Search

Hydrogel-based iontronics is emerging as a promising frontier in healthcare and human-machine interfacing (HMI), offering excellent compatibility with biological systems in terms of electrical, chemical, and mechanical properties. However, conventional hydrogel systems have limitations in dynamically regulating their electrical and optical properties, which restricts their use in adaptive electronics and responsive interfaces. In this study, we present a new hydrogel system with UV photochemistry-induced reversible conductivity, enabling reversible changes in conductivity. Unlike typical photo-responsive hydrogels that revert to their original states upon removal of the light source, the new hydrogel can maintain its activated states without continuous light exposure, facilitating practical applications. By leveraging the photobase triphenylmethane leucohydroxide and photoacid n-nitrobenzaldehyde, we achieve a significant increase in photo-induced conductivity compared to existing photo-ionic hydrogels. Combining the effective photo-induced conductivity and the accompanied photochromatic effect, we demonstrate a full hydrogel-based stylus pad capable of tracking motion and strokes, and a soft calculator keypad with programmable conductivity and imprinted patterns. These advancements underscore the importance of actively controlling localized conductivity and processing light inputs in hydrogels, exhibiting their potential for diverse applications in bioelectronics and HMI., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests:Yuhang Hu reports financial support was provided by National Science Foundation. Yuhang Hu reports financial support was provided by Office of Naval Research. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Light energy provides an attractive fuel source for energy dissipating systems because of the lack of waste production, wavelength tunability and the potential for spatial and temporal resolution. In this work, we describe a peptide-spiropyran conjugate that assembled into a transient nanofiber hydrogel in the presence of visible light, and dissociated when the light source was removed.

In this work, nanocomposite hydrogels were prepared by gamma-radiation copolymerization of acrylic acid (AAc) onto plasticized starch (PLST)/montmorillonite clay (MMT)/chitosan (CS) blends. The effect of irradiation dose and MMT nanoparticle contents on the gel fraction and water absorption characters of PAAc-co-(PLST/MMT/CS) hydrogels was investigated. In addition, the structure-property behavior of the nanocomposite hydrogels was characterized by FTIR spectroscopy, thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The study showed that the appropriate dose of gamma irradiation to achieve homogeneous nanocomposite hydrogels films and the highest absorption in water was 15 kGy, regardless of composition. The introduction of MMT up to 5-wt (%) improved the physical properties and enhanced the drug uptake-release characters. The effect of the nanocomposite hydrogels on skin wound healing were evaluated by rat models, taking sulfanilamide as a model drug. The profiles of rat skin after different time intervals up 21 days revealed that wounds treated with the copolymer hydrogels were healed faster which it may considered as a potential candidate for wound dressing materials., (Copyright © 2021 Elsevier B.V. All rights reserved.)

Smart response hydrogel has a broad application prospect in human health real-time monitoring due to its responses to a variety of stimuli. In this study, we developed a novel smart hydrogel dressing based on conductive MXene nanosheets and a temperature-sensitive PNIPAm polymer. γ-Methacryloxypropyltrimethoxysilane (KH570) was selected to functionalize the surface of MXene further to improve the interface compatibility between MXene and PNIPAm. Our prepared K-M/PNIPAm hydrogel was found to have a strain-sensitive property, as well as a respond to NIR phase change and volume change. When applied as a strain flexible sensor, this K-M/PNIPAm hydrogel exhibited a high strain sensitivity with a gauge factor (GF) of 4.491, a broad working strain range of ≈250%, a fast response of ∼160 ms, and good cycle stability (i.e., 3000 s at 20% strain). Besides, this K-M/PNIPAm hydrogel can be used as an efficient NIR light-controlled drug release carrier to achieve on-demand drug release. This work paved the way for the application of smart response hydrogel in human health real-time monitoring and NIR-controlled drug release functions.

Hydrogels often have poor mechanical properties which limit their application in load-bearing tissues such as muscle and cartilage. In this work, a near-infrared light-triggered stretchable thermal-sensitive hydrogel with ultra-high drug loading was developed by a combination of natural polymeric nanocrystals, a network of synthetic thermo-responsive polymer, and magnetic Fe 3 O 4 nanoparticles. The hydrogels comprise cellulose nanocrystals (CNCs) decorated with Fe 3 O 4 nanoparticles (Fe 3 O 4 /CNCs) dispersed homogeneously in poly(N-isopropylacrylamide) (PNIPAm) networks. The composite hydrogels exhibit an extensibility of 2200%. Drug loading of vancomycin (VCM) reached a high value of 10.18 g g -1 due to the dispersion of Fe 3 O 4 /CNCs and the interactions between the CNCs and the PNIPAm network. Importantly, the hydrogels demonstrated a thermo-response triggered by NIR, with the temperature increasing from 26 to 41 °C within 60 s. The hydrogels have high biocompatibility evidenced by cell proliferation tests, illustrating that these hydrogels are promising as dressings for wound closure, and wound healing., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Solar-driven steam generation has been recognized as a sustainable and low-cost solution to freshwater scarcity using abundant solar energy. To harvest freshwater, various interfacial evaporators with rational designs of photothermal materials and structures have been developed concentrating on increasing the evaporation rate in the past few years. However, pathogenic microorganism accumulation on the evaporators by long-duration contact with natural water resources may lead to the deterioration of water transportation and the reduction of the evaporation rate. Here, we develop cationic photothermal hydrogels (CPHs) based on [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC) and photothermal polypyrrole (PPy) with bacteria-inhibiting capability for freshwater production via solar-driven steam generation. A rapid water evaporation rate of 1.592 kg m -2 h -1 under simulated solar irradiation is achieved with CPHs floating on the water surface. Furthermore, we find that CPHs possess nearly 100% antibacterial performance against Escherichia coli ( E. coli ) and Staphylococcus aureus ( S. aureus ). The significant bacteria-inhibiting capability is mainly attributed to the large number of ammonium groups on the CPH network. Moreover, we show that CPHs exhibit good applicability with stable evaporation in natural lake water over 2 weeks, and the number of bacteria in purified lake water is significantly reduced. The device based on CPHs can achieve ∼0.49 kg m -2 h -1 freshwater production from lake water under natural sunlight. This study provides an attractive strategy for the evaporator to inhibit biological contamination and a potential way for long-term stable freshwater production from natural water resources in practical application.

