Search

Inulin, a widely recognized prebiotic, has diverse applications across various industrial sectors. Although inulin is primarily produced through plant extraction, there is growing interest in enzymatic synthesis as an alternative. The enzymatic production of inulin from sucrose, which yields polymers with degrees of polymerization similar to those of plant-derived inulin, shows potential as a viable replacement for traditional extraction methods. In this study, an inulosucrase from Neobacillus bataviensis was identified, demonstrating a non-processive mechanism specifically tailored for synthesizing inulin with polymerization degrees ranging from 3 to approximately 40. The enzyme exhibited optimal activity at pH 6.5 and 55 °C, efficiently producing inulin with a yield of 50.6%. Ca2+ can improve the activity and thermostability of this enzyme. To enhance catalytic total activity, site-directed and truncated mutagenesis techniques were applied, resulting in the identification of a mutant, T149S, displaying a significant 57% increase in catalytic total activity. Molecular dynamics simulations unveiled that the heightened flexibility observed in three surface regions positively influenced enzymatic activity. This study not only contributes to the theoretical foundation for inulosucrase engineering but also presents a potential avenue for the production of inulin. [ABSTRACT FROM AUTHOR]

Inulin, β-(2→1)-fructan, is a beneficial polysaccharide used as a functional food ingredient. Microbial inulosucrases (ISs), catalyzing β-(2→1)-transfructosylation, produce β-(2→1)-fructan from sucrose. In this study, we identified a new IS (NdIS) from the soil isolate, Neobacillus drentensis 57N. Sequence analysis revealed that, like other Bacillaceae ISs, NdIS consists of a glycoside hydrolase family 68 domain and shares most of the 1-kestose-binding residues of the archaeal IS, InuHj. Native and recombinant NdIS were characterized. NdIS is a homotetramer. It does not require calcium for activity. High performance liquid chromatography and 13C-nuclear magnetic resonance indicated that NdIS catalyzed the hydrolysis and β-(2→1)-transfructosylation of sucrose to synthesize β-(2→1)-fructan with chain lengths of 42 or more residues. The rate dependence on sucrose concentration followed hydrolysis–transglycosylation kinetics, and a 50% transglycosylation ratio was obtained at 344 mm sucrose. These results suggest that transfructosylation from sucrose to β-(2→1)-fructan occurs predominantly to elongate the fructan chain because sucrose is an unfavorable acceptor. [ABSTRACT FROM AUTHOR]

Abstract Due to the health-promoting effects and functional properties of inulin-type fructooligosaccharides (I-FOS), the global market for I-FOS is constantly growing. Hence, there is a continuing demand for new, efficient biotechnological approaches for I-FOS production. In this work, crude inulosucrase InuGB-V3 from Lactobacillus gasseri DSM 20604 was used to synthesize I-FOS from sucrose. Supplementation with 1 mM CaCl2, a pH of 3.5–5.5, and an incubation temperature of 40 °C were found to be optimal production parameters at which crude inulosucrase showed high conversion rates, low sucrose hydrolysis, and excellent stability over 4 days. The optimal process conditions were employed in cell-free bioconversion reactions. By elevating the substrate concentration from 570 to 800 g L−1, the I-FOS concentration and the synthesis of products with a low degree of polymerization (DP) could be increased, while sucrose hydrolysis was decreased. Bioconversion of 800 g L−1 sucrose for 20 h resulted in an I-FOS-rich syrup with an I-FOS concentration of 401 ± 7 g L−1 and an I-FOS purity of 53 ± 1% [w/w]. I-FOS with a DP of 3–11 were synthesized, with 1,1-kestotetraose (DP4) being the predominant transfructosylation product. The high-calorie sugars glucose, sucrose, and fructose were removed from the generated I-FOS-rich syrup using activated charcoal. Thus, 81 ± 5% of the initially applied I-FOS were recovered with a purity of 89 ± 1%.

Due to the health-promoting effects and functional properties of inulin-type fructooligosaccharides (I-FOS), the global market for I-FOS is constantly growing. Hence, there is a continuing demand for new, efficient biotechnological approaches for I-FOS production. In this work, crude inulosucrase InuGB-V3 from Lactobacillus gasseri DSM 20604 was used to synthesize I-FOS from sucrose. Supplementation with 1 mM CaCl2, a pH of 3.5–5.5, and an incubation temperature of 40 °C were found to be optimal production parameters at which crude inulosucrase showed high conversion rates, low sucrose hydrolysis, and excellent stability over 4 days. The optimal process conditions were employed in cell-free bioconversion reactions. By elevating the substrate concentration from 570 to 800 g L−1, the I-FOS concentration and the synthesis of products with a low degree of polymerization (DP) could be increased, while sucrose hydrolysis was decreased. Bioconversion of 800 g L−1 sucrose for 20 h resulted in an I-FOS-rich syrup with an I-FOS concentration of 401 ± 7 g L−1 and an I-FOS purity of 53 ± 1% [w/w]. I-FOS with a DP of 3–11 were synthesized, with 1,1-kestotetraose (DP4) being the predominant transfructosylation product. The high-calorie sugars glucose, sucrose, and fructose were removed from the generated I-FOS-rich syrup using activated charcoal. Thus, 81 ± 5% of the initially applied I-FOS were recovered with a purity of 89 ± 1%. [ABSTRACT FROM AUTHOR]

