Search

The wake of a horizontal-axis wind turbine was studied at $Re_D=4\times10^6$ with the aim of revealing the effects of the tip speed ratio, $\lambda$, on the wake. Tip speed ratios of $4<\lambda<7$ were investigated and measurements were acquired up to 6.5 diameters downstream of the turbine. Through an investigation of the turbulent statistics, it is shown that the wake recovery was accelerated due to the higher turbulence levels associated with lower tip speed ratios. The energy spectra indicate that larger broadband turbulence levels at lower tip speed ratios contributes to a more rapidly recovering wake. Wake meandering and a coherent core structure were also studied, and it is shown that these flow features are tip speed ratio invariant, when considering their Strouhal numbers. This finding contradicts some previous studies regarding the core structure, indicating that the structure was formed by a bulk rotor geometric feature, rather than by the rotating blades. Finally, the core structure was shown to persist farther into the near wake with decreasing tip speed ratio. The structure's lifetime is hypothesized to be related to its strength relative to the turbulence in the core, which decreases with increasing tip speed ratio.

Direct numerical simulations are performed of turbulent forced convection in a half channel flow with wall oscillating either as a spanwise plane oscillation or to generate a streamwise travelling wave. The friction Reynolds number is fixed at $Re_{\tau_0} = 590$, but the Prandtl number $Pr$ is varied from 0.71 to 20. For $Pr>1$, the heat transfer is reduced by more than the drag, 40\% compared to 30\% at $Pr=7.5$. This outcome is related to the different responses of the velocity and thermal fields to the Stokes layer. It is shown that the Stokes layer near the wall attenuates the large-scale energy of the turbulent heat-flux and the turbulent shear-stress, but amplifies their small-scale energy. At higher Prandtl numbers, the thinning of the conductive sublayer means that the energetic scales of the turbulent heat-flux move closer to the wall, where they are exposed to a stronger Stokes layer production, increasing the contribution of the small-scale energy amplification. A predictive model is derived for the Reynolds and Prandtl number dependence of the heat-transfer reduction based on the scaling of the thermal statistics. The model agrees well with the computations for Prandtl numbers up to 20.

Lubricated textured surfaces immersed in liquid flows offer tremendous potential for reducing fluid drag, enhancing heat and mass transfer, and preventing fouling. According to current design rules, the lubricant must chemically match the surface to remain robustly trapped within the texture. However, achieving such chemical compatibility poses a significant challenge for large-scale flow systems, as it demands advanced surface treatments or severely limits the range of viable lubricants. In addition, chemically tuned surfaces often degrade over time in harsh environments. Here, we demonstrate that a lubricant-infused surface (LIS) can resist drainage in the presence of external shear flow without requiring chemical compatibility. Surfaces featuring longitudinal grooves can retain up to 50% of partially wetting lubricants in fully developed turbulent flows. The retention relies on contact-angle hysteresis, where triple-phase contact lines are pinned to substrate heterogeneities, creating capillary resistance that prevents lubricant depletion. We develop an analytical model to predict the maximum length of pinned lubricant droplets in microgrooves. This model, validated through a combination of experiments and numerical simulations, can be used to design chemistry-free LISs for applications where the external environment is continuously flowing. Our findings open up new possibilities for using functional surfaces to control transport processes in large systems., Comment: 20 pages, 12 figures

A turbulent pipe flow experiment was conducted where the surface of the pipe was oscillated azimuthally over a wide range of frequencies, amplitudes and Reynolds number. The drag was reduced by as much as 30\%. Past work has suggested that the drag reduction scales with the velocity amplitude of the motion, its period, or the Reynolds number. Here, we find that the key parameter is simply the acceleration, which reduces the complexity of the phenomenon by two orders of magnitude. This insight opens new potential avenues for reducing fuel consumption by large vehicles and for reducing energy costs in large piping systems., Comment: 8 pages, 5 figures

Ensuring adequate ventilation of exterior and interior urban spaces is essential for the safety and comfort of inhabitants. Here, we examine how angled features can steer wind into areas with stagnant air, promoting natural ventilation. Using Large Eddy Simulations (LES) and wind tunnel experiments with particle image velocimetry (PIV) measurements, we first examine how louvers, located at the top of a box enclosed on four sides, can improve ventilation in the presence of incoming wind. By varying louver scale, geometry, and angle, we identify a geometric regime wherein louvers capture free-stream air to create sweeping interior flow structures, increasing the Air Exchange Rate (ACH) significantly above that for an equivalent box with an open top. We then show that non-homogeneous louver orientations enhance ventilation, accommodating winds from opposing directions, and address the generalization to taller structures. Finally, we demonstrate the feasibility of replacing louvers with lattice-cut kirigami ("cut paper"), which forms angled chutes when stretched in one direction, and could provide a mechanically preferable solution for adaptive ventilation. Our findings for this idealized system may inform the design of retrofits for urban structures -- e.g. canopies above street canyons, and "streeteries" or parklets -- capable of promoting ventilation, while simultaneously providing shade., Comment: 16 pages, 11 figures. Appendix: 2 pages, 1 figure

