Search

Abstract Digital Micromirror Devices, extensively employed in projection displays offer rapid, polarization-independent beam steering. However, they are constrained by microelectromechanical system limitations, resulting in reduced resolution, limited beam steering angle and poor stability, which hinder further performance optimization. Liquid Crystal on Silicon technology, employing liquid crystal (LC) and silicon chip technology, with properties of high resolution, high contrast and good stability. Nevertheless, its polarization-dependent issues lead to complex system and low efficiency in device applications. This paper introduces a hybrid integration of metallic metasurface with nematic LC, facilitating a polarization-independent beam steering device capable of large-angle deflections. Employing principles of geometrical phase and plasmonic resonances, the metallic metasurface, coupled with an electronically controlled LC, allows for dynamic adjustment, achieving a maximum deflection of ± 27.1°. Additionally, the integration of an LC-infused dielectric grating for dynamic phase modulation and the metasurface for polarization conversion ensures uniform modulation effects across all polarizations within the device. We verify the device’s large-angle beam deflection capability and polarization insensitivity effect in simulations and propose an optimization scheme to cope with the low efficiency of individual diffraction stages.

Abstract The vectorial optical field (VOF) assumes a pivotal role in light-matter interactions. Beyond its inherent polarization topology, the VOF also encompasses an intrinsic degree of freedom associated with parity (even or odd), corresponding to a pair of degenerate orthogonal modes. However, previous research has not delved into the simultaneous manipulation of both even and odd parities. In this study, we introduce and validate the previously unexplored parity Hall effect for vectorial modes using a metasurface design. Our focus lies on a cylindrical vector beam (CVB) as a representative case. Through the tailored metasurface, we effectively separate two degenerate CVBs with distinct parities in divergent directions, akin to the observed spin states split in the spin Hall effect. Additionally, we provide experimental evidence showcasing the capabilities of this effect in multi-order CVB demultiplexing and parity-demultiplexed CVB-encoded holography. This effect unveils promising opportunities for various applications, including optical communication and imaging.

Abstract Reducing the silver film to 10 nm theoretically allows higher transparency but in practice leads to degraded transparency and electrical conductivity because the ultrathin film tends to be discontinuous. Herein, we developed a thinning-back process to address this dilemma, in which silver film is first deposited to a larger thickness with high continuity and then thinned back to a reduced thickness with an ultrasmooth surface, both implemented by a flood ion beam. Contributed by the shallow implantation of silver atoms into the substrate during deposition, the thinness of silver films down to 4.5 nm can be obtained, thinner than ever before. The atomic-level surface smooth permits excellent visible transparency, electrical conductivity, and the lowest haze among all existing transparent conductors. Moreover, the ultrathin silver film exhibits the unique robustness of mechanical flexibility. Therefore, the ion-beam thinning-back process presents a promising solution towards the excellent transparent conductor for flexible optoelectronic devices.

Abstract To enhance the efficiency of catalysis, it is crucial to comprehend the behavior of individual nanowires/nanosheets. A developed on-chip microcell facilitates this study by creating a reaction window that exposes the catalyst region of interest. However, this technology’s potential application is limited due to frequently-observed variations in data between different cells. In this study, we identify a conductance problem in the reaction windows of non-metallic catalysts as the cause of this issue. We investigate this problem using in-situ electronic/electrochemical measurements and atom-thin nanosheets as model catalysts. Our findings show that a full-open window, which exposes the entire catalyst channel, allows for efficient modulation of conductance, which is ten times higher than a half-open window. This often-overlooked factor has the potential to significantly improve the conductivity of non-metallic catalysts during the reaction process. After examining tens of cells, we develop a vertical microcell strategy to eliminate the conductance issue and enhance measurement reproducibility. Our study offers guidelines for conducting reliable microcell measurements on non-metallic single nanowire/nanosheet catalysts.