Human beings consume probiotics and prebiotics because of the health benefits they provide. Lactobacillus gasseri is a probiotic microorganism native to humans which produces glycolytic enzymes directed at the hydrolysis of soluble fibers as prebiotic fructans. In this work, levansucrase (LevG) and inulosucrase (InuGB) from L. gasseri were used to predict the ability of L. gasseri to interact with linear and branched fructans prebiotics (inulin and agavins). AlphaFold and SWISS-MODEL were the servers used for tertiary structure prediction of LevG and InuGB, and fructans with different degrees of polymerization (DP2, DP4 DP6, DP8, DP12 and DP20) were used to generate ligandenzyme molecular dockings by AutodockVina, GlycoTorchVina, and Autodock FR software. The best affinity energies obtained by molecular docking were obtained with agavin and inulin with a DP of 6 and 8 units. Aspartic acid, glutamic acid, asparagine and arginin are the main amino acids involved in the interaction with these substrates. At the same time, the binding pocket shows hydrophilic characteristics; GlycoTorchVina was the best software for protein-ligand docking. These results demonstrate the ability of L. [ABSTRACT FROM AUTHOR]

Endophytic bacteria refer to bacteria which promote plant growth via direct and indirect mechanisms. Three endophytic bacteria isolated from Jerusalem artichoke exhibited plant growth induction and inulin production. These bacteria had functions of fructan degradation and synthesis from inulinase and levansucrase, respectively. Rossellomorea aquimaris 3.13 and Priestia megaterium 3.5 obtained inulinase/levanase enzyme with inulin and levan as substrates; enzyme production showed the optimum conditions in 1% inulin medium of 35 °C, pH 7.0. Bacillus velezensis 5.18 and Priestia megaterium 3.5 had inulosucrase/levansucrase enzyme with sucrose as a major carbon source; the enzyme had optimum temperature and pH conditions of 30 °C and pH 7.0, respectively. A combination of carbon sources had effect on decreasing enzyme activity; in addition, co-inoculation of bacteria showed a slight difference in enzyme production compared with single inoculation. The inulosucrase/levansucrase was produced earlier in co-culture containing bacteria with inulinase activity. Plant fructan synthesis was involved in 1-SST and 1-FFT, while 1-FEH encoded inulin degradation; these genes were evaluated in Jerusalem artichoke inoculated with the endophytic bacteria to quantify gene expression level using qPCR. All genes expressed in low levels at early stage of growth, responding to all endophytic bacteria. Significantly, Bacillus velezensis 5.18 induced all genes of the plant at 65 days of inoculation; Rossellomorea aquimaris 3.13 induced 1-FFT while Priestia megaterium 3.5 induced 1-SST. [ABSTRACT FROM AUTHOR]

The experiment was to study the immobilizing condition of inulosucrase. The enzymatic activity of inulosucrase as response value, the immobilizing conditions were optimized by single factor and response surface test. The results showed that optimal conditions of immobilization were as follows: Sodium alginate concentration 2.8%, calcium chloride concentration 3.8%, immobilization time 3.0 h, glutaric dialdehyde concentration 0.035% and cross-linking time 30 min. Using these conditions, the enzymatic activity of immobilized inulosucrase was 78.82 U/g. The experiment indicates that immobilized inulin sucrase has better thermal stability and pH value stability than free enzyme. After 10 cycles, the immobilized enzyme activity still maintained 61.15% of the original enzyme activity. [ABSTRACT FROM AUTHOR]

Inulin has found commercial applications in the pharmaceutical, nutraceutical, and food industries due to its beneficial health effects. The enzymatic biosynthesis of microbial inulin has garnered increasing attention. In this study, molecular modification was applied to Lactobacillus mulieris UMB7800 inulosucrase, an enzyme that specifically produces high-molecular weight inulin, to enhance its catalytic activity and thermostability. Among the 18 variable regions, R5 was identified as a crucial region significantly impacting enzymatic activity by replacing it with more conserved sequences. Site-directed mutagenesis combined with saturated mutagenesis revealed that the mutant A250 V increased activity by 68%. Additionally, after screening candidate mutants by rational design, four single-point mutants, S344D, H434P, E526D, and G531P, were shown to enhance thermostability. The final combinational mutant, M5, exhibited a 66% increase in activity and a 5-fold enhancement in half-life at 55 °C. These findings are significant for understanding the catalytic activity and thermostability of inulosucrase and are promising for the development of microbial inulin biosynthesis platforms.

Several archaea harbor genes that code for fructosyltransferase (FTF) enzymes. These enzymes have not been characterized yet at structure–function level, but are of extreme interest in view of their potential role in the synthesis of novel compounds for food, nutrition, and pharmaceutical applications. In this study, 3D structure of an inulin‐type fructan producing enzyme, inulosucrase (InuHj), from the archaeon Halalkalicoccus jeotgali was resolved in its apo form and with bound substrate (sucrose) molecule and first transglycosylation product (1‐kestose). This is the first crystal structure of an FTF from halophilic archaea. Its overall five‐bladed β‐propeller fold is conserved with previously reported FTFs, but also shows some unique features. The InuHj structure is closer to those of Gram‐negative bacteria, with exceptions such as residue E266, which is conserved in FTFs of Gram‐positive bacteria and has possible role in fructan polymer synthesis in these bacteria as compared to fructooligosaccharide (FOS) production by FTFs of Gram‐negative bacteria. Highly negative electrostatic surface potential of InuHj, due to a large amount of acidic residues, likely contributes to its halophilicity. The complex of InuHj with 1‐kestose indicates that the residues D287 in the 4B‐4C loop, Y330 in 4D‐5A, and D361 in the unique α2 helix may interact with longer FOSs and facilitate the binding of longer FOS chains during synthesis. The outcome of this work will provide targets for future structure–function studies of FTF enzymes, particularly those from archaea. [ABSTRACT FROM AUTHOR]

