Search

Weed communities in three cropping systems suitable for the Midwestern USA were studied from 2017 to 2020 to examine how crop diversification and the intensity of herbicide use affected weed community diversity, stand density, and aboveground mass. A baseline 2-year cropping system with corn (Zea mays L.) and soybean (Glycine max (L.) Merr.) grown in alternate years was diversified with cool-season crops, namely oat (Avena sativa L.), red clover (Trifolium pratense L.), and alfalfa (Medicago sativa L.) in 3-and 4-year systems. Herbicide was not applied in the cool-season crops. Changing weed management regime from broadcast to banded application and interrow cultivation in corn and omitting herbicide in cool-season crops of the 3- and 4-year rotations resulted in an overall reduction of herbicide a.i mass. The reduction in the mass of herbicide active ingredients was associated with increases in weed stand density, aboveground mass, and community diversity. Increased weed abundance under herbicide mass reduction was not associated with crop yield loss. In the cool-season crops phases of the 3- and 4-year rotations, weed emergence was increased but weed growth was not, as compared with the warm-season crop environments. The dominance of aggressive weed species such as common waterhemp (Amaranthus tuberculatus (Moq ex DC) J.D. Sauer) and common lambsquarter (Chenopodium album L.) tended to be greater in corn and soybean phases of the rotations than in oat, red clover, and alfalfa. [ABSTRACT FROM AUTHOR]

Ambrosia artemisiifolia has turned into a noxious weed species in agricultural fields and landscapes in Europe. Durable control options are still needed to limit the abundance of this species. Weed seed consumption by naturally occurring seed predators is a key ecosystem service in agricultural areas. Seed predation levels of common ragweed were examined in wheat and maize fields and adjacent semi-natural habitats (SNHs). To evaluate the weed seeds' exposure to invertebrate seed predators, 20 cards each were set on the soil surface inside the crop field and in SNHs with four replications. Twenty seeds of ragweed were attached to sandpaper. Seed removal was assessed every 24 h of exposure for 5 days in June and November 2019, October 2020, and June 2021. The seed consumption level was measured according to the number of removed seeds from the seed cards. High consumption rates of ragweed seeds were found in all sampling rounds in both seasons and habitats. The seed predation rates in 2019 were stronger within crop fields in summer than in autumn with a slight difference between SNHs and inside fields. Our results demonstrate the possibility of seed predation contributing to Integrated Plant Protection (IPM) of common ragweed in rural areas. [ABSTRACT FROM AUTHOR]

Annual ryegrass (Lolium rigidum) is a problematic weed in winter crops and fallows in the southeastern cropping region (SCR) of Australia. This weed has evolved resistance to multiple herbicide groups, globally. In Australia, L. rigidum is more prevalent in the western and southern regions than in SCR. To assess the herbicide resistance status of L. rigidum, the response of five L. rigidum populations (collected from the SCR) to glyphosate, glufosinate, paraquat, haloxyfop-P-ethyl, and clethodim is determined using dose–response curves. Three parametric logistic models are used to determine the herbicide dose required to achieve 50% survival (LD50) and 50% growth reduction (GR50). The LD50 values for 50% survival at 28 days after treatment range from 1702 g a.e. ha−1 to 8225 g a.e. ha−1 for glyphosate, 1637 g a.i. ha−1 to 1828 g a.i. ha−1 for glufosinate, 141 g a.i. ha−1 to 307 g a.i. ha−1 for paraquat, 11 g a.i. ha−1 to 107 g a.i. ha−1 for haloxyfop-P-ethyl, and 17 g a.i. ha−1 to 48 g a.i. ha−1 for clethodim. The resistance factor, based on GR50 value, is highest in the S7 population (2.2 times) for glyphosate, the S11 population (2.3 times) for glufosinate, the S11 population (2.0 time) for paraquat, the S7 population (3.9 times) for haloxyfop-P-ethyl, and the S3 population (3.1 times) for clethodim, compared with the susceptible or less tolerant population. The S11 population is found to be resistant to five tested herbicides, based on resistance factors. Similarly, the S3 population is highly resistant to glyphosate, haloxyfop-P-ethyl, and clethodim compared with the W4 population. These results suggest that L. rigidum populations in the SCR exhibit resistance to multiple herbicide groups at labelled field rates. The findings highlight the necessity of adopting an integrated management approach, including the use of residual herbicides, tank mixing herbicides with different modes of action, and rotating herbicides in conjunction with cultural and mechanical control methods. [ABSTRACT FROM AUTHOR]

Herbicide-resistant weeds threaten contemporary agriculture by reducing crop yields and quality. Monitoring of herbicide-resistant weeds is essential to the development of informed integrated weed management (IWM) strategies. In 2019 and 2020, a randomized-stratified preharvest survey of 419 fields in Saskatchewan, Canada, was conducted to determine the distribution, frequency of occurrence, and impact of herbicide-resistant weeds. Mature seeds were collected from uncontrolled weeds in each field. The samples were tested for resistance to acetyl-CoA carboxylase (ACCase) and/or acetolactate synthase (ALS)-inhibiting herbicides using whole-plant bioassays under a controlled-environment. In 2019/2020, herbicide-resistant weeds occupied 72% of the surveyed fields, corresponding to an estimated 6.2 million ha of annual cropland and a total field area of 11.4 million ha. Herbicide-resistant weeds cost Saskatchewan farmers an estimated $343 million CAD annually in reduced crop yields and quality, and increased weed control expenditures. Wild oat (Avena fatua L.) had the greatest impact among grass weeds, with ACCase inhibitor resistance documented in 77% and ALS inhibitor resistance in 30% of fields where the weed seeds were collected and tested (47% and 18% of all fields surveyed, respectively). Multiple herbicide (ACCase and ALS inhibitor)-resistant wild oat were documented in 26% of the tested fields. Kochia (Bassia scoparia (L.) A.J. Scott) had the greatest impact among broadleaf weeds, where 100% of the samples tested were ALS inhibitor-resistant (39% of all fields surveyed). The growing prevalence of herbicide-resistant weeds in Saskatchewan warrants further adoption of IWM where non-chemical tactics play an important role in stewardship of the remaining effective herbicides. [ABSTRACT FROM AUTHOR]

Introduction: Cover crop services depend on biomass production and species composition of the cover crop stand. In this study, we investigated the interactions in shoot biomass of dual cover crop mixtures and their competitiveness to suppress weeds before winter under different growing conditions. Methods: A field experiment was performed on sandy loam soil in Triesdorf, Germany, for two consecutive years. The cover crop species white mustard (Sinapis alba L.), oil radish (Raphanus sativus var. oleiformis L.), phacelia (Phacelia tanacetifolia J.), Egyptian clover (Trifolium alexandrinum L.), common vetch (Vicia sativa L.), field pea (Pisumsativum L.), and field bean (Vicia faba L.) were grown in pure stands or dual mixtures. Cover crops were sown in August, and shoot biomass was harvested at the end of the vegetation period. Cover crop shoot biomass was dried, and the share of each species and the sown test weed (Brassica napus L.) were determined. Results: The share of shoot biomass of a cover crop species in dual-species mixtures was closely related to its shoot biomass in its pure stand. In both years, mustard and phacelia showed similar interactions in shoot biomass production when growing with a second species. Regarding competitiveness against weeds, cruciferous species outperformed other cover crop species and could suppress weeds even if they were mixed with a less competitive partner. Weed suppression of mixtures with phacelia depended on the second component in the mixture and was more effective in a dry season. Legume species, especially Egyptian clover and common vetch could not suppress weeds in a pure stand. Discussion: Our results show that species with high weed suppression potential as single stands retain this ability in dual cover crop mixtures, regardless of the suppression potential of the second species that completes the mixture. [ABSTRACT FROM AUTHOR]

