Search

Sandro Hodel,1 Christoph Laux,1 Jan Farei-Campagna,1 Tobias Götschi,1 Beata Bode-Lesniewska,2 Daniel Andreas Müller1 1Orthopaedic Department, Balgrist University Hospital, Zürich, Switzerland; 2Department of Pathology, University Hospital Zurich, Zürich, Switzerland Purpose: To examine the frequency of computed tomography (CT)-guided biopsy sampling errors in chondrosarcomas, as well as the impact of these errors and the achieved surgical margins on local recurrence-free survival (LRFS) and disease-specific survival (DSS). Material and methods: A total of 68 consecutive patients treated for chondrosarcoma from 2000–2015 were retrospectively reviewed with a minimum follow-up duration of 2 years. Results: The primary location was at the extremities in 46 patients (67.6%) and at the axial skeleton in 22 patients (32.4%). Seven patients underwent planned intralesional curettage. Surgical margins were assessed in the remaining 53 patients and included 21 wide (39.6%), 25 marginal (47.1%), and seven intralesional (13.2%) resections. Biopsy sampling errors occurred in ten patients (14.7%). LRFS was 82.2±7.8% at 5 years and 76.9±7.8% at 10 years. An intact anatomical barrier was associated with the most preferable LRFS of 89±10.5% after 10 years. DSS was 79.2±8.5% at 5 years and 75.5±6.4% at 10 years. The metric distance of the surgical margin and the presence of a biopsy sampling error did not affect either LRFS or DSS. Conclusion: Even though histological grading in chondrosarcoma is difficult, sampling errors in preoperative biopsies are relatively rare and do not adversely affect outcomes. The presence of an anatomical barrier has a greater impact on LRFS than the metric distance of the surgical margins. Keywords: bone tumor, chondrosarcoma, survival, local recurrence, surgical margin, biopsy sampling error

Background: Dogs with chronic inflammatory enteropathy (CIE) are typically classified into food-responsive enteropathy (FRE), antibiotic-responsive enteropathy (ARE), immunomodulator-responsive enteropathy (IRE), and nonresponsive enteropathy (NRE) based on response to therapy(ies). Reassessment of initial categorization (especially IRE and NRE) is lacking., Objectives: Investigate validity of categorization scheme when reassessed at least 1 year after diagnosis., Animals: Sixty client-owned dogs with CIE., Methods: Retrospective study. Clinical information was gathered from records and owners from time of diagnosis (T D ), time of initial response (T IR ), and at least 1 year after diagnosis (T ≥1y ). Category change was defined as a switch between groups., Results: Median disease activity index (CIBDAI) at T D was 9 and reduced significantly to 1 at T ≥1y (P < .0001). At T IR , dogs were categorized as: FRE 27/60 (45%, 95% binomial confidence intervals [CI], 0.32-0.58), IRE 30/60 (50%, CI 0.37-0.63), ARE 0/60 (0%), NRE 3/60 (5%, CI -0.01 to 0.11). Seventeen of 27 (63%) FRE dogs had previously had at least 1 unsuccessful diet trial. At T ≥1y , categorization changed to FRE 44/60 (73%, CI 0.62-0.85), IRE 14/60 (23%, CI 0.13-0.34), ARE 0/60 (0%), NRE 2/60 (3%, CI -0.01 to 0.08). Group changes were found for 24/60 (40%) dogs, largest change was from IRE to FRE (19/24, 79%). Immunosuppressive dosages were administered as sole treatment in 1/30 (3%) IRE dogs at T IR ., Conclusions and Clinical Importance: Chronic inflammatory enteropathy categorization based on initial response to therapy needs reassessment after 1 year. Frequent change from IRE to FRE suggests that dogs initially categorized as IRE might have been initially categorized as FRE if multiple dietary trials had been performed. In our study, antibiotics were not needed to achieve satisfying clinical responses., (© 2024 The Author(s). Journal of Veterinary Internal Medicine published by Wiley Periodicals LLC on behalf of American College of Veterinary Internal Medicine.)

