Search

Melanogenesis is the production of melanin from tyrosine by a series of enzyme-catalyzed reactions, in which tyrosinase and DOPA oxidase play key roles. The melanin content in the skin determines skin pigmentation. Abnormalities in skin pigmentation lead to various skin pigmentation disorders. Recent research has shown that the expression of EMP2 is much lower in melanoma than in normal melanocytes, but its role in melanogenesis has not yet been elucidated. Therefore, we investigated the role of EMP2 in the melanogenesis of MNT1 human melanoma cells. We examined TRP-1, TRP-2, and TYR expression levels during melanogenesis in MNT1 melanoma cells by gene silencing of EMP2. Western blot and RT-PCR results confirmed that the expression levels of TYR and TRP-2 were decreased when EMP2 expression was knocked down by EMP2 siRNA in MNT1 cells, and these changes were reversed when EMP2 was overexpressed. We verified the EMP2 gene was knocked out of the cell line (EMP2 CRISPR/Cas9) by using a CRISPR/Cas9 system and found that the expression levels of TRP-2 and TYR were significantly lower in the EMP2 CRISPR/Cas9 cell lines. Loss of EMP2 also reduced migration and invasion of MNT1 melanoma cells. In addition, the melanosome transfer from the melanocytes to keratinocytes in the EMP2 KO cells cocultured with keratinocytes was reduced compared to the cells in the control coculture group. In conclusion, these results suggest that EMP2 is involved in melanogenesis via the regulation of TRP-2 expression.

Probiotics have demonstrated their high potential to treat and/or prevent various diseases including neurodegenerative disorders, cancers, cardiovascular diseases, and inflammatory diseases. Probiotics are also effective against multidrug-resistant pathogens and help maintain a balanced gut microbiota ecosystem. Accordingly, the global market of probiotics is growing rapidly, and research efforts to develop probiotics into therapeutic adjuvants are gaining momentum. However, because probiotics are living microorganisms, many biological and biopharmaceutical barriers limit their clinical application. Probiotics may lose their activity in the harsh gastric conditions of the stomach or in the presence of bile salts. Moreover, they easily lose their viability under thermal or oxidative stress during their preparation and storage. Therefore, stable formulations of probiotics are required to overcome the various physicochemical, biopharmaceutical, and biological barriers and to maximize their therapeutic effectiveness and clinical applicability. This review provides an overview of the pharmaceutical applications of probiotics and covers recent formulation approaches to optimize the delivery of probiotics with particular emphasis on various dosage forms and formulation technologies.

This study was conducted to develop a lipid/clay-based solid dispersion (LSD) formulation to enhance the dissolution and oral bioavailability of poorly soluble curcumin. Krill oil and aminoclay were used as a lipid and a stabilizer, respectively, and LSD formulations of curcumin were prepared by an antisolvent precipitation method combined with freeze-drying process. Based on the dissolution profiles, the optimal composition of LSD was determined at the weight ratio of curcumin: krill oil: aminoclay of 1:5:5 in the presence of 0.5% of D-α-tocopherol polyethylene glycol succinate. The structural and morphological characteristics of the LSD formulation were determined using X-ray powder diffraction, differential scanning calorimetry, and scanning electron microscopy. Crystalline curcumin was changed to an amorphous form in the LSD formulation. At the pH of acidic to neutral, the LSD formulation showed almost complete drug dissolution (>90%) within 1 h, while pure curcumin exhibited minimal dissolution of less than 10%. Furthermore, the LSD formulation had significantly improved oral absorption of curcumin in rats, where Cmax and AUC of curcumin were 13- and 23-fold higher for the LSD formulation than for the pure drug. Taken together, these findings suggest that the krill oil-based solid dispersion formulation of curcumin effectively improves the dissolution and oral bioavailability of curcumin.

Pneumorrhachis (PR) is a rare radiological condition characterized by the presence of intraspinal air. PR is commonly classified as spontaneous (nontraumatic), traumatic, or iatrogenic, and iatrogenic PR is the most common and often occurs secondary to invasive procedures such as epidural anesthesia, lumbar puncture, or spinal surgery. PR is usually asymptomatic, but it can produce symptoms associated with its underlying pathology. Here, we report a rare case of intramedullary cervical PR following a cervical epidural steroid injection (ESI) and include pertinent discussion.

This study aimed to develop a solid dispersion (SD) of MT-102, a new anti-inflammatory agent, to improve its oral bioavailability. The ternary SD formulations of MT-102 (a poorly soluble extract of Isatis indigotica and Juglans mandshurica) were prepared using a solvent evaporation method with various drug/excipient ratios. Following that, the effectiveness of various SDs as an oral formulation of MT-102 was investigated using indirubin as a marker component. By forming SDs with hydrophilic polymers, the aqueous solubility of indirubin was significantly increased. SD-F4, containing drug, poloxamer 407 (P407), and povidone K30 (PVP K30) at a 1:2:2 weight ratio, exhibited the optimal dissolution profiles in the acidic to neutral pH range. Compared to pure MT-102 and a physical mixture, SD-F4 increased indirubin’s dissolution from MT-102 by approximately 9.86-fold and 2.21-fold, respectively. Additionally, SD-F4 caused the sticky extract to solidify, resulting in improved flowability and handling. As a result, compared to pure MT-102, the oral administration of SD-F4 significantly improved the systemic exposure of MT-102 in rats. Overall, the ternary SD formulation of MT-102 with a blended mixture of P407 and PVP K30 appeared to be effective at improving the dissolution and oral absorption of MT-102.

