Search

Macrophages are widely recognized in modulating the foreign body response, and the manner in which they do so largely depends on their activation state, often referred to as their polarization. This preliminary study demonstrates that surface immobilized α-1 acid glycoprotein (AGP), as well as collagen VI (Col6) in conjunction with AGP, can direct macrophages towards the M2 polarization state in vitro and modify the foreign body response in vivo. AGP and Col6 are immobilized onto poly(2-hydroxyethyl methacrylate) (pHEMA) surfaces using carbonyl diimidazole chemistry. Mouse bone marrow derived macrophages are cultured on modified surfaces with or without lipopolysaccharide stimulation. Surface modified pHEMA discs are implanted subcutaneously into mice to observe differences in the foreign body response. After stimulation with lipopolysaccharide, macrophages cultured on AGP or Col6 modified surfaces showed a reduction in TNF-α expression compared to controls. Arg1 expression was also increased in macrophages cultured on modified surfaces. Explanted tissues showed that the foreign body capsule around implants with AGP or AGP and Col6 modification had reduced thickness, while also being more highly vascularized. These data demonstrate that α-1 acid glycoprotein and collagen VI could potentially be used for the surface modification of medical devices to influence macrophage polarization leading to a reduced and modulated foreign body response., (© 2023 Wiley Periodicals LLC.)

Rapid and safe hemostasis is crucial for the survival of bleeding patients in prehospital care. It is urgent to develop high performance hemostatic material to control the massive hemorrhage in the military field and accidental trauma. In this work, an efficient protein hemostat of thrombin was immobilized onto commercial gauze, which was mediated by self-polymerization and anchoring of tannic acid (TA). Through TA treatment, the efficient immobilization of thrombin was achieved, preserving both the biological activity of thrombin and the physical properties of the dressing, including absorbency, breathability, and mechanical performance. Moreover, in the presence of TA coating and thrombin, Gau@TA/Thr could obviously shortened clotting time and enriched blood components such as plasma proteins, platelets, and red blood cells, thereby exhibiting an enhanced in vitro coagulation effect. In SD rat liver volume defect and artery transection hemorrhage models, Gau@TA/Thr still had outstanding hemostatic performance. Besides, the Gau@TA/Thr gauze had inherent antibacterial property and demonstrated excellent biocompatibility. All results suggested that Gau@TA/Thr would be a potential candidate for treating uncontrollable hemorrhage in prehospital care., (© 2024. The Author(s).)

Dealing with bone defects is a significant challenge to global health. Electrospinning in bone tissue engineering has emerged as a solution to this problem. In this study, we designed a PVDF-b-PTFE block copolymer by incorporating TFE, which induced a phase shift in PVDF from α to β , thereby enhancing the piezoelectric effect. Utilizing the electrospinning process, we not only converted the material into a film with a significant surface area and high porosity but also intensified the piezoelectric effect. Then we used polydopamine to immobilize BMP-2 onto PVDF-b-PTFE electrospun nanofibrous membranes, achieving a controlled release of BMP-2. The scaffold's characters were examined using SEM and XRD. To assess its osteogenic effects in vitro , we monitored the proliferation of MC3T3-E1 cells on the fibers, conducted ARS staining, and measured the expression of osteogenic genes. In vivo , bone regeneration effects were analyzed through micro-CT scanning and HE staining. ELISA assays confirmed that the sustained release of BMP-2 can be maintained for at least 28 d. SEM images and CCK-8 results demonstrated enhanced cell viability and improved adhesion in the experimental group. Furthermore, the experimental group exhibited more calcium nodules and higher expression levels of osteogenic genes, including COL-I, OCN, and RUNX2. HE staining and micro-CT scans revealed enhanced bone tissue regeneration in the defective area of the PDB group. Through extensive experimentation, we evaluated the scaffold's effectiveness in augmenting osteoblast proliferation and differentiation. This study emphasized the potential of piezoelectric PVDF-b-PTFE nanofibrous membranes with controlled BMP-2 release as a promising approach for bone tissue engineering, providing a viable solution for addressing bone defects., (© 2024 IOP Publishing Ltd.)

Endovascular stenting is a safer alternative to open surgery for use in treating cerebral arterial stenosis and significantly reduces the recurrence of ischemic stroke, but the widely used bare-metal stents (BMSs) often result in in-stent restenosis (ISR). Although evidence suggests that drug-eluting stents are superior to BMSs in the short term, their long-term performances remain unknown. Herein, we propose a potential vascular stent modified by immobilizing clickable chemerin 15 (C15) peptides on the stent surface to suppress coagulation and restenosis. Various characterization techniques and an animal model were used to evaluate the surface properties of the modified stents and their effects on endothelial injury, platelet adhesion, and inflammation. The C15-immobilized stent could prevent restenosis by minimizing endothelial injury, promoting physiological healing, restraining the platelet-leukocyte-related inflammatory response, and inhibiting vascular smooth muscle cell proliferation and migration. Furthermore, in vivo studies demonstrated that the C15-immobilized stent mitigated inflammation, suppressed neointimal hyperplasia, and accelerated endothelial restoration. The use of surface-modified, anti-inflammatory, endothelium-friendly stents may be of benefit to patients with arterial stenosis. STATEMENT OF SIGNIFICANCE: Endovascular stenting is increasingly used for cerebral arterial stenosis treatment, aiming to prevent and treat ischemic stroke. But an important accompanying complication is in-stent restenosis (ISR). Persistent inflammation has been established as a hallmark of ISR and anti-inflammation strategies in stent modification proved effective. Chemerin 15, an inflammatory resolution mediator with 15-aa peptide, was active at picomolar through cell surface receptor, no need to permeate cell membrane and involved in resolution of inflammation by inhibiting inflammatory cells adhesion, modulating macrophage polarization into protective phenotype, and reducing inflammatory factors release. The implications of this study are that C15 immobilized stent favors inflammation resolution and rapid re-endothelialization, and exhibits an inhibitory role of restenosis. As such, it helps the decreased incidence of ISR., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Actinomycin is a family of chromogenic lactone peptides that differ in their peptide portions of the molecule. An antimicrobial peptide, actinomycin X2 (Ac.X2), was produced through the fermentation of a Streptomyces cyaneofuscatus strain. Immobilization of Ac.X2 onto a prepared silk fibroin (SF) film was done through a carbodiimide reaction. The physical properties of immobilized Ac.X2 (antimicrobial films, AMFs) were analyzed by ATR-FTIR, SEM, AFM, and WCA. The findings from an in vitro study showed that AMFs had a more broad-spectrum antibacterial activity against both S. aureus and E. coli compared with free Ac.X2, which showed no apparent strong effect against E. coli. These AMFs showed a suitable degradation rate, good hemocompatibility, and reduced cytotoxicity in the biocompatibility assay. The results of in vivo bacterially infected wound healing experiments indicated that wound inflammation was prevented by AMFs, which promoted wound repair and improved the wound microenvironment. This study revealed that Ac.X2 transformation is a potential candidate for skin wound healing.

Infections caused by viruses are difficult to treat due to their life cycle, which depends on the replication machinery of the respective host cells. Commonly used antiviral strategies are based upon the application of, e.g., entry inhibitors and other compounds that interfere with virus replication. Besides possible side effects, the rapid occurrence of viral resistance poses a great challenge. Antimicrobial peptides (AMPs), as a component of the innate immunity, are able to kill bacteria and fungi and, in addition, may inactivate enveloped viruses. Many AMPs exert their biological function by impairing microbial and viral membranes. As a result, membrane integrity is lost, leading to bacterial killing and virus inactivation. Covalently immobilized AMPs have been shown to be biocidal too, which is of special interest when the presence of a soluble agent is to be avoided. Here, we demonstrate the conjugation of the human AMP LL37 to a solid support consisting of cellulose beads and its capability to inactivate murine cytomegalovirus as an example. Virus inactivation was highly reduced by several orders of magnitude when an appropriate coupling strategy was chosen. Coupling the AMP via a long and hydrophilic polyethylene glycol spacer proved to perform less effective compared to LL37 immobilization using a short cross-linker. In addition, it was found that LL37-conjugated beads did not induce hemolysis, a prerequisite for the development of blood contacting applications. Our findings may serve as a basis for the development of an implementable device that is able to reduce the viral load under real-life conditions.

