169 results on '"Hwang, Joonsik"'
Search Results
2. Effect of driving characteristics and ambient temperature on the particle emissions during engine restart of spark ignition hybrid electric vehicle
3. Influence of plume arrangement on spray collapsing process in lateral-cylinder-mounted gasoline injectors
4. Spray process of multi-component gasoline surrogate fuel under ECN Spray G conditions
5. Mixing measurement on hydrogen jet by LIBS under various injection strategies
6. Catalyst-heating operation in compression-ignition engines: A comprehensive understanding using large eddy simulations
7. Fuel temperature and injection pressure influence on the cold start GDI sprays
8. Assessment of injector-flow characteristics of additised and renewable diesel blends through high-speed imaging
9. Plasma Combustion Characteristics of Resistance and Non-Resistance Spark Plugs in a Constant Volume Combustion Chamber (CVCC)
10. Review of Regulated, Unregulated and Particulate Emissions from Biodiesel Fuelled Compression Ignition Engines
11. A review of hydrogen utilization in power generation and transportation sectors: Achievements and future challenges
12. Improvement of Flame Kernel Growth by Microwave-Assisted Plasma Ignition
13. Introduction to Combustion Simulations and Optical Diagnostic Techniques for Internal Combustion Engines
14. Spray collapse characteristics of practical GDI spray for lateral-mounted GDI engines
15. Machine-learning based prediction of injection rate and solenoid voltage characteristics in GDI injectors
16. Flow visualisation in real-size optical injectors of conventional, additised, and renewable gasoline blends
17. Comprehensive Assessment of Gasoline Spray Robustness for Different Plume Arrangements
18. Machine-learning enabled prediction of 3D spray under engine combustion network spray G conditions
19. Influence of plasma-assisted ignition on flame propagation and performance in a spark-ignition engine
20. Image-Based Flame Temperature and Soot Analysis of Biofuel Spray Combustion
21. Characterization of Biodiesel Sprays
22. Spatio-temporal identification of plume dynamics by 3D computed tomography using engine combustion network spray G injector and various fuels
23. Injection Rate Measurements and Machine-Learning Based Predictions of Ecn Spray-A3 Piezoelectric Injector
24. Biodiesel Soot Characteristics
25. Performance and emission evaluation of a small-bore biodiesel compression-ignition engine
26. HRTEM evaluation of primary soot particles originated in a small-bore biofuel compression-ignition engine
27. Interaction of Cavitation with Sprays in High-Pressure Diesel Injection Systems
28. List of contributors
29. Comparative compression ignition engine performance, combustion, and emission characteristics, and trace metals in particulates from Waste cooking oil, Jatropha and Karanja oil derived biodiesels
30. Nanostructure characterization of soot particles from biodiesel and diesel spray flame in a constant volume combustion chamber
31. Experimental and Numerical Analysis of an Outward Opening Injector Pintle Dynamics
32. Quantitative Validation of a Computational Fluid Dynamics Methodology for Gasoline Sprays Under Cold Start Conditions
33. Influence of injector spray angle and gasoline-diesel blending ratio on the low load operation in a gasoline compression ignition (GCI) engine
34. Design Strategies for Biomass-Based CHP Systems in Rural Communities
35. Investigations on air-fuel mixing and flame characteristics of biodiesel fuels for diesel engine application
36. Application of a novel microwave-assisted plasma ignition system in a direct injection gasoline engine
37. Improvement of diesel combustion with multiple injections at cold condition in a constant volume combustion chamber
38. Development of limited-view tomography for measurement of Spray G plume direction and liquid volume fraction
39. Microscopic Imaging on Diesel Spray and Atomization Process.
40. Improvement of Flame Kernel Growth by Microwave-Assisted Plasma Ignition
41. Introduction to Combustion Simulations and Optical Diagnostic Techniques for Internal Combustion Engines
42. Understanding hydrogen jet dynamics for direct injection hydrogen engines
43. Application of waste cooking oil (WCO) biodiesel in a compression ignition engine
44. Microwave-assisted plasma ignition in a constant volume combustion chamber
45. Assessment of particulate matter in exhaust gas for biodiesel and diesel under conventional and low temperature combustion in a compression ignition engine
46. Effects of diesel fuel temperature on fuel flow and spray characteristics
47. Characterization of Biodiesel Sprays
48. Image-Based Flame Temperature and Soot Analysis of Biofuel Spray Combustion
49. Review on Plasma-Assisted Ignition Systems for Internal Combustion Engine Application
50. Spray Process of Multi-Component Gasoline Surrogate Fuel Under Ecn Spray G Conditions
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.