Search

This study experiments with different combinations of UAV hyperspectral data and LiDAR metrics for classifying eight tree species found in a Brazilian Atlantic Forest remnant, the most degraded Brazilian biome with high fragmentation but with huge structural complexity. The selection of the species was done based on the number of tree samples, which exist in the plot data and in the fact the UAV imagery does not acquire information below the forest canopy. Due to the complexity of the forest, only species that exist in the upper canopy of the remnant were included in the classification. A combination of hyperspectral UAV images and LiDAR point clouds were in the experiment. The hyperspectral images were photogrammetric and radiometric processed to obtain orthomosaics with reflectance factor values. Raw spectra were extracted from the trees, and vegetation indices (VIs) were calculated. Regarding the LiDAR data, both the point cloud—referred to as Peak Returns (PR)—and the full-waveform (FWF) LiDAR were included in this study. The point clouds were processed to normalize the intensities and heights, and different metrics for each data type (PR and FWF) were extracted. Segmentation was preformed semi-automatically using the superpixel algorithm, followed with manual correction to ensure precise tree crown delineation before tree species classification. Thirteen different classification scenarios were tested. The scenarios included spectral features and LiDAR metrics either combined or not. The best result was obtained with all features transformed with principal component analysis with an accuracy of 76%, which did not differ significantly from the scenarios using the raw spectra or VIs with PR or FWF LiDAR metrics. The combination of spectral data with geometric information from LiDAR improved the classification of tree species in a complex tropical forest, and these results can serve to inform management and conservation practices of these forest remnants.

One of the major challenges in precision viticulture in Europe is the detection and mapping of flavescence dorée (FD) grapevine disease to monitor and contain its spread. The lack of effective cures and the need for sustainable preventive measures are nowadays crucial issues. Insecticides and the plants uprooting are commonly employed to withhold disease infection, even if these solutions imply serious economic consequences and a strong environmental impact. The development of a rapid strategy to identify the disease is required to cover large portions of the crop and thus to limit damages in a time-effective way. This paper investigates the use of Unmanned Aerial Vehicles (UAVs), a cost-effective approach to early detection of diseased areas. We address this task with an object detection deep network, Faster R-CNN, instead of a traditional pixel-wise classifier. This work tests Faster R-CNN performance on this specific application through a comparative analysis with a pixel-wise classification algorithm (Random Forest). To take advantage of the full image resolution, the experimental analysis is performed using the original UAV imagery acquired in real conditions (instead of the derived orthomosaic). The first result of this paper is the definition of a new dataset for FD disease identification by UAV original imagery at the canopy scale. Moreover, we demonstrate the feasibility of applying Faster-R-CNN as a quasi-real-time alternative solution to semantic segmentation. The trained Faster-R-CNN achieved an average precision of 82% on the test set.

Dynamic Time Warping (DTW) has been successfully used for crops mapping due to its capability to achieve good classification results when a reduced number of training samples and irregular satellite image time series is available. Despite its recognized advantages, DTW does not account for the duration and seasonality of crops and local differences when assessing the similarity between two temporal sequences. In this study, we implemented a Weighted Derivative modification of DTW (WDDTW) and compared it with DTW and Time Weighted Dynamic Time Warping (TWDTW) for crops mapping. We show that WDDTW outperformed DTW achieving an overall accuracy of 67 %, whereas DTW obtained an accuracy of 57%. Yet, TWDTW performed better than both methods obtaining an accuracy of 88%.

