Search

We demonstrate a film-forming electrolyte additive that stabilises the LNMO cathode/electrolyte interface for rechargeable lithium-ion batteries.

The reinforcement of polymer nanocomposites can be achieved through alignment or percolation of cellulose nanocrystals (CNCs). Here, we compare the efficacy of these reinforcement mechanisms in thermoplastic polyurethane (PU) elastomer nanocomposites containing thermally stable cotton CNCs. CNC alignment was achieved by melt spinning nanocomposite fibers, while a percolating CNC network was generated by solvent casting nanocomposite films with CNC contents up to 20 wt %. While in films both the CNCs and the PU matrix were entirely isotropic at all concentrations as confirmed by wide-angle X-ray scattering and birefringence analysis, the CNCs in the fibers exhibited a preferential orientation, which improved with increasing CNC concentration. Increasing the CNC concentration in the fibers reduces, however, the alignment of the PU chains, resulting in an entirely isotropic PU matrix at high CNC contents. The mechanical properties of films and fibers were evaluated using stress-strain measurements. Nanocomposite fibers with low CNC content exhibited superior stiffness, extensibility, and strength compared to the films, while the films displayed superior mechanical properties at high CNC concentrations. These findings are rationalized using common semiempirical models describing the reinforcing effects of CNC alignment in fibers (Halpin-Tsai) and CNC percolation in films (percolation model). The formation of a percolating CNC network leads to a stronger reinforcement than CNC alignment, as the reinforcing effect of the latter is limited by the comparably low aspect ratio of CNCs extracted from cotton. As a consequence, above the percolation threshold for cotton CNCs, isotropic nanocomposite PU films show a higher stiffness than aligned nanocomposite PU fibers.

Guest Editors Ilja Gunkel, Xiaodan Gu, Jodie Lutkenhaus, Du Yeol Ryu, Jiun-Tai Chen, and Zhiqun Lin introduce the honorary themed collection on the occasion of Prof. Thomas P. Russell's 70th birthday.

The spinel Li4Ti5O12 (LTO) is a promising lithium ion battery anode material with the potential to supplement graphite as an industry standard, but its low electrical conductivity and Li–ion diffusivity need to be overcome. Here, mesoporous LTO microspheres with carbon-coatings were formed by phase separation of a homopolymer from microphase-separated block copolymers of varying molar masses containing sol–gel precursors. Upon heating the composite underwent a sol–gel condensation reaction followed by the eventual pyrolysis of the polymer templates. The optimised mesoporous LTO microspheres demonstrated an excellent electrochemical performance with an excellent specific discharge capacity of 164 mA h g−1, 95% of which was retained after 1000 cycles at a C-rate of 10., The combination of block copolymer self-assembly and polymer phase separation with sol–gel chemistry enables the optimisation of Li4Ti5O12 (LTO) microspheres with size-tuneable carbon-coated mesopores, resulting in excellent electrochemical performance.

Creation of color through photonic morphologies manufactured by molecular self-assembly is a promising approach, but the complexity and lack of robustness of the fabrication processes have limited their technical exploitation. Here, it is shown that photonic spheres with full-color tuning across the entire visible spectrum can be readily and reliably achieved by the emulsification of solutions containing a block copolymer (BCP) and two swelling additives. Solvent diffusion out of the emulsion droplets gives rise to 20-150 µm-sized spheres with an onion-like lamellar morphology. Controlling the lamellar thickness by differential swelling with the two additives enables color tuning of the Bragg interference-based reflection band across the entire visible spectrum. By studying five different systems, a set of important principles for manufacturing photonic colloids is established. Two swelling additives are required, one of which must exhibit strong interactions with one of the BCP blocks. The additives should be chosen to enhance the dielectric contrast, and the formation kinetics of the spheres must be sufficiently slow to enable the emergence of the photonic morphology. The proposed approach is versatile and robust and allows the scalable production of photonic pigments with possible future applications in inks for cosmetics and arts, coatings, and displays.

The structural, thermomechanical, and viscoelastic properties of metallosupramolecular polymers (MSPs) can be controlled through the choice of the multiligand monomer and the nature of the metal sa...

