Search

The effective monitoring of railway facilities is crucial for safety and operational efficiency. This study proposes an enhanced remote monitoring technique for railway facilities, specifically bridges, using satellite radar InSAR (Interferometric Synthetic Aperture Radar) technology. Previous studies faced limitations such as insufficient data points and challenges with topographical and structural variations. Our approach addresses these issues by analysing displacements from 30 images captured by the X-band SAR satellite, TerraSAR-X, over two years. We tested each InSAR parameter to develop an optimal set of parameters, applying the technique to a post-tensioned PSC (pre-stressed concrete) box bridge. Our findings revealed a recurring arch-shaped elevation along the bridge, attributed to temporal changes and long-term deformation. Further analysis showed a strong correlation between this deformation pattern and average surrounding temperature. This indicates that our technique can effectively identify micro-displacements due to temperature changes and structural deformation. Thus, the technique provides a theoretical foundation for improved SAR monitoring of large-scale social overhead capital (SOC) facilities, ensuring efficient maintenance and management.

A quick-hardening track (QHT) was developed by injecting quick-hardening mortar into an existing ballast track to rapidly substitute the ballast track with a slab track, thereby improving maintainability and running safety. QHT tracks on a bridge undergo track–bridge interactions similar to other track systems. This paper presents a model to analyze the interaction between the QHT and the bridge. This model considers the longitudinal resistances of rail fasteners and anchors, as well as the interlayer friction between the track and the bridge. A sequential analysis method was applied to systematically consider such effects, revealing that rail additional stress will be high if the track slips over the bridge for a very low frictional coefficient of 0.1. Furthermore, a track segment without an anchor can slip under train traction load when the frictional coefficient is 0.3 or lower. For low friction cases, low-speed operation is advised to prevent the accumulation of the resulting longitudinal slip displacements of the track. An anchor should be installed immediately after the quick-hardening mortar provides sufficient bearing strength to the anchors. The proposed sequential analysis is useful for determining the critical friction coefficient and appropriate longitudinal resistance of a rail fastener, as well as for verifying track safety.