Search

Polymerase chain reaction (PCR) is one of the most important techniques in molecular pathology by which the single or the pieces of target DNA are amplified by using a pair of DNA primer, heat-resistant DNA polymerase enzyme and nucleotides. This chapter discusses the principle, steps and application of PCR in pathology. There are four basic steps of PCR: denaturation, annealing and extension. The PCR thermal cycle rapidly heats and cools the PCR reagent mixture. The cycling time depends on (1) size of the DNA template and (2) G-C content of DNA. The number of the thermal cycler is usually set as 25–30 cycles. The PCR products are demonstrated by agarose gel electrophoresis of the product, cloning or sequencing of the products. The chapter also covers the troubleshooting of PCR. There are different types of PCR methods for diagnostic purposes that include reverse transcriptase PCR, asymmetric PCR, hot start PCR, in situ PCR, inverse PCR, single-strand conformation polymorphism, real-time PCR and nested PCR. All these types of PCR have been described in details.

A new approach for improved RT-PCR is described. It is based on primers designed to form controlled stem–loop and homodimer configurations, hence the name ‘double-bubble’ primers. The primers contain three main regions for efficient RT-PCR: a 3′ short overhang to allow reverse transcription, a stem region for hot start and a template-specific region for PCR amplification. As proof of principle, GAPDH, SARS-CoV-2 synthetic RNA and SARS-CoV-2 virus-positive nasopharyngeal swabs were used as templates. Additionally, these primers were used to positively confirm the N501Y mutation from nasopharyngeal swabs. Evidence is presented that the double-bubble primers offer fast, specific, robust and cost-effective improvement in RT-PCR amplification for detection of gene expression in general and for diagnostic detection and genotyping of SARS-CoV-2 in particular., METHOD SUMMARY A new approach for improved RT-PCR is described. It is based on primers designed to form controlled stem–loop and homodimer configurations hence the name ‘double-bubble’ primers. It is fast, specific, robust and cost-effective. The method is applied to detect wild-type and mutated SARS-CoV-2 virus.

The Hot Start polymerase chain reaction (Hot Start PCR) is designed to reduce off-target amplification by blocking DNA polymerase extension at room temperature until the desired temperature is reached. In this study, we investigated a new method of Hot Start PCR that uses a modified Escherichia coli Exonuclease III (EcoExoIIIM) by substituting residues in the DNA-binding pocket and catalytic center. The results showed that PCR amplification yield and specificity were significantly promoted by the addition of EcoExoIIIM. We hypothesize that non-specific binding of primers at room temperature is prevented by binding of the primed template by EcoExoIIIM, which is then released from the DNA by heat denaturation before the first PCR cycle. Through this mechanism, PCR would be enhanced by reducing off-target extension at room temperature.

Background: As a heat-resistant polymerase, Thermus thermophilus (Tth) DNA polymerase can be widely used in Polymerase Chain Reaction (PCR). However, its non-specific amplification phenomenon is serious, which greatly limits development. Objective: In this study, we prepared Tth monoclonal antibodies against Tth DNA polymerase and researched their application in hot-start PCR. Methods: Tth was recombinantly expressed and purified, and used as an antigen to immunize BALB/ c mice to obtain monoclonal antibodies. The qualified monoclonal antibody and Tth were incubated for a period of time at a certain temperature to obtain the hot-start Tth. We tested the polymerase activity and exonuclease activity blocking the performance of hot-start Tth. Finally, the hot-start Tth was applied to one-step RT-PCR. Results: Tth with a purity of >95% was obtained, and ten monoclonal antibodies were obtained by immunization. After incubation, three monoclonal antibodies were identified that could inhibit the polymerase activity of Tth at low temperature. Furthermore, these three antibodies successfully eliminated non-specific amplification in practical applications. Conclusion: Three monoclonal antibodies were successfully validated. Among them, monoclonal antibody 9 had the best overall effect. They possess the function of inhibiting at low temperature and releasing at high temperature, which can be used as Tth polymerase inhibitors in the field of molecular diagnostics.

DNA analysis of biological specimens containing degraded nucleic acids such as mortal remains, archaeological artefacts, forensic samples etc. has gained more attention in recent years. DNA extracted from these samples is often inapplicable for conventional polymerase chain reaction (PCR), so for its amplification the nearby primers are commonly used. Here we report the data that clarify the features of PCR with nearby and abutting primers. We have shown that the proximity of primers leads to significant reduction of the reaction time and ensures the successful performance of DNA amplification even in the presence of PCR inhibitors. The PCR with abutting primers is usually characterized by the absence of nonspecific amplification products that causes extreme sensitivity with limit of detection on single copy level. The feasibility of PCR with abutting primers was demonstrated on species identification of 100 years old rotten wood.