Due to their excellent biocompatibility and biodegradability, natural hydrogels are highly demanded biomaterials for biomedical applications such as wound dressing, tissue engineering, drug delivery or three dimensional cell culture. Highly energetic electron irradiation up to 10 MeV is a powerful and fast tool to sterilize and tailor the material's properties. In this study, electron radiation treatment of agarose hydrogels was investigated to evaluate radiation effects on physical, structural and chemical properties. The viscoelastic behavior, surface hydrophilicity and swelling behavior in a range of typical sterilization doses of 0 kGy to 30 kGy was analyzed. The mechanical properties were determined by rheology measurements and decreased by more than 20% compared to the initial moduli. The number average molecular weight between crosslinks was estimated based on rubber elasticity theory to judge on the radiation degradation. In this dose range, the number average molecular weight between crosslinks increased by more than 6%. Chemical structure was investigated by FTIR spectroscopy to evaluate the radiation resistance of agarose hydrogels. With increasing electron dose, an increasing amount of carbonyl containing species was observed. In addition, irradiation was accompanied by formation of gas cavities in the hydrogels. The gas products were specified for CO 2 , CO and H 2 O. Based on the radiolytic products, a radiolysis mechanism was proposed. Electron beam treatment under high pressure conditions was found to reduce gas cavity formation in the hydrogels., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Two-photon polymerization of a three-dimensional (3D) hydrogel structure has been widely applied in biological tissue engineering. For improving the biocompatibility of hydrogel structures, a new kind of ionic carbazole water-soluble photoinitiator was prepared to realize the fabrication of a 3D hydrogel structure in aqueous phase. 3,6-Bis[2-(1-methyl-pyridinium)vinyl]-9-methyl-carbazole diiodide (BMVMC) and cucurbit[7]uril (CB7) have been employed to generate a complex with better water solubility by host-guest interactions. The binding ratio of the complex was demonstrated to be 1:1 through the characterization of isothermal titration calorimetry (ITC). The two-photon absorption (TPA) cross section of the complex increases to 2500 GM compared with the 750 GM of the BMVMC molecule. Then, an aqueous-phase photoresist was obtained using the CB7/BMVMC complex as the photoinitiator and poly(ethylene glycol) diacrylate (PEGda) as the hydrogel monomer. Two-photon fabrication capability in aqueous phase has been studied using the as-prepared photoresist. A low laser threshold of 3.7 mW as well as a high resolution of 180 nm are achieved. Benefiting from the fluorescence properties of the photoinitiator, we can achieve the confocal fluorescence images without any assistance of fluorescent probes. Subsequently, a 3D engineered hydrogel scaffold microstructure was fabricated by the two-photon polymerization technology, whose biocompatibility was demonstrated by culturing the structure with living cells of L929. The BMVMC-CB7 complex and the as-prepared photoresist are demonstrated to have good biocompatibility, which is prospective for further application in tissue engineering.

Fabricating antibacterial hydrogels with antimicrobial drugs and synthetic biocompatible biomimetic hydrogels is a promising strategy for practical medical applications. Here, we report a bicomponent hydrogel composed of a biomimetic polyisocyanopetide (PIC) hydrogel and a photodynamic antibacterial membrane-intercalating conjugated oligoelectrolyte (COE). The aggregation behavior and aggregate size of the COEs in water can be regulated using the PIC hydrogel, which could induce COEs with higher reactive oxygen species (ROS) production efficiency and increased association of COEs toward bacteria, therefore enhancing the antibacterial efficiency. This strategy provides a facile method for developing biomimetic hydrogels with high antibacterial capability.

Long-active conductivity, adhesiveness, and environmental stability are essential in the applications of hydrogel electronics. Integrating different functional materials into one system suffers from compatibility and cost problems. Inspired by the unique o-methoxyl structure in polyphenol lignin and its binding role in plants, catechol lignin (DAL) is constructed by one-step demethylation, which endows the lignin with a mussel-like bioadhesion, good reducibility, as well as a high ultraviolet absorption. The DAL is then applied to reduced graphene oxide, and the products-the oxidized DAL and the reduced graphene oxide mixture (DAL/rGO) is added into a sodium alginate/polyacrylamide (SA/PAM) double network hydrogel. Based on the Schiff base reaction between the quinone of the oxidized DAL and the amino of the skin, the DAL/rGO incorporated hydrogels could stably adhere to the skin, and sensitively respond to physiological signals. In addition, the DAL could provide the hydrogels with long-active sunscreen property when applied to real skin. These DAL based hydrogels have potential for on-skin sensing and outdoor sport equipment., (© 2021 Wiley-VCH GmbH.)

Understanding the spatiotemporal effects of surface topographies and modulated stiffness and anisotropic stresses of hydrogels on cell growth remains a biophysical challenge. Here we introduce the photolithographic patterning or two-photon laser scanning confocal microscopy patterning of a series of o-nitrobenzylphosphate ester nucleic acid-based polyacrylamide hydrogel films generating periodically-spaced circular patterned domains surrounded by continuous hydrogel matrices. The patterning processes lead to guided modulated stiffness differences between the patterned domains and the surrounding hydrogel matrices, and to the selective functionalization of sub-regions of the films with nucleic acid anchoring tethers. HeLa cells are deposited on the circularly-shaped domains functionalized with the MUC-1 aptamers. Initiation of the hybridization chain reaction by nucleic acid tethers associated with the continuous hydrogel matrix results in stress-induced ordered orthogonal shape-changes on the patterned domains, leading to ordered shapes of cell aggregates bound to the patterns.

Single-cell and in situ cell-based operation with nanopipette approach offers a possibility to elucidate the intracellular processes and may aid the improvement of therapy efficiency and precision. We present here a photo-responsive hydrogel-nanopipette hybrid system that can achieve single-cell operation with high spatial/temporal resolution and negligible cell damage. This strategy overcomes long-time obstacles in nanopipette single-cell studies as high electric potential (ca. 1000 mV) or organic solvent is always used during operations, which would inevitably impose disturbance and damage to targeted cells. The light-triggered system promotes a potential-free, non-invasive single-cell injection, resulting in a well-retained cell viability (90 % survival rate). Moreover, the photo-driven injection enables a precisely dose-controllable single-cell drug delivery. Significantly reduced lethal doses of doxorubicin (163-217 fg cell -1 ) are demonstrated in corresponding cell lines., (© 2020 Wiley-VCH GmbH.)

Xanthan gum (XG) and polyvinylpyrrolidone (PVP) are two polymers with low toxicity, high biocompatibility, biodegradability, and high hydrophilicity, making them promising candidates for multiple medical aspects. The present work aimed to synthesize a hydrogel from a mixture of XG and PVP and crosslinked by gamma irradiation. We assessed the hydrogel through a series of physicochemical (FT-IR, TGA, SEM, and percentage of swelling) and biological (stability of the hydrogel in cell culture medium) methods that allowed to determine its applicability. The structural evaluation by infrared spectrum demonstrated that a crosslinked hydrogel was obtained from the combination of polymers. The calorimetric test and swelling percentage confirmed the formation of the bonds responsible for the crosslinked structure. The calorimetric test evidenced that the hydrogel was resistant to decomposition in contrast to non- irradiated material. The determination of the swelling degree showed constant behavior over time, indicating a structure resistant to hydrolysis. This phenomenon also occurred during the test of stability in a cell culture medium. Additionally, microscopic analysis of the sample revealed an amorphous matrix with the presence of porosity. Thus, the findings reveal the synthesis of a novel material that has desirable attributes for its potential application in pharmaceutical and biomedical areas.

