Search

The effect of glucose and the glucose analogues 2-deoxyglucose and alpha-methyl-glucoside on the synthesis and regulation of staphylococcal enterotoxin B was examined. The attenuating effect of glucose on staphylococcal enterotoxin B synthesis was observed. However, when this effect was examined with analogues of glucose, contradictory responses were seen. alpha-Methylglucoside had a slight stimulatory effect on enterotoxin production and other extracellular proteins, whereas 2-deoxyglucose markedly inhibited enterotoxin production. beta-hemolysin and staphylococcal nuclease were also inhibited by 2-deoxy glucose but the synthesis of nuclease could be rescued by the addition of glucose to 2-deoxyglucose-containing cultures. Enterotoxin and beta-hemolysin synthesis were not subject to glucose rescue. The cells used in this study were permeable to cyclic 3',5'-adenosine monophosphate, but the addition of this compound did not reverse glucose repression or 2-deoxyglucose inhibition of enterotoxin B synthesis. We conclude from these data that the regulation of enterotoxin is not under catabolite control as previously reported.

Biophysical and genetic analysis of staphylococcal enterotoxin B (SEB) synthesis in 16 methicillin-resistant (Mecr) Staphylococcus aureus isolates demonstrated that the toxin gene (entB) can occupy either a plasmid or chromosomal locus. Biophysical analysis of the plasmid deoxyribonucleic acid content of these strains by agarose gel electrophoresis revealed the presence of a 1.15-megadalton plasmid in six isolates that appears to contain the entB gene. Genetic manipulation of SEB synthesis by transduction and elimination procedures demonstrated that this plasmid is critical for enterotoxigenesis. Nevertheless, the majority of the Mecr SEB+ isolates (62.5%) analyzed in this investigation were found to lack the 1.15-megadalton plasmid. In at least two of these strains (COL and 57-dk), transduction and elimination procedures showed that entB was chromosomal. Genetic studies involving strains harboring either a plasmid or chromosomal entB gene demonstrated that toxin synthesis was coeliminated with mec. However, analysis of the entB and mec loci by transformation or transduction showed that the genes are not closely linked. On the other hand, transduction of entB, regardless of the donor, was observed when both mec and the Tcr plasmid were jointly cotransduced. This finding suggests that, during transduction, a transient association between entB, mec, and the Tcr plasmid may exist.

A putative precursor to staphylococcal enterotoxin B (SEB) has been identified as a component of purified membranes from Staphylococcus aureus S6. Agarose gel immunodiffusion analysis of the solubilized membranes demonstrated an immunoreactive protein that formed complete lines of identity with purified extracellular SEB. This putative precursor (pSEB) also had a different electrophoretic mobility from that of extracellular SEB when analyzed by immunoelectrophoresis. When membrane proteins from S6 were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and then transferred to nitrocellulose sheets and probed with I-125 labeled, affinity-purified anti-SEB, the pSEB band was identified. The pSEB was approximately 3,500 daltons larger than extracellular SEB. This component was purified by immunoprecipitation and sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Two-dimensional peptide maps of the putative SEB precursor revealed that most of the tryptic peptides were identical to those of mature extracellular SEB. When purified membranes of other SEB+ (DU4916 and 10-275) and SEB- (RN450, RN451, S6R, and FR1100) S. aureus strains were analyzed by the nitrocellulose blot procedure, only the SEB+ strains contained this putative SEB precursor on their membranes.

The genetic locus of staphylococcal enterotoxin B (SEB) was investigated in the Staphylococcus aureus food-poisoning isolates, strains S6 and 277. Direct neutral sucrose gradient centrifugation analysis of sodium dodecyl sulfate-sodium chloride-mediated cleared lysates demonstrated that strain S6 contained a single 37S plasmid. Transductional analysis revealed that the 37S plasmid in S6 encoded for cadmium resistance (Cad) but not SEB. Additionally, elimination of cadmium resistance in S6 provided a plasmid-negative derivative that produced SEB at the same level as the parent. Examination of strain 277 showed two plasmids, a 37S species encoding for penicillin resistance (Penr) and a 21S species containing the gene(s) responsible for tetracycline resistance (Tetr). Elimination of the 37S, penr plasmid in 277 had no effect on SEB production, whereas introduction of the 21S tetr plasmid via transformation into strain 8325 (SEB--) did not confer enterotoxigenesis upon the transformants. The data obtained in this investigation suggest that the SEB gene(s) in these food-poisoning isolates of S. aureus is chromosomal.

Lysogenization by staphylococcal phage L54a induces the loss of lipase (glycerol ester hydrolase) activity in its host Staphylococcus aureus. The attachment site of the bacterial chromosome (attB) for the phage is at the 3' end of the lipase gene, geh. The DNA fragment containing the attB (base pairs 2620-2637 inclusive) site has been sequenced. We have also cloned and determined the nucleotide sequence of the DNA fragments containing the other three attachment sites--i.e., the attP locus on the circularly permuted phage genome and the attL and attR loci at the left and right ends of the prophage in the lysogenized strain. These results reveal that an 18-base-pair core sequence is common to all four att sites. These data indicate that the crossover point must exist within the core sequence and, further, that integration is site- and orientation-specific. We also localized the viral recombinase gene to a 2.1-kilobase DNA segment extending rightward to the attP site. This region was found to be essential for integration of plasmids containing the attP site.