PCR is used to generate large amounts of nucleic acid from small amounts or target, using either conventional or real-time technology. Essential reagents are a thermostable DNA-dependant DNA polymerase, synthetic oligonucleotide primers, dNTPs and a balanced buffer system. The target can be isolated from various different source materials, and the PCR reaction is automated. The (c)DNA sample must reach a certain degree of purity or needs to be free of components that influence the polymerisation reaction. PCR is extremely sensitive and, when the parameters are correct, extremely specific. This allows a wide variety of applications in various clinical fields. A PCR consists of a number of repetitive cycles of alternating denaturation, annealing and extension. The hereby synthesised products (amplimers) can be characterised with a wide variety of techniques.

Polymerase chain reaction (PCR), a versatile DNA amplification method, is a fundamental technology in modern life sciences and molecular diagnostics. After multiple rounds of PCR, however, nonspecific DNA fragments are often produced and the amplification efficiency and fidelity decrease. Here, we demonstrated that poly(ethylene glycol)-engrafted nanosized graphene oxide (PEG-nGO) can significantly improve the PCR specificity and efficiency. PEG-nGO allows the specificity to be maintained even after multiple rounds of PCR, allowing reliable amplification at low annealing temperatures. PEG-nGO decreases the nonspecific annealing of single-stranded DNA (ssDNA), such as primer dimerization and false priming, by adsorbing excess primers. Moreover, PEG-nGO interrupts the reannealing of denatured template DNA by preferentially binding to ssDNA. Thus, PEG-nGO enhances the PCR specificity by preferentially binding to ssDNA without inhibiting DNA polymerase, which is analogous to the role of ssDNA binding proteins.

Polymerase chain reaction (PCR) technique is widely used in many experimental conditions, and Taq DNA polymerase is critical in PCR process. In this article, the Taq DNA polymerase expression plasmid is reconstructed and the protein product is obtained by rapid purification, (“Rapid purification of high-activity Taq DNA polymerase” (Pluthero, 1993 [1]), “Single-step purification of a thermostable DNA polymerase expressed in Escherichia coli” (Desai and Pfaffle, 1995 [2])). Here we present the production data from protein expression and provide the analysis results of the production from two different vectors. Meanwhile, the purification data is also provided to show the purity of the protein product.

A polymerase chain reaction (PCR) using a thermostable DNA polymerase is the most widely applied method in many areas of research, including life sciences, biotechnology, and medical sciences. However, a conventional PCR incurs an amplification of undesired genes mainly owing to non-specifically annealed primers and the formation of a primer-dimer complex. Herein, we present the development of a Taq DNA polymerase-specific repebody, which is a small-sized protein binder composed of leucine rich repeat (LRR) modules, as a thermolabile inhibitor for a precise and accurate gene amplification by PCR. We selected a repebody that specifically binds to the DNA polymerase through a phage display, and increased its affinity to up to 10 nM through a modular evolution approach. The repebody was shown to effectively inhibit DNA polymerase activity at low temperature and undergo thermal denaturation at high temperature, leading to a rapid and full recovery of the polymerase activity, during the initial denaturation step of the PCR. The performance and utility of the repebody was demonstrated through an accurate and efficient amplification of a target gene without nonspecific gene products in both conventional and real-time PCRs. The repebody is expected to be effectively utilized as a thermolabile inhibitor in a PCR. Biotechnol. Bioeng. 2016;113: 2544-2552. © 2016 Wiley Periodicals, Inc.

On-site quantitative analyses of microorganisms (including viruses) by the polymerase chain reaction (PCR) system are significantly influencing medical and biological research. We have developed a remarkably rapid and portable real-time PCR system that is based on microfluidic approaches. Real-time PCR using TaqMan probes consists of a complex reaction. Therefore, in a rapid real-time PCR, the optimum DNA polymerase must be estimated by using actual real-time PCR conditions. In this study, we compared the performance of three DNA polymerases in actual PCR conditions using our rapid real-time PCR system. Although KAPA2G Fast HS DNA Polymerase has the highest enzymatic activity among them, SpeedSTAR HS DNA Polymerase exhibited better performance to rapidly increase the fluorescence signal in an actual real-time PCR using TaqMan probes. Furthermore, we achieved rapid detection of Escherichia coli in 7 min by using SpeedSTAR HS DNA Polymerase with the same sensitivity as that of a conventional thermal cycler.

A multiplex PCR assay consisting of 13 Rapidly Mutating Y STR loci called RM-Yplex was previously developed. Platinum® Taq DNA polymerase was used to amplify the 13 Y STR loci in a single reaction at an amplification time of approximately 2.5 h. In order to shorten the process with reliable results, two DNA polymerases were tested with the multiplex. Phusion® Flash High Fidelity, TAKARA Z-taqTM , and Platinum® Taq DNA polymerases were investigated for conducting RM-Yplex assay at various PCR cycling conditions. Rapid, robust, and efficient amplification of all the markers within the multiplex were achieved. The amplification time was reduced from 2.5 h to less than 28 min with Phusion® Flash High Fidelity DNA polymerase using Veriti® PCR thermal cycler.