Information about the inulosucrase of nonlactic acid bacteria is scarce. We found a gene encoding inulosucrase (inuBK) in the genome of the Gram-positive bacterium Alkalihalobacillus krulwichiae JCM 11691. The inuBK open reading frame encoded a protein comprising 456 amino acids. We expressed His-tagged InuBK in culture medium using a Brevibacillus system. The optimal pH and temperature of purified InuBK were 7.0-9.0 and 50-55 °C, respectively. The findings of high-performance anion-exchange chromatography, nuclear magnetic resonance spectroscopy, and high-performance size-exclusion chromatography with multiangle laser light scattering showed that the polysaccharide produced by InuBK was an inulin with a molecular weight of 3806, a polydispersity index (PI) of 1.047, and fructosyl chain lengths with 3-27 degrees of polymerization. The size of InuBK was smaller than commercial inulins, and the PI of the inulin that it produced was lower. [ABSTRACT FROM AUTHOR]

• The general distribution and property of fructosyl-transferases was presented. • Structure, reaction mechanism and product specificity of enzymes were discussed. • A variety of modification to alter the final product profiles was shown. • Application of fructosyl-transferases towards tailor-made product was promising. Carbohydrate-active enzymes are accountable for the synthesis and degradation of glycosidic bonds among diverse carbohydrates. Fructosyl-transferases represent a subclass of these enzymes, employing sucrose as a substrate to generate fructooligosaccharides (FOS) and fructan polymers. This category primarily includes levansucrase (LS, EC 2.4.1.10), inulosucrase (IS, EC 2.4.1.9), and β-fructofuranosidase (Ffase, EC 3.2.1.26). These three enzymes possess a similar five-bladed β-propeller fold and employ an anomer-retaining reaction mechanism mediated by nucleophiles, transition state stabilizers, and general acids/bases. However, they exhibit distinct product profiles, characterized by variations in linkage specificity and molecular mass distribution. Consequently, this article comprehensively explores recent advancements in the catalytic characteristics, structural features, reaction mechanisms, and product specificity of levansucrase, inulosucrase, and β-fructofuranosidase (abbreviated as LS, IS, and Ffase, respectively). Furthermore, it discusses the potential for modifying catalytic properties and product specificity through structure-based design, which enables the rational production of custom fructan and FOS. [ABSTRACT FROM AUTHOR]

Fructan, inulin and levan, have been applied in many industrial fields because of their versatile properties and functions. Recently, microbial fructan has attracted much attention. In this study, a novel inulosucrase from Lactobacillus jensenii JV-V16 was constructed by truncating partial sequence. The truncated inulosucrase was overexpressed, purified and identified. The optimized pH and temperature for transfructosylation were pH 6.0 and 45 °C, respectively. The inulosucrase showed high thermostability and the half-life at 60 °C was 14.5 h. It also exhibited high transfructosylation capability, resulting in a high ratio of transfructosylation activity to hydrolysis activity. After optimizing the conditions of inulin production, 278.4 g/L inulin was obtained from 600 g/L sucrose with an approximately 46% conversion rate from sucrose to inulin. Additionally, acceptor reaction was attempted to explore the transfructosylation capability of the enzyme and some novel saccharides were detected, indicating the potential application in the synthesis of prebiotics. • A novel inulosucrase from L. jensenii JV-V16 was identified. • The enzyme showed high T/H ratios and thermostability. • 278.4 g/L inulin was obtained from 600 g/L sucrose at the optimized conditions. • Novel oligosaccharides were produced by acceptor reaction. [ABSTRACT FROM AUTHOR]

Levan and inulin are two types of fructan. Levan is composed of β-(2, 6) fructosyl linkage and inulin is composed of β-(2, 1) linkage. Both levan and inulin have been accepted and applied in the food, medicinal and chemical industries for their outstanding physicochemical properties in recent years. Microbial levansucrase and inulosucrase are key enzymes responsible for the synthesis of fructan from sucrose. In this review, levansucrase and inulosucrase are discussed together for the first time regarding the evolutionary relationships, bacteria origin, crystal structure, product-forming mechanism and commercial applications. Particularly, some insights into the product specificity about levansucrase and inulosucrase as well as the mechanism for product elongation for fructan are also discussed in the article. [ABSTRACT FROM AUTHOR]

Fructans are fructose-based (poly)saccharides with inulin and levan being the best-known ones. Thanks to their health-related benefits, inulin-type fructans have been under the focus of scientific and industrial communities, though mostly represented by plant-based inulins, and rarely by microbial ones. Recently, it was discovered that some extremely halophilic Archaea are also able to synthesize fructans. Here, we describe the first in-depth functional and molecular characterization of an Archaeal inulosucrase from Halomicrobium sp. IBSBa (HmcIsc). The HmcIsc enzyme was recombinantly expressed and purified in Escherichia coli and shown to synthesize inulin as proven by nuclear magnetic resonance (NMR) analysis. In accordance with the halophilic lifestyle of its native host, the enzyme showed maximum activity at very high NaCl concentrations (3.5 M), with specific adaptations for that purpose. Phylogenetic analyses suggested that Archaeal inulosucrases have been acquired from halophilic bacilli through horizontal gene transfer, with a HX(H/F)T motif evolving further into a HXHT motif, together with a unique D residue creating the onset of a specific alternative acceptor binding groove. This work uncovers a novel area in fructan research, highlighting unexplored aspects of life in hypersaline habitats, and raising questions about the general physiological relevance of inulosucrases and their products in nature.

