Search

Concrete structure has been widely used in bridges and highways, however, its performance will be deteriorated after long term serving or suffering disaster. Since fast neutron has strong transmission ability and is sensitive to water content in the concrete structure, it can provide an effective probe to inspect the inner structure of concrete with non-destructive way. Thus, we propose a fast neutron imaging and reconstruction system of 3D CT for concrete structure inspection with Riken accelerator-driven compact neutron source (RANS) using a fast neutron pixel-type detector, which has 8×8 pixels. To have a good space resolution on the reconstructed image, a rotation + linear scanning method is devised and is used to collect the projection data from experiment or calculation. In this paper, reconstruction for a concrete object containing both iron bars and acrylic bars for simulation of water has been conducted. As a result, 3D image of 1cm diameter bar is reconstructed by the sparse reconstruction algorithm.

Cold neutrons with energy less than several meV are good probes for material research, and they have been available on large neutron facilities, whereas it is not commonly available on compact accelerator-driven neutron source. RIKEN Accelerator-driven Neutron Source (RANS) is a pulsed neutron facility which provides thermal neutrons and high energy neutrons at several MeV. We started a project to implement a cold neutron moderator for RANS to broaden cold neutrons applications. A cold neutron moderator system with a mesitylene moderator at 20K and a polyethylene pre-moderator at room temperature in the slab geometry was designed for RANS. So far, the thickness of the pre-moderator and mesitylene have been optimized to get the highest cold neutron flux by using a Monte Carlo simulation code, PHITS. Graphite reflector dimensions were also proven to have significant effect to increase the cold neutron intensity.

To meet strong demand for realizing an effective tool to diagnose salt distribution in concrete infrastructures, we have started a development of a new technique using a prompt gamma neutron activation analysis (PGNAA) at the RIKEN accelerator-driven compact neutron source (RANS). So far, by applying PGNAA we have experimentally confirmed that neutrons from RANS can detect small enough amounts of chlorine within the marginal concentration of around 1.2 kg/m3 to involve steel corrosion. In this study, we have proposed two methods to derive the salt depth profile which is critical information of steel corrosion start. The first one utilizes a difference in the intensity ratio of two different γ-ray energies of interest, which is depending on the depth where the neutron capture reaction arises inside the concrete. The second is called the collimator method that measure γ-rays coming through a collimator around detector. Detection of γ-ray associated with 35Cl coming from the assembly of concrete has been also simulated with conditions of neutrons from RANS and a collimator. The feasibility of the method was discussed.

It is proposed that nanosized graphene aggregation could facilitate coherent neutron scattering under particle size conditions similar to nanodiamonds to enhance neutron intensity below cold neutrons. Using the RIKEN accelerator-driven compact neutron source and iMATERIA at J-PARC, we performed neutron measurement experiments, total neutron cross-section and small-angle neutron scattering on nanosized graphene aggregation. For the first time, the measured data revealed that nanosized graphene aggregation increased the total neutron cross-sections and small-angle scattering in the cold neutron energy region. This is most likely due to coherent scattering, resulting in higher neutron intensities, similar to nanodiamonds. [ABSTRACT FROM AUTHOR]

The RANS (RIKEN Accelerator driven Neutron Source), one of compact accelerator neutron sources (CANS), tries to expand its performance by installing a cold neutron which may provide new opportunities in many applications. RANS is a low power CANS with a proton beam of 7 MeV and 100 µA at maximum. A moderator system was constructed based on results of optimization design study with mesitylene. Recently, we have done performance tests aiming at showing characteristics as cold neutron source. Cryogenic mesitylene moderator was installed on a plug with a new target moderator reflector configuration of RANS. Experiment using a gas electron multiplier (GEM) detector was carried out to measure neutron spectra of the cold moderator. This paper describes performance of the cold moderator in terms of 1) Cold neutron gain of optimization design with respect to a polyethylene moderator, 2) Temperature dependency of cold neutron spectrum flux regarding scattering kernel (SK), and 3) comparison between experiment and calculation. A note is given for comparison between calculations with different SKs available. Also, two-dimensional imaging of cold and thermal neutron spectrum flux on the viewed surface is shown with a pinhole slit configuration. [ABSTRACT FROM AUTHOR]

We have started the development of a transportable neutron salt-meter, we call it RANS-μ, combining a 252Cf neutron source and a prompt gamma neutron activation analysis. Trials of chloride detection measurement with RANS-μ were performed outdoor using removed bridges damaged by chloride attack at an outdoor yard in Public Works Research Institute (PWRI) and a test bridge in Fukushima Robot Test Field. For the measurement at PWRI, the results obtained by RANS-μ were compared with those of the automatic potentiometric titration by drilled powder, and then consistent results were obtained. [ABSTRACT FROM AUTHOR]

Double-differential cross-sections of the 9Be(p,xn) reaction are newly evaluated based on the Wakabayashi's function and neutronics analysis up to 12 MeV for a new nuclear data library, JENDL-5. We devoted our efforts especially to the re-optimization of the absolute cross-sections and the interpolation of the neutron energy spectra. Through the comparisons between the thick target yield measurements and Monte-Carlo simulations at different proton energies and neutron emission angles, we conclude that JENDL-5 gives the best evaluation in the world. [ABSTRACT FROM AUTHOR]

We studied the feasibility of a portable salt-meter incorporating a prompt gamma neutron activation analysis with a californium-252 neutron source to meet urgent demands for non-destructive methods without pre-processing in large bulk materials such as concrete structures. This technique is aiming at the chloride ion concentration in concrete structures with a depth profile from the surface to steel bar. From the portability point of view, a californium-252 neutron source is adopted and we have performed a preliminary experiment and simulations with a simple geometry. In this paper, we describe the performances of salt detection sensitivities by applying the prompt gamma neutron activation analysis. [ABSTRACT FROM AUTHOR]