Unmanned aerial vehicles (UAVs) are finding use in applications that place increasing emphasis on robustness to external disturbances including extreme wind. However, traditional multirotor UAV platforms do not directly sense wind; conventional flow sensors are too slow, insensitive, or bulky for widespread integration on UAVs. Instead, drones typically observe the effects of wind indirectly through accumulated errors in position or trajectory tracking. In this work, we integrate a novel flow sensor based on micro-electro-mechanical systems (MEMS) hot-wire technology developed in our prior work onto a multirotor UAV for wind estimation. These sensors are omnidirectional, lightweight, fast, and accurate. In order to achieve superior tracking performance in windy conditions, we train a `wind-aware' residual-based controller via reinforcement learning using simulated wind gusts and their aerodynamic effects on the drone. In extensive hardware experiments, we demonstrate the wind-aware controller outperforming two strong `wind-unaware' baseline controllers in challenging windy conditions. See: https://youtu.be/KWqkH9Z-338., Comment: Submitted to ICRA 2023. See supplementary video at https://youtu.be/KWqkH9Z-338

Due to limitations in available sensor technology, unmanned aerial vehicles (UAVs) lack an active sensing capability to measure turbulence, gusts, or other unsteady aerodynamic phenomena. Conventional in situ anemometry techniques fail to deliver in the harsh and dynamic multirotor environment due to form factor, resolution, or robustness requirements. To address this capability gap, a novel, fast-response sensor system to measure a wind vector in two dimensions is introduced and evaluated. This system, known as `MAST' (for MEMS Anemometry Sensing Tower), leverages advances in microelectromechanical (MEMS) hot-wire devices to produce a solid-state, lightweight, and robust flow sensor suitable for real-time wind estimation onboard a UAV. The MAST uses five pentagonally-arranged microscale hot-wires to determine the wind vector's direction and magnitude. The MAST's performance was evaluated in a wind tunnel at speeds up to 5~m/s and orientations of 0 - 360 degrees. A neural network sensor model was trained from the wind tunnel data to estimate the wind vector from sensor signals. The average error of the sensor is 0.14 m/s for speed and 1.6 degrees for direction. Furthermore, 95% of measurements are within 0.36 m/s error for speed and 5.0 degree error for direction. With a bandwidth of 570 Hz determined from square-wave testing, the MAST stands to greatly enhance UAV wind estimation capabilities and enable capturing relevant high-frequency phenomena in flow conditions., Comment: 23 pages, 11+2 figures, under review

Liquid-infused surfaces (LIS) can reduce friction drag in both laminar and turbulent flows. However, the heat transfer properties of such multi-phase surfaces have still not been investigated to a large extent. We use numerical simulations to study conjugate heat transfer of liquid-filled grooves. It is shown that heat transfer can increase for both laminar and turbulent liquid flows due to recirculation in the surface texture. For the increase to be substantial, the thermal conductivity of the solid must be similar to the thermal conductivity of the fluids, and the recirculation in the grooves must be sufficiently strong (P\'eclet number larger than 1). The ratio of the surface cavity to the system height is an upper limit of the direct contribution from the recirculation. While this ratio can be significant for laminar flows in microchannels, it is limited for turbulent flows, where the system scale (e.g. channel height) usually is much larger than the texture height. However, heat transfer enhancement on the order of $10\%$ is observed (with a net drag reduction) in a turbulent channel flow at a friction Reynolds number $Re_\tau \approx 180$. It is shown that the turbulent convection in the bulk can be enhanced indirectly from the recirculation in the grooves., Comment: 23 pages, 14 figures

A new scaling is derived that yields a Reynolds number independent profile for all components of the Reynolds stress in the near-wall region of wall bounded flows, including channel, pipe and boundary layer flows. The scaling demonstrates the important role played by the wall shear stress fluctuations and how the large eddies determine the Reynolds number dependence of the near-wall turbulence behavior.

A new velocity scale is derived that yields a Reynolds number independent profile for the streamwise turbulent fluctuations in the near-wall region of wall bounded flows for $y^+<25$. The scaling demonstrates the important role played by the wall shear stress fluctuations and how the large eddies determine the Reynolds number dependence of the near-wall turbulence distribution.

Local dissipation scales are a manifestation of the intermittent small-scale nature of turbulence. We report the first experimental evaluation of the distribution of local dissipation scales in turbulent pipe flows for a range of Reynolds numbers, 2.4x10^4<=Re_D<=7.0x10^4. Our measurements at the nearly isotropic pipe centerline and within the anisotropic logarithmic layer show excellent agreement with distributions that were previously calculated from numerical simulations of homogeneous isotropic box turbulence and with those predicted by theory. The reported results suggest a universality of the smallest-scale fluctuations around the classical Kolmogorov dissipation length., Comment: 4 pages, 4 Postscript figures, Physical Review Letters, v1: accepted version, v2: published version, v3: replaced published version with authors' tex version to avoid copyright violation