Increased agricultural weed diversity is associated with reduced dominance of competitive weeds that reduce crop yields. In addition, diverse weed communities can promote biodiversity at other trophic levels and enhance ecosystem services. For both reasons, there is increasing interest in the relationship between agricultural management and weed diversity. Existing information in this area is limited, relative to the large number of influential factors, but knowledge is increasing rapidly. We conducted a scoping review to determine when, where, and how weed diversity has been evaluated in relation to management. From an initial set of 10 236 items retrieved from Web of Science and Scopus, 7198 were screened and 331 were included. The median publication year was 2015. Nearly half of all studies were conducted in Europe (n = 161, 49%). Organic cropping systems were included in 48 studies (15%). Tillage was the most common management factor (n = 111, 34%), followed by crop rotation (n = 73, 22%). There were 135 studies in which management factors were implemented for six or more years (41%). Most studies included measurements of species richness (n = 265, 80%) and/or Shannon–Wiener diversity (n = 145, 44%). Overall, this review identified a small and heterogenous—but quickly growing—body of literature on weed diversity. Priority areas for future research should include weed diversity beyond field crops in temperate environments, weed seedbanks, functional diversity, and best practices for measuring weed diversity. [ABSTRACT FROM AUTHOR]

Corn- and soybean-dominated cropping systems create and maintain a favorable environment for summer annual weeds whose emergence and growth phenology are similar to these annual summer crops. Cropping system diversification can be an effective approach for controlling noxious weeds without increasing reliance on chemical herbicides. Diversification may be especially important for managing waterhemp, a dioecious, summer annual weed that is becoming increasingly prevalent in the US Corn Belt due to its life history characteristics and herbicide resistance profile. Compared to corn and soybean, alfalfa and oat emerge and establish earlier and are thus more competitive with warm-season weeds like waterhemp. Knowledge of vegetative and reproductive characteristics in a range of crop environments can be valuable for planning weed management strategies. However, most of the relevant characteristics for a population dynamics model were available in corn and soybean monocultures. We examined the relationship between waterhemp's abovegroundmass and fecundity under four crop species' presence within three crop rotation systems: a 2-year sequence of corn and soybean; a 3-year sequence of corn, soybean, and oat intercropped with red clover; and a 4-year sequence of corn, soybean, oat intercropped with alfalfa, and alfalfa. All the rotation systems were treated with conventional or reduced rates of herbicides. We established eighteen linear equations to predict waterhemp's fecundity from dried aboveground mass in each crop and associated crop management program since measuring the latter allows for quicker estimation of fecundity compared to counting seeds on each individual plant. Rotation system and crop phase within rotation system had significant effects on all the response variables but weed control regime on some. The sex ratios at maturity were slightly female-biased in oat and alfalfa. Mature waterhemp plants were larger in corn and soybean than in oat and alfalfa. Oat and alfalfa were planted earlier than corn and soybean and successfully competed for resources against waterhemp despite the absence of herbicide or interrow cultivation. Frequent hay cuts in alfalfa served as physical weed control and contributed to suppressing waterhemp and other weeds substantially. [ABSTRACT FROM AUTHOR]

Since the introduction and widespread adoption of chemical herbicides, "weed management" has become almost synonymous with "herbicide management." Over-reliance on herbicides and herbicide-resistant crops has given rise to herbicide resistant weeds. Integrated weed management (IWM) identifies three strategies for weed management— biological-cultural, chemical-technological, mechanical-physical—and recommends combining all three to mitigate herbicide resistance. However, adoption of IWM has stalled, and research to understand the adoption of IWM practices has focused on single stakeholder groups, especially farmers. In contrast, decisions about weed management often occur within a social ecosystem where multiple stakeholder groups co-create knowledge and practices. To more holistically investigate perceptions and decision-making related to herbicide resistant weed management, we conducted 23 in-depth interviews in combination with Q methodology with farmers and public-/private-sector agricultural professionals in the state of Georgia (U.S.). Our investigation focused on the management of an increasingly herbicide resistant weed, Palmer amaranth, which enabled broader conversations about agricultural systems, farmer livelihoods, and sustainability. Factor and thematic analyses allowed us to identify and characterize two distinct typologies: one primarily valued agronomic efficiency and relied upon chemical-technological management practices, while the other valued diversifying weed management strategies as the pathway to agronomic and economic success. Typologies diverged substantially in attitudes toward the three weed management strategies, the role of technology, and systems management generally. These two viewpoints have implications for how we understand underlying stakeholder motivations and choices around weed management strategies, both of which are crucial in promoting and supporting farmer use of diverse, ecologically-sound, weed management strategies. [ABSTRACT FROM AUTHOR]

Weeds compete for environmental resources, leading to reduced soybean yield. In this context, integrated weed management strategies related to cultural control with the use of cover crops are necessary. Our aim was to evaluate weed occurrence in soybean systems with different cover crops. Field studies were conducted at Júlio de Castilhos, Santa Maria, Capão do Leão, Barra do Ribeiro, and Santo Ângelo, Rio Grande do Sul, Brazil. A randomized complete block design with four replications was used. Treatments consisted of black oats (Avena strigosa Schreb.), white oats (Avena sativa L.), rye (Secale cereale L.), hairy vetch (Vicia sativa L.), forage turnip (Raphanus sativus L.), and white clover (Trifolium repens L.) in pure stands or in mixtures. The analyzed variables were relative frequency, density, abundance, and importance value index, similarity index of weeds, dry shoot mass of cover crop, and soybean yield. Cover crops containing white or black oats reduced the relative importance value index of weeds, such as Lollium multiforum, Conyza spp., and Bidens pilosa. Forage turnip, hairy vetch, and white clover showed distinct responses. Black oats and forage turnip did not differ from cover crop mixtures in terms of dry shoot mass and grain yield, being superior to fallow, white clover, and hairy vetch. [ABSTRACT FROM AUTHOR]

New cropping practices such as single-grain seeding, lower seed densities with stronger cultivars, wide inter-row spacings and camera-guided side-shift control for weed hoeing facilitate mechanical weed control in oilseed rape. In a two-year field study in Southwestern Germany, camera-guided inter-row hoeing was compared to standard herbicide treatments and untreated control. Seeding with 12.5, 25 and 50 cm inter-row spacing was included as a second factor in the experiment. Weed and crop density were measured directly after treatment. Weed and crop biomass, oilseed rape root diameter and nitrogen uptake were assessed before winter. Seed yield was measured at harvest with a plot combine harvester. In 2021, hoeing in 50 cm inter-row spacing achieved equal weed control efficacy as the herbicide treatment (65-75%). In 2022, hoeing did not reduce weed density, probably due to heavy rainfalls during the first and second pass of hoeing. However, herbicide treatments controlled 92% of the weeds. In 2021, hoeing significantly increased oilseed rape shoot biomass and root diameter compared to the herbicide treatment and the untreated control. Hoeing in 50 cm inter-row spacing resulted in equal yield as the herbicide treatment. In 2022, weed control treatments and inter-row spacing had no effect on oilseed rape biomass, root diameter and yield. This study shows the potential and limitations of weed hoeing in oilseed rape. It also underlines the strong ability of modern oilseed rape cultivars to suppress annual broadleaved weeds.