We previously reported that Neq A523R DNA polymerase is more efficient in PCR than wild-type Neq DNA polymerase, and amplifies products more rapidly. Neq A523R DNA polymerase also amplifies templates more rapidly than Pfu DNA polymerase, but has a lower fidelity than Pfu DNA polymerase. To improve product yield and the fidelity of amplification simultaneously, we constructed and characterized the double mutant Neq A523R/N540R. The yield of PCR products was greater for Neq A523R/N540R DNA polymerase than wild-type and other mutant DNA polymerases, and the Neq double mutant catalyzed amplification of a 12-kb PCR product from a lambda template with an extension time of 3 min. The PCR error rate of Neq A523R/N540R DNA polymerase (6.3×10(-5)) was roughly similar to that of Pfu DNA polymerase (4.8×10(-5)), but much lower than those of wild-type Neq DNA polymerase (57.2×10(-5)), Neq A523R DNA polymerase (13.1×10(-5)), and Neq N540R DNA polymerase (37.7×10(-5)). These results indicated that A523R and N540R mutations of Neq DNA polymerase had synergistic effects on its fidelity.

The large fragment of DNA polymerase I fromGeobacillus stearothermophilusGIM1.543 (Bst DNA polymerase) with 5′-3′ DNA polymerase activity while in absence of 5′-3′ exonuclease activity possesses high thermal stability and polymerase activity. Bst DNA polymerase was employed in isothermal multiple self-matching initiated amplification (IMSA) which amplified the interest sequence with high selectivity and was widely applied in the rapid detection of human epidemic diseases. However, the detailed information of commercial Bst DNA polymerase is unpublished and well protected by patents, which makes the high price of commercial kits. In this study, wild-type Bst DNA polymerase (WT) and substitution mutations for improving the efficiency of DNA polymerization were expressed and purified inE. coli. Site-directed substitutions of four conserved residues (Gly310, Arg412, Lys416, and Asp540) in the activity site of Bst DNA polymerase influenced efficiency of polymerizing dNTPs. The substitution of residue Gly310by alanine or leucine and residue Asp540by glutamic acid increased the efficiency of polymerase activity. All mutants with higher polymerizing efficiency were employed to complete the rapid detection of EV71-associated hand, foot, and mouth disease (HFMD) by IMSA approach with relatively shorter period which is suitable for the primary diagnostics setting in rural and underdeveloped areas.

Conventional PCR (cPCR) with 38 thermal cycles (cPCR38cycles) failed to amplify 3 copies of Escherichia coli O157:H7 DNA at the presence of 3.28×106 copies of Salmonella Typhimurium DNA, but emulsion PCR (ePCR) with 20 thermal cycles and a subsequent conventional PCR with 38 thermal cycles (ePCR20cycles-sPCR38cycles) amplified them. Partitioning individual E. coli O157:H7 DNA with emulsion droplet improved the specificity of PCR and let 3 copies of E. coli O157:H7 DNA to be amplified specifically at the presence of 3.28×106 copies of S. Typhimurium DNA. Application of ePCR improved the sensitivity of PCR-based pathogen detection and enabled the detection of 3 copies of E. coli O157:H7 DNA.

Taq DNA polymerase is a thermostable DNA polymerase with high specificity and efficiency for DNA amplification and it is widely used in PCR. In this pap/er, we explored a method of isolation and purification of Taq DNA polymerase from a strain of our lab. By optimizing the procedures of induction, isolation and purification, we produced Taq DNA polymerase with high yield and amplification efficiency. We also characterized its thermostability and amplification efficiency. Compared to that of commercial enzyme, the Taq DNA polymerase we isolated has similar quality or even better specificity.

Body fluid DNA sequencing is a powerful noninvasive approach for the diagnosis of genetic defects, infectious agents and diseases. The success relies on the quantity and quality of the DNA samples. However, numerous clinical samples are either at low quantity or of poor quality due to various reasons. To overcome these problems, we have developed T oligo-primed polymerase chain reaction (TOP-PCR) for full-length nonselective amplification of minute quantity of DNA fragments. TOP-PCR adopts homogeneous “half adaptor” (HA), generated by annealing P oligo (carrying a phosphate group at the 5′ end) and T oligo (carrying a T-tail at the 3′ end), for efficient ligation to target DNA and subsequent PCR amplification primed by the T oligo alone. Using DNA samples from body fluids, we demonstrate that TOP-PCR recovers minute DNA fragments and maintains the DNA size profile, while enhancing the major molecular populations. Our results also showed that TOP-PCR is a superior method for detecting apoptosis and outperforms the method adopted by Illumina for DNA amplification.

