Search

Ion-exchange membranes (IEMs) are a core component that greatly affects the performance of electrochemical energy conversion processes such as reverse electrodialysis (RED) and all-vanadium redox flow battery (VRFB). The IEMs used in electrochemical energy conversion processes require low mass transfer resistance, high permselectivity, excellent durability, and also need to be inexpensive to manufacture. Therefore, in this study, thin-reinforced anion-exchange membranes with excellent physical and chemical stabilities were developed by filling a polyethylene porous substrate with functional monomers, and through in situ polymerization and post-treatments. In particular, the thin-reinforced membranes were made to have a high ion-exchange capacity and a limited degree of swelling at the same time through a double cross-linking reaction. The prepared membranes were shown to possess both strong tensile strength (>120 MPa) and low electrical resistance (

Poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) is a promising polymer material widely used for the production of ion-exchange membranes. In this study, quaternization was performed by reacting bromin...

Proton-exchange membrane fuel cells (PEMFCs) are the heart of promising hydrogen-fueled electric vehicles, and should lower their price and further improve durability. Therefore, it is necessary to enhance the performances of the proton-exchange membrane (PEM), which is a key component of a PEMFC. In this study, novel pore-filled proton-exchange membranes (PFPEMs) were developed, in which a partially fluorinated ionomer with high cross-linking density is combined with a porous polytetrafluoroethylene (PTFE) substrate. By using a thin and tough porous PTFE substrate film, it was possible to easily fabricate a composite membrane possessing sufficient physical strength and low mass transfer resistance. Therefore, it was expected that the manufacturing method would be simple and suitable for a continuous process, thereby significantly reducing the membrane price. In addition, by using a tri-functional cross-linker, the cross-linking density was increased. The oxidation stability was greatly enhanced by introducing a fluorine moiety into the polymer backbone, and the compatibility with the perfluorinated ionomer binder was also improved. The prepared PFPEMs showed stable PEMFC performance (as maximum power density) equivalent to 72% of Nafion 212. It is noted that the conductivity of the PFPEMs corresponds to 58–63% of that of Nafion 212. Thus, it is expected that a higher fuel cell performance could be achieved when the membrane resistance is further lowered.

In this work, we developed pore-filled ion-exchange membranes (PFIEMs) fabricated for the application to an all-vanadium redox flow battery (VRFB) by filling a hydrocarbon-based ionomer containing a fluorine moiety into the pores of a porous polyethylene (PE) substrate having excellent physical and chemical stabilities. The prepared PFIEMs were shown to possess superior tensile strength (i.e., 136.6 MPa for anion-exchange membrane, 129.9 MPa for cation-exchange membrane) and lower electrical resistance compared with commercial membranes by employing a thin porous PE substrate as a reinforcing material. In addition, by introducing a fluorine moiety into the filling ionomer along with the use of the porous PE substrate, the oxidation stability of the PFIEMs could be greatly improved, and the permeability of vanadium ions could also be significantly reduced. As a result of the evaluation of the charge–discharge performance in the VRFB, it was revealed that the higher the fluorine content in the PFIEMs was, the higher the current efficiency was. Moreover, the voltage efficiency of the PFIEMs was shown to be higher than those of the commercial membranes due to the lower electrical resistance. Consequently, both of the pore-filled anion- and cation-exchange membranes showed superior charge–discharge performances in the VRFB compared with those of hydrocarbon-based commercial membranes.

Recently, the interest in high-performance energy storage system (ESS) is increasing since it is a very essential part of the smart grid for stable and efficient electricity supply. At present, diverse battery technologies such as lithium ion batteries, redox flow batteries (RFBs), and sodium–sulfur batteries are competing with each other to be applied to commercial ESS. Among them, RFBs are considered to be the most promising for a large-scale ESS application. Meanwhile, all-vanadium redox flow batteries (VRBs) utilizing vanadium ions in different oxidation states as the active redox species have been considered as one of the most promising RFBs owing to the controlled crossover rate of the redox species through membranes. Since an ionomer membrane separator is one of the most dominant components determining the charge-discharge characteristics of RFB systems, the development of highly efficient membranes has been considered to be very essential for successful commercialization of VRBs. Among various kinds of membranes, pore-filled ion-exchange membranes (PFIEMs) fabricated by combining a porous substrate and an ionomer are known to have excellent characteristics including high chemical and dimensional stabilities, low manufacturing cost, low mass transfer resistance, etc. In this work, we have developed novel PFIEMs by using a polyethylene (PE)- or a polytetrafluoroethylene (PTFE)-based porous substrate for VRB applications. Especially, we have designed the filling ionomer to possess the high crosslinking degree and ion-exchange capacity, simultaneously. In addition, the prepared PFIEMs and the RFB employing them have been systematically analyzed by various electrochemical methods for evaluating their performances exactly. The detailed results will be presented and discussed at the conference. This work was supported by a grant (No.2017000140002/ RE201702218) from the Environmental Industry Advancement Technology Development Project of Korea Environmental Industry & Technology funded by Korea Ministry of Environment.

