propyl ether, and 1,1,2,2‐tetrafluoroethyl methyl ether delivers exceptional Coulombic efficiency of 99.34 % at −40 °C and 98.96 % at −60 °C under a current density of 0.5 mA cm−2. Furthermore, Li||LiCoO2 (2.7 mAh cm−2) cells demonstrate impressive reversible capacity and cycling stability at these temperatures. This work sheds light on the less‐recognized relevance of bulk ion transport to low‐temperature performance and provides guidelines for the electrolyte design of Li metal batteries operating in cold environments. [ABSTRACT FROM AUTHOR]

The objective of this study was to create artificial enzymes that capitalize on pnictogen bonding, a σ‐hole interaction that is essentially absent in biocatalysis. For this purpose, stibine catalysts were equipped with a biotin derivative and combined with streptavidin mutants to identify an efficient transfer hydrogenation catalyst for the reduction of a fluorogenic quinoline substrate. Increased catalytic activity from wild‐type streptavidin to the best mutants coincides with the depth of the σ hole on the Sb(V) center, and the emergence of saturation kinetic behavior. Michaelis–Menten analysis reveals transition‐state recognition in the low micromolar range, more than three orders of magnitude stronger than the millimolar substrate recognition. Carboxylates preferred by the best mutants contribute to transition‐state recognition by hydrogen‐bonded ion pairing and anion‐π interactions with the emerging pyridinium product. The emergence of challenging stereoselectivity in aqueous systems further emphasizes compatibility of pnictogen bonding with higher order systems catalysis. [ABSTRACT FROM AUTHOR]

The singlet fission characteristics of aqueous nanoparticles, self‐assembled from ion pairs of tetracene dicarboxylic acid and various amines with or without chirality, are thoroughly investigated. The structure of the ammonium molecule, the counterion, is found to play a decisive role in determining the molecular orientation of the ion pairs and its regularity, spectroscopic properties, the strength of the intermolecular coupling between the tetracene chromophores, and the consequent singlet fission process. Using chiral amines has led to the formation of crystalline nanosheets and efficient singlet fission with a triplet quantum yield as high as 133% ±20% and a rate constant of 6.99 × 109 s−1. The chiral ion pairs also provide a separation channel to free triplets with yields as high as 33% ±10%. In contrast, nanoparticles with achiral counterions do not show singlet fission, which gave low or high fluorescence quantum yields depending on the size of the counterions. The racemic ion pair produces a correlated triplet pair intermediate by singlet fission, but no decorrelation into two free triplets is observed, as triplet‐triplet annihilation dominates. The introduction of chirality enables higher control over orientation and singlet fission in self‐assembled chromophores. It provides new design guidelines for singlet fission materials. [ABSTRACT FROM AUTHOR]

Achieving precise selective separation of monovalent and divalent cations, as well as anions, is vital yet challenging in practical applications involving complex component treatments. Current membranes are typically effective for separating either cation pairs or anion pairs. To address this issue, a straightforward strategy for fabricating a nanofiltration (NF) membrane is developed that selectively permeates monovalent ions. This study focused on neutralizing the surface charge and tuning the pore size distribution of the polyamide membranes through a secondary interfacial polymerization using a zwitterionic copolymer consisting of 2‐methacryloyloxyethyl phosphorylcholine and 2‐aminoethyl methacrylate hydrochloride. The optimized NF membrane prepared in this study, with a near‐neutrally charged membrane surface and appropriate pore size distribution, demonstrates favorable performance in precisely separating monovalent and divalent ions, irrespective of the ion charge sign. The optimum NF membrane features high selectivity for both Cl−/SO42− (93) and Li+/Mg2+ (67) ion pairs, along with high water permeance of 8.5 L m−2 h−1 bar−1, making it competitive with many reported membranes. This study offers new insights into the ion‐selective mechanisms of polyamide membranes for monovalent/divalent ions and may guide the development of advanced membranes with single‐solute selectivity. [ABSTRACT FROM AUTHOR]

Coefficients of activity of alkali metal fluorides at 298 K in aqueous solutions are calculated according to the generalized Debye–Hückel theory using experimental values of the static dielectric constant of solutions. It is shown that calculations without optimized model parameters reproduce the nonmonotonic concentration dependence of the coefficients of activity. The dependence of the coefficients of activity on the radius of a cation is explained by the weakening of ionic association as the radius grows. [ABSTRACT FROM AUTHOR]

Ectoine (ECT) has recently gained considerable interest in the healthcare sector due to its promising therapeutic benefits in a variety of human disorders. This research aimed to quantify the ECT plasma level in rats by creating and optimizing a sensitive and validated UPLC-MS/MS method. Prior to analysis, ECT extraction from the plasma samples was conducted via a protein precipitation procedure, using hydroxyectoine as an internal standard (IS). A 1.7 μm UPLC C8 column (100 mm × 2.1 mm) was selected for the chromatographic separation, using a gradient mobile phase consisting of acetonitrile and 0.05% formic acid. The electrospray ionization mass spectrometry (ESI-MS) was used to detect ECT in the positive ion mode. To determine the specific precursor and the product ions of ECT, multiple reaction monitoring (MRM) methods were carried out. The selected ion pair of ECT was 143.1 > 97 and 159.1 > 113.13 for the IS. The ECT's linearity range in rat plasma was found to be 1-1000 ng/mL, with a recovery rate of 96.48–97.37%. Consistent with FDA guidelines for bio-analytical method validation, the suggested method was validated. The method was efficiently employed to quantify the studied drug in spiked rat plasma with good accuracy and precision with no significant matrix effects. Furthermore, it was effectively used to investigate the pharmacokinetic behavior of ECT in rats after a single oral dose of 30 mg/kg. [ABSTRACT FROM AUTHOR]

