Search

Background: Endodontic file fractures are common complications of root canal treatment, and requires removal via specialized techniques such as endodontic microsurgery when the file beyond the apical foramen. It is often challenging to precisely and minimally remove a fractured file. Recently the use of dental autonomous robotic system (ATR) has shown promise in precisely and minimally in dental surgery. Therefore, this case details a technique for using the ATR system to precisely and minimally guide the removal of a fractured file beyond the apical foramen., Case Presentation: A 48-year-old male patient, with no evidence of bone defects, was diagnosed with a file fractured completely beyond the apical foramen during root canal treatment of the right maxillary lateral incisor. Patient information was used to incorporate a digital model into preoperative planning software to develop a surgical strategy. The ATR system employs spatial alignment methods for registration, directing the robotic arm to independently locate the fractured file in accordance with the surgical plan. To maximize minimally invasive surgery, the long fractured file was removed in two stages. After removing the bone and fracture file, the clinician performed suturing under a microscope. No complications were observed during the surgery, and the treatment appeared to be successful based on the 9-month follow-up evaluation., Conclusions: The ATR system enables precise localization of the fractured file beyond the apical foramen with intact cortical plates. This technology has the potential to improve positioning accuracy, minimize the need for invasive bone removal, reduce intraoperative time, and facilitate successful endodontic microsurgical procedures., Competing Interests: Declarations. Ethics approval and consent to participate: This study did not involve human or animal subjects’ experiment, and thus no ethical approval was required. The case report adhered to the guidelines established by the journal. Consent for publication: Patient gave their written informed consent for their personal or clinical details along with any identifying images to be published in this case report. Competing interests: The authors declare no competing interests., (© 2024. The Author(s).)

Background: Preservation of a healthy periodontium is critical for the long-term success of restored teeth. In cases of extensive caries, tooth fracture, inadequate crown length, and increased esthetic demands, the restorative margins need to be placed apical to the gingival margin. Violation of the biological width due to dental trauma frequently appears in clinical practice. There are three treatment options for preserving biological width and the ferrule effect: crown lengthening, orthodontic extrusion, and surgical extrusion. This case report describes the surgical intervention and fixed prostheses for crown-root fractured maxillary incisors in a growing patient., Case Presentation: A fourteen-year-old boy was referred from Department of Oral and Maxillofacial Surgery and visited the Department of Pediatric Dentistry after emergency dental treatment. He got hit with a baseball bat and his upper right central and lateral incisors were fractured with pulp exposure. A vertical fracture line extended 2 mm below gingival margin was observed. Surgical extrusion and conventional root canal treatments were performed on both fractured teeth. Surgical crown lengthening was additionally done to preserve the biological width and to make sure of the ferrule effect. Then, these teeth were finally restored with porcelain fused metal crowns., Conclusions: Surgical extrusion and crown lengthening may be considered the most effective treatments to save the teeth instead of coronectomy or extraction for severely fractured teeth. The case described here showed satisfactory esthetic and periodontal outcomes during two years of follow-up, and the patient was satisfied that he could retain his natural teeth., Competing Interests: Declarations. Ethics approval and consent to participate: This study was conducted in accordance with the Declaration of Helsinki and approved by the Institutional Review Board of Pusan Nation-al University Dental Hospital (IRB approval number: PNUDH-2024–09-002), and the approval date was 2024–09-06. Consent for publication: Written informed consent for publication was obtained from the patient and his legal guardian to publish all clinical data and accompanying images. Competing interests: The authors declare no competing interests., (© 2024. The Author(s).)

Our recent studies show that the majority of patients seeking rhinoplasty have inadequate incisor show. Furthermore, some rhinoplasty maneuvers, such as a columella strut, can alter the lip position and consequently the incisor show. We report the senior author's (B.G.) algorithm for tip augmentation technique based on our previous studies and 44 years of keen observation in the field of rhinoplasty. The 5 most common scenarios are described. When there is a short columella with inadequate incisor show, bilateral extended spreader grafts and columella strut with a tapered posterior portion are recommended, serving as a reliable midline septal extension graft supporting the medial crura in a more anterior position with sutures and a positive effect on incisor show. When there is an optimal lip-incisor relationship, a columella strut with a tapered posterior end fixed to the septum, with or without extended spreader grafts, is a better choice to prevent a change in smile. If there is excessive gum show, the optimal tip augmentation technique is a columella strut without tapering or even wider posterior end, with fixation of the columella strut to the septum, with or without extended spreader grafts that will push the upper lip caudally. The remaining scenarios are described in detail. Tip augmentation maneuvers in rhinoplasty can have a significant influence on upper lip position, which is often detrimental to the smile. The preoperative position of the upper lip during smile should play an integral role in the selection of tip augmentation technique., (© The Author(s) 2024. Published by Oxford University Press on behalf of The Aesthetic Society. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site—for further information please contact journals.permissions@oup.com.)

Background: Dens invaginatus (DI), an unusual developmental anomaly is a challenge for the operating dentist with regard to its diagnosis and treatment. This case report presents the successful management of a Type-3b DI in a permanent maxillary lateral incisor associated with a large radicular cyst and communicating apico-marginal defect (Von Arx type IIb)., Methods and Results: A 19-year-old female patient reported pain and palatal swelling. During the clinical examination, tooth #12 exhibited tenderness to percussion, and presented a deep periodontal pocket depth (PPD) of 12 mm, along with grade I mobility. Radiographic examination revealed a large peri-radicular radiolucency with atypical tooth morphology. Cone beam computed tomography clarified the complicated root canal anatomy to be Type-3b DI associated with an apico-marginal defect. The case was managed successfully by non-surgical endodontic therapy followed by surgical intervention utilizing a guided bone regenerative (GBR) approach. Eighteen-month follow-up showed an asymptomatic and functional tooth with a significant reduction in pocket depth. The periapical radiographs showed continued healing of the osseous defect., Conclusions: The successful healing outcome of a challenging case, characterized by a complex DI morphology, a large peri-radicular lesion, a through-and-through defect, and a combined endodontic-periodontal apico-marginal defect was achieved through accurate diagnosis, treatment planning, and execution using contemporary endodontic and periodontal treatment techniques. The application of GBR techniques during the surgical phase of treatment may have contributed to the improved regenerative healing outcome in this case, which was initially considered prognostically questionable., Key Points: Why is this case new information? Type-3b DI exhibits a complex root canal structure, each case displaying unique characteristics, necessitating a case-specific treatment plan. In this case report the Type-3b DI morphology was associated with a large peri-radicular, through and through defect and combined endodontic periodontal apico-marginal defect. The treatment approach involved incorporating guided bone regenerative (GBR) principles during the surgical phase. This case report contributes to the existing evidence on the diagnosis and successful management of Type-3b DI with a concurrent apico-marginal defect. What are the keys to successful management of this case? The successful management of a prognostically challenging case was achieved through a closely integrated multidisciplinary coordination between the endodontist and periodontist. Utilization of contemporary techniques and tools contributed to the successful management The use of three-dimensional radiological examination through cone beam computed tomography enabled a precise preoperative assessment, facilitating the formulation of a treatment plan for managing both the Type-3b DI morphology and the associated peri-radicular lesion. Employing GBR techniques in peri-radicular surgery may have assisted in the healing of through-and-through periapical defects with concurrent apico-marginal defects (Von Arx type IIb). What are the primary limitations to the success of this case? A complex root canal anatomy associated with Type-3b DI morphology A large peri-radicular through and through defect with concurrent apico-marginal defect. Difficulty in weekly and long-term follow-up of the patient., (© 2024 American Academy of Periodontology.)

