Search

Predictive performance assays are crucial for the development and approval of nanomedicines and their bioequivalent successors. At present, there are no established compendial methods that provide a reliable standard for comparing and selecting these formulation prototypes, and our understanding of the in vivo release remains still incomplete. Consequently, extensive animal studies, with enhanced analytical resolution for both, released and encapsulated drug, are necessary to assess bioequivalence. This significantly raises the cost and duration of nanomedicine development. This work presents the development of a discriminatory and biopredictive release test method for liposomal prednisolone phosphate. Using model-informed deconvolution, we identified an in vivo target release. The experimental design employed a discrete L-optimal configuration to refine the analytical method and determine the impact of in vitro parameters on the dosage form. A three-point specification evaluated the key phases of in vivo release: early (T-5%), intermediate (T-20%), and late release behavior (T-40%), compared to the in vivo release profile of the reference product, NanoCort®. Various levels of shear responses and the influence of clinically relevant release media compositions were tested. This enabled an assessment of the effect of shear on the release, an essential aspect of their in vivo deformation and release behavior. The type and concentration of proteins in the medium influence liposome release. Fetal bovine serum strongly impacted the discriminatory performance at intermediate shear conditions. The method provided deep insights into the release response of liposomes and offers an interesting workflow for in vitro bioequivalence evaluation. [Display omitted] [ABSTRACT FROM AUTHOR]

Periodontal disease is a multifactorial pathogenic condition involving microbial infection, inflammation, and various systemic complications. Here, a systematic and comprehensive review discussing key-points such as the pros and cons of conventional methods, new advancements, challenges, patents and products, and future prospects is presented. A systematic review process was adopted here by using the following keywords: periodontal diseases, pathogenesis, models, patents, challenges, recent developments, and 3-D printing scaffolds. Search engines used were "google scholar", "web of science", "scopus", and "pubmed", along with textbooks published over the last few decades. A thorough study of the published data rendered an accurate and deep understanding of periodontal diseases, the gap of research so far, and future opportunities. Formulation scientists and doctors need to be interconnected for a better understanding of the disease to prescribe a quality product. Moreover, prime challenges (such as a lack of a vital testing model, scarcity of clinical and preclinical data, products allowing for high drug access to deeper tissue regions for prolonged residence, lack of an international monitoring body, lack of 4D or time controlled scaffolds, and lack of successful AI based tools) exist that must be addressed for designing new quality products. Generally, several products have been commercialized to treat periodontal diseases with certain limitations. Various strategic approaches have been attempted to target certain delivery regions, maximize residence time, improve efficacy, and reduce toxicity. Conclusively, the current review summarizes valuable information for researchers and healthcare professional to treat a wide range of periodontal diseases. [ABSTRACT FROM AUTHOR]

The use of in vitro-in vivo correlation (IVIVC) for extended release oral dosage forms is an important technique that can avoid potential clinical studies. IVIVC has been a topic of discussion over the past two decades since the inception of USFDA guidance. It has been routinely used for biowaivers, establishment of dissolution safe space and clinically relevant dissolution specifications, for supporting site transfers, scale-up and post approval changes. Although conventional or mathematical IVIVC is routinely used, other approach such as mechanistic IVIVC can be of attractive choice as it integrates all the physiological aspects. In the present study, we have performed comparative evaluation of mechanistic and conventional IVIVC for establishment of dissolution safe space using divalproex sodium and tofacitinib extended release formulations as case examples. Conventional IVIVC was established using Phoenix and mechanistic IVIVC was set up using Gastroplus physiologically based biopharmaceutics model (PBBM). Virtual dissolution profiles with varying release rates were constructed around target dissolution profile using Weibull function. After internal and external validation, the virtual dissolution profiles were integrated into mechanistic and conventional IVIVC and safe space was established by absolute error and T/R ratio's methods. The results suggest that mechanistic IVIVC yielded wider safe space as compared to conventional IVIVC. The results suggest that a mechanistic approach of establishing IVIVC may be a flexible approach as it integrates physiological aspects. These findings suggest that mechanistic IVIVC has wider potential as compared to conventional IVIVC to gain wider dissolution safe space and thus can avoid potential clinical studies. [ABSTRACT FROM AUTHOR]

The primary goal of this study was to establish an in vitro-in vivo correlation (IVIVC) for tamoxifen (TAM)- loaded polycaprolactone-chitosan nanospheres. The plasma attention of TAM and time records have been used to calculate the pharmacokinetic parameters. Cmax for the nano spheres stayed determined to be 459.20 ng mL-1, compared to 442.20 ng mL-1 for natural TAM. Furthermore, the Wagner-Nelson technique was employed to compare the drug release profile by determining the in vivo fixation time data. In line with this, a level between the intestinal absorption in rats and the dissolution % for nanospheres loaded with TAM was created. Plotting the share absorbed in vivo vs the share launched in vitro simultaneously is the best way to illustrate a relationship. [ABSTRACT FROM AUTHOR]

In-vitro to in-vivo correlations (IVIVC), relating in-vitro parameters like IC50 to in-vivo drug exposure in plasma and tumour growth, are widely used in oncology for experimental design and dose decisions. However, they lack a deeper understanding of the underlying mechanisms. Our paper therefore focuses on linking empirical IVIVC relations for small-molecule kinase inhibitors with a semi-mechanistic tumour-growth model. We develop an approach incorporating parameters like the compound's peak-trough ratio (PTR), Hill coefficient of in-vitro dose-response curves, and xenograft-specific properties. This leads to formulas for determining efficacious doses for tumor stasis under linear pharmacokinetics equivalent to traditional empirical IVIVC relations, but enabling more systematic analysis. Our findings reveal that in-vivo xenograft-specific parameters, specifically the growth rate (g) and decay rate (d), along with the average exposure, are generally more significant determinants of tumor stasis and effective dose than the compound's peak-trough ratio. However, as the Hill coefficient increases, the dependency of tumor stasis on the PTR becomes more pronounced, indicating that the compound is more influenced by its maximum or trough values rather than the average exposure. Furthermore, we discuss the translation of our method to predict population dose ranges in clinical studies and propose a resistance mechanism that solely relies on specific in-vivo xenograft parameters instead of IC50 exposure coverage. In summary, our study aims to provide a more mechanistic understanding of IVIVC relations, emphasizing the importance of xenograft-specific parameters and PTR on tumor stasis. [ABSTRACT FROM AUTHOR]