Simple crop rotations like maize and soyabean grown in succession often coincide with simple weed management tactics, resulting in weed infestations that are highly adapted to the conditions maintained for the selected crops. Amaranthus tuberculatus is a prominent weed species which possesses biological characteristics that allow it to persist in maize–soyabean rotations. Spring wheat and oats emerge earlier than A. tuberculatus and are grown in narrower rows than maize and soyabean, which may increase their competitive capability. A field study which measured morphological and phenological characteristics of three A. tuberculatus cohorts that emerged under fallow, maize, soyabean, spring wheat and oats was conducted to compare their competitive ability. Early emerged A. tuberculatus grew similarly in fallow, maize and soyabeans and grew to heights of >150 cm but was significantly reduced in spring wheat and oats, never exceeding 40 cm. Heights of the last emerged cohorts were more influenced by crop canopies never reaching 15 cm in spring wheat and oats compared to >70 cm in fallow. Early emerged A. tuberculatus canopy diameter and branches plant−1 were reduced by >80% in spring wheat and oats compared to fallow. Flowering was delayed in spring wheat and oats compared to fallow and seed production and biomass were reduced by 99% across cohorts. Growth suppression of A. tuberculatus, based on the findings, can be achieved under dense, competitive crop canopies such as in spring wheat and oats and these crops should be considered as additional crops in maize–soyabean rotations. [ABSTRACT FROM AUTHOR]

Blue heliotrope (Heliotropium amplexicaule Vahl) is an extremely drought-hardy perennial weed that is often problematic within agricultural production systems and natural environments in some parts of the world. It has the capacity to outcompete and displace desirable plant species and it contains various biochemical compounds that are toxic to grazing livestock and humans. Heliotropium amplexicaule plants can grow within a range of climatic and environmental conditions and produce seeds that remain dormant for several years within the soil which exhibit staggered emergence long after the original parent plants have expired. While control options, including biological, chemical, cultural, and physical methods, are available, many are not suitable as a single-use approach for the long-term management of this species. Therefore, an integrated weed management (IWM) program is necessary for the confident and long-term management of H. amplexicaule, particularly within dryland ecosystems. This review explores the biology, ecology, distribution, and suitable management options currently available for H. amplexicaule, while identifying research gaps that can be addressed to assist in its future management. While particular emphasis is placed on the Australian experience, information from a global perspective is included, providing valuable insights for the long-term management of H. amplexicaule worldwide. [ABSTRACT FROM AUTHOR]

New cropping practices such as single-grain seeding, lower seed densities with stronger cultivars, wide inter-row spacings and camera-guided side-shift control for weed hoeing facilitate mechanical weed control in oilseed rape. In a two-year field study in Southwestern Germany, camera-guided inter-row hoeing was compared to standard herbicide treatments and untreated control. Seeding with 12.5, 25 and 50 cm inter-row spacing was included as a second factor in the experiment. Weed and crop density were measured directly after treatment. Weed and crop biomass, oilseed rape root diameter and nitrogen uptake were assessed before winter. Seed yield was measured at harvest with a plot combine harvester. In 2021, hoeing in 50 cm inter-row spacing achieved equal weed control efficacy as the herbicide treatment (65-75%). In 2022, hoeing did not reduce weed density, probably due to heavy rainfalls during the first and second pass of hoeing. However, herbicide treatments controlled 92% of the weeds. In 2021, hoeing significantly increased oilseed rape shoot biomass and root diameter compared to the herbicide treatment and the untreated control. Hoeing in 50 cm inter-row spacing resulted in equal yield as the herbicide treatment. In 2022, weed control treatments and inter-row spacing had no effect on oilseed rape biomass, root diameter and yield. This study shows the potential and limitations of weed hoeing in oilseed rape. It also underlines the strong ability of modern oilseed rape cultivars to suppress annual broadleaved weeds. [ABSTRACT FROM AUTHOR]

BACKGROUND: This study introduces a wild radish population collected from Yelbeni in the Western Australian grainbelt that evolved an early silique abscission (shedding) trait to persist despite long‐term harvest weed seed control (HWSC) use. In 2017, field‐collected seed (known herein as Yelbeni) was compared to surrounding ruderal and field‐collected populations in a fully randomized common garden study. RESULTS: The Yelbeni population exhibited a higher rate of silique abscission when compared to the ruderal populations collected from the site before wheat (Triticum aestivum L.) harvest (assessed at soft dough stage, Zadoks 83). A similar common garden study was conducted in the subsequent season (2018) using progeny reproduced on a single site without stress. The HWSC‐selected progeny (Yelbeni P) shed 1048 (±288) siliques before wheat maturity at the soft dough stage (Zadoks 83) compared to 25 (±7) siliques from the pooled control populations. The Yelbeni P population only flowered 6 days earlier (FT50 as determined by log‐logistic analysis) than pooled control populations, which is unlikely to fully account for the increased rate of silique abscission. The Yelbeni P population also located its lowest siliques below the lowest height for harvest interception (10 cm), which is likely to increase HWSC evasion. The mechanism inducing early silique‐shedding is yet to be determined; however, wild radish is known for its significant genetic variability and has demonstrated its capacity to adapt to environmental and management stresses. CONCLUSION: This study demonstrates that the repeated use of HWSC can lead to the selection of HWSC‐avoidance traits including early silique‐shedding before harvest and/or locating siliques below the harvest cutting height for interception. © 2024 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

The massive use of herbicides since the 1950s has resulted in increasing problems with herbicideresistant weeds and pollution of the environment, including food, feed, and water. These side effects have resulted in political pressures to reduce herbicide application. The European Commission aims to reduce the use and risk of chemicals and more hazardous pesticides in the EU. Therefore, new weed control methods are in demand. Laser weeding might be an alternative to replace or supplement herbicides and other weed control methods in an Integrated Weed Management (IPM) strategy. This work aimed to investigate how increasing laser energy affected common weeds when the apical meristem was exposed to irradiation at the early stages of development. A 50 W thulium-doped fibre laser with a diameter of 2 mm and a wavelength of 2 µm was used. The highest efficacy of laser irradiation was achieved when the grass weed (Alopecurus myosuroides) had one leaf and the dicot species were at the cotyledon stage. There was a large difference between the species' susceptibility to irradiation probably caused by differences in morphology and growth habit. At the 4-leaf stage, most of the species regrew after irradiation. Laser weeding may be a solution to replace or supplement other weed control methods in some crops, but in general the weeds must be irradiated when they are at the cotyledon to 2-leaf stage to avoid regrowth. [ABSTRACT FROM AUTHOR]

Canary grass (Phalaris canariensis L.) is a versatile crop with global significance; it is primarily cultivated for its small elliptical seeds, which are used as bird feed and for human consumption. This crop is adapted to various climates and soils, so it can be grown successfully in Hungary. However, challenges such as weed control, climate change impacts, and soil factors require strategic management for sustained success in canary grass cultivation. Our study investigated the impact of management and environmental (as seasonal and soil) factors on pre-harvest weed vegetation in canary grass fields in Southeast Hungary between 2017 and 2020. In addition to showing the weed vegetation of the canary grass, the aim of our work was to promote more effective weed management of canary grass by revealing correlations between soil, seasonality, and management variables, influencing weed diversity and coverage. Using the analysis of covariance (ANCOVA) and correlation tests, we tested significant variables, providing insights into the complex interactions affecting weed composition. A redundancy analysis (RDA) further unveiled the relationships between explanatory variables and weed species' composition. The findings offer valuable information for effective weed management strategies in canary grass cultivation. Our comprehensive study on canary grass fields in Southeast Hungary sheds light on significant factors influencing weed composition and abundance. The average weed coverage was 10.8%, with summer annuals and creeping perennials being the most prevalent life forms. Echinochloa crus-galli, Cirsium arvense, Xanthium italicum, and Setaria viridis were among the dominant species. ANCOVAs revealed the impact of soil, management, and seasonal factors on weed cover, species richness, diversity, and yield levels. Soil properties like texture, pH, and nitrogen content showed varying effects on weed parameters. The vintage effect, tillage systems, and farming practices also played crucial roles. The redundancy analysis highlighted the influence of the year, soil sulfur content, and winter preceding crops on weed composition. In conclusion, the herbaceous vegetation in the studied area is dominated by summer germinating and creeping perennial species. Despite slight differences in average coverage and occurrence, a well-defined set of significant species is evident. Multicollinearity among variables suggests limitations to further increase the number of variables that can be included in the analysis. The ANCOVAs showed that the soil, seasonal, and farming variables significantly influence overall weed vegetation and crop yield, with a lesser impact on species richness and diversity. The reduced RDA model highlights the strong influence of the year on species' composition, emphasizing the inherent factors during canary grass cultivation that are challenging to modify through farming practices. [ABSTRACT FROM AUTHOR]