Background There is a strong need for non-invasive and patient-friendly delivery systems of protein drugs for long-term therapy. However, oral delivery of protein drugs is a big challenge due to many barriers including instability in the gastrointestinal (GI) tract and low permeability. To overcome the absorption barriers in GI tract and improve the patient compliance, this study aimed to develop an M cell targeted-nanocomposite delivery system of protein drugs. Results An aminoclay-protein core complex (AC-Ins) was prepared by using insulin as a model protein and then sequentially coated with Ulex europaeus agglutinin 1 (UEA-1) for M-cell targeting and the pH sensitive polymer, Eudragit® L100 (EUAC-Ins). All nanoparticles were obtained with a high entrapment efficiency (> 90%) and their structural characteristics were confirmed by Fourier transform-infrared spectroscopy, energy dispersive X-ray spectroscopy, and circular dichroism. Among the developed nanoparticles, EUAC-Ins effectively suppressed drug release at pH 1.2, while rapidly released drugs at pH 6.8 due to dissolution of the outer coating layer. The conformational stability of insulin entrapped in EUAC-Ins was well maintained in the presence of proteolytic enzymes. Compared to free insulin, EUAC-Ins increased the membrane transport of insulin by 4.4-fold in M cells. In parallel, oral administration of EUAC-Ins in mice enhanced insulin uptake by 4.1-fold in the intestinal Peyer’s patches and 2.6-fold in intestinal epithelium tissues with normal villi, compared to free insulin. Orally administered EUAC-Ins decreased significantly the blood glucose level in diabetic mice, while the effect of oral insulin solution was negligible. Conclusion An M cell targeted-ternary nanocomposite system obtained by dual coating of the aminoclay-protein core complex with UEA-1 and a pH dependent polymer is promising as an effective oral protein delivery carrier.

Advanced or metastatic breast cancer affects multiple organs and is a leading cause of cancer-related death. Cancer metastasis is associated with epithelial-mesenchymal metastasis (EMT). However, the specific signals that induce and regulate EMT in carcinoma cells remain unclear. PRR16/Largen is a cell size regulator that is independent of mTOR and Hippo signalling pathways. However, little is known about the role PRR16 plays in the EMT process. We found that the expression of PRR16 was increased in mesenchymal breast cancer cell lines. PRR16 overexpression induced EMT in MCF7 breast cancer cells and enhances migration and invasion. To determine how PRR16 induces EMT, the binding proteins for PRR16 were screened, revealing that PRR16 binds to Abl interactor 2 (ABI2). We then investigated whether ABI2 is involved in EMT. Gene silencing of ABI2 induces EMT, leading to enhanced migration and invasion. ABI2 is a gene that codes for a protein that interacts with ABL proto-oncogene 1 (ABL1) kinase. Therefore, we investigated whether the change in ABI2 expression affected the activation of ABL1 kinase. The knockdown of ABI2 and PRR16 overexpression increased the phosphorylation of Y412 in ABL1 kinase. Our results suggest that PRR16 may be involved in EMT by binding to ABI2 and interfering with its inhibition of ABL1 kinase. This indicates that ABL1 kinase inhibitors may be potential therapeutic agents for the treatment of PRR16-related breast cancer.

The solubility of glibenclamide was evaluated in DMSO, NMP, 1,4-dioxane, PEG 400, Transcutol® HP, water, and aqueous mixtures (T = 293.15~323.15 K). It was then recrystallized to solvate and compressed into tablets, of which 30-day stability and dissolution was studied. It had a higher solubility in 1,4-dioxane, DMSO, NMP (Xexp = 2.30 × 103, 3.08 × 104, 2.90 × 104) at 323.15 K, its mixture (Xexp = 1.93 × 103, 1.89 × 104, 1.58 × 104) at 298.15 K, and 1,4-dioxane (w) + water (1−w) mixture ratio of w = 0.8 (Xexp = 3.74 × 103) at 323.15 K. Modified Apelblat (RMSD ≤ 0.519) and CNIBS/R-K model (RMSD ≤ 0.358) suggested good comparability with the experimental solubility. The minimum value of ΔG° vs ΔH° at 0.70 < x2 < 0.80 suggested higher solubility at that molar concentration. Based on the solubility, it was recrystallized into the solvate, which was granulated and compressed into tablets. Among the studied solvates, the tablets of glibenclamide dioxane solvate had a higher initial (95.51%) and 30-day (93.74%) dissolution compared to glibenclamide reference (28.93%). There was no stability issue even after granulation, drying, or at pH 7.4. Thus, glibenclamide dioxane solvate could be an alternative form to improve the molecule’s properties.

This study aimed to develop a pH-responsive folic acid-grafted organic/inorganic hybrid nanocomposite system for site-selective oral delivery of therapeutic antibodies. A folic acid-grafted aminoclay (FA-AC) was prepared

Although 3-aminopropyl functionalized magnesium phyllosilicate nanoparticles (hereafter aminoclay nanoparticles, ACNs) are well-known nanomaterials employed as drug carriers, their effects on immune cells remain unclear. To address this issue, we explored murine dendritic cells (DCs) as these cells belong to the innate arm of the immune system and function as antigen-presenting cells to elicit adaptive immune responses. We examined the in vitro effects of ACNs on DCs isolated from B6 mice. ACN treatment significantly down-regulated the expression of inflammasome-related markers, including NLRP3, caspase-1, and IL1β. The ACNs-induced anti-inflammatory DC phenotype was further confirmed by down-regulation of the AKT/mTOR/HIF1α signaling pathway. Such anti-inflammatory effects of ACNs on DCs occurred independently of DC subtypes. To document the effects of ACNs on DCs more clearly, we examined their anti-inflammatory effects on lipopolysaccharide (LPS)-activated DCs. As expected, excessive inflammatory responses (increased mitochondrial ROS and Th1-type cytokines such as IL12 and IL1β) of LPS-activated DCs were dramatically attenuated by ACN treatment. Furthermore, ACNs down-regulated IFNγ production by antigen-specific CD4+ T cells, which is consistent with a reduced inflammatory phenotype of DCs. Overall, our results provide support for employing ACNs as drug delivery materials with therapeutic potential to control inflammatory disorders.