The design of new strategies to increase the effectiveness of the antibacterial treatments is a main goal in public health. So, the aim of the study was to achieve a local antibacterial directed therapy as novel alternative allowing both, the delivery of the drug at the target, while minimizing undesirable side effects, thus anticipating an enhanced effectiveness. Hence, we have developed an innovative nanoformulation composed by biomimetic magnetic nanoparticles functionalized with the antimicrobial peptide AS-48 and its potential against Gram-positive and Gram-negative bacteria, either by itself or combined with magnetic hyperthermia has been investigated. Besides, the physical properties, binding efficiency, stability and mechanism of action of this nanoassembly are analyzed. Remarkably, the nanoassembly has a strong bactericidal effect on Gram-positive bacteria, but surprisingly also on E. coli and, finally, when combined with magnetic hyperthermia, on P. aeruginosa and K. pneumoniae. The results obtained represent a breakthrough since it allows a local treatment of infections, reducing and concentrating the dose of antimicrobial compounds, avoiding secondary effects, including the resistance generation and particularly because the combination with magnetic hyperthermia helps sensitizing resistant bacteria to the bactericidal effect of AS-48. Thus, this new formulation should be considered a promising tool in the antibacterial fight., (Copyright © 2021. Published by Elsevier B.V.)

Despite technological advancement, nosocomial infections are prevalent due to the rise of antibiotic resistance. A combinatorial approach with multimechanistic antibacterial activity is desired for an effective antibacterial medical device surface strategy. In this study, an antimicrobial peptide, nisin, is immobilized onto biomimetic nitric oxide (NO)-releasing medical-grade silicone rubber (SR) via mussel-inspired polydopamine (PDA) as a bonding agent to reduce the risk of infection. Immobilization of nisin on NO-releasing SR (SR-SNAP-Nisin) and the surface characteristics were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy and contact angle measurements. The NO release profile (7 days) and diffusion of SNAP from SR-SNAP-Nisin were quantified using chemiluminescence-based nitric oxide analyzers and UV-vis spectroscopy, respectively. Nisin quantification showed a greater affinity of nisin immobilization toward SNAP-doped SR. Matrix-assisted laser desorption/ionization mass spectrometry analysis on surface nisin leaching for 120 h under physiological conditions demonstrated the stability of nisin immobilization on PDA coatings. SR-SNAP-Nisin shows versatile in vitro anti-infection efficacy against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus in the planktonic and adhered states. Furthermore, the combination of NO and nisin has a superior ability to impair biofilm formation on polymer surfaces. SR-SNAP-Nisin leachates did not elicit cytotoxicity toward mouse fibroblast cells and human umbilical vein endothelial cells, indicating the biocompatibility of the material in vitro . The preventative and therapeutic potential of SR-SNAP-Nisin dictated by two bioactive agents may offer a promising antibacterial surface strategy.

Inspired by the natural electrostatic interaction of cationic growth factors with anionic sulfated glycosaminoglycans in the extracellular matrix, we developed electrospun poly(hydroxybutyrate)/gelatin (PG) fibers conjugated with anionic sulfated carboxymethylcellulose (sCMC) to enable growth factor immobilization via electrostatic interaction for tissue engineering. The fibrous scaffold bound cationic molecules, was cytocompatible and exhibited a remarkable morphological and functional stability. Transforming growth factor-β1 immobilized on the sCMC conjugated fibers was retained for at least 4 weeks with negligible release (3%). Immobilized fibroblast growth factor-2 and connective tissue growth factor were bioactive and induced proliferation and fibrogenic differentiation of infrapatellar fat pad derived mesenchymal stem cells respectively with efficiency similar to or better than free growth factors. Taken together, our studies demonstrate that sCMC conjugated PG fibers can immobilize and retain function of cationic growth factors and hence show potential for use in various tissue engineering applications., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Bacterial adhesion and the succeeding biofilm formation onto surfaces are responsible for implant- and device-associated infections. Bifunctional coatings integrating both nonfouling components and antimicrobial peptides (AMPs) are a promising approach to develop potent antibiofilm coatings. However, the current approaches and chemistry for such coatings are time-consuming and dependent on substrates and involve a multistep process. Also, the information is limited on the influence of the coating structure or its components on the antibiofilm activity of such AMP-based coatings. Here, we report a new strategy to rapidly assemble a stable, potent, and substrate-independent AMP-based antibiofilm coating in a nonfouling background. The coating structure allowed for the screening of AMPs in a relevant nonfouling background to identify optimal peptide combinations that work in cooperation to generate potent antibiofilm activity. The structure of the coating was changed by altering the organization of the hydrophilic polymer chains within the coatings. The coatings were thoroughly characterized using various surface analytical techniques and correlated with the efficiency to prevent biofilm formation against diverse bacteria. The coating method that allowed the conjugation of AMPs without altering the steric protection ability of hydrophilic polymer structure results in a bifunctional surface coating with excellent antibiofilm activity. In contrast, the conjugation of AMPs directly to the hydrophilic polymer chains resulted in a surface with poor antibiofilm activity and increased adhesion of bacteria. Using this coating approach, we further established a new screening method and identified a set of potent surface-tethered AMPs with high activity. The success of this new peptide screening and coating method is demonstrated using a clinically relevant mouse infection model to prevent catheter-associated urinary tract infection (CAUTI).

Meniscus regeneration could be enhanced by targeting meniscus cells and mesenchymal stromal cells (MSCs) with the right growth factors. Combining these growth factors with the Collagen Meniscus Implant (CMI®) could accelerate cell ingrowth and tissue formation in the implant and thereby improve clinical outcomes. Using a transwell migration assay and a micro-wound assay, the effect of insulin-like growth factor-1, platelet-derived growth factor (PDGF), vascular endothelial growth factor (VEGF), transforming growth factor beta 1 (TGF-β1), fibroblast growth factor, and platelet lysate (PL) on migration and proliferation of meniscus cells and MSCs was assessed. The formation of extracellular matrix under influence of the above-mentioned growth factors was assessed after 28 days of culture of both MSCs and meniscus cells. As a proof of concept, the CMI® was functionalized with a VEGF binding peptide and coated with platelet-rich plasma (PRP) for clinical application. Our results demonstrate that PDGF, TGF-β1, and PL stimulate migration, proliferation, and/or extracellular matrix production of meniscus cells and MSCs. Additionally, the CMI® was successfully functionalized with a VEGF binding peptide and PRP which increased migration of meniscus cell and MSC into the implant. This study demonstrates proof of concept of functionalizing the CMI® with growth factor binding peptides. A CMI® functionalized with the right growth factors holds great potential for meniscus replacement after partial meniscectomy., (© 2021 The Authors. Journal of Tissue Engineering and Regenerative Medicine published by John Wiley & Sons Ltd.)

Nature utilizes endothelium as a blood interface that perfectly controls hemostasis, preventing the uncontrolled formation of thrombi. The management of positive and negative feedback that finely tunes thrombosis and fibrinolysis is essential for human life, especially for patients who undergo extracorporeal circulation (ECC) after a severe respiratory or cardiac failure. The exposure of blood to a surface different from healthy endothelium inevitably initiates coagulation, drastically increasing the mortality rate by thromboembolic complications. In the present study, an ultrathin antifouling fibrinolytic coating capable of disintegrating thrombi in a self-regulated manner is reported. The coating system is composed of a polymer brush layer that can prevent any unspecific interaction with blood. The brushes are functionalized with a tissue plasminogen activator (tPA) to establish localized fibrinolysis that solely and exclusively is active when it is required. This interactive switching between the dormant and active state is realized through an amplification mechanism that increases (positive feedback) or restores (negative feedback) the activity of tPA depending on whether a thrombus is detected and captured or not. Thus, only a low surface density of tPA is necessary to lyse real thrombi. Our work demonstrates the first report of a coating that self-regulates its fibrinolytic activity depending on the conditions of blood.