Abstract Dispersion decomposes compound light into its monochromatic components, which is detrimental to broadband imaging but advantageous for spectroscopic applications. Metasurfaces provide a unique path to modulate the dispersion by adjusting structural parameters on a two-dimensional plane. However, conventional linear phase compensation does not adequately match the meta-unit’s dispersion characteristics with required complex dispersion, hindering at-will dispersion engineering over a very wide bandwidth particularly. Here, we propose an asymptotic phase compensation strategy for ultra-broadband dispersion-controlled metalenses. Metasurfaces with extraordinarily high aspect ratio nanostructures have been fabricated for arbitrary dispersion control in ultra-broad bandwidth, and we experimentally demonstrate the single-layer achromatic metalenses in the visible to infrared spectrum (400 nm~1000 nm, NA = 0.164). Our proposed scheme provides a comprehensive theoretical framework for single-layer meta-optics, allowing for arbitrary dispersion manipulation without bandwidth restrictions. This development is expected to have significant applications in ultra-broadband imaging and chromatography detection, among others.

Abstract Metasurfaces can perform high-performance multi-functional integration by manipulating the abundant physical dimensions of light, demonstrating great potential in high-capacity information technologies. The orbital angular momentum (OAM) and spin angular momentum (SAM) dimensions have been respectively explored as the independent carrier for information multiplexing. However, fully managing these two intrinsic properties in information multiplexing remains elusive. Here, we propose the concept of angular momentum (AM) holography which can fully synergize these two fundamental dimensions to act as the information carrier, via a single-layer, non-interleaved metasurface. The underlying mechanism relies on independently controlling the two spin eigenstates and arbitrary overlaying them in each operation channel, thereby spatially modulating the resulting waveform at will. As a proof of concept, we demonstrate an AM meta-hologram allowing the reconstruction of two sets of holographic images, i.e., the spin-orbital locked and the spin-superimposed ones. Remarkably, leveraging the designed dual-functional AM meta-hologram, we demonstrate a novel optical nested encryption scheme, which is able to achieve parallel information transmission with ultra-high capacity and security. Our work opens a new avenue for optionally manipulating the AM, holding promising applications in the fields of optical communication, information security and quantum science.

Surface acoustic wave (SAW) technology has been extensively explored for wireless communication, sensors, microfluidics, photonics, and quantum information processing. However, due to fabrication issues, the frequencies of SAW devices are typically limited to within a few gigahertz, which severely restricts their applications in 5G communication, precision sensing, photonics, and quantum control. To solve this critical problem, we propose a hybrid strategy that integrates a nanomanufacturing process (i.e., nanolithography) with a LiNbO3/SiO2/SiC heterostructure and successfully achieve a record-breaking frequency of about 44 GHz for SAW devices, in addition to large electromechanical coupling coefficients of up to 15.7%. We perform a theoretical analysis and identify the guided higher order wave modes generated on these slow-on-fast SAW platforms. To demonstrate the superior sensing performance of the proposed ultra-high-frequency SAW platforms, we perform micro-mass sensing and obtain an extremely high sensitivity of approximately 33151.9 MHz·mm2·μg−1, which is about 1011 times higher than that of a conventional quartz crystal microbalance (QCM) and about 4000 times higher than that of a conventional SAW device with a frequency of 978 MHz.

Abstract Surface acoustic wave (SAW) technology has been widely developed for ultraviolet (UV) detection due to its advantages of miniaturization, portability, potential to be integrated with microelectronics, and passive/wireless capabilities. To enhance UV sensitivity, nanowires (NWs), such as ZnO, are often applied to enhance SAW-based UV detection due to their highly porous and interconnected 3D network structures and good UV sensitivity. However, ZnO NWs are normally hydrophilic, and thus, changes in environmental parameters such as humidity will significantly influence the detection precision and sensitivity of SAW-based UV sensors. To solve this issue, in this work, we proposed a new strategy using ZnO NWs wrapped with hydrophobic silica nanoparticles as the effective sensing layer. Analysis of the distribution and chemical bonds of these hydrophobic silica nanoparticles showed that numerous C-F bonds (which are hydrophobic) were found on the surface of the sensitive layer, which effectively blocked the adsorption of water molecules onto the ZnO NWs. This new sensing layer design minimizes the influence of humidity on the ZnO NW-based UV sensor within the relative humidity range of 10–70%. The sensor showed a UV sensitivity of 9.53 ppm (mW/cm2)−1, with high linearity (R 2 value of 0.99904), small hysteresis (

