Search

Microfluidic devices for dielectrophoretic cell separation are typically designed and constructed using microfabrication methods in a clean room, requiring time and expense. In this paper, we describe a novel alternative approach to microfluidic device manufacture, using chips cut from conductor-insulator laminates using a cutter plotter. This allows the manufacture of microchannel devices with micron-scale electrodes along every wall. Fabrication uses a conventional desktop cutter plotter, and requires no chemicals, masks or clean-room access; functional fluidic devices can be designed and constructed within a couple of hours at negligible cost. As an example, we demonstrate the construction of a continuous dielectrophoretic cell separator capable of enriching yeast cells to 80% purity at 10 000 cells/s., (© 2022 The Authors. Electrophoresis published by Wiley-VCH GmbH.)

Background: Delays in the identification and referral of oral cancer remain frequent. An accurate and non-invasive diagnostic test to be performed in primary care may help identifying oral cancer at an early stage and reduce mortality. Point-of-care Analysis for Non-invasive Diagnosis of Oral cancer (PANDORA) was a proof-of-concept prospective diagnostic accuracy study aimed at advancing the development of a dielectrophoresis-based diagnostic platform for oral squamous cell carcinoma (OSCC) and epithelial dysplasia (OED) using a novel automated DEPtech 3DEP analyser., Methods: The aim of PANDORA was to identify the set-up of the DEPtech 3DEP analyser associated with the highest diagnostic accuracy in identifying OSCC and OED from non-invasive brush biopsy samples, as compared to the gold standard test (histopathology). Measures of accuracy included sensitivity, specificity, positive and negative predictive value. Brush biopsies were collected from individuals with histologically proven OSCC and OED, histologically proven benign mucosal disease, and healthy mucosa (standard test), and analysed via dielectrophoresis (index test)., Results: 40 individuals with OSCC/OED and 79 with benign oral mucosal disease/healthy mucosa were recruited. Sensitivity and specificity of the index test was 86.8% (95% confidence interval [CI], 71.9%-95.6%) and 83.6% (95% CI, 73.0%-91.2%). Analysing OSCC samples separately led to higher diagnostic accuracy, with 92.0% (95% CI, 74.0%-99.0%) sensitivity and 94.5% (95% CI, 86.6%-98.5%) specificity., Conclusion: The DEPtech 3DEP analyser has the potential to identify OSCC and OED with notable diagnostic accuracy and warrants further investigation as a potential triage test in the primary care setting for patients who may need to progress along the diagnostic pathway and be offered a surgical biopsy., (© 2023 The Authors. Journal of Oral Pathology & Medicine published by John Wiley & Sons Ltd.)

During exercise, mechanical loads from the body are transduced into interstitial fluid pressure changes which are sensed as dynamic hydrostatic forces by cells in cartilage. The effects of these loading forces in health and disease are of interest to biologists, but the availability of affordable equipment for in vitro experimentation is an obstacle to research progress. Here, we report the development of a cost-effective hydropneumatic bioreactor system for research in mechanobiology. The bioreactor was assembled from readily available components (a closed-loop stepped motor and pneumatic actuator) and a minimal number of easily-machined crankshaft parts, whilst the cell culture chambers were custom designed by the biologists using CAD and entirely 3 D printed in PLA. The bioreactor system was shown to be capable of providing cyclic pulsed pressure waves at a user-defined amplitude and frequency ranging from 0 to 400 kPa and up to 3.5 Hz, which are physiologically relevant for cartilage. Tissue engineered cartilage was created from primary human chondrocytes and cultured in the bioreactor for five days with three hours/day cyclic pressure (300 kPa at 1 Hz), simulating moderate physical exercise. Bioreactor-stimulated chondrocytes significantly increased their metabolic activity (by 21%) and glycosaminoglycan synthesis (by 24%), demonstrating effective cellular transduction of mechanosensing. Our Open Design approach focused on using 'off-the-shelf' pneumatic hardware and connectors, open source software and in-house 3 D printing of bespoke cell culture containers to resolve long-standing problems in the availability of affordable bioreactors for laboratory research., Competing Interests: The authors declare there are no conflicts of interest., (© 2022 The Author(s). Published with license by Taylor & Francis Group, LLC.)

