Search

Incessant development and introduction of novel cultivars with improved floral attributes are vital in the dynamic ornamental industry. Chrysanthemum (Chrysanthemum morifolium) is a highly favored ornamental plant, ranking second globally in the cut flower trade, after rose. Development of new chrysanthemum cultivars with improved and innovative modifications in ornamental attributes, including floral color, shape, plant architecture, flowering time, enhanced shelf life, and biotic and abiotic stress tolerance, is a major goal in chrysanthemum breeding. Despite being an economically important ornamental plant, the application of conventional and molecular breeding approaches to various key traits of chrysanthemum is hindered owing to its genomic complexity, heterozygosity, and limited gene pool availability. Although classical breeding of chrysanthemum has resulted in the development of several hundreds of cultivars with various morphological variations, the genetic and transcriptional control of various important ornamental traits remains unclear. The coveted blue colored flowers of chrysanthemums cannot be achieved through conventional breeding and mutation breeding due to technical limitations. However, blue-hued flower has been developed by genetic engineering, and transgenic molecular breeding has been successfully employed, leading to substantial progress in improving various traits. The recent availability of whole-genome sequences of chrysanthemum offers a platform to extensively employ MAS to identify a large number of markers for QTL mapping, and GWAS to dissect the genetic control of complex traits. The combination of NGS, multi-omic platforms, and genome editing technologies has provided a tremendous scope to decipher the molecular and regulatory mechanisms. However, the application and integration of these technologies remain inadequate for chrysanthemum. This review, therefore, details the significance of floral attributes, describes the efforts of recent advancements, and highlights the possibilities for future application towards the improvement of crucial ornamental traits in the globally popular chrysanthemum plant.

The aim of the present study was to investigate the differences in volatile profiles among different Korean chrysanthemum cultivars grown as cut flowers. To optimize a method for sampling and comparing scents, the scents were evaluated by electronic nose (E-nose) at different flowering stages and in different organs and cultivars. The values of maximum resistance changes of metal oxide semiconductor sensors and relative aroma intensity were highest at flowering stage III (full flower stage of ray florets and initial opening disc florets) among different stages and in disc florets among different floral organs of cut chrysanthemums. Among the 12 chrysanthemum cultivars, the highest values for response change and relative aroma intensity were observed in the flowers of the ‘Ilweol’ cultivar. To compare scent patterns among the cultivars, E-nose sensor data was subjected to multivariate statistical analysis. Principal component analysis and discriminant function analysis of the volatile metabolic profile data indicated that chrysanthemum samples were clearly discriminated in a cultivar-dependent manner. These results show that different cultivars are characterized by distinct volatile profiles. Hierarchical cluster analysis showed that the 12 chrysanthemum cultivars were separated into 3 main groups according to the relationship of volatile profiles; however, chrysanthemum cultivars were not clustered according to the flower shape. We propose that these results could be used as the basis on which to improve the breeding of cut chrysanthemums based on volatile characteristics.

Virus-induced gene silencing (VIGS) is widely used for functional analysis of genes in plants. Because of the variation in its effectiveness among plant species, the VIGS system is normally optimized using the phytoene desaturase (PDS) gene as a visible indicator. In this study, we optimized an efficient VIGS system for petunias using the PDS gene isolated from pepper (Capsicum annuum) plants as a visible indicator. Application of the CaPDS gene effectively induced gene silencing in the petunia cultivars Mirage Rose, Mirage Pink, and Picobella Blue. However, silencing effectiveness was observed to be limited by genotypes and inoculation methods; apical meristem application was the appropriate method, whereas the highest silencing effectiveness among the cultivars was found in Picobella Blue. In addition, it was found that higher silencing effectiveness was associated with higher degradation of the endogenous PhPDS mRNA. Moreover, in terms of plant age and temperatures, 3-week-old plants grown at 20 °C day/18 °C night showed high silencing effectiveness for all cultivars. Taken together, infection of apical meristem of 3-week-old plants grown at 20 °C day/18 °C night with pTRV2-CaPDS exhibited the highest silencing effectiveness of all cultivars. Therefore, this study indicated the effectiveness of the CaPDS in the VIGS experiment with petunias, as well as the involvement of different factors in the mechanism influencing silencing effectiveness in petunias. These results will enable high-throughput functional analysis of genes associated with commercially important traits in petunias. CaPDS gene effectively induced gene silencing in the petunia cultivars, however, higher silencing effectiveness was observed to be limited by genotypes, inoculation methods, plant age, inoculation temperature, and presence of endogenous PhPDS mRNA.