Platelet-derived growth factor-bb (PDGF-BB) is a potent chemokine and mitogen for fibroblasts, keratinocytes, and vascular endothelium in the injured area, believed to be effective in wound healing. However, the short half-life of PDGF-BB and its rapid release from the wound surface limited its efficacy in vivo and vitro. To evaluate the wound healing effects of dorsal skin in SD rats with polydopamine-assisted immobilized PDGF-BB on PLGA nanofibrous substrate. First, the effects of pDA-coating and PDGF-BB immobilization on the morphology, compositions, and hydrophilicity of substrates were evaluated in details. Second, the wound healing effect of pDA/PLGA/PDGF-BB substrate was assessed in the dorsal skin of SD rats. Last, the cytokine analysis by ELISA method was employed to evaluate the advantages of pDA/PLGA/PDGF-BB substrate on anti-inflammatory, angiogenesis, and cellular proliferation. This method significantly improved the immobilization amount and stability of PDGF-BB on the substrate (p<0.01), further improved the hydrophilicity of substrates (p<0.05). Furthermore, the wound closure process was much more accelerated in the pDA/PLGA/PDGF-BB group (p<0.05). H&E and CD31 staining informed that the wound treated by pDA/PLGA/PDGF-BB substrate showed a high degree of regeneration and angiogenesis. The cytokine analysis showed that pDA significantly reduced the high level of inflammatory cytokines such as TNF-α (p<0.05). And the immobilized PDGF-BB significantly elevated the level of TGF-β and VEGF (p<0.05). The pDA/PLGA/PDGF-BB substrate showed great therapeutic effect on wound healing compared with other control groups via regulating anti-inflammatory, angiogenesis, and cellular proliferation. Absolutely, this report offered an available novel method for skin regeneration., Competing Interests: The authors have declared that no competing interests exist.

Neural stem cells (NSCs) provide a strategy to replace damaged neurons following traumatic central nervous system injuries. A major hurdle to translation of this therapy is that direct application of NSCs to CNS injury does not support sufficient neurogenesis due to lack of proper cues. To provide prolonged spatial cues to NSCs IFN-γ was immobilized to biomimetic hydrogel substrate to supply physical and biochemical signals to instruct the encapsulated NSCs to be neurogenic. However, the immobilization of factors, including IFN-γ, versus soluble delivery of the same factor, has been incompletely characterized especially with respect to activation of signaling and metabolism in cells over longer time points. In this study, protein and metabolite changes in NSCs induced by immobilized versus soluble IFN-γ at 7 days were evaluated. Soluble IFN-γ, refreshed daily over 7 days, elicited stronger responses in NSCs compared to immobilized IFN-γ, indicating that immobilization may not sustain signaling or has altered ligand/receptor interaction and integrity. However, both IFN-γ delivery types supported increased βIII tubulin expression in parallel with canonical and noncanonical receptor-signaling compared to no IFN-γ. Global metabolomics and pathway analysis revealed that soluble and immobilized IFN-γ altered metabolic pathway activities including energy, lipid, and amino acid synthesis, with soluble IFN-γ having the greatest metabolic impact overall. Finally, soluble and immobilized IFN-γ support mitochondrial voltage-dependent anion channel (VDAC) expression that correlates to differentiated NSCs. This work utilizes new methods to evaluate cell responses to protein delivery and provides insight into mode of action that can be harnessed to improve regenerative medicine-based strategies.

Recurrent caries, the development of carious lesions at the interface between the restorative material and the tooth structure, is highly prevalent and represents the primary cause for failure of dental restorations. Correspondingly, we exploited the self-assembly and strong antibiofilm activity of amphipathic antimicrobial peptides (AAMPs) to form novel coatings on dentin that aimed to prevent recurrent caries at susceptible cavosurface margins. AAMPs are alternative to traditional antimicrobial agents and antibiotics with the ability to target the complex and heterogeneous organization of microbial communities. Unlike approaches that have focused on using these AAMPs in aqueous solutions for a transient activity, here we assess the effects on microcosm biofilms of a long-acting AAMPs-based antibiofilm coating to protect the tooth-composite interface. Genomewise, we studied the impact of AAMPs coatings on the dental plaque microbial community. We found that non-native all D-amino acids AAMPs coatings induced a marked shift in the plaque community and selectively targeted three primary acidogenic colonizers, including the most common taxa around Class II composite restorations. Accordingly, we investigated the translational potential of our antibiofilm dentin using multiphoton pulsed near infra-red laser for deep bioimaging to assess the impact of AAMPs-coated dentin on plaque biofilms along dentin-composite interfaces. Multiphoton enabled us to record the antibiofilm potency of AAMPs-coated dentin on plaque biofilms throughout exaggeratedly failed interfaces. In conclusion, AAMPs-coatings on dentin showed selective and long-acting antibiofilm activity against three dominant acidogenic colonizers and potential to resist recurrent caries to promote and sustain the interfacial integrity of adhesive-based interfaces., Competing Interests: The authors have declared that no competing interests exist.

The management of thrombosis and bacterial infection is critical to ensure the functionality of medical devices. While administration of anticoagulants is the current antithrombotic clinical practice, a variety of complications, such as uncontrolled hemorrhages or heparin-induced thrombocytopenia, can occur. Additionally, infection rates remain a costly and deadly complication associated with use of these medical devices. It has been hypothesized that if a synthetic surface could mimic the biochemical mechanisms of the endothelium of blood vessels, thrombosis could be reduced, anticoagulant use could be avoided, and infection could be prevented. Herein, the interfacial biochemical effects of the endothelium were mimicked by altering the surface of medical grade silicone rubber (SR). Surface modification was accomplished via heparin surface immobilization (Hep) and the inclusion of a nitric oxide (NO) donor into the SR polymeric matrix to achieve synergistic effects (Hep-NO-SR). An in vitro bacteria adhesion study revealed that Hep-NO-SR exhibited a 99.46 ± 0.17% reduction in viable bacteria adhesion compared to SR. An in vitro platelet study revealed Hep-NO-SR reduced platelet adhesion by 84.12 ± 6.19% compared to SR, while not generating a cytotoxic response against fibroblast cells. In a 4 h extracorporeal circuit model without systemic anticoagulation, all Hep-NO-SR samples were able to maintain baseline platelet count and device patency; whereas 66% of SR samples clotted within the first 2 h of study. Results indicate that Hep-NO-SR creates a more hemocompatible and antibacterial surface by mimicking two key biochemical functions of the native endothelium.

Glial scars formed after brain injuries provide permissive cues for endogenous neural precursor/stem cells (eNP/SCs) to undergo astrogenesis rather than neurogenesis. Following brain injury, eNP/SCs from the subventricular zone leave their niche, migrate to the injured cortex, and differentiate into reactive astrocytes that contribute to glial scar formation. In vivo neuronal reprogramming, directly converting non-neuronal cells such as reactive astrocytes or NG2 glia into neurons, has greatly improved brain injury repair strategies. However, reprogramming carries a high risk of future clinical applications such as tumorigenicity, involving virus. In this study, we constructed a neural matrix to alter the adverse niche at the injured cortex, enabling eNP/SCs to differentiate into functional neurons. We found that the neural matrix functioned as a "glial trap" that largely concentrated and limited reactive astrocytes to the core of the lesion area, thus altering the adverse niche. The eNP/SCs migrated toward the injured cortex and differentiated into functional neurons. In addition, regenerated neurites extended across the boundary of the injured cortex. Mice treated with the neural matrix demonstrated significant behavioral recovery. For the first time, we induced eNP/SC-derived functional neurons in the cortex after brain injury without the use of viruses, microRNAs, or small molecules. Our novel strategy of applying this "glial trap" to obtain functional neurons in the injured cortex may provide a safer and more natural therapeutic alternative to reprogramming in future clinical applications.

Insufficient vascularization limits the volume and complexity of engineered tissue. The formation of new blood vessels (neovascularization) is regulated by a complex interplay of cellular interactions with biochemical and biophysical signals provided by the extracellular matrix (ECM) necessitating the development of biomaterial approaches that enable systematic modulation in matrix properties. To address this need poly(ethylene) glycol-based hydrogel scaffolds were engineered with a range of decoupled and combined variations in integrin-binding peptide (RGD) ligand concentration, elastic modulus and proteolytic degradation rate using free-radical polymerization chemistry. The modularity of this system enabled a full factorial experimental design to simultaneously investigate the individual and interaction effects of these matrix cues on vascular sprout formation in 3 D culture. Enhancements in scaffold proteolytic degradation rate promoted significant increases in vascular sprout length and junction number while increases in modulus significantly and negatively impacted vascular sprouting. We also observed that individual variations in immobilized RGD concentration did not significantly impact 3 D vascular sprouting. Our findings revealed a previously unidentified and optimized combination whereby increases in both immobilized RGD concentration and proteolytic degradation rate resulted in significant and synergistic enhancements in 3 D vascular spouting. The above-mentioned findings would have been challenging to uncover using one-factor-at-time experimental analyses.