Electrical correlates of the physiological state of a cell, such as membrane conductance and capacitance, as well as cytoplasm conductivity, contain vital information about cellular function, ion transport across the membrane, and propagation of electrical signals. They are, however, difficult to measure; gold-standard techniques are typically unable to measure more than a few cells per day, making widespread adoption difficult and limiting statistical reproducibility. We have developed a dielectrophoretic platform using a disposable 3D electrode geometry that accurately (r 2  > 0.99) measures mean electrical properties of populations of ~20,000 cells, by taking parallel ensemble measurements of cells at 20 frequencies up to 45 MHz, in (typically) ten seconds. This allows acquisition of ultra-high-resolution (100-point) DEP spectra in under two minutes. Data acquired from a wide range of cells - from platelets to large cardiac cells - benchmark well with patch-clamp-data. These advantages are collectively demonstrated in a longitudinal (same-animal) study of rapidly-changing phenomena such as ultradian (2-3 hour) rhythmicity in whole blood samples of the common vole (Microtus arvalis), taken from 10 µl tail-nick blood samples and avoiding sacrifice of the animal that is typically required in these studies.

Circadian rhythms organize many aspects of cell biology and physiology to a daily temporal program that depends on clock gene expression cycles in most mammalian cell types. However, circadian rhythms are also observed in isolated mammalian red blood cells (RBCs), which lack nuclei, suggesting the existence of post-translational cellular clock mechanisms in these cells. Here we show using electrophysiological and pharmacological approaches that human RBCs display circadian regulation of membrane conductance and cytoplasmic conductivity that depends on the cycling of cytoplasmic K + levels. Using pharmacological intervention and ion replacement, we show that inhibition of K + transport abolishes RBC electrophysiological rhythms. Our results suggest that in the absence of conventional transcription cycles, RBCs maintain a circadian rhythm in membrane electrophysiology through dynamic regulation of K + transport.

Currently, cell separation occurs almost exclusively by density gradient methods and by fluorescence- and magnetic-activated cell sorting (FACS/MACS). These variously suffer from lack of specificity, high cell loss, use of labels, and high capital/operating cost. We present a dielectrophoresis (DEP)-based cell-separation method, using 3D electrodes on a low-cost disposable chip; one cell type is allowed to pass through the chip whereas the other is retained and subsequently recovered. The method advances usability and throughput of DEP separation by orders of magnitude in throughput, efficiency, purity, recovery (cells arriving in the correct output fraction), cell losses (those which are unaccounted for at the end of the separation), and cost. The system was evaluated using three example separations: live and dead yeast; human cancer cells/red blood cells; and rodent fibroblasts/red blood cells. A single-pass protocol can enrich cells with cell recovery of up to 91.3% at over 300,000 cells per second with >3% cell loss. A two-pass protocol can process 300,000,000 cells in under 30 min, with cell recovery of up to 96.4% and cell losses below 5%, an effective processing rate >160,000 cells per second. A three-step protocol is shown to be effective for removal of 99.1% of RBCs spiked with 1% cancer cells while maintaining a processing rate of ∼170,000 cells per second. Furthermore, the self-contained and low-cost nature of the separator device means that it has potential application in low-contamination applications such as cell therapies, where good manufacturing practice compatibility is of paramount importance., Competing Interests: Conflict of interest statement: The authors declare a conflict of interest. K.F.H. and M.P.H. are named on a patent (US Patent 8864973, granted 2014) describing the use of 3D multilayer laminate electrodes to construct DEP electrodes. This technology was used to construct the electrode chips used in this project.

The use of high quality semiconducting nanomaterials for advanced device applications has been hampered by the unavoidable variability in the growth of one-dimensional (1D) nanomaterials such as nanowires (NWs) and nanotubes, resulting in highly variable electrical properties across the population. Therefore, assessment of the quality of nanomaterials is vital for the fabrication of high-performance and reliable electronic devices. The controllable selection of high quality NWs has been recently demonstrated using a dielectrophoretic (DEP) NW assembly method; however, no convenient, rapid method has been adopted for the characterization of nanomaterial semiconducting properties. In this study, we solve this challenge with a low-cost, industrially scalable method for the rapid analysis of the electrical properties of inorganic single crystalline NWs, by identifying key features in the DEP frequency response spectrum (1 kHz - 20 MHz). NWs dispersed in anisole were characterized using a three-dimensional DEP chip (3DEP) in 60 seconds, and the resultant spectrum demonstrated a sharp change in NW response to DEP signal in 1 MHz - 20 MHz frequency rage. The 3DEP analysis, confirmed by field-effect transistor (FET) data, indicates that NWs with higher quality are collected at high DEP signal frequency range such as above 10 MHz. These results show that platforms such as the 3DEP, can be used for the characterization of rod-shaped nanoscale particles where the dipole moment is sufficiently large. It also shows that the 3DEP can be used to assess heterogeneous nanoparticle mixtures and identify nanomaterials with superior conductivity properties. The proposed methodology can be applied to any type of 1D nanomaterials. The 3DEP analysis coupled with dielectrophoretic assembly for the deposition of NWs at selected signal frequencies, leads to a reproducible fabrication of high quality NW FET devices.