Purpose: To revise the IVIVC considering the physiologically sound Finite Absorption Time (F.A.T.) and Finite Dissolution Time (F.D.T.) concepts. Methods: The estimates τ and τd for F.A.T. and F.D.T., respectively are constrained by the inequality τd ≤ τ; their relative magnitude is dependent on drug's BCS classification. A modified Levy plot, which includes the time estimates for τ and τd was developed. IVIVC were also considered in the light of τ and τd estimates. The modified Levy plot of theophylline, a class I drug, coupled with the rapid (30 min) and very rapid (15 min) dissolution time limits showed that drug dissolution/absorption of Class I drugs takes place in less than an hour. We reanalyzed a carbamazepine (Tegretol) bioequivalence study using PBFTPK models to reveal its complex absorption kinetics with two or three stages. Results: The modified Levy plot unveiled the short time span (~ 2 h) of the in vitro dissolution data in comparison with the duration of in vivo dissolution/absorption processes (~ 17 h). Similar results were observed with the modified IVIVC plots. Analysis of another set of carbamazepine data, using PBFTPK models, confirmed a three stages absorption process. Analysis of steady-state (Tegretol) data from a paediatric study using PBFTPK models, revealed a single input stage of duration 3.3 h. The corresponding modified Levy and IVIVC plots were found to be nonlinear. Conclusions: The consideration of Levy plots and IVIVC in the light of the F.A.T. and F.D.T. concepts allows a better physiological insight of the in vitro and in vivo drug dissolution/absorption processes. [ABSTRACT FROM AUTHOR]

The number of modeling and simulation applications, including physiologically based pharmacokinetic (PBPK) models, physiologically based biopharmaceutics modeling (PBBM), and empirical models, has been constantly increasing along with the regulatory acceptance of these methodologies. While aiming at minimizing unnecessary human testing, these methodologies are used today to support the development and approval of novel drug products and generics. Modeling approaches are leveraged today for assessing drug-drug interaction, informing dose adjustments in renally or hepatically impaired patients, perform dose selection in pediatrics and pregnant women and diseased populations, and conduct biopharmaceutics-related assessments such as establish clinically relevant specifications for drug products and achieve quality assurance throughout the product life cycle. In the generics space, PBPK analyses are utilized toward virtual bioequivalence assessments within the scope of alternative bioequivalence approaches, product-specific guidance development, and food effect assessments among others. Case studies highlighting the evolving and expanding role of modeling and simulation approaches within the biopharmaceutics space were presented at the symposium titled "Model Informed Drug Development (MIDD): Role in Dose Selection, Vulnerable Populations, and Biowaivers – Chemical Entities" and Prologue "PBPK/PBBM to inform the Bioequivalence Safe Space, Food Effects, and pH-mediated DDIs" at the American Association of Pharmaceutical Scientists (AAPS) PharmSci 360 Annual Meeting in Boston, MA, on October 16–19, 2022, and are summarized here. [ABSTRACT FROM AUTHOR]

Sirolimus, a potent immunosuppressant, has been demonstrated to have remarkable activity in inhibiting allograft rejection in transplantation. The objective of the study was to fabricate microsponge mini tablets with enhanced solubility and bioavailability. β-Cyclodextrin and NEOCEL C91 were selected to prepare the microsponges (SLM-M) to improve the stability and solubility of sirolimus. The current study involved the quasi emulsion-solvent diffusion technique to design sirolimus-loaded microsponges that were further compressed into mini tablets 4 mm in diameter. Solid-state characterization, dissolution at different pH values, stability, and pharmacokinetic profiles with IVIVC data were analyzed in humans. Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were used to characterize the formulations, and high-performance liquid chromatography (HPLC) was used to assess the drug stability of the compressed microsponge minitablets. The API changed from the crystalline state to an amorphous state, as shown by XRD and DSC. The compressed mini tablets showed a 4-fold enhancement in the drug dissolution profile. A toxicology investigation suggested that mini tablets were safe. In humans, the bioavailability of sirolimus compressed mini tablets from SLM-M was significantly improved. The results suggest that mini tablets prepared with β-cyclodextrin and NEOCEL C91 by a quasi emulsion-solvent diffusion process might be an alternative way to improve the bioavailability of sirolimus. In addition, the manufacturing process is easily scalable for the commercialization of drugs to market.

Complex injectable drug products (CIDPs) have often been developed to modulate the pharmacokinetics along with efficacy for therapeutic agents used for remediation of chronic disorders. The effective development of CIDPs has exhibited complex kinetics associated with multiphasic drug release from the prepared formulations. Consequently, predictability of pharmacokinetic modelling for such CIDPs has been difficult and there is need for advanced complex computational models for the establishment of accurate prediction models for in-vitro-in-vivo correlation (IVIVC). The computational modelling aims at supplementing the existing knowledge with mathematical equations to develop formulation strategies for generation of predictable and discriminatory IVIVC. Such an approach would help in reduction of the burden of effect of hidden factors on preclinical to clinical translations. Computational tools like physiologically based pharmacokinetics (PBPK) modelling have combined physicochemical and physiological properties along with IVIVC characteristics of clinically used formulations. Such techniques have helped in prediction and understanding of variability in pharmacodynamic parameters of potential generic products to clinically used formulations like Doxil®, Ambisome®, Abraxane® in healthy and diseased population using mathematical equations. The current review highlights the important formulation characteristics, in-vitro , preclinical in-vivo aspects which need to be considered while developing a stimulatory predictive PBPK model in establishment of an IVIVC and in-vitro-in-vivo relationship (IVIVR). [Display omitted] • Generic CIDP drug product development has been challenging due to unabridged complex BE studies. • CIDP's exhibit flip-flop pharmacokinetics characterised by multiphasic drug release profiles. • IVIVC presents improved product development having higher predictability for bioequivalence. • Predictive modelling development is based on all factors affecting the in-vivo CIDPs performance. • Governed by different mechanism of dissolution, each CIDP's require customized in silico models. [ABSTRACT FROM AUTHOR]

Subcutaneously administered drugs are growing in popularity for both large and small molecule drugs. However, development of these systems – particularly generics – is slowed due to a lack of formal guidance regarding preclinical testing and in vitro – in vivo correlations (IVIVC). Many of these methods, while appropriate for oral drugs, may not be optimized for the complex injection site physiologies, and release rate and absorption mechanisms of subcutaneous drugs. Current limitations for formulation design and IVIVC can be supported by implementing mechanistic, computational methods. These methods can help to inform drug development by identifying key drug and formulation attributes, and their effects on drug release rates. This perspective, therefore, addresses current guidelines in place for oral IVIVC development, how they may differ for subcutaneously administered compounds, and how modeling and simulation can be implemented to inform design of these products. As such, integration of modeling and simulation with current IVIVC systems can help in driving the development of subcutaneous injectables. [ABSTRACT FROM AUTHOR]

Model informed drug development (MiDD) is useful to predict in vivo exposure of drugs during various stages of the drug development process. This approach employs a variety of quantitative tools to assess the risks during the drug development process. One important tool in the MiDD tool kit is the Physiologically Based Pharmacokinetic Modelling (PBPK). This tool is extensively used to reduce the development cost and to accelerate the access of medicines to the patients. In this work, we provide an overview of PBPK modelling approaches in the generic drug development process, with a special emphasis on the bio-waiver applications. We describe herein approaches and common pitfalls while submitting model based justifications as a response to the regulatory deficiencies during the generic drug development process. With some in-house case studies, we have attempted to provide a clear path for PBPK model based justifications for bio-waivers. With this review, the gap between theoretical knowledge and practical application of modelling and simulation tools for generic drug product development could be potentially reduced. [ABSTRACT FROM AUTHOR]