Purpose: The aim of this study was to analyse sex-specific differences contributing to dynamic valgus in competitive soccer players before and after a standardised fatiguing protocol., Methods: Thirty-nine healthy female and male competitive soccer players (19 females and 20 males) were recruited for the purpose of this study. Bilateral medial knee displacement (MKD) was assessed during drop jump landings using a three-dimensional motion capture system before and after a standardised fatiguing protocol. In addition, all soccer players underwent clinical examinations, including rotational hip range of motion (ROM), isokinetic strength testing and magnetic resonance imaging (MRI) of the hip and knee. Sex-specific and fatigue-dependent differences were reported, and the influence of demographic, clinical and radiographic factors on MKD was analysed via multiple linear regression models., Results: Compared with male soccer players, female soccer players demonstrated a tendency towards increased MKD during drop jump landings before (p = 0.09) and after the fatiguing protocol (p = 0.04). Sex-specific differences included increased hip internal rotation (IR) ROM, decreased hip external rotation (ER) strength and increased femoral torsion in females (all p < 0.002). According to the multiple linear regression models (stepwise method), increased hip IR ROM (90° of flexion) and the non-dominant leg remained the sole independent predictors of increased MKD during drop jump landings before (p < 0.01 and p = 0.02, respectively) and after fatigue (p < 0.01 and p < 0.01, respectively). An increase in hip IR ROM in females was linearly related to MKD after fatigue (R 2  = 0.25; p < 0.01)., Conclusion: Female soccer players exhibited increased dynamic valgus before and after fatigue, which is likely attributed to joint mobility, as well as muscular and anatomical differences, such as increased hip IR ROM, reduced hip ER strength and increased femoral torsion. In particular, females with increased hip IR ROM were more susceptible to effects of fatigue on MKD, which may increase their risk for anterior cruciate ligament injury., Level of Evidence: Level III., (© 2024 The Author(s).Knee Surgery, Sports Traumatology, Arthroscopy published by John Wiley & Sons Ltd on behalf of European Society of Sports Traumatology, Knee Surgery and Arthroscopy.)

Corrective osteotomy allows to improve joint loading, pain and function. In complex deformities, the biggest challenge is to define the optimal surgical solution, while considering anatomical, technical and biomechanical factors. While the single-cut osteotomy (SCOT) and focal dome osteotomy (FDO) are well-established treatment options, their mathematical relationship remain largely unclear. The aim of the study was (1) to describe the close mathematical relationship between the SCOT and FDO and (2) to analyze and introduce a novel technique-the stepped FDO-as a modification of the classic FDO. The mathematical background and relationship of SCOT and FDO are described for the example of a femoral deformity correction and visualized using a 3D surface model taking into account the benefits for the clinical application. The novel modifications of the stepped FDO are introduced and its technical and clinical feasibility demonstrated. Both, SCOT and FDO, rely on the same deformity axis that defines the rotation axis k for a 3D deformity correction. To achieve the desired correction using a SCOT, the resulting cutting plane is perpendicular to k, while using a FDO will result in a cylindrical cut with a central axis parallel to k. The SCOT and FDO demonstrate a strong mathematical relation, as both methods rely on the same deformity axis, however, resulting in different cutting planes. These characteristics enable a complementary use when defining the optimal type of osteotomy. This understanding enables a more versatile planning approach when considering factors as the surgical approach, biomechanical characteristics of fixation or soft tissue conditions. The newly introduced stepped FDO facilitates an exact reduction of the bone fragments and potentially expands the clinical applicability of the FDO., (© 2024. The Author(s).)

