Search

While the use of amorphous solid dispersions to improve aqueous solubility is well documented, little consideration has traditionally been given to the finished dosage form. The objective of this study was to evaluate the dissolution performance of amorphous solid dispersions containing a dispersed superdisintegrant with binding properties. KinetiSol® dispersing was used to thermally process hypromellose acetate succinate-based compositions containing the drug substance nifedipine (NIF) and a highly compressible grade of low-substituted hydroxypropyl cellulose (New Binder Disintegrants; NBD-grade). Solid-state analysis demonstrated that compositions were rendered amorphous during processing. Tablets containing intra-dispersion NBD were found to exhibit non-sink dissolution performance similar to milled intermediate, demonstrating excellent disintegration characteristics. Conversely, tablets without intra-dispersion NBD were found to release significantly less NIF during dissolution analysis due to particle agglomeration. It was determined that compressibility and particle wetting increased as the level of intra-dispersion NBD increased. [ABSTRACT FROM AUTHOR]

Acetyl-11-keto-β-boswellic acid (AKBA), a gum resin extract, possesses poor water-solubility that limits bioavailability and a high melting point making it difficult to successfully process into solid dispersions by fusion methods. The purpose of this study was to investigate solvent and thermal processing techniques for the preparation of amorphous solid dispersions (ASDs) exhibiting enhanced solubility, dissolution rates and bioavailability. Solid dispersions were successfully produced by rotary evaporation (RE) and KinetiSol® Dispersing (KSD). Solid state and chemical characterization revealed that ASD with good potency and purity were produced by both RE and KSD. Results of the RE studies demonstrated that AQOAT®-LF, AQOAT®-MF, Eudragit® L100-55 and Soluplus with the incorporation of dioctyl sulfosuccinate sodium provided substantial solubility enhancement. Non-sink dissolution analysis showed enhanced dissolution properties for KSD-processed solid dispersions in comparison to RE-processed solid dispersions. Variances in release performance were identified when different particle size fractions of KSD samples were analyzed. Selected RE samples varying in particle surface morphologies were placed under storage and exhibited crystalline growth following solid-state stability analysis at 12 months in comparison to stored KSD samples confirming amorphous instability for RE products. In vivo analysis of KSD-processed solid dispersions revealed significantly enhanced AKBA absorption in comparison to the neat, active substance. [ABSTRACT FROM AUTHOR]

The development of amorphous solid dispersions containing poorly soluble drug substances has been well-documented; however, little attention has been given to the development of the finished dosage form. The objective of this study was to investigate the use of Ceolus™ microcrystalline cellulose, a highly compressible excipient, for the production of rapidly disintegrating tablets containing a hydrophilic solid dispersion of a poorly soluble drug, indomethacin. Solid dispersions of indomethacin and Kollidon® VA64 were prepared by hot melt extrusion and characterized for amorphous nature. Milled dispersion particles at 500 mg/g drug loading were shown to be amorphous by differential scanning calorimetry and provided rapid dissolution in sink conditions. Physical characterization of the milled extrudate showed that the particle size of the intermediate was comparable with Ceolus™ PH-102 and larger than the high compressibility grades of microcrystalline cellulose selected for the trial (Ceolus™ KG-802, Ceolus™ UF-711). Preliminary tableting trials showed that dissolution performance was significantly reduced for formulations at dispersion loadings in excess of 50%. Using a mixture design of experiments (DOE), the levels of PH-102, KG-802, UF-711, and PH-301 were optimized. Trials revealed a synergistic relationship between conventional grades (PH-102 and PH-301) and highly compressible grades (KG-802 and UF-711) leading to improved compression characteristics and more rapid dissolution rates. The formulation and resulting compressibility were also shown to have an impact on in vitro supersaturation indicating tablet formulation could impact oral bioavailability. Through the use of highly compressible microcrystalline cellulose grades such as Ceolus™ KG-802 and UF-711, it may be possible to maximize the bioavailability benefit of amorphous solid dispersions administered as tablet dosage forms. [ABSTRACT FROM AUTHOR]

Abstract: Poorly water-soluble drug substances that exhibit high melting points are often difficult to successfully process by fusion-based techniques. The purpose of this study was to identify a suitable polymer system for meloxicam (MLX), a high melting point class II BCS compound, and investigate thermal processing techniques for the preparation of chemically stable single phase solid dispersions. Thermal and solution based screening techniques were utilized to screen hydrophilic polymers suitable for immediate release formulations. Results of the screening studies demonstrated that Soluplus®(SOL) provided the highest degree of miscibility and solubility enhancement. A hot-melt extrusion feasibility study demonstrated that high temperatures and extended residence times were required in order to render compositions amorphous, causing significant degradation of MLX. A design of experiments (DOE) was conducted on the KinetiSol® Dispersing (KSD) process to evaluate the effect of processing conditions on the chemical stability and amorphous character of MLX. The study demonstrated that ejection temperature significantly impacted MLX stability. All samples prepared by KSD were substantially amorphous. Dissolution analysis of the KSD processed solid dispersions showed increased dissolution rates and extent of supersaturation over the marketed generic MLX tablets. [Copyright &y& Elsevier]

The development of amorphous solid dispersions containing poorly soluble drug substances has been well-documented; however, little attention has been given to the development of the finished dosage form. The objective of this study was to investigate the use of Ceolus(™) microcrystalline cellulose, a highly compressible excipient, for the production of rapidly disintegrating tablets containing a hydrophilic solid dispersion of a poorly soluble drug, indomethacin. Solid dispersions of indomethacin and Kollidon(®) VA64 were prepared by hot melt extrusion and characterized for amorphous nature. Milled dispersion particles at 500 mg/g drug loading were shown to be amorphous by differential scanning calorimetry and provided rapid dissolution in sink conditions. Physical characterization of the milled extrudate showed that the particle size of the intermediate was comparable with Ceolus(™) PH-102 and larger than the high compressibility grades of microcrystalline cellulose selected for the trial (Ceolus(™) KG-802, Ceolus(™) UF-711). Preliminary tableting trials showed that dissolution performance was significantly reduced for formulations at dispersion loadings in excess of 50%. Using a mixture design of experiments (DOE), the levels of PH-102, KG-802, UF-711, and PH-301 were optimized. Trials revealed a synergistic relationship between conventional grades (PH-102 and PH-301) and highly compressible grades (KG-802 and UF-711) leading to improved compression characteristics and more rapid dissolution rates. The formulation and resulting compressibility were also shown to have an impact on in vitro supersaturation indicating tablet formulation could impact oral bioavailability. Through the use of highly compressible microcrystalline cellulose grades such as Ceolus(™) KG-802 and UF-711, it may be possible to maximize the bioavailability benefit of amorphous solid dispersions administered as tablet dosage forms.