Supramolecular polymers are formed through non-covalent, directional interactions between monomeric building blocks. The assembly of these materials is reversible, which enables functions such as healing, repair, or recycling. However, supramolecular polymers generally fail to match the mechanical properties of conventional commodity plastics. Here we demonstrate how strong, stiff, tough, and healable materials can be accessed through the combination of two metallosupramolecular polymers with complementary mechanical properties that feature the same metal-ligand complex as binding motif. Co-assembly yields materials with micro-phase separated hard and soft domains and the mechanical properties can be tailored by simply varying the ratio of the two constituents. On account of toughening and physical cross-linking effects, this approach affords materials that display higher strength, toughness, or failure strain than either metallosupramolecular polymer alone. The possibility to combine supramolecular building blocks in any ratio further permits access to compositionally graded objects with a spatially modulated mechanical behavior., Reversible assembly of supramolecular polymers renders these materials with healing and recycling properties but mechanical properties are often inferior to those of conventional plastics. Here, the authors demonstrate that strong and tough but healable materials can be accessed through the combination of metallosupramolecular polymers with complementary mechanical properties that feature the same metal-ligand complex as binding motif

We report the electrospinning of mechanically-tunable, cellulose nanocrystal (CNC)-reinforced polyurethanes (PUs). Using high-aspect ratio CNCs from tunicates, the stiffness and strength of electrospun PU/CNC mats are shown to generally increase. Furthermore, by tuning the electrospinning conditions, fibrous PU/CNC mats were created with either aligned or non-aligned fibers, as confirmed by scanning electron microscopy. PU/CNC mats having fibers aligned in the strain direction were stiffer and stronger compared to mats containing non-aligned fibers. Interestingly, fiber alignment was accompanied by an anisotropic orientation of the CNCs, as confirmed by wide-angle X-ray scattering, implying their alignment additionally benefits both stiffness and strength of fibrous PU/CNC nanocomposite mats. These findings suggest that CNC alignment could serve as an additional reinforcement mechanism in the design of stronger fibrous nanocomposite mats.

Dataset containing all the data of the publication "Strong Circular Dichroism in Single Gyroid Optical Metamaterials" published in Advanced Optical Materials.

Over the past two decades, metamaterials have led to an increasing number of biosensing and nanophotonic applications due to the possibility of a careful control of light propagating through subwavelength features. Chiral nanostructures (characterized by the absence of any mirror symmetry), in particular, give rise to unique chiro-optical properties such as circular dichroism and optical activity. Here, we present a gyroid optical metamaterial with a periodicity of 65 nm exhibiting a strong circular dichroism at visible wavelengths. Our bottom-up approach, based on metallic replication of the gyroid morphology in triblock terpolymer films, generates a large area of periodic optical metamaterials. We observe a strong circular dichroism in gold and silver gyroid metamaterials at visible wavelengths. We show that the circular dichroism is inherently linked to the handedness of the gyroid nanostructure, and demonstrate its tuneability. The optical effects are discussed and compared to other existing systems, showing the potential of bottom-up approaches for large-scale circular filters and chiral sensing.

A simple and robust method has been developed for the generation of macroscopically ordered hexagonal arrays from the directed self-assembly (DSA) of cylinder-forming block copolymers (BCPs) based on minimal trench patterns with solvent vapor annealing. The use of minimal trench patterns allows us to probe the guided hexagonal arrays of cylindrical microdomains using grazing incidence small angle X-ray scattering (GISAXS), where the sample stage is rotated on the basis of the six-fold symmetry of a hexagonal system. It is found that the (10) planes of hexagonal arrays of cylindrical microdomains are oriented parallel to the underlying trench direction over macroscopic length scales (∼1 × 1 cm2). However, there are misorientations of the hexagonal arrays with short-range ordering. GISAXS patterns show that the hexagonal arrays on the minimal trench pattern are distorted, deviating from a perfect hexagonal lattice. This distortion has been attributed to the absence of topographic constraints in the unconfined direction on the 1-D minimal trench pattern. Also, the frustration of BCP microdomains, arising from the incommensurability between the trench pitch and natural period of the BCP at the base of the trench, influences the distortion of the hexagonal arrays.