Successful apical surgery relies on effective magnification and illumination. In the field of endodontics, the microscope has emerged as the predominant tool for meeting these requirements. The rigid endoscope is also a valuable instrument in apical surgery. This study introduces three cases demonstrating the application of endoscope technology in endodontic apical surgery. The first case employs a soft endoscope for treating an anterior tooth with apical periodontitis, the second integrates an endoscope with new attachments for a premolar, and the third combines an endoscope, attachments and navigation for the lower first molar surgery. It revealed that endoscopes offer certain advantages that are not achievable with microscope-assisted surgery, these cases had a great outcome. In the future, a broader application of endoscopic technology in various procedures is anticipated., (© 2024 Australian Society of Endodontology Inc.)

Background: Current evidence acknowledges guided bone regeneration (GBR) as a predictable therapeutic modality in the augmentation of a deficient alveolar ridge. Such deficiencies often reveal inadequate bone volume to support implant placement in a position amenable to prosthetic reconstruction. Additionally, an evolving body of literature demonstrates that membrane fixation may lead to improved clinical bone gain through positively influencing blood clot formation, stability, and the eventual osteogenic potential of the defect. Alternative benefits to membrane fixation, such as reduced graft displacement and reduction in wound micromotion, have also been cited as mechanisms for an increased regenerative response., Methods and Results: The aim of this report was to present a case, including diagnosis, treatment, and follow-up for the reconstruction of a horizontal ridge deficiency. The patient's deficiency in ridge volume was found to be a developmental sequelae of lateral incisor agenesis, resulting in an underdeveloped midfacial region of the alveolar process subjacent to sites #7 and #10. The fixation protocol outlined in this report demonstrated adequate horizontal ridge augmentation to facilitate future prosthetic reconstruction with the use of implants., Conclusions: Numerous protocols have been established in an attempt to achieve effective barrier membrane stabilization for bone augmentation procedures. However, some techniques are poorly suited for the anatomically challenging region of the anterior maxilla. A case report describing the utilization of the anterior nasal spine for anchorage of a membrane-stabilizing suture may present a novel, safe, and effective technique for stabilizing the intended region of augmentation, as well as preventing graft migration beyond the membrane-maxilla interface. Key points Regarding guided bone regeneration (GBR) procedures, micromotion of the membrane or of the underlying particulate graft may negatively influence the volume of the augmented site. The ability to adequately stabilize the graft-membrane interface is recognized as a necessary prerequisite to predictably achieve optimal surgical outcomes. To the authors' knowledge, there is no clinical or scientific evidence regarding the use of the anterior nasal spine for membrane anchorage in maxillary GBR procedures, and thus a novel approach to membrane stabilization is introduced., (Published 2024. This article is a U.S. Government work and is in the public domain in the USA.)

Endodontic microsurgery guided by navigation systems represents a precise and minimally invasive approach for retreatment of apical periodontitis following failed conventional endodontic therapy. Accurate localization and minimal access to the root apex are paramount for successful outcomes and preservation of anatomical structures. Workflow considerations, such as three-dimensional (3D) virtual planning and endodontic guidance represent new crucial aspects for addressing complex cases. This clinical case report presents the successful reintervention of a complex case using a Zekrya bur, operative microscopy, cone beam computed tomography and biocompatible materials. After a 48-month follow-up, complete healing of the treated area was observed. This minimally invasive technique, employing a simple instrument widely available globally, underscores the potential for efficient and predictable outcomes in complex endodontic microsurgical retreatment., (© 2024 Australian Society of Endodontology Inc.)

Gingival fenestration is a relatively uncommon soft tissue lesion in which the root apex is exposed in the oral environment after the destruction of the overlying buccal bone plate and mucosa. At present, no clear etiology or treatment guidelines exist for gingival fenestration. This article reports three successfully treated cases of gingival fenestration associated with chronic periapical infection and can help contribute to treatment guidelines for gingival fenestration. All cases were treated with apicoectomy in conjunction with a connective tissue graft (CTG), and the first steps of each case were as follows: endodontic therapy with root-end resection and retrograde filling, then regenerative surgical therapy. However, slightly different regenerative treatment methods were used during the operation according to the different patient conditions. In Case 1, gingival fenestration in the mandibular left first premolar was treated using a xenograft and CTG. In Case 2, gingival fenestration in the maxillary left lateral incisor was treated using advanced platelet-rich fibrin (A-PRF) and CTG. In Case 3, gingival fenestration in the mandibular left second premolar was treated using CTG. Endodontic treatment was combined with periodontal surgery to achieve predictable results. After 13 to 25 months of follow-up, all cases showed well-healed gingival fenestrations and no discomfort. These three cases show the possibility of using apical excision combined with a CTG and/or bone graft/A-PRF in the treatment of gingival fenestration. Reporting these three cases may help advance the field of gingival fenestration treatment.

Objectives: This case report describes a digital workflow for designing and 3D printing a guide with the dual purpose of gingivectomy and tooth preparation in the esthetic zone, to be followed by cementation of ceramic veneers under rubber dam isolation., Clinical Considerations: The patient's primary concern was to improve her smile. After clinical evaluation, our recommendation was for a minimal gingivectomy to match the gingival zenith for both central incisors, to be followed by ceramic laminate veneers. A digitally designed and 3D printed guide was used for gingivectomy and tooth preparation for the ceramic veneers. Ceramic veneers were cemented under rubber dam isolation to maximize bonding properties., Conclusions: A single guide can be digitally designed and 3D printed to perform controlled gingivectomy and minimally invasive tooth preparations. The outcome of the gingivectomy improved the gingival architecture for central incisors, and the ceramic veneers fulfilled the patient's esthetic demands., (©Operative Dentistry, 2024.)

Objective: The preoperative inclination angle of mandibular incisors was crucial for surgical and postoperative stability while the effect of proclined mandibular incisors on skeletal stability has not been investigated. This study aimed to evaluate the effects of differences in presurgical mandibular incisor inclination on skeletal stability after orthognathic surgery in patients with skeletal Class III malocclusion., Methods: A retrospective cohort study of 80 consecutive patients with skeletal Class III malocclusion who underwent bimaxillary orthognathic surgery was conducted. According to incisor mandibular plane angle (IMPA), patients were divided into 3 groups: retroclined inclination (IMPA < 87°), normal inclination (87° ≤ IMPA < 93°) and proclined inclination (IMPA ≥ 93°). Preoperative characteristics, surgical changes and postoperative stability were compared based on lateral cephalograms obtained 1 week before surgery (T0), 1 week after surgery (T1), and at 6 to 12 months postoperatively (T2)., Results: The mandible demonstrated a forward and upward relapse in all three groups. No significant differences in skeletal relapse were observed in the 3 groups of patients. However, the proclined inclination group showed a negative overbite tendency postoperatively compared with the other two groups and a clinically significant mandibular relapse pattern. Proclined IMPA both pre- and postoperatively was correlated with mandibular relapse., Conclusion: Sufficient presurgical mandibular incisor decompensation was of crucial importance for the maintenance of skeletal stability in patients with skeletal Class III malocclusion who subsequently underwent orthognathic surgery., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Masson SAS. All rights reserved.)