ABSTRACT Ratiometric optical detection of analytes is a convenient strategy as the technique is devoid of relative error and background correction. Herein, solvent‐guided ratiometric optical recognition of fluoride and bisulfate anions by a low‐cost, “off‐the‐shelf” bioactive molecule, harmane (HRH) is thoroughly explored. Interestingly, solvent plays a dynamic role in the selective recognition of the dual anions via the dual channels of HRH in an intelligent manner. The probe displays high‐fidelity recognition behavior towards fluoride ion in an aprotic solvent (acetonitrile) and towards bisulfate ion in a protic environment (acetonitrile/water; 5:1; v/v). Both the channels of HRH are very selective for a particular anion (F−/HSO4−) in a specific solvent. Organized and comprehensive theoretical calculation denotes that hydrogen bonding between the acidic pyrrolic proton of HRH and fluoride for the first channel and the acidic proton of bisulfate and the pyridinic nitrogen for the second channel of HRH led to the formation of a hydrogen‐bonded ion pair (HBIP). Consequently, significant optical changes are observed in the visible region, which is convenient for real‐life detection of F− and HSO4− independently. The essential role of solvent in tuning the dual channels of HRH is an important artifact in the literature of fundamental photochemistry. [ABSTRACT FROM AUTHOR]

Background: Patients with burn scars require effective treatments able to alleviate dry skin and persistent itching. Ion pairing has been employed in cosmetic formulations to enhance solubility in solvents and improve skin permeability. To evaluate the efficacy and safety of the cosmetic formula "RE:pair (arginine–glutamate ion pair)", we analyzed scar size, itching and pain, skin barrier function, scar scale evaluation, and satisfaction in our study participants. Methods: A total of 10 patients were recruited, and the formula was used twice a day for up to 4 weeks. Results: Itching was significantly alleviated after 4 weeks of treatment (95% CI = −0.11–1.71) compared to before application (95% CI = 2.11–4.68). Transepidermal water loss (TEWL) showed an 11% improvement after 4 weeks (95% CI = 3.43–8.83) compared to before application (95% CI = 3.93–9.88), and skin coreneum hydration (SCH) showed a significant 41% improvement after 4 weeks (95% CI = 43.01–62.38) compared to before application (95% CI = 20.94–40.65). Conclusions: Based on the confirmation that RE:pair improves skin barrier function and relieves itching, it is likely to be used as a topical treatment for burn scars pending evaluation in follow-up studies (IRB no. HG2023-016). [ABSTRACT FROM AUTHOR]

It has been suggested that the line width of ions in molecular clouds is narrower than that of the co-existing neutral particles, which has been interpreted as an indication of the decoupling of neutral turbulence from magnetic fields within a partially ionized environment. We calculate the principal component analysis (PCA) correlation coefficients of CCH versus H |$^{13}$| CO |$^{+}$| and H |$^{13}$| CN versus H |$^{13}$| CO |$^{+}$|⁠. We find aside from H |$^{13}$| CN, CCH could also be strongly spatial correlated with H |$^{13}$| CO |$^{+}$| in high-mass star-forming regions. CCH and H |$^{13}$| CO |$^{+}$| line emissions are strongly spatial correlated with each other in 48 per cent sources with a PCA correlation coefficient over 0.7. So, we investigate the ambipolar diffusion (AD) effect using CCH and H |$^{13}$| CO |$^{+}$| lines as a neutral/ion pair in a sample of 129 high-mass star-forming clumps. We conduct a careful analysis of line widths of the CCH–H |$^{13}$| CO |$^{+}$| pair pixel-by-pixel in 12 sources, which show a strong correlation in CCH–H |$^{13}$| CO |$^+$| emission and no obvious outflows or multiple velocity components. The mean velocity dispersion of CCH is about the same as H |$^{13}$| CO |$^{+}$| in 12 sources. In low-density regions of most sources, CCH shows a broader velocity dispersion than H |$^{13}$| CO |$^{+}$|⁠. However, the AD effect is not significant from a statistical point of view. [ABSTRACT FROM AUTHOR]