The purpose of this study was to investigate the applicability of the Gastrointestinal Simulator (GIS), a multi-compartmental dissolution model, to predict the in vivo performance of Biopharmaceutics Classification System (BCS) Class IIa compounds. As the bioavailability enhancement of poorly soluble drugs requires a thorough understanding of the desired formulation, the appropriate in vitro modelling of the absorption mechanism is essential. Four immediate release ibuprofen 200 mg formulations were tested in the GIS using fasted biorelevant media. In addition to the free acid form, ibuprofen was present as sodium and lysine salts in tablets and as a solution in soft-gelatin capsules. In the case of rapid-dissolving formulations, the dissolution results indicated supersaturation in the gastric compartment, which affected the resulting concentrations in the duodenum and the jejunum as well. In addition, a Level A in vitro–in vivo correlation (IVIVC) model was established using published in vivo data, and then the plasma concentration profiles of each formulation were simulated. The predicted pharmacokinetic parameters were consistent with the statistical output of the published clinical study. In conclusion, the GIS method was found to be superior compared to the traditional USP method. In the future, the method can be useful for formulation technologists to find the optimal technique to enhance the bioavailability of poorly soluble acidic drugs. [ABSTRACT FROM AUTHOR]

Understanding and establishing a link between the physicochemical characteristics of nanoparticles (NPs) and their biological interactions poses to be a great challenge in the field of nanotherapeutics. Recent analytical advancements concerning bio-nanointerfaces have accelerated the quest to comprehend the fate of nanocarrier systems in vivo. Scientists have discovered that protein corona, an adsorbed layer of biomolecules on the surface of NPs takes a leading part in interacting with cells and in the cellular uptake process, thereby determining the in vivo behaviour of NPs. Another useful method to assess the in vivo fate of NPs is by performing dissolution testing. This forms the basis for in vitro in vivo correlation (IVIVC), relating in vitro dissolution of NPs and their in vivo properties. Scientists are continuously directing their efforts towards establishing IVIVC for different nanocarrier systems while concurrently gaining insights into protein corona. This review primarily summarizes the importance of protein corona and its interaction with nanoparticles. It also gives an insight into the factors affecting the interaction and various in vitro dissolution media used for varied nanocarrier systems. The article concludes with a discussion of the limitations of IVIVC modelling and its position from a regulatory perspective. The abstract represents how the in vitro (pre-formulation, drug release, dissolution) results of the experiments obtained in the wet labs could be related to their in vivo performance. [Display omitted] [ABSTRACT FROM AUTHOR]

[Display omitted] Biotherapeutics is the fastest growing class of drugs administered by subcutaneous injection. In vitro release testing mimicking physiological conditions at the injection site may guide formulation development and improve biopredictive capabilities. Here, an in vitro release cartridge (IVR cartridge) comprising a porous agarose matrix emulating subcutaneous tissue was explored. The objective was to assess effects of medium composition and incorporation of human serum albumin into the matrix. Drug disappearance was assessed for solution, suspension and in situ precipitating insulin products (Actrapid, Levemir, Tresiba, Mixtard 30, Insulatard, Lantus) using the flow-based cartridge. UV–Vis imaging and light microscopy visualized dissolution, precipitation and albumin binding phenomena at the injection site. Divalent cations present in the release medium resulted in slower insulin disappearance for suspension-based and in situ precipitating insulins. Albumin-binding acylated insulin analogs exhibited rapid disappearance from the cartridge; however, sustained retention was achieved by coupling albumin to the matrix. An in vitro-in vivo relation was established for the non-albumin-binding insulins. The IVR cartridge is flexible with potential in formulation development as shown by the ability to accommodate solutions, suspensions, and in situ forming formulations while tailoring of the system to probe in vivo relevant medium effects and tissue constituent interactions. [ABSTRACT FROM AUTHOR]

Bioavailability of oral drug formulations is strongly dependent on the composition of the gastric and intestinal fluids and hydrodynamic conditions in the gastrointestinal tract. These affect the dissolution behavior of oral formulations and their subsequent absorption to the bloodstream. A detailed characterization of all these factors is almost impossible in an in vivo setting, which necessitates the use of in vitro experiments. However, the drug release/drug solubility information in the media representing the gastrointestinal tract obtained in an in vitro study is typically not directly determined in an in vivo experiment. Instead, it is more convenient to determine in vivo the drug concentration in plasma. In vitro–in vivo correlation (IVIVC) typically refers to mathematical relationships between in vitro dissolution behavior and in vivo drug concentration in plasma. IVIVC may be improved by approaches that better mimic in vivo conditions in an in vitro setting. These include mimicking of drug absorption and the composition and hydrodynamics of the release medium. Artificial gastrointestinal (GI) systems are designed to meet this objective. In this review, we discuss our current understanding of the IVIVC and the experimental approaches to improve the IVIVC. Some ex vivo approaches also fall within the scope of this review. [ABSTRACT FROM AUTHOR]

Despite increased awareness of aldehyde oxidase (AO) as a major drug-metabolising enzyme, predicting the pharmacokinetics of its substrates remains challenging. Several drug candidates have been terminated due to high clearance, which were subsequently discovered to be AO substrates. Even retrospective extrapolation of human clearance, from models more sensitive to AO activity, often resulted in underprediction. The questions of the current work thus were: Is there an acceptable degree of in vitro AO metabolism that does not result in high in vivo human clearance? And, if so, how can this be predicted? We built an in vitro/in vivo correlation using known AO substrates, combining multiple in vitro parameters to calculate the blood metabolic clearance mediated by AO (CLbAO). This value was compared with observed blood clearance (CLb-obs), establishing cut-off CLbAO values, to discriminate between low and high CLb-obs. The model was validated using additional literature compounds, and CLb-obs was predicted in the correct category. This simple, categorical, semi-quantitative yet multi-factorial model is readily applicable in drug discovery. Further, it is valuable for high-clearance compounds, as it predicts the CLb group, rather than an exact CLb value, for the substrates of this poorly-characterised enzyme. [ABSTRACT FROM AUTHOR]

