Search

To (1) evaluate the optimal drill orientation of the anterolateral ligament (ALL) femoral tunnel to minimize collision with the anterior cruciate ligament (ACL) femoral tunnel during anatomical ACL reconstruction according to the need for far-cortex drilling and (2) investigate the geometric factors that affect tunnel collision secondary to drill orientation of the ALL femoral tunnel.A three-dimensional femoral model of patients who underwent anatomical single-bundle ACL reconstruction between 2015 and 2016 was constructed, and the geometric factors were evaluated. Virtual ALL femoral tunnels were created to simulate 45 drilling conditions. For each condition, whether the virtual ALL femoral tunnel and its trajectory violated the femoral cortex and the minimum distance between tunnels was investigated.Thirty-nine subjects were included. Overall violation rates of the femoral cortex by the ALL tunnels and its trajectories were 11.1% (195 of 1755 conditions) and 40.7% (714 of 1755 conditions), respectively. A drilling angle of axial 0° and coronal - 40° showed the longest minimum distance between tunnels without femoral cortex violation by the ALL tunnel (6.3 ± 4.0 mm; collision rate 2.6% [1 of 39 subjects]). With simultaneous consideration of the ALL tunnel's trajectory representing far-cortex drilling, a drill angle of axial 40° and coronal 10° showed the longest minimum distance between tunnels without femoral cortex violation (0.6 ± 3.9 mm; collision rate 38.5% [15 of 39 subjects]). For surgical techniques requiring far-cortex drilling, regression analyses were performed on geometric factors that could affect tunnel collision, which revealed that the sagittal inclination angle of the ACL and the distance between the ACL femoral tunnel's outlet and ALL's femoral attachment were associated with tunnel collision.The optimal drill orientations of the ALL femoral tunnel to minimize collision with the ACL femoral tunnel were axial 0° and coronal - 40° for surgical techniques not requiring far-cortex drilling and axial 40° and coronal 10° for techniques requiring far-cortex drilling. For techniques requiring far-cortex drilling, additional adjustment for orientation of the ACL femoral tunnel is required to reduce the risk of tunnel collision. Therefore, an individualized surgical strategy should be applied according to the graft fixation method of the ALL femoral tunnel.

To investigate the surgical outcomes of anatomical anterior cruciate ligament (ACL) reconstruction according to the graft isometry measured during surgery. Electrical medical records of patients who underwent an arthroscopic ACL reconstruction through the transportal technique using hamstring tendon autograft between 2012 and 2016 were retrospectively reviewed. The patients were classified into two groups based on the graft length change throughout the knee range of motion measured just before graft fixation (Group 1, graft length change ≤ 2 mm; Group 2, graft length change > 2 mm). Comparative analyses, including a non-inferiority trial, were performed regarding the clinical scores, knee laxity, and radiographic parameters between the groups. A total of 67 patients were included in the study. The total change in the length of ACL graft throughout the knee range of motion was 1.4 ± 0.4 mm in Group 1 (range, 0.2–2.0 mm), and 3.0 ± 0.7 mm in Group 2 (range, 2.2–5.0 mm). Group 1 showed a relatively high (proximal) femoral tunnel and shallow (anterior) tibial tunnel compared to Group 2 (P

Background: Increased varus alignment of the lower extremity is known to be a poor prognostic factor for the surgical repair for a medial meniscus root tear (MMRT). However, given the concept of constitutional varus, which is present in a substantial portion of the normal population, the generally accepted surgical indication for MMRT concerning a varus alignment of 5° may be unnecessarily narrow. Purpose: To compare the surgical outcomes of arthroscopic transtibial pullout repair of MMRT according to the degree of varus alignment of the lower extremity. Study Design: Cohort study; Level of evidence, 3 Methods: Patients who underwent isolated arthroscopic transtibial pullout repair of MMRT between January 2010 and July 2017 at one institution and had a minimum follow-up of 2 years were included in this study. Patients were classified into 1 of 2 groups: the experimental group (n = 22) included patients with a preoperative hip-knee-ankle angle between 5° and 10° varus (mild to moderate varus alignment) and the control group (n = 51) included those with a preoperative hip-knee-ankle angle Results: There were no statistically significant differences in surgical outcomes between the groups in subjective and objective aspects, which were consistent before and after inverse probability of treatment weighting. Apart from the clinical improvement observed in both groups, overall degenerative changes in the knee were found, although progression rates did not differ between the groups. In terms of the noninferiority trial, the overall surgical outcomes in the experimental group were not inferior to those in the control group. Conclusion: The short-term surgical outcomes of arthroscopic transtibial pullout repair for MMRT of patients with mild to moderate varus alignment were not inferior to but rather comparable with those with neutral alignment in terms of subjective and objective aspects. Therefore, it would be inappropriate to exclude patients with a diagnosis of MMRT from being indicated for the surgery simply because of mild to moderate varus alignment.