Fungal diseases pose a major threat to ornamental plants, with an increasing percentage of pathogen-driven host losses. In ornamental plants, management of the majority of fungal diseases primarily depends upon chemical control methods that are often non-specific. Host basal resistance, which is deficient in many ornamental plants, plays a key role in combating diseases. Despite their economic importance, conventional and molecular breeding approaches in ornamental plants to facilitate disease resistance are lagging, and this is predominantly due to their complex genomes, limited availability of gene pools, and degree of heterozygosity. Although genetic engineering in ornamental plants offers feasible methods to overcome the intrinsic barriers of classical breeding, achievements have mainly been reported only in regard to the modification of floral attributes in ornamentals. The unavailability of transformation protocols and candidate gene resources for several ornamental crops presents an obstacle for tackling the functional studies on disease resistance. Recently, multiomics technologies, in combination with genome editing tools, have provided shortcuts to examine the molecular and genetic regulatory mechanisms underlying fungal disease resistance, ultimately leading to the subsequent advances in the development of novel cultivars with desired fungal disease-resistant traits, in ornamental crops. Although fungal diseases constitute the majority of ornamental plant diseases, a comprehensive overview of this highly important fungal disease resistance seems to be insufficient in the field of ornamental horticulture. Hence, in this review, we highlight the representative mechanisms of the fungal infection-related resistance to pathogens in plants, with a focus on ornamental crops. Recent progress in molecular breeding, genetic engineering strategies, and RNAi technologies, such as HIGS and SIGS for the enhancement of fungal disease resistance in various important ornamental crops, is also described.

Background The aim of this study was to evaluate the efficacy of deproteinized bovine bone mineral with 10% collagen (DBBM-C) soaked with hyaluronic acid (HA) for ridge preservation in compromised extraction sockets. Methods Bilateral third, fourth premolars and first molar were hemisected, distal roots were extracted, and then combined endodontic periodontal lesion was induced in the remaining mesial roots. After 4 months, the mesial roots were extracted and the following four treatments were randomly performed: Absorbable collagen sponge (ACS), ACS soaked with HA (ACS+HA), Ridge preservation with DBBM-C covered with a collagen membrane (RP), Ridge preservation with DBBM-C mixed with HA and covered with a collagen membrane (RP+HA). Animals were sacrificed at 1 and 3 months following treatment. Ridge dimensional changes and bone formation were examined using microcomputed tomography, histology, and histomorphometry. Results At 1 month, ridge width was significantly higher in the RP and RP+HA groups than in the ACS and ACS+HA groups, while the highest proportion of mineralized bone was observed in ACS+HA group. At 3 months, ridge width remained significantly higher in the RP and RP+HA groups than in the ACS and ACS+HA groups. ACS+HA and RP+HA treatments featured the highest proportion of mineralized bone and bone volume density compared to the other groups. No statistical difference was observed between ACS+HA and RP+HA treatments. Conclusions Ridge preservation with the mixture DBBM-C/HA prevented dimensional shrinkage and improved bone formation in compromised extraction sockets at 1 and 3 months. This article is protected by copyright. All rights reserved, One sentence summary. The mixture of hyaluronic acid and deproteinized bovine bone mineral with 10% collagen in compromised extraction sockets can improve bone formation and prevent dimensional shrinkage.