For the problems in the research on differentiation of mesenchymal stem cells (BMSCs), such as poor differentiation tendency and low differentiation efficiency, a novel photo-crosslinked extracellular matrix (ECM) inspired double network hydrogel that composed of poly(γ-glutamic acid) (γ-PGA) hydrogel and Fe 3+ ligand coordination was designed and manufactured. Compared with those traditional γ-PGA based hydrogels, the introduction of Fe 3+ significantly enhanced the mechanical properties of the hydrogel and accelerated the chondrogenesis efficiency of BMSCs chondrogenesis. The experimental results confirmed that the mechanical properties of hydrogel enhanced by the introduction of metal ions Fe 3+ could promote BMSCs proliferation, induce cartilage-specific gene expression, and increase secretion of hydroxyproline (HYP) and glycosaminoglycan (GAG). As a result, this method could promote chondrogenic differentiation of BMSCs, accelerate the regeneration of cartilage, and was prospective to be conducive to the research work of cartilage defect repair. Thus, the mechanically enhanced γ-PGA hydrogel scaffold by Fe 3+ could mediate BMSCs differentiation and provide a scientific and theoretical basis for research and development of biomedical materials on cartilage tissue engineering field., Competing Interests: Declaration of competing interest There are no conflicts to declare., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Bio-hybrid hydrogels consist of a water-swollen hydrophilic polymer network encapsulating or conjugating single biomolecules, or larger and more complex biological constructs like whole cells. By modulating at least one dimension of the hydrogel system at the micro- or nanoscale, the activity of the biological component can be extremely upgraded with clear advantages for the development of therapeutic or diagnostic micro- and nano-devices. Gamma or e-beam irradiation of polymers allow a good control of the chemistry at the micro-/nanoscale with minimal recourse to toxic reactants and solvents. Another potential advantage is to obtain simultaneous sterilization when the absorbed doses are within the sterilization dose range. This short review will highlight opportunities and challenges of the radiation technologies to produce bio-hybrid nanogels as delivery devices of therapeutic biomolecules to the target cells, tissues, and organs, and to create hydrogel patterns at the nano-length and micro-length scales on surfaces.

The development of intelligent and multifunctional hydrogels having photothermal properties, good mechanical properties, sustained drug release abilities with low burst release, antibacterial properties, and biocompatibility is highly desirable in the biomaterial field. Herein, mesoporous polydopamine (MPDA) nanoparticles wrapped with graphene oxide (GO) were physically cross-linked in cellulose nanofibril (CNF) hydrogel to obtain a novel MPDA@GO/CNF composite hydrogel for controllable drug release. MPDA nanoparticles exhibited a high drug loading ratio (up to 35 wt %) for tetracycline hydrochloride (TH). GO was used to encapsulate MPDA nanoparticles for extending the drug release time and reinforcing the physical strength of the obtained hydrogel. The mechanical strength of the as-fabricated MPDA@GO/CNF composite hydrogel was five times greater compared to that of the pure CNF hydrogel. Drug release experiments demonstrated that burst release behavior was significantly reduced by adding MPDA@GO. The drug release time of the MPDA@GO/CNF composite hydrogel was 3 times and 7.2 times longer than that of the polydopamine/CNF hydrogel and pure CNF hydrogel, respectively. The sustained and controlled drug release behaviors of the composite hydrogel were highly dependent on the proportion of MPDA and GO. Moreover, the rate of drug release could be accelerated by near-infrared (NIR) light irradiation and pH value change. The drug release kinetics of the as-prepared composite hydrogel was well described by the Korsmeyer-Peppas model, and the drug release mechanism of TH from the composite hydrogel was anomalous transport. Importantly, this carefully designed MPDA@GO/CNF composite hydrogel showed good biocompatibility through an in vitro cytotoxicity test. In particular, the toxicity of GO was well shielded by the CNF hydrogel. Therefore, this novel MPDA@GO/CNF composite hydrogel with an encapsulation structure for controllable drug release and toxicity shielding of GO could be used as a very promising controlled drug delivery carrier, which may have potential applications for chemical and physical therapies.

In this study, multifunctional hydrogels containing host-guest complex formation between azobenzene-grafted carboxymethyl cellulose (CMC-Azo) and β-cyclodextrin (CD) dimers connected by disulfide bonds with agarose for structural support were prepared. The obtained hydrogels exhibited self-healing properties by host-guest complexation as well as gel-sol phase transition in response to ultraviolet (UV) light and reducing agents. Photo-switchable properties of the hydrogels depend on changes in the complex formation of CD-dimers through the trans(450 nm) to cis(365 nm) photo-isomerization of azobenzene. The tensile and strain sweep tests confirmed that the hydrogel's self-healing ability was 79.44% and 81.59%, respectively. In addition, drug release from the hydrogels was controlled to accelerate to 80% in 3 h using UV light or reducing agent. Since the suggested photo-switchable, reduction-responsive, and self-healable hydrogels are non-cytotoxic, they can be potentially applied as biomedical materials in the development of hydrogel-based drug release systems., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Natural musculoskeletal systems have been widely recognized as an advanced robotic model for designing robust yet flexible microbots. However, the development of artificial musculoskeletal systems at micro-nanoscale currently remains a big challenge, since it requires precise assembly of two or more materials of distinct properties into complex 3D micro/nanostructures. In this study, we report femtosecond laser programmed artificial musculoskeletal systems for prototyping 3D microbots, using relatively stiff SU-8 as the skeleton and pH-responsive protein (bovine serum albumin, BSA) as the smart muscle. To realize the programmable integration of the two materials into a 3D configuration, a successive on-chip two-photon polymerization (TPP) strategy that enables structuring two photosensitive materials sequentially within a predesigned configuration was proposed. As a proof-of-concept, we demonstrate a pH-responsive spider microbot and a 3D smart micro-gripper that enables controllable grabbing and releasing. Our strategy provides a universal protocol for directly printing 3D microbots composed of multiple materials.

Background: Periodontal pathogenic bacteria promote the destruction of periodontal tissues and cause loosening and loss of teeth in adults. However, complete removal of periodontal pathogenic bacteria, at both the bottom of the periodontal pocket and the root bifurcation area, remains challenging. In this work, we explored a synergistic antibiotic and photothermal treatment, which is considered an alternative strategy for highly efficient periodontal antibacterial therapy., Methods: Mesoporous silica (MSNs) on the surface of Au nanobipyramids (Au NBPs) were designed to achieve the sustained release of the drug and photothermal antibacterials. The mesoporous silica-coated Au NBPs (Au NBPs@SiO 2 ) were mixed with gelatin methacrylate (GelMA-Au NBPs@SiO 2 ). Au NBPs@SiO 2 and GelMA-Au NBPs@SiO 2 hybrid hydrogels were characterized, and the drug content and photothermal properties in terms of the release profile, bacterial inhibition, and cell growth were investigated., Results: The GelMA-Au NBPs@SiO 2 hybrid hydrogels showed controllable minocycline delivery, and the drug release rates increased under 808 nm near-infrared (NIR) light irradiation. The hydrogels also exhibited excellent antibacterial properties, and the antibacterial efficacy of the antibiotic and photothermal treatment was as high as 90% and 66.7% against Porphyromonas gingivalis ( P. gingivalis ), respectively. Moreover, regardless of NIR irradiation, cell viability was over 80% and the concentration of Au NBPs@SiO 2 in the hybrid hydrogels was as high as 100 µg/mL., Conclusion: We designed a new near-infrared light (NIR)-activated hybrid hydrogel that offers both sustained release of antibacterial drugs and photothermal treatment. Such sustained release pattern yields the potential to rapidly eliminate periodontal pathogens in the periodontal pocket, and the photothermal treatment maintains low bacterial retention after the drug treatment., Competing Interests: The authors report no conflicts of interest in this work., (© 2020 Lin et al.)