Biological systems are able to control the assembly and positioning of proteins with nanoscale precision, as exemplified by the intricate molecular structures within cell membranes, virus capsids, and collagen matrices. Controlling the assembly of biomolecules is critical for the use of biomaterials in artificial systems such as antibacterial coatings, engineered tissue samples, and implanted medical devices. Furthermore, understanding the dynamics of protein assembly on heterogeneous templates will ultimately enable the control of protein crystallization in general. Here, we show a biomimetic, hierarchical bottom-up approach to direct the self-assembly of crystalline S-layers through nonspecific interactions with nanostructured block copolymer (BCP) thin-film templates. A comparison between physically and chemically patterned BCP substrates shows that chemical heterogeneity is required to confine the adhesion and self-assembly of S-layers to specific BCP domains. Furthermore, we show that this mechanism can be extended to direct the formation of collagen fibers along the principal direction of the underlying BCP substrate. The dynamics of protein self-assembly at the solid-liquid interface are followed using in situ high-resolution atomic force microscopy under continuous flow conditions, allowing the determination of the rate constants of the self-assembly. A pattern of alternating, chemically distinct nanoscale domains drastically increases the rate of self-assembly compared to non-patterned chemically homogeneous substrates.

Solid polymer electrolytes for lithium batteries promise improvements in safety and energy density if their conductivity can be increased. Nanostructured block copolymer electrolytes specifically have the potential to provide both good ionic conductivity and good mechanical properties. This study shows that the previously neglected nanoscale composition of the polymer electrolyte close to the electrode surface has an important effect on impedance measurements, despite its negligible extent compared to the bulk electrolyte. Using standard stainless steel blocking electrodes, the impedance of lithium salt-doped poly(isoprene-b-styrene-b-ethylene oxide) (ISO) exhibited a marked decrease upon thermal processing of the electrolyte. In contrast, covering the electrode surface with a low molecular weight poly(ethylene oxide) (PEO) brush resulted in higher and more reproducible conductivity values, which were insensitive to the thermal history of the device. A qualitative model of this effect is based on the hypothesis that ISO surface reconstruction at the different electrode surfaces leads to a change in the electrostatic double layer, affecting electrochemical impedance spectroscopy measurements. As a main result, PEO-brush modification of electrode surfaces is beneficial for the robust electrolyte performance of PEO-containing block-copolymers and may be crucial for their accurate characterization and use in Li-ion batteries.

© 2018 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim Optical metamaterials offer the tantalizing possibility of creating extraordinary optical properties through the careful design and arrangement of subwavelength structural units. Gyroid-structured optical metamaterials possess a chiral, cubic, and triply periodic bulk morphology that exhibits a redshifted effective plasma frequency. They also exhibit a strong linear dichroism, the origin of which is not yet understood. Here, the interaction of light with gold gyroid optical metamaterials is studied and a strong correlation between the surface morphology and its linear dichroism is found. The termination of the gyroid surface breaks the cubic symmetry of the bulk lattice and gives rise to the observed wavelength- and polarization-dependent reflection. The results show that light couples into both localized and propagating plasmon modes associated with anisotropic surface protrusions and the gaps between such protrusions. The localized surface modes give rise to the anisotropic optical response, creating the linear dichroism. Simulated reflection spectra are highly sensitive to minute details of these surface terminations, down to the nanometer level, and can be understood with analogy to the optical properties of a 2D anisotropic metasurface atop a 3D isotropic metamaterial. This pronounced sensitivity to the subwavelength surface morphology has significant consequences for both the design and application of optical metamaterials.

Real-time grazing-incidence small-angle X-ray scattering (GISAXS) experiments were used to study the self-assembly of cylinder-forming block copolymers (BCPs) in thin films during thermal annealing and solvent vapor annealing. BCP thin films were annealed in near-neutral solvent vapor for solvent vapor annealing and on a hot plate under an inert gas atmosphere for thermal annealing. The initially ordered films were heated or swollen to induce an order–disorder transition (ODT) and then cooled or the solvent was removed, respectively. The domain spacings of BCPs as determined from in situ GISAXS measurements during solvent removal and cooling were analyzed with respect to the polymer concentration and the reciprocal temperature. Close to the ODT the domain spacing was found to be nearly identical for thermal and solvent vapor annealing. At lower solvent concentrations ϕ and lower temperatures T, the domain spacing was found to increase for both thermal and solvent vapor annealing until structural reorganiz...