Background: The use of 3D planning to guide corrective osteotomies of the lower extremity is increasing in clinical practice. The use of computer-tomography (CT) data acquired in supine position neglects the weight-bearing (WB) state and the gold standard in 3D planning involves the manual adaption of the surgical plan after considering the WB state in long-leg radiographs (LLR). However, this process is subjective and dependent on the surgeons experience. A more standardized and automated method could reduce variability and decrease costs., Purpose: The aim of the study was (1) to compare three different three-dimensional (3D) planning modalities for medial open-wedge high tibial osteotomy (MOWHTO) and (2) to describe the current practice of adapting NWB CT data after considering the WB state in LLR. The purpose of this study is to validate a new, standardized approach to include the WB state into the 3D planning and to compare this method against the current gold standard of 3D planning. Our hypothesis is that the correction is comparable to the gold standard, but shows less variability due compared to the more subjective hybrid approach., Methods: Three surgical planning modalities were retrospectively analyzed in 43 legs scheduled for MOWHTO between 2015 and 2019. The planning modalities included: (1) 3D hybrid (3D non-weight-bearing (NWB) CT models after manual adaption of the opening angle considering the WB state in LLR, (2) 3D NWB (3D NWB CT models) and (3) 3D WB (2D/3D registration of 3D NWB CT models onto LLR to simulate the WB state). The pre- and postoperative hip-knee-ankle angle (HKA) and the planned opening angle (°) were assessed and differences among modalities reported. The relationship between the reported differences and BMI, preoperative HKA (LLR), medial meniscus extrusion, Outerbridge osteoarthritis grade and joint line convergence angle (JLCA) was analyzed., Results: The mean (std) planned opening angle of 3D hybrid did not differ between 3D hybrid and 3D WB (0.4 ± 2.1°) (n.s.) but was higher in 3D hybrid compared to 3D NWB (1.1° ± 1.1°) (p = 0.039). 3D WB demonstrated increased preoperative varus deformity compared to 3D NWB: 6.7 ± 3.8° vs. 5.6 ± 2.7° (p = 0.029). Patients with an increased varus deformity in 3D WB compared to 3D NWB (> 2 °) demonstrated more extensive varus alignment in LLR (p = 0.009) and a higher JLCA (p = 0.013)., Conclusion: Small intermodal differences between the current practice of the reported 3D hybrid planning modality and a 3D WB approach using a 2D/3D registration algorithm were reported. In contrast, neglecting the WB state underestimates preoperative varus deformity and results in a smaller planned opening angle. This leads to potential under correction in MOWHTO, especially in patients with extensive varus deformities or JLCA., Clinical Relevance: Incorporating the WB state in 3D planning modalities has the potential to increase accuracy and lead to a more consistent and reliable planning in MOWHTO. The inclusion of the WB state in automatized surgical planning algorithms has the potential to reduce costs and time in the future., (© 2024. The Author(s).)

Background: Several demographic and clinical risk factors for recurrent ankle instability have been described. The main objective of this study was to investigate the potential influence of morphologic characteristics of the ankle joint on the occurrence of recurrent instability and the functional outcomes following a modified Broström-Gould procedure for chronic lateral ankle instability., Methods: Fifty-eight ankles from 58 patients (28 males and 30 females) undergoing a modified Broström-Gould procedure for chronic lateral ankle instability between January 2014 and July 2021 were available for clinical and radiological evaluation. Based on the preoperative radiographs, the following radiographic parameters were measured: talar width (TW), tibial anterior surface (TAS) angle, talar height (TH), talar radius (TR), tibiotalar sector (TTS), and tibial lateral surface (TLS) angle. The history of recurrent ankle instability and the functional outcome using the Karlsson Score were assessed after a minimum follow-up of 2 years., Results: Recurrent ankle instability was reported in 14 patients (24%). The TTS was significantly lower in patients with recurrent ankle instability (69.8 degrees vs 79.3 degrees) ( P  < .00001). The multivariate logistic regression model confirmed the TTS as an independent risk factor for recurrent ankle instability (OR = 1.64) ( P  = .003). The receiver operating characteristic curve analysis revealed that patients with a TTS lower than 72 degrees (=low-TTS group) had an 82-fold increased risk for recurrent ankle instability ( P  = .001). The low-TTS group showed a significantly higher rate of recurrent instability (58% vs 8%; P  = .0001) and a significantly lower Karlsson score (65 points vs 85 points; P  < .00001)., Conclusion: A smaller TTS was found to be an independent risk factor for recurrent ankle instability and led to poorer functional outcomes after a modified Broström-Gould procedure., Level of Evidence: Level IV, retrospective cohort study., Competing Interests: Declaration of Conflicting InterestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article. Disclosure forms for all authors are available online.

