Search

In this paper, we study the property of bigness of the tangent bundle of a smooth projective rational surface with nef anticanonical divisor. We first show that the tangent bundle $T_S$ of $S$ is not big if $S$ is a rational elliptic surface. We then study the property of bigness of the tangent bundle $T_S$ of a weak del Pezzo surface $S$. When the degree of $S$ is $4$, we completely determine the bigness of the tangent bundle through the configuration of $(-2)$-curves. When the degree $d$ of $S$ is less than or equal to $3$, we get a partial answer. In particular, we show that $T_S$ is not big when the number of $(-2)$-curves is less than or equal to $7-d$, and $T_S$ is big when $d=3$ and $S$ has the maximum number of $(-2)$-curves. The main ingredient of the proof is to produce irreducible effective divisors on $\mathbb{P}(T_S)$, using Serrano's work on the relative tangent bundle when $S$ has a fibration, or the total dual VMRT associated to a conic fibration on $S$., Comment: 20 pages, 14 figures

Freight truck electrification for last-mile delivery is one of the most important research topics to reduce the dependency on fossil fuel operations. Although a battery electric truck still has limitations on daily operations with lower driving ranges and higher purchasing cost than a conventional truck, operations with electrified trucks reduce total energy usage and driving noise on routes. In this paper, we propose a fleet-mix and multi-shift electric vehicle routing problem for joint implementation of fleet electrification and off-hour delivery in urban e-commerce delivery systems. Every electrified truck is assumed to have two shifts for both daytime and nighttime delivery operations while conventional trucks can operate during daytime only because of municipal restrictions on nighttime deliveries, which are related to engine noise. Also, every electrified truck must recharge between shifts at its depot. A fleet owner decides the best electrification ratio of the fleet and the proper number of chargers which gives the minimum total cost. The optimization problem is described as a mixed-integer linear programming model including common constraints for vehicle routing problem, recharging constraints, and two-shift operation of electrified trucks. A bi-level VNS-TS heuristic is also suggested for efficient solution search. The upper-level problem assigns trucks with engine type and brief route information using variable neighborhood search heuristic, and the lower-level problem finds the best route of each assigned truck using a tabu search heuristic. Scenarios with different EV driving ranges and nighttime operation availabilities are developed and evaluated with the POLARIS transportation simulation framework, and results are reported.

Score distillation sampling (SDS), the methodology in which the score from pretrained 2D diffusion models is distilled into 3D representation, has recently brought significant advancements in text-to-3D generation task. However, this approach is still confronted with critical geometric inconsistency problems such as the Janus problem. Starting from a hypothesis that such inconsistency problems may be induced by multiview inconsistencies between 2D scores predicted from various viewpoints, we introduce GSD, a simple and general plug-and-play framework for incorporating 3D consistency and therefore geometry awareness into the SDS process. Our methodology is composed of three components: 3D consistent noising, designed to produce 3D consistent noise maps that perfectly follow the standard Gaussian distribution, geometry-based gradient warping for identifying correspondences between predicted gradients of different viewpoints, and novel gradient consistency loss to optimize the scene geometry toward producing more consistent gradients. We demonstrate that our method significantly improves performance, successfully addressing the geometric inconsistency problems in text-to-3D generation task with minimal computation cost and being compatible with existing score distillation-based models. Our project page is available at https://ku-cvlab.github.io/GSD/.

Person re-identification (Re-ID) often faces challenges due to variations in human poses and camera viewpoints, which significantly affect the appearance of individuals across images. Existing datasets frequently lack diversity and scalability in these aspects, hindering the generalization of Re-ID models to new camera systems. We propose Pose-dIVE, a novel data augmentation approach that incorporates sparse and underrepresented human pose and camera viewpoint examples into the training data, addressing the limited diversity in the original training data distribution. Our objective is to augment the training dataset to enable existing Re-ID models to learn features unbiased by human pose and camera viewpoint variations. To achieve this, we leverage the knowledge of pre-trained large-scale diffusion models. By conditioning the diffusion model on both the human pose and camera viewpoint concurrently through the SMPL model, we generate training data with diverse human poses and camera viewpoints. Experimental results demonstrate the effectiveness of our method in addressing human pose bias and enhancing the generalizability of Re-ID models compared to other data augmentation-based Re-ID approaches.

In the quest for novel quantum states driven by topology and correlation, kagome lattice materials have garnered significant interest due to their distinctive electronic band structures, featuring flat bands (FBs) arising from the quantum destructive interference of the electronic wave function. The tuning of the FBs to the chemical potential would lead to the possibility of liberating electronic instabilities that lead to emergent electronic orders. Despite extensive studies, direct evidence of FBs tuned to the chemical potential and their participation in emergent electronic orders have been lacking in bulk quantum materials. Here using a combination of Angle-Resolved Photoemission Spectroscopy (ARPES) and Density Functional Theory (DFT), we reveal that the low-energy electronic structure of the recently discovered Cr-based kagome metal superconductor CsCr3Sb5 is dominated by a pervasive FB in close proximity to, and below the Fermi level. A comparative analysis with orbital-projected DFT and polarization dependence measurement uncovers that an orbital-selective renormalization mechanism is needed to reconcile the discrepancy with the DFT calculations, which predict the FB to appear 200 meV above the Fermi level. Furthermore, we observe the FB to shift away from the Fermi level by 20 meV in the low-temperature density wave-ordered phase, highlighting the role of the FB in the emergent electronic order. Our results reveal CsCr3Sb5 to stand out as a promising platform for further exploration into the effects of FBs near the Fermi level on kagome lattices, and their role in emergent orders in bulk quantum materials.

