Search

Tissue regeneration within the periodontally involved furcation area is one of the most challenging aspects of periodontal surgery. The aim of this study was to evaluate the additional benefit of leukocyte and platelet-rich fibrin (L-PRF) to autogenous bone grafts (ABGs) in the treatment of mandibular molar degree II furcation involvement, comparing the clinical outcomes with those from open flap debridement (OFD)+ABG and OFD alone treatments.Fifty-four patients, exhibiting one buccal or lingual mandibular molar furcation defect, were randomly assigned to three treatment groups: OFD+ABG+L-PRF (n = 18); OFD+ABG (n = 18); and OFD (n = 18). Clinical (probing depth [PD], horizontal clinical attachment level [HCAL], vertical clinical attachment level [VCAL], gingival recession [GR]) and radiographic (vertical bone level [VBL]) parameters were evaluated at baseline and 6 months after treatment. HCAL change was the primary outcome.No significant differences within each group were reported for GR changes, but statistically significant improvements in HCAL, VCAL, PD, and VBL were observed in all groups, except for VBL in the OFD group. At 6 months, the mean HCAL gain was 2.29 ± 0.18 mm in the OFD+ABG+L-PRF group, which was significantly greater than that in the OFD+ABG (1.61 ± 0.18 mm) and OFD (0.86 ± 0.18 mm) groups. Both OFD+ABG+L-PRF and OFD+ABG therapies produced a significantly greater clinical and radiographic improvement than OFD.The addition of L-PRF to ABG produces a significantly greater HCAL gain and PD reduction as compared with OFD+ABG treatment in mandibular degree II furcation involvements.

Guided implant surgery can enhance implant placement positioning, increasing predictability and decreasing postoperative complications., To date, the best protocol to be used for template realization is still unknown. Thus, the aim herein was to clinically compare the accuracy of two different protocols. A total of 48 implants were divided into Group A (24 implants), in which a stereolithographic template was realized using the digital imaging and communications in medicine (DICOM) data arrived from cone beam computer tomographies (CBCTs) (patients and prothesis alone), and Group B (24 implant), in which a standard intraoral stent with a standardized extraoral support was used for patients’ intraoral impressions and CBCT. The preimplant virtual planning and postsurgery CBCT images of both groups were superimposed, and differences were registered in terms of average deviations at the platform (a) and implant apex (b), mean depth change (c), and angular deviation (d). The results demonstrated that there were no statistically significant differences between groups (p = 0.76) for the parameters measured. However, statistically significant differences (p < 0.05) were found between maxillary and mandible implant surgery, as the latter showed greater accuracy. Additional studies are necessary to further reduce discrepancies between planning and surgical procedures.

The novel Coronavirus Disease 2019 (COVID-19) pandemic has renewed attention to aerosol-generating procedures (AGPs). Dental-care workers are at high risk of contamination by SARS-CoV-2. The aim of this study was to evaluate the efficacy of standard saliva ejectors and natural ventilation in reducing particulate matter (PM) concentration during different routine dental procedures in the pandemic period. The DustTrak monitor was used to measure PM1, PM2.5, PM10, and breathable (&lt, 4 microns) total dust during 14 procedures performed with and without the presence of natural ventilation in a dental unit. Moreover, measurements were performed near the practitioners or near the standard saliva ejectors during the different procedures. In the latter condition, reduced levels of PM10 were recorded (82.40 ± 9.65 μg/m3 vs. 50.52 ± 0.23 μg/m3). Moreover, higher levels of PM (53.95 ± 2.29 μg/m3 vs. 27.85 ± 0.14 μg/m3) were produced when the dental unit’s windows were open. At the same time, the total level of PM were higher during scaling than during other procedures (data suggest not to adopt natural ventilation—both window and door opened—during dental procedures). It was also demonstrated that the use of standard saliva ejectors can considerably reduce the total released amount of PM10.

The literature highlights differences in the dental conditions of people with disabilities compared with the general population. The aim of this study was to provide an overview of the dental health of people with disabilities in order to understand if their needs are met and to identify their most critical issues as per dentists. A paper and a Google Form platform were used in conducting a survey in Central Italy (the Abruzzo region), by performing an analysis on different points of view as reported by people with disabilities and dentists. The results showed that only 69.2% of dentists treat persons with disabilities. Of these, 73.5% treat less than 10 patients with physical disabilities per year. However, 54% of dentists do not treat people with cognitive impairment and a poor ability to collaborate during treatment. More than 80% of respondent dentists report that people with disabilities do not have good oral hygiene. On the other hand, 49.1% of people with disabilities (or their caregivers in cases where the patient was unable to answer) report that they rarely or never go to the dental office. Moreover, when they do go, it is mainly for emergencies. Despite this, respondents are well aware of their dental problems. However, they have difficulties in communicating their dental problems to their dentist. The 50% of dentists who treat people with cognitive impairment do not include them in follow-up, while only 20% of these patients reported being regularly recalled. This illustrates the importance of the implementation of follow-up. In addition, training courses could help clinicians to reduce this gap and create barrier-free dental offices.