Abstract There are great concerns for sensing using flexible acoustic wave sensors and lab-on-a-chip, as mechanical strains will dramatically change the sensing signals (e.g., frequency) when they are bent during measurements. These strain-induced signal changes cannot be easily separated from those of real sensing signals (e.g., humidity, ultraviolet, or gas/biological molecules). Herein, we proposed a new strategy to minimize/eliminate the effects of mechanical bending strains by optimizing off-axis angles between the direction of bending deformation and propagation of acoustic waves on curved surfaces of layered piezoelectric film/flexible glass structure. This strategy has theoretically been proved by optimization of bending designs of off-axis angles and acoustically elastic effect. Proof-of-concept for humidity and ultraviolet-light sensing using flexible SAW devices with negligible interferences are achieved within a wide range of bending strains. This work provides the best solution for achieving high-performance flexible acoustic wave sensors under deformed/bending conditions.

Optical imaging systems have greatly extended human visual capabilities, enabling the observation and understanding of diverse phenomena. Imaging technologies span a broad spectrum of wavelengths from x-ray to radio frequencies and impact research activities and our daily lives. Traditional glass lenses are fabricated through a series of complex processes, while polymers offer versatility and ease of production. However, modern applications often require complex lens assemblies, driving the need for miniaturization and advanced designs with micro- and nanoscale features to surpass the capabilities of traditional fabrication methods. Three-dimensional (3D) printing, or additive manufacturing, presents a solution to these challenges with benefits of rapid prototyping, customized geometries, and efficient production, particularly suited for miniaturized optical imaging devices. Various 3D printing methods have demonstrated advantages over traditional counterparts, yet challenges remain in achieving nanoscale resolutions. Two-photon polymerization lithography (TPL), a nanoscale 3D printing technique, enables the fabrication of intricate structures beyond the optical diffraction limit via the nonlinear process of two-photon absorption within liquid resin. It offers unprecedented abilities, e.g. alignment-free fabrication, micro- and nanoscale capabilities, and rapid prototyping of almost arbitrary complex 3D nanostructures. In this review, we emphasize the importance of the criteria for optical performance evaluation of imaging devices, discuss material properties relevant to TPL, fabrication techniques, and highlight the application of TPL in optical imaging. As the first panoramic review on this topic, it will equip researchers with foundational knowledge and recent advancements of TPL for imaging optics, promoting a deeper understanding of the field. By leveraging on its high-resolution capability, extensive material range, and true 3D processing, alongside advances in materials, fabrication, and design, we envisage disruptive solutions to current challenges and a promising incorporation of TPL in future optical imaging applications.

Abstract Current state-of-the-art stretchable/flexible sensors have received stringent demands on sensitivity, flexibility, linearity, and wide-range measurement capability. Herein, we report a methodology of strain sensors based on graphene/Ecoflex composites by modulating multiscale/hierarchical wrinkles on flexible substrates. The sensor shows an ultra-high sensitivity with a gauge factor of 1078.1, a stretchability of 650%, a response time of ~140 ms, and a superior cycling durability. It can detect wide-range physiological signals including vigorous body motions, pulse monitoring and speech recognition, and be used for monitoring of human respirations in real-time using a cloud platform, showing a great potential for the healthcare internet of things. Complex gestures/sign languages can be precisely detected. Human-machine interface is demonstrated by using a sensor-integrated glove to remotely control an external manipulator to remotely defuse a bomb. This study provides strategies for real-time/long-range medical diagnosis and remote assistance to perform dangerous tasks in industry and military fields.