The discovery of the charge density wave order (CDW) within a magnetically ordered phase in the kagome lattice FeGe has provided a promising platform to investigate intertwined degrees of freedom in kagome lattices. Recently, a method based on post-annealing has been suggested to manipulate the CDW order in kagome FeGe towards either long-range or suppressed orders. Here, we provide a comprehensive comparison of the experimentally measured electronic structures of FeGe crystals that have undergone different post-annealing procedures and demonstrate the remarkable effectiveness on tuning the CDW gap without strong perturbation on the underlying electronic structure. Moreover, we observe an additional low temperature transition that only appears in crystals with a long-range CDW order, which we associate with a lattice-spin coupled order. Our work indicates a likely strong sensitivity of the CDW order to disorder in FeGe, and provides evidence for strong coupling between the electronic, lattice, and spin degrees of freedom in this kagome magnet.

Growth parameters play a significant role in the crystal quality and physical properties of layered materials. Here we present a case study on a van der Waals magnetic NbFeTe2 material. Two different types of polymorphic NbFeTe2 phases, synthesized at different temperatures, display significantly different behaviors in crystal symmetry, electronic structure, electrical transport, and magnetism. While the phase synthesized at low temperature showing behavior consistent with previous reports, the new phase synthesized at high temperature, has completely different physical properties, such as metallic resistivity, long-range ferromagnetic order, anomalous Hall effect, negative magnetoresistance, and distinct electronic structures. Neutron diffraction reveals out-of-plane ferromagnetism below 70K, consistent with the electrical transport and magnetic susceptibility studies. Our work suggests that simply tuning synthetic parameters in a controlled manner could be an effective route to alter the physical properties of existing materials potentially unlocking new states of matter, or even discovering new materials., Comment: 22 Pages, 6 figures

The two-dimensional (2D) material Cr$_2$Ge$_2$Te$_6$ is a member of the class of insulating van der Waals magnets. Here, using high resolution angle-resolved photoemission spectroscopy in a detailed temperature dependence study, we identify a clear response of the electronic structure to a dimensional crossover in the form of two distinct temperature scales marking onsets of modifications in the electronic structure. Specifically, we observe Te $p$-orbital-dominated bands to undergo changes at the Curie transition temperature T$_C$ while the Cr $d$-orbital-dominated bands begin evolving at a higher temperature scale. Combined with neutron scattering, density functional theory calculations, and Monte Carlo simulations, we find that the electronic system can be consistently understood to respond sequentially to the distinct temperatures at which in-plane and out-of-plane spin correlations exceed a characteristic length scale. Our findings reveal the sensitivity of the orbital-selective electronic structure for probing the dynamical evolution of local moment correlations in vdW insulating magnets., Comment: PRB, in press

Recently, neural radiance field (NeRF) has shown remarkable performance in novel view synthesis and 3D reconstruction. However, it still requires abundant high-quality images, limiting its applicability in real-world scenarios. To overcome this limitation, recent works have focused on training NeRF only with sparse viewpoints by giving additional regularizations, often called few-shot NeRF. We observe that due to the under-constrained nature of the task, solely using additional regularization is not enough to prevent the model from overfitting to sparse viewpoints. In this paper, we propose a novel framework, dubbed Self-Evolving Neural Radiance Fields (SE-NeRF), that applies a self-training framework to NeRF to address these problems. We formulate few-shot NeRF into a teacher-student framework to guide the network to learn a more robust representation of the scene by training the student with additional pseudo labels generated from the teacher. By distilling ray-level pseudo labels using distinct distillation schemes for reliable and unreliable rays obtained with our novel reliability estimation method, we enable NeRF to learn a more accurate and robust geometry of the 3D scene. We show and evaluate that applying our self-training framework to existing models improves the quality of the rendered images and achieves state-of-the-art performance in multiple settings., Comment: 34 pages, 21 figures Our project page can be found at : https://ku-cvlab.github.io/SE-NeRF/

This paper proposes a thermal-infrared (TIR) remote target detection system for maritime rescue using deep learning and data augmentation. We established a self-collected TIR dataset consisting of multiple scenes imitating human rescue situations using a TIR camera (FLIR). Additionally, to address dataset scarcity and improve model robustness, a synthetic dataset from a 3D game (ARMA3) to augment the data is further collected. However, a significant domain gap exists between synthetic TIR and real TIR images. Hence, a proper domain adaptation algorithm is essential to overcome the gap. Therefore, we suggest a domain adaptation algorithm in a target-background separated manner from 3D game-to-real, based on a generative model, to address this issue. Furthermore, a segmentation network with fixed-weight kernels at the head is proposed to improve the signal-to-noise ratio (SNR) and provide weak attention, as remote TIR targets inherently suffer from unclear boundaries. Experiment results reveal that the network trained on augmented data consisting of translated synthetic and real TIR data outperforms that trained on only real TIR data by a large margin. Furthermore, the proposed segmentation model surpasses the performance of state-of-the-art segmentation methods., Comment: 12 pages

Soaring demands of multi-stacked memory devices request urgent development of backside contact electrode technologies, such as high aspect ratio etching, metallization, and inspection methods. Especially the complex metal contact process should be monitored for each manufacturing step to filter the defective samples and to maintain the high yield of production. Among the inspection methods for detecting the electrical connections, there is voltage contrast (VC)-SEM and conducting AFM (C-AFM). In this report, we investigated the two inspection methods for testing designed samples with different contact hole states. The VC-SEM data shows the contrast variation at the contact holes, from which one may discern the contact status with an optimum voltage. The C-AFM results clearly demonstrate a finite electrical current in the connected contact, while a negligible current in the disconnected one. Finally, we discuss insights of using the two methods for analyzing the contact hole technologies with high aspect ratios., Comment: 17 pages, 4 figures