BACKGROUND Growing evidence shows the efficacy of platelet concentrates in periodontal therapy. This study aimed to demonstrate that an inorganic bovine bone graft (IBB) in combination with a leukocyte and platelet rich fibrin (L-PRF) is non-inferior to a combination with a collagen membrane (CM) when managing unfavorable infrabony defects (IBDs). METHODS All patients exhibited at least one unfavorable IBD; they were randomly assigned to two groups, 31 treated with L-PRF+IBB and 31 with CM+IBB. A clinical and radiographic examination was performed at baseline and 12 months later. Clinical attachment level (CAL), gingival recession (GR), probing depth (PD), and radiographic defect bone level (DBL) post-therapy changes were compared between the two treatments. A non-inferiority margin = 1 mm was set to determine the efficacy of the test treatment (-1 mm for GR); a second non-inferiority margin = 0.5 mm (-0.5 mm for GR) was chosen for clinical relevance. RESULTS Twelve months after surgery a significant improvement of clinical and radiographic parameters was observed at both experimental sites. The 90% confidence intervals of the CM+IBB-L-PRF+IBB mean difference for CAL gain (-0.810 mm [-1.300 to -0.319]) and DBL gain (-0.648 mm [-1.244 to -0.052]) were below the 0.5 mm non-inferiority margin; GR increase (1.284 mm [0.764 to 1.804]) remained above the -0.5 mm, while PD reduction (0.499 mm [0.145 to 0.853]) crossed its 0.5-mm margin. CONCLUSIONS The L-PRF+IBB treatment of unfavorable IBDs offers non-inferior efficacy for CAL gain, showing less GR and more DBL gain too, while for PD reduction it is inferior to the CM+IBB treatment.

The correlation between SARS-CoV-2 and oral manifestations is still controversial. The aim of this observational study was to determine the oral manifestation of the hospitalized patients for COVID-19. A total of 20 patients met the inclusion criteria and gave their signed informed consent. A questionnaire of 32 questions regarding the oral and systemic health condition was administrated to these patients during the convalescence. A descriptive statistic was performed. Data were analysed through the use of &chi, 2 test, to assess the statistical significance. A statistically significant increase of about 30% of reporting xerostomia during hospitalization was observed (p = 0.02). Meanwhile, a decrease of oral hygiene was observed during the hospitalization, even if a non-statistically significant difference was shown between the two study time points (before and after hospitalization). During the hospitalization period, 25% of patients reported impaired taste, 15% burning sensation, and 20% difficulty in swallowing. An interesting result was that among the systemic conditions, hypertension was observed in 39% of patients and mostly in female patients (62.5%). Further studies are necessary to better understand the symptoms of this new virus in order to faster detect its presence in humans. Probably, a multidisciplinary team following the COVID-19 patients could be of key importance in treating this disease.

Xerostomia is a symptom frequently present in patients with type 1 (T1DM) and type 2 diabetes mellitus (T2DM). In the present trial, the activity of an artificial saliva (aldiamed&reg, spray) in comparison to a placebo spray were used to evaluate the xerostomia and the saliva antioxidant capacity (SAT). Sixty patients of both genders with T1DM or T2DM were randomized into two groups of 30 subjects each. The experiment was a double-blind study approved by the Ethics Committee of the &ldquo, G. d&rsquo, Annunzio University&rdquo, of Chieti and Pescara. Moreover, measurements of the stimulated saliva flow rate and the ultrasonography of the submandibular and parotid glands were performed at both the study time points. The results demonstrated statistically significant differences between the treatments in terms of the xerostomia average score. Specifically, the values were at baseline and after 30 days 2.9 &plusmn, 1.31 and 3.0 &plusmn, 1.44 and 1.4 &plusmn, 1.48 and 2.4 &plusmn, 0.99 for aldiamed&reg, spray and the placebo, respectively. Meanwhile, no statistically significant differences were shown between the two groups for the other variables, such as the salivary flow rate, the antioxidant capacity of the saliva, and the ultrasonography of the major salivary glands.

