Search

The ability to control nonclassical light emission from a single quantum emitter by an integrated cavity may unleash new perspectives for integrated photonic quantum applications. However, coupling a single quantum emitter to cavity within photonic circuitry towards creation of the Purcell-enhanced single-photon emission is elusive due to the complexity of integrating active devices in low-loss photonic circuits. Here we demonstrate a hybrid micro-ring resonator (HMRR) coupled with self-assembled quantum dots (QDs) for cavity-enhanced deterministic single-photon emission. The HMRR cavity supports whispering-gallery modes with quality factors up to 7800. By further introducing a micro-heater, we show that the photon emission of QDs can be locally and dynamically tuned over one free spectral ranges of the HMRR (~4 nm). This allows precise tuning of individual QDs in resonance with the cavity modes, thereby enhancing single-photon emission with a Purcell factor of about 4.9. Our results on the hybrid integrated cavities coupled with two-level quantum emitters emerge as promising devices for chip-based scalable photonic quantum applications.

Bright, polarized, and high-purity single-photon sources in telecom wavelengths are crucial components in long-distance quantum communication, optical quantum computation and quantum networks. Semiconductor InAs/InP quantum dots (QDs) combined with photonic cavities provide a competitive path leading to optimal single-photon sources in this range. Here, we demonstrate a bright and polarized single-photon source operating in the telecom C-band based on an elliptical Bragg grating (EBG) cavity. With a significant Purcell enhancement of 5.25$\pm$0.05, the device achieves a polarization ratio of 0.986, single-photon purity of g^2 (0)=0.078$\pm$0.016 and single-polarized photon collection efficiency of ~ 24% at the first lens (NA=0.65) without blinking. These findings suggest that C-band QD-based single-photon sources are potential candidates for advancing quantum communication.

Key requirements for quantum plasmonic nanocircuits are reliable single-photon sources, high coupling efficiency to the plasmonic structures and low propagation losses. Self-assembled epitaxially grown GaAs quantum dots are close to ideal stable, bright and narrowband single-photon emitters. Likewise, wet-chemically grown monocrystalline silver nanowires are among the best plasmonic waveguides. However, large propagation losses of surface plasmons on the high-index GaAs substrate prevent their direct combination. Here, we show by experiment and simulation that the best overall performance of the quantum plasmonic nanocircuit based on these building blocks is achieved in the intermediate field regime with an additional spacer layer between the quantum dot and the plasmonic waveguide. High-resolution cathodoluminescence measurements allow a precise determination of the coupling distance and support a simple analytical model to explain the overall performance. The coupling efficiency is increased up to four times by standing wave interference near the end of the waveguide., Comment: Accepted at ACS Nano Letters; contains main text and supporting information

We conduct a combined experimental and theoretical study of the quantum-confined Stark effect in GaAs/AlGaAs quantum dots obtained with the local droplet etching method. In the experiment, we probe the permanent electric dipole and polarizability of neutral and positively charged excitons weakly confined in GaAs quantum dots by measuring their light emission under the influence of a variable electric field applied along the growth direction. Calculations based on the configuration-interaction method show excellent quantitative agreement with the experiment and allow us to elucidate the role of Coulomb interactions among the confined particles and -- even more importantly -- of electronic correlation effects on the Stark shifts. Moreover, we show how the electric field alters properties such as built-in dipole, binding energy, and heavy-light hole mixing of multiparticle complexes in weakly confining systems, underlining the deficiencies of commonly used models for the quantum-confined Stark effect.

A hybrid system of a semiconductor quantum dot single photon source and a rubidium quantum memory represents a promising architecture for future photonic quantum repeaters. One of the key challenges lies in matching the emission frequency of quantum dots with the transition frequency of rubidium atoms while preserving the relevant emission properties. Here, we demonstrate the bidirectional frequency-tuning of the emission from a narrow-linewidth (close-to-transform-limited) quantum dot. The frequency tuning is based on a piezoelectric strain-amplification device, which can apply significant stress to thick bulk samples. The induced strain shifts the emission frequency of the quantum dot over a total range of $1.15\ \text{THz}$, about three orders of magnitude larger than its linewidth. Throughout the whole tuning process, both the spectral properties of the quantum dot and its single-photon emission characteristics are preserved. Our results show that external stress can be used as a promising tool for reversible frequency tuning of high-quality quantum dots and pave the wave towards the realisation of a quantum dot -- rubidium atoms interface for quantum networking., Comment: 6 pages, 3 figures