Background Microcin E492 is a low molecular weight channel-forming microbial toxin that is produced by some Klebsiella pneumoniae strains. This peptide is active in some strains of Enterobacteriaceae family, and it has different applications in medicine. Objectives The present descriptive analytical study was carried out to determine the presence of Klebsiella pneumoniae with gene encoding Microcin E492 in clinical specimens isolated from patients registered in two hospitals in Isfahan, Iran. Methods In this interventional-descriptive study, 45 clinical specimens including 20 urine clinical specimens, 10 respiratory tract clinical specimens and 15 burn wounds specimens were selected from Al-Zahra and Imam Musa Kazem hospitals in Isfahan during the year 2013. Total DNA was extracted from clinical specimens and hot start PCR was optimized using specific primers for the amplification of the complete sequence of E492 gene. Fidelity of PCR products was confirmed by direct sequencing. Homology analysis was performed by application of BLAST serve. The data were analyzed with Chromasv2.1.1 software. Results In forty-five collected clinical specimens (20 urine clinical specimens, 10 respiratory tractclinical specimens and 15 burn wounds specimens), 20 samples (44.4%) were screened with Klebsiella pneumoniae contamination. PCR analysis was showed presence of E492 gene in 40% (8 samples) of contaminated clinical specimens. Conclusions About 40% of the clinical specimens collected from Isfahan hospitals contaminated with Klebsiella pneumoniae had microcin E492 gene. These types of microcins are low molecular weight antibiotic peptides produced by Enterobacteriaceae with a wide range of antibacterial activity against Gram-negative bacteria. This property can be useful for antibacterial trials. Existence of microcin gene in Enterobacteriaceae can develop them into a dominant microbial flora in human body internal environment.

Polymerase chain reaction (PCR) is an oft-used preparatory technique in amplifying specific DNA regions for downstream analysis. The size of an amplicon was initially limited by errors in nucleotide polymerization and template deterioration during thermal cycling. A variant of PCR, designated long-range PCR, was devised to counter these drawbacks and enable the amplification of large fragments exceeding a few kb. In this chapter we describe a protocol for long-range PCR, which we have adopted to obtain products of 6.6, 7.2, 13, and 20 kb from human genomic DNA samples.

Among dozens of DNA polymerases cloned from thermophilic bacteria, Taq DNA polymerase from Thermus aquaticus has been most frequently used in polymerase chain reaction (PCR) that is being applied to gene cloning, DNA sequencing, gene expression analysis, and detection of infectious and genetic diseases. Since native Taq DNA polymerase is expressed at low level in T. aquaticus, recombinant Escherichia coli system was used to produce Taq DNA polymerase in a large amount. Taq DNA polymerase was expressed as a soluble form under the control of tac promoter in E. coli, and purified by heat treatment and ion exchange chromatographies. The purified Taq DNA polymerase was nearly homogeneous and exhibited a similar DNA amplification activity with a commercial Taq DNA polymerase.

As larger-scale cloning projects become more prevalent, there is an increasing need for comparisons among high fidelity DNA polymerases used for PCR amplification. All polymerases marketed for PCR applications are tested for fidelity properties (i.e., error rate determination) by vendors, and numerous literature reports have addressed PCR enzyme fidelity. Nonetheless, it is often difficult to make direct comparisons among different enzymes due to numerous methodological and analytical differences from study to study. We have measured the error rates for 6 DNA polymerases commonly used in PCR applications, including 3 polymerases typically used for cloning applications requiring high fidelity. Error rate measurement values reported here were obtained by direct sequencing of cloned PCR products. The strategy employed here allows interrogation of error rate across a very large DNA sequence space, since 94 unique DNA targets were used as templates for PCR cloning. The six enzymes included in the study, Taq polymerase, AccuPrime-Taq High Fidelity, KOD Hot Start, cloned Pfu polymerase, Phusion Hot Start, and Pwo polymerase, we find the lowest error rates with Pfu, Phusion, and Pwo polymerases. Error rates are comparable for these 3 enzymes and are >10x lower than the error rate observed with Taq polymerase. Mutation spectra are reported, with the 3 high fidelity enzymes displaying broadly similar types of mutations. For these enzymes, transition mutations predominate, with little bias observed for type of transition.

Quantum dots (QDs) are of great interest due to their unique chemical and physical properties. Recently, a hot start (HS) polymerase chain reaction (PCR) amplification performance based on QDs with a high-fidelity Pfu DNA polymerase has been reported. However, whether QDs can trigger HS effects with other high-fidelity or conventional DNA polymerases is yet to be understood. In the present study, we studied the QD-triggered HS effects with four high-fidelity and three conventional DNA polymerases, and the HS effect comparisons among them were also made. It was found that QDs could trigger a distinct HS PCR amplification performance with all the four tested high-fidelity DNA polymerases, and specific target DNA could be well amplified even if the PCR mixture was pre-incubated for 2 h at 50°C. On the contrary, the HS effects were not prominent with all the three conventional Taq DNA polymerases. Specifically, the fidelity of Pfu is not sacrificed in the presence of QDs, even after a 1 h pre-incubation at 50°C before PCR. Furthermore, the electrophoresis results preliminarily demonstrated that QDs prefer to adsorb high-fidelity polymerases rather than conventional ones, which might result in the QD-triggered HS effects on PCR performance by using high-fidelity DNA polymerases.