Background It is unclear whether different anterior cruciate ligament (ACL) graft trajectories in the distal femur would have different effects on stress generated within the distal femur around the femoral tunnel during knee motion. Thus, the purpose of this study was to determine differences in stress patterns around the femoral tunnel created by trans-portal (TP) vs. modified trans-tibial (TT) technique in anatomical ACL reconstruction at different knee flexion angles. Methods Twelve male subjects’ right knees were scanned with a high-resolution computed tomography (CT) scanner (slice thickness: 1 mm) at four different knee flexion angles (0°, 45°, 90°, and 135°). Three-dimensional (3D) models of these four different flexion angles were created and manipulated with several modelling programs. For the TP group, the virtual femoral tunnelling procedure was performed in a 135° flexion model from the low far anteromedial (AM) portal. For the modified TT group, the same knee models were drilled through the modified TT technique at 90° of flexion separately. Virtual grafts under tension of 40 N were put into corresponding bone tunnel and fixed at the outer aperture of femoral tunnels to simulate the suspensory fixation, followed by fixation of the grafts at the middle of tibial tunnels in the 0° knee flexion models. Finally, the models were exported to a finite element analysis package and analysed using ABAQUS/Explicit code (ABAQUS, USA) to monitor the stress occurring at the node where stress distribution occurred most significantly in the femoral bone around the bone tunnel. Results In general, both groups showed a high stress distribution in bony structures around inner and outer orifices of the femoral tunnel. Mean maximal stresses occurring at the lateral femoral condyle around the inner orifice of the femoral tunnel in the TP group were found to be significantly greater than those in the modified TT group at all flexion angles except 90° of flexion. Mean maximal stresses monitored around the outer orifice of the femoral tunnel in the TP group were also significantly greater than those in the modified TT group at all flexion angles. Conclusions Different tunnelling technologies could yield different stress patterns in the lateral femoral condyle around the femoral tunnel. During knee motion, higher stresses were noticed in the TP group than in the modified TT group, especially around inner and outer orifices of the tunnel. Position of the tunnel after reconstruction with the TP technique can have a greater effect on the stress increase in the femur compared to that with the modified TT technique.

Background: Conflicting results have been reported concerning the progression of medial meniscal extrusion (MME) after arthroscopic transtibial pull-out repair of medial meniscus posterior root tear (MMRT), and no study has evaluated the relevant factors affecting the progression of MME. Purpose: To (1) evaluate the subjective and objective surgical outcomes of arthroscopic transtibial pull-out repair of MMRT and (2) identify relevant factors affecting the progression of MME after surgery. Study Design: Case-control study; Level of evidence, 3. Methods: A total of 63 patients who underwent isolated arthroscopic transtibial pull-out repair of MMRT between January 2010 and June 2017 were evaluated retrospectively. Clinical scores and various radiographic parameters were evaluated to assess the surgical outcomes. The patients were classified into 2 groups according to the change in medial meniscal extrusion ratio (MMER) at 1 year after surgery compared with before surgery (group 1 consisted of 21 patients with reduced or maintained MMER; group 2 consisted of 42 patients with increased MMER). Variables including baseline demographics, radiographic parameters, and arthroscopic findings were compared to identify relevant factors affecting the progression of MME after surgery. Results: In the overall cohort, clinical outcomes at postoperative 2 years improved significantly ( P < .001 for visual analog scale score, International Knee Documentation Committee subjective score, and Lysholm score), whereas radiographic parameters showed an overall deterioration compared with the preoperative level. In subgroup comparisons, a significant difference was seen in the time from the onset of symptoms until surgery ( P < .001), defined as preoperative symptom duration, which a subsequent logistic regression analysis revealed to be a relevant factor associated with the progression of MMER ( P = .015). Both groups showed progression of radiographic osteoarthritis, but the progression was significantly higher in group 2 compared with group 1 at postoperative 2 years ( P = .032). On receiver operating characteristic curve analysis, the cutoff point for preoperative symptom duration associated with the progression of MMER was 13 weeks (sensitivity, 52.4%; specificity, 76.2%; accuracy, 72.4%). Conclusion: The arthroscopic transtibial pull-out repair of MMRT showed clinical improvement but did not prevent the progression of knee osteoarthritis, MME, or MMER. Although the preservation of MMER was not capable of completely preventing the progression of knee degeneration, MMER still has a potential clinical value in delaying the rate of progression of knee degeneration. Early surgical repair of MMRT, within 13 weeks from the onset of symptoms, might be helpful to prevent the progression of MME.