Though oral drug delivery is the most preferred route of administration, there is high drug pharmacokinetic variability associated with the oral route. Change in drug substance particle size distribution, formulation composition, or manufacturing process may impact the dissolution and, hence, the systemic drug absorption in biopharmaceutics classification system class II compounds. In the present research, using a Boehringer Ingelheim investigational drug substance as the model compound, the tiny-TIM in vitro data and in silico pharmacokinetic model were used to establish in vitro–in vivo correlation and to predict the oral bioavailability. The level C in vitro–in vivo correlation between in vivo AUC and in vitro amount dissolved in both fasted and fed states could be established. Furthermore, level A in vitro–in vivo correlation was established between in vivo fraction absorbed and bioaccessibility from tiny-TIM dissolution in both fasted and fed states. Prediction of positive food effect from tiny-TIM dissolution was consistent with conclusion from clinical studies. Such predictive models developed using the minimum clinical data and the in vitro tiny-TIM data have the potential to reduce the animal and human experiments and to expedite the overall drug development process. [ABSTRACT FROM AUTHOR]

The present study evaluated the effect of different configuration setups of the Flow-Through Cell (USP IV) dissolution tester in developing in vitro–in vivo correlation (IVIVC). A Biopharmaceutics Classification System (BCS) Class I Diltiazem (DTZ), formulated in extended-release (ER) gel-matrix system, was employed for this purpose. The study also assessed the validity and predictability of IVIVC employing both deconvolution- and convolution-based approaches. In vitro release was conducted in USP IV as open- or closed-loop setups, while the pharmacokinetic (PK) data were obtained from a previous fasted-state cross-over study conducted on 8 healthy male volunteers, after oral administration of ER matrix tablets against market product (Tildiem Retard® 90 mg). PK parameters (Cmax, AUC0-t and AUC0-∞) were predicted, and compared with actual data to establish the strength of correlation models. Results showed that DTZ release from ER products was influenced by operating the FTC in different configuration-setups, where ≥ 75% of labeled DTZ was released after 6 h and 12 h using the open- and closed-loop settings, respectively. Correlation between fraction-dissolved versus fraction-absorbed for both ER products displayed linear relation upon employing FTC open-loop setup. Convolution-based approach was more discriminative in predicting DTZ in vivo PK parameters with a minimal prediction error, compared to deconvolution-based approach. A successful trial to predict DTZ PKs from individual in vitro data performed in USP IV dissolution model was established, employing convolution technique. Basic principle of the convolution approach provides a simple and practical method for developing IVIVC, hence could be utilized for other BCS Class I extended-release drug products. [ABSTRACT FROM AUTHOR]

In situ forming implants are appealing long-acting dosage forms for both preclinical and clinical applications due to their simple manufacturing process and easy delivery. This study aims to develop extended-release in situ forming solid implants for subcutaneous administration using two types of commercially available triblock poly (lactic-co-glycolic acid)-poly (ethylene glycol)-poly (lactic-co-glycolic acid) (PLGA-PEG-PLGA) polymers, with either an acid or ester end group. Both types of polymers instantly form in situ implants when injected directly into an aqueous medium. The performance of these implants, containing a model compound ketoprofen, was evaluated by comparing the in vitro drug release profiles with the in vivo performance following subcutaneous administration in rats. Analytical characterizations of two representative in situ implants were conducted to understand their structural impact on polymer degradation and drug release. All tested in situ forming implants demonstrated prolonged drug release profiles both in vitro and in vivo. This study illustrates the successful preparation of sustained-release in situ forming implant formulations for ketoprofen using commercially available polymers, with the molecular weight and the end group of the polymers affecting their degradation and the drug release from the in situ formed implants., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2024. Published by Elsevier Inc.)

The proceedings from the 30th August 2023 (Day 2) of the workshop "Physiologically Based Biopharmaceutics Models (PBBM) Best Practices for Drug Product Quality: Regulatory and Industry Perspectives" are provided herein. Day 2 covered PBBM case studies from six regulatory authorities which provided considerations for model verification, validation, and application based on the context of use (COU) of the model. PBBM case studies to define critical material attribute (CMA) specification settings, such as active pharmaceutical ingredient (API) particle size distributions (PSDs) were shared. PBBM case studies to define critical quality attributes (CQAs) such as the dissolution specification setting or to define the bioequivalence safe space were also discussed. Examples of PBBM using the credibility assessment framework, COU and model risk assessment, as well as scientific learnings from PBBM case studies are provided. Breakout session discussions highlighted current trends and barriers to application of PBBMs including: (a) PBBM credibility assessment framework and level of validation, (b) use of disposition parameters in PBBM and points to consider when iv data are not available, (c) conducting virtual bioequivalence trials and dealing with variability, (d) model acceptance criteria, and (e) application of PBBMs for establishing safe space and failure edges.

Oral delivery of potent peptide drugs provides key formulation challenges in the pharmaceutical industry: stability, solubility, and permeability. Intestinal permeation enhancers (PEs) can overcome the low oral bioavailability by improving the drug permeability. Conventional in vitro and ex vivo models for assessing PEs fail to predict efficacy in vivo . Here, we compared Caco-2 cells cultured in the conventional static Transwell model to a commercially available continuous flow microfluidic Gut-on-a-Chip model. We determined baseline permeability of FITC-Dextan 3 kDa (FD3) in Transwell (5.3 ± 0.8 × 10 -8 cm/s) vs Chip (3.2 ± 1.8 × 10 -7 cm/s). We screened the concentration impact of two established PEs sodium caprate and sucrose monolaurate and indicated a requirement for higher enhancer concentration in the Chip model to elicit equivalent efficacy e.g., 10 mM sodium caprate in Transwells vs 25 mM in Chips. Fasted and fed state simulated intestinal fluids (FaSSIF/FeSSIF) were introduced into the Chip and increased basal FD3 permeability by 3-fold and 20-fold, respectively, compared to 4-fold and 4000-fold in Transwells. We assessed the utility of this model to peptides (Insulin and Octreotide) with PEs and observed much more modest permeability enhancement in the Chip model in line with observations in ex vivo and in vivo preclinical models. These data indicate that microfluidic Chip models are well suited to bridge the gap between conventional in vitro and in vivo models.

This Article shares the proceedings from the August 29th, 2023 (day 1) workshop "Physiologically Based Biopharmaceutics Modeling (PBBM) Best Practices for Drug Product Quality: Regulatory and Industry Perspectives". The focus of the day was on model parametrization; regulatory authorities from Canada, the USA, Sweden, Belgium, and Norway presented their views on PBBM case studies submitted by industry members of the IQ consortium. The presentations shared key questions raised by regulators during the mock exercise, regarding the PBBM input parameters and their justification. These presentations also shed light on the regulatory assessment processes, content, and format requirements for future PBBM regulatory submissions. In addition, the day 1 breakout presentations and discussions gave the opportunity to share best practices around key questions faced by scientists when parametrizing PBBMs. Key questions included measurement and integration of drug substance solubility for crystalline vs amorphous drugs; impact of excipients on apparent drug solubility/supersaturation; modeling of acid-base reactions at the surface of the dissolving drug; choice of dissolution methods according to the formulation and drug properties with a view to predict the in vivo performance; mechanistic modeling of in vitro product dissolution data to predict in vivo dissolution for various patient populations/species; best practices for characterization of drug precipitation from simple or complex formulations and integration of the data in PBBM; incorporation of drug permeability into PBBM for various routes of uptake and prediction of permeability along the GI tract.

