Search

Energy transfer has been proven to be an effective method to optimize optoelectronic conversion efficiency by improving light absorption and mitigating nonradiative losses. We prepared 2D/3D CsPbBr3 hybrid assemblies at different reaction temperatures using the hot injection method and found that the photoluminescence quantum yields (PLQYs) of these hybrids were greatly enhanced from 53.4% to 72.57% compared with 3D nanocrystals (NCs). Femtosecond transient absorption measurements were used to study the PLQY enhancement mechanisms, and it was found that the hot carrier lifetime improved from 0.36 to 1.88 ps for 2D/3D CsPbBr3 hybrid assemblies owing to the energy transfer from 2D nanoplates to 3D NCs. The energy transfer benefits the excited carrier accumulation and prolonged hot carrier lifetime in 3D NCs in hybrid assemblies, as well as PLQY enhancement in materials. [ABSTRACT FROM AUTHOR]

Two-dimensional molybdenum disulfide (MoS2) has been proved to be a good candidate in photodetectors, and MoS2/graphene (MoS2/G) heterostructure has been widely used to expand the optical response wavelength of MoS2. To clarify the carrier transfer dynamics in the MoS2/G heterostructure, time-resolved transient absorption and two-color pump–probe measurements are performed. By comparing the carrier dynamics in MoS2 and MoS2/G under different pump wavelengths, we find that interfacial excitons are formed in the heterostructure, and fast hot carriers transfer (<200 fs) from graphene to MoS2 are observed. The results indicate that the formed heterostructure with graphene can not only expand the optical response wavelength of MoS2 but also improve the response time of the device in the near-infrared region. [ABSTRACT FROM AUTHOR]

Liquid metal (LM) is widely used in flexible electronic devices due to its excellent metallic conductivity and ductility. However, the fabrication of LM flexible strain sensors with high sensitivity and linearity is still a huge challenge, since the resistance of LM does not change much with strain. Here, a highly sensitive and linear fully flexible strain sensor with a resistive sensing function is proposed. The sensor comprises an Fe-doped liquid metal (Fe-LM) electrode for enhanced performance. The design and manufacturing of flexible strain sensors are based on the technology of controlling surface wettability by femtosecond laser micro/nano-processing. A supermetalphobic microstructure is constructed on a polydimethylsiloxane (PDMS) substrate to achieve the selection adhesion of Fe-LM on the PDMS substrate. The Fe-LM-based flexible strain sensor has high sensitivity and linearity, a gauge factor (GF) up to 1.18 in the strain range of 0–100%, excellent linearity with an R2 of 0.9978, a fast response time of 358 ms, and an excellent durability of more than 2400 load cycles. Additionally, the successful monitoring of human body signals demonstrates the potential of our developed flexible strain sensor in wearable monitoring applications. [ABSTRACT FROM AUTHOR]

Spectral–polarization imaging technology plays a crucial role in remote sensing detection, enhancing target identification and tracking capabilities by capturing both spectral and polarization information reflected from object surfaces. However, the acquisition of multi-dimensional data often leads to extensive datasets that necessitate comprehensive analysis, thereby impeding the convenience and efficiency of remote sensing detection. To address this challenge, we propose a fusion algorithm based on spectral–polarization characteristics, incorporating principal component analysis (PCA) and energy weighting. This algorithm effectively consolidates multi-dimensional features within the scene into a single image, enhancing object details and enriching edge features. The robustness and universality of our proposed algorithm are demonstrated through experimentally obtained datasets and verified with publicly available datasets. Additionally, to meet the requirements of remote sensing tracking, we meticulously designed a pseudo-color mapping scheme consistent with human vision. This scheme maps polarization degree to color saturation, polarization angle to hue, and the fused image to intensity, resulting in a visual display aligned with human visual perception. We also discuss the application of this technique in processing data generated by the Channel-modulated static birefringent Fourier transform imaging spectropolarimeter (CSBFTIS). Experimental results demonstrate a significant enhancement in the information entropy and average gradient of the fused image compared to the optimal image before fusion, achieving maximum increases of 88% and 94%, respectively. This provides a solid foundation for target recognition and tracking in airborne remote sensing detection. [ABSTRACT FROM AUTHOR]

Nonlinear optical limiting (OL) properties of carboxyl-functionalized Ti3C2 nanosheets (COOH-MXene) were studied using the nanosecond laser Z-scan technology. COOH-MXene showed excellent broadband OL properties with OL thresholds of 0.34 J/cm2 at 532 nm and 0.58 J/cm2 at 1064 nm, and the OL mechanism was mainly attributed to the reverse saturable absorption effect. Femtosecond time-resolved transient absorption measurements were used to clarify the ultrafast carrier dynamics in the OL process, and the results revealed that excited states absorption (ESA) in MXene was enhanced by introducing more carboxyl group terminations. When COOH-MXene was irradiated by laser pulses, excited electrons in the conduction band of MXene could transfer to the carboxyl groups and induce the ESA in the surface functional groups, resulting in the excellent OL property of COOH-MXene. [ABSTRACT FROM AUTHOR]