Background Although the measurement of coronal alignment of the lower limb on conventional full-length weight-bearing anteroposterior (FLWAP) radiographs was reported to be influenced by the knee joint rotation, no comparative analysis was performed considering the effects of knee joint rotation on the sagittal and axial planes simultaneously using the three-dimensional images while taking into account the actual weight-bearing conditions. The aim of this study was to investigate the effect of knee joint rotation on the measurement accuracy of coronal alignment of the lower limb on the FLWAP radiograph. Methods Radiographic images of 90 consecutive patients (180 lower limbs) who took both the FLWAP radiograph and the EOS image were retrospectively reviewed. The relationship among delta values of mechanical tibiofemoral angle (mTFA) between the FLWAP radiographs and the EOS images (ΔmTFA), knee flexion/extension angle (sagittal plane rotation) on the EOS images, and patellar rotation (axial plane rotation) on the FLWAP radiographs were analyzed. Further, subgroup analysis according to each direction of knee joint rotation was performed. Results There was a significant correlation between ΔmTFA and sagittal plane rotation (r = 0.368, P r = 0.399, P r2 = 0.136, P r2 = 0.257, P Conclusion The measurement accuracy of coronal alignment of the lower limb on the FLWAP radiographs would be influenced by knee flexion, specifically when there is any subtle rotation of the knee joint in the axial plane. A strict patellar forward position without axial plane rotation of the knee could provide accurate results of the measurement even if there is a fixed flexion contracture of the knee.

Background Tension pneumothorax on the contralateral lung during one-lung ventilation (OLV) can be life-threatening if not rapidly diagnosed and managed. However, diagnosis is often delayed because the classic signs of tension pneumothorax are similar to clinical manifestations commonly observed during OLV. Case We report a case of contralateral tension pneumothorax in a patient undergoing right upper lobectomy during OLV. The patient suffered from sudden cardiac arrest and was assisted by extra-corporeal membrane oxygenation. Conclusions Contralateral pneumothorax during OLV is rare but can occur at any time. Therefore, anesthesiologists should consider this critical complication.