Copyright of Afyon Kocatepe University Journal of Science & Engineering / Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi is the property of Afyon Kocatepe University, Faculty of Science & Literature and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The manipulation of hydrogen bonding within protic ionic liquids is conducive to conquering the robust hydrogen bonding interactions in cellulose for its effective dissolution, but it is a great challenge to establish the delicate balance of hydrogen bonding network between solvent and cellulose. Herein, we proposed the concept of "hydrogen bond producers" for urea molecules in 1,1,3,3‐tetramethylguanidinium methoxyacetate acid ([TMGH][MAA]) to enhance the dissolution of cellulose. The optimization of physicochemical properties for [TMGH][MAA] solvent as a function of urea concentration revealed a remarkable increase in cellulose solubility from 13% to 17% (w/w) by adding only 0.25 wt% urea, highlighting the efficiency of [TMGH][MAA] as a powerful solvent for the dissolution of cellulose. The experimental and simulation results verified that the significant improvement on dissolution of cellulose was attributed to the hydrogen bonding interaction of urea molecules with ion pairs and part of free ions, reducing the interference with the active ions bonded to cellulose. Furthermore, the considerable enhancement on comprehensive properties of regenerated cellulose films demonstrated the effectiveness of [TMGH][MAA]/urea solvent. The concept of "hydrogen bond producers" presented here opens a new avenue for significantly enhancing the dissolution of natural cellulose, promoting the sustainable development in large‐scale processing of cellulose. [ABSTRACT FROM AUTHOR]

Aiming at the problems of low oxygen utilization rate and slow dissolution of sphalerite in the pressure leaching process of zinc concentrate, the strong oxidizability of Fe3+ in zinc leaching residue and the oxygen transport efficiency of Fe2+/Fe3+ redox ion pair were used to improve the efficient oxidation of S2- in sphalerite and the utilization rate of O2, so as to realize the synergistic enhanced leaching of zinc concentrate and zinc leaching residue. The results show that Fe3+ can improve the solubility of oxygen, and the back-and-forth valence behavior of Fe2+/Fe3+ accelerates the oxidative dissolution of sphalerite (ZnS) in the leaching system, and the leaching rate and leaching efficiency of zinc are significantly improved. Under the optimal process conditions of initial sulphuric acid concentration of 95 g/L, oxygen partial pressure of 0.8 MPa, temperature of 160 °C, reaction time of 120 min, and pH value of 3, and the addition of 6.1 g/L Fe3+ in the form of zinc leaching residue results in a high leaching rate of 98.60% of zinc, and 92.47% of iron is precipitated into the residue. The synergic Caching of zinc concentrate and zinc leaching residue is controHed by external diffusion with apparent activation energy of 15.61 kj/mol. The kinetic equation of synergc Caching process Is as follows; 1-(1-a)1/3=4.78X 10-3 X {[exp(-15610/8.314T)] Xc(H2SO4)1,21 XP(O2)0.33 Xc(Fe3+)0.43Xt} . [ABSTRACT FROM AUTHOR]

Copyright of Baghdad Science Journal is the property of Republic of Iraq Ministry of Higher Education & Scientific Research (MOHESR) and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Catalyst‐controlled diversity‐oriented synthesis (CatDOS) is an important research area for expanding molecular complexities and achieving high atomic economics. Many regiodivergent syntheses have been achieved through metal catalysis, covalent organocatalysis, and non‐covalent organocatalysis by controlling the molecular recognition function of the catalysts. However, the development of regiodivergent CatDOS through Brønsted base organocatalysis was relatively less developed than others so far. Numerous studies about Brønsted base organocatalysis have demonstrated the powerful molecular recognition abilities of their cationic conjugate acids mainly in controlling the stereoselectivity instead of the regioselectivity. This concept review aims to conceptualize a new perspective to consider the potential role of the cationic conjugate acid of Brønsted bases for regiodivergent CatDOS. Recent representative examples are selected to demonstrate the potential of cationic conjugate acids in site‐selectivity control in single bond and multiple bonds formation reactions. The summarized results show that even the conjugate acid of common tertiary amines, protic ammonium ions, could affect the regioselectivity in the early‐ or late‐stage step during multiple bonds formation after initial deprotonation. The results also suggested that the properties and ion‐pairing interactions of conjugate acid could be more important than the basicity of the base in controlling regioselectivity. Perspectives and hypotheses for explaining the mechanism of regioselectivity are also included in this review. [ABSTRACT FROM AUTHOR]

The lanthanide (Ln) elements are critical materials that are typically extracted/mined together. Their separation by use of solvent extraction from acidic media is well known; however, there are few studies in basic media with carbonate anions. We investigated the complexation of Eu(III) and Tb(III) carbonates as solids and solutions in alkaline K2CO3, wherein we sought to access a Tb(IV) carbonate complex through ozonolysis. L3‐edge XANES of Eu and Tb carbonate solids, colorless solutions, and a red‐hued Tb solution (obtained by ozonolysis) all showed Ln(III) cations. The absence of evidence for a Tb(IV) complex was confirmed through XAS and EPR analyses, despite the solution exhibiting a deep red color. For solids and solutions, EXAFS results indicate molecular Ln(III)‐carbonato anions. In terms of the Eu(III) carbonate coordination number, the coordination does not change upon dissolution of the solid sample. Furthermore, EXAFS for the solutions revealed evidence for the association of potassium cations with the Ln(III)‐carbonato anions. This direct observation of contact ion pairing by EXAFS at room temperature is rare. The insights into Ln(III) carbonate complexation and solution speciation afforded by XANES‐EXAFS, FT‐IR, and EPR provides perspectives that serve as benchmarks for future computational and experimental efforts focused on caustic‐side solvent extraction of Ln(III) ions. [ABSTRACT FROM AUTHOR]