This review outlines the exciting developments in high-performance dielectric metalenses whilst highlighting the challenges of using dielectric metalenses to replace conventional optics in miniature optical systems.

A polarization-multiplexed metasurface-enabled diffractive neural network, which is integrated with a CMOS imaging sensor, demonstrates on-chip multi-channel sensing and multitasking in the visible.

Optical gyromagnetic properties are not observed in natural or metamaterials to date. Here, the authors experimentally demonstrated optical gyromagnetic properties in a magneto-plasmonic metamaterial, realizing the long-sought bi-gyrotropic medium.

Mid-infrared antennas (MIRAs) support highly-efficient optical resonance in the infrared, enabling multiple applications, such as surface-enhanced infrared absorption (SEIRA) spectroscopy and ultrasensitive mid-infrared detection. However, most MIRAs such as dipolar-antenna structures support only narrow-band dipolar-mode resonances while high-order modes are usually too weak to be observed, severely limiting other useful applications that broadband resonances make possible. In this study, we report a multiscale nanobridged rhombic antenna (NBRA) that supports two dominant resonances in the MIR, including a charge-transfer plasmon (CTP) band and a bridged dipolar plasmon (BDP) band which looks like a quadruple resonance. These assignments are evidenced by scattering-type scanning near-field optical microscopy (s-SNOM) imaging and electromagnetic simulations. The high-order mode only occurs with nanometer-sized bridge (nanobridge) linked to the one end of the rhombic arm which mainly acts as the inductance and the resistance by the circuit analysis. Moreover, the main hotspots associated with the two resonant bands are spatially superimposed, enabling boosting up the local field for both bands by multiscale coupling. With large field enhancements, multiband detection with high sensitivity to a monolayer of molecules is achieved when using SEIRA. Our work provides a new strategy possible to activate high-order modes for designing multiband MIRAs with both nanobridges and nanogaps for such MIR applications as multiband SEIRAs, IR detectors, and beam-shaping of quantum cascade lasers in the future.

Abstract Flexible surface acoustic wave (SAW) devices have recently attracted tremendous attention for their widespread application in sensing and microfluidics. However, for these applications, SAW devices often need to be bent into off-axis deformations between the acoustic wave propagation direction and bending direction. Currently, there are few studies on this topic, and the bending mechanisms during off-axis bending deformations have remained unexplored for multisensing applications. Herein, we fabricated aluminum nitride (AlN) flexible SAW devices by using high-quality AlN films deposited on flexible glass substrates and systematically investigated their complex deformation behaviors. A theoretical model was first developed using coupling wave equations and the boundary condition method to analyze the characteristics of the device with bending and off-axis deformation under elastic strains. The relationships between the frequency shifts of the SAW device and the bending strain and off-axis angle were obtained, and the results were identical to those from the theoretical calculations. Finally, we performed proof-of-concept demonstrations of its multisensing potential by monitoring human wrist movements at various off-axis angles and detecting UV light intensities on a curved surface, thus paving the way for the application of versatile flexible electronics.

Simple and efficient nanofabrication technology with low cost and high flexibility is indispensable for fundamental nanoscale research and prototyping. Lithography in the near field using the surface plasmon polariton (i.e., plasmonic lithography) provides a promising solution. The system with high stiffness passive nanogap control strategy on a high-speed rotating substrate is one of the most attractive high-throughput methods. However, a smaller and steadier plasmonic nanogap, new scheme of plasmonic lens, and parallel processing should be explored to achieve a new generation high resolution and reliable efficient nanofabrication. Herein, a parallel plasmonic direct-writing nanolithography system is established in which a novel plasmonic flying head is systematically designed to achieve around 15 nm minimum flying-height with high parallelism at the rotating speed of 8–18 m·s−1. A multi-stage metasurface-based polarization insensitive plasmonic lens is proposed to couple more power and realize a more confined spot compared with conventional plasmonic lenses. Parallel lithography of the nanostructures with the smallest (around 26 nm) linewidth is obtained with the prototyping system. The proposed system holds great potential for high-freedom nanofabrication with low cost, such as planar optical elements and nano-electromechanical systems.