The aim of this study was to identify the effect of cartilage lesion in the lateral compartment of the knee on the surgical outcome of medial open-wedge high tibial osteotomy (MOWHTO). A total of 172 consecutive patients who underwent MOWHTO were evaluated retrospectively. Among the patients who underwent second-look arthroscopic assessment, 30 patients with lateral compartment cartilage lesion (group 1: ≥ grade 2 cartilage lesion according to the International Cartilage Repair Society [ICRS] grading system) and 64 patients with normal or near-normal lateral compartment cartilage (group 2: grade 0 or 1 cartilage lesion according to the ICRS grading system) were included in the analysis. Each patient was evaluated for the following variables: clinical scores, radiographic osteoarthritis grade, and comparative measurement under arthroscopy. All clinical scores were similar between the two groups preoperatively and at the time of second-look operation. Group 1 showed a significantly higher osteoarthritis grade in the lateral compartment of the knee on the 30 degree flexed posteroanterior view according to the International Knee Documentation Committee grading system preoperatively (p = 0.005) and at the time of second-look operation (p = 0.002). In regard to the comparative measurement under arthroscopy, the size of cartilage lesion on the medial compartment decreased by time in both groups (p = 0.000), whereas the size of cartilage lesion on the lateral compartment increased by time in both groups (p = 0.004). However, the degree of change in the cartilage lesion size in each compartment of the knee over time did not significantly differ between the two groups. Regarding the cartilage lesion grade in the lateral compartment, there was no statistically significant difference in the frequency of deterioration between the two groups. As a result, the presence of cartilage lesion of ICRS grade 2 or 3 in the lateral compartment of the knee, either subtle or not detected during the preoperative evaluation, would not affect the surgical outcome of MOWHTO. This is a Level IV, therapeutic case series study.

(1) To analyse popliteal artery (PA) movement in a three-dimensional (3D) coordinate system in relation to knee flexion and high tibial osteotomy (HTO) techniques (lateral closed wedge HTO [LCHTO], uniplane medial open wedge HTO [UP-MOHTO], biplane medial open wedge HTO [BP-MOHTO]) and (2) to identify safe zones of the PA in each osteotomy plane. Sixteen knees of patients who underwent magnetic resonance imaging with extension and 90° flexion were used to develop subject-specific 3D knee flexion models. Displacement of the PA during knee flexion was measured along the X- and Y-axis, as was the distance between the posterior tibial cortex and PA parallel to the Y-axis (d-PCA). Frontal plane safety index (FPSI) and maximal axial safe angles (MASA) of osteotomy, which represented safe zones for the osteotomy from the PA injury, were analysed. All measurements were performed along virtual osteotomy planes. Differences among the three osteotomy methods were analysed for each flexion angle using a linear mixed model. The average increments in d-PCA during knee flexion were 1.3 ± 2.3 mm in LCHTO (n.s.), 1.4 ± 1.2 mm in UP-MOHTO (P

High tibial osteotomy (HTO) is an effective alternative for medial compartmental knee osteoarthritis (OA). Circulating microRNAs (miRNAs) are known to serve as OA-related biomarkers. The present study investigated the differential expression of serum miRNAs before and after HTO to identify potential miRNAs as prognostic biomarkers. miRNA-polymerase chain reaction (PCR) arrays were used to screen for miRNAs in the serum at preoperative and 6-month postoperative time points from six patients, and the differentially expressed miRNAs identified in the profiling stage were validated using real-time PCR at post-operative months 6 and 18 in 27 other HTO-treated patients. Among 84 miRNAs involved in the inflammatory process, three (miR-19b-3p, miR-29c-3p, and miR-424-5p) showed differential expression patterns in the profiling stage (p = 0.011, 0.015, and 0.021, respectively). Levels of these three and four other miRNAs (miR-140-3p, miR-454-3p, miR-let-7e-5p, and miR-885-5p) known to be related to OA progression were evaluated in the serum of 27 patients. Only four miRNAs (miR-19b-3p, miR-140-3p, miR-454-3p, and miR-let-7e-5p) were significantly upregulated at postoperative month 6 (p = 0.003, 0.005, 0.004, and 0.004, respectively), and only miR-140-3p was significantly upregulated up to 18 months after operation (p = 0.003). Together, this study reveals the significantly upregulated serum miRNAs after HTO as potential prognostic biomarkers, however, further studies are warranted to elucidate their clinical implications.

The medial patellofemoral ligament (MPFL) is the primary soft-tissue stabilizer of the patella, acting as a checkrein to lateral patellar displacement. Considering the growing awareness regarding the anatomy and biomechanics of MPFL, numerous studies have been conducted on surgical reconstruction of the MPFL. However, while MPFL reconstruction has been recognized as an established surgical procedure for recurrent patellar dislocation with overall favorable clinical outcomes, there are numerous debatable issues that have not yet been resolved. These include a lack of consensus regarding surgical indications, graft selection, graft tensioning, surgical technique, and indications for other surgical procedures. Since the cause of patellofemoral instability is multifactorial and there is still no conclusive evidence that a particular surgical option is superior to others, thorough evaluation of proper patient selection and individualized surgical planning is required to yield successful outcomes.