In vitro‒in vivo correlation (IVIVC) of solid dosage forms should be established basically between in vitro and in vivo dissolution of active pharmaceutical ingredients. Nevertheless, in vivo dissolution profiles have never been accurately portrayed. The current practice of IVIVC has to resort to in vivo absorption fractions (Fa). In this proof-of-concept study, in vivo dissolution of a model poorly water-soluble drug fenofibrate (FNB) was investigated by fluorescence bioimaging. FNB crystals were first labeled by near-infrared fluorophores with aggregation-caused quenching properties. The dyes illuminated FNB crystals but quenched immediately and absolutely once been released into aqueous media, enabling accurate monitoring of residual drug crystals. The linearity established between fluorescence and crystal concentration justified reliable quantification of FNB crystals. In vitro dissolution was first measured following pharmacopoeia monograph protocols with well-documented IVIVC. The synchronicity between fluorescence and in vitro dissolution of FNB supported using fluorescence as a measure for determination of dissolution. In vitro dissolution correlated well with in vivo dissolution, acquired by either live or ex vivo imaging. The newly established IVIVC was further validated by correlating both in vitro and in vivo dissolution with Fa obtained from pharmacokinetic data.

[Display omitted] Orally administered solid drug must dissolve in the gastrointestinal tract before absorption to provide a systemic response. Intestinal solubility is therefore crucial but difficult to measure since human intestinal fluid (HIF) is challenging to obtain, varies between fasted (Fa) and fed (Fe) states and exhibits inter and intra subject variability. A single simulated intestinal fluid (SIF) cannot reflect HIF variability, therefore current approaches are not optimal. In this study we have compared literature Fa/FeHIF drug solubilities to values measured in a novel in vitro simulated nine media system for either the fasted (Fa9SIF) or fed (Fe9SIF) state. The manuscript contains 129 literature sampled human intestinal fluid equilibrium solubility values and 387 simulated intestinal fluid equilibrium solubility values. Statistical comparison does not detect a difference (Fa/Fe9SIF vs Fa/FeHIF), a novel solubility correlation window enclosed 95% of an additional literature Fa/FeHIF data set and solubility behaviour is consistent with previous physicochemical studies. The Fa/Fe9SIF system therefore represents a novel in vitro methodology for bioequivalent intestinal solubility determination. Combined with intestinal permeability this provides an improved, population based, biopharmaceutical assessment that guides formulation development and indicates the presence of food based solubility effects. This transforms predictive ability during drug discovery and development and may represent a methodology applicable to other multicomponent fluids where no single component is responsible for performance. [ABSTRACT FROM AUTHOR]

[Display omitted] Oral delivery is considered the most patient preferred route of drug administration, however, the drug must be sufficiently soluble and permeable to successfully formulate an oral formulation. There have been advancements in the development of more predictive solubility and dissolution tools, but the tools that has been developed for permeability assays have not been validated as extensively as the gold-standard Caco-2 Transwell assay. Here, we evaluated Caco-2 intestinal permeability assay in Transwells and a commercially available microfluidic Chip using 19 representative Biopharmaceutics Classification System (BCS) Class I-IV compounds. For each selected compound, we performed a comprehensive viability test, quantified its apparent permeability (P app), and established an in vitro in vivo correlation (IVIVC) to the human fraction absorbed (f a) in both culture conditions. Permeability differences were observed across the models as demonstrated by antipyrine (Transwell P app : 38.5 ± 6.1 × 10-8 cm/s vs Chip P app : 32.9 ± 11.3 × 10-8 cm/s) and nadolol (Transwell P app : 0.6 ± 0.1 × 10-7 cm/s vs Chip P app : 3 ± 1.2 × 10-7 cm/s). The in vitro in vivo correlation (IVIVC; P app vs. f a) of the Transwell model (r2 = 0.59–0.83) was similar to the Chip model (r2 = 0.41–0.79), highlighting similar levels of predictivity. Comparing to historical data, our Chip P app data was more closely aligned to native tissues assessed in Ussing chambers. This is the first study to comprehensively validate a commercial Gut-on-a-Chip model as a predictive tool for assessing oral absorption to further reduce our reliance on animal models. [ABSTRACT FROM AUTHOR]

The purpose of this study was to investigate the applicability of the Gastrointestinal Simulator (GIS), a multi-compartmental dissolution model, to predict the in vivo performance of Biopharmaceutics Classification System (BCS) Class IIa compounds. As the bioavailability enhancement of poorly soluble drugs requires a thorough understanding of the desired formulation, the appropriate in vitro modelling of the absorption mechanism is essential. Four immediate release ibuprofen 200 mg formulations were tested in the GIS using fasted biorelevant media. In addition to the free acid form, ibuprofen was present as sodium and lysine salts in tablets and as a solution in soft-gelatin capsules. In the case of rapid-dissolving formulations, the dissolution results indicated supersaturation in the gastric compartment, which affected the resulting concentrations in the duodenum and the jejunum as well. In addition, a Level A in vitro–in vivo correlation (IVIVC) model was established using published in vivo data, and then the plasma concentration profiles of each formulation were simulated. The predicted pharmacokinetic parameters were consistent with the statistical output of the published clinical study. In conclusion, the GIS method was found to be superior compared to the traditional USP method. In the future, the method can be useful for formulation technologists to find the optimal technique to enhance the bioavailability of poorly soluble acidic drugs.

Development and optimization of orally administered drug products often require bio-predictive tools to help with informing formulation and manufacturing decisions. Reliable bio-predictive dissolution toolkits not only allow rational development of target formulations without having to conduct excessive in vivo studies but also help in detecting critical material attributes (CMAs), critical formulation variables (CFVs), or critical process parameters (CPPs) that could impact a drug's in vivo performance. To provide early insights for scientists on the development of a bio-predictive method for drug product development, this review summarizes current phase-appropriate bio-predictive dissolution approaches applicable to address typical concerns on solubility-limited absorption, food effect, achlorhydria, development of extended-release formulation, clinically relevant specification, and biowaiver. The selection of an in vitro method which can capture the key rate-limiting step(s) of the in vivo dissolution and/or absorption is considered to have a better chance to produce a meaningful in vitro-in vivo correlation (IVIVC) or in vitro-in vivo relationship (IVIVR). [ABSTRACT FROM AUTHOR]