Plastics redesign for circularity has primarily focused on monomer chemistries enabling faster deconstruction rates concomitant with high monomer yields. Yet, during deconstruction, polymer chains interact with their reaction medium, which remains underexplored in polymer reactivity. Here, we show that, when plastics are deconstructed in reaction media that promote swelling, initial rates are accelerated by over sixfold beyond those in small-molecule analogs. This unexpected acceleration is primarily tied to mechanochemical activation of strained polymer chains; however, changes in the activity of water under polymer confinement and bond activation in solvent-separated ion pairs are also important. Together, deconstruction times can be shortened by seven times by codesigning plastics and their deconstruction processes. [ABSTRACT FROM AUTHOR]

Carbon-based molecules are of universal importance for a huge variety of chemical and biological processes. The complication of the structure of such molecules proceeds via the bonding of carbon atoms. An efficient mechanism for such reactions proceeds via cross-coupling, related to the association of bond-terminating counter-ions. Here, an uncommon version of such a process is investigated, with at least some ions bound in the system noncovalently and/or switching the bonding mode in due course. The analyzed sample reactions involve a single C-C bond formation in environmentally relevant halocarbon species and involve alkali–halide ion-pair components. A consistent ab initio computational study predicts the related energy barriers to alter significantly in the presence of the ion pair. Different channels are checked, with the carbon–halogen bond cleavage preceding or following the actual C-C bonding and with the counter-ions located closely or farther apart. The relative heights of the corresponding energy barriers are found to be switched by the ion pair. The above results suggest a possibility of facilitating such reactions without expensive catalysts. [ABSTRACT FROM AUTHOR]

Constructing organic composite materials through molecular recognition has emerged as an important theme in materials science. Here we report an ion‐pair recognition system involving the use of a propoxylated pillar[5]arene (PrP5) to modulate the solid‐state photophysical properties of dye trans‐4'‐(dimethylamino)‐N‐methyl‐4‐stilbazolium hexafluorophosphate (DMASP). Single crystal X‐ray diffraction analysis reveals that the dye guest DMASP is encapsulated by PrP5 to form a 2 : 1 host−guest complex 2PrP5⸧DMASP in the crystalline state. The macrocyclic skeleton of PrP5 imposes restrictions on the intramolecular motions of the dye guest, leading to a significant enhancement of its fluorescence emission. Additionally, within the 2PrP5⸧DMASP complex crystal structure, DMASP molecules are found to display two possible opposite orientations in the one‐dimensional channels formed by PrP5 molecules. This arrangement is believed to alter the overall solid‐state packing structure of DMASP, thereby activating its nonlinear optical activity. This work not only reports a novel ion‐pair molecular recognition system based on pillararenes but also provides valuable insights into the modulation of the crystalline state photophysical properties of organic dyes via cocrystal engineering. [ABSTRACT FROM AUTHOR]

Stream water chemistry at catchment outlets is commonly used to infer flow paths of water through catchments and to quantify the relative contributions of various flow paths and/or end-members, especially during storm events. For this purpose, the number and nature of these flow paths or end-members are commonly determined with principal component analysis based on all available conservative solute data in inverse end-member mixing analyses (EMMAs). However, apart from the selection of conservative solutes, little attention is paid to the number and choice of the solutes that are included in the analysis, despite the impact this choice can have on the interpretation of the results from an inverse EMMA. Here, we propose a methodology that tries to fill this gap. For a given pair of measured solutes, the proposed methodology determines the minimum number of required end-members, based on the synchronous variation of the solutes during storm events. This allows identification of solute pairs for which a simple two-end-member mixing model is sufficient to explain their variation during storm events and of solute pairs, which show a more complex pattern requiring a higher-order end-member mixing model. We analyse the concentration–concentration relationships of several major ion pairs on the storm-event scale, using multi-year, high-frequency (< 60 min) monitoring data from the outlet of two small (0.8 to 5 km 2) French catchments with contrasting land use, climate, and geology. A large number of storm events (56 % to 79 %) could be interpreted as being the result of a mixture of only two end-members, depending on the catchment and the ion pairs used. Even though some of these results could have been expected (e.g. a two-end-member model for the Na +/Cl- pair in a catchment close to the Atlantic coast), others were more surprising and in contrast to previous studies. These findings might help to revise or improve perceptual catchment understanding of flow path or end-member contributions and of biogeochemical processes. In addition, this methodology can identify which solute pairs are governed by identical hydro-biogeochemical processes and which solutes are modified by more complex and diverse processes. [ABSTRACT FROM AUTHOR]

The significance of small molecule metabolites as biomarkers for disease diagnosis and prognosis is growing increasingly evident, necessitating the development of highly sensitive qualitative and quantitative methods. Herein, multi‐chemoselective probes are synthesized and applied for profiling metabolites, including carboxyl, phosphate, hydroxyl, amino, thiol, and carbonyl compounds. This approach seamlessly integrates magnetic solid‐phase materials, orthogonal cleavage sites, isotopic tags, and selective coupling sites, minimizes matrix interference, and enhances quantitative accuracy. Meanwhile, a homemade program, High‐Resolution Isotope‐Assisted Identification and Quantitative (HRIAIQuant) is developed to process the data, which adeptly filters through 33,874 ion pairs present in human serum, leading to the identification of 701 known metabolites and a remarkable 1,062 potential novel ones. This method is successfully applied to analyze metabolites in multiple brain regions of SAMP8 and SAMR1 models, offering a novel tool for Alzheimer's disease research. [ABSTRACT FROM AUTHOR]