A loss of ability of cells to undergo apoptosis (programmed cell death, whereby the cell ceases to function and destroys itself) is commonly associated with cancer, and many anti-cancer interventions aim to restart the process. Consequently, the accurate quantification of apoptosis is essential in understanding the function and performance of new anti-cancer drugs. Dielectrophoresis has previously been demonstrated to detect apoptosis more rapidly than other methods, and is low-cost, label-free and rapid, but has previously been unable to accurately quantify cells through the apoptotic process because cells in late apoptosis disintegrate, making cell tracking impossible. In this paper we use a novel method based on light absorbance and multi-population tracking to quantify the progress of apoptosis, benchmarking against conventional assays including MTT, trypan blue and Annexin-V. Analyses are performed on suspension and adherent cells, and using two apoptosis-inducing agents. IC 50 measurements compared favourably to MTT and were superior to trypan blue, whilst also detecting apoptotic progression faster than Annexin-V.

Semiconducting nanowires (NWs) are becoming essential nanobuilding blocks for advanced devices from sensors to energy harvesters, however their full technology penetration requires large scale materials synthesis together with efficient NW assembly methods. We demonstrate a scalable one-step solution process for the direct selection, collection, and ordered assembly of silicon NWs with desired electrical properties from a poly disperse collection of NWs obtained from a supercritical fluid-liquid-solid growth process. Dielectrophoresis (DEP) combined with impedance spectroscopy provides a selection mechanism at high signal frequencies (>500 kHz) to isolate NWs with the highest conductivity and lowest defect density. The technique allows simultaneous control of five key parameters in NW assembly: selection of electrical properties, control of NW length, placement in predefined electrode areas, highly preferential orientation along the device channel, and control of NWs deposition density from few to hundreds per device. Direct correlation between DEP signal frequency and deposited NWs conductivity is confirmed by field-effect transistor and conducting AFM data. Fabricated NW transistor devices demonstrate excellent performance with up to 1.6 mA current, 10(6)-10(7) on/off ratio and hole mobility of 50 cm(2) V(-1) s(-1).

Apoptosis is characterised by many cellular events, but the standard Annexin-V assay identifies two; the transfer of the phospholipid phosphatidylserine (PS) from inner to outer leaflets of the plasma membrane, acting as an "eat me" signal to macrophages, and the permeabilisation of the plasma membrane. In this paper we compare the results from the Annexin-V assay with electrophysiology data obtained in parallel using dielectrophoresis, which highlights two changes in cell electrophysiology; a change in cytoplasmic conductivity which correlates with PS expression, and a membrane conductance spike that correlates with permeabilisation. Combining results from both methods shows a strong inverse relationship between conductivity and PS externalisation. One mechanism which may explain this correlation is related to intracellular Ca(2+), which is known to increase early in apoptosis. PS expression occurs when enzymes called scramblases swap external and internal phospholipids, and which are usually activated by Ca(2+), whilst the change in cytoplasmic conductivity may be due to K(+) efflux from intermediate conductance (IK) ion channels that are also activated by Ca(2+).

Despite the accessibility of the oral cavity to clinical examination, delays in diagnosis of oral and oropharyngeal carcinoma (OOPC) are observed in a large majority of patients, with negative impact on prognosis. Diagnostic aids might help detection and improve early diagnosis, but there remains little robust evidence supporting the use of any particular diagnostic technology at the moment. The aim of the present feasibility first-in-human study was to evaluate the preliminary diagnostic validity of a novel technology platform based on dielectrophoresis (DEP). DEP does not require labeling with antibodies or stains and it is an ideal tool for rapid analysis of cell properties. Cells from OOPC/dysplasia tissue and healthy oral mucosa were collected from 57 study participants via minimally-invasive brush biopsies and tested with a prototype DEP platform using median membrane midpoint frequency as main analysis parameter. Results indicate that the current DEP platform can discriminate between brush biopsy samples from cancerous and healthy oral tissue with a diagnostic sensitivity of 81.6% and a specificity of 81.0%. The present ex vivo results support the potential application of DEP testing for identification of OOPC. This result indicates that DEP has the potential to be developed into a low-cost, rapid platform as an assistive tool for the early identification of oral cancer in primary care; given the rapid, minimally-invasive and non-expensive nature of the test, dielectric characterization represents a promising platform for cost-effective early cancer detection.