This study explores the potential application of computer aided design (CAD)/computer aided manufac-turing (CAM) for one-piece glass fiber posts and cores in restoring tooth defects post-removal of a broken fiber post using a digital guide plate. This paper reports a fractured left upper incisor fiber post removed using a customized needle and digital guide plate. Following root canal retreatment, CAD/CAM integrated fiber post-core and zirconia full crown restoration were completed. The occlusion testing was conducted using the T-Scan Ⅲ system. This study offers insights for managing secondary repair after fiber post fractures.

Concrescence is a rare dental anomaly in which two adjacent teeth are united only by their cementum. Concrescence most frequently occurs in molars, especially a third mandibular molar and a supernumerary tooth. It is rarely seen in the maxillary anterior teeth. This case report is the first in the literature which details the successful treatment of a concrescence between the maxillary central incisor and a supernumerary tooth through multidisciplinary therapy. The treatment plan included root canal treatment, endodontic microsurgery, and prosthodontic treatment.

Background: Maxillary central incisors (MCI) are the third most impacted teeth. Timely multidisciplinary management is indicated as unerupted incisors can cause functional- and appearance-related distress., Aim: To assess the patient journey for children with unerupted MCI, including referral, clinical assessment, surgical management and follow-up treatment, and highlight areas for improvement, as well as identify factors impacting orthodontic treatment burden (OTB)., Design: A retrospective service evaluation of children aged 6-16 years who had surgical management of unerupted MCI under general anaesthetic (GA) between 2018 and 2021., Results: Fifty-two children with 62 unerupted MCI were identified. Mean age at referral was 8.8 years. Most children (82.7%) had supernumerary teeth in the anterior maxilla. Mean time between listing for GA and surgery increased from 4.3 to 15.2 months following the COVID-19 lockdown. Mean age at surgery was 10.4 years. Supernumerary removal and incisor exposure and bond was the most common treatment (56.6%). Most patients required hospital orthodontic treatment post-surgery (65.4%)., Conclusion: Most children referred were below 9 years (60.1%); these children had reduced OTB compared to those who had been referred at an older age. Stage of root development was also a significant predictor in OTB. An unexpected finding was that conical supernumeraries were found to prevent MCI eruption., (© 2023 The Authors. International Journal of Paediatric Dentistry published by BSPD, IAPD and John Wiley & Sons Ltd.)

Introduction: Incisor malocclusion in rabbits (Oryctolagus cuniculus) is a common clinical problem seen in general practice. Given that the growth rate is about 2 mm per week, a lack of wear quickly leads to feeding difficulties and soft tissue injuries. Therefore, pathologically elongated incisors must be shortened every three to six weeks. The goal of this study was to assess the potential adverse effects on dental and periodontal tissues associated with the three most commonly used trimming methods: nail cutter, diamond-coated cutting disc and diamond burr. The left mandibular incisor of 28 healthy New Zealand rabbits was subjected to four trimmings with one of the three cutting methods. After the fattening period, the mandibles were collected and both mandibular incisors were investigated on dental radiographs, micro-computed tomography scans and histological sections. Dental and periodontal tissue changes were evaluated. This study allowed a more accurate statement of the potential short-term adverse effects of the three trimming methods. At the clinical level, the nail cutter caused the formation of an irregular occlusal surface with sharp edges. Both engine-drive methods allowed the attainment of a smooth surface but the disc was less accurate. Histological evaluation revealed that the primary modifications, including coronal fractures, periodontal ligament widening and inflammation, reparative osteodentine, paracementosis and biofilm accumulation, were found in the nail cutter group.

Orthodontic cases requiring tooth extraction sometimes involve post-traumatic incisors. For adolescent cases in which trauma causes the maxillary unilateral incisors to be missing or have poor prognoses, it is worth considering these teeth as candidates for extraction, and this unusual approach is seldom reported in the literature. An adolescent patient with a missing maxillary left lateral incisor and an ankylosed maxillary left central incisor sought treatment for dental protrusion and crowding. An unusual orthodontic approach was used, which involved the extraction of the maxillary left central incisor and mandibular first premolars. After treatment, the maxillary right central incisor was successfully translocated across the midpalatal suture and transformed into the left central incisor. Additionally, well-aligned teeth and enhanced smile aesthetics were achieved, and the treatment outcomes remained stable throughout the follow-up period., (© 2024 Australian Society of Endodontology Inc.)

The aim of this study was to present a periodontal plastic surgery approach to treat gingival recessions (GRs) and correct mandibular incisor mucogingival conditions and deformities. Isolated deep GRs (≥ 3 mm) in the mandibular incisors (n = 24 teeth) were treated: 66.6% of sites were recession types 2 or 3, and 58.3% of teeth were malpositioned. Recessions were treated using free mucogingival grafts (FMGs) harvested from the buccal aspect of donor teeth with altered passive eruption or healthy periodontal support, with < 3 mm between the cementoenamel junction and the buccal alveolar crest. Clinical parameters (GR, clinical attachment level, interproximal papilla tip location, keratinized tissue, vestibule depth) and root coverage esthetic score were evaluated at 9 months. FMG significantly reduced GR (P < .001) and increased keratinized tissue (P < .001) without loss of vestibule depth (P > .05). Mean root coverage was 94.37% ± 10.60%, mean residual GR was 0.08 ± 0.65 mm, and the mean root coverage esthetic score was 8.9 ± 1.24. Recession types 2/3 showed significant interproximal clinical attachment gain (P < .05). The interproximal papilla was significantly augmented at sites with papilla loss (P < .001). No clinical attachment loss (P = .346) was detected at donor sites. These results suggest that FMG is a promising root coverage approach for recession types 1, 2, and 3, correcting mucogingival conditions and deformities and reconstructing the interproximal papilla.

Background: Pulpotomy as a minimally invasive pulp therapy technique is the treatment of choice for carious pulp exposures, however many pediatric dentists perform pulpectomies in vital primary incisors. The aim of this split mouth randomized controlled study was to compare formocresol pulpotomy and zinc-oxide and eugenol pulpectomy in the treatment of vital pulp exposure in primary incisors., Methods: Contralateral pairs of incisors were randomly assigned to receive pulpotomy or pulpectomy in children aging from 18 to 66 months old and were followed up for 12 months., Results: 39 pairs of incisors were included. Clinical and radiographical success rates showed no statistical significant difference (p = 1, p = 0.8 respectively). Relative risk measures for clinical success rates (RR = 1.03, 95%CI 0.87 to 1.23) and for radiographic success rates (RR = 1.03, 95%CI 0.83 to 1.29) with CIs including number one showing no difference between the two groups. The Survival rate using Kaplan-Meier survival analysis score showed 82% for pulpotomy and 74% for pulpectomy at 12 months (P = 0.2)., Conclusions: Both pulpotomy and pulpectomy techniques can be used successfully in the treatment of carious vital pulp exposure in primary incisors., Trial Registration: The trial was retrospectively registered in Clinicaltrials .gov with this identifier NCT05589025 on 21/10/2022., (© 2024. The Author(s).)