ARG2 has been reported to inhibit autophagy in vascular endothelial cells and keratinocytes. However, studies of its mechanism of action, its role in skin fibroblasts, and the possibility of promoting autophagy and inhibiting cellular senescence through ARG2 inhibition are lacking. We induced cellular senescence in dermal fibroblasts by using H2O2. H2O2-induced fibroblast senescence was inhibited upon ARG2 knockdown and promoted upon ARG2 overexpression. The microRNA miR-1299 suppressed ARG2 expression, thereby inhibiting fibroblast senescence, and miR-1299 inhibitors promoted dermal fibroblast senescence by upregulating ARG2. Using yeast two-hybrid assay, we found that ARG2 binds to ARL1. ARL1 knockdown inhibited autophagy and ARL1 overexpression promoted it. Resolvin D1 (RvD1) suppressed ARG2 expression and cellular senescence. These data indicate that ARG2 stimulates dermal fibroblast cell senescence by inhibiting autophagy after interacting with ARL1. In addition, RvD1 appears to promote autophagy and inhibit dermal fibroblast senescence by inhibiting ARG2 expression. Taken together, the miR-1299/ARG2/ARL1 axis emerges as a novel mechanism of the ARG2-induced inhibition of autophagy. Furthermore, these results indicate that miR-1299 and pro-resolving lipids, including RvD1, are likely involved in inhibiting cellular senescence by inducing autophagy.

Obesity is a lipid metabolism disorder caused by genetic, medicinal, nutritional, and other environmental factors. It is characterized by a complex condition of excess lipid accumulation in adipocytes. Adipogenesis is a differentiation process that converts preadipocytes into mature adipocytes and contributes to excessive fat deposition. Saikosaponin A (SSA) and saikosaponin D (SSD) are triterpenoid saponins separated from the root of the Bupleurum chinensis, which has long been used to treat inflammation, fever, and liver diseases. However, the effects of these constituents on lipid accumulation and obesity are poorly understood. We investigated the anti-obesity effects of SSA and SSD in mouse 3T3-L1 adipocytes. The MTT assay was performed to measure cell viability, and Oil Red O staining was conducted to determine lipid accumulation. Various adipogenic transcription factors were evaluated at the protein and mRNA levels by Western blot assay and quantitative reverse transcription polymerase chain reaction (qRT-PCR). Here, we showed that SSA and SSD significantly inhibited lipid accumulation without affecting cell viability within the range of the tested concentrations (0.938–15 µM). SSA and SSD also dose-dependently suppressed the expression of peroxisome proliferator-activated receptor gamma (PPARγ), CCAAT/enhancer binding protein alpha (C/EBPα), sterol regulatory element binding protein-1c (SREBP-1c), and adiponectin. Furthermore, the decrease of these transcriptional factors resulted in the repressed expression of several lipogenic genes including fatty acid binding protein (FABP4), fatty acid synthase (FAS), and lipoprotein lipase (LPL). In addition, SSA and SSD enhanced the phosphorylation of adenosine monophosphate-activated protein kinase (AMPK) and its substrate, acetyl-CoA carboxylase (ACC), and inhibited the phosphorylation of extracellular-regulated kinase 1/2 (ERK1/2) and p38, but not c-Jun-N-terminal kinase (JNK). These results suggest that SSA and SSD inhibit adipogenesis through the AMPK or mitogen-activated protein kinase (MAPK) pathways in the early stages of adipocyte differentiation. This is the first study on the anti-adipogenic effects of SSA and SSD, and further research in animals and humans is necessary to confirm the potential of saikosaponins as therapeutic agents for obesity.

AC1497 is an effective dual inhibitor of malate dehydrogenase 1 and 2 targeting cancer metabolism. However, its poor aqueous solubility results in low bioavailability, limiting its clinical development. This study was conducted to develop an effective self-nanoemulsifying drug delivery system (SNEDDS) of AC1497 to improve its oral absorption. Based on the solubility of AC1497 in various oils, surfactants, and cosurfactants, Capryol 90, Kolliphor RH40, and Transcutol HP were selected as the components of SNEDDS. After testing various weight ratios of Capryol 90 (20–30%), Kolliphor RH40 (35–70%), and Transcutol HP (10–35%), SNEDDS-F4 containing 20% Capryol 90, 45% Kolliphor RH40, and 35% Transcutol HP was identified as an optimal SNEDDS with a narrow size distribution (17.8 ± 0.36 nm) and high encapsulation efficiency (93.6 ± 2.28%). Drug release from SNEDDS-F4 was rapid, with approximately 80% of AC1497 release in 10 min while the dissolution of the drug powder was minimal (&lt, 2%). Furthermore, SNEDDS-F4 significantly improved the oral absorption of AC1497 in rats. The maximum plasma concentration and area under the plasma concentration–time curve of AC1497 were, respectively 6.82- and 3.14-fold higher for SNEDDS-F4 than for the drug powder. In conclusion, SNEDDS-F4 with Capryol 90, Kolliphor RH40, and Transcutol HP (20:45:35, w/w) effectively improves the solubility and oral absorption of AC1497.

Additional file 1: Figure S1. Confocal microscopy images of AC-Ins (A) and AC-Ins coated with FITC-labeled UEA-1 (B). Green signals represent the FITC-labeled UEA-1. Scale bar represents 2.5 µm. Figure S2. Deconvoluted amide I region of FT-IR spectra (A) and the secondary structure contents (B) of insulin released from different formulations after incubation at pH 6.8 for 8 h. Deconvolution of the amide I region of the spectra was performed by using Omnic software ver.1.08 (Thermo Fisher Scientific, Waltham, MA, USA). Secondary structure contents were assigned from deconvolution peak positions as alpha-helix at 1656 cm−1, random at 1647 cm−1, beta-sheet at 1630 cm−1, and beta-turn at 1677 cm−1. Figure S3. Effect of aminoclay and each formulation on cell viability in Caco-2 cells. Cytotoxic effects were determined after 48 h of incubation (mean ± SD, n = 3).