The creation of a polymeric hydrogel from polyvinylpyrrolidone (PVP) cross-linked by Carbon Quantum Dots (CD) for the adsorption and photocatalytic degradation of both cationic and anionic dyes. PVP, an important biocompatible constituent and often surplus in cosmetic industry, was carboxylated through NaOH refluxing and covalently conjugated to surface amine functionality of CD derived from lemon juice and Cysteamine. The hybrid hydrogel was obtained from PVP-CD covalent conjugate by careful manipulation of pH and found to possess better rheological properties than only carboxylate-PVP. The monolayer physisorption of the dyes on the hydrogel was affected by hydrogen bonding, dispersion or inductive effect, and π-π interaction with the polymer backbone as well as the CD that followed pseudo-second-order kinetics. Degradation of the adsorbed dyes was instated by the unique Reactive Oxygen Species (ROS) generating ability of the CD embedded in the hydrogel matrix upon exposure to sunlight, the mechanism of which is also unveiled. The same CD-induced ROS was found to effectively annihilate both gram-positive and gram-negative bacteria in real polluted water in less than 10 min of photoexcitation of the hydrogel. The hydrogel was restored by mild acid wash that is able to perform dye adsorption and photo-degradation upto four cycles., Competing Interests: Declaration of Competing Interest The authors declare that there are no conflicts of interest., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Stimuli-responsive hydrogels with adaptable physical properties show great potential in the biomedical field. In particular, the collection of electrical signals is essential for precision medicine. Here, a simple strategy is demonstrated for achieving controlled drug release and real-time monitoring using an interpenetrating binary network consisting of a graphene aerogel and a poly(N-isopropylacrylamide) hydrogel with incorporated polydopamine nanoparticles (PDA-NPs). Owing to the good physical properties of graphene and the embedded PDA-NPs, the hybrid hydrogel shows enhanced mechanical properties and good electrical conductivity. In addition, the hybrid hydrogel also shows dual thermo- and near-infrared light responsiveness, as revealed by the controlled release of a model drug. In addition, as the hydrogel exhibits detectable changes in resistance during drug release, the drug-release behavior of the hydrogel can be monitored in real time using electrical signals. Moreover, owing to the abundance of catechol groups on the PDA-NPs, the hybrid hydrogel shows good tissue adhesiveness, as demonstrated using in vivo experiments. Thus, the developed hybrid hydrogel exhibits considerable practical applicability for drug delivery and precision medicine.

A short peptide based hydrogel exhibits aqueous insolubility, thixotropy and efficient light induced syneresis. Upon irradiation with UV light, the hydrogel shrinks and expells ∼50% of the solvent. Syneresis is caused by light-triggered trans-cis isomerisation of an azobenzene moiety in the peptide derivative. This expulsion of solvent can be effectively exploited in the removal of low molecular weight contaminants in water.

Photolabile moieties have been utilized in applications ranging from peptide synthesis and controlled protein activation to tunable and dynamic materials. The photochromic properties of nitrobenzyl (NB) based linkers are readily tuned to respond to cytocompatible light doses and are widely utilized in cell culture and other biological applications. While widely utilized, little is known about how the microenvironment, particularly confined aqueous environments (e.g., hydrogels), affects both the mode and rate of cleavage of NB moieties, leading to unpredictable limitations in control over system properties (e.g., rapid hydrolysis or slow photolysis). To address these challenges, we synthesized and characterized the photolysis and hydrolysis of NB moieties containing different labile bonds (i.e., ester, amide, carbonate, or carbamate) that served as labile crosslinks within step-growth hydrogels. We observed that NB ester bond exhibited significant rates of both photolysis and hydrolysis, whereas, importantly, the NB carbamate bond had superior light responsiveness and resistance to hydrolysis within the hydrogel microenvironment. Exploiting this synergy and orthogonality of photolytic and hydrolytic degradation, we designed concentric cylinder hydrogels loaded with different cargoes (e.g., model protein with different fluorophores) for either combinatorial or sequential release, respectively. Overall, this work provides new facile chemical approaches for tuning the degradability of NB linkers and an innovative strategy for the construction of multimodal degradable hydrogels, which can be utilized to guide the design of not only tunable materials platforms but also controlled synthetic protocols or surface modification strategies.

The combination of photothermal therapy (PTT) with chemotherapy has great potential to maximize the synergistic effect of thermo-induced chemosensitization and improve treatment performance. To achieve high drug-loading capacity as well as precise synchronization between the controllable release of chemotherapeutics and the duration of near-infrared PTT, in this work, a facile one-step method was first developed to fabricate a novel injectable in situ forming photothermal modulated hydrogel drug delivery platform (D-PPy@PNAs), in which a PNIPAM-based temperature-sensitive acidic triblock polymer [poly(acrylic acid- b - N -isopropylamide- b -acrylic acid (PNA)] was utilized as the stabilizing agent in the polymerization of polypyrrole (PPy). The in situ forming hydrogels showed a sensitive temperature-responsive sol-gel phase-transition behavior, as well as an excellent photothermal property. The strong interaction of ionic bonds together with π-π stacking interactions resulted in high doxorubicin (DOX) loading capacity and controlled/sustained drug release behavior. In addition, D-PPy@PNAs also displayed enhanced cellular uptake and promoted intratumoral penetration of DOX upon NIR laser irradiation. The synergistic photothermal therapy-chemotherapy of D-PPy@PNA hydrogels greatly improved the antitumor efficacy in vivo. Therefore, thermosensitive polypyrrole-based D-PPy@PNA hydrogels may be powerful drug delivery nanoplatforms for precisely synergistic photothermo-chemotherapy of tumors.