This case report describes a 19-year-old woman with skeletal Class I crowding and an unsalvageable maxillary right central incisor. She visited our clinic with the chief complaint of mobility of the maxillary right central incisor due to a traffic accident. After extraction of the maxillary right central incisor, the space was closed orthodontically. All the maxillary right teeth were moved mesially with an elastic chain attached to a palatal lever arm which was connected to palatal temporary anchorage devices (TADs). After orthodontic treatment had been completed, the maxillary right lateral incisor and peg-shaped left lateral incisor were restored with a porcelain laminate veneer. The maxillary right canine was morphologically reshaped and built up with composite resin. Consequently, esthetically ideal occlusion and functional lateral guidance with uncontacted molars were obtained. These results show that mesial movement of the entire dental arch with TADs is a useful orthodontic treatment option in patients in whom the maxillary central incisor has been extracted.

When restoring severely compromised teeth, respecting the supracrestal tissue attachment and retaining the most coronal and radicular tooth structure is essential to achieving a sufficient ferrule. Forced orthodontic extrusion is a minimally invasive method that allows hard- and soft-tissue conservation. This article describes the treatment of a severely damaged maxillary central incisor that was managed by using a simplified orthodontic extrusion method with intracoronal elastic and metal ligatures applied through a palatal bar and followed by the biologically oriented preparation technique (BOPT). This orthodontic procedure reduces a forward clockwise advance during vertical extrusion, thus maintaining the buccal bone plate., (Copyright © 2022 Editorial Council for The Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Introduction: Functional genioplasty aims to achieve lip competence at rest and reduces lip pressure against the mandibular incisors. The purpose of this study was to describe the radiographic changes in alveolar bone of the mandibular incisors after functional genioplasty., Materials and Methods: Cone beam CT images from 36 patients were compared between immediate (T0) and delayed postoperative period (T1). The mean time to complete the second imaging was 10.9 ± 4.7 months. Dental and bone parameters were assessed: the vestibular bone height (BH), the bone thickness (BT) with regard to the apex of the central incisor (BT2) and at equidistance between the cementoenamel junction and the dental apex (BT1). The existence of fenestrations, the apical-root resorption and the incisor-mandibular plane angle (IMPA) were also collected., Results: No significant change occurred in the BH. BT was improved of a mean 47.9% and 53.6% at the BT1 level on #31 and #41, respectively (p 1 =0.01 and p 2 =0.02, respectively); and of 53.0% at the level of the apex of both mandibular central incisors (p 1 =0.003 on #31 and p 2 =0.009 on #41). No difference in the number of fenestrations was observed between T0 and T1. A significant decrease in the root length on both mandibular incisors was observed on the delayed CBCT (from 21.96 ± 1.35 to 21.68 ± 1.32 mm for #31, p=0.0007; from 22.26 ± 1.66 to 21.96 ± 1.48 mm for #41, p=0.002). Finally, the IMPA remained stable between the two examinations with a mean 106.1 ± 7.38° vs 105.8 ± 6.51° (p=0.38)., Conclusion: Functional genioplasty favours the alveolar bone formation of the mandibular central incisors, probably by direct bone grafting, but also by the relaxation of the perioral and chin musculature., Competing Interests: Declaration of Competing Interest The authors have no conflict of interest to declare., (Copyright © 2023 Elsevier Masson SAS. All rights reserved.)

Background: Apical palatal bone is important in immediate implant evaluation. Current consensus gives qualitative suggestions regarding it, limiting its clinical decision-making value., Objectives: To quantify the apical palatal bone dimension in maxillary incisors and reveal its quantitative correlation with other implant-related hard tissue indices to give practical advice for pre-immediate implant evaluation and design., Material and Methods: A retrospective analysis of immediate implant-related hard tissue indices in maxillary incisors obtained by cone beam computed tomography (CBCT) was conducted. Palatal bone thickness at the apex level (Apical-P) on the sagittal section was selected as a parameter reflecting the apical palatal bone. Its quantitative correlation with other immediate implant-related hard tissue indices was revealed. Clinical advice of pre-immediate implant assessment was given based on the quantitative classification of Apical-P and its other correlated immediate implant-related hard tissue indices., Results: Apical-P positively correlated with cervical palatal bone, whole cervical buccal-palatal bone, sagittal root angle, and basal bone width indices. while negatively correlated with apical buccal bone, cervical buccal bone, and basal bone length indices. Six quantitative categories of Apical-P are proposed. Cases with Apical-P below 4 mm had an insufficient apical bone thickness to accommodate the implant placement, while Apical-P beyond 12 mm should be cautious about the severe implant inclination. Cases with Apical-P of 4-12 mm can generally achieve satisfying immediate implant outcomes via regulating the implant inclination., Conclusions: Quantification of the apical palatal bone index for maxillary incisor immediate implant assessment can be achieved, providing a quantitative guide for immediate implant placement in the maxillary incisor zone., Competing Interests: Declaration of Competing Interest The authors declare that they have no conflicts of interest in connection with this work., (Copyright © 2023 Elsevier Masson SAS. All rights reserved.)

Background: This study aimed to evaluate the load capacity of maxillary central incisors with simulated flared root canal restored with different fiber-reinforced composite (FRC) post cemented with either self-adhesive or self-etch resin cement and its mode of fracture., Methods: Sixty-five extracted maxillary incisors were decoronated, its canal was artificially flared and randomly categorized into group tFRC (tapered FRC post) ( n = 22), mFRC (multi-FRC post) ( n = 21), and DIS-FRC (direct individually shaped-FRC (DIS-FRC) post) ( n = 22), which were further subdivided based on cementation resin. The posts were cemented and a standardized resin core was constructed. After thermocycling, the samples were loaded statically and the maximum load was recorded., Results: The load capacity of the maxillary central incisor was influenced by the different FRC post system and not the resin cement ( p = 0.289), and no significant interaction was found between them. Group mFRC (522.9N) yielded a significantly higher load capacity compared to DIS-FRC (421.1N). Overall, a 55% favorable fracture pattern was observed, and this was not statistically significant., Conclusion: Within the limitation of the study, it can be concluded that prefabricated FRC posts outperform DIS-FRC posts in terms of the load capacity of a maxillary central incisor with a simulated flared root canal. The cementation methods whether a self-adhesive or self-etch resin cement, was not demonstrated to influence the load capacity of a maxillary central incisor with a flared root canal. There were no significant differences between the favorable and non-favorable fracture when FRC post systems were used to restored a maxillary central incisor with a flared root canal., Competing Interests: The authors declare that they have no competing interests., (© 2023 Beh et al.)

Presence of adequate dimensions of keratinized/attached gingiva (KT/AG) and gingival thickness (GT) is considered necessary to maintain optimal periodontal health and long-term stability of gingival margin. Gingival phenotype modification therapies to increase these two dimensions (GT and KT/AG) on the buccal aspect of teeth have been widely reported, but the literature on lingual gingival augmentation is scarce. The purpose of this paper is to report the outcomes of a case treated with an envelope flap combined with a hybrid soft tissue autograft (subepithelial connective tissue graft with an epithelial collar) for phenotype modification of gingiva lingual to mandibular incisors presenting with thin gingiva (<1 mm) and lack of AG in tooth # 31 and 42. At 12 months follow-up, a substantial gain in KT, AG and GT along with partial root coverage was achieved., Competing Interests: Competing interests: None declared., (© BMJ Publishing Group Limited 2023. No commercial re-use. See rights and permissions. Published by BMJ.)