To investigate the surgical outcomes of anterior cruciate ligament (ACL) reconstruction using a low-dose irradiated tibialis anterior allograft with a fixed-loop cortical suspension device for the femur based on the graft insertion length (GIL) in the femoral tunnel.Between January 2010 and January 2018, the medical records of consecutive patients who underwent arthroscopic ACL reconstruction with a tibialis anterior allograft fixed with the EndoButton CL for the femur and who had at least 2 years of follow-up were retrospectively evaluated. Patients were classified into 3 groups based on the GIL in the femoral tunnel (group 1, GIL15 mm; group 2, GIL of 15-20 mm; and group 3, GIL20 mm), and their functional scores, knee laxity, and radiographic parameters were evaluated.A total of 91 patients were analyzed. There were no statistically significant differences in the functional scores and knee laxity between the 3 groups at 2 years postoperatively. However, significant differences were observed in tunnel widening at 1 year postoperatively in the femur (P = .045 for absolute value and P = .004 for relative value) and the tibia (P = .014 for absolute value and P = .012 for relative value), revealing that both the femoral and tibial tunnels widened as the GIL decreased. Additional linear regression analyses were performed to identify whether the GIL independently affects tunnel widening. Consequently, the femoral tunnel depth, tunnel diameter, and GIL were found to independently influence femoral tunnel widening (P = .008, P = .019, and P.001, respectively), whereas the tunnel diameter and GIL affected tibial tunnel widening (P.001 and P = .004, respectively).The GIL in the femoral tunnel during ACL reconstruction using a tibialis anterior allograft with a fixed-loop cortical suspension device for the femur has no significant association with the postoperative functional outcomes and knee laxity, but it has a negative correlation with tunnel widening in the femur and the tibia.Level III, retrospective cohort study.

Background: While the medial meniscal posterior horn (MMPH) is reported to bear a considerable portion of overall load on the knee joint, including compressive and shear forces, no study has yet investigated the relationship between the MMPH and posterior tibial slope (PTS), which is a geometric factor associated with the shear force component in the presence of a compressive load in the knee joint. Hypothesis/Purpose: The purpose was to investigate the relationship between the PTS and MMPH tears in patients without ligamentous injury. It was hypothesized that the PTS is greater in patients with MMPH tears as compared with those without. Study Design: Cohort study; Level of evidence, 3. Methods: From March 2015 to December 2018, 159 patients with isolated MMPH tears and 60 patients without any pathologic findings on magnetic resonance imaging (control group) were included in this study. The PTS in the affected and contralateral knees was compared between the groups, which were statistically matched according to baseline characteristics (ie, age, sex, body mass index, radiographic osteoarthritis grade according to the Kellgren-Lawrence scale, and hip-knee-ankle angle) via the inverse probability of treatment weighting method. Furthermore, the MMPH tear group was subdivided according to meniscal tear patterns; these subgroups were then compared with the control group. Results: The mean PTS was significantly greater in the MMPH tear group than in the control group (affected knee: MMPH tear group, 7.0°± 3.4° [mean ± SD]; control group, 5.2°± 2.1°, P < .001; contralateral knee: MMPH tear group, 6.7°± 3.3°; control group, 4.7°± 2.2°, P < .001). The mean PTS in each subgroup also tended to be greater than that in the control group. In the receiver operating characteristic curve analysis, the cutoff point of the PTS discriminating between the MMPH tear and control groups was 6.6° for the affected knee (sensitivity, 55.3%; specificity, 75.0%) and 5.5° for the contralateral knee (sensitivity, 61.0%; specificity, 76.7%). Conclusion: An increased PTS is strongly associated with an increased incidence of MMPH tears and less affected by the meniscal tear patterns.