This study analyzed the influence of titanium (TiO 2 ) surface modifications with two osteogenic proteins (BMP-2, BMP-7) and an anti-osteoclastic drug (alendronic acid [AA]) on sandblasted/acid-etched (SLA) and plain TiO 2 (PT) on cell adhesion, proliferation and differentiation (alkaline phosphatase [AP] and osteocalcin [OC]) of bone-marrow derived stem cells (BMSCs) after 1, 3 and 7 days in-vitro. Initially, AA surfaces showed the highest cell number and surface coverage. At day 3 and 7, BMP and AA-modified surfaces exhibited a significantly enhanced cell growth. For proliferation, at days 3 and 7, an enhancement on BMP-2, BMP-7 and AA-surfaces was seen. At day 7, SLA also showed a higher proliferation when compared to PT. Initially, AP expression was elevated on SLA and AA surfaces. At days 3 and 7, a significant increased AP expression was seen for SLA, BMP-2, BMP-7 and AA discs. For OC, SLA and AA surfaces had the highest expression after 1 day whereas after 3 and 7 days a significant difference was recorded for SLA, BMP-2, BMP-7 and AA. In conclusion, a beneficial biological effect of a chemical immobilization method of BMP-2, BMP-7 and alendronate onto titanium surfaces on BMSCs was proven., (© 2019 The Authors. Journal of Biomedical Materials Research Part A published by Wiley Periodicals, Inc.)

Spinal cord injury (SCI) can lead to permanent and severe functional impairment below the lesion level and is still one of the most challenging clinical problems. The treatment of SCI has progressed with the development of tissue engineering techniques. Insulin-like growth factor 1 (IGF-1) and brain-derived neurotrophic factor (BDNF) are growth factors closely related to nerve regeneration. In this study, IGF-1 and BDNF were successfully immobilized on biodegradable graphene oxide (GO)-incorporated PLGA (PLGA/GO) electrospun nanofibres. The effect of PLGA/GO nanofibres with immobilized IGF-1 and BDNF on neurogenesis was investigated in vitro and in vivo utilizing MTT assays, immunofluorescence, motor function detection and histology observations. We demonstrated that PLGA/GO nanofibres loaded with IGF-1 and BDNF not only protected NSCs from oxidative stress induced by H 2 O 2 but also enhanced NSC proliferation and neuronal differentiation in vitro. The in vivo study of an SCI animal model demonstrated that local delivery of IGF-1 and BDNF immobilized to PLGA/GO nanofibres significantly improved functional locomotor recovery, reduced cavity formation and increased the number of neurons at the injury site. Our study indicated that PLGA/GO is an effective carrier for IGF-1 and BDNF delivery and that immobilization of IGF-1 and BDNF onto PLGA/GO nanofibres has a great potential as a nerve implant for spinal cord injury applications.

Noncanonical Wnt signaling in stem cells is essential to numerous developmental events. However, no prior studies have capitalized on the osteoinductive potential of noncanonical Wnt ligands to functionalize biomaterials in enhancing the osteogenesis and associated skeleton formation. Here, we investigated the efficacy of the functionalization of biomaterials with a synthetic Wnt5a mimetic ligand (Foxy5 peptide) to promote the mechanosensing and osteogenesis of human mesenchymal stem cells by activating noncanonical Wnt signaling. Our findings showed that the immobilized Wnt5a mimetic ligand activated noncanonical Wnt signaling via the up-regulation of Disheveled 2 and downstream RhoA-ROCK signaling, leading to enhanced intracellular calcium level, F-actin stability, actomyosin contractility, and cell adhesion structure development. This enhanced mechanotransduction in stem cells promoted the in vitro osteogenic lineage commitment and the in vivo healing of rat calvarial defects. Our work provides valuable guidance for the developmentally inspired design of biomaterials for a wide array of therapeutic applications., (Copyright © 2019 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution NonCommercial License 4.0 (CC BY-NC).)

It is important to control immediate hemorrhage and prevent infection simultaneously in the wound management. However, most of hemostatic materials are associated with low efficiency of hemostasis, poor biocompatibility and lack of antimicrobial properties. A kind of starch-based macroporous sponges (KR-Sps) immobilized covalently with antimicrobial peptide KR12 using highly efficient thiol-ene photo click reaction were developed. The physical properties of these sponges could be fine-tuned by varying the ratio of modified starch/HS-PEG-SH and the polymer concentration. The in vitro and vivo results demonstrated that KR-Sps induced thrombosis, shortened clotting time and reduced the blood loss at bleeding site. Besides, KR12 immobilized sponge exhibited inherent antimicrobial properties against Gram (+) and (-) bacteria and methicillin-resistant Staphylococcus aureus (MRSA), which could maintain at least 5 days. Therefore, KR-Sps were believed to be an excellent candidate as hemostatic and antimicrobial product for the intraoperative wound management., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

We reported the preparation of antibacterial corn starch film (57% reduction in bacterial count) with enhanced tensile strength (69%) by incorporating immobilized bacteriocin. Whisker shaped crystalline nanocellulose (CNC, length 71.2 ± 20.7 nm and width 27.8 ± 11.2 nm) was prepared from cotton linters by bio-mechanical process, having the degree of polymerization 250. Bacteriocins extracted from broth cultures of P. acidilactici and E. faecium were immobilized on the surface of CNC and used to reinforce the starch film. The biodegradability of reinforced films was affected due to the use of bacteriocin in fillers. Surface morphology and roughness of reinforced films were studied by SEM and AFM. In an ambient environment, the films incorporated with bacteriocin immobilized CNC stayed fresh for 28 days while that of bacteriocin alone had fungal degradation in 14 days. This supports the requirement of CNC immobilization for better stability of bacteriocin on storage., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

As an oxygen-transporting protein, free hemoglobin (Hb) often suffers from the disadvantage of undesirable stability and short blood circulation, which severely impairs the potential clinical applications as the blood substitute. In this work, Hb was facilely encapsulated into a kind of metal-organic frameworks (MOFs) (ZIF-8) inspired by the natural biomineralization process. The obtained ZIF-8 encapsulating Hb (ZIF-8@Hb) showed the small hydrodynamic size of 180.8 nm and neutral zeta potential of -2.1 mV by adjusting the ratio of Hb in ZIF-8 frameworks. Intriguingly, Hb encapsulated by ZIF-8 exhibited significantly enhanced stability in alkaline, oxidation, high temperature, or enzymatic environment compared with free Hb because of the excellent protective MOF coatings. More importantly, the negative charge of Hb neutralized the original positive charge of ZIF-8, which led to the better biocompatibility, lower protein adsorption, and macrophage uptake of ZIF-8@Hb than bare ZIF-8 nanoparticles. Furthermore, ZIF-8@Hb displayed extended blood circulation with the elimination half-life of 13.9 h as well as reduced nonspecific distribution in normal organs compared with free Hb or ZIF-8 nanoparticles. With the above advantages, ZIF-8@Hb showed significantly extended survival time of mice in a disease model of hemorrhagic shock compared with free Hb or bare ZIF-8 nanoparticles. Overall, this work offers a high-stable and long-circulating oxygen carrier platform, which may find wide applications as a blood substitute to treat various oxygen-relevant diseases.

Background: Nerve regeneration is important for the treatment of degenerative diseases and neurons injured by accidents. Nerve growth factor (NGF) has been previously conjugated to materials for promotion of neurogenesis., Materials and Methods: Photoreactive gelatin was prepared by chemical coupling of gelatin with azidobenzoic acid (P-gel), and then NGF was immobilized on substrates in the presence or absence of micropatterned photomasks. UV irradiation induced crosslinking reactions of P-gel with itself, NGF, and the plate for immobilization., Results: By adjustment of the P-gel concentration, the nanometer-order height of micropatterns was controlled. NGF was quantitatively immobilized with increasing amounts of P-gel. Immobilized NGF induced neurite outgrowth of PC12 cells, a cell line derived from a pheochromocytoma of the rat adrenal medulla, at the same level as soluble NGF. The immobilized NGF showed higher thermal stability than the soluble NGF and was repeatedly used without loss of biological activity. The 3D structure (height of the formed micropattern) regulated the behavior of neurite guidance. As a result, the orientation of neurites was regulated by the stripe pattern width., Conclusion: The micropattern-immobilized NGF nanolayer biochemically and topologically regulated neurite formation., Competing Interests: The authors report no conflicts of interest in this work., (© 2019 Kim et al.)