Hybrid systems consisting of a quantum emitter coupled to a mechanical oscillator are receiving increasing attention for fundamental science and potential applications in quantum technologies. In contrast to most of the presented works, in which the oscillator eigenfrequencies are irreversibly determined by the fabrication process, we present here a simple approach to obtain frequency-tunable mechanical resonators based on suspended nanomembranes. The method relies on a micromachined piezoelectric actuator, which we use both to drive resonant oscillations of a suspended Ga(Al)As membrane with embedded quantum dots and to fine tune their mechanical eigenfrequencies. Specifically, we excite oscillations with frequencies of at least 60 MHz by applying an AC voltage to the actuator and tune the eigenfrequencies by at least 25 times their linewidth by continuously varying the elastic stress state in the membranes through a DC voltage. The light emitted by optically excited quantum dots is used as sensitive local strain gauge to monitor the oscillation frequency and amplitude. We expect that our method has the potential to be applicable to other optomechanical systems based on dielectric and semiconductor membranes possibly operating in the quantum regime., Comment: 17 pages, 4 figures

A semiconductor quantum dot (QD) can generate highly indistinguishable single-photons at a high rate. For application in quantum communication and integration in hybrid systems, control of the QD optical properties is essential. Understanding the connection between the optical properties of a QD and the growth process is therefore important. Here, we show for GaAs QDs, grown by infilling droplet-etched nano-holes, that the emission wavelength, the neutral-to-charged exciton splitting, and the diamagnetic shift are strongly correlated with the capture zone-area, an important concept from nucleation theory. We show that the capture-zone model applies to the growth of this system even in the limit of a low QD-density in which atoms diffuse over $\mu$m-distances. The strong correlations between the various QD parameters facilitate preselection of QDs for applications with specific requirements on the QD properties; they also suggest that a spectrally narrowed QD distribution will result if QD growth on a regular lattice can be achieved.

The optical selection rules in epitaxial quantum dots are strongly influenced by the orientation of their natural quantization axis, which is usually parallel to the growth direction. This configuration is well suited for vertically emitting devices, but not for planar photonic circuits because of the poorly controlled orientation of the transition dipoles in the growth plane. Here we show that the quantization axis of gallium arsenide dots can be flipped into the growth plane via moderate in plane uniaxial stress. By using piezoelectric strain actuators featuring strain-amplification we study the evolution of the selection rules and excitonic fine-structure in a regime, in which quantum confinement can be regarded as a perturbation compared to strain in determining the symmetry properties of the system. The experimental and computational results suggest that uniaxial stress, may be the right tool to obtain quantum light sources with ideally oriented transition dipoles and enhanced oscillator strengths for integrated quantum photonics., Comment: 44 pages, 17 figures (including supplementary information)

We report on a fast, bandwidth-tunable single-photon source based on an epitaxial GaAs quantum dot. Exploiting spontaneous spin-flip Raman transitions, single photons at $780\,$nm are generated on-demand with tailored temporal profiles of durations exceeding the intrinsic quantum dot lifetime by up to three orders of magnitude. Second-order correlation measurements show a low multi-photon emission probability ($g^{2}(0)\sim\,0.10-0.15$) at a generation rate up to $10\,$MHz. We observe Raman photons with linewidths as low as $200\,$MHz, narrow compared to the $1.1\,$GHz linewidth measured in resonance fluorescence. The generation of such narrow-band single photons with controlled temporal shapes at the rubidium wavelength is a crucial step towards the development of an optimized hybrid semiconductor-atom interface., Comment: 8 pages, 4 figures

We investigate the effect of blinking on the two-photon interference measurement from two independent quantum emitters. We find that blinking significantly alters the statistics in the second-order intensity correlation function g$^{(2)}(\tau)$ and the outcome of two-photon interference measurements performed with independent quantum emitters. We theoretically demonstrate that the presence of blinking can be experimentally recognized by a deviation from the g$^{(2)}_{D}(0)=0.5$ value when distinguishable photons impinge on a beam splitter. Our results show that blinking imposes a mandatory cross-check measurement to correctly estimate the degree of indistinguishablility of photons emitted by independent quantum emitters.

Photonic quantum technologies are on the verge of finding applications in everyday life with quantum cryptography and the quantum internet on the horizon. Extensive research has been carried out to determine suitable quantum emitters and single epitaxial quantum dots are emerging as near-optimal sources of bright, on-demand, highly indistinguishable single photons and entangled photon pairs. In order to build up quantum networks, it is now essential to interface remote quantum emitters. However, this is still an outstanding challenge, as the quantum states of dissimilar 'artificial atoms' have to be prepared on-demand with high fidelity, and the generated photons have to be made indistinguishable in all possible degrees of freedom. Here, we overcome this major obstacle and show an unprecedented two-photon interference (visibility of 51+/-5%) from remote strain-tunable GaAs quantum dots, emitting on-demand photon-pairs. We achieve this result by exploiting for the first time the full potential of the novel phonon-assisted two-photon excitation scheme, which allows for the generation of highly indistinguishable (visibility of 71+/-9%) entangled photon-pairs (fidelity of 90+/-2%), it enables push-to button biexciton state preparation (fidelity of 80+/-2%) and it outperforms conventional resonant two-photon excitation schemes in terms of robustness against environmental decoherence. Our results mark an important milestone for the practical realization of quantum repeaters and complex multi-photon entanglement experiments involving dissimilar artificial atoms.