RNA/DNA primer pairs and two polymerases were used to efficiently amplify DNA sequences using the conventional polymerase chain reaction (PCR). The reaction required the use of both DNA polymerase and reverse transcriptase during each thermal cycle and formed a double-stranded DNA in which one terminus was an RNA/DNA hybrid. Because there is a higher sensitivity of the DNA polymerase to the mismatch at the 3′-end in the RNA/DNA hybrid duplex than in the DNA/DNA duplex, the RNA-primed PCR reveals much better specificity in the allele-specific PCR to detect single-nucleotide mutation.

Aim To generate complete DNA profiles from blood and saliva samples deposited on FTA® and non-FTA® paper substrates following a direct amplification protocol. Methods Saliva samples from living donors and blood samples from deceased individuals were deposited on ten different FTA® and non-FTA® substrates. These ten paper substrates containing body fluids were kept at room temperature for varying lengths of time ranging from one day to approximately one year. For all assays in this research, 1.2 mm punches were collected from each substrate containing one type of body fluid and amplified with reagents provided in the nine commercial polymerase chain reaction (PCR) amplification kits. The substrates were not subjected to purification reagent or extraction buffer prior to amplification. Results Success rates were calculated for all nine amplification kits and all ten substrates based on their ability to yield complete DNA profiles following a direct amplification protocol. Six out of the nine amplification kits, and four out of the ten paper substrates had the highest success rates overall. Conclusion The data show that it is possible to generate complete DNA profiles following a direct amplification protocol using both standard (non-direct) and direct PCR amplification kits. The generation of complete DNA profiles appears to depend more on the success of the amplification kit rather than the than the FTA®- or non-FTA®-based substrates.

Mechanisms that allow replicative DNA polymerases to attain high processivity are often specific to a given polymerase and cannot be generalised to others. Amplification efficiency is lower in family B-type DNA polymerases than in family A-type (Taq) polymerases because of their strong 3'-5' exonuclease-activity. Here, we have red the exonuclease domain of the Thermococcus onnurineus NA1 (TNA1) DNA polymerase, especially Asn210 to Asp215 residues in Exo II motif (NXXXFD), to improve the processivity. N213D mutant protein had higher processivity and extension rate than the wild-type TNA1 DNA polymerase, retaining a lower mutation frequency than recombinant Taq DNA polymerase. Consequently, the N213D mutant could amplify target DNA up to 13.5 kb in length from human genomic DNA and 16.2 kb in length from human mitochondrial DNA while wild-type TNA1 amplified target DNA of 2.7 kb in length from human genomic DNA.

Background: Taq DNA polymerase is a very important enzyme for molecular biological studies such as DNA amplification and DNA sequencing by the PCR. It is a standard enzyme that is used in 90% of molecular biology labs today. The aim of this study was to produce Taq DNA polymerase enzyme in E. coli by a reliable, practical, simple and low cost method.Materials and Methods: In this study, the Taq gene was amplified from the genomic DNA of Thermus aquaticus and cloned into pTrc99A vector. Recombinant plasmid is expressed in E. coli strain TOP10. Product protein is extracted and purified. Expression of gene was analyzed by SDS-PAGE and gene amplification.Results: SDS-PAGE showed an approximately 94 KDa protein. The density of protein bands in agarose gel electrophoresis indicated that the purified enzyme is more active than the non purified one.Conclusion: The protocols described in this paper lead to the production of pure and active enzyme that can be applied in both teaching and research laboratories.

As previously reported, a novel low temperature (LoTemp) polymerase chain reaction (PCR) catalyzed by a moderately heat-resistant (MHR) DNA polymerase with a chemical-assisted denaturation temperature set at 85 °C instead of the conventional 94–96 °C can achieve high-fidelity DNA amplification of a target DNA, even after up to 120 PCR thermal cycles. Furthermore, such accurate amplification is not achievable with conventional PCR. Now, using a well-recognized L1 gene segment of the human papillomavirus (HPV) type 52 (HPV-52) as the template for experiments, we demonstrate that the LoTemp high-fidelity DNA amplification is attributed to an unusually high processivity and stability of the MHR DNA polymerase whose high fidelity in template-directed DNA synthesis is independent of non-existent 3'–5' exonuclease activity. Further studies and understanding of the characteristics of the LoTemp PCR technology may facilitate implementation of DNA sequencing-based diagnostics at the point of care in community hospital laboratories.

We previously reported that Tpa -S DNA polymerase (constructed via fusion of the Sso7d DNA binding protein to the C-terminus of Thermococcus pacificus ( Tpa ) DNA polymerase) is more efficient in long and rapid PCR than wild-type Tpa , Taq , or Pfu DNA polymerases. However, Tpa -S DNA polymerase had a low yield of PCR products compared with commercialized Taq or Pfu DNA polymerases. To improve the yield of PCR products, mutant Tpa -S DNA polymerases were created via site-directed mutagenesis. In this study, we have targeted the N213 residue in the Exo II motif and the K501 residue in the Pol III motif. The mutant Tpa -S DNA polymerases showed enhanced PCR yields compared to that of the Tpa -S DNA polymerase. Specifically, the double mutant Tpa -S N213D/K501R DNA polymerase had an approximately three-fold increase in the yield of 8–10 kb PCR products over that of the Tpa -S DNA polymerase, and catalyzed amplification of a 12 kb PCR product using a lambda template with an extension time of 30 s. Even though the mutation is in the Exo II motif, the error rate of the double mutant Tpa -S N213D/K501R (2.79 × 10 −5 ) was nearly the same as that seen in the Pfu DNA polymerase (2.70 × 10 −5 ).