• HMW inulin enzymatically-synthesized is self-assembled into nanoparticles. • The assemblage of inulin nanoparticles is carried out during enzymatic synthesis. • The inulin forms nanoparticles at a critical aggregation concentration (CAC). • The CAC and nanoparticle size are influenced by the reaction temperature. • The inulin nanoparticles are not toxic for peripheral blood mononuclear cells. Inulin has interesting physicochemical and functional properties, and therefore a wide range of applications in the food and medical industries. It has gained great traction due to its ability to form nanoparticles and its possible application as nanovehicle for drug delivery. In this work, we demonstrated that the enzymatically-synthesized high molecular weight (HMW) inulin forms stable spherical nanoparticles with an average diameter of 112 ± 5 nm. The self-assemblage of HMW inulin nanoparticles is carried out during enzymatic synthesis of the polymer, and become detectable after a certain critical aggregation concentration (CAC) is reached. Both, the CAC and nanoparticle size are influenced by the reaction temperature. These nanoparticles are not toxic for peripheral blood mononuclear cells, at concentrations below 200 μg/mL; no significant prebiotic potential was detected in cultures of 13 probiotic strains. This work contributes to a better understanding of the formation of HMW inulin nanoparticles and their biological properties. [ABSTRACT FROM AUTHOR]

Highlights • Crucial amino acids residues determining fructooligosaccharide chain length on the surface of inulosucrase Lactobacillus reuteri 121. • Insights into how inulosucrase acceptor binding motifs determine fructooligosaccharide chain lengths. • Computational and experimental analysis of acceptor binding motif. • Comparison of inulosucrase and levansucrase oligosaccharide acceptor binding track. Abstract Inulosucrase (E.C. 2.4.1.9) is a bacterial fructosyltransferase that synthesizes inulin-type fructooligosaccharide, using sucrose as a substrate. We modulated the size of fructooligosaccharide synthesized by Lactobacillus reuteri 121 inulosucrase using rational designed mutagenesis. Nine residues: D478, D479, S482, R483, N543, W551, N555, N561 and D689, were changed based on the active site architecture and amino acids potentially interacting with saccharides. The selected residues were substituted with alanine to investigate the contribution of these residues to FOS chain length. Enzymatic activity assays demonstrated that the transglycosylation/hydrolysis ratios of D479A, R483A, N543A, W551A and N555A mutants were significantly different from that of the wild type. Almost all mutants, except D478A, synthesized oligosaccharides with different size distribution compared to that of wild type. Molecular docking further provides insights into the product binding motif of Lactobacillus reuteri 121 inulosucrase and strengthens an important role of amino acid residues at remote locations from the active site on the enzymatic activity and product specificity. [ABSTRACT FROM AUTHOR]

Abstract Inulin, a natural fructan, cannot be hydrolyzed by digestive enzymes in the human body and plays a role as a dietary fiber and prebiotic. Due to its versatile physicochemical properties and physiological functions, inulin has been widely applied in food, pharmaceuticals, and many other fields. The microorganism-derived inulin-forming enzyme inulosucrase (ISase) (EC: 2.1.4.9) can biosynthesize higher-molecular-weight inulin than plants using sucrose as the sole substrate, and the enzyme also shows transfructosylation activity toward other saccharide acceptors. In this article, the properties, functions, and applications of inulin are overviewed. The biosynthesis of inulin by ISase is addressed, including ISase characteristics, structural features, molecular modifications and applications. Highlights • Inulin is important for improving food nutrition and sensory properties. • Inulosucrase (ISase) can be used to biosynthesize high-molecular-weight inulin. • The enzymatic properties of all reported ISases are comprehensively discussed. • The 3D structure, molecular modification and reaction mechanism are discussed. • Applications of inulin and ISases are emphasized. [ABSTRACT FROM AUTHOR]

Inulin, β-(2→1)-fructan, is a beneficial polysaccharide used as a functional food ingredient. Microbial inulosucrases (ISs), catalyzing β-(2→1)-transfructosylation, produce β-(2→1)-fructan from sucrose. In this study, we identified a new IS (NdIS) from the soil isolate, Neobacillus drentensis 57N. Sequence analysis revealed that, like other Bacillaceae ISs, NdIS consists of a glycoside hydrolase family 68 domain and shares most of the 1-kestose-binding residues of the archaeal IS, InuHj. Native and recombinant NdIS were characterized. NdIS is a homotetramer. It does not require calcium for activity. High performance liquid chromatography and 13C-nuclear magnetic resonance indicated that NdIS catalyzed the hydrolysis and β-(2→1)-transfructosylation of sucrose to synthesize β-(2→1)-fructan with chain lengths of 42 or more residues. The rate dependence on sucrose concentration followed hydrolysis-transglycosylation kinetics, and a 50% transglycosylation ratio was obtained at 344 m m sucrose. These results suggest that transfructosylation from sucrose to β-(2→1)-fructan occurs predominantly to elongate the fructan chain because sucrose is an unfavorable acceptor., (© The Author(s) 2023. Published by Oxford University Press on behalf of Japan Society for Bioscience, Biotechnology, and Agrochemistry.)