There is an increasing interest in natural products and their derivatives with therapeutic benefits and less side effects compared to steroid therapy. Benzofuran derivatives display biological effects including anti-inflammatory effects. The present study aims to investigate whether (3-(7-methoxy-2-p-tolyl benzofuran-5-yl) propan-1-ol) (DK-1108), new synthetic benzofuran compound exerts anti-asthmatic effects in vitro and in vivo. DK-1108 strongly reduced the production of inflammatory mediators, cytokines and chemokines in RAW264.7 and A549 cells. DK-1108 significantly regulated the levels of AKT/MAPKs/c-Jun activation, AP-1 luciferase activity and ICAM-1 expression. Furthermore, DK-1108 effectively suppressed the adhesion of A549 and EOL-1 cells. In OVA-induced asthmatic mice, DK-1108 decreased the levels of IL-5/IL-13/IgE production, eosinophils/macrophages influx, ICAM-1/MCP-1 expression, mucus secretion and airway hyperresponsiveness (AHR). These effects of DK-1108 were accompanied by downregulation of MAPKs activation. Therefore, we suggest that DK-1108 exerts protective effect against airway inflammation and mucus overproduction, and therefore could be valuable therapeutic agent for treatment in asthma.

Postsurgical hypoparathyroidism is the most common complication of thyroid surgery. Conventional therapy with high-dose calcium and vitamin D can correct hypocalcemia but can increase the risk of hypercalciuria, renal stones, or ectopic calcification. The aim of the present study was to investigate the efficacy of a calcium-sensing receptor antagonist, also called a calcilytic (AXT914), in rat models of postsurgical hypoparathyroidism. Two postsurgical hypoparathyroidism rat models were made by hemi-parathyroidectomy or total parathyroidectomy with autotransplantation in 10-week-old female Wistar rats. AXT914 or vehicle was administered orally for 2 to 3 weeks. Serum PTH, calcium, and phosphorus levels, and the urinary excretion of calcium were measured. Autotransplanted parathyroid tissues were collected and examined histologically. In the hemi-parathyroidectomy model, the oral administration of the calcilytic AXT914 (5 and 10 mg/kg) for 2 weeks increased serum PTH and calcium levels and decreased serum phosphorus levels and urinary calcium excretion. In the total parathyroidectomy with autotransplantation model, the oral administration of AXT914 (10 mg/kg) for 3 weeks increased serum PTH and calcium levels and decreased serum phosphorus levels. The serum PTH and calcium levels increased by AXT914 were maintained for 1 week, even after discontinuation of the drug. In conclusion, AXT914 increased PTH secretion in rat models of postsurgical hypoparathyroidism, thereby correcting abnormal calcium and phosphorus homeostasis. Furthermore, AXT914 improved the functional recovery of autotransplanted parathyroid tissues.

This study aimed to develop a ternary nanocomposite system of organoclay, glycol-chitosan, and Eudragit®S100 as an effective colon targeted drug delivery carrier to enhance the oral absorption of insulin. A nanocomplex of insulin and aminoclay was prepared via spontaneous co-assembly, which was then coated with glycol-chitosan and Eudragit S®100 (EGAC-Ins). The double coated nanocomplex, EGAC-Ins demonstrated a high entrapment efficiency of greater than 90% and a pH-dependent drug release. The conformational stability of insulin entrapped in EGAC-Ins was effectively maintained in the presence of proteolytic enzymes. When compared to a free insulin solution, EGAC-Ins enhanced drug permeability by approximately sevenfold in Caco-2 cells and enhanced colonic drug absorption in rats. Accordingly, oral EGAC-Ins significantly reduced blood glucose levels in diabetic rats while the hypoglycemic effect of an oral insulin solution was negligible. In conclusion, EGAC-Ins should be a promising colonic delivery system for improving the oral absorption of insulin.

3-Aminopropyl functionalized magnesium phyllosilicate (aminoclay) is a tailor-made organoclay material that has many biomedical applications. Defining the biodistribution and in vivo pharmacokinetics of aminoclay is essential to gauge the therapeutic potential of aminoclay. Therefore, the present study investigated the in vivo fate of aminoclay nanoparticles in a mouse model. Fluorescent Cy5.0-conjugated-aminoclay (Cy5.0-aminoclay) was synthesized for optical imaging and quantification in vivo and then its tissue distribution as well as elimination pathways was investigated in mice. After intravenous administration, fast tissue distribution of Cy5.0-aminoclay into various organs including the liver, kidney, lung, heart, and intestine was evident, as was the rapid clearance from each organ without any long-term accumulation. In addition, systemically administered nanoparticles were eliminated mainly from the urine and feces, where the nearly complete recovery of administered dose was achieved within 72 h. After oral administration, the biodistribution and pharmacokinetic studies indicated no intestinal absorption of Cy5.0-aminoclay. Consequently, about 90% of orally administered nanoparticles were eliminated via feces within 24 h. Taken all together, the present study highlights the low risk for long-term tissue accumulation of aminoclay particles, which may be desirable attributes for biomedical applications as a drug delivery carrier.