Optical metamaterials offer the possibility of accessing extraordinary optical properties through the specific arrangement of their sub-wavelength structural units. A particularly interesting morphology is the gyroid due to its chiral, cubic, and triply-periodic geometry. Gyroid optical metamaterials with unit cell sizes of tens of nanometers can be conveniently fabricated via electrodeposition of gold into voided, self-assembled polymer templates. This bottom-up self-assembly approach allows the fabrication of gold gyroids with different orientations and unit cell sizes. We show here that gyroid metamaterials exhibit a depressed effective plasma frequency, as well as a circular and linear dichroism, a surprising result given the underlying cubic symmetry. By combining electron microscopy and optical goniometry, we show that the reflection of light from gold gyroids is strongly polarization-dependent, and is sensitive to the orientation of the gyroid and the terminations of its top surface. Our results highlight the influence of orientation and surface terminations on the optical properties of metamaterials, and have significant consequences for both their design and applications.

The efficacy with which solvent vapor annealing (SVA) can control block copolymer self-assembly has so far been demonstrated primarily for the simplest class of copolymer, the linear diblock copolymer. Adding a third distinct block-thereby creating a triblock terpolymer-not only provides convenient access to complex continuous network morphologies, particularly the gyroid phases, but also opens up a route toward the fabrication of novel nanoscale devices such as optical metamaterials. Such applications, however, require the generation of well-ordered 3D continuous networks, which in turn requires a detailed understanding of the SVA process in terpolymer network morphologies. Here, in situ grazing-incidence small-angle X-ray scattering (GISAXS) is employed to study the self-assembly of a gyroid-forming triblock terpolymer during SVA, revealing the effects of several key SVA parameters on the morphology, lateral order, and, in particular, its preservation in the dried film. The robustness of the terpolymer gyroid morphology is a key requirement for successful SVA, allowing the exploration of annealing parameters which may enable the generation of films with long-range order, e.g., for optical metamaterial applications.

Block copolymer (BCP) self-assembly is a promising route to manufacture functional nanomaterials for applications from nanolithography to optical metamaterials. Self-assembled cubic morphologies cannot, however, be conveniently optically characterized in the lab due to their structural isotropy. Here, the aligned crystallization behavior of a semicrystalline-amorphous polyisoprene-b-polystyrene-b-poly(ethylene oxide) (ISO) triblock terpolymer was utilized to visualize the grain structure of the cubic microphase-separated morphology. Upon quenching from a solvent swollen state, ISO first self-assembles into an alternating gyroid morphology, in the confinement of which the PEO crystallizes preferentially along the least tortuous pathways of the single gyroid morphology with grain sizes of hundreds of micrometers. Strikingly, the resulting anisotropic alignment of PEO crystallites gives rise to a unique optical birefringence of the alternating gyroid domains, which allows imaging of the self-assembled grain structure by optical microscopy alone. This study provides insight into polymer crystallization within a tortuous three-dimensional network and establishes a useful method for the optical visualization of cubic BCP morphologies that serve as functional nanomaterial templates.

Various embodiments of the invention demonstrate selective laser ablation processes as a means to create a block copolymer derived lithographic pattern through the selective removal of one block. Three block copolymer systems described PS-b-PHOST, P2VP-b-PS-b-P2VP, and P2VP-b-PS-b-P2VP where the P2VP is infiltrated with platinum Pt. The selective laser ablation processes on block copolymers offers an alternative to plasma etching when plasma etching is not effective.

We have investigated PLLA crystallization in lamellae-forming PS-b-PLLA confined to straight cylindrical nanopores under weak confinement (nanopore diameter D / equilibrium PS-b-PLLA period L0 larger than 4.8). Molten PS-b-PLLA predominantly forms concentric lamellae along the nanopores, but intertwined helices occur even for D/L0 = 7.3. Quenching PS-b-PLLA melts below TG(PS) results in PLLA cold crystallization strictly confined by the vitrified PS domains. Above TG(PS), PLLA crystallization is templated by the PS-b-PLLA melt domain structure in the nanopore centers, while adsorption on the nanopore walls stabilizes the outermost cylindrical PS-b-PLLA shell. In between, the nanoscopic PS-b-PLLA melt domain structure apparently ripens to reduce frustrations transmitted from the outermost immobilized PS-b-PLLA layer. The onset of PLLA crystallization catalyzes the ripening while transient ripening states are arrested by advancing PLLA crystallization. Certain helical structure motifs persist PLLA crystallization even if PS is soft. The direction of fastest PLLA crystal growth is preferentially aligned with the nanopore axes to the same degree as for PLLA homopolymer, independent of whether PS is vitreous or soft.