Quantum photonics holds great promise for future technologies such as secure communication, quantum computation, quantum simulation, and quantum metrology. An outstanding challenge for quantum photonics is to develop scalable miniature circuits that integrate single-photon sources, linear optical components, and detectors on a chip. Plasmonic nanocircuits will play essential roles in such developments. Plasmonic components feature ultracompact geometries and can be controlled more flexibly and more energy-efficiently compared to conventional dielectric components due to strong field confinement and enhancement. Moreover, plasmonic components are compatible with electronic circuits, thanks to their deep subwavelength sizes as well as their electrically conducting materials. However, for quantum plasmonic circuits, integration of stable, bright, and narrow-band single photon sources in the structure has so far not been reported. Here we present a quantum plasmonic nanocircuit driven by a self-assembled GaAs quantum dot. The quantum dot efficiently excites narrow-band single plasmons that are guided in a two-wire transmission line until they are converted into single photons by an optical antenna. Our work demonstrates the feasibility of fully on-chip plasmonic nanocircuits for quantum optical applications.

The development of scalable sources of non-classical light is fundamental to unlock the technological potential of quantum photonics\cite{Kimble:Nat2008}. Among the systems under investigation, semiconductor quantum dots are currently emerging as near-optimal sources of indistinguishable single photons. However, their performances as sources of entangled-photon pairs are in comparison still modest. Experiments on conventional Stranski-Krastanow InGaAs quantum dots have reported non-optimal levels of entanglement and indistinguishability of the emitted photons. For applications such as entanglement teleportation and quantum repeaters, both criteria have to be met simultaneously. In this work, we show that this is possible focusing on a system that has received limited attention so far: GaAs quantum dots grown via droplet etching. Using a two-photon resonant excitation scheme, we demonstrate that these quantum dots can emit triggered polarization-entangled photons with high purity (g^(2)(0)=0.002 +/-0.002), high indistinguishability (0.93 +/-0.07) and high entanglement fidelity (0.94 +/-0.01). Such unprecedented degree of entanglement, which in contrast to InGaAs can theoretically reach near-unity values, allows Bell's inequality (2.64 +/-0.01) to be violated without the aid of temporal or spectral filtering. Our results show that if quantum-dot entanglement resources are to be used for future quantum technologies, GaAs might be the system of choice., Comment: 10 pages, 3 figures

We demonstrate the first wavelength-tunable electrically-pumped source of non-classical light that can emit photons with wavelength in resonance with the D2 transitions of 87Rb atoms. The device is fabricated by integrating a novel GaAs single-quantum-dot light-emitting-diode (LED) onto a piezoelectric actuator. By feeding the emitted photons into a 75-mm-long cell containing warm 87Rb atom vapor, we observe slow-light with a temporal delay of up to 3.4 ns. In view of the possibility of using 87Rb atomic vapors as quantum memories, this work makes an important step towards the realization of hybrid-quantum systems for future quantum networks.

We report results important for the creation of a best-of-both-worlds quantum hybrid system consisting of a solid-state source of single photons and an atomic ensemble as quantum memory. We generate single photons from a GaAs quantum dot (QD) frequency-matched to the Rb D2-transitions and then use the Rb transitions to analyze spectrally the quantum dot photons. We demonstrate lifetime-limited QD linewidths (1.48 GHz) with both resonant and non-resonant excitation. The QD resonance fluorescence in the low power regime is dominated by Rayleigh scattering, a route to match quantum dot and Rb atom linewidths and to shape the temporal wave packet of the QD photons. Noise in the solid-state environment is relatively benign: there is a blinking of the resonance fluorescence at MHz rates but negligible upper state dephasing of the QD transition. We therefore establish a close-to-ideal solid-state source of single photons at a key wavelength for quantum technologies.

Triggered sources of entangled photons play crucial roles in almost any existing protocol of quantum information science. The possibility to generate these non-classical states of light with high speed and using electrical pulses could revolutionize the field. Entangled-light-emitting-diodes (ELEDs) based on semiconductor quantum dots (QDs) are at present the only devices that can address this task 5. However, ELEDs are plagued by a source of randomness that hampers their practical exploitation in the foreseen applications: the very low probability (~10-2) of finding QDs with sufficiently small fine-structure-splitting for entangled-photon-generation. Here, we overcome this hurdle by introducing the first strain-tunable ELEDs (S-ELEDs) that exploit piezoelectric-induced strains to tune QDs for entangled-photon-generation. We demonstrate that up to 30% of the QDs in S-ELEDs emit polarization-entangled photon pairs with entanglement-fidelities as high as f+ = 0.83(5). Driven at the highest operation speed of 400 MHz ever reported so far, S-ELEDs emerge as unique devices for high-data rate entangled-photon applications., Comment: 28 pages in total, including supplementary information. 5 figures