We show ionically cross-linked, temperature-responsive reversible or irreversible hydrogels of anionic cellulose nanocrystals (CNCs) and methacrylate terpolymers by mixing them homogeneously in the initially charge-neutral state of the polymer, which was subsequently switched to be cationic by cleaving side groups by UV irradiation. The polymer is a random terpolymer poly(di(ethylene glycol) methyl ether methacrylate)- rnd -poly(oligo(ethylene glycol) methyl ether methacrylate)- rnd -poly(2-((2-nitrobenzyl)oxycarbonyl)aminoethyl methacrylate), that is, PDEGMA- rnd -POEGMA- rnd -PNBOCAEMA. The PDEGMA and POEGMA repeating units lead to a lower critical solution temperature (LCST) behavior. Initially, homogeneous aqueous mixtures are obtained with CNCs, and no gelation is observed even upon heating to 60 °C. However, upon UV irradiation, the NBOCAEMAs are transformed to cationic 2-aminoethyl methacrylate (AEMA) groups, as 2-nitrobenzaldehyde moieties are cleaved. The resulting mixtures of anionic CNC and cationic PDEGMA- rnd -POEGMA- rnd -PAEMA show gelation for sufficiently high polymer fractions upon heating to 60 °C due to the interplay of ionic interactions and LCST. For short heating times, the gelation is thermoreversible, whereas for long enough heating times, irreversible gels can be obtained, indicating importance of kinetic aspects. The ionic nature of the cross-linking is directly shown by adding NaCl, which leads to gel melting. In conclusion, the optical triggering of the polymer ionic interactions in combination with its LCST phase behavior allows a new way for ionic nanocellulose hydrogel assemblies.

Triggerable materials capable of being degraded by selective stimuli stand to transform our capacity to precisely control biomedical device activity and performance while reducing the need for invasive interventions. Here, we describe the development of a modular and tunable light-triggerable hydrogel system capable of interfacing with implantable devices. We apply these materials to two applications in the gastrointestinal (GI) tract: a bariatric balloon and an esophageal stent. We demonstrate biocompatibility and on-demand triggering of the material in vitro, ex vivo, and in vivo. Moreover, we characterize performance of the system in a porcine large animal model with an accompanying ingestible LED. Light-triggerable hydrogels have the potential to be applied broadly throughout the GI tract and other anatomic areas. By demonstrating the first use of light-degradable hydrogels in vivo, we provide biomedical engineers and clinicians with a previously unavailable, safe, dynamically deliverable, and precise tool to design dynamically actuated implantable devices., (Copyright © 2020 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works. Distributed under a Creative Commons Attribution License 4.0 (CC BY).)

Stereolithography (SLA) 3D bioprinting has emerged as a prominent bioprinting method addressing the requirements of complex tissue fabrication. This chapter addresses the advancement in SLA 3D bioprinting in concurrent with the development of novel photocrosslinkable biomaterials with enhanced physical and chemical properties. We discuss the cytocompatible photoinitiators operating in the wide spectrum of the ultraviolet (UV) and the visible light and high-resolution dynamic mask projection systems with a suitable illumination source. The potential of SLA 3D bioprinting has been explored in various themes, like bone and neural tissue engineering and in the development of controlled microenvironments to study cell behavior. The flexible design and versatility of SLA bioprinting makes it an attractive bioprinting process with myriad possibilities and clinical applications.

Three-dimensional (3D) bioprinting is driving major innovations in the area of cartilage tissue engineering. As an alternative to computer-aided 3D printing, in situ additive manufacturing has the advantage of matching the geometry of the defect to be repaired without specific preliminary image analysis, shaping the bioscaffold within the defect, and achieving the best possible contact between the bioscaffold and the host tissue. Here, we describe an in situ approach that allows 3D bioprinting of human adipose-derived stem cells (hADSCs) laden in 10%GelMa/2%HAMa (GelMa/HAMa) hydrogel. We use coaxial extrusion to obtain a core/shell bioscaffold with high cell viability, as well as adequate mechanical properties for articular cartilage regeneration and repair.

Visible light-curable hydrogels have been investigated as tissue engineering scaffolds and drug delivery carriers due to their physicochemical and biological properties such as porosity, reservoirs for drugs/growth factors, and similarity to living tissue. The physical properties of hydrogels used in biomedical applications can be controlled by polymer concentration, cross-linking density, and light irradiation time. The aim of this review chapter is to outline the results of previous research on visible light-curable hydrogel systems. In the first section, we will introduce photo-initiators and mechanisms for visible light curing. In the next section, hydrogel applications as drug delivery carriers will be emphasized. Finally, cellular interactions and applications in tissue engineering will be discussed.

Self-assembled peptides have been shown to form well-defined nanostructures which display outstanding characteristics for many biomedical applications and especially in controlled drug delivery. Such biomaterials are becoming increasingly popular due to routine, standardized methods of synthesis, high biocompatibility, biodegradability and ease of upscale. Moreover, one can modify the structure at the molecular level to form various nanostructures with a wide range of applications in the field of medicine. Through environmental modifications such as changes in pH and ionic strength and the introduction of enzymes or light, it is possible to trigger self-assembly and design a host of different self-assembled nanostructures. The resulting nanostructures include nanotubes, nanofibers, hydrogels and nanovesicles which all display a diverse range of physico-chemical and mechanical properties. Depending on their design, peptide self-assembling nanostructures can be manufactured with improved biocompatibility and in vivo stability and the ability to encapsulate drugs with the capacity for sustained drug delivery. These molecules can act as carriers for drug molecules to ferry cargo intracellularly and respond to stimuli changes for both hydrophilic and hydrophobic drugs. This review explores the types of self-assembling nanostructures, the effects of external stimuli on and the mechanisms behind the assembly process, and applications for such technology in drug delivery., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

The ability to spatially organise the microenvironment of tissue scaffolds unlocks the potential of many scaffold-based tissue engineering applications. An example application is to aid the regeneration process of peripheral nerve injuries. Herein, we present a promising approach for three-dimensional (3D) micropatterning of nerve cells in tissue scaffolds for peripheral nerve repair. In particular, we demonstrate the 3D micropatterning of PC12 cells in a gelatin-hydroxyphenylpropionic acid (Gtn-HPA) hydrogel using ultrasound standing waves (USWs). PC12 cells were first aligned in 3D along nodal planes by the USWs in Gtn-HPA hydrogel precursor solution. The precursor was then crosslinked using horseradish peroxidase (HRP) and diluted hydrogen peroxide (H 2 O 2 ), thus immobilising the aligned cells within 90-120 s. This micropatterning process is cost effective and can be replicated easily without the need for complex and expensive specialised equipment. USW-aligned PC12 cells showed no adverse effect in terms of viability or ability to proliferate. To our best knowledge, this is the first report on the effect of USW alignment on neural cell differentiation. Differentiated and USW-aligned PC12 cells showed directional uniformity after 20 d, making this technique a promising alternative approach to guide the nerve regeneration process.