Mesoporous titania microspheres (MTMs) have been employed in many applications, including (photo)catalysis as well as energy conversion and storage. Their morphology offers a hierarchical structural design motif that lends itself to being incorporated into established large-scale fabrication processes. Despite the fact that device performance hinges on the precise morphological characteristics of these materials, control over the detailed mesopore structure and the tunability of the pore size remains a challenge. Especially the accessibility of a wide range of mesopore sizes by the same synthesis method is desirable, as this would allow for a comparative study of the relationship between structural features and performance. Here, we report a method that combines sol-gel chemistry with polymer micro- and macrophase separation to synthesize porous titania spheres with diameters in the micrometer range. The as-prepared MTMs exhibit well-defined, accessible porosities with mesopore sizes adjustable by the choice of the polymers. When applied as an anode material in lithium ion batteries (LIBs), the MTMs demonstrate excellent performance. The influence of the pore size and an in situ carbon coating on charge transport and storage is examined, providing important insights for the optimization of structured titania anodes in LIBs. Our synthesis strategy presents a facile one-pot approach that can be applied to different structure-directing agents and inorganic materials, thus further extending its scope of application.

Organic–inorganic perovskites are semiconductors used for applications in optoelectronics and photovoltaics. Micron and submicron perovskite patterns have been explored in semitransparent photovoltaic and lasing applications. In this work, we show that a polymeric medium can be used to create a patterned perovskite, by using a novel and inexpensive approach.

The ordering processes of PS-b-P2VP block copolymer thin films with different processing histories were studied during solvent vapor annealing by in situ grazing incidence small-angle X-ray scattering (GISAXS). We compared cylinder-forming PS-b-P2VP thin films with 34 kg/mol molecular weight that were prepared in three different ways: spin coating, spin coating and subsequent solvent vapor annealing where the solvent vapor was removed instantaneously, and spin coating and subsequent solvent vapor annealing where the solvent vapor was removed slowly. Block copolymer thin films retained the morphology resulting from the different “processing histories” at smaller swelling ratios. This processing history was erased when the samples reached a higher swelling ratio (~1.4). After the solvent was slowly removed from the swollen film, the surface morphology was characterized by ex situ AFM. All samples showed the same morphology after solvent annealing regardless of the initial morphology, indicating the morphology of solvent annealed samples is determined by the polymer concentration in the swollen film and the solvent vapor removal rate, but not the processing history.

High-aspect-ratio sub-15-nm silicon trenches are fabricated directly from plasma etching of a block copolymer mask. A novel method that combines a block copolymer reconstruction process and reactive ion etching is used to make the polymer mask. Silicon trenches are characterized by various methods and used as a master for subsequent imprinting of different materials. Silicon nanoholes are generated from a block copolymer with cylindrical microdomains oriented normal to the surface.

We present temperature-dependent SAXS measurements on symmetric poly(styrene-block-2-vinylpyridine) and poly(styrene-block-ethylene oxide) with added lithium triflate. Salt doping led to a strong increase of the order–disorder transition temperatures and increased domain spacings. Based on a detailed analysis of the scattering data close to the order–disorder transition, three contributions to the structural changes can be distinguished: an increased incompatibility between the different monomers, the additional volume of the added salt, and chain stretching due to coordination between polymer and salt. At the phase transition, i.e. at constant interaction parameter χ, for low concentrations the increase in domain size is quantitatively explained by the volume of the added salt, and at higher concentrations chain stretching sets in. Structural and thermodynamic effects are considerably stronger in PEO than in P2VP.