Achieving real-time detection of environmental pathogens such as viruses and bacterial spores requires detectors with both rapid action and a suitable detection threshold. However, most biosensors have detection limits of an order of magnitude or more above the potential infection threshold, limiting their usefulness. This can be improved through the use of automated sample preparation techniques such as preconcentration. In this paper, we describe the use of AC electroosmosis to concentrate nanoparticles from a continuous flow. Electrodes at an optimized angle across a flow cell, and energized by a 1 kHz signal, were used to push nanoparticles to one side of a flow cell, and to extract the resulting stream with a high particle concentration from that side of the flow cell. A simple model of the behavior of particles in the flow cell has been developed, which shows good agreement with experimental results. The method indicates potential for higher concentration factors through cascading devices., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Alternating-current electro-osmosis, a phenomenon of fluid transport due to the interaction between an electrical double layer and a tangential electric field, has been used both for inducing fluid movement and for the concentration of particles suspended in the fluid. This offers many advantages over other phenomena used to trap particles, such as placing particles at an electrode centre rather than an edge; benefits of scale, where electrodes hundreds of micrometers across can trap particles from the molecules to cells at the same rate; and a trapping volume limited by the vortex height, a phenomenon thus far unstudied. In this paper, the collection of particles due to alternating-current electro-osmosis driven collection is examined for a range of particle concentrations, inter-electrode gap widths, chamber heights and media viscosity and density. A model of collection behaviour is described where particle collection over time is governed by two processes, one driven by the vortices and the other by sedimentation, allowing the determination of the maximum height of vortex-driven collection, but also indicates how trapping is limited by high particle concentrations and fluid velocities. The results also indicate that viscosity, rather than density, is a significant governing factor in determining the trapping behaviour of particles., (© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Whilst laboratory-on-chip cell separation systems using dielectrophoresis are increasingly reported in the literature, many systems are afflicted by factors which impede "real world" performance, chief among these being cell loss (in dead spaces, attached to glass and tubing surfaces, or sedimentation from flow), and designs with large channel height-to-width ratios (large channel widths, small channel heights) that make the systems difficult to interface with other microfluidic systems. In this paper, we present a scalable structure based on 3D wells with approximately unity height-to-width ratios (based on tubes with electrodes on the sides), which is capable of enriching yeast cell populations whilst ensuring that up to 94.3% of cells processed through the device can be collected in tubes beyond the output.

The present work focuses on nanowire (NW) applications as semiconducting elements in solution processable field-effect transistors (FETs) targeting large-area low-cost electronics. We address one of the main challenges related to NW deposition and alignment by using dielectrophoresis (DEP) to select multiple ZnO nanowires with the correct length, and to attract, orientate and position them in predefined substrate locations. High-performance top-gate ZnO NW FETs are demonstrated on glass substrates with organic gate dielectric layers and surround source-drain contacts. Such devices are hybrids, in which inorganic multiple single-crystal ZnO NWs and organic gate dielectric are synergic in a single system. Current-voltage (I-V) measurements of a representative hybrid device demonstrate excellent device performance with high on/off ratio of ~10(7), steep subthreshold swing (s-s) of ~400 mV/dec and high electron mobility of ~35 cm(2) V(-1) s(-1) in N2 ambient. Stable device operation is demonstrated after 3 months of air exposure, where similar device parameters are extracted including on/off ratio of ~4 × 10(6), s-s ~500 mV/dec and field-effect mobility of ~28 cm(2) V(-1) s(-1). These results demonstrate that DEP can be used to assemble multiples of NWs from solvent formulations to enable low-temperature hybrid transistor fabrication for large-area inexpensive electronics.