In this position paper, the state of the art in immediate implant placement (IIP) at incisor-cuspid-premolar sites is described. The literature supports that the following prerequisites need to be simultaneously met for a predictable outcome: (1) there must be no acute infection; (2) there must be apical and palatal/lingual bone for implant anchorage; (3) the tooth must be inside the bone envelope; (4) the alveolar socket must have a favorable morphology (type I, IIa, IIb avoiding wide dehiscences); (5) there must be no midfacial recession; (6) the right implant must be selected; and (7) the surgeon needs to be experienced and skilled. A preoperative CBCT is required for IIP because multiple aforementioned prerequisites (2, 3, and 4) can only be assessed on the basis of 3D imaging. The final prerequisite relates to the importance of a perfect implant position, preferably leaving a horizontal gap of at least 2 mm between the implant shoulder and buccal bone wall. Guided surgery is preferred over free-hand surgery to accomplish this. Flapless surgery, socket grafting, connective tissue graft (CTG), and immediate provisionalization have been shown to contribute to hard and/or soft tissue stability. When the previously mentioned prerequisites are fulfilled, IIP may be considered over alternative treatment concepts (eg, early implant placement [EIP] and delayed implant placement [DIP]) based on time gain, minimal invasiveness, and similar outcomes in the literature. Given very strict selection criteria, clinicians should primarily screen patients for IIP before considering other treatment options with wider indications. Int J Prosthodont 2023;36:533-545.

BACKGROUND Replacing missing teeth in the anterior region of the jaw can be challenging due to the limited available interdental space. Improper selection or inadequate placement of a dental implant in this situation can affect the adjacent anatomical structures negatively. What if, in addition, a residual intraosseous chronic inflammatory lesion was present? The objective of this case report is to demonstrate the step-by-step surgical procedures of replacing a maxillary lateral incisor in a patient with a residual lesion with a satisfactory outcome. CASE REPORT A 63-year-old female patient with an extracted maxillary lateral incisor presented for implant placement. Radiographically, a residual periapical lesion with mild atrophy of the alveolar bone and fairly low density with sparse trabeculation was noted. Owing to the limited restorative space, a Straumann Bone Level Tapered Implant Ø2.9 mm (Small Cross-Fit connection, Roxolid, SLActive) was placed. Histopathological evaluation revealed a definitive diagnosis of periapical granuloma. After 1 year, the clinical examination revealed a successful outcome, and the patient was satisfied with the result. CONCLUSIONS This case report shows a successful clinical and radiographical outcome after 1 year of a 2-piece small diameter dental implant, the Straumann Bone Level Tapered Implant, diameter 2.9 mm, replacing a missing maxillary lateral incisor after enucleating the lesion with histopathological examination.

Maxillary central incisors are critical to occlusal function, smile esthetics, and even one's self-image. Furthermore, their impaction at an early age could have harmful psychological consequences on the individual. Maxillary central incisors can be impacted due to early dentoalveolar trauma to the upper anterior region that displaces the incisor in formation and, in rare instances, tooth germs are deformed. The aftermath of trauma during primary dentition is seen later during mixed dentition. Other causes are either an impediment in the eruption pathway of the maxillary central incisor due to the presence of odontomas or supernumerary teeth, an insufficient eruption space, or, very rarely, syndromic and/or other general medical conditions. Diagnosis is completed through a detailed medical/dental history, clinical evaluation, and appropriate imaging. Arch width increase, space opening, removal of obstructions if present, suitable soft-tissue management, well-designed orthodontic traction mechanics, and long-term periodontal follow-up are all essential elements in resolving cases of impacted maxillary central incisors.

The present case describes the successful healing of a periapical lesion associated with the left maxillary lateral incisor (# 22, Federation Dentaire Internationale) having a type 3b dens invaginatus tooth morphology. The treatment was complicated by the presence of blunderbuss root apex and large periapical lesion (>10 mm) with through and through bone defect (Bucco palatal cortical bone perforation, Von Arx Type 1b). An adolescent boy reported palatal swelling and pus discharge in relation to tooth #22. A thorough clinical and radiographic examination revealed tooth #22 as having a type 3b dens invaginatus with an open apex and a diagnosis of pulp necrosis and acute apical abscess. The case was managed by non-surgical root canal treatment followed by endodontic surgery using principles of guided tissue regeneration. A 5-year recall revealed an asymptomatic functional tooth with complete healing., Competing Interests: Competing interests: None declared., (© BMJ Publishing Group Limited 2023. No commercial re-use. See rights and permissions. Published by BMJ.)

This case report describes the orthodontic treatment of an 11-year-old patient with three maxillary impacted teeth on the right side. Cone-beam computed tomography showed that these teeth were close together, with the lateral incisor in a lower position, followed by the central incisor, and the canine in a more apical position. Treatment included applying traction to these teeth. A transpalatal arch was used as an anchorage device, and surgical exposure of the lateral incisor was performed for traction with an elastic chain toward the hook welded to the 0.017 × 0.025-inch steel segmented arch. Subsequently, the central incisor was surgically exposed, elastic chains were used, along with a 0.016-inch steel arch with a box loop for correcting the tooth position. The canine spontaneously began to erupt, and a 0.017 × 0.025-inch TMA segmented arch with boot loop was used to control rotation and torque of the canine during its distalization. Once these three teeth were in the arch, treatment was finished in the usual manner. For esthetic improvement, gingivoplasty was performed in the maxillary arch. Eighteen-month follow-up showed that orthodontic treatment allowed preservation of the natural teeth, the contour of gingival support, and avoidance of prosthetic rehabilitation, reestablishing the patient's esthetics and function, with satisfactory stability., (© 2023 by the EH Angle Education and Research Foundation, Inc.)

The aim of this study was to evaluate the radiographic characteristics and surgical removal of mesiodens among patients who had attended the Department of Dentistry, Oral and Maxillofacial-Plastic and Reconstructive Surgery of the Faculty of Medicine, Yamagata University. This study included 121 patients in the final analysis. We retrospectively reviewed medical records including patient age, sex, mesiodens number, direction, position, opportunity for detection, surgical approach and operating time. The 121 patients comprised 82 males and 39 females. Mean age was 7.6 ± 3.1 years (range, 4-35 years). The total number of mesiodens among these 121 patients was 147. Ninety-six patients had one mesiodens, 24 patients had two mesiodens and 1 patient had 3 mesiodens. Seventy-nine mesiodens were detected while taking X-rays for routine dental examination and/or orthodontic treatment at their family dental/orthodontic clinic. Mean operating time for removal of the 147 mesiodens was 32.2 ± 18.1 min. Among the 96 patients with one mesiodens, mean operating time for removal of the mesiodens was 30.7 ± 16.5 min. Operating time for removal of a mesiodens tended to be prolonged with increased distance from the alveolar crest. Early detection of mesiodens on routine radiographic check-ups and surgical planning considering patient age, crown direction, position of the mesiodens will contribute to improved treatment of mesiodens., Competing Interests: Declaration of Competing Interest We declare that the authors have no conflicts of interest., (Copyright © 2023 Elsevier Masson SAS. All rights reserved.)