Supramolecular polyisobutylenes (PIB) bearing mono- and bifunctional chain ends with hydrogen-bonding units were prepared, and their association behavior in the melt state was investigated by dynamic rheology and compared to aggregation in solution, aiming at determining association dynamics in the solid state. A preparation combining living cationic polymerization with either azide/alkyne “click” reactions or nucleophilic substitution reactions enabled a full end group transformation to the final PIB polymers, modified with either thymine or 2,6-diaminotriazine end groups as proven by NMR and MALDI methods with molecular weights of ∼3500 and ∼10 000 g/mol. Stoichiometric mixtures of these polymers bearing specifically interacting thymine/triazine moieties were prepared by solution blending and the temperature-dependent dynamics investigated by rheological measurements. At temperatures of 20−60 °C all samples display strongly thermoreversible aggregation with sheet-type or partially cross-linked structure...

Self-assembling block copolymer films provide access to a variety of different nanostructured patterns in one, two, and three dimensions. However, in the absence of any templating, these nanostructures suffer from defects, often limiting utility. Directed block copolymer self-assembly uses patterned substrates that effectively suppress defect formation and allow the creation of desired patterns. The two main directed self-assembly techniques, chemoepitaxy and graphoepitaxy, employ chemically and topographically patterned substrates, respectively, to direct the block copolymer assembly in thin films. Their successful application in generating defect-free patterns in films of block copolymers exhibiting particular morphologies is summarized in this concept article. The possible role of directed self-assembly in extending nanostructured patterning from two to three dimensions is also discussed.

We have investigated PLLA crystallization in lamellae-forming PS-b-PLLA confined to straight cylindrical nanopores under weak confinement (nanopore diameter D/equilibrium PS-b-PLLA period L0 ≥ 4.8). Molten PS-b-PLLA predominantly forms concentric lamellae along the nanopores, but intertwined helices occur even for D/L0 ≈ 7.3. Quenching PS-b-PLLA melts below TG(PS) results in PLLA cold crystallization strictly confined by the vitrified PS domains. Above TG(PS), PLLA crystallization is templated by the PS-b-PLLA melt domain structure in the nanopore centers, while adsorption on the nanopore walls stabilizes the outermost cylindrical PS-b-PLLA shell. In between, the nanoscopic PS-b-PLLA melt domain structure apparently ripens to reduce frustrations transmitted from the outermost immobilized PS-b-PLLA layer. The onset of PLLA crystallization catalyzes the ripening while transient ripening states are arrested by advancing PLLA crystallization. Certain helical structure motifs persist PLLA crystallization even if PS is soft. The direction of fastest PLLA crystal growth is preferentially aligned with the nanopore axes to the same degree as for PLLA homopolymer, independent of whether PS is vitreous or soft.

We report on the formation of polymer nanofibers and nanotubes by melt infiltration of block copolymers (BCPs) containing poly (norbornene) blocks bearing polar and non-polar moieties synthesized via ring opening metathesis polymerization (ROMP) into Al 2 O 3 porous templates. The effect of pore size of the Al 2 O 3 template and polymer chain length on the formed structure i.e. fibers or hallow tubes is investigated. SEM analysis revealed that a smaller pore size (∼ 1 80 nm) of the Al 2 O 3 template with a BCP of lower molecular weight ( 25 kg/mol) furnishing hollow tubes.

We generalize the Fredrickson-Helfand theory of the microphase separation in symmetric diblock copolymer melts by taking into account the influence of a time-independent homogeneous electric field on the composition fluctuations within the self-consistent Hartree approximation. We predict that electric fields suppress composition fluctuations, and consequently weaken the first-order transition. In the presence of an electric field the critical temperature of the order-disorder transition is shifted towards its mean-field value. The collective structure factor in the disordered phase becomes anisotropic in the presence of the electric field. Fluctuational modulations of the order parameter along the field direction are strongest suppressed. The latter is in accordance with the parallel orientation of the lamellae in the ordered state., 16 pages

The properties of supramolecular polymers in the solid state are strongly dependent on the binding strength of the supramolecular motifs used; however, It has been previously shown that the nanostructure of supramolecular polymers plays an equally important role. Supramolecular polymers are commonly synthesized via end-group functionalization of low-glass transition telechelics with supramolecular units. In these systems, the binding motifs segregate from the soft telechelic backbone and form a hydrogen bonded crystalline hard phase that provides physical cross-links. To date, the reported synthetic approaches do not permit the introduction of a wide variety of supramolecular units with low synthetic effort, which would facilitate studying the structure-property relationships. The use of the Passerini and Ugi multicomponent reactions to synthesize various poly(ethylene-co-butylene) telechelics with diverse amide end-groups is reported. The thermal properties of the supramolecular polymers obtained through their solid-state assembly are investigated and their nanophase- segregation is studied, which is dictated by the end-group volume fraction and the amide–amide hydrogen bonding.