Dielectrophoresis (DEP) has been used for many years for the analysis of the electrophysiological properties of cells. However, such analyses have in the past been time-consuming, such that it can take 30 min or more to collect sufficient data to make valid interpretations from a single DEP spectrum. This has limited the application of the technology to a rapid tool for non-invasive, label-free research in areas from drug discovery to diagnostics. In this paper we present the development of a programmable, multi-channel DEP system for rapid biophysical assessment of populations of biological cells. A new assay format has been developed for continuous near-real-time monitoring, using simultaneous application of up to eight alternating current electrical signals to independently addressable dot microelectrodes in an array format, allowing a DEP spectrum to be measured in 20 s, with a total cycle time between measurements of 90 s. To demonstrate the system, human leukaemic K562 cells were monitored after exposure to staurosporine and valinomycin. The DEP response curves showed the timing and manner in which the membrane properties changed for the actions of these two drugs at the early phase of induction. This technology shows the great potential for increasing our understanding of the role of electrophysiology in drug action, by observing the changes in electrical characteristics as they occur., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Dielectrophoresis (DEP) is a physical effect that generates a force on polarisable particles experiencing a non-homogeneous electric field; studying the effect as a function of frequency allows the determination of the electrical properties of that particle, i.e., the electrical permittivity and conductivity. In the past, DEP-based techniques applied to the measurement of one or several cells at a time have been subject to many sources of noise, which result in an ambiguous or inaccurate result. However, improvements are possible by generating more information from the experiments. In this paper, we present a rapid automated system that measures the DEP spectrum from a large population of cells with a low level of noise using the microwell electrodes, based on a method of analysis that provides additional information about the electrical properties of the cells and a new theoretical approach was developed to obtain accurate, bias-free results in <5 min., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Background: Distinguishing human neural stem/progenitor cell (huNSPC) populations that will predominantly generate neurons from those that produce glia is currently hampered by a lack of sufficient cell type-specific surface markers predictive of fate potential. This limits investigation of lineage-biased progenitors and their potential use as therapeutic agents. A live-cell biophysical and label-free measure of fate potential would solve this problem by obviating the need for specific cell surface markers., Methodology/principal Findings: We used dielectrophoresis (DEP) to analyze the biophysical, specifically electrophysiological, properties of cortical human and mouse NSPCs that vary in differentiation potential. Our data demonstrate that the electrophysiological property membrane capacitance inversely correlates with the neurogenic potential of NSPCs. Furthermore, as huNSPCs are continually passaged they decrease neuron generation and increase membrane capacitance, confirming that this parameter dynamically predicts and negatively correlates with neurogenic potential. In contrast, differences in membrane conductance between NSPCs do not consistently correlate with the ability of the cells to generate neurons. DEP crossover frequency, which is a quantitative measure of cell behavior in DEP, directly correlates with neuron generation of NSPCs, indicating a potential mechanism to separate stem cells biased to particular differentiated cell fates., Conclusions/significance: We show here that whole cell membrane capacitance, but not membrane conductance, reflects and predicts the neurogenic potential of human and mouse NSPCs. Stem cell biophysical characteristics therefore provide a completely novel and quantitative measure of stem cell fate potential and a label-free means to identify neuron- or glial-biased progenitors.

Dielectrophoresis (DEP) is a technique which offers label-free measurement of cell electrophysiology by monitoring its movement in non-uniform electric fields. In this chapter, the theory underlying DEP is explored, as are the implications of the development of equipment for taking such measurements. Practical considerations such as the selection of a suspending medium are also discussed.

Dielectrophoresis (DEP) offers many advantages over conventional cell assays such as flow cytometry and patch clamp techniques for assessing cell electrophysiology as a marker for cancer studies and drug interaction assessment. However, despite the advantages offered by DEP analysis, uptake has been low, remaining largely in the academic arena, due to the process of analysis being time-consuming, laborious, and ultimately allowing only serial analysis on small numbers of cells. In this paper we describe a new method of performing DEP analysis based on laminate manufacturing methods. These use a three-dimensional "well" structure, similar in size and pitch to conventional microtiter well plates, but offer electrodes along the inner surface to allow easy measurement of cell properties through the whole population. The result can then be determined rapidly using a conventional well-plate reader. The nature of the device means that many electrodes, each containing a separate sample, can be tested in parallel, while the mode of observation means that analysis can be combined with simultaneous measurement of conventional fluorimetric well-based assays. Here we benchmark the device against standard DEP assays, then show how such a device can be used to (a) rapidly determine the effects both of ion channel blockers on cancer cells and antibiotics on bacteria and (b) determine the properties of multiple subpopulations of cells within a well simultaneously.