Capture of endothelial progenitor cells (EPCs) in situ has been considered as a promising strategy for the rapid endothelialization and long-term patency of artificial blood vessels and implant devices. In this study, a CD133 + EPC capture surface was fabricated by grafting CD133 antibody (a more specific EPC surface marker than CD34) and Arg-Glu-Asp-Val (REDV) peptideon the methacrylate-grafted hyaluronic acid (MA-HA) and heparin-hybridized (MA-HA&Heparin) resisting layer. Vascular endothelial growth factor (VEGF) was further conjugated to the immobilized heparin. This engineered surface showed good hemocompatibility and significantly higher ability of capturing CD133 + EPCs from human peripheral blood mononuclear cells (PBMCs) and obviously upregulated the expression of endothelial cell (EC) marker genes of EPCs such as VEGF receptor 2 (VEGFR2), CD31, VE-cadherin, and von Willebrand factor (vWF), facilitating the differentiation of EPCs into ECs. The dramatically enhanced EPC proliferation on this surface was dependent on the integrin-VEGFR synergistic signaling, as ERK1/2 phosphorylation was only significantly enhanced on the REDV and VEGF co-immobilized surface. This study highlights a new surface coating strategy for blood-contact materials based on the specific EPC capturing and rapid endothelialization. STATEMENT OF SIGNIFICANCE: Capture of endothelial progenitor cells (EPCs) in situ is a promising strategy for the rapid endothelialization and long-term patency of artificial blood vessels and scaffolds. More specific capture of EPCs by targeting CD133 rather than CD34 can better reduce the risk of inflammation and restenosis. On the other hand, an appropriate microenvironment for EPC proliferation is equally important for endothelialization, which is rarely considered by the existing EPC capture strategies. In this study, the capture ratio of EPCs was significantly increased by simultaneously grafting CD133 antibody and VEGF on a MA-HA and heparin-hybridized antifouling layer. Further, proliferation of EPCs after capture was significantly promoted by grafting VEGF and REDV peptide through the integrin-VEGFR synergistic signaling. This study highlights a new strategy for the surface coating of blood-contact materials based on specific EPC capture and rapid endothelialization., (Copyright © 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Insufficient endogenous neural stem cell (NSC) migration to injury sites and incomplete replenishment of neurons complicates recovery following central nervous system (CNS) injury. Such insufficient migration can be addressed by delivering soluble chemotactic factors, such as stromal cell-derived factor 1-α (SDF-1α), to sites of injury. However, simply enhancing NSC migration is likely to result in insufficient regeneration, as the cells need to be given additional signals. Immobilized proteins, such as interferon-γ (IFN-γ) can encourage neurogenic differentiation of NSCs. Here, we combined both protein delivery paradigms: soluble SDF-1α delivery to enhance NSC migration alongside covalently tethered IFN-γ to differentiate the recruited NSCs into neurons. To slow the release of soluble SDF-1α, we copolymerized methacrylated heparin with methacrylamide chitosan (MAC), to which we tethered IFN-γ. We found that this hydrogel system could result in soft hydrogels with a ratio of up to 70:30 MAC/heparin by mass, which enabled the continuous release of SDF-1α over a period of 2 weeks. The hydrogels recruited NSCs in vitro over 2 weeks, proportional to their release rate: the 70:30 heparin gels recruited a consistent number of NSCs at each time point, while the formulations with less heparin recruited NSCs at only early time points. After remaining in contact with the hydrogels for 8 days, NSCs successfully differentiated into neurons. CNS regeneration is a complex challenge, and this system provides a foundation to address multiple aspects of that challenge.

Over the past few decades, titanium (Ti) implants have been widely used to repair fractured bones. To promote osteogenesis, immobilization of osteoinductive agents, such as recombinant human bone morphogenic protein-2 (rhBMP2), onto the Ti surface is required. In this study, we prepared rhBMP2 immobilized on glycidyl methacrylate (GMA) deposited Ti surface through initiated chemical vapor deposition (iCVD) technique. After preparation, the bio-functionalized Ti surface was characterized by physicochemical analysis. For in vitro analysis, the developed Ti was evaluated by cell proliferation, alkaline phosphatase activity, calcium deposition, and real-time polymerase chain reaction to verify their osteogenic activity against human adipose-derived stem cells (hASCs). The GMA deposited Ti surface was found to effectively immobilize a large dose of rhBMP2 as compared to untreated Ti. Additionally, rhBMP2 immobilized on Ti showed significantly enhanced osteogenic differentiation and increased calcium deposition with nontoxic cell viability. These results clearly confirm that our strategy may provide a simple, solvent-free strategy to prepare an osteoinductive Ti surface for bone tissue engineering applications., (Copyright © 2019 Elsevier B.V. All rights reserved.)

We screened a family of nonspecific cell-repelling polyurethanes (PUs) whose backbones are attached with epoxy group-terminated polyethylene glycol (PEG) side chains. Water incubation of the PU films (with 9.2-31.1 wt % PEG) caused a surface enrichment of PEG chains where vascular endothelial growth factor (VEGF) was grafted by forming secondary amine linkages between VEGF molecules and the PEG spacer. These linkages are still ionizable similar to original primary amines in VEGF, thereby retaining the original charge distribution on VEGF macromolecules. This charge conservation together with PEG steric repulsion helped to preserve VEGF conformation and bioactivity. The PU substrates with suitable hard segments contents and VEGF surface densities can selectively induce endothelial cells (ECs) adhesion and proliferation toward endothelialization. Moreover, the PU substrates, even grafted with fibrinogen (Fg), cannot trigger platelet adhesion and deformation, suggesting an inactive conformation of the grafted Fg. Thus enough antithrombogenicity of the PU substrates could be expected before full endothelialization. These PU materials might be applied onto the lumens of vascular grafts, potentially stimulating luminal endothelialization in vivo. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 965-977, 2019., (© 2018 Wiley Periodicals, Inc.)

Enterococcus faecium (E. faecium) isolated from Vigna mungo (Black gram) produced bacteriocin that inhibits both Gram positive and Gram negative bacteria and better heat stability (100 °C for 30 min). The bacteriocin was sensitive to protease treatment and most active in acidic pH. Bacteriocin produced by Pediococcus acidilactici was used for comparison. To enhance stability for diversified applications, the bacteriocin was immobilized by physical adsorption onto cellulose nanocrystals (CNC) extracted from cotton linters. The bacteriocin immobilization yield was 64.91% for P. acidilactici and 53.63% for E. faecium. The bacteriocin immobilized CNC was characterized by DLS particle sizing, FTIR and AFM to evaluate size distribution, chemical nature and surface morphology. The bacteriocins immobilized on CNC showed 50% increase in stability in terms of antibacterial activity. The enzymatic synthesis of CNC in combination with physical adsorption immobilization method for bacteriocin makes it an efficient system of producing antibacterial nanofillers for food packaging and bio-composites applications., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Modulation of material properties and growth factor application are critical in constructing suitable cell culture environments to induce desired cellular functions. Sulfonated polyrotaxane (PRX) surfaces with immobilized vascular endothelial growth factors (VEGFs) are prepared to improve network formation in vascular endothelial cells. Sulfonated PRXs, whereby sulfonated α-cyclodextrins (α-CDs) are threaded onto a linear poly(ethylene glycol) chain capped with bulky groups at both terminals, are coated onto surfaces. The molecular mobility of sulfonated PRX surfaces is modulated by tuning the number of threading α-CDs. VEGF is immobilized onto surfaces with varying mobility. Low mobility and VEGF-immobilization reinforce cell proliferation, yes-associated protein activity, and rhoA, pdgf, ang-1, and pecam-1 gene expression. Highly mobile surfaces and soluble VEGF weakly affect these cell responses. Network formation is strongly stimulated in vascular endothelial cells only on low-mobility VEGF-immobilized surfaces, suggesting that molecular mobility and VEGF immobilization synergistically control cell function., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Objectives: Fungal biofilms caused by Candida spp. are a major contributor to infections originating from infected biomaterial implants. Since echinocandin-class molecules interfere with the integrity of the fungal cell wall, it was hypothesized that surface-immobilized anidulafungin and micafungin could play a role in preventing fungal adhesion and biofilm formation on surfaces., Methods: Anidulafungin and micafungin were covalently coupled to biomaterial surfaces and washed. Surface-sensitive instrumental analysis quantitatively and qualitatively confirmed their presence. Analysis after washing experiments provided evidence of their covalent immobilization. The in vitro antifungal properties of surfaces were confirmed using static biofilm assays and fluorescence microscopy kinetic studies., Results: Antifungal surface coatings eliminated 106 cfu/cm2 inoculations of Candida albicans and prevented biofilm formation and hyphal development on coated surfaces. Surfaces were successively exposed to fresh inoculum and were effective for at least five challenges in eliminating adherent yeasts., Conclusions: We have observed antifungal and anti-biofilm activity of surfaces bearing conjugated echinocandins, which operate through surface contact. The analytical and biological evidence suggests an antifungal mechanism for echinocandins that does not rely upon freely diffusing molecules.