[Display omitted] • Assessment of the predictivity of standardized ex vivo vs. in vitro permeation studies. • Successful proof of concept for evaluation of oromucosal delivery of propranolol. • Strong multiple level C correlation of permeability to sublingual pharmacokinetics. • Ex vivo – in vivo point-to-point correlation within clinically relevant time period. In preclinical drug development, ex vivo and in vitro permeability studies are a decisive element for specifying subsequent development steps. In this context, reliability, physiological alignment and appropriate in vivo correlation are mandatory for predictivity regarding drug absorption. Especially in oromucosal drug delivery, these prerequisites are not adequately met, which hinders its progressive development and results in the continuous need for animal experiments. To address current limitations, an innovative, standardized, and controlled ex vivo permeation model was applied. It is based on Kerski diffusion cells embedded in automated sampling and coupled to mass spectrometric quantification under physiologically relevant conditions. This study aimed to evaluate the predictivity of the developed model using porcine mucosa (ex vivo) in relation to data of sublingual propranolol absorption (in vivo). In addition, the usefulness of biomimetic barriers (in vitro) as a replacement for porcine mucosa was investigated. Therefore, solubility and permeability studies considering microenvironmental conditions were conducted and achieved good predictivity (R2 = 0.997) for pH-dependent permeability. A multiple level C correlation (R2 ≥ 0.860) between obtained permeability and reported pharmacokinetic animal data (AUC, C max) was revealed. Furthermore, a point-to-point correlation was demonstrated for several sublingual formulations. The successful IVIVC confirms the standardized ex vivo model as a viable alternative to animal testing for estimating the in vivo absorption behavior of oromucosal pharmaceuticals. [ABSTRACT FROM AUTHOR]

Nano drug delivery systems (NDDS) offer promising solution for the translation of future nanomedicines. As bioavailability and therapeutic outcomes can be improved by altering the drug release from these NDDS, it becomes essential to thoroughly understand their drug release kinetics. Moreover, U.S. Food and Drug Administration requires critical evaluation of potential safety, efficacy, and public health impacts of nanomaterials. Spiraling up market share of NDDS has also stimulated the pharmaceutical industry to develop their cost‐effective generic versions after the expiry of patent and associated exclusivity. However, unlike the conventional dosage forms, the in vivo disposition of NDDS is highly intricate and different from their in vitro behavior. Significant challenges exist in the establishment of in vitro–in vivo correlation (IVIVC) due to incomplete understanding of nanoparticles' in vivo biofate and its impact on in vitro experimental protocols. A rational design of dissolution may serve as quality and quantity control tool and help develop a meaningful IVIVC for favorable economic implications. Clinically relevant drug product specifications (critical quality attributes) can be identified by establishing a link between in vitro performance and in vivo exposure. In vitro dissolution may also play a pivotal role to understand the dissolution‐mediated clearance and safety of NDDS. Prevalent in vitro dissolution methods for NDDS and their limitations are discussed in this review, among which USP 4 is gaining more interest recently. Researchers are working diligently to develop biorelevant in vitro release assays to ensure optimal therapeutic performance of generic versions of these NDDS. This article focuses on these studies and presents important considerations for the future development of clinically relevant in vitro release methods. This article is categorized under:Toxicology and Regulatory Issues in Nanomedicine > Regulatory and Policy Issues in Nanomedicine [ABSTRACT FROM AUTHOR]

There has been a renewed interest in therapeutic small interfering RNAs (siRNAs) over the past few years. This is particularly the result of successful and efficient delivery of N-acetylgalactosamine (GalNAc)-conjugated siRNAs to the liver. In general, the lead selection process for siRNA drugs is faster and more straightforward than traditional small molecules. Nevertheless, many siRNAs of different sequences and chemical modification patterns must still be evaluated before arriving at a final candidate. One of the major difficulties in streamlining this workflow is the well-known phenomenon that the in vitro data obtained from oligonucleotides transfected into cells are not directly predictive of their in vivo activity. Consequently, all oligonucleotides with some degree of in vitro activity are typically screened in vivo before final lead selection. Here, we demonstrate that the stability of liver-targeting GalNAc-conjugated siRNAs in a mouse liver homogenate shows an acceptable correlation to their in vivo target knockdown efficacy. Therefore, we suggest the incorporation of an in vitro liver homogenate stability assay during the lead optimization process for siRNAs. The addition of this assay to a flow scheme may decrease the need for animal studies, and it could bring cost savings and increase efficiency in siRNA drug development.

A dissolution test for mianserin hydrochloride in coated tablets containing 30 mg was developed and validated using a fast ultraviolet spectrophotometric method. The appropriate conditions were determinate after testing sink conditions, agitation spped and dissolution medium. The sink conditions tested showed that mianserin hydrochloride was soluble in 0.01 and 0.1 M hydrochloric acid (HCl), acetate buffer pH 4.1 and 5.0 and phosphate buffer pH 6.8. Then, dissolution tests were performed to investigate the drug release in each medium. Optimal conditions to carry out the dissolution test were 900 mL 0.1 M HCl and USP apparatus 2 (paddle) at 50 rpm stirring speed. The quantification method was also adapted and validated. The UV method showed specificity, linearity, precision and accuracy. The in vitro dissolution test can be used to evaluate the drug release profile and the data was used as an aid to establish a possible correlation with in vivo data.

Researchers can achieve rapid drug production by discovering a mathematical link between bioavailability and dissolution testing that leads to the principle of in vitro - in vivo correlation (IVIVC). IVIVC is a mathematical model which from its in vitro output can be used to estimate in vivo action. Level A correlation is widely recognized by the regulatory agencies among all the five stages of correlation. IVIVC's suitability is demonstrated by the Biopharmaceutical Classification System (BCS). In the estimation of correlations, dissolution process design plays a central role. Other important parameters in the IVIVC analysis are the qualification of the apparatus and guidelines. During the production of IVIVC, several variables, such as first pass effect, stereochemistry, should be considered. Thus, the need for a method to compare in vitro and in vivo drug release data reliably has increased tremendously. Such an instrument shortens the time of drug growth, saves money and contributes to improved product quality. Increased IVIVC creation activity demonstrates the importance of IVIVCs to the pharmaceutical business. In the production of new pharmaceuticals, IVIVC can be used to minimize the number of human studies during the development of formulation, as the primary objective of IVIVC is to act as a replacement for bioavailability in vivo and to help bio waivers. The usage of dissolution encourages and/or validates methods and configurations for requirements. This is because in vivo importance of in vitro dissolution specifications is included in the IVIVC. Research is based on new oral dosage forms in the current scenario, where awareness of IVIVC is of vital importance. IVIVC implementations vary from drug and product production to improvements in their scale-up and post-approval. Therefore, in drug production, IVIVC should be used as an effective tool