Purpose To investigate relevant factors influencing increases in medial joint space width (JSW) after medial open-wedge high tibial osteotomy (MOWHTO). Methods Between January 2010 and December 2018, the electronic medical records of consecutive patients who underwent MOWHTO and subsequent second-look arthroscopic assessment at least 12 months after MOWHTO were retrospectively evaluated. The patients were classified into 2 groups according to changes in the medial JSW of the knee at the time of the second-look operation compared with that at baseline before the initial surgical procedure. Various radiographic parameters, arthroscopic findings, and clinical scores were compared between the groups, and regression analysis was performed to identify factors related to increases in medial JSW. Results A total of 114 patients were analyzed. In a bivariate analysis, patients who experienced an increase in medial JSW showed a significantly higher postoperative weight-bearing line ratio (WBLR) (P = .008) and a greater proportion of severe preoperative cartilage lesions in the medial compartment of the knee compared with patients with a maintained or reduced medial JSW (P = .035). In terms of clinical scores, patients with an increased medial JSW showed relatively favorable clinical outcomes at the time of the second-look operation. Regression analysis indicated only postoperative WBLR as a relevant factor associated with an increase in medial JSW after MOWHTO (odds ratio, 1.057; P = .01). Additional analysis with patients reclassified according to the postoperative WBLR showed that as the postoperative WBLR increased, the medial JSW increased, without a significant change in the lateral JSW. Conclusions An increase in the medial JSW of the knee joint after MOWHTO appears to be associated with an increase in the postoperative WBLR, not with cartilage regeneration. Obtaining adequate correction so that the postoperative WBLR is within 60% to 70% would be desirable in terms of postoperative changes in the medial JSW, as well as clinical outcomes. Level of Evidence Level III, retrospective cohort study.

The aim of this study was to investigate radiographic factors relevant to predict surgical outcomes of arthroscopic partial meniscectomy (APM) in elderly patients with mild osteoarthritis (Kellgren–Lawrence grades 1 and 2). Data of 172 consecutive patients aged >70 years who underwent arthroscopic meniscal surgery were reviewed retrospectively. The patients who met the inclusion criteria were classified into two groups based on the minimal clinically important difference value of the Lysholm knee scoring scale comparing the score of the last visit with that of the preoperative period: group 1 (with clinically significant improvement) and group 2 (without clinically important change). Radiographic factors assessed on X-ray and magnetic resonance images were evaluated using bivariate and logistic regression analyses. A total of 73 patients were included in this study. Bivariate analysis revealed that the extent of meniscus extrusion (p = 0.031), meniscus extrusion ratio (p = 0.001), and grade of meniscus degeneration (p = 0.019) were significantly different between the groups. Multivariate logistic regression analysis showed that the meniscus extrusion ratio was the most important independent predictive factor for surgical outcomes with clinically important changes (coefficient = 0.159, p = 0.009). On receiver operating characteristic (ROC) curve analysis, the cutoff point of the meniscus extrusion ratio discriminating the two groups was 34.2% (sensitivity: 79.3%; specificity: 68.6%; accuracy: 72.6%). Meniscus extrusion ratio was the most relevant predictive factor for discriminating patients with clinically important change. Meniscus extrusion ratio, with the cutoff point of 34.2%, could serve as a guide to determine whether to perform APM in elderly patients with mild osteoarthritis. This is a Level IV, therapeutic case series study.

BackgroundAlthough it has been known that medial open wedge high tibial osteotomy (MOWHTO) would adversely affect the patellofemoral joint, no previous study examined the surgical outcome of MOWHTO according to the preexisting cartilage status of the patellofemoral joint. The aim of this study was to investigate the effect of MOWHTO on the patellofemoral joint with regard to objective and subjective aspects according to the preexisting cartilage status.MethodsNinety-two patients who underwent MOWHTO and a following second-look arthroscopic assessment were included in this study. The patients were divided into two groups according to the preexisting cartilage status of the patellofemoral joint: group 1 (International Cartilage Repair Society [ICRS] grade 2 or 3) and group 2 (ICRS grade 0 or 1). Comparative analysis was performed regarding clinical scores, radiographic parameters, and arthroscopic measurements between the two groups.ResultsClinical outcomes showed overall improvement from baseline to the time of second-look operation, with no significant difference between the two groups at each time point. There were no significant differences in radiographic parameters between the two groups. Radiographic grade of patellofemoral osteoarthritis in both groups showed a tendency to progress, without statistical significance. In arthroscopic assessment, the size of the cartilage lesion on the patellofemoral joint increased with time in both groups (P = 0.003), but the degree of change over time between the two groups was not statistically significant. Consistently, there was no significant difference in the frequency of progression of cartilage lesion grade in the patellofemoral joint between the two groups.ConclusionsMOWHTO would contribute to osteoarthritis progression of the patellofemoral joint regardless of the preexisting cartilage status, without an association with clinical outcomes in short-term follow-up.