In this work, the influence of carbon nanotubes (CNTs) on the self-assembly of nanocomposite materials made of cylinder-forming polystyrene-block-poly(ethylene- butylene)-block-polystyrene (SEBS) is studied. CNTs are modified with polystyrene (PS) brushes by surface-initiated atom transfer radical polymerization to facilitate both their dispersion and the orientation of neighboring PS domains of the block copolymer (BCP) along modified CNT-PS. Dynamic rheology is utilized to probe the viscoelastic and thermal response of the nanoscopic structure of BCP nanocomposites. The results indicate that nonmodified CNTs increase the BCP microphase separation temperature because of BCP segmental confinement in the existing 3D network formed between CNTs, while the opposite holds for the samples filled with modified CNT-PS. This is explained by severely retarded segmental motion of the matrix chains due to their preferential interactions with the PS chains of the CNT-PS. Moreover, transient viscoelastic analysis reveals that modified CNT-PS have a more pronounced effect on flow-induced BCP structural orientation with much lower structural recovery rate. It is demonstrated that dynamic-mechanical thermal analysis can provide valuable insights in understanding the role of CNT incorporation on the microstructure of BCP nanocomposite samples. Accordingly, the presence of CNT has a significant promoting effect on microstructural development, comparable to that of annealing.

In situ grazing-incidence small-angle X-ray scattering experiments on thin films of block copolymers during annealing in neutral solvent vapors are reported. By removing the solvent in a controlled manner, the period of the microphase separated morphology is found to increase with increasing block copolymer concentration in a power law manner with an exponent ∼ 2/3. By venting the systems at different rates during the solvent removal process, kinetically arresting the system, the period of the microphase separated morphology in the dried film can be varied.

A few percent of transition metals impregnated inside some biological organisms in nature remarkably improve such organisms' mechanical stability. Although the lure to emulate them for development of new biomimetic structural materials has been great, the practical advances have been rare because of the lack of proper synthetic approaches. Multiple pulsed vapor phase infiltration proved successful for the preparation of such transition metal impregnated materials with highly improved mechanical stability. The artificially infiltrated metals (Al, Ti, or Zn) from gas phase lead to around 3 times increase of toughness (in terms of breaking energy) of natural collagen in a dried state. In addition, the infiltrated metals apparently induce considerable crystallographic changes in the natural collagen structures. This infiltration approach can be used as guide for the synthesis of bioinspired structural materials related to metal infiltration.

To meet the increasing demand for patterning smaller feature sizes, a lithography technique is required with the ability to pattern sub-20 nm features. While top-down photolithography is approaching its limit in the continued drive to meet Moore’s law, the use of directed self-assembly (DSA) of block copolymers (BCPs) offers a promising route to meet this challenge in achieving nanometre feature sizes. Recent developments in BCP lithography and in the DSA of BCPs are reviewed. While tremendous advances have been made in this field, there are still hurdles that need to be overcome to realize the full potential of BCPs and their actual use.

International audience; Nanostructured silver stands out among other plasmonic materials because its optical losses are the lowest of all metals. However, nanostructured silver rapidly degrades under ambient conditions, preventing its direct use in most plasmonic applications. Here, a facile and robust method for the preparation of highly stable nanostructured silver morphologies is introduced. 3D nanostructured gyroid networks are fabricated through electrodeposition into voided, self-assembled triblock terpolymer scaffolds. Exposure to an argon plasma degraded the polymer and stabilized the silver nanostructure for many weeks, even in high humidity and under high-dose UV irradiation. This stabilization protocol enables the robust manufacture of low-loss silver nanostructures for a wide range of plasmonic applications.