Deep eutectic electrolytes offer opportunities for tailoring solvation structure and interface chemistry in advanced batteries, but developing deep eutectic electrolytes for high‐performance zinc ion batteries (ZIBs) remains a challenge. Herein, multifunctional dual‐metal‐salt derived ternary eutectic electrolytes (DMEEs) are designed via a supporting salt strategy for dendrite‐free and long‐lifespan ZIBs. DMEEs are constructed by zinc trifluoromethanesulfonate (Zn(OTF)2), supporting salt of lithium bis(trifluoromethanesulfonyl)imide, and neutral ligand of N‐methylacetamide. Noticeably, supporting salt with weak lattice energy not only induces the reconstruction of intermolecular interactions to form ion pairs and ion aggregates but also tailors the Zn2+ solvation structure and solid electrolyte interface (SEI). The developed DMEEs possess a dual‐anion‐rich Zn2+ solvation shell and induce an inorganic‐rich hybrid SEI, which effectively suppresses side reactions and obtains a dendrite‐free Zn anode with high reversibility. Remarkably, Zn//Zn cells demonstrate cycling stability for over 3000 h, and Zn//PANI full cells deliver no significant capacity decay after 5000 cycles at a high current density of 5 A g−1. This work opens a new avenue to design advanced deep eutectic electrolytes, and the deep understanding of solvation structure and SEI offers guidelines for developing high‐performance batteries. [ABSTRACT FROM AUTHOR]

Fluorofluorophores are a unique class of fluorophores that can be solubilized in perfluorocarbons (PFCs) and used to study biological systems. However, because of the low dielectric constant and high oxygen solubility in the fluorous phase, the brightness and photostability of the fluorofluorophores are significantly diminished. Here, we leveraged the tight ion pairing in the fluorous phase to improve the photophysical properties of a fluorous soluble pentamethine dye (FCy5) via counterion exchange. We found that larger, softer, fluorinated, aryl borate counterions promote the ideal polymethine state where charge delocalization across the polymethine chain increases the brightness (6‐fold) and photostability (55‐fold) of FCy5. [ABSTRACT FROM AUTHOR]

A new stability‐indicating RPHPLC method with short run time has been developed and validated for tofacitinib citrate and its related substances. The novel HPLC method integrates hydrophilic interaction liquid chromatography (HILIC) technology as the stationary phase and employs a mobile phase composed of phosphate buffer (pH 7.0) and acetonitrile (45:55, %v/v) at a flow rate of 0.5 mL/min under isocratic elution. Analytes were monitored via a UV detector at 210 nm and with the column oven temperature at 30°C for a 20‐min analysis. Precision (%RSD) for Impurity‐A and Impurity‐B and tofacitinib met specifications at 2.4%, 0.8%, and 0.0%, respectively. Accuracy ranged from 86% to 100% for impurities, with LOD at 0.03% and LOQ at 0.05%–0.06%. Correlation coefficients exceeded 0.999 for impurities and tofacitinib citrate. Solution stability was confirmed for 24 h at room temperature. The method range was extended from LOQ to ∼1.5% for impurities and LOQ to ∼150% for tofacitinib citrate. The method's stability was evaluated under acid and base hydrolysis, oxidative and water hydrolysis, and thermal and photolytic degradation. Introducing HILIC as the stationary phase for this work proved effective, eliminating the need of ion pair reagents, reducing analysis time, and ensuring consistent results. [ABSTRACT FROM AUTHOR]

In this work, we investigate the ion pair tetramethylphosphonium cation, [P1,1,1,1]+, and bis(oxalato)borate anion, [BOB]−, as a model system for the study of ionic liquids interacting with both hydroxylated and oxygen terminated α-SiO2 (001) surfaces, using first-principles electronic structure theory. We use a single ionic pair and clusters of ion pairs, in order to have exclusively neutral supercell slab models. We use dispersion-corrected density functional theory (DFT) to ascertain that both the strong physical binding between the ions, dominated by ionic binding, and the weaker physical binding of ions to the different surfaces are correctly described. We have found that the binding of ion pairs is stronger to the hydroxylated α-SiO2 (001) surface compared to the oxygen terminated surface, which is attributed to the formation of H-binding with the oxygen atom(s) of the [BOB]− anion. Through rotation of ionic pair(s), we estimate the surface-ions energy barrier for translational movement and, thus, the strength of H-binding of the ions. At the surface of hydroxylated α-SiO2 (001), we have studied how water molecules form a network of H-binding with the OH groups of the surface and the [BOB]− anion, which offers an explanation for the reduction in the friction of ionic liquids on the inclusion of water. We suggest modeling protocols for simulation of ion pairs on surfaces, which can open up the possibility to use DFT to aid in designing and understanding the physicochemical mechanism of interactions of ionic materials (including ionic liquids) in various technological applications. [ABSTRACT FROM AUTHOR]