Photochemical processes offer the possibility of preparing functional hydrogels under green conditions that are compatible with both synthetic and natural polymers. In this study, chitosan-based poly(ethylene) glycol (PEG) were successfully synthesized under light irradiation in aqueous medium. Kinetic studies under irradiation showed that less than 2 min were necessary to obtain fully cross-linked networks. Thermomechanical analyses and swelling experiments indicated that introduction of chitosan overall weakens the hydrogel network but can create domains of higher thermal stability than the PEG-alone structure. The resulting chitosan-PEG hydrogels demonstrated a tremendous inhibition (100%) of bacterial growth (Escherichia coli and Staphylococcus aureus). After 6 months' ageing, one of the hydrogels preserved a high antifouling activity against Escherichia coli. This interesting result, which could be correlated with the network features, demonstrates the strong potential of these photochemical methods to obtain robust bio-functional materials.

Surgical sealants suitable for wounds with non-flat complex geometries are still a challenge to fulfill clinical requirements. Herein, a novel fit-to-shape sealant enhanced by photo-initiated crosslinking was developed utilizing maleic anhydride modified chitosan (MCS), benzaldehyde-terminated PEG (PEGDF) and polyethylene glycol diacrylate (PEGDA). Initially, the shear-thinning hydrogel prepared through the Schiff-base linkage between MCS and PEGDF could be injected into target sites, remolded to conform to a wound with non-flat complex geometry, and remain on the wound, avoiding adverse liquid leakage. Under illumination with ultra-violet (UV) light, the hydrogel was solidified in situ rapidly to adopt the wound contour and enhanced in adhesive strength to seal defects of the tissue. In addition, the hydrogel exhibits stability in extreme pH environments (pH = 1) and has potential to treat wounds inside the stomach with the existence of gastric acid. Moreover, the hydrogel can be applied as adhesive wound dressings through in situ 3D printing. Taken together, the fit-to-shape sealant enhanced by photo-initiated crosslinking can be considered as promising tissue adhesives for wound closure and other biomedical applications.

A biodegradable, near-infrared (NIR) - responsive hydrogel is one of the most promising strategies as a remotely triggered drug carrier. In this study, novel NIR-responsive hydrogels based on alginate structures were prepared for controllable drug release. The hydrogels were formed rapidly by reacting norbornene-functionalized alginates and tetrazine cross-linkers containing diselenide bonds via inverse electron demand Diels-Alder click chemistry. In order to manipulate their properties, we prepared hydrogels with various cross-linking densities. NIR sensitive indocyanine green (ICG) and a drug, doxorubicin (DOX) were incorporated in the hydrogel matrix during gelation. The hydrogels showed a suppressed release profile under physiological conditions, while NIR light triggered a rapid release of DOX. Under NIR-light irradiation, ICG generated reactive oxygen species which could decompose diselenide bonds in the hydrogel matrix, inducing the gel-sol transition and release of entrapped DOX. The degradation of hydrogels could be also controlled by the ratio of the precursors., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Vascular implants remain clinically challenged due to often-occurring thrombosis and stenosis. Critical to addressing these complications is the design of implant material surfaces to inhibit the activities of platelets, smooth muscle cells (SMCs) and inflammatory cells. Recent mechanobiology studies accentuate the significance of material elasticity to cells and tissues. We thus developed and characterized an implant coating composed of hybrid, viscoelastic microfibers with coaxial core-sheath nanostructure. The coating over metallic stent material was formed by first depositing coaxially-electrospun fibers of poly(L-lactic acid) core and polyethylene glycol dimethacrylate sheath, and then polymerizing fibers with various UV times. Material characterizations were performed to evaluate the coating structure, mechanical property and biocompatibility. Results showed that coaxial microfibers exhibited arterial-like mechanics. The soft surface, high water content and swelling ratio of the coaxial fibers resemble hydrogels, while they are mechanically strong with an elastic modulus of 172-729 kPa. The coating strength and surface elasticity were tunable with the photopolymerization time. Further, the elastic fibers, as conformal coating on stent metal, strongly reduced SMC overgrowth and discouraged platelet adhesion and activation, compared to bare metals. Importantly, after 7-day subcutaneous implantation, coaxial fiber-coated implants showed more favorable in vivo responses with reduced tissue encapsulation, compared to bare stent metals or those coated with a two-layered fiber mixture composed of fibers from individual polymers. The excellent biocompatibility aroused from nanostructural interfaces of hybrid fibers offering hydrated, soft, nonfouling microenvironments. Such integrated fiber system may allow creation of advanced vascular implants that possess physico-mechanical properties of native arteries., (Copyright © 2019 Elsevier B.V. All rights reserved.)

As an important natural polysaccharide biomaterial from marine organisms, alginate and its derivatives have shown great potential in the fabrication of biomedical materials such as tissue engineering, cell biology, drug delivery, and pharmaceuticals due to their excellent biological activity and controllable physicochemical properties. Ionic crosslinking is the most common method used in the preparation of alginate-based biomaterials, but ionic crosslinked alginate hydrogels are prone to decompose in physiological solution, which hinders their applications in biomedical fields. In this study, dual crosslinked alginate hydrogel microfibers were prepared for the first time. The ionic crosslinked methacrylated alginate (Alg-MA) hydrogel microfibers fabricated by Microfluidic Fabrication (MFF) system were exposed to ultraviolet (UV) light and covalent crosslink between methacrylate groups avoided the fracture of dual crosslinked macromolecular chains in organizational environment. The chemical structures, swelling ratio, mechanical performance, and stability were investigated. Cell-encapsulated dual crosslinked Alg-MA hydrogel microfibers were fabricated to explore the application in tissue engineering for the first time. The hydrogel microfibers provided an excellent 3D distribution and growth conditions for cells. Cell-encapsulated Alg-MA microfibers scaffolds with functional 3D tissue structures were developed which possessed great potential in the production of next-generation scaffolds for tissue engineering and regenerative medicine.

Synthetic organogels/hydrogels are attracting growing interests due to their potential applications in biomedical fields, organic electronics, and photovoltaics. Photogelation methods for synthesis of organogels/hydrogels have been shown particularly promising because of the high efficiency and simple synthetic procedures. This study synthesized new biodegradable polyhydroxyalkanoates (PHA)-based organogels/hydrogels via UV photo-cross-linking using unsaturated PHA copolymer poly[( R )-3-hydroxyundecanoate- co -( R )-3-hydroxy-10-undecenoate] (PHU10U) with polyethylene glycol dithiol (PDT) as a photo-cross-linker. The PHU10U was synthesized by an engineered Pseudomonas entomophila and characterized via Fourier transform infrared spectroscopy, 1 H nuclear magnetic resonance (NMR), and 13 C NMR. With decreasing the molar ratio of PHU10U to PDT, both the swelling ratio and pore size were decreased. Meanwhile, increasing densities of the gel networks resulted in a higher compressive modulus. Cell cytotoxicity studies based on the CCK-8 assay on both the PHU10U precursor and PHU10U/PDT hydrogels showed that the novel PHA-based biodegradables acting as hydrogels possess good biocompatibility.