Dielectrophoresis is a technique whereby polarisable particles are manipulated by non-uniform alternating electric fields. A specific application of this technique is deducing the dielectric properties of cells from analysis of the dielectrophoretic spectrum of that particular cell population. We have developed a new microelectrode geometry consisting of two parallel electrode planes, one of which is patterned with arrays of circular apertures or 'dots'. The radial symmetry of the dots means that the polarisability of the particles within the dot can be directly related to change shifts in light transmission through the dot, and quantified from analysis of digital images. We have validated our system using well-characterised cell types and found a high degree of agreement to published data. Furthermore, we have observed that at high particle concentrations, electrostatic inter-particle repulsion causes spontaneous, rapid particle re-dispersion over the dot volume upon removal of an applied electric field. This allows the automated acquisition of a spectrum of 26 data points in approximately 15 min.

In recent years, infections due to antibiotic-resistant strains of bacteria such as methicillin-resistant Staphylococcus aureus and ciprofloxacin-resistant Escherichia coli are on the rise, and with them the demand for rapid antibiotic testing is also rising. Conventional tests, such as disc diffusion testing, require a primary sample to be tested in the presence of a number of antibiotics to verify which antibiotics suppress growth, which take approximately 24 h to complete and potentially place the patient at severe risk. In this paper we describe the use of dielectrophoresis as a rapid marker of cell death, by detecting changes in the electrophysiology of the cell caused by the administration of an antibiotic. In contrast to other markers, the electrophysiology of the cell changes rapidly during cell death allowing live cells to be distinguished from dead (or dying) cells without the need for culturing. Using polymyxin B as an example antibiotic, our studies indicate that significant changes in cell characteristics can be observed as soon as 1 h passes after isolating a culture from nutrient broth.

A factor limiting the detection time of biological particles using a quartz crystal microbalance (QCM) system is the kinetics of the particles arriving within the sensing region of the crystal surface. A device has been developed which, for the first time, combines ac electro-kinetic particle manipulation with simultaneous acoustic sensing on an electrode surface. We have termed this device a dielectrophoretic quartz crystal microbalance (DEP-QCM). Particles within the system are rapidly driven by electro-hydrodynamic and dielectrophoretic forces on to the crystal surface. Frequency shift analysis of mass-loaded DEP-QCM, induced by fluid motion, has shown significant improvements in rates of detection based on particle concentration, with steady-state responses established by a factor of five times faster than other quartz crystal microbalance surface loading techniques described in the literature. Comparisons of the static fluid case for QCM devices revealed that particles with a concentration of less than 10(8) nano-spheres/ml could not be detected within a 1h time period when allowed to sediment.

A major problem for surface-based detection techniques such as surface plasmon resonance and quartz crystal microbalances is that at low concentrations, diffusion is an insufficient driving force to bring colloidal submicron-scale particles to the detection surface. In order to overcome this, it has previously been demonstrated that a combination of dielectrophoresis and AC-electro-hydrodynamic flow can be used to focus cell-sized particles from suspension onto a large metal surface, in order to improve the detection capabilities of such systems. In this paper we describe how the combination of these two phenomena, using the so-called "zipper" electrode array, can be used to concentrate a wide range of nanoparticles of biological interest, such as influenza virus, dissolved albumin, and DNA molecules as well as latex beads of various sizes. We also demonstrate that the speed at which particles are transported towards the centre of the electrode pads by dielectrophoresis and electro-hydrodynamic flow is not related to the particle size for colloidal particles.

A type of well-based assay that uses a laminated three-dimensional electrode design to characterise the effects of different drugs on red blood cells using dielectrophoresis is presented. The capability of the system to determine the effects of chemical agents on the electrophysiology of red blood cells is demonstrated using saponin and valinomycin as two examples of drugs that can penetrate the cell membrane and therefore change the dielectric properties of the cell. Light intensity changes are measured in the well over a period of time at various frequencies and the dielectric properties of the cells determined using an ellipsoidal multi-shell model. It is shown that the laminated electrode permits a high degree of automation and thus a high number of parallel experiments, which reduces both the time and effort needed to examine differences between populations of red blood cells. The technique is directly compatible with the industry-standard 1536 well-plate analysis technique.

A method is described whereby dielectrophoresis of algal cells is used to perform rapid water quality analysis, specifically detecting the presence of CuSO4. The dielectric collection spectrum of the fresh water alga Selenastrum capricornutum was determined for a range of concentrations of CuSO4 from 25 mg L(-1) to 0.25 mg L(-1) for exposure times of 15 min and 18 h. In all cases increasing the concentration of CuSO4 reduced cell collection, but a step reduction was observed in collection between 2 mg L(-1) and 5 mg L(-1). This method has potential for forming a rapid, low-cost test for water quality with broad specificity and significantly reduced analysis time compared to current methods.