BACKGROUND We conducted a finite element analysis to evaluate stress levels in incisor teeth restored with custom polyetheretherketone (PEEK) dental post-cores compared to conventional post-cores. MATERIAL AND METHODS Using micro-computed tomography (μCT) imaging data, a 3D model of a maxillary incisor was created. For each material type, 3D mesh models were developed via specialized software. Two post diameters, 2.5 mm and 3.5 mm, were considered. Five different post materials were examined: Unfilled polyetheretherketone (Group UP); Glass fiber-reinforced polyetheretherketone (Group GP); Carbon fiber-reinforced polyetheretherketone (Group CP); Metal (Group M); and Zirconia ceramic (Group Z). Each model underwent finite element analysis, after which the von Mises equivalent stress values were determined. RESULTS For models involving both wide and narrow diameter posts across the crown, crown cement, post cement, and dentin, PEEK posts (Group UP, GP, and CP) exhibited higher von Mises stress values than Groups Z and M. However, the reverse trend was noticed in the post model itself. In the post cement model, stress values appeared similar only for the narrow-diameter post groups. Notably, results for Groups Z and M were largely consistent with each other. CONCLUSIONS PEEK posts, which have a lower modulus of elasticity, demonstrated different stress values when contrasted with zirconia and metal posts. As the post diameter expanded, the residual dentin decreased, influencing the stress values among various materials. Further in vitro and clinical examinations are essential to comprehensively understand PEEK posts.

Background/aim: There is a little research on the experiences and opinions of patients who have had autotransplantation of a tooth. The aim of the study was to assess the satisfaction of patients who underwent the autotransplantation of a developing premolar to replace a traumatised maxillary central incisor., Materials and Methods: Eighty patients (with a mean age of 10.7-years) and 32 parents were surveyed with 13 and 7 questions, respectively, to determine their opinions about the surgery, post-operative period, orthodontic and restorative treatment they had received., Results: Patients and their parents were very satisfied with the outcomes of the autotransplantation treatment. The majority of patients and all parents declared that they would choose this treatment again if needed. Patients who already had aesthetic restoration of the transplanted toothscored significantly better in position, similarity to other teeth, alignment and aesthetics, when compared to patients before restoration of the premolar to the shape of incisor. Patients after orthodontic treatment considered the alignment of the transplanted tooth between the adjacent teeth as better when compared to patients before or during their orthodontic treatment., Conclusions: Autotransplantation of developing premolars to replace traumatized maxillary central incisors proved to be a well-accepted treatment option. A delay of restoration of the transplanted premolars to the shape of the maxillary incisors did not have a negative impact on the satisfaction with the treatment., (© 2023 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

An 18.7-year-old female patient with an anterior open bite and an ankylosed left maxillary central incisor was referred from a private orthodontic clinic. Canine relationships were Class II and molar relationships were Class I. The open bite was closed with the multiloop edgewise archwire and up-and-down elastics. The maxillary left central incisor was extruded by dentoalveolar distraction assisted with mini-implants. Active treatment took 2 years and 1 month, and the treatment result remained stable 14 months after debonding., (© 2023 by The EH Angle Education and Research Foundation, Inc.)

Dens invaginatus is a morphological abnormality of the tooth that results from a developmental anomaly during tooth formation, in which part of the enamel and dentin of the crown invaginates into the pulp cavity. This report describes a case of a maxillary lateral incisor with apical periodontitis apparently caused by Oehlers Type III dens invaginatus. The patient was a 69-year-old man who visited our clinic complaining of discomfort in the maxillary right lateral incisor. Cone-beam computed tomography (CBCT) revealed dens invaginatus of the maxillary lateral incisor and a sinus tract in the maxillary central incisor region, which was derived from apical periodontitis of the maxillary lateral incisor. The dens invaginatus was accompanied by a complex root canal morphology. Treatment, which was performed using a dental surgical microscope, had a favorable outcome. The patient remains in good condition at 1 year postoperatively.

Achieving favorable and stable esthetic outcomes with immediate implants used to replace maxillary anterior teeth can be challenging. Osteotomies need to be initiated along the palatal socket wall, and it is often difficult to stabilize initial drilling. An immediate implant was planned for a hopeless maxillary incisor. Using a flapless surgery technique, the tooth was removed and decoronated, and an entry point was made in the root to guide the osteotomy drills. The root was reinserted and stabilized while a precision drill and 2-mm twist drill were used in sequence to drill through the tooth root, establishing the osteotomy location but stopping 3-4 mm short of final depth. The root was then removed, and the final implant bur for a 3.5 × 11.5-mm implant was drilled to depth, engaging the necessary native bone apically. The original tooth crown was then used to prepare and insert a transitional crown. Reinserting the extracted root of a maxillary anterior tooth and using it as a guide for osteotomy preparation is an excellent method to optimally position an immediate implant palatally in the socket wall.

Background: The anatomical characteristics of the maxillary labial alveolar bone play a crucial role in the treatment planning of immediate implant placement. The sagittal root position (SRP) and alveolar bone concavity are closely related to anatomical characteristics in determining the ideal implant position. This study evaluated the SRP and labial alveolar bone concavity in the maxillary anterior teeth area., Methods: Cone-beam computed tomography images of 120 samples involving 720 teeth were uploaded to the medical imaging software. The SRP was classified as Class I, II, III, or IV, and the concavity of labial alveolar bone was measured. A T test was performed to compare measurements between the central and lateral incisors, between the central incisors and canines, and between the lateral incisors and canine., Results: The majority of the SRPs of the maxillary anterior teeth were class I (engaging the labial cortical plate) with frequencies of 98.3%, 85.8%, and 81.7% for the canines, lateral incisors, and central incisors, respectively. In terms of concavity of labial alveolar bone in maxillary tooth area, canines also had the largest mean value (139.5°), followed by lateral incisors, whereas central incisors has the smallest mean value (131.7°). The results of the T test revealed a significant difference ( p < 0.001) in labial alveolar bone concavity between central and lateral incisors, between central incisors and canines, and between lateral incisors and canines., Conclusion: Most maxillary anterior teeth were classified as Class I SRP, Class III SRP was the least prevalent, and the concavity of the labial alveolar bone significantly differed between the central and lateral incisors, between the central incisors and canines, and between the lateral incisors and canines. In addition, the canines had the highest mean alveolar bone concavity angle, indicating that less concavity in the canines area., Competing Interests: Conflicts of interest: The authors declare that they have no conflicts of interest related to the subject matter or materials discussed in this article., (Copyright © 2023, the Chinese Medical Association.)

Background: The aim of this study was to evaluate clinical and patient-reported outcomes following surgical root coverage at RT1 gingival recession defects at mandibular incisors, using either a conventional free gingival graft (FGG) or a modified FGG (ModFGG)., Methods: Total of 30 patients with RT1 gingival recessions at mandibular incisors were enrolled and randomly allocated to either a control (FGG) or test group (ModFGG). Evaluations of clinical changes (recession depth, height of keratinized tissue) and patient satisfaction were performed over a follow-up period of 12 months. Post-surgical changes of keratinized tissue height (shrinkage) were assessed from 1 month and onward., Results: ModFGG resulted in more pronounced root coverage at 1 year compared to FGG (91.8% vs. 60.7%, p < 0.001). Height of keratinized tissue was improved by 4.2 and 2.2 mm (p < 0.001), respectively, with significantly less shrinkage in ModFGG. Post-surgical morbidity was significantly lower for ModFGG at 2 weeks and patient satisfaction was significantly higher 12 months after treatment (9.1 vs. 5.4; p < 0.001)., Conclusions: ModFGG represents a valid approach for the management of RT1 recession defects at mandibular incisors. The technique is superior to traditional FGG in terms of root coverage, the gain of keratinized tissue height, and patient satisfaction., (© 2023 The Authors. Journal of Periodontology published by Wiley Periodicals LLC on behalf of American Academy of Periodontology.)