Near-infrared (NIR)-driven shape memory hydrogels are synthesized with a one-pot polymerization of N,N-dimethylacrylamide in the inorganic clay and graphene oxide (GO) suspension. The hydrogel consists of only a physically crosslinked network, which is partially thermoreversible. With the efficient photothermal energy transformation of GO in the hydrogels, the shape recovery from the temporal shape is achieved by NIR irradiation. The optimal shape fixing percentage and recovery rate are found at moderate monomer and crosslinker contents. Meanwhile, the xerogel dried from the hydrogel also shows a fast NIR response shape change. The NIR manipulating combinational hydrogel-xerogel actuators are prepared by combining the wet and soft hydrogel and its dry and rigid xerogel together. The actuators achieve complex actions of turning and lifting under sequential NIR irradiation to carry an object up- and downward and around obstacles, or to transfer an object to a target position. This work provides a new idea for designing combinational actuators to fulfil complex actions., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In this study, the cyto-compatibility and cellular functionality of cell-laden gelatin-methacryloyl (Gel-MA) hydrogels fabricated using a set of photo-initiators which absorb in 400-450 nm of the visible light range are investigated. Gel-MA hydrogels cross-linked using ruthenium (Ru) and sodium persulfate (SPS), are characterized to have comparable physico-mechanical properties as Gel-MA gels photo-polymerized using more conventionally adopted photo-initiators, such as 1-[4-(2-hydroxyethoxy)-phenyl]-2-hydroxy-2-methyl-1-propan-1-one (Irgacure 2959) and lithium phenyl(2,4,6-trimethylbenzoyl) phosphinate (LAP). It is demonstrated that the Ru/SPS system has a less adverse effect on the viability and metabolic activity of human articular chondrocytes encapsulated in Gel-MA hydrogels for up to 35 days. Furthermore, cell-laden constructs cross-linked using the Ru/SPS system have significantly higher glycosaminoglycan content and re-differentiation capacity as compared to cells encapsulated using I2959 and LAP. Moreover, the Ru/SPS system offers significantly greater light penetration depth as compared to the I2959 system, allowing thick (10 mm) Gel-MA hydrogels to be fabricated with homogenous cross-linking density throughout the construct. These results demonstrate the considerable advantages of the Ru/SPS system over traditional UV polymerizing systems in terms of clinical relevance and practicability for applications such as cell encapsulation, biofabrication, and in situ cross-linking of injectable hydrogels., (© 2019 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Uncontrollable bleeding is a major problem in surgical procedures and after major trauma. Existing hemostatic agents poorly control hemorrhaging from traumatic arterial and cardiac wounds because of their weak adhesion to wet and mobile tissues. Here we design a photo-reactive adhesive that mimics the extracellular matrix (ECM) composition. This biomacromolecule-based matrix hydrogel can undergo rapid gelling and fixation to adhere and seal bleeding arteries and cardiac walls after UV light irradiation. These repairs can withstand up to 290 mm Hg blood pressure, significantly higher than blood pressures in most clinical settings (systolic BP 60-160 mm Hg). Most importantly, the hydrogel can stop high-pressure bleeding from pig carotid arteries with 4~ 5 mm-long incision wounds and from pig hearts with 6 mm diameter cardiac penetration holes. Treated pigs survived after hemostatic treatments with this hydrogel, which is well-tolerated and appears to offer significant clinical advantage as a traumatic wound sealant.

Induced circular dichroism (ICD) of polyoxomolybdates and polyoxotungstates was realized in three kinds of natural polysaccharide hydrogels possessing hierarchical chirality. Interestingly, the extrinsic chiral factors were dominant in ionic κ/ι-carrageenan hybrids, while the ICD of clusters was dominantly influenced by the intrinsic alternating bond length (ABL) distortions of polyoxometalates in agarose hybrid. The optical activity of the POMs shows sensitive response to multiple stimuli, such as temperature, K+ salts, UV irradiation and redox agents.

Molecular gels formed by the self-assembly of low-molecular-weight gelators have received increasing interest because of their potential applications in drug delivery. In particular, the ability of peptides and amino acids to spontaneously self-assemble into three-dimensional fibrous network has been exploited in the development of hydrogels. In this context, we have investigated the capacity of binary mixtures of aromatic amino acid derivatives to form hydrogels. Carbon nanomaterials, namely oxidized carbon nanotubes or graphene oxide, were incorporated in the two most stable hydrogels, formed by Fmoc-Tyr-OH/Fmoc-Tyr(Bzl)-OH and Fmoc-Phe-OH/Fmoc-Tyr(Bzl)-OH, respectively. The structural and physical properties of these gels were assessed using microscopic techniques and rheology. Circular dichroism and molecular dynamics simulations demonstrated that the hydrogel formation was mainly driven by aromatic interactions. Finally, a model hydrophilic drug (l-ascorbic acid) was loaded into the hybrid hydrogels at a high concentration. Under near-infrared light irradiation, a high amount of drug was released triggered by the heat generated by the carbon nanomaterials, thus offering interesting perspectives for controlled drug delivery.

Corneal injuries are common causes of visual impairment worldwide. Accordingly, there is an unmet need for transparent biomaterials that have high adhesion, cohesion, and regenerative properties. Herein, we engineer a highly biocompatible and transparent bioadhesive for corneal reconstruction using a visible light cross-linkable, naturally derived polymer, GelCORE (gel for corneal regeneration). The physical properties of GelCORE could be finely tuned by changing prepolymer concentration and photocrosslinking time. GelCORE revealed higher tissue adhesion compared to commercial adhesives. Furthermore, in situ photopolymerization of GelCORE facilitated easy delivery to the cornea, allowing for bioadhesive curing precisely according to the required geometry of the defect. In vivo experiments, using a rabbit stromal defect model, showed that bioadhesive could effectively seal corneal defects and induce stromal regeneration and re-epithelialization. Overall, GelCORE has many advantages including low cost and ease of production and use. This makes GelCORE a promising bioadhesive for corneal repair.

Control over of biological processes can potentially be therapeutically regulated through localized biomolecular deliveries. While implantable hydrogels can provide localized therapeutic deliveries, they do not traditionally provide the temporally complex therapeutic delivery profiles required to regulate complex biological processes. Ionically crosslinked alginate hydrogels have been shown to release encapsulated payloads in response to a remotely applied ultrasonic stimulus, thus potentially enabling more temporally complex therapeutic delivery profiles. However, thorough characterizations of how different types of therapeutic payloads are retained and ultrasonically released need to be performed. Additionally, the impact of potentially disruptive ultrasonic stimulations on hydrogel structure and temperature need to be characterized to better understand what range of ultrasonic signals can be used to trigger release. To perform these characterizations, calcium-crosslinked alginate hydrogels were loaded with various model macromolecules (dextrans), chemotherapeutics, and protein signaling factors and exposed to a variety of single-pulse and multi-pulse ultrasonic signals at various amplitudes and durations. In response to single-pulsed ultrasonic exposures, quantifications of molecular release, degree of gel erosion, and increase in hydrogel temperature revealed that the ultrasonic stimulations required for statistically significant therapeutic deliveries often eroded and heated the gels to unacceptable levels. However, multi-pulse ultrasonic exposures were shown to achieve significant amounts of therapeutic release while keeping gel erosion and temperature increase at modest levels. Finally, experiments were performed demonstrating that ultrasonic stimulation could be used to generate drug release profiles shown to have potential therapeutic benefits (e.g., pulsatile and sequential anticancer delivery profiles). This work underscores the potential of using ultrasonically responsive polymeric hydrogels for providing on-demand control over more complex therapeutic deliver profiles and enhancing drug delivery strategies in cancer therapies and beyond.