Experiments were performed to further elucidate the genetic mechanisms underlying the synthesis of staphylococcal enterotoxin B (SEB). Our laboratory has previously shown that, in strains of Staphylococcus aureus which harbor a 1.15-megadalton plasmid (pentB or pSN2), the plasmid appears to be required for SEB synthesis; in other S. aureus strains, designated chromosomal SEB producers, this 1.15-megadalton plasmid is conspicuously absent. We report here than in both Bacillus subtilis minicells and a coupled translational assay, pSN2 codes for a polypeptide of 18,000 daltons. This product is not immunologically reactive with purified anti-SEB globulin. Nevertheless, pSN2 is necessary but not sufficient for SEB synthesis in strains which harbor the plasmid. Further, the data provide a reasonable link between plasmid-bearing and chromosomal SEB producers: transformational analysis indicates that both require functions specified (in plasmid-bearing strains) by pSN2 for SEB synthesis. The combined genetic and biochemical data suggest that pSN2 is not the reservoir for the SEB structural gene, but that the pSN2-specific functions required for SEB synthesis are regulatory in nature.

Staphylococcus aureus PS54 harbors two temperate bacteriophages and manifests no lipase activity on egg yolk agar. Curing of one of the resident prophages (L54a) restores lipase activity. To study the mechanism of bacteriophage conversion, the prophage was cured, and the gene encoding lipase activity was cloned into pBR322 in Escherichia coli on a 2.9-kilobase DNA fragment of the chromosome. The fragment was subcloned into a shuttle vector and subsequently transformed into S. aureus and Bacillus subtilis. Lipase activity was expressed in all three genetic backgrounds. Transformation and transductional data indicated that conversion is due to insertional inactivation of the lipase gene. Hybridization analysis with probes made from converting-phage DNA and from the cloned fragment confirmed that the phage insertion site resides within the terminal 0.8 kilobase of the insert.

The gene (entD) encoding staphylococcal enterotoxin D (SED) has been located on a 27.6-kilobase penicillinase plasmid designated pIB485. This plasmid was present in all SED-producing strains tested. The entD gene was cloned on a 2.0-kilobase DNA fragment and was expressed in Escherichia coli. Sequence analysis of this fragment revealed an open reading frame that encoded a 258-amino-acid protein that possessed a 30-amino-acid signal peptide. The 228-amino-acid mature polypeptide had a molecular weight of 26,360 and contained a high degree of sequence similarity to the other staphylococcal enterotoxins. S1 nuclease mapping showed that transcription of entD was initiated 266 nucleotides upstream from the translation start codon. The entD gene was also shown to be activated by the staphylococcal regulatory element known as agr.

We isolated a transposon (Tn4291) that carries the resistance gene(s) for methicillin in a secondary insertion site on the penicillinase plasmid pI524. Transposition of Tn4291 into pI524 occurred during the transduction of the tetracycline resistance plasmid pSN1 from a methicillin-resistant donor into a recipient that carried the mec allele in the primary site on the chromosome. Insertion of Tn4291 caused extensive rearrangement of pI524 and resulted in the formation of a 27.9-kilobase-pair plasmid (pIT103) which coded for resistance to methicillin and cadmium, but not penicillin. Although resistance to methicillin and cadmium were always linked, Tn4291 was stably maintained only in the presence of a chromosomal mec allele, while in its absence the plasmid was unstable and transposition to the primary site occurred. Subsequently, a 20.1-kilobase-pair plasmid, pIT203, was formed which retained cadmium resistance and regained the ability to express beta-lactamase activity.

The DNA encoding the exfoliative toxin A gene (eta) of Staphylococcus aureus was cloned into bacteriophage lambda gt11 and subsequently into plasmid pLI50 on a 1,391-base-pair DNA fragment of the chromosome. Exfoliative toxin A is expressed in the Escherichia coli genetic background, is similar in length to the toxin purified from culture medium, and is biologically active in an animal assay. The nucleotide sequence of the DNA fragment containing the gene was determined. The protein deduced from the nucleotide sequence is a polypeptide of 280 amino acids. The mature protein is 242 amino acids. The DNA sequence of the exfoliative toxin B gene was also determined. Corrections indicate that the amino acid sequence of exfoliative toxin B is in accord with chemical sequence data.

Transduction of plasmid pC194 and bacteriophage phi 11de varied inversely with the multiplicity of infection. As the multiplicity of infection decreased from 10(-1) to 10(-5) PFU/CFU, the transduction frequency of pC194 increased 10(4)-fold; the transduction frequency of phi 11de increased 300-fold with a 100-fold decrease in multiplicity of infection. Physical and genetic analysis of the transduced DNA showed that pC194 resided in the phage particle as a random, circularly permuted linear concatemer. In DNA prepared from phage that cotransduced pC194 and phi 11de, pC194 resided in the transducing phage primarily as a linear multimer of 15.8 kilobases, or about 5.4 pC194 monomers. The pC194 multimer was randomly inserted into the phi 11 genome.