Dentine pretreatment through sandblasting procedures has been widely studied but no curve test results are currently available. Thus, the aim herein was to in vitro compare the adhesive strength in sandblasted or not samples using a universal testing machine. Thirty -two bovine teeth were divided into two groups, namely test (n = 16 bars), sandblasting with aluminum oxide particles (50 &micro, m) was performed before the adhesion procedures), and control (n = 16 bars), where no sandblasting procedure was performed. A bi-material curve test was used to evaluate the characteristics of the dentine pretreatment in terms of tensile stress and fracture strength. A scanning electron microscope (SEM) was used to analyze the fracture topography in the composite, bonding, dentin, and at the relative interfaces. The results demonstrated a statistically significant difference between the two groups in terms of tensile stress at maximum load showing values of 84.300 &plusmn, 51.342 MPa and 35.071 &plusmn, 16.609 MPa, respectively for test and control groups (p = 0.033). Moreover, a fracture strength test showed values of 18.543 &plusmn, 8.145 MPa for test and 8.186 &plusmn, 2.833 MPa for control group (p = 0.008). In conclusion, the sandblasting treatment of the dentine significantly influenced the mechanical resistance of the adhesion in this in vitro study.

The COVID-19 pandemic has affected lives and professions worldwide. We aimed to determine the behavior of dentists during the lockdown in Central Italy through an online survey. We demonstrated that the most frequent of urgencies, not otherwise manageable through telemedicine, was dental pulp inflammation. Although a statistically significant increase in the use of some of the personal protective equipment (PPE) from pre to during lockdown was shown, dentists were afraid of being infected during the dental procedures. Moreover, we showed that digital dentistry, telemedicine, use of the rubber dam, distancing of the appointments and further structural changes at the dental office are necessary to reduce the contagion among dentists and patients. No significant differences were shown between gender.

Xerostomia is a symptom frequently present in patients with type 1 (T1DM) and type 2 diabetes mellitus (T2DM). In the present trial, the activity of an artificial saliva (aldiamed® spray) in comparison to a placebo spray were used to evaluate the xerostomia and the saliva antioxidant capacity (SAT). Sixty patients of both genders with T1DM or T2DM were randomized into two groups of 30 subjects each. The experiment was a double-blind study approved by the Ethics Committee of the “G. d’Annunzio University” of Chieti and Pescara. Moreover, measurements of the stimulated saliva flow rate and the ultrasonography of the submandibular and parotid glands were performed at both the study time points. The results demonstrated statistically significant differences between the treatments in terms of the xerostomia average score. Specifically, the values were at baseline and after 30 days 2.9 ± 1.31 and 3.0 ± 1.44 and 1.4 ± 1.48 and 2.4 ± 0.99 for aldiamed® spray and the placebo, respectively. Meanwhile, no statistically significant differences were shown between the two groups for the other variables, such as the salivary flow rate, the antioxidant capacity of the saliva, and the ultrasonography of the major salivary glands.

Marginal bone loss (MBL) is a key factor in long-term implant success rate. Among the different factors that influence MBL, it is the different implant shoulder designs, such as scalloped or non-scalloped, which have been widely studied on screw retained but not on cemented retained implants. Thus, the aim of the present study was to evaluate the MBL around scalloped and non-scalloped cemented retained dental implants after 4 years of loading, in humans. A total of 15 patients were enrolled in the present study. A radiographic and clinical examination was performed after implant placement (T0) and after 4 years from it (T1). The results demonstrated a differential MBL (T1-T0) of 2.436 &plusmn, 1.103 mm and 1.923 &plusmn, 1.021 mm, respectively for test (scalloped) and control (non-scalloped) groups with a statistically significant difference between them. On the other hand, no statistically significant differences were found between the groups in terms of prosthetic complication and abutment decementation, whilst ceramic crowns chipping was shown in both groups. In conclusion, the use of a scalloped platform did not provide better results on the maintenance of MBL after 4 years follow-up. In this study, this probably was determined by multiple factors, among which was the subcrestal insertion of scalloped implants.

In recent years, Zirconia-reinforced Lithium Silicate ceramic (ZLS), combining lithium-silicate and zirconia features, has shown to have excellent mechanical and aesthetic characteristics. Thus, the aim of this study was to compare the fracture strength of ZLS single crowns cemented with two different cementation techniques. Twenty crowns were realised and cemented on teeth replicas achieved from an extracted premolar human tooth. The samples were divided into two groups of 10 specimens each, Glass-ionomeric cement (GIC) group and Self-Adhesive Resin Cement (ARC) group. The mechanical test was performed using a universal testing machine. The specimens were then evaluated with a scanning electron microscope (SEM) to identify for all crowns and related abutments the pattern of fracture after the breaking point. The data obtained were statistically analysed. The mean fracture toughness values and standard deviations (&plusmn, SD) were 2227 &plusmn, 382 N and 3712 &plusmn, 319 N respectively for GIC and ARC groups. In fact, t-test showed a statistically significant difference between the two groups (p &lt, 0.001). Moreover, the SEM results demonstrated portions of abutments still attached to the crown fragments in the ARC group, whilst these were not present in the GIC group. Within the limitations of this study, these results suggest the use of adhesive cementation for ZLS crowns, which significantly increase the compressive strength of ZLS restorations compared to GIC.