A space-variant information density three-dimensional display with ultrawide field of view is achieved by a large-scale 2D-metagrating complex, which shows great potential for portable electronic devices.

The effects of materials, geometric parameters, and morphologies on the absorption properties of absorbers with the cone-like nanostructures surrounded by water have been numerically studied. The underlying mechanisms of the perfect absorption of solar energy are revealed by gradient index effect with electric field distributions. It shows that the absorber achieves perfect absorption for solar energy harvesting with nanocones made of Chromium (Cr), Nickel (Ni), Platinum (Pt), Titanium (Ti), and Bismuth Telluride (Bi2Te3), while the perfect absorption wavelength region of absorbers with nanocones made of noble metals (Au, Ag) is 300 nm to around 650 nm, which is far narrower than the solar spectrum. In addition, geometric parameters of the nanocones on the surface of the metamaterials make a big difference on the absorption properties of them though there is a small tolerance. Besides, the morphology of the cone makes a little difference on the absorption properties of the absorber, and the absorptance of the absorber increases with the increase of the number of nanocone's sides. Furthermore, the solar absorber with nanocones is sensitive to the incident angle of the light with a small tolerance, but the polarization of the incident light almost makes no difference on the absorption property of the absorber with nanocones.

Seeking sensitive, large-scale, and low-cost substrates is highly important for practical applications of surface-enhanced Raman scattering (SERS) technology. Noble metallic plasmonic nanostructures with dense hot spots are considered an effective construction to enable sensitive, uniform, and stable SERS performance and thus have attracted wide attention in recent years. In this work, we reported a simple fabrication method to achieve wafer-scale ultradense tilted and staggered plasmonic metallic nanopillars filled with numerous nanogaps (hot spots). By adjusting the etching time of the PMMA (polymethyl methacrylate) layer, the optimal SERS substrate with the densest metallic nanopillars was obtained, which possessed a detection limit down to 10−13 M by using crystal violet as the detected molecules and exhibited excellent reproducibility and long-term stability. Furthermore, the proposed fabrication approach was further used to prepare flexible substrates; for example, a SERS flexible substrate was proven to be an ideal platform for analyzing low-concentration pesticide residues on curved fruit surfaces with significantly enhanced sensitivity. This type of SERS substrate possesses potential in real-life applications as low-cost and high-performance sensors.

Metasurfaces are ultrathin metamaterials consisting of subwavelength scatterers (e.g., meta-atoms) arranged in a specific sequence that generates low radiation losses and fantastic optical resonances. According to the electromagnetic response properties, metasurfaces can be divided into two categories: metallic nanostructures based on the response of plasmonic excitations (e.g., noble metals and graphene) and all-dielectric nanostructures based on near-field scattering (e.g., Mie scattering). Metasurfaces supporting various optical modes possess optical localization and electromagnetic field enhancement capabilities on the subwavelength scale, making them a promising platform for label-free detection in biomedical sensing. Metasurface-based optical sensors offer several outstanding advantages over conventional spectroscopic detection solutions, such as planar structures, low loss, miniaturization, and integration. Recently, novel sensing and even imaging tools based on metasurfaces have widely loomed and been proposed. Given recent advances in the field of metasurface spectroscopic detection, this review briefly summarizes the main resonance mechanisms of metasurfaces and the notable achievements, including refractive index sensing, surface-enhanced Raman scattering, surface-enhanced infrared absorption, and chiral sensing in the ultraviolet to terahertz wavelengths. Ultimately, we draw a summary of the current challenges of metasurface spectroscopic detection and look forward to future directions for improving these techniques. As the subject is broad and growing, our review will not be comprehensive. Nevertheless, we will endeavor to describe the main research in this area and assess some of the relevant literature.

