Search

Abstract: The resistance to forming microcracks is a key factor for bone to withstand critical loads without fracturing. In this study, we investigated the initiation and propagation of microcracks in murine cortical bone by combining three-dimensional images from synchrotron radiation-based computed tomography and time-lapsed biomechanical testing to observe microdamage accumulation over time. Furthermore, a novel deformable image registration procedure utilizing digital volume correlation and demons image registration was introduced to compute 3D strain maps allowing characterization of the mechanical environment of the microcracks. The displacement and strain maps were validated in a priori tests. At an image resolution of 740 nm the spatial resolution of the strain maps was 10 μm (MTF), while the errors of the displacements and strains were 130 nm and 0.013, respectively. The strain maps revealed a complex interaction of the propagating microcracks with the bone microstructure. In particular, we could show that osteocyte lacunae play a dual role as stress concentrating features reducing bone strength, while at the same time contributing to the bone toughness by blunting the crack tip. We conclude that time-lapsed biomechanical imaging in combination with three-dimensional strain mapping is suitable for the investigation of crack initiation and propagation in many porous materials under various loading scenarios. [Copyright &y& Elsevier]

Abstract: In order to better understand bone postyield behavior and consequently bone failure behavior, this study aimed first to investigate cortical bone microstructure and second, to relate cortical bone microstructure to microdamage initiation and propagation in C57BL/6 (B6) and C3H/He (C3H) mice; two murine inbred strains known for their differences in bone phenotype. Murine femora of B6 and C3H were loaded axially under compression in a stepwise manner. For each loading step, 3D data sets at a nominal resolution of 700nm were acquired by means of synchrotron radiation-based computed tomography. Cortical bone microstructure was divided into three phases: the canal network, the osteocyte lacunar system, and microdamage. Canal volume density and canal unit volume both correlated highly to crack number density (canal volume density: R 2 =0.64, p <0.005 and canal unit volume: R 2 =0.75, p <0.001). Moreover, the large canal units in C3H bone were responsible for more microdamage accumulation compared to B6 bones. This more pronounced microdamage accumulation due to large intracortical bone voids, which eventually leads to a fatal macrocrack (fracture), represents a potential contributing factor to the higher incidence of bone fractures in the elderly. [Copyright &y& Elsevier]

The article discusses research done on the dependence of endosseous implant anchorage on mechanostructural determinants of peri-implant bone trabeculae. According to study authors, there is imminence to the prevalence of low bone mass in patients receiving endosseous implants. The study used male Sprague-Dawley rats and found that metabolic manipulations affect load-induced strain distribution in implant anchorage apparatus.

Abstract: Synchrotron radiation micro-computed tomography (SRμCT) is a very useful technique when it comes to three-dimensional (3D) imaging of complex internal and external geometries. Being a fully non-destructive technique, SRμCT can be combined with other experiments in situ for functional imaging. We are especially interested in the combination of SRμCT with mechanical testing in order to gain new insights in the failure mechanism of trabecular bone. This interest is motivated by the immense costs in health care due to patients suffering from osteoporosis, a systemic skeletal disease resulting in decreased bone stability and increased fracture risk. To better investigate the different failure mechanisms on the microlevel, we have developed a novel in situ mechanical compression device, capable of exerting both static and dynamic displacements on experimental samples. The device was calibrated for mechanical testing using solid aluminum and bovine trabecular bone samples. To study different failure mechanisms in trabecular bone, we compared a fatigued and a non-fatigued bovine bone sample with respect to failure initiation and propagation. The fatigued sample failed in a burst-like fashion in contrast to the non-fatigued sample, which exhibited a distinct localized failure band. Moreover, microscopic cracks – microcracks and microfractures – were uncovered in a 3D fashion illustrating the failure process in great detail. The majority of these cracks were connected to a bone surface. The data also showed that the classification of microcracks and -fractures from 2D section can sometimes be ambiguous, which is also true for the distinction of diffuse and distinct microdamage. Detailed investigation of the failure mechanism in these samples illustrated that trabecular bone often fails in delamination, providing a mechanism for energy dissipation while conserving trabecular bone architecture. In the future, this will allow an even better understanding of bone mechanics related to its hierarchical structural organization. [Copyright &y& Elsevier]