Introduction: A failure of maxillary incisor eruption is commonly attributed to the presence of a supernumerary tooth. This systematic review aimed to assess the percentage of impacted maxillary incisors that successfully erupt after surgical removal of supernumerary teeth with or without other interventions., Methods: Systematic literature searches without restrictions were undertaken in 8 databases for studies reporting any intervention aimed at facilitating incisor eruption, including surgical removal of the supernumerary alone or in conjunction with additional interventions published up to September 2022. After duplicate study selection, data extraction, and risk of bias assessment according to the risk of bias in nonrandomized studies of interventions and Newcastle-Ottawa scale, random-effects meta-analyses of aggregate data were conducted., Results: Fifteen studies (14 retrospective and 1 prospective) were included with 1058 participants (68.9% male; mean age, 9.1 years). The pooled eruption prevalence for removal of the supernumerary tooth with space creation or removal of the supernumerary tooth with orthodontic traction was significantly higher at 82.4% (95% confidence interval [CI], 65.5-93.2) and 96.9% (95% CI, 83.8-99.9) respectively, compared with removal of an associated supernumerary only (57.6%; 95% CI, 47.8-67.0). The odds of successful eruption of an impacted maxillary incisor after removal of a supernumerary were more favorable if the obstruction was removed in the deciduous dentition (odds ratio [OR], 0.42; 95% CI, 0.20-0.90; P = 0.02); if the supernumeraries were conical (OR, 2.91; 95% CI, 1.98-4.28; P <0.001); if the incisor was in the correct position (OR, 2.19; 95% CI, 1.14-4.20; P = 0.02), at the level of the gingival third (OR 0.07; 95% CI, <0.01-0.97; P = 0.04) and had incomplete root formation (OR, 9.02; 95% CI, 2.04-39.78; P = 0.004). Delaying removal of the supernumerary tooth 12 months after the expected eruption time of the maxillary incisor (OR, 0.33; 95% CI, 0.10-1.03; P = 0.05) and waiting >6 months for spontaneous eruption after removal of the obstacle (OR, 0.13; 95% CI, 0.03-0.50; P = 0.003) was associated with worse odds for eruption., Conclusions: Limited evidence indicated that the adjunctive use of orthodontic measures and removal of supernumerary teeth might be associated with greater odds of successfull impacted incisor eruption than removal of the supernumerary tooth alone. Certain characteristics related to supernumerary type and the position or developmental stage of the incisor may also influence successful eruption after removal of the supernumerary. However, these findings should be viewed with caution as our certainty is very low to low because of bias and heterogeneity. Further well-conducted and reported studies are required. The results of this systematic review have been used to inform and justify the iMAC Trial., (Crown Copyright © 2023. Published by Elsevier Inc. All rights reserved.)

Understanding the quality of the ridge and facial cortical bone in the aesthetic zone is important for treatment with an immediate dental implant. This study aimed to analyze bone density and widths of the facial cortical bone and alveolar ridge at the central incisors in relation to arch form. A total of 400 teeth from 100 cone-beam CT images were divided equally between the upper and lower central incisors. The central incisor area was assessed for the width of the facial cortical and alveolar bones at three different points (3 mm, 6 mm, and 9 mm from the cementoenamel junction). Arch forms and densities of cortical and cancellous bones in the interradicular regions were evaluated. The difference in facial cortical bone thickness at 3 points was smaller for the upper teeth than for the lower teeth on both sides. The alveolar bone width was higher in the maxilla than the mandible with highly significant differences ( P < 0.001). The highest bone density was at the buccal aspect of the mandible (897.36 ± 136.72 HU), while the lowest density was at the cancellous bone of the maxilla (600.37 ± 126.63 HU). The dominant arch form was ovoid 71%, followed by square 20% and the tapering arch form 10%. The tapering arch form has the highest alveolar bone width in the upper jaw without statistical significance. The facial cortical bone thickness needs to be evaluated before implantation in the anterior region because it is less than two millimeters in both jaws. CBCT is important for the immediate implant. The ovoid shape was the dominant arch form., Competing Interests: The authors have no conflicts of interest., (Copyright © 2023 Nuhad A. Hassan and Afya Sahib Diab Al-radha.)

Dental dilacerations are abrupt deviations of the longitudinal axis of the crown or root portion of the tooth, caused by traumatic axial displacement of previously formed hard tissue in relation to the developing soft tissue., Case Presentation: A 13-year-old boy in good general health was referred for root canal treatment of the maxillary left central incisor, for which abnormal crown morphology impeded orthodontic treatment. He presented bilateral crown dilaceration at both maxillary central incisors. Treatment involved a CAD/CAM milled veneer of the maxillary left central incisor and semidirect warm composite veneer of the maxillary right central incisor. Follow-up and monitoring of the restoration was performed through .stl file analysis., Discussion: Crown dilaceration severity assessment is crucial for deciding the best treatment plan for each case. In this patient, additive restorative protocols, CBCT, and 3D digital model analysis were the most useful aids by providing key multidisciplinary information., Conclusion: A multidisciplinary treatment workflow with a minimally invasive approach aided by digital tools such as CBCT and CAD/CAM technologies is useful to achieve successful and predictable outcomes in crown dilaceration cases.

This case report aims to describe a modified surgically assisted rapid palatal expansion technique to treat an asymmetrical posterior crossbite with no mandibular shift without causing an interincisal diastema. A clinical patient with an asymmetrical crossbite, large tooth-size-arch length, and Bolton discrepancy is used to illustrate the modified technique. Instead of traditional osteotomies, in this technique, the osteotomy is done between the maxillary right canine and lateral incisor (connecting the piriform aperture to the alveolar process) along with a unilateral LeFort I osteotomy. The expansion forces are produced by the activation of a conventional hyrax appliance. The skeletal unilateral crossbite was corrected without major changes to the opposite side and without causing an anesthetic diastema between the maxillary central incisors. A mandibular incisor extraction produced the space needed to treat the tooth size-arch length and corrected the Bolton discrepancy. This allowed a successful treatment of the problems initially presented by the patient., (Copyright © 2022 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Among the complications of orthodontic treatment, mucogingival problems with gingival recession in the mandibular anterior teeth are challenging for clinicians. Mucogingival problems can lead to esthetic deficits, thermal hypersensitivity, tooth brushing pain, and complicated plaque control. Herein, we present a case of a 16-year-old female with gingival recession in the left mandibular central incisor after orthodontic treatment. The preoperative clinical findings showed a thin soft tissue biotype with root prominence in the mandibular anterior area. The interdental area was relatively depressed. After reflection of the full-thickness flap, root coverage using a bone graft substitute and subepithelial connective tissue graft obtained from the palatal mucosa was performed. The 6-month and 5-year postoperative clinical findings showed improved soft tissue phenotype. The cross-sectional CBCT scans 5 years after surgery showed a well-maintained labial bone plate in the mandibular incisors. Within the limitations of this case report, for patients with gingival recession in the mandibular incisors after orthodontic treatment, a successful biotype modification can be achieved with a combined procedure using subepithelial connective tissue graft with bone graft substitutes.