Background: Chrysin is a strong inhibitor of breast cancer resistance protein (BCRP) but it is practically insoluble in water. Effective solubilization of chrysin is critical for its pharmaceutical application as an absorption enhancer via inhibition of BCRP-mediated drug efflux. Objective: This study aimed to develop an effective oral formulation of chrysin to improve its in vivo effect as an absorption enhancer. Method: Solid dispersions (SDs) of chrysin were prepared with hydrophilic carriers having surface acting properties and a pH modulator. In vitro and in vivo characterizations were performed to select the optimal SDs of chrysin. Results: SDs with Brij&®L4 and aminoclay was most effective in increasing the solubility of chrysin by 13-53 fold at varying drug-carrier ratios. Furthermore, SDs significantly improved the dissolution rate and extent of drug release. SDs (chrysin: Brij&®L4: aminoclay=1:3:5) achieved approximately 60% and 83% drug release within 1 h and 8 h, respectively, in aqueous medium, while the dissolution of the untreated chrysin was less than 13%. XRD patterns indicated the amorphous state of chrysin in SDs. The SD formulation was effective in improving the bioavailability of topotecan, a BCRP substrate in rats. Following oral administration of topotecan with the SDs of chrysin, the Cmax and AUC of topotecan was enhanced by approximately 2.6- and 2-fold, respectively, while the untreated chrysin had no effect. Conclusion: The SD formulation of chrysin with Brij&®L4 and aminoclay appeared to be promising in improving the dissolution of chrysin and enhancing its in vivo effect as an absorption enhancer.

This study aimed to design an effective formulation for enhancing the tumor-targeted delivery of sorafenib. Three sorafenib-loaded liposomal formulations including uncoated liposome (SF-Lip), hyaluronic acid-coated liposome (HA-SF-Lip), and PEGylated hyaluronic acid-coated liposome (PEG-HA-SF-Lip) were developed with narrow size distribution and high encapsulation efficiency. The cellular uptake and cytotoxicity of HA-SF-Lip and PEG-HA-SF-Lip were greater than those of SF-Lip in MDA-MB-231 cells overexpressing CD44, whereas there were no significant differences in MCF-7 cells with low CD44 expression, indicating the CD44-mediated cellular uptake of coated liposomes. In comparison with sorafenib solution, PEG-HA-SF-Lip increased the systemic exposure and plasma half-life in rats by 3-fold and 2-fold, respectively. Consistently, PEG-HA-SF-Lip was the most effective for tumor growth inhibition through CD44 targeting in the MDA-MB-231 tumor xenograft mouse model. Taken together, the present study suggests that PEG-HA-SF-Lip might be effective for the tumor-targeted delivery of sorafenib with enhanced systemic exposure and longer blood circulation.

Nanomedicines have evolved into various forms including dendrimers, nanocrystals, emulsions, liposomes, solid lipid nanoparticles, micelles, and polymeric nanoparticles since their first launch in the market. Widely highlighted benefits of nanomedicines over conventional medicines include superior efficacy, safety, physicochemical properties, and pharmacokinetic/pharmacodynamic profiles of pharmaceutical ingredients. Especially, various kinetic characteristics of nanomedicines in body are further influenced by their formulations. This review provides an updated understanding of nanomedicines with respect to delivery and pharmacokinetics. It describes the process and advantages of the nanomedicines approved by FDA and EMA. New FDA and EMA guidelines will also be discussed. Based on the analysis of recent guidelines and approved nanomedicines, key issues in the future development of nanomedicines will be addressed.

Proteins have many therapeutic advantages over small synthetic drugs in terms of their high specificity and activity. Accordingly, the global biopharmaceutical market grows rapidly and has driven the continuous increase of R&D investment in protein-based drug products, thus the number of approved protein drugs also continuously increases. However, during their manufacture, transport, and storage, proteins are often exposed to various detrimental environments that can cause protein destabilization, resulting in undesirable drug properties such as partial or complete loss of biological activity, altered solubility, and immunogenicity. Therefore, the thorough evaluation/monitoring and optimization of process variables and product formulations are critical to ensure product quality during its appropriate shelf-life. However, because of (i) the complexity of protein structures, (ii) multiple degradation pathways, and (iii) various intrinsic and extrinsic factors that can affect the stability, protein stabilization is not straightforward and remains a big challenge in the clinical development and commercialization of protein-based drug products, although significant progress has been made. Considering that a better understanding of the various instability mechanisms and factors is important for the quality control of protein drug products and their successful clinical usage, this review briefly overviews protein destabilization pathways and deals with general issues such as controlling the factors of protein stabilization, especially during manufacturing, shipping and storage.

This study aimed to develop a new colon-targeted drug delivery system via the preparation of ternary nanocomposite carriers based on organic polymer, aminoclay and lipid vesicles. Budesonide (Bud), an anti-inflammatory drug was chosen as a model drug and encapsulated into three different formulations: liposome (Bud-Lip), aminoclay-coated liposome (AC-Bud-Lip), and Eudragit® S100-aminoclay double coated liposome (EAC-Bud-Lip). The formation of the aminoclay-lipid vesicle nanocomposite was confirmed by energy dispersive X-ray spectrum, transmission electron microscopy, and Fourier-transform infrared spectroscopy. All formulations were produced with a high encapsulation efficiency in a narrow size distribution. Drug release from EAC-Bud-Lip was approximately 10% for 2-h incubation at pH 1.2, implying the minimal drug release in acidic gastric condition. At pH 7.4, EAC-Bud-Lip underwent significant size reduction and exhibited drug release profiles similar to that from AC-Bud-Lip, implying the pH-dependent removal of the outer coating layer. Compared to free Bud solution, EAC-Bud-Lip achieved a higher drug uptake in Caco-2 cells and exhibited a stronger inhibition of TNF-α and IL-6 secretion in LPS-stimulated Raw264.7 cells. Furthermore, a bio-distribution study in mice demonstrated that Eudragit® S100-aminoclay dual coating led to a higher colonic distribution with a longer residence time, which correlated well with the delayed systemic drug exposure in rats. Taken together, the present study suggests that the ternary nanocomposite carrier consisting of Eudragit® S100, aminoclay, and lipid vesicle might be useful as an effective colon-targeted drug delivery system.