This study aims to investigate and assess salivary biomarkers and microbial profiles as a means of diagnosing periodontitis. A total of 121 subjects were included: 28 periodontally healthy subjects, 24 with Stage I periodontitis, 24 with Stage II, 23 with Stage III, and 22 with Stage IV. Salivary proteins (including active matrix metalloproteinase-8 (MMP-8), pro-MMP-8, total MMP-8, C-reactive protein, secretory immunoglobulin A) and planktonic bacteria (including Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, Tannerella forsythia, Treponema denticola, Fusobacterium nucleatum, Prevotella intermedia, Porphyromonas nigrescens, Parvimonas micra, Campylobacter rectus, Eubacterium nodatum, Eikenella corrodens, Streptococcus mutans, Staphylococcus aureus, Enterococcus faecalis, and Actinomyces viscosus) were measured from salivary samples. The performance of the diagnostic models was assessed by receiver operating characteristics (ROCs) and area under the ROC curve (AUC) analysis. The diagnostic models were constructed based on the subjects&rsquo, proteins and/or microbial profiles, resulting in two potential diagnosis models that achieved better diagnostic powers, with an AUC value &gt, 0.750 for the diagnosis of Stages II, III, and IV periodontitis (Model PA-I, AUC: 0.796, sensitivity: 0.754, specificity: 0.712) and for the diagnosis of Stages III and IV periodontitis (Model PA-II, AUC: 0.796, sensitivity: 0.756, specificity: 0.868). This study can contribute to screening for periodontitis based on salivary biomarkers.

OBJECTIVE To verify whether ridge preservation is effective in the reduction of dimensional loss and in bone formation compared to spontaneous healing in extraction sockets of periodontally compromised teeth. METHODS Twenty-six subjects requiring tooth extraction for stage III/IV periodontitis were randomly assigned to one of two interventions: alveolar ridge preservation using collagenated bovine bone mineral and a resorbable collagen membrane (test, RP) or spontaneous healing (control, SH). Six months later, postoperative cone-beam computed tomography (CBCT) was performed to measure the linear and volumetric changes of the sockets compared to baseline scans. Biopsies were retrieved at the implant site for histomorphometric calculations. Nonparametric tests were applied for statistical analysis. RESULTS Significantly less shrinkage occurred in RP compared to SH, mainly in the crestal zone. The width loss difference between groups was 3.3 mm and 2.2 mm at 1 mm and 3 mm below the crest, respectively (p

OBJECTIVE To test whether or not topically administered recombinant human epidermal growth factor (rhEGF) accelerates the early healing phase of oral soft tissue wounds. METHODS One day following the creation of palatal defects (n = 6/animal), 14 dogs were allocated to one of the following five groups: spontaneous healing (SH), vehicle ointment (V), vehicle ointment + rhEGF at concentrations of 1 μg/g (EGF1), 10 μg/g (EGF10) or 50 μg/g (EGF50). Topical administration of ointments was repeated twice per day until sacrifice at days 8 and 16. Wound area was clinically monitored. Keratinocytes proliferation (Ki67-immunolabelling), inflammatory response (IR) and areas of collagen (C) and granulation tissue (GT) were histologically measured. Kruskal-Wallis test with Dunnett correction was used for multiple group statistical comparisons. RESULTS Clinically, in comparison with SH, a significantly smaller wound area was observed in groups EGF1 and EGF10 at day 8 (p

Various studies have investigated 3-dimensional (3D)-printed implants using Ti-6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses.Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses.All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants.Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

Autoinducer (AI)-2 has an important role in biofilm formation in the oral environment. Mature biofilms formed as a result of the cell-to-cell communication make it difficult to overcome periodontitis with the use of antibiotics. Previous in vitro studies suggest that quorum-sensing inhibitors (QSIs) interfere with AI-2. This study compares the QSI effects resulting from an oral inoculation of Porphyromonas gingivalis in an experimental animal model.Forty-five male mice were divided into three groups (n = 15 each): 1) infection; 2) QSI; and 3) control. Infection and QSI groups received oral inoculation of P. gingivalis, whereas treatment with QSIs (furane compound and d-ribose) was only performed in the QSIs group. The control group was a negative control not receiving manipulation. After 42 days, mice were sacrificed, and the distance from the alveolar bone crest (ABC) to the cemento-enamel junction (CEJ) was measured by microcomputed tomography. P. gingivalis DNA was quantified in the soft and hard tissues around the molar teeth by real-time polymerase chain reaction.Distance from ABC to CEJ was significantly increased in the P. gingivalis infection group compared with the control group (P = 0.02) and significantly decreased in the QSI group compared with the infection group (P = 0.02). The QSI group contained 31.64% of the bacterial DNA count of the infection group.Use of QSIs in the mice infection model showed a reduction of bone breakdown and a decrease in the number of bacteria in vivo, suggesting that QSIs can be a new approach to prevention and treatment of periodontitis.