Generic drug development is a complex process that involves development of formulation similar to reference product. Because of the complexity associated with generic drug development, many regulatory agencies have come up with various guidelines. Out of many guidelines, the biopharmaceutics classification system that was introduced in 1995 based on aqueous solubility and permeability helped many pharmaceutical scientists across the globe to utilize the tool for formulation development, waiver of in vivo studies. Later on in vitro guidelines based on dissolution and in vitroin vivo correlation were introduced by many regulatory agencies with an intent to reduce number of in vivo human testing thereby facilitating shorter development time and faster approvals and launch. Most recently, understanding the importance in silico approaches such as physiologically based pharmacokinetic modelling, regulatory agencies such as United States Food and Drug Administration (USFDA) and European Middle East and Africa (EMA) came up with modelling guidance documents. Even though consensus exists between guidance documents from various regulatory agencies, still there are many minor to major differences exists between these guidance documents that needs to be considered while submitting a generic drug application. This review aims to compare all the in vitro and in silico guidance documents from major regulatory agencies with emphasis on latest trends and technologies combined with regulatory acceptability with an intention to harmonize regulations. Guidance documents from major regulatory agencies such as USFDA, EMA, World Health Organization, International Council for Harmonization and other emerging markets were compared. Similarities &differences among these guidance documents are critically reviewed to provide the reader a detailed overview of these guidance documents at one place. [ABSTRACT FROM AUTHOR]

[Display omitted] The BBB is a protective entity that prevents external substances from reaching the CNS but it also hinders the delivery of drugs into the brain when they are needed. The main objective of this work was to improve a previously proposed in vitro cell-based model by using a more physiological cell line (hCMEC/D3) to predict the main pharmacokinetic parameters that describe the access and distribution of drugs in the CNS: Kp uu,brain , f u,plasma , f u,brain and V u,brain. The hCMEC/D3 permeability of seven drugs was studied in transwell systems under different conditions (standard, modified with albumin and modified with brain homogenate). From the permeability coefficients of those experiments, the parameters mentioned above were calculated and four linear IVIVCs were established. The best ones were those that relate the in vitro and in vivo V u,brain and f u,brain (r2 = 0.961 and r2 = 0.940) which represent the binding rate of a substance to the brain tissue, evidencing the importance of using brain homogenate to mimic brain tissue when an in vitro brain permeability assay is done. This methodology could be a high-throughput screening tool in drug development to select the CNS promising drugs in three different in vitro BBB models (hCMEC/D3, MDCK and MDCK-MDR1). [ABSTRACT FROM AUTHOR]

Literature relevant to assessing whether BCS-based biowaivers can be applied to immediate release (IR) solid oral dosage forms containing carbamazepine as the single active pharmaceutical ingredient are reviewed. Carbamazepine, which is used for the prophylactic therapy of epilepsy, is a non-ionizable drug that cannot be considered "highly soluble" across the range of pH values usually encountered in the upper gastrointestinal tract. Furthermore, evidence in the open literature suggests that carbamazepine is a BCS Class 2 drug. Nevertheless, the oral absolute bioavailability of carbamazepine lies between 70 and 78% and both in vivo and in vitro data support the classification of carbamazepine as a highly permeable drug. Since the therapeutic and toxic plasma level ranges overlap, carbamazepine is considered to have a narrow therapeutic index. For these reasons, a BCS based biowaiver for IR tablets of carbamazepine cannot be recommended. Interestingly, in nine out of ten studies, USP dissolution conditions (900 mL water with 1% SLS, paddle, 75 rpm) appropriately discriminated among bioinequivalent products and this may be a way forward to predicting whether a given formulation will be bioequivalent to the comparator product. [ABSTRACT FROM AUTHOR]

To perform the solid-state characterization and the in vitro-in vivo correlation (IVIVC) of three batches of efavirenz (EFV) active pharmaceutical ingredients. EFV is an effective anti-HIV drug. Due to the poor aqueous solubility, the rate and extent of EFV absorption deeply depend on its dissolution characteristics. Thermal analyses, x-ray diffraction, and particle size distribution were performed. The saturation solubility and dissolution profiles were assessed in 0.5% (w/v) sodium lauryl sulfate (SLS), fasted-state simulated intestinal fluid (FaSSIF), and fed-state simulated intestinal fluid (FeSSIF) using a flow-through cell. Each batch was orally administered to Wistar rats and the pharmacokinetic parameters were correlated with those obtained from in vitro dissolution. All batches of EFV consisted polymorph I. EFV-A presented the lowest particle size distribution [d(v,0.5) = 197.8 µm; d(v,0.9) = 444.6 µm] followed by EFV-B [d(v,0.5) = 223.9 µm; d(v,0.9) = 481.1 µm], and EFV-C [d(v,0.5) = 240.8 µm; d(v,0.9) = 497.3 µm]. The saturated solubility in FaSSIF was 36% and 40% of that in FeSSIF and SLS, respectively. EFV-A presented the fastest rate and largest extension of dissolution than EFV-B and C (79.15%, 69.93% and 54.22%, respectively, as well as the highest maximum plasma concentration. Levels B, C, and multiple-C of IVIVC models were achieved. The FaSSIF medium discriminated the dissolution profiles of EFV APIs. Small differences in particle size distribution had a significant impact on the biopharmaceutical parameters of EFV, suggesting that strict control of such parameter is an important aspect during API development and drug formulation. [ABSTRACT FROM AUTHOR]

In vitro and in vivo studies of gliclazide (GLZ)–loaded freeze-dried alginate-gelatin (AL-GL) beads were carried out, aiming to modify its oral bioavailability. Crosslinked freeze-dried GLZ AL-GL beads (particle size: 1.5- and 3.0-mm) were prepared. In vitro evaluation of GLZ AL-GL beads included SEM, DSC, FT-IR, and release rate study in gradient media. In vivo study was single-dose (4 mg/kg), randomized, parallel-group design, two-treatment (T: test GLZ AL-GL beads and R: reference product Diamicron® 30-mg MR tablet) conducted in 96 healthy rats. Each group was subdivided into 2 sub-groups (G1 and G2) having different blood sampling schemes for up to 72 h. Assessment of level A in-vitro-in-vivo correlation (IVIVC) model was carried out. AL-GL beads successfully increased GLZ release rate compared to R. GLZ percent released (Q4h) was 109.34, 86.85, and 43.43% for 1.5-mm and 3.0-mm beads and R, respectively. DSC analysis confirmed the interaction of AL-GL via crosslinking. No chemical interaction of GLZ has occurred as proved by FT-IR. Relative bioavailability (T/R) for AUC0-∞ was 132.45% for G1 and 146.16% for G2. No significant differences between T and R in the primary pharmacokinetic parameters were determined. Tmax values were found to be earlier in the case of G1 than those of G2. A secondary absorption peak of GLZ was clearly detected in the case of R while its sharpness was minimized in T. High IVIVC was established, and hence, the proposed in vitro release model perfectly correlated with the in vivo study. The current study design might be a platform to enable panoramic view for GLZ variability in vivo. [ABSTRACT FROM AUTHOR]