There has been a longstanding and contentious debate about the future of glyphosate use in the European Union (EU). In November 2023, the European Commission approved the renewal of the use registration for glyphosate for a further 10 years. Nevertheless, the EU Farm to Fork strategy calls for a 50% reduction in pesticide use by 2030. In November 2022, the European Weed Research Society organised a 2 day workshop to identify critical glyphosate uses in current EU cropping systems and to review the availability of glyphosate alternatives. Workshop participants identified four current, critical uses in EU cropping systems; control and management of perennial weeds, weed control in conservation agriculture, vegetation management in tree and vine crops and herbicide resistance management. There are few herbicide alternatives that provide effective, economic, broad‐spectrum control of weeds, particularly perennial weeds. Mechanical weed control, and in particular, soil cultivation is the most obvious glyphosate alternative. However, this is not possible in conservation agriculture systems and, in general, increased soil cultivation has negative impacts for soil health. Emerging technologies for precision weed control can enable more targeted use of glyphosate, greatly reducing use rates. These technologies also facilitate the use and development of alternative targeted physical weed control (e.g. tillage, lasers, electricity), reducing the energy and environmental costs of these approaches. In tree crops, the use of organic and inorganic mulches can reduce the need for glyphosate use. In general, reduced use of glyphosate will require an even greater focus on integrated weed management to reduce weed establishment in agroecosystems, increase weed management diversity and limit the use of alternative resistance‐prone herbicides. [ABSTRACT FROM AUTHOR]

IntroductionCover crop services depend on biomass production and species composition of the cover crop stand. In this study, we investigated the interactions in shoot biomass of dual cover crop mixtures and their competitiveness to suppress weeds before winter under different growing conditions.MethodsA field experiment was performed on sandy loam soil in Triesdorf, Germany, for two consecutive years. The cover crop species white mustard (Sinapis alba L.), oil radish (Raphanus sativus var. oleiformis L.), phacelia (Phacelia tanacetifolia J.), Egyptian clover (Trifolium alexandrinum L.), common vetch (Vicia sativa L.), field pea (Pisum sativum L.), and field bean (Vicia faba L.) were grown in pure stands or dual mixtures. Cover crops were sown in August, and shoot biomass was harvested at the end of the vegetation period. Cover crop shoot biomass was dried, and the share of each species and the sown test weed (Brassica napus L.) were determined.ResultsThe share of shoot biomass of a cover crop species in dual-species mixtures was closely related to its shoot biomass in its pure stand. In both years, mustard and phacelia showed similar interactions in shoot biomass production when growing with a second species. Regarding competitiveness against weeds, cruciferous species outperformed other cover crop species and could suppress weeds even if they were mixed with a less competitive partner. Weed suppression of mixtures with phacelia depended on the second component in the mixture and was more effective in a dry season. Legume species, especially Egyptian clover and common vetch could not suppress weeds in a pure stand.DiscussionOur results show that species with high weed suppression potential as single stands retain this ability in dual cover crop mixtures, regardless of the suppression potential of the second species that completes the mixture.

Abstract Laser weeding may contribute to less dependency on herbicides and soil tillage. Several research and commercial projects are underway to develop robots equipped with lasers to control weeds. Artificial intelligence can be used to locate and identify weed plants, and mirrors can be used to direct a laser beam towards the target to kill it with heat. Unlike chemical and mechanical weed control, laser weeding only exposes a tiny part of the field for treatment. Laser weeding leaves behind only ashes from the burned plants and does not disturb the soil. Therefore, it is an eco-friendly method to control weed seedlings. However, perennial weeds regrow from the belowground parts after the laser destroys the aerial shoots. Depletion of the belowground parts for resources might be possible if the laser continuously kills new shoots, but it may require many laser treatments. We studied how laser could be used to destroy the widespread and aggressive perennial weed Elymus repens after the rhizomes were cut into fragments. Plants were killed with even small dosages of laser energy and stopped regrowing. Generally, the highest efficacy was achieved when the plants from small rhizomes were treated at the 3-leaf stage.

This document is a corrigendum for a scientific article titled "Side-effects of laser weeding: quantifying off-target risks to earthworms and insects." The corrigendum includes adjustments to the dosages mentioned in the abstract and introduction, as well as clarifications in various sections regarding the laser energy doses used and their effects on different organisms. These corrections ensure that the information presented in the article is accurate. The errors in the original article have been addressed and do not impact the scientific conclusions. [Extracted from the article]

With challenges posed by chemical and mechanical weed control, there are now several research and commercial projects underway to develop autonomous vehicles equipped with lasers to control weeds in field crops. Recognition systems based on artificial intelligence have been developed to locate and identify small weed seedlings, and mirrors can direct a laser beam towards the target to kill the weed with heat. Unlike chemical and mechanical weed control, laser weeding only exposes a small area of the field for the treatment. Laser weeding leaves no chemicals in the field after the treatment or does not move the soil which may harm crop roots and non-target organisms. Yet, it is wellknown that laser beams can harm living organisms; the effect on the environment and fauna should be studied before laser weeding becomes a common practice. This project aimed to study the effect of laser on some living non-target organisms. We investigated the effect of laser treatment on the mortality of two species of earthworms (Enchytraeus albidus and Enchytraeus crypticus), larvae, pupas, and beetles of yellow mealworm beetles (Tenebrio molitor) and the two-spotted lady beetle (Adalia bipunctata) for increasing dosages of laser energy. In all earthworms experiments except one, the mortality rates of the worms living in the uppermost soil layer of clay, sandy, and organic soil exposed to laser heating were not significantly different from the controls even with laser dosages up to 23.8 J mm-2. Laser doses sufficient to kill plants were lethal to the insects, and lower doses that did not kill plants, killed or harmed the insects across all life stages tested. The larger beetles survived higher doses than smaller. Laser weeding is a relatively new technology and not yet widely practiced or commercialized. Therefore, we do not discuss and compare the costs of the different weeding methods at this early stage of the development of the technology. [ABSTRACT FROM AUTHOR]

Farmers are greatly interested in reducing weed seeds in their fields to avoid unnecessary weed infestation. Autonomous vehicles equipped with plant recognition systems and lasers can be used to control weed plants and may therefore be used to replace or supplement herbicides and mechanical weed control. However, less is known about the ability of laser to control weed seeds. In this study, seeds of weeds (Alopecurus myosuroides, Anisantha sterilis, Avena fatua, Centaurea cyanus, Silene noctiflora) and crops (wheat (Triticum aestivum), maize (Zea mays)) were exposed to increasing dosages of laser energy. The species represented dicots and monocots with different seed sizes and morphology. We used a thulium-doped 50 W fiber laser with a wavelength of 2 µm and a diameter of 2 mm developed for weed control. The seeds were exposed to laser directly on the seed surface or after been covered with soil (2.5 and 5 mm). Small doses of energy (0.4 J mm-2 and 0.8 J mm-2) affected the germination ability of small seeds (S. noctiflora and C. cyanus) when the seeds were irradiated directly on the seed surface, and they were completely burned at the high doses (8.0 J mm-2 and 15.9 J mm-2). However, there was not a clear relationship between seed size and sensitivity to laser dose. Additionally, increasing the laser dose on the seed surface resulted in increasing infection of fungi. Seeds covered with soil were not affected by the laser treatments except C. cyanus seeds. Controlling large seeds on the ground while weed seedlings are controlled with laser robots seems realistic in the future. However, dosages higher than 50 J (~15.9 J mm-2) is necessary to control large seeds. [ABSTRACT FROM AUTHOR]