The staphylococcal plasmid phi 11de is capable of transduction in the absence of both a helper bacteriophage and detectable plaque-forming bacteriophage. The mechanism of transfer is distinct from generalized transduction in that it does not transduce chromosomal material and is selective with respect to the plasmid DNA that is transduced. The transductants containing phi 11de have the following characteristics: (i) erythromycin resistance at levels displayed by the donor, (ii) expression of and susceptibility to plasmid incompatibility, (iii) dependence upon the host recombination system during transduction, (iv) complementation of phi 11 mutants, and (v) reactivation of UV-irradiated phage.

Two larger precursors to staphylococcal alpha-toxin were identified and partially characterized. Both precursor proteins were present on the cell membrane at very low levels and appeared to be rapidly processed to the mature form. Dinitrophenol inhibited processing such that the two precursors accumulated in the membranes, whereas little extracellular (mature) alpha-toxin is formed. The peptide maps of the 35S-labeled peptides from extracellular alpha-toxin and the two precursors were almost identical. The larger precursor protein contained four additional peptides and the smaller precursor protein contained three additional peptides not found in the extracellular toxin.

The calculated in vivo polypeptide chain growth rate for Staphylococcus auteus MF-31 grown in nutritionally rich medium assuming all the ribosomes were functional was found to be approximately 16 amino acids/s/ribosome, but decreased to 10.2 amino acids/s/ribosome for cells grown in poor medium. An in vitro analysis revealed that 70S ribosomes isolated from rich medium cells were more active than similar 70S ribosomes derived from cells grown in poor medium. The 30S subunit was found responsible for the increased activity of the rich monosomes, whereas the 50S subunit appeared to be capable of either high or low activity.

Exfoliative toxin type B is produced by bacteriophage group II strains of Staphylococcus aureus and is a causative agent of staphylococcal scalded-skin syndrome. In addition to exfoliative toxin B, most isolates also produce a bacteriocin and are immune to the action of the bacteriocin. These phenotypes, as well as resistance to cadmium, were lost after elimination of a 37.5-kilobase plasmid, pRW001, from S. aureus UT0007. Transduction and transformation showed that pRW001 carries the structural genes for four phenotypic characteristics of S. aureus UT0007: (i) exfoliative toxin B production, (ii) bacteriocin production, (iii) bacteriocin immunity, and (iv) resistance to Cd(NO3)2. The exfoliative toxin B structural gene (etb), which is located on a 1.7-kilobase HindIII fragment of pRW001, was cloned in the plasmid pDH5060 and transformed into phage group III S. aureus RN4220. Transformant clones produced extracellular exfoliative toxin B that was biologically active in the neonatal mouse assay. In the Escherichia coli genetic background, the exfoliative toxin B gene was expressed only after being cloned into the positive selection-expression vector pSCC31. The structural gene for cadmium resistance was also isolated on an HindIII fragment of pRW001 cloned in pDH5060. The loci for the exfoliative toxin B gene and the cadmium resistance gene(s) were identified on a restriction map of plasmid pRW001.

Staphylococcus aureus PS54 manifests no lipase (geh) activity. This is due to the insertion of bacteriophage L54a DNA into the geh structural gene. The nucleotide sequence of this 2,968-base-pair DNA fragment was determined. Lipase deduced from the nucleotide sequence is a polypeptide of 690 amino acids which extends from nucleotide 706 to 2776.

A larger, membrane-bound form of staphylococcal enterotoxin B was shown by in vivo pulse-chase analysis to be the kinetic precursor to extracellular enterotoxin B. Processing of the enterotoxin B precursor molecules can apparently occur either cotranslationally or posttranslationally. Subcellular fractionation of cells revealed that all of the precursor toxin was associated with the membrane fraction. Once processed and released from the membrane, it was transiently associated with the cell wall before being released into the extracellular environment. The cell-wall-associated enterotoxin B was completely resistant to protease treatment and to extraction by high- or low-salt solutions at 0 to 2 degrees C, although it could be easily released from the cell by removal of the cell wall with lysostaphin. These data imply that newly formed enterotoxin B may be temporarily sequestered in specialized regions that require cell wall integrity before being released into the extracellular environment.

Cultures containing mixed flora from raw milk were heated at 62.8 C for 15, 20, 25, and 30 min. Dilutions were filtered through membrane filters, and the filters were incubated on Trypticase soy broth (TSB) and on TSB plus NaCl (TSBS). The TSB count indicated the total population which survived heating and included injured and uninjured cells. The colonies on TSBS indicated the uninjured cells and were marked by perforating the membrane near the colony. This membrane was then transferred to fresh TSB and incubated further. The injured organisms recovered and formed colonies which could be distinguished from previous colonies of uninjured organisms. Transfer counts on TSB were not substantially different from the initial TSB counts at 15, 20, 25, and 30 min of heating.