The osteogenetic potential of photo-immobilized azdiophenyl (Az)-natural polymers as a carrier of bone morphogenetic protein-2 (BMP-2) was assessed in 56 rats randomized to four groups. The control group comprised implanted collagen sheet with BMP-2. In the three experimental groups, the implant comprised collagen sheet with photo-immobilized BMP-2 on Az-gelatin (Az-Gel), Az-O-carboxymethyl chitosan (Az-OMC), or Az‑O‑carboxymethyl low molecular chitosan (Az-LMC). Micro-computed tomography analysis revealed more regenerated bone in Az-Gel at 8weeks. Immunohistochemical analysis at 4weeks revealed that the positively expressed cellular ratio in RUNX2-stained cells was significantly higher in Az-Gel and Az-OMC groups. At 8weeks, only the Az-Gel group showed higher positively expressed cellular ratio compared with the control group. These results demonstrate the superior osteogenetic potential of photo-immobilized BMP-2 using Az-Gel carrier in a rat calvarial defect model compared with control group. Photo-immobilization of BMP-2 using Az-gelatin could be a more effective carrier system of BMP-2 than a chitosan-based carrier system., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Expansion of human induced pluripotent stem cells (h-iPSCs) on mouse derived feeder layers or murine cells secretions such as Matrigel hamper their clinical applications. Alternative methods have introduced novel substrates as stem cell niches or/and optimized combinations of humanized soluble factors as fully defined mediums. Accordingly vitronectin as a main part of ECM have been commercialized significantly as a stem cell niche-forming substrate. In this work, we used a functional peptide derived from vitronectin (VTN) and co-immobilized it with FGF-2 (as an indisputable ingredient of defined culture mediums) on chitosan film surface. After chemical and physical characterization of the pristine chitosan surface as well as ones modified by VTN or/and FGF-2, h-iPS cells were cultured on them at the xeno/feeder-free conditions. Our results demonstrated that co-immobilization of these two biomolecules has a synergistic effect on adhesion and clonal growth of h-iPS cells with maintained expression of pluripotency markers in a FGF-2 density-dependent manner. This is the first report of co-immobilization of an ECM derived molecule and a growth factor for stem cell culture., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Platelets play a major role in hemostatic events and are associated with various pathological events, such as arterial thrombosis and atherosclerosis. Iridium (Ir) compounds are potential alternatives to platinum compounds, since they exert promising anticancer effects without cellular toxicity. Our recent studies found that Ir compounds show potent antiplatelet properties. In this study, we evaluated the in vitro antiplatelet, in vivo antithrombotic and structure⁻activity relationship (SAR) of newly synthesized Ir complexes, Ir-1, Ir-2 and Ir-4, in agonists-induced human platelets. Among the tested compounds, Ir-1 was active in inhibiting platelet aggregation induced by collagen; however, Ir-2 and Ir-4 had no effects even at their maximum concentrations of 50 μM against collagen and 500 μM against U46619-induced aggregation. Similarly, Ir-1 was potently inhibiting of adenosine triphosphate (ATP) release, calcium mobilization ([Ca 2+ ]i) and P-selectin expression induced by collagen-induced without cytotoxicity. Likewise, Ir-1 expressively suppressed collagen-induced Akt, PKC, p38MAPKs and JNK phosphorylation. Interestingly, Ir-2 and Ir-4 had no effect on platelet function analyzer (PFA-100) collagen-adenosine diphosphate (C-ADP) and collagen-epinephrine (C-EPI) induced closure times in mice, but Ir-1 caused a significant increase when using C-ADP stimulation. Other in vivo studies revealed that Ir-1 significantly prolonged the platelet plug formation, increased tail bleeding times and reduced the mortality of adenosine diphosphate (ADP)-induced acute pulmonary thromboembolism in mice. Ir-1 has no substitution on its phenyl group, a water molecule (like cisplatin) can replace its chloride ion and, hence, the rate of hydrolysis might be tuned by the substituent on the ligand system. These features might have played a role for the observed effects of Ir-1. These results indicate that Ir-1 may be a lead compound to design new antiplatelet drugs for the treatment of thromboembolic diseases.

Understanding the adsorption of immunoglobulin G (IgG) on biomaterials surfaces is crucial for design and modification of the surfaces to alleviate inflammatory responses after implantation. Here, we report direct visualization and two-dimensional (2D) image interpretation of the IgG molecule adsorbed on simplified surfaces by single particle electron microscopy and atomic force microscopy. Influence of the orientational changes in adsorbed IgG on phagocytosis of macrophages against Staphylococcus epidermidis is further examined. Untreated amorphous carbon film and -COOH and -NH 2 grafted carbon films are employed as the model surfaces for the adsorption testing. Results show that IgG displays flat orientation lying on the untreated surface, while forms vertical orientations standing on the functionalized surfaces. These specific spatial alignments are associated with altered unfolding extent and structure rearrangement of IgG domains, which are influenced synergistically by surface charge and wettability of the substrata. The changes in interdomain distance of IgG molecules subsequently regulate immune behaviors of macrophages and phagocytosis of S. epidermidis. The results would give insight into appropriate design of biomaterial surfaces in nanoscales for desired inflammatory responses. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2838-2849, 2018., (© 2018 Wiley Periodicals, Inc.)

In several retinal degenerative disease pathologies, such as dry age-related macular degeneration (AMD), the retinal pigment epithelium (RPE) cell monolayer becomes dysfunctional. Promising tissue engineering treatment approaches implant RPE cells on scaffolds into the subretinal space. However, these approaches are not without challenges. Two major challenges that must be addressed are RPE dedifferentiation and the inflammatory response to cell/scaffold implantation. Design and optimization of scaffold cues for the purpose of RPE transplantation remain relatively unexplored, specifically the mechanical properties of the scaffolds. Prior work from our group indicated that by varying substrate moduli significant differences could be induced in cell cytoskeleton structure, cellular activity, and expression of inflammatory markers. We hypothesized that Activin A would provide rescue effects for cells demonstrating dedifferentiated characteristics. Results demonstrated that for cells on low modulus scaffolds, the mechanical environment was the dominating factor and Activin A was unable to rescue these cells. However, Activin A did demonstrate rescue effects for cells on high modulus scaffolds. This finding indicates that when cultured on scaffolds with an appropriate modulus, exogenous factors, such as Activin A, can improve RPE cell expression, morphology, and activity, while an inappropriate scaffold modulus can have devastating effects on RPE survival regardless of chemical stimulation. These findings have broad implications for the design and optimization of scaffolds for long-term successful RPE transplantation. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2871-2880, 2018., (© 2018 Wiley Periodicals, Inc.)

Bone morphogenetic protein-2 (BMP-2) involved therapy is of great potential for bone regeneration. However, its clinical application is restricted due to the undesirable bioactivity and relevant complications in vivo. Immobilization of recombinant BMP-2 (rhBMP-2) is an efficient strategy to mimic natural microenvironment and retain its bioactivity. Herein, we present evidences indicating that osteoinductive capacity of rhBMP-2 can be regulated via variant immobilizing approaches. Three representative superficial immobilizing models were employed to fabricate rhBMP-2-immobilized surfaces including physical adsorption (Au/rhBMP-2), covalent grafting (rhBMP-2-SAM-Au) and heparin binding (Hep-SAM-Au/rhBMP-2) (SAM: self-assembled monolayer). Loading capacity, releasing behavior, osteogenic differentiation and signaling pathways involved, as well as the cellular recognition of rhBMP-2 under various immobilization modes were systematically investigated. As a result, disparate immobilizing approaches not only have effects on loading capacity, but also lead to disparity of osteoinduction at the same dosage. Notably, heparin could reinforce the recognition between rhBMP-2 and its receptors (BMPRs) whereas weaken its binding to its antagonist Noggin. Owing to this "selective" binding feature, the favorable osteoinduction and maximum ectopic bone formation can be achieved with the heparin-binding approach. In particular, manipulation of orientation-mediated BMP-2-cell recognition efficiency may be a potential target to design more therapeutic efficient rhBMP-2 delivery system. STATEMENT OF SIGNIFICANCE: Bone morphogenetic protein-2 (BMP-2) is crucial in bone regeneration. However, its clinical application is challenged due to its shorten half-life and supra-physiological dose associated complications. In this study, three representative superficial immobilizing patterns were fabricated through physical adsorption, covalent grafting and electrostatic interaction with heparin respectively. We provided evidences indicating an dose-dependent osteoinductive capacity of immobilized BMP-2. Further, a possible mechanism of rhBMP-2-cell recognition at the interface was presented, highlighting the superior effect of heparin on rhBMP-2 bioactivity. Finally, We proposed a dual mechanism of tuning the bioactivity of immobilized rhBMP-2 through surface immobilization approaches: regulation of the saturated loading capacity and orientation-mediated rhBMP-2-cell recognition. These results provide novel insights into designing criterion of efficient delivery vehicle for rhBMP-2., (Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