Pseudohypoxic brain swelling (PHBS) is known to be an uncommon event that may occur during and following an uneventful brain surgery, when negative suction drainage is used. The cerebrospinal fluid loss related to suction drainage can evoke intracranial hypotension that progress to PHBS. The main presentations of PHBS are sudden unexpected circulatory collapses, such as severe bradycardia, hypotension, cardiac arrest, consciousness deterioration and diffuse brain swelling as seen with brain computerized tomography (CT). We present a stuporous 22-year-old patient who underwent cranioplasty under general anesthesia. The entire course of the general anesthesia and operation progressed favorably. However, the time of scalp suture completion, sudden bradycardia and hypotension occurred, followed by cardiac arrest immediately after initiation of subgaleal and epidural suction drainage. After successful resuscitation, the comatose patient was transferred to the neurosurgical intensive care unit and PHBS was confirmed using brain CT.

Rationale Autosomal dominant type II (AD II) osteopetrosis is a rare inheritable metabolic bone disease characterized by hard but brittle bone and a narrow medullary canal. Intramedullary nailing (IMN) is a difficult but attractive option for the treatment of subtrochanteric fractures in patients with AD II osteopetrosis. Patient concerns and diagnosis Two patients with AD II osteopetrosis sustained subtrochanteric fractures after a fall. Interventions IMN was performed through the sequential use of instruments such as a 4.9-mm drill bit, small reamer, and larger reamer for over-reaming. Outcomes In the first case, IMN left some gap at the fracture site. Dynamization was performed to treat the delayed union at 6 months postoperatively. The fracture healed at 10 months after the dynamization. In the second case, IMN was successful without a gap, and the fracture healed at 8 months. Lessons Although IMN is difficult to perform owing to partial obliteration of the medullary canal in AD II osteopetrosis, it can be performed with sequential widening of the medullary canal using various instruments. In addition, the fracture gap should not be left uncorrected during IMN to attain fracture union.

Case We report a case of acute gouty arthritis-mimicking infection that occurred immediately after right total knee arthroplasty in a 73-year-old man. Repetitive laboratory tests showed acute inflammation and did not easily distinguish acute gout from bacterial infection. Surgical treatment was undertaken for diagnostic and therapeutic purposes. A large amount of chalky whitish crystals suggestive of acute gout was found in both knees without the suspicion of bacterial infection, and thorough irrigation and debridement were performed. Conclusions Although conservative treatment is generally administered for acute gouty arthritis, early surgical intervention may ensure a good clinical result in a prosthetic joint.