There is an urgent need for novel processes that can integrate different functional nanostructures onto specific substrates, so as to meet the fast-growing need for broad applications in nanoelectronics, nanophotonics, and flexible optoelectronics. Existing direct-lithography methods are difficult to use on flexible, nonplanar, and biocompatible surfaces. Therefore, this fabrication is usually accomplished by nanotransfer printing. However, large-scale integration of multiscale nanostructures with unconventional substrates remains challenging because fabrication yields and quality are often limited by the resolution, uniformity, adhesivity, and integrity of the nanostructures formed by direct transfer. Here, we proposed a resist-based transfer strategy enabled by near-zero adhesion, which was achieved by molecular modification to attain a critical surface energy interval. This approach enabled the intact transfer of wafer-scale, ultrathin-resist nanofilms onto arbitrary substrates with mitigated cracking and wrinkling, thereby facilitating the in situ fabrication of nanostructures for functional devices. Applying this approach, fabrication of three-dimensional-stacked multilayer structures with enhanced functionalities, nanoplasmonic structures with ∼10 nm resolution, and MoS _2 -based devices with excellent performance was demonstrated on specific substrates. These results collectively demonstrated the high stability, reliability, and throughput of our strategy for optical and electronic device applications.

Those various cross-sectional vessels in trees transfer water to as high as 100 meters, but the traditional fabrication methods limit the manufacturing of those vessels, resulting in the non-availability of those bionic microchannels. Herein, we fabricate those bionic microchannels with various cross-sections by employing projection micro-stereolithography (P µ SL) based 3D printing technique. The circumradius of bionic microchannels (pentagonal, square, triangle, and five-pointed star) can be as small as 100 μ m with precisely fabricated sharp corners. What’s more, those bionic microchannels demonstrate marvelous microfluidic performance with strong precursor effects enabled by their sharp corners. Most significantly, those special properties of our bionic microchannels enable them outstanding step lifting performance to transport water to tens of millimeters, though the water can only be transported to at most 20 mm for a single bionic microchannel. The mimicked transpiration based on the step lifting of water from bionic microchannels is also achieved. Those precisely fabricated, low-cost, various cross-sectional bionic microchannels promise applications as microfluidic chips, long-distance unpowered water transportation, step lifting, mimicked transpiration, and so on.

Mid-infrared large field-of-view (FOV) imaging optics play a vital role in infrared imaging and detection. The metalens, which is composed of subwavelength-arrayed structures, provides a new possibility for the miniaturization of large FOV imaging systems. However, the inaccuracy during fabrication is the main obstacle to developing practical uses for metalenses. Here, we introduce the principle and method of designing a large FOV doublet metalens at the mid-infrared band. Then, the quantitative relationship between the fabrication error and the performance of the doublet metalens with a large FOV from four different fabrication errors is explored by using the finite-difference time-domain method. The simulation results show that the inclined sidewall error has the greatest impact on the focusing performance, and the interlayer alignment error deforms the focusing beam and affects the focusing performance, while the spacer thickness error has almost no impact on the performance. The contents discussed in this paper can help manufacturers determine the allowable processing error range of the large FOV doublet metalens and the priority level for optimizing the process, which is of significance.