Novel and sensitive analytical technique was proposed for estimating perindopril (angiotensin-converting enzyme (ACE) inhibitor) in formulations using acidic dye as chromogenic reagent. The study was established on the development of colour species formation between perindopril erbumine and chromogenic reagent such as azocarmine G (ACG). Proposed method consists formation of an ion-pair association complex with azocarmine-G. The optical density was measured at λmax of 540 nm. Regression analysis of proposed method showed that the linearity lies within the concentration limits of 20-100 µg mL-1. Molar absorptivity (∈max) values of developed method are found to be as 3.22 x 10Á L mol-1 cm-1. Investigated method was found to have linear correlation coefficient (r) value of 0.9999. Proposed method obeyed Lambert-Beer' law with reproducible results. Percentage recovery was found to be within the limits of 99.7 - 100.1 (± 0.41 SD, ± 0.57 SD). All the parameters were validated statistically. [ABSTRACT FROM AUTHOR]

The treatment landscape for opioid use disorder (OUD) faces challenges stemming from the limited efficacy of existing medications, poor adherence to prescribed regimens, and a heightened risk of fatal overdose post-treatment cessation. Therefore, there is a pressing need for innovative therapeutic strategies that enhance the effectiveness of interventions and the overall well-being of individuals with OUD. This study explored the therapeutic potential of nor-Levo-α-acetylmethadol (nor-LAAM) to treat OUD. We developed sustained release nor-LAAM-loaded poly (lactic- co -glycolic acid) (PLGA) microparticles (MP) using a hydrophobic ion pairing (HIP) approach. The nor-LAAM-MP prepared using HIP with pamoic acid had high drug loading and exhibited minimal initial burst release and sustained release. The nor-LAAM-MP was further optimized for desirable particle size, drug loading, and release kinetics. The lead nor-LAAM-MP (F4) had a relatively high drug loading (11 wt%) and an average diameter (19 μm) and maintained a sustained drug release for 4 weeks. A single subcutaneous injection of nor-LAAM-MP (F4) provided detectable nor-LAAM levels in rabbit plasma for at least 15 days. We further evaluated the therapeutic efficacy of nor-LAAM-MP (F4) in a well-established fentanyl-addiction rat model, and revealed a marked reduction in fentanyl choice and withdrawal symptoms in fentanyl-dependent rats. These findings provide insights into further developing long-acting nor-LAAM-MP for treating OUD. It has the potential to offer a new effective medication to the existing sparse armamentarium of products available to treat OUD. [Display omitted] [ABSTRACT FROM AUTHOR]

The title complex, (1,4,7,10,13,16-hexaoxacyclooctadecane-1κ6O)(μ-oxalato-1κ²O¹,O²:2κ²O1′,O2′)triphenyl-2κ³C-potassium(I)tin(IV), [KSn(C6H5)3(C2O4)(C12H24O6)] or K[18-Crown-6][(C6H5)3SnO4C2], was synthesized. The complex consists of a potassium cation coordinated to the six oxygen atoms of a crown ether molecule and the two oxygen atoms of the oxalatotriphenylstannate anion. It crystallizes in the monoclinic crystal system within the space group P21. The tin atom is coordinated by one chelating oxalate ligand and three phenyl groups, forming a cis-trigonal–bipyramidal geometry around the tin atom. The cations and anions form ion pairs, linked through carbonyl coordination to the potassium atoms. The crystal structure features C—H⋯O hydrogen bonds between the oxygen atoms of the oxalate group and the hydrogen atoms of the phenyl groups, resulting in an infinite chain structure extending along a-axis direction. The primary inter-chain interactions are van der Waals forces. [ABSTRACT FROM AUTHOR]

Comprehensive Summary: The development of catalytic asymmetric methods that enable access to value‐added functionalities or structures, exemplified by allylic alcohols, is a highly interesting yet challenging topic from both academic and industrial perspectives. However, before recent advances in chemical catalysis, there were scarce protocols toward constructing enantioenriched tertiary allylic alcohol scaffolds. In this context, peptide‐mimic phosphonium salts were found to be highly efficient in catalytic asymmetric α‐hydroxylation of α,β‐unsaturated and/or β,ϒ‐unsaturated compounds with satisfactory regio‐ and stereochemical outcomes (up to 97% yield and 95% ee). This methodology tolerates a broad array of substrates and thus provides an expeditious and unified platform for the assembly of enantioenriched tertiary allylic alcohols by avoiding the use of additional reductants and expensive metal catalysts. Furthermore, the power of this protocol is enlarged by simple conditions and the use of air as a source of hydroxyl functionality. [ABSTRACT FROM AUTHOR]

[Display omitted] Hydrophilic cationic drugs such as mitoxantrone hydrochloride (MTO) pose a significant delivery challenge to the development of nanodrug systems. Herein, we report the use of a hydrophobic ion-pairing strategy to enhance the nano-assembly of MTO. We employed biocompatible sodium cholesteryl sulfate (SCS) as a modification module to form stable ion pairs with MTO, which balanced the intermolecular forces and facilitated nano-assembly. PEGylated MTO-SCS nanoassemblies (pMS NAs) were prepared via nanoprecipitation. We systematically evaluated the effect of the ratio of the drug module (MTO) to the modification module (SCS) on the nanoassemblies. The increased lipophilicity of MTO-SCS ion pair could significantly improve the encapsulation efficiency (∼97 %) and cellular uptake efficiency of MTO. The pMS NAs showed prolonged blood circulation, maintained the same level of tumor antiproliferative activity, and exhibited reduced toxicity compared with the free MTO solution. It is noteworthy that the stability, cellular uptake, cytotoxicity, and in vivo pharmacokinetic behavior of the pMS NAs increased in proportion to the molar ratio of SCS to MTO. This study presents a self-assembly strategy mediated by ion pairing to overcome the challenges commonly associated with the poor assembly ability of hydrophilic cationic drugs. [ABSTRACT FROM AUTHOR]