The acid lability of rosuvastatin hinders the preparation of mixed combination formulations of rosuvastatin with acidic drugs such as clopidogrel. Therefore, the purpose of this study was to develop a multilayer-coated tablet that avoids physicochemical interactions between rosuvastatin and clopidogrel. Among the tested hydrophobic materials, glyceryl behenate was most effective at inhibiting the production of lactone, the acid degradation product of rosuvastatin. Therefore, the multilayer-coated tablet included a hydrophobic separation layer consisting of glyceryl behenate between the clopidogrel core tablet and the rosuvastatin coating layer. In order to prevent delayed dissolution by the stable hydrophobic separation layer, crospovidone was added into the clopidogrel core tablet as an effective disintegrant. Copovidone was also added to the coating layer of rosuvastatin, achieving a dissolution profile comparable to that of the reference drug, Crestor®. The resulting multilayer-coated tablet exhibited similar pharmacokinetic profiles to those of reference drugs (Plavix® and Crestor®) in beagle dogs, and there was no statistically significant difference in the maximum plasma concentration (Cmax), the time to reach the maximum plasma concentration (Tmax), or the area under the plasma-concentration time curve (AUC) between the test and reference formulations. The storage stability tests showed that the amounts of acid degradation products and total impurities were comparable to that of the reference drug. In conclusion, the present study successfully developed a stable multilayer-coated tablet containing both clopidogrel and rosuvastatin that may improve the patient compliance in combination therapy for cardiovascular diseases.

Advancements in biotechnology and protein engineering expand the availability of various therapeutic proteins including vaccines, antibodies, hormones, and growth factors. In addition, protein drugs hold many therapeutic advantages over small synthetic drugs in terms of high specificity and activity. This has led to further R&D investment in protein-based drug products and an increased number of drug approvals for therapeutic proteins. However, there are many biological and biopharmaceutical obstacles inherent to protein drugs including physicochemical and enzymatic destabilization, which limit their development and clinical application. Therefore, effective formulations of therapeutic proteins are needed to overcome the various physicochemical and biological barriers. In current medical practice, protein drugs are predominantly available in injectable formulations, which have disadvantages including pain, the possibility of infection, high cost, and low patient compliance. Consequently, non-invasive drug delivery systems for therapeutic proteins have gained great attention in the research and development of biomedicines. Therefore, this review covers the various formulation approaches to optimizing the delivery properties of protein drugs with an emphasis on improving bioavailability and patient compliance. It provides a comprehensive update on recent advancements in nanotechnologies with regard to non-invasive protein drug delivery systems, which is also categorized by the route of administrations including oral, nasal, transdermal, pulmonary, ocular, and rectal delivery systems., Graphical Abstract Unlabelled Image

LW6 (3-[2-(4-adamantan-1-yl-phenoxy)-acetylamino]-4-hydroxy-benzoic acid methyl ester) is a potent inhibitor of drug efflux by the breast cancer resistance protein (BCRP). However, its poor aqueous solubility leads to low bioavailability, which currently limits in vivo applications. Therefore, the present study aimed to develop ternary solid dispersion (SD) formulations in order to enhance the aqueous solubility and dissolution rate of LW6. Various SDs of LW6 were prepared using a solvent evaporation method with different drug/excipient ratios. The solubility and dissolution profiles of LW6 in different SDs were examined, and F8-SD which is composed of LW6, poloxamer 407, and povidone K30 at a weight ratio of 1:5:8 was selected as the optimal SD. The structural characteristics of F8-SD were also examined using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray powder diffraction (XRPD), and scanning electron microscopy (SEM). In the acidic to neutral pH range, F8-SD achieved rapid dissolution with a drug release of 76&ndash, 81% within 20 min, while the dissolution of pure LW6 was negligible. The XRPD patterns indicated that F8-SD probably enhanced the solubility and dissolution of LW6 by changing the drug crystallinity to an amorphous state, in addition to the solubilizing effect of the hydrophilic carriers. Furthermore, F8-SD significantly improved the oral bioavailability of topotecan, which is a BCRP substrate, in rats. The systemic exposure of topotecan was enhanced approximately 10-fold by the concurrent use of F8-SD. In conclusion, the ternary SD formulation of LW6 with povidone K30 and poloxamer 407 appeared to be effective at improving the dissolution and in vivo effects of LW6 as a BCRP inhibitor.

Electrostatic complexation of adenovirus (Ad) with cationic lipids or polymers has been shown to be an effective means for overcoming the limitations of adenoviral vectors and enhancing gene-transfer efficacy. However, such complexation causes cytotoxicity, limiting the use of this strategy. The present study explored the potential of 3-aminopropyl functionalized magnesium phyllosilicate (aminoclay) as a cationic vehicle for improving Ad-mediated gene transfer without inducing cytotoxicity. Aminoclay complexation produced a dose-dependent increase in Ad-mediated transgene expression in both Ad infection-sensitive and -refractory cells, thereby greatly lowering the Ad dose required for transgene expression. Unlike the case for cationic lipids (Lipofectamine) or polymers (Polybrene), the enhancement effect of aminoclay was not accompanied by significant cytotoxicity regardless of cell lines and it was not observed for nonviral plasmid vectors. Physical characterization studies revealed that nanobiohybrid complexes formed between aminoclay and Ad particles through electrostatic interactions, creating aggregates of Ad particles whose surface was shielded with aminoclay nanosheet oligomers. It appears that aminoclay complexation changes the surface charge of Ad particles from a negative to a highly positive value and thus increases Ad binding to cellular membranes, thereby providing an additional cellular entry mechanism, namely caveolae-dependent endocytosis. Aminoclay-Ad nanobiohybrids may serve as a next-generation efficient, versatile and biocompatible gene-delivery carrier. Statement of Significance Electrostatic complexation of adenovirus with cationic materials has been shown to be an effective means for enhancing gene-transfer efficacy in vitro. However, such complexation causes cytotoxicity, limiting the use of this strategy. The present study explored the potential of a synthesized organoclay 3-aminopropyl functionalized magnesium phyllosilicate (aminoclay) as a cationic vehicle for improving Ad-mediated gene transfer. Our data indicate that nanobiohybrid complexes form between aminoclay and Ad particles through electrostatic interactions, thereby greatly enhancing Ad-mediated gene transfer. Unlike the case for either cationic lipids or cationic polymers, the enhancement effect of aminoclay was not accompanied by significant cytotoxicity regardless of cell lines. Our findings in this work highlight that aminoclay-Ad nanobiohybrids may serve as a next-generation efficient and biocompatible gene-delivery carrier.