Ion exchange membranes (IEMs) have been widely employed in various water treatment processes such as electrodialysis for a desalination of sea or brackish water. Recently, they have also gained increased industrial importance in the applications to electrochemical energy conversion and storage processes such as reverse electrodialysis, fuel cells, and redox flow batteries. Their intrinsic properties such as electrical resistance and permselectivity are the key parameters dominating the electrochemical energy conversion efficiencies. The cost-effectiveness of ion-exchange membranes should also be considered for successful commercialization of the IEM process. In recent years, pore-filled IEMs (PFIEMs) in which an inert porous substrate provides excellent mechanical and chemical stabilities while a filling ionomer selectively transports ions through the membrane have been receiving great interests in the application to various separation and energy processes. In this work, we have investigated the optimum design parameters of the cost-effective PFIEMs for successful application to various IEM processes. In more detail, novel PFIEMs were successfully fabricated by combining a highly porous polymer (i.e. PTFE and PE) films and cationic polyelectrolytes with structurally stable anion-exchange sites for the applications to alkaline direct liquid fuel cells, all vanadium redox flow battery, and reverse electrodialysis. The prepared PFIEMs exhibited excellent electrochemical characteristics and stabilities and also remarkable energy conversion efficiencies have been achieved by employing them. Acknowledgments: This work was supported in part by the New & Renewable Energy Core Technology Program of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) granted financial resource from the Ministry of Trade, Industry & Energy, Republic of Korea (20153030031720) and the Technology Innovation Program funded by the Korea government (MOTIE) (No. 10047796).

There has been much attention towards dye-sensitized solar cells (DSSCs) for the past decades due to their attractive features such as high energy conversion efficiency and low production cost etc. Recently, cobalt complexes have been suggested as one of the most promising candidates for replacing conventional iodine redox couples owing to their high voltage characteristics. Even though respectable energy efficiency exceeding 12% was reported by employing liquid electrolyte that consists of cobalt complex redox mediator and volatile solvent, the use of volatile liquid solvent cannot ensure the long-term stability of DSSCs. In this work, therefore, novel polymer gel electrolytes (PGEs) including cobalt complexes as redox couples have been prepared for efficient and long-term stable DSSCs. In addition, several ways to mitigate the charge recombination rate at the interface between PGE and photoanode have been systematically investigated. The electron transport properties in mesoporous TiO2 electrodes (i.e. electron lifetime and diffusion coefficients) have been evaluated through IMPS and IMVS analyses. In addition, the photovoltaic performances of DSSCs employing prepared PGEs have been evaluated via the J-V curve measurements and various electrochemical characterizations. Acknowledgments: This work was supported by a grant (No.2017000140002/ RE201702218) from the Environmental Industry Advancement Technology Development Project of Korea Environmental Industry & Technology (KEITI) funded by Korea Ministry of Environment (MOE).

Polymer gel electrolytes (PGEs) have been widely investigated and utilized in various electrochemical applications such as lithium secondary batteries and dye-sensitized solar cells because they possess moderate ion conductivity and high physical stability. They have also been developed for the application to electrochromic devices (ECDs). Recently, ECDs have been attracting much attention owing to their use as a smart window. A smart window or a smart glass can effectively control the light transmission properties for the purpose of proper lighting or heating etc. The PGEs as one of the key components of the ECDs can dominate the major characteristics of transmittance and colored time etc. Especially, the ion conductivity and volatility of the PGEs should be optimized for the fabrication of efficient and durable ECDs. In addition, efficient injection process of highly viscous PGEs during the fabrication of large area ECDs should also be considered. In this work, therefore, we have developed the PGEs which can be easily loaded as a film and then in-situ polymerized through UV irradiation. The PGEs have also been applied to photoelectrochemical cells (i.e. dye-sensitized solar cells) for the efficient energy harvesting from solar irradiation. Acknowledgments: This work was supported by a grant (No.2017000140002/ RE201702218) from the Environmental Industry Advancement Technology Development Project of Korea Environmental Industry & Technology (KEITI) funded by Korea Ministry of Environment (MOE).