Inulin is composed of fructose residues connected by β -(2, 1) glycosidic linkages with many promising physiochemical and physiological properties. In this study, an inulin-producing inulosucrase gene from Lactobacillus gasseri DSM 20604 was cloned, expressed and purified. SDS–PAGE and gel filtration found that the recombinant inulosucrase is a monomeric protein with a molecular weight of 63 KDa. The optimal pH for its sucrose hydrolysis and transfructosylation activities was pH 5.5. The optimal temperatures were measured to be 45, 25, and 35 °C for sucrose hydrolysis, transfructosylation, and total activity, respectively. Biosynthesis studies showed that the optimal enzyme dosage was 4.5 U/g sucrose. Higher sucrose concentrations immensely contributed to inulin biosynthesis; the inulin yield reached its maximum after 1.5 h of reaction. Structural analyses of the polysaccharide produced by the recombinant enzyme from sucrose revealed that it is an inulin-type fructan with a molecular weight of 5.858 × 10 6 Da. [ABSTRACT FROM AUTHOR]

Fructooligosaccharides (FOS) and inulin, composed of β-2-1 linked fructose units, have a broad range of industrial applications. They are known to have various beneficial health effects and therefore have broad application potential in nutrition. For (modified) inulin also for non-food purposes more applications are arising. Examples are carboxymethylated inulin as anti-scalant and carboymlated inulin as emulsifiers. Various plants synthesize FOS and/or inulin type of fructans. However, isolating of FOS and inulin from plants is challenging due to for instance varying chains length. There is an increasing demand for FOS and inulin oligosaccharides and alternative procedures for their synthesis are attractive. We identified and characterized two fructosyltransferases from Bacillus agaradhaerens WDG185. FosA, a β-fructofuranosidase, synthesises short chain fructooligosaccharides (GF2-GF4) at high sucrose concentration, whereas InuO, an inulosucrase, synthesises a broad range of inulooligosaccharides (GF2-GF24) from sucrose, very similar to plant derived inulin. FosA and InuO showed activity over a broad pH range from 6 to 10 and optimal temperature at 60 °C. Calcium ions and EDTA were found to have no effect on the activity of both enzymes. Kinetic analysis showed that only at relatively low substrate concentrations both enzymes showed Michaelis-Menten type of kinetics for total and transglycosylation activity. Both enzymes showed increased transglycosylation upon increasing substrate concentrations. These are the first examples of the molecular and biochemical characterization of a β-fructofuranosidase (FosA) and an inulosucrase enzyme (InuO) and its product from a Bacillus agaradhaerens strain. [ABSTRACT FROM AUTHOR]

Inulin has been determined to have many exceptional properties and functions and has been used in the food and pharmaceutical fields. Recently, microbial high-molecular-weight inulin synthesized from sucrose by inulosucrase attracted much attention. In this study, a novel inulosucrase from Lactobacillus mulieris was constructed, overexpressed, purified, and identified. The recombinant enzyme displayed the maximum activity at pH 6.0 and 55 °C, and it exhibited high thermostability below 45 °C. After optimizing the production conditions, the conversion rate from 100 g/L sucrose to inulin reached 31 %, meanwhile, the maximum molecular weight of produced inulin reached 3.21 × 106 g/mol. The truncated IS showed a "processive" transfructosylation process, only synthesizing a small number of short-chain oligosaccharides with polymerization degrees below 6, which was in favor of the accumulation of high-molecular-weight inulin. Given this, L. mulieris inulosucrase might be a good potential candidate for the industrial production of high-molecular-weight inulin. [Display omitted] • A novel inulosucrase from Lactobacillus mulieris UMB7800 was identified. • Reaction conditions were optimized to get high inulin production and molecular weight. • The maximum molecular weight of produced inulin reached 3.21 × 106 g/mol. • The enzyme showed a "processive" transfructosylation process. [ABSTRACT FROM AUTHOR]

• Levansucrase and N543A mutant inulosucrase were co-immobilised as cross-linked enzyme aggregate (combi-CLEAs). • Combi-CLEAs synthesised high amount of LFOS compared to those of free levansucrase. • The size distribution of LFOS could be controlled by the ratio of levansucrase and inulosucrase. • Co-immobilization significantly improved stabilities of biocatalyst. Efficient and convenient access to short to medium chain length levan-type fructooligosaccharides (LFOS) is needed in order realise the nutritional potential of this class of bioactive oligosaccharides. While LFOS are synthesised by fructansucrase enzymes, these reactions are routinely associated with high molecular weight fructan polymer formation. Recent studies have shown that FOS production can be enhanced by the combination of levansucrase and inulosucrase in a one-pot reaction. In the present study, the novel mixed enzyme cross-linked enzyme aggregates (combi-CLEAs) based on levansucrase (Lev) and N543A variant inulosucrase (Inu) were prepared by ammonium sulfate precipitation, followed by glutaraldehyde cross-linking. The effect of Lev and Inu ratio on the activity of combi-CLEAs was explored. The results showed that >70% of total sucrase activity was recovered after immobilization and that the combi-CLEAs produced high amounts of LFOS (degree of polymerisation 3 to 21), while high molecular weight polysaccharide production was much reduced. Biochemical characterisation indicated that the optimum pH and temperature of combi-CLEAs (pH 5.5 and 50ᵒC, respectively) were comparable to those of free enzyme; however, the stability of the enzyme was improved. In addition, these combi-CLEAs have operational stability for several reaction cycles, which makes them very attractive for biotechnology applications. [Display omitted] [ABSTRACT FROM AUTHOR]

A new process based on enzymatic synthesis of a series of raffinose-derived oligosaccharides or raffinosyl-oligofructosides (RFOS) with degree of polymerization (DP) from 4 to 8 was developed in the presence of raffinose. This process involves a transfructosylation reaction catalyzed by an inulosucrase from Lactobacillus gasseri DSM 20604 (IS). The main synthesized RFOS were structurally characterized by nuclear magnetic resonance (NMR). According to the elucidated structures, RFOS consist of β-2,1-linked fructose unit(s) to raffinose: α- d-galactopyranosyl-(1 → 6)-α- d-glucopyranosyl-(1↔2)-β- d-fructofuranosyl-((1 ← 2)-β- d-fructofuranoside)n (where n refers to the number of transferred fructose moieties). The maximum yield of RFOS was 33.4 % (in weight respect to the initial amount of raffinose) and was obtained at the time interval of 8-24 h of transfructosylation reaction initiated with 50 % ( w/ v) of raffinose. Results revealed the high acceptor and donor affinity of IS towards raffinose, being fairly comparable with that of sucrose for the production of fructooligosaccharides (FOS), including when both carbohydrates coexisted (sucrose/raffinose mixture, 250 g L each). The production of RFOS was also attempted in the presence of sucrose/melibiose mixtures; in this case, the predominant acceptor-product formed was raffinose followed by a minor production of a series of oligosaccharides with varying DP. The easiness of RFOS synthesis and the structural similarities with both raffinose and fructan series of oligosaccharides warrant the further study of the potential bioactive properties of these unexplored oligosaccharides. [ABSTRACT FROM AUTHOR]