Jae Geun Song, Sang Hoon Lee, Hyo-Kyung Han College of Pharmacy, Dongguk University, Goyang, South Korea Abstract: This study aimed to evaluate aminoclay (3-aminopropyl-functionalized magnesium phyllosilicate) as an effective protectant for the stabilization of protein formulation in freeze-drying. Bovine serum albumin (BSA), as a model protein, was freeze-dried with aminoclay at various concentrations, and the effects of aminoclay on the structural stability of proteins were compared with those of the conventional stabilizers. The structural characteristics of the protein were determined by size exclusion chromatography (SEC), circular dichroism (CD), and Fourier transform infrared (FTIR) spectroscopy. Furthermore, physicochemical and morphological characteristics were examined by X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). XRPD and DSC patterns indicated that the glass transition temperature (Tg) of the amorphous formulation of aminoclay mixed with proteins was gradually elevated as the concentration of aminoclay increased. FTIR and CD spectral analysis suggested that the protein structure was well maintained with aminoclay during the freeze-drying process and 3months of storage at 4°C and 40°C. Furthermore, aminoclay conferred the greatest protection against aggregation and retained the monomer content of BSA even at a high temperature. The morphological characteristics of lyophilized proteins were also well conserved during the storage with aminoclay. These results suggested that aminoclay may be useful as an alternative stabilizer for maintaining the structural stability of protein formulations. Keywords:aminoclay, cryoprotectant, lyoprotectant, freeze-drying, protein, stability

The present study aimed to discover a new potent BCRP inhibitor overcoming multidrug resistance. Effects of LW6 on the functional activity and gene expression of two major efflux transporters, BCRP and P-gp, were evaluated by using MDCKII cells overexpressing each transporter (MDCKII-BCRP and MDCKII-MDR1). Its effects on the cytotoxicity and pharmacokinetics of co-administered anticancer drugs were also evaluated in transfected cells and rats, respectively. In MDCKII-BCRP cells overexpressing BCRP, LW6 enhanced significantly (p

The present study aimed to examine the potential pharmacokinetic drug interaction between valsartan and gemfibrozil. Compared with the control given valsartan (10 mg/kg) alone, the concurrent use of gemfibrozil (10 mg/kg) significantly (p

Docetaxel (DTX)-loaded polymeric micelles (DTBM) were formulated using the triblock copolymer, poly(ethylene glycol)–polylactide–poly(ethylene glycol) (PEG–PLA–PEG), to comprehensively study their pharmaceutical application as anticancer nanomedicine. DTBM showed a stable formulation of anticancer nanomedicine that could be reconstituted after lyophilization (DTBM-R) in the presence of PEG 2000 and D-mannitol (Man) as surfactant and protectant, respectively. DTBM-R showed a particle size less than 150 nm and greater than 90% of DTX recovery after reconstitution. The robustly formed micelles might minimize systemic toxicity due to their sustained drug release and also maximize antitumor efficacy through increased accumulation and release of DTX from the micelles. From the pharmaceutical development point of view, DTBM-R showing successful reconstitution could be considered as a potent nanomedicine for tumor treatment.

Background Chrysin is a strong inhibitor of breast cancer resistance protein (BCRP) but it is practically insoluble in water. Effective solubilization of chrysin is critical for its pharmaceutical application as an absorption enhancer via inhibition of BCRP-mediated drug efflux. Objective This study aimed to develop an effective oral formulation of chrysin to improve its in vivo effect as an absorption enhancer. Method Solid dispersions (SDs) of chrysin were prepared with hydrophilic carriers having surface acting properties and a pH modulator. In vitro and in vivo characterizations were performed to select the optimal SDs of chrysin. Results SDs with Brij®L4 and aminoclay was most effective in increasing the solubility of chrysin by 13-53 fold at varying drug-carrier ratios. Furthermore, SDs significantly improved the dissolution rate and extent of drug release. SDs (chrysin: Brij®L4: aminoclay=1:3:5) achieved approximately 60% and 83% drug release within 1 h and 8 h, respectively, in aqueous medium, while the dissolution of the untreated chrysin was less than 13%. XRD patterns indicated the amorphous state of chrysin in SDs. The SD formulation was effective in improving the bioavailability of topotecan, a BCRP substrate in rats. Following oral administration of topotecan with the SDs of chrysin, the Cmax and AUC of topotecan was enhanced by approximately 2.6- and 2-fold, respectively, while the untreated chrysin had no effect. Conclusion The SD formulation of chrysin with Brij®L4 and aminoclay appeared to be promising in improving the dissolution of chrysin and enhancing its in vivo effect as an absorption enhancer.