Hot-start (HS) effects were investigated in pfu-based polymerase chain reaction (PCR), when water-soluble CdTe quantum dots (QDs) were introduced in the PCR system. The HS effects were demonstrated by the higher amplicon yields and excellent suppression of non-specific amplification after pre-incubation of PCR mix with QDs between 35°C and 56°C. DNA targets were well amplified even after PCR mixture was pre-incubated 1 h at 50°C. Importantly, the effects of QDs nanoparticles could be reversed by increasing the pfu polymerase concentration, suggesting that there was an interaction between QDs and pfu DNA polymerase. Moreover, control experiment indicated that HS effect is not primarily due to the reduced pfu polymerase concentration resulted from the above interaction. Fluorescence correlation spectroscopy (FCS), a single molecule detection method, was used to investigate the possible mechanism of HS PCR with QDs. Preliminary FCS results suggested that CdTe QDs may directly interact with pfu DNA polymerase...

Methylation-specific polymerase chain reaction (MS-PCR) is a more rapid way to detect changes in DNA methylation than is bisulfite sequencing. In addition, by incorporating some basic automation, samples can be prepared and analyzed in a 96-well plate format. The method can be used either quantitatively (qRT-PCR-based MethyLight) or qualitatively (using agarose gels) to detect changes in DNA methylation; both are described in this protocol.

DNA polymerases with proofreading activity are important for accurate amplification of target DNA. Despite numerous efforts have been made to improve the proofreading DNA polymerases, they are more susceptible to be failed in PCR than non-proofreading DNA polymerases. Here we showed that proofreading DNA polymerases can be inhibited by certain primers. Further analysis showed that G-rich sequences such as GGGGG and GGGGHGG can cause PCR failure using proofreading DNA polymerases but not Taq DNA polymerase. The inhibitory effect of these G-rich sequences is caused by G-quadruplex and is dose dependent. G-rich inhibitory sequence-containing primers can be used in PCR at a lower concentration to amplify its target DNA fragment.

Polymerase chain reaction coupled with signal generation offers sensitive recognition of target DNA sequence; however, these procedures require fluorophore-labeled oligonucleotide probes and high-tech equipment to achieve high specificity. Therefore, intensive research has been conducted to develop reliable, convenient, and economical DNA detection methods. The relay PCR described here is the first sequence-specific detection method using a small-molecule fluorophore as a sensor and combines the classic 5'-3' exonuclease activity of Taq polymerase with an RNA mimic of GFP to build a label-free DNA detection platform. Primarily, Taq polymerase cleaves the 5' noncomplementary overhang of the target specific probe during extension of the leading primer to release a relay oligo to initiate tandem PCR of the reporting template, which encodes the sequence of RNA aptamer. Afterward, the PCR product is transcribed to mRNA, which could generate a fluorescent signal in the presence of corresponding fluorophore. In addition to high sensitivity and specificity, the flexibility of choosing different fluorescent reporting signals makes this method versatile in either single or multiple target detection.

Co-amplification at lower denaturation temperature-based polymerase chain reaction (COLD-PCR) is a single-step amplification method that results in the enhancement of both known and unknown minority alleles during PCR, irrespective of mutation type and position. This method is based on exploitation of the critical temperature, Tc, at which mutation-containing DNA is preferentially melted over wild type. COLD-PCR can be a good strategy for mutation detection in specimens with high nonneoplastic cell content, small specimens in which neoplastic cells are difficult to micro-dissect and therefore enrich, and whenever a mutation is suspected to be present but is undetectable using conventional PCR and sequencing methods. We describe in this chapter our COLD-PCR-based pyrosequencing method for KRAS mutation detection in various clinical samples using DNA extracted from either fresh or fixed paraffin-embedded tissue specimens.

Many applications in molecular biology can benefit from improved PCR amplification of DNA segments containing a wide range of GC content. Conventional PCR amplification of DNA sequences with regions of GC less than 30%, or higher than 70%, is complex due to secondary structures that block the DNA polymerase as well as mispriming and mis-annealing of the DNA. This complexity will often generate incomplete or nonspecific products that hamper downstream applications. In this study, we address multiplexed PCR amplification of DNA segments containing a wide range of GC content. In order to mitigate amplification complications due to high or low GC regions, we tested a combination of different PCR cycling conditions and chemical additives. To assess the fate of specific oligonucleotide (oligo) species with varying GC content in a multiplexed PCR, we developed a novel method of sequence analysis. Here we show that subcycling during the amplification process significantly improved amplification of short template pools (~200 bp), particularly when the template contained a low percent of GC. Furthermore, the combination of subcycling and 7-deaza-dGTP achieved efficient amplification of short templates ranging from 10-90% GC composition. Moreover, we found that 7-deaza-dGTP improved the amplification of longer products (~1000 bp). These methods provide an updated approach for PCR amplification of DNA segments containing a broad range of GC content.