Efficient enzymatic synthesis of lactosyl-oligofructosides (LFOS) with a degree of polymerization from 4 to 8 was achieved in the presence of sucrose:lactosucrose and sucrose:lactose mixtures by transfructosylation reaction. The main synthesized LFOS which consist of β-2,1-linked fructose to lactosucrose: β- d -galactopyranosyl-(1 → 4)-α- d -glucopyranosyl-[(1 → 2)-β- d -fructofuranosyl]n-(1 → 2)-β- d -fructofuranoside (where n refers to the number of transferred fructose moieties) was structurally characterized by nuclear magnetic resonance (NMR). The maximum formation of LFOS was 81% (in weight with respect to the initial amount of lactosucrose) and was obtained after 24 h of transfructosylation reaction based on sucrose:lactosucrose (250 g L − 1 each) catalyzed by an inulosucrase from Lactobacillus gasseri DSM 20604 (IS). The production of LFOS in the presence of sucrose:lactose mixtures required a previous high-yield lactosucrose synthesis step catalyzed by using a levansucrase from Bacillus subtilis CECT 39 (LS) before the inulosucrase-catalyzed reaction. This novel one-pot bi-enzymatic system led to the synthesis of about 22% LFOS in weight, with respect to the initial amount of lactose (250 g L − 1 ). The results revealed a high specificity for the substrate involved in the inulosucrase-catalyzed reaction given that, although lactosucrose ( O -β- d -galactopyranosyl-(1 → 4)- O -α- d -glucopyranosyl-(1 → 2)-β- d -fructofuranoside) acted as a strong acceptor of β-2,1-linked fructose, lactose (β- d -galactopyranosyl-(1 → 4)-α- d -glucose) was found to be an extremely weak acceptor. [ABSTRACT FROM AUTHOR]

Microbial inulosucrase as a transfructosylation tool has been used to produce inulin and inulin-type fructooligosaccharides with various polymerization degrees. Tailor-made oligosaccharides could be generated by inulosucrase via chain length modulation. In this study, a semi-rational design based on the modeled structure of Lactobacillus reuteri 121 inulosucrase was carried out to screen and construct variants. The residues Arg541 and Arg544 were determined to be significant to the product chain elongation of L. reuteri 121 inulosucrase. The variant R544W altered the product specificity of inulosucrase and produced short-chain fructooligosaccharides with 1-kestose as the main component. Molecular dynamic simulations verified an increased binding free energy of variant R544W with 1-kestose than the wild-type enzyme with 1-kestose. After optimization, 1-kestose and total short-chain fructooligosaccharides production reached approximately 206 g/L and 307 g/L, respectively. This study suggests the great potential of variant R544W in the biotransformation from sucrose to functional sugar. [Display omitted] • Changing the function of inulosucrase to that of β -fructofuranosidase. • Semi-rational design was used to alter the product specificity of inulosucrase. • Modulating the product distribution to directionally produce 1-kestose. • The yield of 1-kestose and total ScFOSs reached 206 and 307 g/L, respectively. [ABSTRACT FROM AUTHOR]

Fructan-exopolysaccharides (fructan-EPS) (inulin and levan) and their oligosaccharides (fructooligosaccharides, FOS) have drawn considerable interest in the food and pharmaceutical industries. EPS-producing lactic acid bacteria have been reported to produce β-fructans (inulin and levan), as well as α-glucans, by the function of sucrase enzymes, i.e., fructansucrase and glucansucrase. A fructansucrase ftf CNC-2(1) gene from Weissella confusa strain MBFCNC-2(1) was previously cloned in Escherichia coli . In this study, we aimed to express the ftf [CNC-2(1)] gene in Bacillus subtilis to obtain the active form of the extracellular recombinant protein FTF[CNC-2(1)]. This cloning was achieved by inserting the gene in-fusion with the signal sequence of the B. subtilis subtilisin E. SDS-polyacrylamide gel electrophoresis analysis and in situ activity assay with Periodic Acid-Schiff staining revealed that the recombinant FTF[CNC-2(1)] was successfully expressed as an extracellular protein from B. subtilis DB403 in its active form, which was confirmed using sucrose and raffinose. [ABSTRACT FROM AUTHOR]

Background: IslA4 is a truncated single domain protein derived from the inulosucrase IslA, which is a multidomain fructosyltransferase produced by Leuconostoc citreum. IslA4 can synthesize high molecular weight inulin from sucrose, with a residual sucrose hydrolytic activity. IslA4 has been reported to retain the product specificity of the multidomain enzyme. Results: Screening experiments to evaluate the influence of the reactions conditions, especially the sucrose and enzyme concentrations, on IslA4 product specificity revealed that high sucrose concentrations shifted the specificity of the reaction towards fructooligosaccharides (FOS) synthesis, which almost eliminated inulin synthesis and led to a considerable reduction in sucrose hydrolysis. Reactions with low IslA4 activity and a high sucrose activity allowed for high levels of FOS synthesis, where 70% sucrose was used for transfer reactions, with 65% corresponding to transfructosylation for the synthesis of FOS. Conclusions: Domain truncation together with the selection of the appropriate reaction conditions resulted in the synthesis of various FOS, which were produced as the main transferase products of inulosucrase (IslA4). These results therefore demonstrate that bacterial fructosyltransferase could be used for the synthesis of inulin-type FOS. [ABSTRACT FROM AUTHOR]