Crop lodging – the bending of crop stems from the vertical – is a major yield-reducing factor in cereal crops and causes deterioration in grain quality. Accurate assessment of crop lodging is important for improving estimates of crop yield losses, informing insurance loss adjusters and influencing management decisions for subsequent seasons. The role of remote sensing data, particularly synthetic aperture radar (SAR) data has been emphasized in the recent literature for crop lodging assessment. However, the effect of lodging on SAR scattering mechanisms is still unknown. Therefore, this research aims to understand the possible change in scattering mechanisms due to lodging by investigating SAR image pairs before and after lodging. We conducted the study in 26 wheat fields in the Bonifiche Ferraresi farm, located in Jolanda di Savoia, Ferrara, Italy. We measured temporal crop biophysical (e.g. crop angle) parameters and acquired multi-incidence angle RADARSAT-2 (R-2 FQ8-27° and R-2 FQ21-41°) and Sentinel-1 (S-1 40°) images corresponding to the time of field observations. We extracted metrics of SAR scattering mechanisms from RADARSAT-2 and Sentinel-1 image pairs in different zones using the unsupervised H/α decomposition algorithm and Wishart classifier. Contrasting results were obtained at different incidence angles. Bragg surface scattering increased in the case of S-1 (6.8%), R-2 FQ8 (1.8%) while at R-2 FQ21, it decreased (8%) after lodging. The change in double bounce scattering was more prominent at low incidence angle. These observations can guide future use of SAR-based information for operational crop lodging assessment in particular, and sustainable agriculture in general.

Updated information on urban land use allows city planners and decision makers to conduct large scale monitoring of urban areas for sustainable urban growth. Remote sensing data and classification methods offer an efficient and reliable way to update such land use maps. Features extracted from land cover maps are helpful on performing a land use classification task. Such prior information can be embedded in the design of a deep learning based land use classifier by applying a multitask learning setup—simultaneously solving a land use and a land cover classification task. In this study, we explore a fully convolutional multitask network to classify urban land use from very high resolution (VHR) imagery. We experimented with three different setups of the fully convolutional network and compared it against a baseline random forest classifier. The first setup is a standard network only predicting the land use class of each pixel in the image. The second setup is a multitask network that concatenates the land use and land cover class labels in the same output layer of the network while the other setup accept as an input the land cover predictions, predicted by a subpart of the network, concatenated to the original input image patches. The two deep multitask networks outperforms the other two classifiers by at least 30% in average F1-score.

Land cover describes the physical material of the earth’s surface, whereas land use describes the socio-economic function of a piece of land. Land use information is typically collected in geospatial databases. As such databases become outdated quickly, an automatic update process is required. This paper presents a new approach to determine land cover and to classify land use objects based on convolutional neural networks (CNN). The input data are aerial images and derived data such as digital surface models. Firstly, we apply a CNN to determine the land cover for each pixel of the input image. We compare different CNN structures, all of them based on an encoder-decoder structure for obtaining dense class predictions. Secondly, we propose a new CNN-based methodology for the prediction of the land use label of objects from a geospatial database. In this context, we present a strategy for generating image patches of identical size from the input data, which are classified by a CNN. Again, we compare different CNN architectures. Our experiments show that an overall accuracy of up to 85.7 % and 77.4 % can be achieved for land cover and land use, respectively. The classification of land cover has a positive contribution to the classification of the land use classification.

In this paper we investigate the potential of automatic supervised classification for urban hydrological applications. In particular, we contribute to runoff simulations using hydrodynamic urban drainage models. In order to assess whether the capacity of the sewers is sufficient to avoid surcharge within certain return periods, precipitation is transformed into runoff. The transformation of precipitation into runoff requires knowledge about the proportion of drainage-effective areas and their spatial distribution in the catchment area. Common simulation methods use the coefficient of imperviousness as an important parameter to estimate the overland flow, which subsequently contributes to the pipe flow. The coefficient of imperviousness is the percentage of area covered by impervious surfaces such as roofs or road surfaces. It is still common practice to assign the coefficient of imperviousness for each particular land parcel manually by visual interpretation of aerial images. Based on classification results of these imagery we contribute to an objective automatic determination of the coefficient of imperviousness. In this context we compare two classification techniques: Random Forests (RF) and Conditional Random Fields (CRF). Experimental results performed on an urban test area show good results and confirm that the automated derivation of the coefficient of imperviousness, apart from being more objective and, thus, reproducible, delivers more accurate results than the interactive estimation. We achieve an overall accuracy of about 85 % for both classifiers. The root mean square error of the differences of the coefficient of imperviousness compared to the reference is 4.4 % for the CRF-based classification, and 3.8 % for the RF-based classification.