Smart materials with both bactericidal and bacteria-resistant functions are promising for combating the infection concern of medical devices. Current work mostly utilizes hydrolysis to switch materials from antimicrobial to antifouling forms by incubating materials in aqueous solutions for hours to days. In this work, a new photoresponsive poly[2-((4,5-dimethoxy-2-nitrobenzyl)oxy)- N-(2-(methacryloyloxy)ethyl)- N, N-dimethyl-2-oxoethan-1-aminium] (polyCBNA) hydrogel was developed, incorporating the photolabile 4,5-dimethoxy-2-nitrobenzyl and cationic quaternary ammonium groups. The photolabile groups were readily cleaved from the hydrogel shortly upon UV irradiation at 365 nm (a long wavelength widely used for biomedical applications), leading to polymer surface charge switching from cationic to zwitterionic form. Protein adsorbed significantly on polyCBNA but easily desorbed from surfaces after UV irradiation. The cationic hydrogel as a precursor was shown to effectively kill the attached bacteria, and then quickly switched to zwitterionic antifouling form via photolysis, which released the attached bacteria from surfaces and prevented further bacterial attachment. Moreover, the adhered endothelial cells were easily detached from polyCBNA surfaces triggered by light, providing a facile and less destructive nonenzymatic approach to harvest cells. This smart photoresponsive polyCBNA polymer, with integrated antimicrobial and antifouling properties, holds great potential in biomedical applications such as self-sterilizing and self-cleaning coatings for implants, cell harvesting, and cell patterning.

An extensive number of cell-matrix interaction studies have identified matrix stiffness as a potent regulator of cellular properties and behaviours. Perhaps most notably, matrix stiffness has been demonstrated to regulate mesenchymal stem cell (MSC) phenotype and lineage commitment. Given the therapeutic potential for MSCs in regenerative medicine, significant efforts have been made to understand the molecular mechanisms involved in stiffness regulation. These efforts have predominantly focused on using stiffness-defined polyacrylamide (PA) hydrogels to culture cells in 2D and have enabled elucidation of a number of mechano-sensitive signalling pathways. However, despite proving to be a valuable tool, these stiffness-defined hydrogels do not reflect the dynamic nature of living tissues, which are subject to continuous remodelling during processes such as development, ageing, disease and regeneration. Therefore, in order to study temporal aspects of stiffness regulation, researchers have developed and exploited novel hydrogel substrates with in situ tuneable stiffness. In particular, photoresponsive hydrogels with photoswitchable stiffness are emerging as exciting platforms to study MSC stiffness regulation. This chapter provides an introduction to the use of PA hydrogel substrates, the molecular mechanisms of mechanotransduction currently under investigation and the development of these emerging photoresponsive hydrogel platforms.

An as-synthesized MOFs-based hydrogel exhibits high sensitivity for β-lactamase through an "ON-OFF-OFF-ON" luminescence trigger. It allows achieving an unprecedented strategy for the judgement of penicillin allergy via luminescence detection of β-lactamase in serum.

Cellular morphology on and in a scaffold composed of extracellular matrix generally represents the cellular phenotype. Therefore, morphology-based cell separation should be interesting method that is applicable to cell separation without staining surface markers in contrast to conventional cell separation methods (e.g., fluorescence activated cell sorting and magnetic activated cell sorting). In our previous study, we have proposed a cloning technology using a photodegradable gelatin hydrogel to separate the individual cells on and in hydrogels. To further expand the applicability of this photodegradable hydrogel culture platform, we here report an image-based cell separation system imaging cell picker for the morphology-based cell separation on a photodegradable hydrogel. We have developed the platform which enables the automated workflow of image acquisition, image processing and morphology analysis, and collection of a target cells. We have shown the performance of the morphology-based cell separation through the optimization of the critical parameters that determine the system's performance, such as (i) culture conditions, (ii) imaging conditions, and (iii) the image analysis scheme, to actually clone the cells of interest. Furthermore, we demonstrated the morphology-based cloning performance of cancer cells in the mixture of cells by automated hydrogel degradation by light irradiation and pipetting., (Copyright © 2018 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.)

Advances in biosensors and drug delivery are dependent on hydrogels that respond to external stimuli. In this work, we describe the preparation and characterization of photoresponsive hydrogels prepared by cross-linking of di-NHS ester of azobenzoic acid and four-armed, amine-terminated poly(ethylene glycol). The porous structure and composition of the hydrogels were confirmed by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The reversible photoisomerization of the azobenzene-containing hydrogel cross-linkers in the gels was confirmed by absorption spectroscopy. Specifically, the photoisomerization of the cross-linkers between their trans and cis configurations was observed by monitoring the absorbance of the hydrogels at the two characteristic peaks of azobenzene (π-π* at 330 nm and n-π* at 435 nm). The effect of photoisomerization on the hydrogel structure was investigated by microscopy. Ultraviolet (UV) irradiation-induced reduction in hydrogel size was observed, which may be a result of the inherently smaller footprint of the cis azobenzene conformation, as well as dipole-dipole interactions between the polar cis azobenzene and the polymer network. The UV-triggered reduction in hydrogel size was accompanied by enhanced release of the near-infrared fluorescent dye Alexa Fluor 750 (AF 750 ). Enhanced release of AF 750 was observed in samples irradiated with UV versus dark control. Together, these data demonstrate the potential of these systems as reversible photoresponsive biomaterials.

A key objective in DNA-based material science is understanding and precisely controlling the mechanical properties of DNA hydrogels. We perform microrheology measurements using diffusing wave spectroscopy (DWS) to investigate the viscoelastic behavior of a hydrogel made of Y-shaped DNA (Y-DNA) nanostars over a wide range of frequencies and temperatures. We observe a clear liquid-to-gel transition across the melting temperature region for which the Y-DNA bind to each other. Our measurements reveal a cross-over between the elastic [Formula: see text] and loss modulus [Formula: see text] around the melting temperature [Formula: see text] of the DNA building blocks, which coincides with the systems percolation transition. This transition can be easily shifted in temperature by changing the DNA bond length between the Y shapes. Using bulk rheology as well, we further show that, by reducing the flexibility between the Y-DNA bonds, we can go from a semiflexible transient network to a more energy-driven hydrogel with higher elasticity while keeping the microstructure the same. This level of control in mechanical properties will facilitate the design of more sensitive molecular sensing tools and controlled release systems., Competing Interests: The authors declare no conflict of interest., (Copyright © 2018 the Author(s). Published by PNAS.)