Inulosucrase (ISC) and levansucrase (LSC) utilise sucrose and produce inulin- and levan-type fructans, respectively. This study aims to propose a new strategy to improve levan-type fructooligosaccharide (L -FOS) production. The effect of ISC/ LSC -mixed reaction was elucidated on L -FOS production. The presence of ISC in the LSC reaction significantly leads to the higher production of L -FOSs as the main products. Furthermore, the different ratios between ISC and LSC affected the distribution of L -FOSs. A greater amount of ISC compared to LSC promoted the synthesis of short-chain L -FOSs. Conversely, when LSC was increased, the synthesis of longer-chain L -FOSs was enhanced. The addition of trisaccharide mixtures obtained from either a single ISC or LSC reaction could enhance L -FOSs synthesis in the LSC reaction. Analysis of these trisaccharides revealed that most species of the oligosaccharides were similar, with 1-kestose being the major one. The supplement of only 1-kestose in the LSC reaction showed similar results to those of the reaction in the presence of trisaccharide mixtures. Moreover, the results were supported by molecular dynamics simulations. This work not only provides an improvement in L -FOS production but also revealed and supported some insights into the mechanism of fructansucrases. [Display omitted] • The presence of inulosucrase in levansucrase reaction could significantly raise yield of L -FOSs. • The ratio of inulosucrase:levansucrase affects the degree of polymerisation of L -FOSs. • Inulosucrase serves 1-kestose as precursors for L -FOS synthesis of levansucrase. [ABSTRACT FROM AUTHOR]

The probiotic bacterium Lactobacillus reuteri 121 produces two fructosyltransferase enzymes, a levansucrase and an inulosucrase. Although these two fructosyltransferase enzymes share high sequence similarity, they differ significantly in the type and size distribution of fructooligosaccharide products synthesized from sucrose, and in their activity levels. In order to examine the contribution of specific amino acids to such differences, 15 single and four multiple inulosucrase mutants were designed that affected residues that are conserved in inulosucrase enzymes, but not in levansucrase enzymes. The effects of the mutations were interpreted using the 3D structures of Bacillus subtilis levansucrase (SacB) and Lactobacillus johnsonii inulosucrase (InuJ). The wild-type inulosucrase synthesizes mostly fructooligosaccharides up to a degree of polymerization of 15 and relatively low amounts of inulin polymer. In contrast, wild-type levansucrase produces mainly levan polymer and fructooligosaccharides with a degree of polymerization < 5. Although most of the inulosucrase mutants in this study behaved similarly to the wild-type enzyme, the mutation G416E, at the rim of the active site pocket in loop 415-423, increased the hydrolytic activity twofold, without significantly changing the transglycosylation activity. The septuple mutant GM4 (T413K, K415R, G416E, A425P, S442N, W486L, P516L), which included two residues from the above-mentioned loop 415-423, synthesized 1-kestose only, but at low efficiency. Mutation A538S, located behind the general acid/base, increased the enzyme activity two to threefold. Mutation N543S, located adjacent to the +1/+2 sub-site residue R544, resulted in synthesis of not such a wide variety of fructooligosaccharides than the wild-type enzyme. The present study demonstrates that the product specificity of inulosucrase is easily altered by protein engineering, obtaining inulosucrase variants with higher transglycosylation specificity, higher catalytic rates and different fructooligosaccharide size distributions, without changing the β(2-1) linkage type in the product. [ABSTRACT FROM AUTHOR]

Abstract: Fructansucrases (FSs) catalyze a transfructosylation reaction with sucrose as substrate to produce fructo-oligosaccharides and fructan polymers that contain either β-2,1 glycosidic linkages (inulin) or β-2,6 linkages (levan). Levan-synthesizing FSs (levansucrases) have been most extensively investigated, while detailed information on inulosucrases is limited. Importantly, the molecular basis of the different product specificities of levansucrases and inulosucrases is poorly understood. We have elucidated the three-dimensional structure of a truncated active bacterial GH68 inulosucrase, InuJ of Lactobacillus johnsonii NCC533 (residues 145–708), in its apo form, with a bound substrate (sucrose), and with a transfructosylation product. The sucrose binding pocket and the sucrose binding mode are virtually identical with those of GH68 levansucrases, confirming that both enzyme types use the same fully conserved structural framework for the binding and cleavage of the donor substrate sucrose in the active site. The binding mode of the first transfructosylation product 1-kestose (Fru-β(2–1)-Fru-α(2–1)-Glc, where Fru=fructose and Glc=glucose) in subsites −1 to +2 shows for the first time how inulin-type fructo-oligosaccharide bind in GH68 FS and how an inulin-type linkage can be formed. Surprisingly, observed interactions with the sugar in subsites +1 and +2 are provided by residues that are also present in levansucrases. The binding mode of 1-kestose and the presence of a more distant sucrose binding site suggest that residues beyond the +2 subsite, in particular residues from the nonconserved 1B–1C loop, determine product linkage type specificity in GH68 FSs. [Copyright &y& Elsevier]