The digestion of starch‐based foods in the small intestine as well as factors affecting their digestibility have been previously investigated and reviewed in detail. Starch digestibility has been studied both in vivo and in vitro, with increasing interest in the use of in vitro models. Although previous in vivo studies have indicated the effect of mastication and gastric digestion on the digestibility of solid starch‐based foods, the physical breakdown of starch‐based foods prior to small intestinal digestion is often less considered. Moreover, gastric digestion has received little attention in the attempt to understand the digestion of solid starch‐based foods in the digestive tract. In this review, the physical breakdown of starch‐based foods in the mouth and stomach, the quantification of these breakdown processes, and their links to physiological outcomes, such as gastric emptying and glycemic response, are discussed. In addition, the physical breakdown aspects related to gastric digestion that need to be considered when developing in vitro–in vivo correlation in starch digestion studies are discussed. The discussion demonstrates that physical breakdown prior to small intestinal digestion, especially during gastric digestion, should not be neglected in understanding the digestion of solid starch‐based foods. [ABSTRACT FROM AUTHOR]

[Display omitted] The administration of insulins by subcutaneous injection is nowadays widely prevalent. The injection site is located below the dermis and composed of cells and the extracellular matrix formed of a network of macromolecules such as hyaluronic acid and collagen. Following an injection, the insulins from the formulated products are timely released as drug molecules from the injection site into systemic circulation. In this publication, we show the development of an in vitro setup utilizing a hydrogel composed of a special collagen-hyaluronic acid mixture that mimics the extracellular matrix. Another setup was used for differentiation of the commercially available and research insulin formulations by determining the in vitro permeation characteristics with the results that were correlated with the human in vivo data. Significant differentiation was achieved at 90 % confidence level between the permeation curves of insulin glulisine containing formulations (U100 and a concentrated research formulation), while in case of the insulin lispro containing formulations (U100 and U200) the permeation curves showed similarity. These results demonstrated that the in vitro setup may be used as a tool for formulation development and drug candidate profiling as it is able to differentiate or show similarities between the agglomeration states and concentration of the active pharmaceutical ingredients. [ABSTRACT FROM AUTHOR]

[Display omitted] • Excellent prediction of liposome performance, contingent on serum in release media. • Biopredictive method measures influence of dynamic protein corona on drug release. • Patient-specific IVIVCs support dose calculations and interchange of nanosimilars. • Improved liposomal doxorubicin TLD-1 shares release mechanism of Doxil® but differs in circulation time. In the century of precision medicine and predictive modeling, addressing quality-related issues in the medical supply chain is critical, with 62 % of the disruptions being attributable to quality challenges. This study centers on the development and safety of liposomal doxorubicin, where animal studies alone often do not adequately explain the complex interplay between critical quality attributes and in vivo performances. Anchored in our aim to elucidate this in vitro-in vivo nexus, we compared TLD-1, a novel liposomal doxorubicin delivery system, against the established formulations Doxil® and Lipodox®. Robust in vitro-in vivo correlations (IVIVCs) with excellent coefficients of determination (R2 > 0.98) were obtained in the presence of serum under dynamic high-shear conditions. They provided the foundation for an advanced characterization and benchmarking strategy. Despite the smaller vesicle size and reduced core crystallinity of TLD-1, its release behavior closely resembled that of Doxil®. Nevertheless, subtle differences between the dosage forms observed in the in vitro setting were reflected in the bioavailabilities observed in vivo. Data from a Phase-I clinical trial facilitated the development of patient-specific IVIVCs using the physiologically-based nanocarrier biopharmaceutics model, enabling a more accurate estimation of doxorubicin exposure. This advancement could impact clinical practice by allowing for more precise dose estimation and aiding in the assessment of the interchangeability of generic liposomal doxorubicin. [ABSTRACT FROM AUTHOR]

Objectives: The objective of this study was to establish and validate an in vitro-in vivo correlation (IVIVC). To investigate the safety of a fixed-dose combination (FDC) versus the reference formulations (Januvia® 100 mg Filmtabletten co-administered with Glucophage® SR 1000 mg prolongedrelease tablets), a bioequivalence study was conducted in the fasted and fed states, and the data generated were used to establish the correlation. Materials and Methods: The formulations used in the bioequivalence study were a FDC (sitagliptin hydrochloride equivalent to 100 mg of sitagliptin and metformin hydrochloride 1000 mg prolonged release) and Januvia® 100 mg co-administered with Glucophage® SR 1000 mg. The plasma profiles from the bioequivalence study and respective dissolution data were then utilized to establish "level A" IVIVC. The procedure comprises pharmacokinetic modeling to derive the empirical constants for further use in deconvolution and convolution procedures. Levy plots were constructed to understand the relationship between in vitro and in vivo properties. The internal and external predictabilities were evaluated by comparing the predicted pharmacokinetics with the observed values from the bioequivalence study. Results: The formulations showed approximately 91%-95% and 89%-91% dissolution, respectively in fasted and fed-state dissolution media for sitagliptin. The dissolution of metformin was 96%-98% and 89%-95%, respectively, in fasted and fed-state media. The regression coefficients of all the Levy plots were more than 0.900, indicating a linear correlation between in vitro release and in vivo parameters. The prediction error value of internal and external predictabilities was below 10 and met the US Food and Drug Administration criteria. Therefore, it can be stated that the correlation models are validated and can be used for predictions and to setting the dissolution specifications. The safety and tolerability of the FDC was found to be superior to those of the reference formulations, as fewer adverse events occurred following administration of the FDC. Conclusion: Correlation models can be useful for the prediction of FDCs during the management life cycle of the product. The models can also serve as a surrogate for in vivo studies. The FDC was tolerable, and the adverse events were mild and similar to those observed with the reference products. Therefore, the FDC is safe for use in human subjects. [ABSTRACT FROM AUTHOR]

Transporters can play a key role in the absorption, distribution, metabolism, and excretion of drugs. Understanding these contributions early in drug discovery allows for more accurate projection of the clinical pharmacokinetics. One method to assess the impact of transporters in vivo involves co-dosing specific inhibitors. The objective of the present study was to optimize the dose and route of administration of a P-glycoprotein (P-gp) inhibitor, valspodar (PSC833), and a dual P-gp/breast cancer resistance protein (BCRP) inhibitor, elacridar (GF120918), by assessing the transporters' impact on brain penetration and absorption. A dual-infusion strategy was implemented to allow for flexibility with dose formulation. The chemical inhibitor was dosed intravenously via the femoral artery, and a cassette of known substrates was infused via the jugular vein. Valspodar or elacridar was administered as 4.5-hour constant infusions over a range of doses. To assess the degree of inhibition, the resulting ratios of brain and plasma concentrations, Kp's, of the known substrates were compared to the vehicle control. These data demonstrated that doses greater than 0.9 mg/hr/kg valspodar and 8.9 mg/hr/kg elacridar were sufficient to inhibit P-gp- and BCRP-mediated efflux at the blood-brain barrier in rats without any tolerability issues. Confirmation of BBB restriction by efflux transporters in preclinical species allows for subsequent prediction in humans based upon the proteomic expression at rodent and human BBB. Overall, the approach can also be applied to inhibition of efflux at other tissues (gut absorption, liver clearance) or can be extended to other transporters of interest using alternate inhibitors. [ABSTRACT FROM AUTHOR]