Advancements in bone tissue engineering require the improvement of tissue scaffolds, which should not only exhibit suitable mechanical properties and highly porous structures, but also effectively carry signaling molecules that can mediate bone formation and tissue regeneration. In the present study, we established chitosan/biphasic calcium phosphate (CS/BCP) scaffolds functionalized with Arg-Gly-Asp (RGD) and BMP-2-loaded nanoparticles. The resulting scaffolds were highly similar to natural bone extracellular matrix (ECM) in terms of composition and structural properties. First, we synthesized CS/BCP composite bionic scaffolds via the freeze-drying method. Then, RGD peptides were covalently conjugated onto the scaffolds via the EDC/NHS method. The BMP-2-encapsulated BSA nanoparticles were prepared via a desolvation method and then coated with CS and oxidized alginate to achieve sustained release of BMP-2. In vitro cell culture and in vivo implantation tests confirmed that RGD and BMP-2 synergistically enhanced cell attachment and spreading by providing integrin binding surface and facilitating osteogenic differentiation. In summary, the bioceramic/biopolymer scaffolds functionalized with signaling biomolecules successfully provided a favorable microenvironment for bone formation and thus serve as potential candidates for use in bone tissue engineering. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2613-2624, 2018., (© 2018 Wiley Periodicals, Inc.)

Breast cancer cell invasion is influenced by growth factor concentration gradients in the tumor microenvironment. However, studying the influence of growth factor gradients on breast cancer cell invasion is challenging due to both the complexities of in vivo models and the difficulties in recapitulating the tumor microenvironment with defined gradients using in vitro models. A defined hyaluronic acid (HA)-based hydrogel crosslinked with matrix metalloproteinase (MMP) cleavable peptides and modified with multiphoton labile nitrodibenzofuran (NDBF) was synthesized to photochemically immobilize epidermal growth factor (EGF) gradients. We demonstrate that EGF gradients can differentially influence breast cancer cell invasion and drug response in cell lines with different EGF receptor (EGFR) expression levels. Photopatterned EGF gradients increase the invasion of moderate EGFR expressing MDA-MB-231 cells, reduce invasion of high EGFR expressing MDA-MB-468 cells, and have no effect on invasion of low EGFR-expressing MCF-7 cells. We evaluate MDA-MB-231 and MDA-MB-468 cell response to the clinically tested EGFR inhibitor, cetuximab. Interestingly, the cellular response to cetuximab is completely different on the EGF gradient hydrogels: cetuximab decreases MDA-MB-231 cell invasion but increases MDA-MB-468 cell invasion and cell number, thus demonstrating the importance of including cell-microenvironment interactions when evaluating drug targets., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

The development of biomaterials for a range of tissue engineering applications increasingly requires control over the bioavailability of biomolecular cues such as growth factors in order to promote desired cell responses. While efforts have predominantly concentrated on covalently-bound or freely-diffusible incorporation of biomolecules in porous, three-dimensional biomaterials, opportunities exist to exploit transient interactions to concentrate growth factor activity over desired time frames. Here, we report the incorporation of β-cyclodextrin into a model collagen-GAG scaffold as a means to exploit the passive sequestration and release of growth factors via guest-host interactions to control mesenchymal stem cell differentiation. Collagen-GAG scaffolds that incorporate β-cyclodextrin show improved sequestration as well as extended retention and release of TGF-β1. We further show extended retention and release of TGF-β1 and BMP-2 from β-cyclodextrin modified scaffolds was sufficient to influence the metabolic activity and proliferation of mesenchymal stem cells as well as differential activation of Smad 2/3 and Smad 1/5/8 pathways associated with differential osteo-chondral differentiation. Further, gene expression analysis showed TGF-β1 release from β-cyclodextrin CG scaffolds promoted early chondrogenic-specific differentiation. Ultimately, this work establishes a novel method for the incorporation and display of growth factors within CG scaffolds via supramolecular interactions. Such a design framework offers opportunities to selectively alter the bioavailability of multiple biomolecules within a three-dimensional collagen-GAG scaffold to enhance cell activity for a range of musculoskeletal regenerative medicine applications., Statement of Significance: We describe the incorporation of β-cyclodextrin into a model CG-scaffold under development for musculoskeletal tissue engineering applications. We show β-cyclodextrin modified scaffolds promote the sequestration of soluble TGF-β1 and BMP-2 via guest-host interactions, leading to extended retention and release. Further, β-cyclodextrin modified CG scaffolds promote TGF-β1 or BMP-2 specific Smad signaling pathway activation associated with divergent osseous versus chondrogenic differentiation pathways in mesenchymal stem cells., (Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.)

There is a critical need for preventing peri-implantitis as its prevalence has increased and dental implants lack features to prevent it. Research strategies to prevent peri-implantitis have focused on modifying dental implants to incorporate different antimicrobial agents. An alternative strategy consists of barring the expansion of the biofilm subgingivally by forming a long-lasting permucosal seal between the soft tissue and the implant surface. Here, we innovatively biofunctionalized titanium with bioinspired peptide coatings to strengthen biological interactions between epithelial cells and the titanium surface. We selected laminin 332- and ameloblastin-derived peptides (Lam, Ambn). Laminin 332 participates in the formation of hemidesmosomes by keratinocytes and promotes epithelial attachment around teeth; and ameloblastin, an enamel derived protein, is involved in tissue regeneration events following disruption of the periodontium. Lam, Ambn or combinations of both peptides were covalently immobilized on titanium discs. Successful immobilization of the peptides was confirmed by contact angle goniometry, X-ray photoelectron spectroscopy and fluorescent labelling of the peptides. Additionally, we confirmed the mechanical and thermochemical stability of the peptides on Ti substrates. Proliferation and hemidesmosome formation of human keratinocytes (TERT-2/OKF-6) were assessed by immunofluorescence labelling. The peptide-coated surfaces increased cell proliferation for up to 48 h in culture compared to control surfaces. Most importantly, formation of hemidesmosomes by keratinocytes was significantly increased on surfaces coated with Ambn + Lam peptides compared to control (p < 0.01) and monopeptide coatings (p < 0.005). Together, these results support the Ambn + Lam multipeptide coating as a promising candidate for inducing a permucosal seal around dental implants.

Bacterial biofilms pose a major threat to public health, as they are associated with at least two thirds of all infections. They are highly resilient and render conventional antibiotics inefficient. As a part of the innate immune system, antimicrobial peptides have drawn attention within the last decades, as some of them are able to eradicate biofilms at sub-minimum inhibitory concentration (MIC) levels. However, peptides possess a number of disadvantages, such as susceptibility to proteolytic degradation, pH and/or salinity-dependent activity and loss of activity due to binding to serum proteins. Hence, proteolytically stable peptidomimetics were designed to overcome these drawbacks. This paper summarizes the current peptide and peptidomimetic strategies for combating bacteria-associated biofilm infections, both in respect to soluble and surface-functionalized solutions., Competing Interests: The authors declare no conflict of interest.

Targeted drug delivery is a promising strategy to promote effective delivery of conventional and emerging pharmaceuticals. The emergence of aptamers as superior targeting ligands to direct active drug molecules specifically to desired malignant cells has created new opportunities to enhance disease therapies. The application of biodegradable polymers as delivery carriers to develop aptamer-navigated drug delivery system is a promising approach to effectively deliver desired drug dosages to target cells. This study reports the development of a layer-by-layer aptamer-mediated drug delivery system (DPAP) via a w/o/w double emulsion technique homogenized by ultrasonication or magnetic stirring. Experimental results showed no significant differences in the biophysical characteristics of DPAP nanoparticles generated using the two homogenization techniques. The DPAP formulation demonstrated a strong targeting performance and selectivity towards its target receptor molecules in the presence of non-targets. The DPAP formulation demonstrated a controlled and sustained drug release profile under the conditions of pH 7 and temperature 37 °C. Also, the drug release rate of DPAP formulation was successfully accelerated under an endosomal acidic condition of ∼pH 5.5, indicating the potential to enhance drug delivery within the endosomal micro-environment. The findings from this work are useful to understanding polymer-aptamer-drug relationship and their impact on developing effective targeted delivery systems., (Copyright © 2018 Elsevier Masson SAS. All rights reserved.)