Site-directed mutagenesis was performed on IslA4, a truncated form of inulosucrase (IS) derived from Leuconostoc citreum IS that contains only the IS catalytic domain. This truncated form is more hydrolytic than the wild-type enzyme and produces both high-molecular-weight inulin and fructooligosaccharides (FOS). Among the various mutants obtained from IslA4 by following strategies designed for SacB (the levansucrase from Bacillus subtilis), S425A no longer produces inulin, but instead produces FOS exclusively and hydrolyzes sucrose. Reaction conditions were explored to increase FOS productivity by reducing the hydrolysis, resulting in 65% conversion from a 0.67 M sucrose solution. S425A displays complex kinetic behavior in which the transfructosylation rate is described by first-order kinetics, while sucrose hydrolysis follows Michaelis–Menten behavior. This combined model correctly describes both the overall initial reaction rate as well as the reaction evolution for FOS synthesis. S425A IS may be useful for the synthesis of FOS from sucrose. [ABSTRACT FROM AUTHOR]

Microbial fructosyltransferases are polymerases that are involved in microbial fructan (levan, inulin and fructo-oligosaccharide) biosynthesis. Structurally, microbial fructosyltransferase proteins share the catalytic domain of glycoside hydrolases 68 family and are grouped in seven phylogenetically related clusters. Fructosyltransferase-encoding genes are organized in operons or in clusters associated with other genes related to carbohydrate metabolism or fructosyltransferase secretion. Fructosyltransferase gene expression is mainly regulated by two-component systems or phosphorelay mechanisms that respond to sucrose availability or other environmental signals. Microbial fructans are involved in conferring resistance to environmental stress such as water deprivation, nutrient assimilation, biofilm formation, and as virulence factors in colonization. As a result of the biological and industrial importance of fructans, fructosyltransferases have been the subject of extensive research, conducted to improve their enzymatic activity or to elucidate their biological role in nature. [ABSTRACT FROM AUTHOR]

Bacterial fructansucrase enzymes belong to glycoside hydrolase family 68 and catalyze transglycosylation reactions with sucrose, resulting in the synthesis of fructooligosaccharides and/or a fructan polymer. Significant differences in fructansucrase enzyme product specificities can be observed, i.e. in the type of polymer (levan or inulin) synthesized, and in the ratio of polymer versus fructooligosaccharide synthesis. The Lactobacillus reuteri 121 inulosucrase enzyme produces a diverse range of fructooligosaccharide molecules and a minor amount of inulin polymer [with β(2–1) linkages]. The three-dimensional structure of levansucrase (SacB) of Bacillus subtilis revealed eight amino acid residues interacting with sucrose. Sequence alignments showed that six of these eight amino acid residues, including the catalytic triad (D272, E523 and D424, inulosucrase numbering), are completely conserved in glycoside hydrolase family 68. The other three completely conserved residues are located at the − 1 subsite (W271, W340 and R423). Our aim was to investigate the roles of these conserved amino acid residues in inulosucrase mutant proteins with regard to activity and product profile. Inulosucrase mutants W340N and R423H were virtually inactive, confirming the essential role of these residues in the inulosucrase active site. Inulosucrase mutants R423K and W271N were less strongly affected in activity, and displayed an altered fructooligosaccharide product pattern from sucrose, synthesizing a much lower amount of oligosaccharide and significantly more polymer. Our data show that the − 1 subsite is not only important for substrate recognition and catalysis, but also plays an important role in determining the size of the products synthesized. [ABSTRACT FROM AUTHOR]

Abstract: Bacterial fructosyltransferase enzymes belonging to glycoside hydrolase family 68 (GH68) are not known to require a metal cofactor. Here, we show that Ca2+ ions play an important structural role in the Lactobacillus reuteri 121 levansucrase (Lev) and inulosucrase (Inu) enzymes. Analysis of the Bacillus subtilis Lev 3D structure [Meng, G. and Futterer, K. (2003) Nat. Struct. Biol. 10, 935–941] has provided evidence for the presence of a bound metal ion, most likely Ca2+. Characterization of site-directed mutants in the putative Ca2+ ion-binding sites of Lb. reuteri Lev and Inu revealed that the Inu Asp520 and Lev Asp500 residues play an important role in Ca2+ binding. Sequence alignments of family GH68 proteins showed that this Ca2+ ion-binding site is (largely) present only in proteins of Gram-positive origin. [Copyright &y& Elsevier]

Biochemical properties of inulosucrase from Leuconostoc citreum CW28, a potential biocatalyst for inulin synthesis, were determined in order to select optimal reaction conditions. The hydrolysis reaction was about 3.5 times more efficient than the transferase reaction. It was found that high sucrose concentrations (≈250 g L -1 ) were required for maximum fructose transferase yields. High molecular weight inulin distributions were obtained with cell associated inulosucrase, while lower size products were associated to the activity of the free enzyme in solution. When using whole cells, mannitol was found as a by-product of the reaction resulting from the reduction of fructose released by sucrose hydrolysis. A 30 L pilot plant synthesis with 250 g L -1 of sucrose was carried out using the cell associated inulosucrase resulting in 76% of the substrate being transformed to inulin. [ABSTRACT FROM AUTHOR]

Inulosucrases catalyze transfer of a fructose moiety from sucrose to a water molecule (hydrolysis) or to an acceptor molecule (transferase), yielding inulin. Bacterial inulin production is rare and a biochemical analysis of inulosucrase enzymes has not been reported. Here we report biochemical characteristics of a purified recombinant inulosucrase enzyme from Lactobacillus reuteri. It displayed Michaelis–Menten type of kinetics with substrate inhibition for the hydrolysis reaction. Kinetics of the transferase reaction is best described by the Hill equation, not reported before for these enzymes. A C-terminal deletion of 100 amino acids did not appear to affect enzyme activity or product formation. This truncated form of the enzyme was used for biochemical characterization. [Copyright &y& Elsevier]