Search

It is difficult to produce reliable polar strain elastograms (radial and circumferential) because the center of the carotid artery is typically unknown. Principal strain imaging can overcome this limitation, but suboptimal lateral displacement estimates make this an impractical approach for visualizing mechanical properties within the carotid artery. We hypothesized that compounded plane wave imaging can minimize this problem. To test this hypothesis, we performed (i) simulations with vessels of varying morphology and mechanical behavior (i.e., isotropic and transversely isotropic), and (ii) a pilot study with 10 healthy volunteers. The accuracy of principal and polar strain (computed using knowledge of the precise vessel center) elastograms varied between 7% and 17%. In both types of elastograms, strain concentrated at the junction between the fibrous cap and the vessel wall, and the strain magnitude decreased with increasing fibrous cap thickness. Elastograms of healthy volunteers were consistent with those of transversely isotropic homogeneous vessels; they were spatially asymmetric, a trend that was common to both principal and polar strains. No significant differences were observed in the mean strain recovered from principal and polar strains (p > 0.05). This investigation indicates that principal strain elastograms measured with compounding plane wave imaging overcome the problems incurred when polar strain elastograms are computed with imprecise estimates of the vessel center., (Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)

Imaging plaque microvasculature with contrast-enhanced intravascular ultrasound (IVUS) could help clinicians evaluate atherosclerosis and guide therapeutic interventions. In this study, we evaluated the performance of chirp-coded ultraharmonic imaging using a modified IVUS system (iLab™, Boston Scientific/Scimed) equipped with clinically available peripheral and coronary imaging catheters. Flow phantoms perfused with a phospholipid-encapsulated contrast agent were visualized using ultraharmonic imaging at 12 MHz and 30 MHz transmit frequencies. Flow channels with diameters as small as 0.8 mm and 0.5 mm were visualized using the peripheral and coronary imaging catheters. Radio-frequency signals were acquired at standard IVUS rotation speed, which resulted in a frame rate of 30 frames/s. Contrast-to-tissue ratios up to 17.9 ± 1.11 dB and 10.7 ± 2.85 dB were attained by chirp-coded ultraharmonic imaging at 12 MHz and 30 MHz transmit frequencies, respectively. These results demonstrate the feasibility of performing ultraharmonic imaging at standard frame rates with clinically available IVUS catheters using chirp-coded excitation., (© The Author(s) 2015.)

Model-based intravascular ultrasound elastography visualizes the stress distribution within vascular tissue-information that clinicians could use to predict the propensity of atherosclerotic plaque rupture. However, there are concerns that clusters of microvessels may reduce the accuracy of the estimated stress distribution. Consequently, we have developed a contrast-enhanced intravascular ultrasound system to investigate how plaque microvasculature affects the performance of model-based elastography. In simulations, diameters of 200, 400 and 800 μm were used, where the latter diameter represented a cluster of microvessels. In phantoms, we used a microvessel with a diameter of 750 μm. Peak stress errors of 3% and 38% were incurred in the fibrous cap when stress recovery was performed with and without a priori information about microvessel geometry. The results indicate that incorporating geometric information about plaque microvasculature obtained with contrast-enhanced ultrasound imaging improves the accuracy of estimates of the stress distribution within the fibrous cap precisely., (Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.)

Quantitative sparse array vascular elastography visualizes the shear modulus distribution within vascular tissues, information that clinicans could use to reduce the number of strokes each year. However, the low transmit power sparse array (SA) imaging could hamper the clinical usefulness of the resulting elastograms. In this study, we evaluated the performance of modulus elastograms recovered from simulated and physical vessel phantoms with varying attenuation coefficients (0.6, 1.5, and [Formula: see text]) and modulus contrasts ([Formula: see text], [Formula: see text], and [Formula: see text]) using SA imaging relative to those obtained with conventional linear array (CLA) and plane-wave (PW) imaging techniques. Plaques were visible in all modulus elastograms, but those produced using SA and PW contained less artifacts. The modulus contrast-to-noise ratio decreased rapidly with increasing modulus contrast and attenuation coefficient, but more quickly when SA imaging was performed than for CLA or PW. The errors incurred varied from 10.9% to 24% (CLA), 1.8% to 12% (SA), and [Formula: see text] (PW). Modulus elastograms produced with SA and PW imagings were not significantly different ([Formula: see text]). Despite the low transmit power, SA imaging can produce useful modulus elastograms in superficial organs, such as the carotid artery.