Sensorineural hearing loss (SNHL) can be overcome by electrical stimulation of spiral ganglion neurons (SGNs) via a cochlear implant (CI). Restricted CI performance results from the spatial gap between the SGNs and the electrode, but the efficacy of CI is also limited by the degeneration of SGNs as one consequence of SHNL. In the healthy cochlea, the survival of SGNs is assured by endogenous neurotrophic support. Several applications of exogenous neurotrophic supply have been shown to reduce SGN degeneration in vitro and in vivo. In the present study, nanoporous silica nanoparticles (NPSNPs), with an approximate diameter of <100 nm, were loaded with the brain-derived neurotrophic factor (BDNF) to test their efficacy as long-term delivery system for neurotrophins. The neurotrophic factor was released constantly from the NPSNPs over a release period of 80 days when the surface of the nanoparticles had been modified with amino groups. Cell culture investigations with NIH3T3 fibroblasts attest a good general cytocompatibility of the NPSNPs. In vitro experiments with SGNs indicate a significantly higher survival rate of SGNs in cell cultures that contained BDNF-loaded nanoparticles compared to the control culture with unloaded NPSNPs (p<0.001). Importantly, also the amounts of BDNF released up to a time period of 39 days increased the survival rate of SGNs. Thus, NPSNPs carrying BDNF are suitable for the treatment of inner ear disease and for the protection and the support of SGNs. Their nanoscale nature and the fact that a direct contact of the nanoparticles and the SGNs is not necessary for neuroprotective effects, should allow for the facile preparation of nanocomposites, e.g., with biocompatible polymers, to install coatings on implants for the realization of implant-based growth factor delivery systems.

Rapid in-situ re-endothelialization of coronary stents is one of the most effective approaches to inhibit late thrombosis and restenosis. Strut surfaces allowing excellent adhesion and migration of endothelial cells and endothelial progenitor cells may accelerate in-situ re-endothelialization. Here, a well-known endothelial cell adhesive peptide, Arg-Glu-Asp-Val (REDV), was directly immobilized onto metallic surfaces by means of single-step tyrosine oxidation with copper chloride (II) and hydrogen peroxide, which we recently reported as a new biomaterial modification technique. REDV immobilization on a 316L stainless steel plate improved endothelial cell adhesion and effectively suppressed platelet adhesion in vitro. In addition, a Co-Cr stent immobilized with Ac-Tyr-Gly-Gly-Gly-Arg-Glu-Asp-Val (Y-REDV) was implanted into a rabbit abdominal aorta. On 7 days postimplantation, 80% of the strut surface of the Y-REDV-immobilized stent was covered by a thin neointimal layer and was similar in appearance to native endothelium. Restenosis and late thrombosis were not observed in the Y-REDV-immobilized stent for 42 days. These findings suggest that direct immobilization of Y-REDV peptide onto metallic biomaterials by tyrosine oxidation is effective for promoting in-situ re-endothelialization in vascular stents. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 491-499, 2018., (© 2017 Wiley Periodicals, Inc.)

The availability of three-dimensional bioactive scaffolds with enhanced angiogenic capacity that have the capability to recruit tissue specific resident progenitors is of great importance for the regeneration of impaired skeletal muscle. Here, we have investigated whether introduction of chemoattractant factors to tissue specific extracellular matrix promotes cellular behaviour in vitro as well as muscle progenitor recruitment and vascularization in vivo. We developed an interconnective macroporous sponge from decellularized skeletal muscle with maintained biochemical traits of the intact muscle. SDF-1α, a potent cell homing factor involved in muscle repair, was physically adsorbed or chemically immobilized in these muscle-derived sponges. The immobilized sponges showed significantly higher SDF-1α conjugation efficiency along with improved metabolism and infiltration of muscle-derived stem cells in vitro, and thus generated uniform cellular constructs. In vivo, femoral muscle implantation in rats revealed a negligible immune response in all scaffold groups. We observed enhanced engraftment, neovascularization, and infiltration of CXCR4 + cells in the immobilized-SDF-1α sponge compared with nonimmobilized controls. Although Pax7 + cells identified adjacent to the immobilized-SDF-1α implantation site, other factors appear to be necessary for efficient penetration of Pax7 + cells into the sponge. These findings suggest that immobilization of cell homing factors via chemical mediators can result in recruitment of cells to the microenvironment with subsequent improvement in angiogenesis., (Copyright © 2017 John Wiley & Sons, Ltd.)

The immobilization of bioactive peptides as key molecules in numerous biological and physiological functions holds promise for designing advanced biomaterials. Graphene and its derivatives, having unique physicochemical properties, have brought considerable attention in the life sciences. In this regard, the chemical manipulation of the graphene surface with bioactive peptides opens a new horizon to design bioactive materials for a variety of future nanobiotechnologies. In this study, the first straightforward strategy for the covalent immobilization of the cell-adhesion peptide onto the graphene surface based on the Ugi four-component assembly process (Ugi 4-CAP) will be presented. The modified adhesion motif peptide, as an amine component in the presence of formaldehyde, cyclohexylisocyanide and carboxylated-graphene (G-COOH), was adopted in a four component reaction to fabricate a peptide-graphene (Peptide-G) biomaterial in water as a green solvent at an ambient temperature. The amino functional groups corresponded to the modified adhesion motif peptide and were immobilized onto the graphene sheets, which were quantified by the Kaiser test. The sheets were characterized by further analyses with FT-IR, AFM, UV-vis, Raman and thermogravimetric analyses. The Peptide-G biomaterial showed excellent biocompatibility. In addition, the Peptide-G treated surface, due to the presence of RGD on the surface of the graphene, significantly accelerated the proliferation of human mesenchymal stem cells (hMSCs) at a better rate regarding the tissue plate., (Copyright © 2017. Published by Elsevier B.V.)

The inflammatory reaction around the implant after implant placement is important not only for osseointegration but also for long-term implant survivals. In our study, GL13K, an antimicrobial peptide, was immobilized onto titanium surfaces to improve its anti-inflammatory properties. The method of silanization was used to immobilize the GL13K, which was confirmed by X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, water contact angle measurement. DAPI fluorescence staining and Cell Counting Kit-8 (CCK-8) were used to measure the cell attachment and cell viability of the RAW264.7, which indicated a good cytocompatibility. Cellular morphology of RAW264.7 on modified surfaces showed less cell pseudopod. ELISA and qRT-PCR were performed to measure the inflammatory activity of the modified titanium surfaces. The secretion levels of pro-inflammatory cytokines interleukin (IL)-1β, tumor necrosis factor-alpha (TNF-α) and inducible nitric oxide synthase (iNOS) were downregulated at 12h, 24h, and 48h, while the anti-inflammatory cytokines IL-10 and arginase were upregulated at 12h, 24h, and 48h. All results indicate that the GL13K-coated titanium surfaces make the inflammatory process towards a less pro-inflammatory, which may promote the process of osseointegration., (Copyright © 2017. Published by Elsevier B.V.)

Porous titanium (Ti) scaffolds are widely used for bone repair because of their good biocompatibility, mechanical properties, and corrosion resistance. However, pristine Ti scaffolds are bioinert and unable to induce bone regeneration. In this study, chitosan coated bovine serum albumin nanoparticles (CBSA NPs) and oxidized alginate (OSA) were in a layer-by-layer (LbL) manner on Ti scaffolds. The LbL film possessed micro/nano-hierarchical architectures, has the features of nanostructures, and possesses abundant functional groups from CBSA NPs and OSA to improve the surface biocompatibility and biofunctionality of Ti scaffolds. These groups provide active sites for stable and efficient immobilization of bone morphogenic protein-2 (BMP2) through chemical and physical interactions without compromising its bioactivity. The synergistic effect of the hierarchical structure of assembled films and immobilized BMP2 on the scaffold improves cell adhesion, proliferation, and induces osteogenic differentiation of bone marrow stromal cells in vitro. Moreover, this modification also enhances ectopic bone formation bone. Furthermore, grafting of vancomycin on OSA resulted in good antibacterial activity of Ti scaffolds for prevention of infection during the bone healing process. In summary, this NPs-assembling method is convenient and effective to produce nanostructures and to load growth factors and antibacterial agents into Ti scaffolds for bone tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3482-3492, 2017., (© 2017 Wiley Periodicals, Inc.)