Echinochloa crus-galli (L.) Beauv. is a stronger competitor of rice for resources than other weeds. An adequate knowledge of the biology, ecology and critical period of competition of E. crus-galli with dry-seeded rice (DSR) is fundamental in designing effective, sustainable and integrated weed management programs. Experiments were conducted in the 2013 dry and wet seasons to determine the effect of two E. crus-galli densities (40 and 80 plants m−2) emerging at four intervals (2, 15, 30 and 45 d after rice emergence, DARE) with and without rice interference on the growth and biomass accumulation of both rice and weed, and the productivity of rice. The E. crus-galli plant height decreased with the interference of rice plants. The maximum height of 115–130 cm and number of tillers of 477–508 m−2 in rice plants were recorded when grown alone, and these growth parameters declined to 105–109 cm and 315–352 m−2, respectively, when rice emerged simultaneously with E. crus-galli. Other rice growth parameters (stem, leaf, panicle and shoot biomass, and leaf area) and grain yield attributes (panicle density, per panicle filled spikelets and grain weight) decreased significantly with increases in E. crus-galli density at the early emergence time. A delay in E. crus-galli emergence from 0 to 45 DARE caused a significant reduction in E. crus-galli biomass, which resulted in less reduction in rice biomass and leaf area index. Rice grain yield, grain weight, and harvest index improved significantly with a delay in weed emergence up to 45 DARE. The highest grain yield was recorded when rice was grown alone (6.8–7.3 t ha−1), which was similar to the yield produced in the plots wherein E. crus-galli sown at 40 plants m−2 (6.9–7.0 t ha−1) and 80 plants m−2 (6.4–6.7 t ha−1) emerged at 45 DARE. The lowest grain yield (4.3–4.9 t ha−1) was recorded in the plots wherein E. crus-galli emerged simultaneously with rice. This study established that E. crus-galli emergence at 45 DARE could not cause an economic yield loss because of less biomass accumulation and lower survival rate. [ABSTRACT FROM AUTHOR]

A field experiment was conducted entitled 'Integrated weed management in finger millet (Eleusine coracana L.)' to standardize different practices for managing weeds in finger millet and to assess the economics during the rabi season (2022) at the Instructional Farm II, Karuvacheri, College of Agriculture, Padannakkad, Kerala. Field experiment was laid out in Randomized Block Design with ten treatments and three replications. Different treatments have imparted significant impact for different weed control parameters viz., weed density, weed dry weight and Weed Control Efficiency (WCE). Pre-emergent herbicide application delayed the emergence of weeds during the initial period of crop growth and further weed emergence could be managed by the application of post emergent herbicide and mulching respectively. Even though chemical weed management delivered better results for various parameters, Integrated Weed Management (IWM) was equally effective in managing diverse life cycles and survival strategies of weeds. Hence, pre-emergent application of bensulfuron methyl + pretilachlor followed by mulching was selected as the effective IWM tool for finger millet as sole dependence on herbicides would lead to excess use, resistance development, etc. Hand weeding at 20 and 40 DAS was also proved to be an effective weed management strategy in finger millet but due to high labour cost and their unavailability at crucial time cannot be recommended as an economically feasible method. [ABSTRACT FROM AUTHOR]

Herbicide resistance in western Canada has increased interest in alternative weed management strategies. Physical impact mills, a form of harvest weed seed control, have been identified as a strategy that may be well suited for Canadian use. The efficacy of the Harrington Seed Destructor, a physical impact mill, was evaluated in 20 producer fields in Alberta on a wide spectrum of weed species over 3 years. Significant differences in weed densities between the physical impact mill treatment and the regular harvest densities were few; however, some population density reductions were observed. Measurable reductions in weed densities may have been limited by the short timeframe of the experiment, the high initial densities of the weeds, or the targeted weed species having dormancy or longer term seedbanks. Additionally, identified knowledge gaps on how best to optimize physical impact mill efficacy may have reduced the efficacy of the physical impact mill in this study. This study showed no conclusive evidence for the efficacy of a physical impact mill on tested weed species under field conditions. However, it did provide a number of important considerations for future studies. [ABSTRACT FROM AUTHOR]

Weed infestation is detrimental to crop yield and quality, limits farm size, increases the cost of production, reduces profit, and impairs farmers' livelihood. This study was conducted to assess the weed infestation status based on the farmers' perspective, the control measures adopted, and the potential weed problem in some agrarian communities in Derived Savanna agroecology. A Structured questionnaire was administered to one hundred and ten (110) farmers. Data were analyzed using the Descriptive analysis method. Most (75.5%) of the farmers were male and almost half (43.6%) had the mean farming experience of 22.46±9.99, while 46.4 percent had within 11-15 years of formal education. However, the mean age was 49.93±10.70 years. Most farmers (90%) had the lowest income level (N10000 - N50000). Farmers (25% - 50%) identified Cyperus rotundus, Imperata cylindrica, Tridax procumbens, Commelina bengalensis, Emilia sonchifolia, Axonopus compressus, Tithonia diversifolia, Pennisetum purpureum, and Euphorbia heterophylla as problematic weeds. Farmers understood and adopted manual weeding (100 %), and chemical (98.2 %) weed control methods. However, few farmers (2.7%) knew or adopted the concept of integrated weed management and biological weed control (3.6 %) methods for weed management. The farmers' perception of weed infestation might be useful in early warning systems for preventing and managing noxious weeds and ensuring sustainable crop production. The training of farmers on the principles of integrated weed management (IWM) for effective weed control, improved crop yield, and livelihood is essential. [ABSTRACT FROM AUTHOR]

In recent years, interest in natural products with herbicidal activity as new tools for integrated weed management has increased. The European Union is demanding a reduction in the number of herbicides used, forbidding use of the most toxic ones, despite the problem of weed resistance increasing. Pelargonic acid (PA) is the only natural herbicide available in Spain. In this work, two field assays were performed with the natural compounds carvacrol (CAR), citral (CIT), eugenol (EUG), thymol (THY), p-cymene (P-CYM), (PA), and the combination of PA with CIT—all except P-CYM formulated by Seipasa—to test their herbicidal efficacy in real conditions. They were compared with commercial PA, glyphosate (GLY) and oxyfluorfen (OXY). In both experiments, GLY achieved the best weed control. Considering the natural herbicides, PA formulated by Seipasa and PA plus CIT were the most effective. From both experiments, some conclusions can be extracted for better herbicidal performance of natural products: (1) use products on sensitive weed species, (2) treat weeds at earlier phenological stages, (3) find the active doses in field conditions, (4) cover weeds well when treating, (5) ensure adequate formulation of products, and (6) develop a strategy for correct application. [ABSTRACT FROM AUTHOR]

Soil degradation and climate change put stress on cultivated plants necessitating sustainable weed management practices that reduce herbicide usage and environmental pollution. Cover cropping has emerged as a viable alternative since it has many advantages over traditional herbicides in terms of cultivated plants, soil health, and weed suppression. This three-year study (2020–2023) aimed to examine the performance of cover crops (grass pea, berseem clover, common vetch + triticale, and phacelia) in a drip-irrigated vineyard with restricted water supply in southern Türkiye. The parameters monitored to evaluate the competition between cover crops and weeds were coverage, height, light intensity, shade capacity, dominance, density, and biomass. The common vetch + triticale mixture displaying the highest suppression rates followed by grass pea and phacelia. Cover crops’ height was inversely associated with weed biomass, which suggests that they have the potential to be effective weed management tools because it may provide substantial shading as well as competing performance. The findings of the study highlights the importance of environmentally friendly practices as cover cropping in reducing herbicide reliance and in promoting sustainable vineyard agriculture. Furthermore, the observations of cover crops align with the objectives of the Green Deal suggest a promising approach that enhances soil health be considered to conserve water and foster a more resilient agricultural ecosystem. [ABSTRACT FROM AUTHOR]

