170 results on '"Huttunen-Saarivirta, E."'
Search Results
2. Characterization of surface films that develop on pre-oxidized copper in anoxic simulated groundwater with sulphide
3. A closer look at the corrosion of steel liner embedded in concrete
4. Pitting corrosion on highly alloyed stainless steels in dilute sulphuric acid containing sodium chloride
5. Tribocorrosion behaviour of tin bronze CuSn12 under a sliding motion in NaCl containing environment: Contact to inert vs. reactive counterbody
6. Tribocorrosion behaviour of thermally sprayed cermet coatings in paper machine environment
7. Development strategies for heavy duty electric battery vehicles: Comparison between China, EU, Japan and USA
8. Wear of additively manufactured tool steel in contact with aluminium alloy
9. Behaviour of leaded tin bronze in simulated seawater in the absence and presence of tribological contact with alumina counterbody: Corrosion, wear and tribocorrosion
10. Tribocorrosion behaviour of aluminium bronze in 3.5 wt.% NaCl solution
11. Ennoblement, corrosion, and biofouling in brackish seawater: Comparison between six stainless steel grades
12. Insights into the behaviour of tool steel-aluminium alloy tribopair at different temperatures
13. EIS study on aerobic corrosion of copper in ground water: influence of micro-organisms
14. Corrosion of copper in oxygen-deficient groundwater with and without deep bedrock micro-organisms: Characterisation of microbial communities and surface processes
15. Corrosion of Stainless Steels S31603, S31655, and S32101 in Sulfuric Acid Solutions
16. Corrosion behaviour of copper under biotic and abiotic conditions in anoxic ground water: electrochemical study
17. Tribocorrosion study of martensitic and austenitic stainless steels in 0.01 M NaCl solution
18. Corrosion mechanisms of sintered Nd–Fe–B magnets in the presence of water as vapour, pressurised vapour and liquid
19. Elevated-temperature corrosion of uncoated and aluminized 9–12% Cr boiler steels beneath KCl deposit
20. Thermally grown oxide films and corrosion performance of ferritic stainless steels under simulated exhaust gas condensate conditions
21. Erosive wear of boiler steels by sand and ash
22. Corrosion of cadmium plating by runway de-icing chemicals in cyclic tests: Effects of chemical concentration and plating quality
23. Bulk synthesis by spray forming of Al–Cu–Fe and Al–Cu–Fe–Sn alloys containing a quasicrystalline phase
24. Corrosion protection provided by electrolytic nickel and tin coatings for Nd–Fe–B magnets
25. The effect of aging on heat-resistant cast stainless steels
26. Corrosion of cadmium plating by runway de-icing chemicals: Study of surface phenomena and comparison of corrosion tests
27. Characterization and corrosion protection properties of epoxy powder coatings containing nanoclays
28. Microstructure and elevated-temperature erosion-oxidation behaviour of aluminized 9Cr-1Mo Steel
29. Corrosion behaviour of sintered Nd–Fe–B magnets
30. Microbiologically influenced corrosion (MIC) in stainless steel heat exchanger
31. Corrosion protection of galvanized steel by polyimide coatings: EIS and SEM investigations
32. Corrosion effects of runway de-icing chemicals on aircraft alloys and coatings
33. Influence of particle impact conditions and temperature on erosion–oxidation of steels at elevated temperatures
34. Erosion-oxidation of uncoated, aluminized and chromized-aluminized 9Cr–1Mo steels under fluidized-bed conditions at 550–700 °C
35. High-temperature erosion–oxidation of uncoated and FB-CVD aluminized and aluminized–siliconized 9Cr–1Mo steel under fluidized-bed conditions
36. Oxidation of Uncoated and Aluminized 9-12% Cr Boiler Steels at 550-650 °C
37. Erosion–Oxidation Behavior of Chromized–Aluminized 9% Chromium Steel under Fluidized-Bed Conditions at Elevated Temperature
38. Erosion–oxidation behaviour of pack-aluminized 9% chromium steel under fluidized-bed conditions at elevated temperature
39. Influence of thermomechanical processing on the microstructure and properties of a Cu-Cr-P Alloy
40. Particle angularity effects on the elevated-temperature erosion–oxidation behaviour of aluminium diffusion coatings on 9% Cr steel
41. Contributor Contact Details
42. The erosion-corrosion resistance of uncoated and aluminized 12% chromium ferritic steels under fluidized-bed conditions at elevated temperature (SUNASPO)
43. Autocatalytic tin plating in the fabrication of tin-coated copper tube
44. Influence of prior deformation on the age hardening of a phosphorus-containing Cu–0.61wt.%Cr alloy
45. Microstructural characterisation of thermally sprayed quasicrystalline Al–Co–Fe–Cr coatings
46. Erratum:Kinetic properties of the passive film on copper in the presence of sulfate-reducing bacteria (Journal of the Electrochemical Society (2018) 165 (C450) DOI: 10.1149/2.007189jes)
47. Characterising the quality of chemical tin coatings on copper by electrochemical current noise method
48. Microstructural study of the initiation and formation of immersion tin coating on copper
49. Magnesite-rich mining tailings as a raw material for refractory ceramics – microstructural and thermal analysis
50. Response to Comments on E. Huttunen-Saarivirta et al., “Kinetic Properties of the Passive Film on Copper in the Presence of Sulfate-Reducing Bacteria” [J. Electrochem. Soc., 165, C450 (2018)]
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.