Copyright of Science & Technology of Food Industry is the property of Science & Technology of Food Industry Editorial Office and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The development and validation of two uncomplicated, selective, and non-extraction-based visible spectrophotometric methods was carried out for the quantification of a tricyclic antidepressant amitriptyline hydrochloride as pharmaceutical tablets as well as in its pure form. The methods rely on the formation of ion pair complexes between amitriptyline base and two acidic dyes, bromothymol blue and bromocresol purple, which were subsequently measured at 410 and 400 nm, respectively. The developed methods included numerous reaction variables that were examined and improved. Beer's law is applicable under optimal conditions for the bromothymol blue and bromocresol purple methods, respectively, over concentrations from 0.5 to 12.5 μg mL−1 and from 0.5 to 10.0 μg mL−1 amitriptyline hydrochloride. The computed values of molar absorptivity were 1.79 × 104 and 2.32 × 104 L.mol−1.cm−1 for bromothymol blue and bromocresol purple methods, respectively, with Sandell's sensitivity values of 0.0155 and 0.0119 μg cm−2. Both detection limits and quantification limits were computed and determined to be 0.55 and 1.67 μg mL−1 for bromothymol blue method, and 0.49 and 1.49 μg mL−1 for bromocresol purple method, respectively. The developed methods were successfully applied to estimate the concentration of amitriptyline hydrochloride in bulk form and commercial pills. Therefore, these methods demonstrate promising potential for testing this drug in labs for quality control. Spectrophotometric quantification of amitriptyline hydrochloride in pharmaceutical tablets: method development and validation [ABSTRACT FROM AUTHOR]

Sample preparation is the first and most important step of analytical methods, especially for the analysis of complex matrices such as soil. A new and simple microextraction method termed solvent bar microextraction (SBME) was able to provide good results in terms of precision, accuracy, selectivity, and enrichment factor. Here, for the first time, a new analytical method based on ion-pair solvent bar microextraction (IP-SBME) in combination with UV–Visible spectrophotometry was introduced for the simple determination of paraquat (PQ) in soil samples. In this two phase process, an anionic surfactant was added initially into the donor solution to form a hydrophobic ion pair with the cationic analyte. Thereupon, the ion pair formed was enriched into organic solvent immobilized in the pores and lumen of the hollow fiber (HF) and finally back washed with methanol. Significant parameters affecting the proposed method were optimized as pH 6, concentration of SDS 5 mM, stirring rate of 500 rpm, time of extraction 15 min, without addition of salt. Under the optimized extraction conditions, the method showed a good linear dynamic range (1–2000 μgL−1) with a lower limit of detection (0.3 μgL−1) and excellent preconcentration factor (PF = 355.34). Finally, the proposed method was successfully applied for the determination of PQ in soil samples. [ABSTRACT FROM AUTHOR]

Ion pairs of N-(2,6-dimethylphenyl)-substituted triazatriangulenium (TATA+) cation with various counteranions were synthesized to investigate the interactions for the bulky cation. Single-crystal X-ray analysis of the TATA+ ion pairs revealed solid-state ion-pairing assemblies without stacking at the cationic π-planes. The TATA+ cation showed counteranion-dependent assembly structures, with smaller counteranions located at the top of TATA+ and bulkier counteranions displaced from the TATA+ plane to interact with the surrounding TATA+.

A comprehensive genetic algorithm is used to perform a global search for Cl−(H2O)1–9 and NaCl(H2O)1–9. The structural optimization, energy calculations, vibrational characteristics, and charge distribution were performed at an ab initio high-level theory. Combined with the calculation results of Na+(H2O)1–6 by Wang et al. [Front. Chem. 7, 624 (2019)] in our group, we systematically investigate these three systems at the same theoretical level. A comparison of bond lengths reveals that in Cl−(H2O)n, the inclusion of Na+ to form NaCl(H2O)n reduces the average distance between Cl− and H2O, indicating that Na+ has a stabilizing effect on ionic hydrogen bonds. Conversely, in Na+(H2O)n, the introduction of Cl− weakens the interactions between Na+ and H2O. In the NaCl(H2O)1–9 structures searched by the genetic algorithm, the ground-state configurations correspond to contact ion pairs, and the solvent-separated ion pair structures appear when n = 7. Furthermore, the anharmonic corrected infrared spectra of Cl−(H2O)1–5 and NaCl(H2O)1–4 exhibit good agreement with the experimental results. According to charge analysis of NaCl(H2O)n, it is observed that charge transfer primarily occurs from Cl− to H2O, resulting in the presence of negative charges on the water molecules. These findings are helpful to understand the effects of Na+ and Cl− on hydrated clusters at the molecular level. [ABSTRACT FROM AUTHOR]