A rapid, sensitive and selective liquid chromatography-tandem mass spectrometric method (LC-MS/MS) was developed for the quantification of biflorin in rat plasma. Using naringin as an internal standard, plasma samples were subjected to a direct protein precipitation process using methanol. Chromatographic separation was achieved on a Gemini C18 column with an isocratic mobile phase consisting of 0.1% formic acid and methanol (50:50, v/v) at a flow rate of 0.5mL/min. Biflorin was analyzed in the multiple reaction monitoring mode with negative electrospray ionization. The precursor/product ion pairs were m/z 353.0/205.0 and m/z 579.0/271.0 for biflorin and the IS, respectively. The calibration curve was linear over the concentration range of 5-2000ng/mL. The intra- and inter-day precision was less than 7.3% and the accuracy ranged from 96.5 to 103.3%. No significant variation was observed in the stability tests. This method was successfully applied to a pharmacokinetic study of biflorin after the intravenous and oral administration of biflorin to rats. The half-life and oral bioavailability of biflorin were determined as 3.4h and 43%, respectively. This is the first report on the quantitative determination of biflorin in rat plasma as well as the pharmacokinetic characterization of biflorin, which should provide a meaningful foundation for further preclinical and clinical applications of biflorin.

This study aimed to isolate a lignan-enriched fraction from Schisandra chinensis and improve the dissolution of biologically active lignans via solid dispersion (SD) formulation. Lignan-enriched fraction was obtained from a hexane-soluble extraction, being poorly soluble in water. To improve the dissolution of major lignans from these extracts, SD formulation of an isolated extract was prepared with different hydrophilic polymers. Among the tested carriers, poloxamer 407 was most effective in enhancing the release of active lignans from extract. Compared to the pure extract, poloxamer 407-based SD significantly increased the dissolution of nine active lignans (schisandrol A, gomisin J, schisandrol B, tigloylgomisin H, angeloylgomisin H, schisandrin A, schisandrin B, gomisin N, schisandrin C) by 1.6- to 300-fold in water. SD also lead to the solidification of sticky extract, providing better flowability and ease of handling. Collectively, poloxamer 407-based SD formulation appeared to be effective in enhancing the dissolution of the active lignans from S. Chinensis.

This study aimed to design the chitosan coated TPGS liposome to enhance the bioavailability of Coenzyme Q10 (CoQ10). Optimization of formulation variables for the preparation of the liposome was performed and then three liposomal formulations (TPGS-liposome, TPGS-chitosome, chitosome) were prepared with narrow size distribution and high encapsulation efficiency. All of three liposomal formulations were stable at pH 1.2 and 7.0 for 24h without any significant drug leakage. Furthermore, chitosan-coated liposomes showed the strong mucoadhesive properties. All the tested liposomal formulations significantly enhanced the cellular uptake of CoQ10 as compared to the untreated drug. Particularly, TPGS-chitosome appeared to be most effective in improving the cellular uptake of CoQ10 in Caco-2 cells (about 30-folds greater than the untreated powder formulation). In oral pharmacokinetic studies, TPGS-chitosome enhanced the systemic exposure of CoQ10 by 3.4 folds as compared to the untreated powder and also displayed the extended drug release profile for up to 24h in rats. Compared to the untreated powder CoQ10, TPGS-chitosome significantly improved the antioxidant effect of CoQ10 and reduced the intracellular ROS level. In conclusion, TPGS-chitosome significantly enhanced the oral bioavailability of CoQ10 and prolonged drug release profile in rats, suggesting that TPGS-chitosome could be an effective oral delivery platform to improve the oral bioavailability of poorly absorbable drugs.

A series of indole acrylamide derivatives were synthesized and evaluated for their inhibitory effects on hepatitis C virus (HCV) replication. Previously, we have identified (E)-N-(4-tert-butylphenyl)-3-(5-cyano-1H-indol-3-yl)-2-methylacrylamide (6c) as one of the promising leads for anti-HCV chemotherapy. Based on the structural features of indole acrylamide, we have explored extended structure–activity relationship study using analogs with substituted indoles, various amides, and N-substitution at the indole ring. Among the newly synthesized series, 5-cyanoindole acrylamide analog with N-acetyl substitution (13c) (EC50 = 0.98 μM, CC50 = 40.74 μM, and SI = 41.6) exhibited the most potent antiviral activity with reasonable cytotoxicity in a cell-based J6/JFH1 reporter assay using Huh7.5 cells. In addition, improved water solubility of 13c compared to 6c further merits consideration of 13c as a valuable candidate for anti-HCV therapeutics development.

This study aimed to design the effective formulation of sorafenib (SF) to enhance the oral drug absorption. Three liposomal formulations of SF were prepared including uncoated liposome (SF-Lip), glycol chitosan-coated liposome (GC-SF-Lip), and Eudragit S100-glycol-chitosan coated liposome (SGC-SF-Lip). All formulations showed a narrow size distribution with a high encapsulation efficiency. Both GC-SF-Lip and SGC-SF-Lip exhibited good stability at acidic and neutral pHs without any significant drug leakage, while SF-Lip appeared to be unstable at pH 1.2. In the case of double coated SGC-SF-Lip, its size changed significantly at pH 7.4, due to the dissolution of Eudragit S100 coating layer into the surrounding medium. Compared to SF solution, all liposomal formulations demonstrated a higher cellular uptake in Caco-2 cells. In particular, SGC-SF-Lip displayed a lower cellular uptake than GC-SF-Lip at pH 6.5, but it achieved a similar cellular uptake to GC-SF-Lip at pH 7.4. Consistently, SGC-SF-Lip was less cytotoxic than GC-SF-Lip at pH 6.5, whereas it showed a comparable cytotoxicity to GC-SF-Lip at pH 7.4, implying the removal of the Eudragit S100 coating layer at pH 7.4. After an oral administration to rats, SGC-SF-Lip significantly improved the systemic exposure of SF, where its Cmax and AUC were approximately fourfold higher than the untreated drug. Collectively, SGC-SF-Lip appeared to be promising to enhance the oral absorption of SF.