Sensitive identification of the etiology of viral diseases is key to implementing appropriate prevention and treatment. The gold standard for virus identification is the polymerase chain reaction (PCR), a technique that allows for highly specific and sensitive detection of pathogens by exponentially amplifying a specific region of DNA from as little as a single copy through thermocycling a biochemical cocktail. Today, molecular biology laboratories use commercial instruments that operate in 0.5-2 h/analysis using reaction volumes of 5-50 μL contained within polymer tubes or chambers. Towards reducing this volume and maintaining performance, we present a semi-quantitative, systematic experimental study of how PCR yield is affected by tube/chamber substrate, surface-area-to-volume ratio (SA:V), and passivation methods. We perform PCR experiments using traditional PCR tubes as well as using disposable polymer microchips with 1 μL reaction volumes thermocycled using water baths. We report the first oil encapsulation microfluidic PCR method without fluid flow and its application to the first microfluidic amplification of Epstein Barr virus using consensus degenerate primers, a powerful and broad PCR method to screen for both known and novel members of a viral family. The limit of detection is measured as 140 starting copies of DNA from a starting concentration of 3 × 10(5) copies/mL, regarded as an accepted sensitivity threshold for diagnostic purposes, and reaction specificity was improved as compared to conventional methods. Also notable, these experiments were conducted with conventional reagent concentrations, rather than commonly spiked enzyme and/or template mixtures. This experimental study of the effects of substrate, SA:V, and passivation, together with sensitive and specific microfluidic PCR with consensus degenerate primers represent advances towards lower cost and higher throughput pathogen screening.

Decent hot-start effects were here reported in Taq DNA polymerase-based polymerase chain reaction (PCR) when water-soluble CdTe quantum dots (QDs) were employed. The hot-start effects were revealed by the higher amplicon yields and distinguished suppression of nonspecific amplification after pre-incubation of PCR mix with quantum dots between 30°C and 56°C. DNA targets were well amplified even after PCR mixture was pre-incubated 3 hr at 30°C or 1 hr at 50°C. Importantly, the effects of QDs nanoparticles could be reversed by increasing the polymerase concentration, suggesting that there was an interaction between QDs and Taq DNA polymerase. Moreover, control experiment indicated that hot-start effect is not primarily due to the reduced polymerase concentration resulted from the above interaction. This study provided another good start to investigate potential implications of quantum dots in key molecular biology techniques.

The Thermococcus celericrescens (Tcel) DNA polymerase gene, which contains a 2328-bp open reading frame that encodes 775 amino acid residues, was expressed in the Escherichia coli strain Rosetta(DE3)pLysS. The expressed enzyme was purified through heat treatment, HisTrap™ HP column chromatography and then HiTrap™ SP HP column chromatography. Tcel DNA polymerase has poor thermostability and PCR efficiency compared to those of other family B DNA polymerases. To improve thermostability and PCR efficiency, mutant Tcel DNA polymerases were created via site-directed mutagenesis. Specifically, we targeted the A752 residue for enhanced thermostability and the N213 residue for improved PCR efficiency. The mutant Tcel DNA polymerases all showed enhanced PCR efficiency and thermostability compared to those of the wild-type Tcel DNA polymerase. Specifically, the double mutant TcelA752K/N213D DNA polymerase had an approximately three-fold increase in thermostability over that of the wild-type enzyme and amplified a long 10-kb PCR product in an extension time of 2 min. However, there was a small change in the 3′ → 5′ exonuclease activity compared with that of the wild-type Tcel DNA polymerase, even though the mutation is in the ExoII motif. The double mutant TcelA752K/N213D DNA polymerase had a 2.6-fold lower error rate compared to that of Taq DNA polymerase. It seems that the double mutant TcelA752K/N213D DNA polymerase can be used in LA (long and accurate) PCR.

Polymerase chain reaction (PCR), an essential tool in many fields such as molecular biology, normally comprises three steps: denaturation at a high temperature, annealing at a low temperature and elongation at a moderate temperature. Here, we report a two-step PCR method which incorporates annealing and elongation step for significant time-saving and reduction in reagent use. To investigate whether the two-step method is as useful as the common three-step method, different lengths of DNA fragments were amplified by two-step PCR and three-step PCR and the influence of incorporated temperature and the amount of Taq polymerases were performed in the present study. The results showed that, all the DNA fragments of 300 to 1000 bp could be amplified by two-step PCR method and the temperature from 50 to 60.8°C could provide a viable range for annealing/extension steps and the fidelity of the PCR has not been affected by the two step method presented. Taken together, the two-step PCR could be used to amplify DNA fragment, which is time-saving, reliable and inexpensive. Key words: Polymerase chain reaction (PCR), two-step polymerase chain reaction, three-step polymerase chain reaction, time-saving.