We investigated the allelopathic effects of methanol and chloroform extracts from two invasive plant species, (Lantana camara and Broussonetia papyrifera), on radish seed germination and lettuce seedling development. The experiments employed radish seed germination assays, seedling growth measurements and the sandwich technique to evaluate the phytotoxicity of the extracts. The results revealed a concentration-dependent inhibitory impact on radish seed germination, with L. camara methanol extract exhibiting the highest suppression (72.85 ± 2.69 %) at 10,000 ppm. Comparative analyses between L. camara and B. papyrifera extracts demonstrated variations in their effects on root and hypocotyl development. Furthermore, the study explored the impact of these extracts on the germination index of radish seeds, indicating a progressive decline in seed germination rates with increasing extract concentrations. B. papyrifera methanol extract at 10,000 ppm showed the highest germination inhibition (60.48 ± 1.77 %). The sandwich technique, applied to lettuce seedlings, highlighted significant root and hypocotyl inhibition with increasing concentrations of L. camara and B. papyrifera extracts. Phytochemical analyses identified various compounds, including alkaloids, tannins, glycosides, flavonoids and phenols in both methanol and chloroform extracts. The presence of these compounds, especially phenolic chemicals, alkaloids and saponins is implicated in the observed phytotoxic effects. The study concludes that extracts from these invasive plants possess potent allelopathic properties, with implications for agricultural and environmental management. The findings emphasize the importance of understanding allelopathic interactions in developing sustainable strategies for crop protection and invasive species control. [ABSTRACT FROM AUTHOR]

Ambrosia artemisiifolia has turned into a noxious weed species in agricultural fields and landscapes in Europe. Durable control options are still needed to limit the abundance of this species. Weed seed consumption by naturally occurring seed predators is a key ecosystem service in agricultural areas. Seed predation levels of common ragweed were examined in wheat and maize fields and adjacent semi-natural habitats (SNHs). To evaluate the weed seeds’ exposure to invertebrate seed predators, 20 cards each were set on the soil surface inside the crop field and in SNHs with four replications. Twenty seeds of ragweed were attached to sandpaper. Seed removal was assessed every 24 h of exposure for 5 days in June and November 2019, October 2020, and June 2021. The seed consumption level was measured according to the number of removed seeds from the seed cards. High consumption rates of ragweed seeds were found in all sampling rounds in both seasons and habitats. The seed predation rates in 2019 were stronger within crop fields in summer than in autumn with a slight difference between SNHs and inside fields. Our results demonstrate the possibility of seed predation contributing to Integrated Plant Protection (IPM) of common ragweed in rural areas.

Annual ryegrass (Lolium rigidum) is a problematic weed in winter crops and fallows in the southeastern cropping region (SCR) of Australia. This weed has evolved resistance to multiple herbicide groups, globally. In Australia, L. rigidum is more prevalent in the western and southern regions than in SCR. To assess the herbicide resistance status of L. rigidum, the response of five L. rigidum populations (collected from the SCR) to glyphosate, glufosinate, paraquat, haloxyfop-P-ethyl, and clethodim is determined using dose–response curves. Three parametric logistic models are used to determine the herbicide dose required to achieve 50% survival (LD50) and 50% growth reduction (GR50). The LD50 values for 50% survival at 28 days after treatment range from 1702 g a.e. ha−1 to 8225 g a.e. ha−1 for glyphosate, 1637 g a.i. ha−1 to 1828 g a.i. ha−1 for glufosinate, 141 g a.i. ha−1 to 307 g a.i. ha−1 for paraquat, 11 g a.i. ha−1 to 107 g a.i. ha−1 for haloxyfop-P-ethyl, and 17 g a.i. ha−1 to 48 g a.i. ha−1 for clethodim. The resistance factor, based on GR50 value, is highest in the S7 population (2.2 times) for glyphosate, the S11 population (2.3 times) for glufosinate, the S11 population (2.0 time) for paraquat, the S7 population (3.9 times) for haloxyfop-P-ethyl, and the S3 population (3.1 times) for clethodim, compared with the susceptible or less tolerant population. The S11 population is found to be resistant to five tested herbicides, based on resistance factors. Similarly, the S3 population is highly resistant to glyphosate, haloxyfop-P-ethyl, and clethodim compared with the W4 population. These results suggest that L. rigidum populations in the SCR exhibit resistance to multiple herbicide groups at labelled field rates. The findings highlight the necessity of adopting an integrated management approach, including the use of residual herbicides, tank mixing herbicides with different modes of action, and rotating herbicides in conjunction with cultural and mechanical control methods.

Weeds compete for environmental resources, leading to reduced soybean yield. In this context, integrated weed management strategies related to cultural control with the use of cover crops are necessary. Our aim was to evaluate weed occurrence in soybean systems with different cover crops. Field studies were conducted at Júlio de Castilhos, Santa Maria, Capão do Leão, Barra do Ribeiro, and Santo Ângelo, Rio Grande do Sul, Brazil. A randomized complete block design with four replications was used. Treatments consisted of black oats (Avena strigosa Schreb.), white oats (Avena sativa L.), rye (Secale cereale L.), hairy vetch (Vicia sativa L.), forage turnip (Raphanus sativus L.), and white clover (Trifolium repens L.) in pure stands or in mixtures. The analyzed variables were relative frequency, density, abundance, and importance value index, similarity index of weeds, dry shoot mass of cover crop, and soybean yield. Cover crops containing white or black oats reduced the relative importance value index of weeds, such as Lollium multiforum, Conyza spp., and Bidens pilosa. Forage turnip, hairy vetch, and white clover showed distinct responses. Black oats and forage turnip did not differ from cover crop mixtures in terms of dry shoot mass and grain yield, being superior to fallow, white clover, and hairy vetch.

Introduction: Herbicide application in tree nurseries is limited because of the potential for chemical injury to the large diversity of trees species grown, the lack of registered products, and increasing restrictions on herbicide use, necessitating the costly practice of hand weeding. Soil solarization can reduce the weed seedbank by trapping solar energy under clear plastic film, resulting in high soil temperatures lethal to imbibed weed seeds and seedlings. The objective of this study was to determine if soil solarization would be an effective weed management strategy in Pacific Northwest, USA, tree production systems. Methods: Field studies were conducted at three commercial tree nurseries in Oregon and Washington over two years to test soil solarization in reducing the naturally occurring weed seedbank and the time required to hand weed fields. Further field and laboratory tests were conducted with five weed species: Poa annua, Polygonum pensylvanicum, Amaranthus retroflexus, Portulaca oleracea, and Cyperus esculentus. Weed seeds and tubers were buried in packets at 5 and 10 cm to determine their viability after 6 weeks of solarization. A laboratory study was conducted with all but C. esculentus to quantify the exposure time at 45, 50, and 55°C required for 90% death (T90). Results: Soil solarization was particularly effective in reducing the emergence of naturally occurring weeds in the fall and winter, when weed emergence was reduced by 94-96%. Emergence was reduced 67-81% during the subsequent spring and early summer. Nine to ten months after solarization, solarized areas had a 52 - 69% reduction in hand weeding time compared to non-solarized areas. In field trials with buried seed and tuber packets, mortality differed by location and depth, with P. annua and P. pensylvanicum having the greatest percent seed mortality followed by A. retroflexus and variable results for P. oleracea and C. esculentus. In lab studies, seed mortality differed depending on species and temperature; however, at 55°C, there was a relatively rapid drop in seed viability for all species, and T90 values ranged from 1.2 to 41 h whereas at 45° C the range was 47 to > 3000 h. Similar to the field studies, P. annua and P. pensylvancium were more sensitive to heat, followed by A. retroflexus and P. oleracea. Conclusion: Soil solarization can be an effective weed management tool in reducing the weed seedbank in Pacific Northwest tree nurseries and other fallsown crops but may not work for certain, thermotolerant weed species such as C. esculentus. [ABSTRACT FROM AUTHOR]

For decades, herbicides have provided easy-to-use, cost-effective weed management, but alternatives are desired. Consumer preference for chemical-free food, awareness of environmental impacts, regulation increasingly restricting agrichemical use, and increasing prevalence of herbicide resistance are forcing changes to weed management strategies. New Zealand farming must remain sustainable and profitable while responding to changes in its overseas markets, among which are increasing demands for regeneratively grown, safe, high-quality produce. Current reliance on herbicides should be reduced, with more emphasis on preventative management by cultural means, and weed suppression by alternative technologies. The emergence of agritechnologies incorporating automation, machine vision and artificial intelligence, and development of new techniques for weed destruction, offer alternatives that minimise or avoid the requirement for herbicides, avoid soil disturbance and can work effectively in high crop or crop-residue conditions. We have identified electric weeding as a feasible alternative and pulsed electric microshocks as a very low-energy option requiring a fraction of the energy of any other system. Pulsed microshocks enable an integrated weed management system for vegetable and arable crop production combining cultural controls and inexpensive pre-planting treatments with automated application of chemical-free in-crop weed control. Open-source software enables community development of autonomous deployment for niche crops. [ABSTRACT FROM AUTHOR]