Background: The literature has seldom investigated the anterior cruciate ligament (ACL) tunnel position while considering the effect of rotation of 3-dimensional computed tomography (3D-CT) images during measurements. Hypothesis: We hypothesized that (1) measurement of the ACL tunnel position in the femur and tibia through use of 3D-CT is considerably influenced by rotation of the 3D model and (2) there exists a reliable measurement method for ACL tunnel position least affected by rotation. Study Design: Controlled laboratory study. Methods: The 3D-CT images of 30 randomly selected patients who underwent single-bundle ACL reconstruction were retrospectively reviewed. For femoral tunnel assessments, rectangular reference frames were used that involved the highest point of the intercondylar notch and outer margins of the lateral femoral condyle (method 1), the highest point of the intercondylar notch and outer margins of the lateral wall of the intercondylar notch (method 2), and the lowest point of the intercondylar notch and outer margins of the lateral femoral condyle (method 3). For tibial tunnel assessments, rectangular reference frames with the cortical outline at the articular surface of the tibia (method A) and the cortical outline of the proximal tibia (method B) were used. For both femoral and tibial assessments, the tunnel positions at 5°, 10°, and 15° of rotation of the 3D model were compared with that at a neutral position. Results: The values measured by methods 1 and 3 showed significant differences at greater than 5° of rotation compared with the value at the neutral position, whereas method 2 showed relatively consistent results. However, the values measured with both methods A and B showed significant differences at greater than 5° of rotation compared with the value at the neutral position. Conclusion: The tunnel position on 3D-CT images was significantly influenced by rotation during measurements. For femoral tunnel position, measurement with a reference frame using the lateral wall of the intercondylar notch (method 2) was the least affected by rotation, with relatively consistent results. Clinical Relevance: This study demonstrates that measurement using the lateral wall of the intercondylar notch might be a consistent and reliable method for evaluating the ACL femoral tunnel position considering the effect of 3D-CT image rotation during measurements. However, both methods to measure tibial tunnel position described in this study were similarly affected by rotation.

Pneumocephalus is a condition which usually results from head trauma. It has been known that iatrogenic pneumocephalus can occur as a complication of positive pressure mask ventilation during induction of anesthesia or ventilatory care for head trauma patients. We report a case of mask ventilation during anesthesia induction in a 50-year-old male patient with head trauma. Initial pneumocephalus associated with cerebrospinal fluid leakage was diagnosed immediate following head injury involving facial sinuses. He was managed with emergent lumbar drainage and supportive care. Pneumocephalus recurred following positive pressure mask ventilation (PPMV) during anesthesia induction for surgery on the right arm. Recurred pneumocephalus was managed with high flow oxygen and supportive care. Anesthesiologists should be aware of pneumocephalus as a potential complication of PPMV in head trauma patients, even after resolution of previous pneumocephalus.

The objective of this research work is to design optimally dies and the blank sheet for manufacturing of the back panel of a PDP TV. The influence of design parameters of the dies and the blank sheet on the formation of wrinkling in the upper trimming area of the stamped part has been quantitatively investigated through three-dimensional elasto-plastic finite element analysis. The corner radius of the upper trimming area of the die and the blank gap, which is the distance from the outer line of the blank holder to that of the blank, have been chosen as design parameters to remove wrinkling associated with a stamping part in a upper trimming area. From the results of the analyses, it has been shown that a product without wrinkles and skid lines can be manufactured when the corner radius is 8 mm and the blank gap is 60 mm. Several stamping tests have been performed using the manufactured die set and the blank sheet according to the proposed optimum design. From the results of the stamping tests, it has been shown that a back panel of the PDP TV can be successfully manufactured using the proposed optimum design condition.

Purpose To quantify and compare the footprint contact area and interface pressure on the greater tuberosity between knotless and knot-tying transosseous-equivalent (TOE) repair using pressure-sensitive film. Methods We used 11 pairs of fresh-frozen cadaveric shoulders (22 specimens), in which rotator cuff tears were created before repair. Each pair was randomized to either conventional medial knot-tying TOE repair (group A) or medial knotless TOE repair using the modified Mason-Allen technique (group B). Pressure-sensitive film was used to quantify the pressurized contact area and interface pressure between the greater tuberosity and supraspinatus tendon. Results The mean pressurized contact area was 33.2 ± 2.5 mm 2 for group A and 28.4 ± 2.4 mm 2 for group B. There was a significant difference between groups ( P = .005). Although the overall contact configuration of both groups was similar and showed an M shape, group A showed a greater pressurized configuration around the medial row. The mean interface pressure was 0.20 ± 0.02 MPa for group A and 0.17 ± 0.02 MPa for group B. There was a significant difference between groups ( P = .001). Conclusions Contrary to our hypothesis, in this time-zero study, medial knotless TOE repair using a modified Mason-Allen suture produced a significantly inferior footprint contact area and interface pressure compared with conventional medial knot-tying TOE repair. Clinical Relevance Even though we found a statistically significant difference between the 2 repair methods, it is still unknown if this statistical difference seen in our study has any clinical and radiologic significance.