There are two approaches in detection of bacterium Erwinia amylovora by PCR. One is based on detection of plasmid pEA29 and the other is based on detection of a chromosomal DNA sequence, specific for E. amylovora, in a sample. Since pathogenic strains without pEA29 have been isolated from the environment, methods based on this plasmid have been compromised and PCR methods based on chromosomal DNA species specific sequences became only reliable methods. PCR method with chromosomal primers FER1-F and FER1-R is currently the most reliable method due to its high sensitivity and specificity. The goal of this research is to make a significant improvement of the method by optimization of PCR in application of hot start DNA Taq polymerase, instead of wax, to obtain a hot start reaction. This enzyme, which is currently widely applied, can provide simpler achievement of hot start, saving labor and time and decreasing possibility of cross contamination of samples. Experiments showed that simple replacement of a regular recombinant Taq DNA polymerase by a hot start Taq DNA polymerase leads to complete failure of the reaction. Many optimization experiments had to be carried out to obtain an operational and reliable PCR which simultaneously has high sensitivity and specificity. Content of the reaction mixture, as well as temperature and time parameters of PCR, were significantly changed to achieve proper optimization.

The family B DNA polymerase gene was amplified from Thermococcus celer genomic DNA by using the degenerate primers and DNA walking PCR. The Tce DNA polymerase gene was cloned and sequenced. The gene contains an ORF of 2,325 bp encoding 774 amino acid residues with a calculated molecular weight of 89,788.9 kDa. The Tce DNA polymerase was purified by heat treatment and heparin column chromatography. The optimal conditions for PCR were determined. Long-range PCR and time-saving PCR were performed using various specific ratios of Taq and Tce DNA polymerases (Tce plus DNA polymerase). Tce plus DNA polymerase surpassed the PCR performance of Tce, Taq and Pfu DNA polymerases in terms of yield and efficiency.

The biochemical properties of the Thermococcus pacificus ( Tpa ) DNA polymerase were determined to evaluate its feasibility for use in polymerase chain reaction (PCR) application. The Tpa DNA polymerase gene was expressed under the control of the T7 lac promoter in the pET-22b(+) plasmid in Escherichia coli BL21-CodonPlus(DE3)-RIL. The enzyme was then purified by heat treatment followed by two steps of column chromatography after which the optimum pH and temperature of the enzyme were determined to be pH 7.5 and 75 °C. The optimal PCR buffer for Tpa DNA polymerase consisted of 50 mM Tris–HCl (pH 8.4), 4 mM MgCl 2 , and 10 mM KCl. Tpa DNA polymerase performed significantly more efficiently in PCR amplification than Taq or Pfu DNA polymerase. By fusing the Sulfolobus solfataricus DNA binding protein Sso7d to Tpa DNA polymerase, we obtained a fusion polymerase which exhibits profound advantages over unmodified Tpa DNA polymerase in PCR applications. Tpa DNA polymerase (2.04 × 10 −6 ) and Tpa -S DNA polymerase (2.20 × 10 −6 ) revealed a 5-fold higher fidelity than Taq DNA polymerase (12.13 × 10 −6 ).

Microbes are abundant in marine and terrestrial ecosystems. However, the available evidence indicates that most microbial species in the environment cannot be cultivated. Accordingly, methodologies for characterizing genomes in environmental samples directly without cultivation have become foremost in importance. In this study, experimental conditions using PCR amplification to characterize such genomes were investigated with respect to the detection of target sequences present at low frequencies. Amplification of the isoleucyl-tRNA synthetase (IleRS) gene in Methanopyrus isolates was optimized regarding the choice of DNA polymerase, target sequence size, PCR primer size and the use of degenerate primers. Detection of IleRS was most sensitive when the target sequence size was about 1 kb. Among KOD, Taq and Pfu DNA polymerases, Pfu displayed the lowest efficiency, while KOD and Taq showed similar efficiency. Primers no shorter than 18mers gave satisfactory results. In addition, PCR bias caused by primer degeneracy could be alleviated by varying the balance between different added primers. Employing a combination of Taq DNA polymerase, a target DNA sequence approximately 1 kb in size, and primers of 20mer in length, PCR amplification of the IleRS gene could be achieved with as little as 2 pg pure isolated DNA template.

UNLABELLED PREMISE OF THE STUDY We present a rapid and inexpensive alternative to DNA isolation for polymerase chain reaction (PCR) amplification from plants. • METHODS AND RESULTS The method involves direct PCR amplification from material macerated in one buffer, followed by dilution and incubation in a second buffer. We describe the procedure and demonstrate its application for nuclear and plastid DNA amplification across a broad range of vascular plants. • CONCLUSIONS The method is fast, easy to perform, cost-effective, and consequently ideal for large sample numbers. It represents a considerable simplification of present approaches requiring DNA isolation prior to PCR amplification and will be useful in plant systematics and biotechnology, including applications such as DNA barcoding.