[Display omitted] Eu2+-doped near-infrared (NIR) emitting phosphors, known for their high efficiency, broadband emission and spectral tunability, have gained much attention. However, achieving efficient NIR emission based on Eu2+ remains a challenge due to the co-existence of Eu3+, especially in materials (i.e. garnets and apatites) containing trivalent lanthanide cations. In this study, a Eu2+ doped sulfureted NIR-emitting garnet phosphor Ca 3 (Sc, Eu) 2 Si 3 (O, S) 12 : Eu2+ is successfully designed and synthesized. Notably, a strategy for regulating the initial valence state of dopants is proposed by using prepared EuS instead of the conventional Eu 2 O 3 as raw material, enhancing the NIR emission by 135 %. Moreover, a sulfuration strategy is further introduced to enhance the NIR-emitting intensity and internal quantum efficiency by 192 % and 167.8 %, and to improve thermal stability by 154 % at 120 °C. The luminescence origin of the unusual broadband NIR emission is re-examined through chemical unit co-substitution strategy by introducing [Al3+ Hf4+] to replace [Sc3+ Si4+] ion pairs. Meanwhile, the spectral regulation and the performance optimization mechanism are systematically discussed. Finally, a green light pumped NIR LED device with a photoelectric efficiency of 9.43 %@100 mA and output power of 22.74 mW@100 mA is fabricated, showing remarkable potential in nondestructive testing and biomedical imaging applications. [ABSTRACT FROM AUTHOR]

Polyamidoamine (PAMAM) dendrimer/phenylthio acetic acid (PTA) ion pair could be generated when the amino/carboxyl group ratio was 3/7 to 1/9. The chemical shifts on 1H NMR and FT-IR spectra suggested that PTA interacted ionically with PAMAM. The PTA was oxidized to sulfoxide and sulfone by H2O2, evidenced by 1H NMR and FT-IR spectroscopy. The ion pair exhibited upper critical solution temperature (UCST) and air/water interface-active which could decrease upon PTA oxidation. When the medium temperature was higher than the UCST, the substantial release of dye loaded in IPSAM took place in the H2O2 solution. [ABSTRACT FROM AUTHOR]

We present a hydrodynamic theory describing pair diffusion in systems with periodic boundary conditions, thereby generalizing earlier work on self-diffusion [B. Dünweg and K. Kremer, J. Chem. Phys. 99, 6983–6997 (1993) and I.-C. Yeh and G. Hummer, J. Phys. Chem. B 108, 15873–15879 (2004)]. Its predictions are compared with Molecular Dynamics simulations for a liquid carbonate electrolyte and two ionic liquids, for which we characterize the correlated motion between distinct ions. Overall, we observe good agreement between theory and simulation data, highlighting that hydrodynamic interactions universally dictate ion correlations. However, when summing over all ion pairs in the system to obtain the cross-contributions to the total cationic or anionic conductivity, the hydrodynamic interactions between ions with like and unlike charges largely cancel. Consequently, significant conductivity contributions only arise from deviations from a hydrodynamic flow field of an ideal fluid, which is from the local electrolyte structure as well as the relaxation processes in the subdiffusive regime. In the case of ionic liquids, the momentum-conservation constraint additionally is vital, which we study by employing different ionic masses in the simulations. Our formalism will likely also be helpful to estimate finite-size effects of the conductivity or of Maxwell-Stefan diffusivities in simulations. [ABSTRACT FROM AUTHOR]

Nature performs critical physiological functions using a series of structurally and functionally diverse membrane proteins embedded in cell membranes, in which native ion protein channels modify the electrical potential inside and outside the cell membrane through charged ion movements. Consequently, the cell responds to external stimuli, playing an essential role in various life activities, such as nerve excitation conduction, neurotransmitter release, muscle movement, and control of cell differentiation. Supramolecular artificial channels, which mimic native protein channels in structure and function, adopt unimolecular or self‐assembled structures, such as crown ethers, cyclodextrins, cucurbiturils, column arenes, cyclic peptide nanotubes, and metal‐organic artificial channels, in channel construction strategies. Owing to the various driving forces involved, artificial synthetic ion channels can be divided into artificial cation and anion channels in terms of ion selectivity. Cation selectivity usually originates from ion coordination, whereas anion selectivity is related to hydrogen bonding, ion pairing, and anion‐dipole interactions. Several studies have been conducted on artificial cation channels, and several reviews have summarized them in detail; however, the research on anions is still in the initial stages, and related reviews have rarely been reported. Hence, this article primarily focuses on the recent research on anion channels. [ABSTRACT FROM AUTHOR]

The integration of anionic Ti4L6 (L = embonate) cages and π-conjugated coordination cations into ordered structures can produce high-performance nonlinear optical (NLO) materials. More specifically, by employing Ti4L6 cages for assembly with mixed N,N-chelated and P,P-chelated type conjugated organic ligands and Ag+ ions, three cage-based structures have been synthesized and structurally characterized. Among them, an ion pair structure with strong π–π accumulation exhibits a significant third-order NLO response, and an excellent optical limiting effect has been experimentally verified. This work provides a promising material for NLO applications. [ABSTRACT FROM AUTHOR]