Search

Next-generation X-ray observatories, such as the Lynx X-ray Observatory Mission Concept or other similar concepts in the coming decade, will require detectors with high quantum efficiency (QE) across the soft X-ray band to observe the faint objects that drive their mission science objectives. Hybrid CMOS Detectors (HCDs), a form of active-pixel sensor, are promising candidates for use on these missions because of their fast read-out, low power consumption, and intrinsic radiation hardness. In this work, we present QE measurements of a Teledyne H2RG HCD, performed using a gas-flow proportional counter as a reference detector. We find that this detector achieves high QE across the soft X-ray band, with an effective QE of $94.6 \pm 1.1 \%$ at the Mn K$\alpha$/K$\beta$ energies (5.90/6.49 keV), $98.3 \pm 1.9 \%$ at the Al K$\alpha$ energy (1.49 keV), $85.6 \pm 2.8 \%$ at the O K$\alpha$ energy (0.52 keV), and $61.3 \pm 1.1 \%$ at the C K$\alpha$ energy (0.28 keV). These values are in good agreement with our model, based on the absorption of detector layers. We find similar results in a more restrictive analysis considering only high-quality events, with only somewhat reduced QE at lower energies., Comment: 21 pages, 14 figures. Published in the Journal of Astronomical Telescopes, Instruments, and Systems. This work is an expansion of arXiv:2110.01531

Next-generation X-ray observatories, such as the Lynx X-ray Observatory Mission Concept, will require detectors with high quantum efficiency (QE) across the soft X-ray band to observe the faint objects that drive their mission science cases. Hybrid CMOS Detectors (HCDs), a form of active-pixel sensor, are promising candidates for use on these missions because of their faster read-out, lower power consumption, and greater radiation hardness than detectors used in the current generation of X-ray telescopes. In this work, we present QE measurements of a Teledyne H2RG HCD. These measurements were performed using a gas-flow proportional counter as a reference detector to measure the absolute flux incident on the HCD. We find an effective QE of $95.0 \pm 1.1\%$ at the Mn K$\alpha$/K$\beta$ lines (at 5.9 and 6.5 keV), $98.5 \pm 1.8\%$ at the Al K$\alpha$ line (1.5 keV), and $85.0 \pm 2.8\%$ at the O K$\alpha$ line (0.52 keV)., Comment: 11 pages, 8 figures, appears in Proc. SPIE 2021

X-ray hybrid CMOS detectors (HCDs) are a promising candidate for future x-ray missions requiring high throughput and fine angular resolution along with large field-of-view, such as the high-definition x-ray imager (HDXI) instrument on the Lynx x-ray surveyor mission concept. These devices offer fast readout capability, low power consumption, and radiation hardness while maintaining high detection efficiency from 0.2 to 10 keV. In addition, x-ray hybrid CMOS sensors may be fabricated with small pixel sizes to accommodate high-resolution optics and have shown great improvements in recent years in noise and spectral resolution performance. In particular, 12.5-{\mu}m pitch prototype devices that include in-pixel correlated double sampling capability and crosstalk eliminating capacitive transimpedance amplifiers, have been fabricated and tested. These detectors have achieved read noise as low as 5.4 e-, and we measure the best energy resolution to be 148 eV (2.5%) at 5.9 keV and 78 eV (14.9%) at 0.53 keV. We will describe the characterization of these prototype small-pixel x-ray HCDs, and we will discuss their applicability to the HDXI instrument on Lynx., Comment: 11 pages, 13 figures. Published in the Journal of Astronomical Telescopes, Instruments, and Systems

When an X-ray is incident onto the silicon absorber array of a detector, it liberates a large number of electrons, which tend to diffuse outward into what is referred to as the charge cloud. This number can vary from tens to thousands across the soft X-ray bandpass (0.1 - 10 keV). The charge cloud can then be picked up by several pixels, and forms a specific pattern based on the exact incident location of the X-ray. We present experimental results on subpixel resolution for a custom H2RG with 36 micron pixels, presented in Bray 2018, and compare the data to simulated images . We then apply the model simulation to a prototype small pixel hybrid CMOS detector (HCD) that would be suitable for the Lynx X-ray surveyor. We also discuss the ability of a small pixel detector to obtain subpixel resolution.

The Penn State X-ray detector lab, in collaboration with Teledyne Imaging Sensors (TIS), have progressed their efforts to improve soft X-ray Hybrid CMOS detector (HCD) technology on multiple fronts. Having newly acquired a Teledyne cryogenic SIDECAR ASIC for use with HxRG devices, measurements were performed with an H2RG HCD and the cooled SIDECAR. We report new energy resolution and read noise measurements, which show a significant improvement over room temperature SIDECAR operation. Further, in order to meet the demands of future high-throughput and high spatial resolution X-ray observatories, detectors with fast readout and small pixel sizes are being developed. We report on characteristics of new X-ray HCDs with 12.5 micron pitch that include in-pixel CDS circuitry and crosstalk-eliminating CTIA amplifiers. In addition, PSU and TIS are developing a new large-scale array Speedster-EXD device. The original 64 x 64 pixel Speedster-EXD prototype used comparators in each pixel to enable event driven readout with order of magnitude higher effective readout rates, which will now be implemented in a 550 x 550 pixel device. Finally, the detector lab is involved in a sounding rocket mission that is slated to fly in 2018 with an off-plane reflection grating array and an H2RG X-ray HCD. We report on the planned detector configuration for this mission, which will increase the NASA technology readiness level of X-ray HCDs to TRL 9., Comment: 12 pages, 11 figures, appears in Proc. SPIE 2017. error in reported detector thickness, changed from 200 microns to 100 microns