Rumex obtusifolius (broad‐leaved dock) is a problematic weed that reduces yield and nutritional value of forage in grasslands of temperate regions worldwide. We conducted an on‐farm study to identify management practices and environmental factors that influence the risk of the occurrence of R. obtusifolius in high densities in permanent, productive grasslands used for forage production. Following a common protocol, a paired case–control design was implemented in Switzerland (CH), Slovenia (SI), and United Kingdom (UK) to compare parcels with high densities of R. obtusifolius (cases, ≥1 plant m−2) with nearby parcels free of or with very low densities of the species (controls, ≤4 plants 100 m−2). A total of 40, 20, and 18 pairs were recorded in CH, SI, and UK respectively. Parameters measured included data about management practices and history, vegetation cover and composition, and soil nutrients and texture. Across countries, increased vegetation cover reduced the relative risk of R. obtusifolius occurrence. By contrast, increased soil phosphorus and potassium and high soil bulk density raised the relative risk. These effects were consistent across countries, as no interactions between country and any of the factors were observed. The two indicator species for case parcels, Plantago major and Poa annua, were typical species of disturbed areas and fertile soils, while indicators for control parcels were characteristic of grasslands under medium to high management intensity (e.g., Festuca rubra, Cynosorus cristatus, Anthoxantum odoratum). We conclude that the risk for grassland infestation with R. obtusifolius can be significantly affected by management practices. Prevention measures should target phosphorus and potassium fertilisation to the forage plants' requirements, minimise soil compaction, and maintain dense swards. [ABSTRACT FROM AUTHOR]

As a major staple, rice is at the center of attention given the current challenges related to food security and agriculture sustainability. From the last three decades, labor and water scarcity has led to a switch from traditional hand transplanting to direct seeding. While the latter presents some advantages, it also fosters weeds that are the major threat to rice production. Weedy rice is considered as the worst agricultural weed because it has a strong competitive ability, and as a congeneric of cultivated rice is very difficult to control. Despite its major adverse effects, weedy rice is thriving in all continents. Our aim is to identify some reasons that might explain the low effectiveness of the weed management strategies. For this purpose, we stress that the weedy rice problem is not unique and then, before designing the adequate weed management strategy, one should distinguish between the occurrence, dispersion, adaptation, and proliferation of weedy rice. In addition, the strategy – agronomical or biotechnological - should be adapted given the gene flow vector, either pollen or seeds. [ABSTRACT FROM AUTHOR]

Weeds are the most severe and widespread biological constraint on agricultural production systems and cause damage to cropped and non-cropped lands. They reduce crop yield and degrade the quality of the produce, besides raising the cost of production. The intensification of agriculture in the Green Revolution era attracted chemical fertilizers and dwarf varieties coupled with mono-cropping and irrigation practices, which enhanced crop-associated weeds and the widespread use of herbicides for easy control. Pesticides may kill many organisms, both target and non-target species, in the environment, causing an imbalance in the ecosystem. Despite the significant increase in productivity, the environmental repercussions of industrial agriculture, characterized by the use of high-yielding crop varieties and the extensive application of chemical fertilizers and pesticides, have prompted a quest for more sustainable agricultural practices worldwide. One potential alternative lies in innovative approaches that draw upon ecological insights gleaned from studying natural ecosystems. These approaches aim to create "ecologically intensive" agro-ecosystems. Developing ecologically intensive agro-ecosystems necessitates a deep understanding of the biological dynamics within ecosystems and the integration of traditional agricultural knowledge held by local farmers. Considering the potentiality of appropriate weed management technologies to substantially improve crop productivity, there is an opportunity for the development, popularization, and adoption of effective, economical, and eco-friendly weed management technologies. [ABSTRACT FROM AUTHOR]

Dense beds of aquatic plants are often perceived as nuisance and therefore mechanically removed, often at substantial cost. Such removal, however, may affect a range of ecosystem functions and consequently also the ecosystem services that benefit society.We studied five cases: River Otra (Norway), River Spree (Germany), Lake Kemnade (Germany), Lake Grand‐Lieu (France) and Hartbeespoort Dam (South Africa). In all, nuisance aquatic plant growth is managed, but dominant species, geographic setting and major societal uses are different. We quantified 12 final ecosystem services as flows per area and year in biophysical and monetary terms. Quantified services were food and fodder production, commercial fisheries, hunting and gathering wild products, hydropower production, drinking and irrigation water production, flood prevention, carbon sequestration, active and passive recreation and biodiversity conservation (nonuse).These services were related to aquatic plant cover via a range of ecosystem functions, and the effects were estimated of three plant removal regimes on the relative importance of the quantified ecosystem services and on the total sum of the monetary estimates (total economic value, TEV). The three removal regimes were 'maximum removal', 'current practice' and 'do nothing'.In all five cases, TEV was dominated by different forms of recreation. TEV was highest for Lake Kemnade, where visitor densities were highest. TEV was most sensitive to the different management regimes in Lake Kemnade, because a threshold in aesthetic appreciation was passed in the 'do‐nothing' regime, and in Hartbeespoort Dam, because of the effect on boating and angling. In the other cases, the different removal regimes had little effect on the estimated TEV.Synthesis and applications. Since recreation dominated the estimated societal benefits in the studied ecosystems, also where provision of hydropower, drinking water or irrigation water were relevant, effects on recreation should be a core consideration in the management of nuisance aquatic plants. Furthermore, aquatic plant management strategies will benefit from taking into account the differences in perceived nuisance among different categories of recreative users before engaging in costly removal. [ABSTRACT FROM AUTHOR]

Corn gluten meal (CGM) and soybean meal (SBM) have demonstrated value as bioherbicides and organic fertilizers, but suggested application rates usually target either weed suppression or crop nutrition, not both. The objective of this study was to explore the feasibility of integrating weed and nitrogen management by evaluating effects of increasing seed meal rates within planting holes of plastic mulch film on weed density, soil nitrogen availability, and crop yield in tomato (Solanum lycopersicum) and broccoli (Brassica oleracea). CGM (10% N) or SBM (7% N) were applied at rates of 0.5, 1, 2, 3.5, or 5 g planting hole−1 N (depending on crop and year) after crops were transplanted, and 40 weed seeds per planting hole were seeded. Weed density decreased with increasing seed meal rate, regardless of type, and velvetleaf (Abutilon theophrasti) was more susceptible than the grass weeds tested. Velvetleaf suppression at the 5 g planting hole−1 N rate ranged from 66% to 97%, relative to the weedy control. Soil nitrogen availability increased with the application rate, but ammonium mineralized from seed meals applied at the highest rates were likely phytotoxic to weeds and crops. Seed meals never increased the crop yield and reduced the tomato yield in 2018 by 39% to 64%, relative to the weed-free control. The results suggest that integrating the management of weeds and nitrogen with seed meals in plastic mulch planting holes is not feasible because application rates required for consistent weed suppression are also toxic to crops. [ABSTRACT FROM AUTHOR]

