Search

The aim of this study was to validate the G.LAB MD2680 digital automatic blood pressure (BP) monitor according to major international protocols.The device was evaluated against auscultatory sphygmomanometry according to the European Society of Hypertension International Protocol (ESH-IP) revision 2010, the British Hypertension Society (BHS), and the International Organization for Standardization (ISO) 81060-2:2013 protocols. Bland-Altman plots were completed for systolic (SBP) and diastolic blood pressures (DBP), and the mean differences and SDs between the test device and the reference device were computed for all BP values.The G.LAB MD2680 passed the ESH-IP revision 2010 on 33 participants with a mean device-observer difference of 0.89±4.97 mmHg for SBP and 0.72±4.91 mmHg for DBP, respectively. The device achieved A/A grading for the BHS protocol among 85 participants with a device-observer difference of 0.70±6.35 mmHg for SBP and 0.62±6.41 mmHg for DBP, respectively. Furthermore, it also fulfilled the two criteria of the ISO 81060-2:2013 protocol.The G.LAB MD2680 digital automatic BP monitor fulfilled the accuracy requirements of the ESH-IP revision 2010 and the ISO 81060-2:2013 protocols, and achieved A/A grade of the BHS protocol, and it can be recommended for self-measurement in adults.

The whispering gallery mode (WGM) microcavity has been widely used for sensing and detection because of its high quality factor, small mode size, simple and diverse manufacturing process, and high sensitivity to the surrounding environment. Microsphere cavityand microdisk cavity are typical whispering gallery mode microcavities. However, the real controllable size of the on-chip three-dimensional microsphere cavity has rarely been reported because it is difficult to prepare by photolithography. At the same time, most of the current microsphere cavity are prepared by hot melting, which have the poor ability to control the size. In this article, we have mainly demonstrated the fabrication of a dye-doped polymer whispering gallery mode microsphere by femtosecond laser two-photon polymerization, which shows good surface smoothness with a fabrication spatial resolution beyond the diffraction limit. The microsphere cavity consists with commercial photoresist SU-8 as the cavity material and Rhodamine B as the gain medium. With the 532 nm pump, the RhB-doped SU-8 can emit fluorescence in the spectral range of 600–700 nm, and thus resonant whispering gallery laser modes in this spectral region can be eventually formed in the microsphere cavities. The microcavity shows excellent lasing performance with a quality factor of ~2000. Due to the special luminescence mechanism of organic dyes, the fluorescence spectrum of the dye drifts with the change of ambient temperature, and it will form a new resonance excitation with the eigenmode of the cavity. Within a certain temperature range (20 ℃－35 ℃), the wavelength of the main lasing peak is linearly related to temperature. The results shows that the organic dye doped micro-resonator has a unique laser mechanism which can be used to construct a new type of microlaser. Moreover, the tunable microsphere laser can be used as a temperature sensor after further optimized. We believe our work will provide a positive inspiration for the rational design of miniaturized lasers with ideal performance.