Background: Several surgical approaches have been described for the management of deep adjacent gingival recessions (GRs) in the lower anterior sextant with contrasting clinical outcomes. A modified surgical technique is presented, which consists of a double laterally moved and coronally advanced flaps in combination with a connective tissue graft (CTG) and enamel matrix derivatives (EMDs)., Methods and Results: A 42-year-old systemically healthy female presented with dentin hypersensitivity and discomfort while brushing on two adjacent Cairo recession Type 2 of 7-mm depth with a narrow band of keratinized tissue in the lower incisors. The root coverage procedure was performed using a double laterally rotated and coronally advanced flap combined with a CTG harvested from the lateral palate and EMD. At 1-year follow-up, 85% of both of the roots were covered and 6 mm of keratinized tissue width was gained., Conclusion: The presented technique is a predictable procedure for treating adjacent and deep GRs in the anterior sextant whenever keratinized tissue lateral to the gingival defects is available., Key Points: Why is this case new information? To the best of our knowledge, this is the first case report in the literature using a double laterally moved and coronally advanced flap combined with EMD and CTG for adjacent deep recessions. What are the keys to successful management of this case? Flap design, handling of the bilateral pedicles, and suture technique are the most important factors to obtain a predictable root coverage. What are the primary limitations to success in this case? Lack of keratinized tissue lateral to the recession defects, flap tension, and interproximal attachment loss are the main limitations to succeed with this technique., (© 2022 The Authors. Clinical Advances in Periodontics published by Wiley Periodicals LLC on behalf of American Academy of Periodontology.)

After performing a tunneling mucogingival surgery procedure to cover generalized root recession in the anterior maxilla, a socket shield procedure was performed for immediate implant placement on a lateral incisor, leaving a root fragment coronal to the buccal bone margin with a long soft tissue attachment. This case report suggests that it is possible to achieve stable peri-implant results 30 months after the described therapy. Int J Periodontics Restorative Dent 2023;43:175-180. doi: 10.11607/prd.6238.

This case report describes the successful 10-years interdisciplinary treatment of ankylosed upper central incisors with an anterior vertical ridge defect. This treatment was challenging as ankylosis was present before the growth spurt. Orthodontic treatment in association with decoronation, a xenogeneic bone graft, an autogenous sub-epithelial connective tissue graft, and implant placement were performed to correct the vertical ridge defect and to re-establish appropriate function, gingival health, and aesthetics. Decoronation performed during the growth spurt was the key to avoiding alveolar ridge deformity., (© 2022 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

A palatogingival groove of the maxillary lateral incisor is an anatomic malformation, which always predisposes the tooth to pulpal and periodontal disease. The diagnosis and treatment planning become complicated, with uncertain prognosis. Herein, we present an effective interdisciplinary management of a case of combined periodontal-endodontic lesions caused by palatogingival grooves. A series of treatment modalities were undertaken to preserve the two teeth, including root canal treatment, periodontal initial therapy, splinting the mobile teeth, occlusal adjustment, apical microsurgery, grinding and sealing grooves, and guided tissue regeneration. An apparent healing of the lesions was visible after 12 months. Therefore, interdisciplinary management of combined periodontal-endodontic lesions with palatogingival grooves of the maxillary lateral incisors is necessary for a favourable long-term outcome., (© 2023. The Author(s), under exclusive licence to the British Dental Association.)

Background: Calcifying odontogenic cyst (COC) can be misdiagnosed as a lesion of endodontic origin when it is in close proximity to the periradicular tissue, and pulp sensibility tests are indispensable for differential diagnosis. However, when the adjacent teeth are necrotic or already endodontically treated, diagnosis becomes challenging., Case Description: In this case report, a maxillary canine with an inadequate root canal treatment was considered as the source of an endodontic infection. Eight months after the retreatment, the patient sought treatment for a buccal intraoral swelling and a deep periodontal pocket and was referred for cone-beam computed tomography with a provisional diagnosis of a vertical root fracture. The tomography revealed an extensive lesion buccally to the roots of the canine and the adjacent vital lateral incisor. An unusual extended external resorption of the root of the vital lateral incisor was also evident. This finding shifted the diagnostic thinking toward a lesion of nonendodontic origin. The lesion was surgically enucleated, and the histopathologic examination confirmed the diagnosis of a COC., Practical Implications: Clinicians always must bear in mind the chance of a nonendodontic lesion masquerading as a lesion of endodontic origin. Cone-beam computed tomography should be considered in cases of doubt or in lesions refractory to endodontic treatment, as it can provide information on the clinicopathologic features of the lesion., (Copyright © 2023 American Dental Association. Published by Elsevier Inc. All rights reserved.)

Horizontal maxillary incisor impaction is not common, but it affects facial esthetics, phonetics, and the patient's self-esteem. Therefore, it is necessary to manage this problem as early as possible. This case report presents a patient with an unerupted maxillary left central incisor combined with anterior and left posterior crossbite, edge-to-edge overbite on the right and left anterior open bite, low smile line, and mild skeletal Class III discrepancy. The treatment consisted of 3 stages: (1) maxillary expansion and sufficient space creation for the impacted tooth; (2) surgical exposure by closed-eruption technique; and (3) induced eruption of impaction. The treatment outcome was highly favorable. Maxillary impaction erupted in the proper position with a normal clinical crown height and consonant gingival line with the adjacent teeth. Maxillary and mandibular teeth had normal and stable occlusion. The 3-year follow-up demonstrated an esthetically functional outcome after orthodontically induced tooth eruption. This treatment required a good treatment plan by the orthodontist to obtain satisfactory results., (Copyright © 2022 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: This study aimed to investigate the effect of root dilaceration on the closed-eruption technique treatment and prognosis on impacted immature maxillary central incisors., Methods: In this retrospective study, we compared the age at the beginning of the treatment, the treatment duration, root development, and alveolar bone mass after the closed-eruption technique between the impacted immature maxillary central incisors with dilacerated roots (group 1) and those with straight roots (group 2)., Results: The mean age at the time of the surgery of group 1 was 0.9 years younger than that of group 2 (P = 0.008). The mean traction time was greater in group 1 (8.0 ± 1.8 months), with a difference of 1.4 months than in group 2 (6.6 ± 2.1 months) (P = 0.042). The measurements of lingual bone thickness at the alveolar crest (C) showed significant differences between the 2 groups (P = 0.025). No significant differences were found in other treatment duration or measurements of root development and alveolar bone mass between the 2 groups., Conclusions: Patients with impacted immature incisors with dilacerated roots were younger at the beginning of the closed-eruption treatment and had a longer traction time than those with impacted immature incisors having straight roots. The root dilaceration had little or no effect on root development and alveolar bone mass after the closed-eruption treatment. The closed-eruption treatment of impacted immature incisors with root dilaceration is suggested to commence as early as possible., (Copyright © 2022 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Introduction: The use of fixed retainers at the end of a course of orthodontic treatment has become standard practice. The main complication that can occur with fixed retainers is the detachment of the wire from one or more teeth. A less common complication is unwanted tooth movement., Method: This article presents a patient with extreme tooth movement associated with a mandibular fixed retainer. Ten years after orthodontic treatment, a 26-year-old male sought treatment for post-orthodontic movement of the mandibular anterior six teeth. Despite the fixed retainer still being attached to all teeth, the apex of the right canine was completed avulsed labially. Severe labial recession was also present on the left lateral incisor. The canine was extracted, and the fixed retainer was removed. Significant root resorption identified on a panoramic radiograph contraindicated any further extensive orthodontic intervention., Discussion: This case highlights that clinicians and patients should be aware of this rare but serious complication.