Although herbicides have been a dominant and effective weed control strategy for decades in Western Canada, herbicide resistance and the lack of new modes of action have resulted in weed management challenges. Integrated weed management strategies have been shown to be successful in controlling certain weed species that are problematic in cropping systems. The objective of this study was to investigate integrated weed management strategies that have been successful on individual species to determine their applicability to a multiple weed species that may coexist in a field. In addition, harvest weed seed control was incorporated into these integrated weed management strategies to determine its impact in western Canadian cropping systems. A 5-year rotational study was conducted from 2016 to 2020 at Beaverlodge, Lacombe, and Lethbridge, AB; Scott and Saskatoon, SK; and Carman, MB, that incorporated integrated weed management strategies such as rotational crop diversity (including winter annuals and perennials), increased seeding rates, crop silaging, chaff collection, and with or without in-crop herbicides. This research confirmed success in managing some species of weeds such as wild oat when increased seeding rates, 2 years of early cut silage barley, and competitive winter cereals were incorporated into a cropping system, even when no in-crop herbicides were applied. However, some weed growth morphologies (e.g., twining weeds) or life cycles (e.g., facultative winter annuals) were not managed successfully with this combination of strategies. Chaff collection provided incremental weed control benefits but did not serve as a replacement for herbicidal weed control. Weed densities had an apparent impact on the success of these integrated weed management strategies, suggesting that the sooner they are adopted, the more likely they are to be successful at maintaining or reducing weed densities. This study not only showed the ability to reduce reliance on herbicides with strategies that can be effective in Western Canada but also highlighted the need for further understanding of different weed species and their responses to integrated weed management strategies, as well as the complexity of managing a weed community with integrated weed management. [ABSTRACT FROM AUTHOR]

The essential oil (EO) of Thymbra capitata has been demonstrated to possess herbicidal activity and could be used as an alternative to synthetic herbicides with reduced persistence in soil and new mode of action. Nevertheless, it is necessary to determine the adequate doses for its use, the proper way for its application and the best phenological stage of weeds and crops in which the EO should be applied to obtain maximum efficacy against weeds without compromising crop production. In this work, T. capitata EO was tested at three different concentrations against weeds grown from a citrus orchard soil seedbank untreated with herbicides and against three important weed species grown in substrate to determine the efficacy of the concentrations on different weed species. All experiments were carried out under greenhouse conditions. To find out the best way for applying the EO, it was applied by irrigation and by spraying on the targeted weeds, and to verify the influence of timing, it was tested on Lolium rigidum at two different phenological stages and on wheat at a later phenological stage than weeds. The highest concentration tested (12 µL·mL−1) showed the best performance to control weeds. The more effective mode of application was by spraying on dicotyledons and by irrigation on monocotyledons at the earliest phenological stage. T. capitata EO was phytotoxic for wheat. More trials in different crops are needed to determine the best conditions for its use. [ABSTRACT FROM AUTHOR]

The weed control efficacy (WCE) of mechanical weeding in the inter‐row area in conventional cropping systems can achieve more than 90%. Despite the use of special intra‐row tools (e.g., finger weeders), only a WCE of 65%–75% can currently be realized in the intra‐row area. To close the gap between inter‐row and intra‐row WCE, in this study, a new approach for high‐efficacy precise mechanical weeding is presented. By using a GPS‐based pneumatic precision seeder (Kverneland GEOseed), a square crop seeding pattern of 37.5 cm × 37.5 cm was established in maize to enable post‐emergence hoeing lengthwise and transverse to the sowing direction. Thus, the treated area by the hoeing blades is postulated to increase, resulting in higher WCE. For this, six field experiments were conducted in South‐Western Germany in 2021 and 2022. Goosefoot blades and no‐till sweeps were guided automatically using a camera for row detection and a hydraulic side‐shift control for the hoe. This bi‐directional treatment was compared to an herbicide application and to hoeing treatments only along and transverse to the sowing direction. The bi‐directional hoeing treatment increased the WCE compared to hoeing along the crop rows on average from 80% to 95% and was not significantly different from the herbicide applications in 2022. Precise sowing in combination with hoeing along and transverse the crop rows resulted in 5.3% crop losses compared to 2.2% for hoeing only along the sowing direction by using only 15 cm wide goosefoot blades, while in the herbicide treatment and the untreated control no crop losses were detected. While maize biomass was not significantly different from the herbicide treatment in most cases over both years, in 2022, even the grain yield of the bi‐directional hoeing treatment with goosefoot blades (7.8 Mg ha−1) was statistically equal to the herbicide treatment (6.9 Mg ha−1). This study demonstrates the great potential of bi‐directional hoeing as an effective alternative to chemical weed control in row crops such as maize, sunflower and sugar beet. [ABSTRACT FROM AUTHOR]

Agricultural weeds frequently hybridize with each other or with related crop species. Some hybrid weeds exhibit heterosis (hybrid vigor), which may be stabilized through mechanisms like genome duplication or vegetative reproduction. Even when heterosis is not stabilized, hybridization events diversify weed gene pools and often enable adaptive introgression. Consequently, hybridization may promote weed evolution and exacerbate weed–crop competition. However, hybridization does not always increase weediness. Even when viable and fertile, hybrid weeds sometimes prove unsuccessful in crop fields. This review provides an overview of weed hybridization and its management implications. We describe intrinsic and extrinsic factors that influence hybrid fitness in agroecosystems. We also survey the rapidly growing literature on crop–weed hybridization and the link between hybridization and invasiveness. These topics are increasingly relevant in this era of genetic tools for crop improvement, intensive and simplified cropping systems, and globalized trade. The review concludes with suggested research priorities, including hybridization in the context of climate change, plant–insect interactions, and redesigned weed management programs. From a weed management perspective, hybridization is one of many reasons that researchers and land managers must diversify their weed control toolkits. [ABSTRACT FROM AUTHOR]

Objective: In order to evaluate different levels of wheat straw mulch and herbicide on quantitative, qualitative yield and weeds control of fennel (Foeniculum vulgare MIL.) an experiment was conducted arranged as splitplot based on a randomized complete block design (RCBD) with 3 replications at Agricultural Sciences and Natural Resources University of Khuzestan during 2019-2020 growing season. Methods: Treatments included different concentrations of linuron herbicide (0, 1.5, 3, 4.5 L/ha) as the main plot and different levels of wheat straw mulch (0, 3, 6, 9 and 12 tons/ha) as the subplot. Results: The results revealed that the lowest dry weight of broadleaf and grass weeds (73 and 15 g/m2) of 4.5 L/ha herbicide and 9 and 12 tons'/ha mulch was obtained. The highest grain yield was observed (80 g/m2) in 3L/ha of herbicide application and wheat straw mulch 9 ton/ha, and the lowest (18 g/m2) in treatment non-application of mulch and herbicide. The highest essential oil yield of fennel (2.82 g/m2) was obtained in treatment herbicide application (3 L/ha) and straw mulch (9 ton/ha), while in treatment non-application of mulch and herbicide was 0.48 g/m2. Conclusion: Therefore, in integrated weed management, the use of wheat straw mulch could be considered for reducing weeds competition and achieving sustainable agriculture in medicinal plants. [ABSTRACT FROM AUTHOR]

Copyright of Turkish Journal of Weed Science is the property of Gaziosmanpasa Universitesi Matbaasi, Department of Plant Protection, Faculty of Agriculture and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The massive use of herbicides since the 1950s has resulted in increasing problems with herbicideresistant weeds and pollution of the environment, including food, feed, and water. These side effects have resulted in political pressures to reduce herbicide application. The European Commission aims to reduce the use and risk of chemicals and more hazardous pesticides in the EU. Therefore, new weed control methods are in demand. Laser weeding might be an alternative to replace or supplement herbicides and other weed control methods in an Integrated Weed Management (IPM) strategy. This work aimed to investigate how increasing laser energy affected common weeds when the apical meristem was exposed to irradiation at the early stages of development. A 50 W thulium-doped fibre laser with a diameter of 2 mm and a wavelength of 2 µm was used. The highest efficacy of laser irradiation was achieved when the grass weed (Alopecurus myosuroides) had one leaf and the dicot species were at the cotyledon stage. There was a large difference between the species’ susceptibility to irradiation probably caused by differences in morphology and growth habit. At the 4-leaf stage, most of the species regrew after irradiation. Laser weeding may be a solution to replace or supplement other weed control methods in some crops, but in general the weeds must be irradiated when they are at the cotyledon to 2-leaf stage to avoid regrowth.