Topopographic mapping issues concern the area coverage at different scales and their age. The age of the map is determined by the system of updating. The United Nations (UNGGIM) have attempted to track the global map coverage at various scale ranges, which has greatly improved in recent decades. However the poor state of updating of base maps is still a global problem. In Saudi Arabia large scale mapping is carried out for all urban, suburban and rural areas by aerial surveys. Updating is carried out by remapping every 5 to 10 years. Due to the rapid urban development this is not satisfactory, but faster update methods are forseen by use of high resolution satellite imagery and the improvement of object oriented geodatabase structures, which will permit to utilize various survey technologies to update the photogrammetry established geodatabases. The longterm goal is to create an geodata infrastructure, which exists in Great Britain or Germany.

The aftermath of wartime attacks is often felt long after the war ended, as numerous unexploded bombs may still exist in the ground. Typically, such areas are documented in so-called impact maps which are based on the detection of bomb craters. This paper proposes a method for the automatic detection of bomb craters in aerial wartime images that were taken during the Second World War. The object model for the bomb craters is represented by ellipses. A probabilistic approach based on marked point processes determines the most likely configuration of objects within the scene. Adding and removing new objects to and from the current configuration, respectively, changing their positions and modifying the ellipse parameters randomly creates new object configurations. Each configuration is evaluated using an energy function. High gradient magnitudes along the border of the ellipse are favored and overlapping ellipses are penalized. Reversible Jump Markov Chain Monte Carlo sampling in combination with simulated annealing provides the global energy optimum, which describes the conformance with a predefined model. For generating the impact map a probability map is defined which is created from the automatic detections via kernel density estimation. By setting a threshold, areas around the detections are classified as contaminated or uncontaminated sites, respectively. Our results show the general potential of the method for the automatic detection of bomb craters and its automated generation of an impact map in a heterogeneous image stock.

Interferometric wide-swath mode of Sentinel-1, which is implemented by Terrain Observation by Progressive Scan (TOPS) technique, is the main mode of SAR data acquisition in this mission. It aims at global monitoring of large areas with enhanced revisit frequency of 6 days at the expense of reduced azimuth resolution, compared to classical ScanSAR mode. TOPS technique is equipped by steering the beam from backward to forward along the heading direction for each burst, in addition to the steering along the range direction, which is the only sweeping direction in standard ScanSAR mode. This leads to difficulty in measuring along-track displacement by applying the conventional method of multi-aperture interferometry (MAI), which exploits a double difference interferometry to estimate azimuth offset. There is a possibility to solve this issue by a technique called “Burst Overlap Interferometry” which focuses on the region of burst overlap. Taking advantage of large squint angle diversity of ~1° in burst overlapped area leads to improve the accuracy of ground motion measurement especially in along-track direction. We investigate the advantage of SAR Interferometry (InSAR), burst overlap interferometry and offset tracking to investigate coseismic deformation and coseismic-induced landslide related to 12 November 2017 Mw 7.3 Sarpol-e Zahab earthquake in Iran.

Natural disturbances such as wind are known to cause threats to ecosystem services as well as sustainable forest ecosystem management. The objective of this research was to better understand and quantify drivers of predisposition to wind disturbance, and to model and map the probability of wind-induced forest disturbances (PDIS) in order to support forest management planning. To accomplish this, we used open-access airborne light detection and ranging (LiDAR) data as well as multi-source National Forest Inventory (NFI) data to model PDIS in southern Finland. A strong winter storm occurred in the study area in December 2011. High spatial resolution aerial images, acquired after the disturbance event, were used as reference data. Potential drivers associated with PDIS were examined using a multivariate logistic regression model. The model based on LiDAR provided good agreement with detected areas susceptible to wind disturbance (73%); however, when LiDAR was combined with multi-source NFI data, the results ...