This study aimed to evaluate the dynamics of newly bone formation and dimensional change in diseased extraction sockets using Bio-OssIn six beagle dogs, right and left 3rd and 4th mandibular premolars were hemisected and the distal roots were removed. Combined endodontic-periodontic lesions were induced in all sites using black silk, collagen sponge, endodontic files, and application of Porphyromonas gingivalis. After 4 months, among 4 premolars, three teeth were randomly selected per dog and allocated to the following experimental groups: Control group (no treatment but debridement), Test 1 group (only Bio-OssThe vertical distance between buccal and lingual crests in the Control group (2.22 ± 0.26 mm) and Test 2 group (1.80 ± 0.16 mm) was significantly different. The socket of the Test 2 group (27.04 ± 5.25%) was occupied by a greater quantity of bone graft compared to the Test 1 group (18.49 ± 2.11%).Ridge preservation in diseased extraction sockets could compensate for buccal bone resorption by contact osteogenesis surrounding the bone graft particles at the bucco-coronal area during socket healing, and the application of a collagen membrane at the entrance of the socket is useful for preserving graft material at the coronal part of the socket.

Background: Previous studies on ridge preservation focusing on fresh extraction sockets using graft materials for ridge preservation procedures have reported a delay in the tissue modeling and remodeling phases. The objective of this study is to evaluate the effect of hyaluronic acid (HA) on healing of infected sockets. Methods: Six beagle dogs were used in this study. Both mandibular third premolars were hemisected, and the distal roots were extracted. Subsequently, periodontal and endodontic lesions were induced at the remaining mesial root. After communication of the periodontal lesion, an endodontic periapical lesion was observed at 4 months, and the mesial roots of both the right and left sides were extracted. HA was applied into the socket of the test group, and no treatment was administered to the other group (control group). Three months after extraction of the mesial roots, the dogs were sacrificed, and histologic evaluations were performed. Results: The sockets were filled by mineralized bone (47.80% – 6.60%) and bone marrow (50.47% – 6.38%) in the control group, whereas corresponding values were 63.29% – 9.78% and 34.73% – 8.97% for the test group, respectively. There was a statistically significant difference between the groups. Reversal lines and a copious lineup of osteoblasts were observed in the middle and apical parts of the sockets in the test group. Conclusion: An infected socket shows delayed healing of the socket wound, and HA, because of its osteoinductive, bacteriostatic, and anti-inflammatory properties, may improve bone formation and accelerate wound healing in infected sockets. J Periodontol 2016;87:790-795.

As an impactive factor on industries and national economy, The Social Overhead Capital(SOC) is major factor to determine the national competitiveness and the investment of SOC is essential for its economic growth. Accordingly, introduction of the preliminary feasibility study and establishment of legal institutionalization and evaluation system has been carried out and reviewed since 1999. Nevertheless of these efforts, basic problems such as lack of scientific method for investment evaluation and loss of effectiveness on feasibility studies are continuously being brought up. Moreover, as the preliminary study to improve the mentioned problems is mainly focused on the economic and estimated demand analysis, the study of policy analysis, the most important phase during a feasibility study, is still insufficient. Therefore, in this paper, a quantitative decision-making model, to which the performance assessment method of Value Engineering(VE) is applied, is developed and proposed to improve the policy analysis of (preliminary) feasibility study that requires combining with relative studies, to induce quantitative analysis method, and to contribute the improvement of value on the political aspect for SOC investment goals and use as a strategic decision-making method by systematic analysis.