Conductive hydrogels with high stretchability can extend their applications as a flexible electrode in electronics, biomedicine, human-machine interfaces, and sensors. However, their time-consuming fabrication and narrow ranges of working temperature and working voltage severely limit their further potential applications. Herein, a conductive nanocomposite network hydrogel fabricated by projection microstereolithography (PμSL) based 3D printing is proposed, enabling fast fabrication ability with high precision. The 3D printed hydrogels exhibit ultra-stretchability (2500%), hyper-antifreezing (-125°C), extremely low working voltage (

Summary: Glasses-free three-dimensional (3D) display is considered as a potential disruptive technology for display. The issue of visual fatigue, mainly caused by the inaccurate phase reconstruction in terms of image crosstalk, as well as vergence and accommodation conflict, is the critical obstacle that hinders the real applications of glasses-free 3D display. Here we propose a glasses-free 3D display by adopting metagratings for the pixelated phase modulation to form converged viewpoints. When the viewpoints are closely arranged, the holographic sampling 3D display can approximate a continuous light field. We demonstrate a video rate full-color 3D display prototype without visual fatigue under an LED white light illumination. The metagratings-based holographic sampling 3D display has a thin form factor and is compatible with traditional flat panel and thus has the potential to be used in portable electronics, window display, exhibition display, 3D TV, as well as tabletop display. : Optical Imaging; Optical Physics; Wave Optics; Metamaterials Subject Areas: Optical Imaging, Optical Physics, Wave Optics, Metamaterials

The metal–insulator–metal (MIM) waveguide, which can directly couple free space photons, acts as an important interface between conventional optics and subwavelength photoelectrons. The reason for the difficulty of this optical coupling is the mismatch between the large wave vector of the MIM plasmon mode and photons. With the increase in the wave vector, there is an increase in the field and Ohmic losses of the metal layer, and the strength of the MIM mode decreases accordingly. To solve those problems, this paper reports on inversely designed nanoantennas that can couple the free space and MIM waveguide and efficiently excite the MIM plasmon modes at multiple wavelengths and under oblique angles. This was achieved by implementing an inverse design procedure using a topology optimization approach. Simulation analysis shows that the coupling efficiency is enhanced 9.47-fold by the nanoantenna at the incident wavelength of 1338 nm. The topology optimization problem of the nanoantennas was analyzed by using a continuous adjoint method. The nanoantennas can be inversely designed with decreased dependence on the wavelength and oblique angle of the incident waves. A nanostructured interface on the subwavelength scale can be configured in order to control the refraction of a photonic wave, where the periodic unit of the interface is composed of two inversely designed nanoantennas that are decoupled and connected by an MIM waveguide.

Visible-light color filters using patterned nanostructures have attracted much interest due to their various advantages such as compactness, enhanced stability, and environmental friendliness compared with traditional pigment or dye-based optical filters. While most existing studies are based on planar nanostructures with lateral variation in size, shape, and arrangement, the vertical dimension of structures is a long-ignored degree of freedom for the structural colors. Herein, we demonstrate a synthetic platform for transmissive color filter array by coordinated manipulations between height-varying nanocavities and their lateral filling fractions. The thickness variation of those nanocavities has been fully deployed as an alternative degree of freedom, yielding vivid colors with wide gamut and excellent saturation. Experimental results show that the color-rendering capability of the pixelated nanocavities can be still retained as pixels are miniaturized to 500 nm. Crosstalk between closely spaced pixels of a Bayer color filter arrangement was calculated, showing minimal crosstalk for 1 µm2 square subpixels. Our work provides an approach to designing and fabricating ultracompact color filter arrays for various potential applications including stained-glass microprints, microspectrometers, and high-resolution image sensing systems.

Molybdenum disulfide (MoS2) has recently attracted considerable interests due to its unique properties and potential applications. Chemical vapor deposition (CVD) method is used widely to grow large-area and high-quality MoS2 single crystals. Here, we report our investigation on thermal strain-fractured (SF) single crystalline MoS2, oxidation-fractured MoS2, and normal MoS2 by atomic force microscopy (AFM), Raman and photoluminescence (PL) measurements. Several new Raman modes are observed for SF-MoS2. The band gap of SF-MoS2 is enlarged by 150 meV and the PL intensity is reduced substantially. These results imply that a structural transformation occurs in SF-MoS2. Our findings here are useful for the design of MoS2-based nanocatalysts with relative high catalytic activity.