Three-dimensional (3D) deformity assessment and leg realignment planning is emerging. The aim of this study was to (1) validate a novel 3D planning modality that incorporates the weight-bearing (WB) state (3D WB) by comparing it to existing modalities (3D non-weight-bearing (NWB), 2D WB) and (2) evaluate the influence of the modality (2D vs. 3D) and the WB condition on the measurements. Three different planning and deformity measurement protocols were analyzed in 19 legs that underwent medial open-wedge high tibial osteotomy (HTO): (1) a 3D WB protocol, after 2D/3D registration of 3D CT models onto the long-leg radiograph (LLR) (3D WB), (2) a 3D NWB protocol based on the 3D surface models obtained in the supine position (3D NWB), and (3) a 2D WB protocol based on the LLR (2D WB). The hip-knee-ankle angle (HKA), joint line convergence angle (JLCA), and the achieved surgical correction were measured for each modality and patient. All the measurement protocols demonstrated excellent intermodal agreement for the achieved surgical correction, with an ICC of 0.90 (95% CI: 0.76-0.96)) ( p < 0.001). Surgical correction had a higher mean absolute difference compared to the 3D opening angle (OA) when measured with the WB protocols (3D WB: 2.7 ± 1.8°, 3D NWB: 1.9 ± 1.3°, 2D WB: 2.2 ± 1.3°), but it did not show statistical significance. The novel planning modality (3D WB) demonstrated excellent agreement when measuring the surgical correction after HTO compared to existing modalities.

Purpose: The goal of this study is (1) to assess differences between two-dimensional (2D) weight-bearing (WB) and three-dimensional (3D) nonweight-bearing (NWB) planning in total knee arthroplasty (TKA) and (2) to identify factors that influence intermodal differences., Methods: Retrospective single-centre analysis of patients planned for a TKA with patient-specific instruments (PSI). Preoperative WB long-leg radiographs and NWB computed tomography were analysed and following radiographic parameters included: hip-knee-ankle angle (HKA) (+varus/-valgus), joint line convergence angle (JLCA), femorotibial subluxation and bony defect classified according to Anderson. Preoperative range of motion was also considered as possible covariate. Demographic factors included age, sex, and body mass index., Results: A total of 352 knees of 323 patients (66% females) with a mean age of 66 ± 9.7 years were analysed. The HKA differed significantly between 2D and 3D planning modalities; varus knees ( n  = 231): 9.9° ± 5.1° vs. 6.7° ± 4°, p  < 0.001; valgus knees ( n  = 121): -8.2° ± 6° vs. -5.5° ± 4.4°, p  < 0.001. In varus knees, HKA ( β  = 0.38; p  < 0.0001) and JLCA ( β  = 0.14; p  = 0.03) were associated with increasing difference between 2D/3D HKA. For valgus knees, HKA ( β  = -0.6; p  < 0.0001), JLCA ( β  = -0.3; p  = 0.0001) and lateral distal femoral angle ( β  = -0.28; p  = 0.03) showed a significant influence on the mean absolute difference., Conclusion: The coronal alignment in preoperative 3D model for PSI-TKA significantly differed from 2D WB state and the difference between modalities correlated with the extent of varus/valgus deformity. In the vast majority of cases, the 3D NWB approach significantly underestimated the preoperative deformity, which needs to be considered to achieve the planned correction when using PSI in TKA., Level of Evidence: Level III., Competing Interests: Sandro F. Fucentese is a consultant for Medacta SA (Switzerland), Smith & Nephew (United Kingdom), Zimmer Biomet and Karl Storz SE & Co. KG (Germany). The other authors have no conflict of interest to declare., (© 2024 The Author(s). Journal of Experimental Orthopaedics published by John Wiley & Sons Ltd on behalf of European Society of Sports Traumatology, Knee Surgery and Arthroscopy.)

3D preoperative planning for high tibial osteotomies (HTO) has increasingly replaced 2D planning but is complex, time-consuming and therefore expensive. Several interdependent clinical objectives and constraints have to be considered, which often requires multiple rounds of revisions between surgeons and biomedical engineers. We therefore developed an automated preoperative planning pipeline, which takes imaging data as an input to generate a ready-to-use, patient-specific planning solution. Deep-learning based segmentation and landmark localization was used to enable the fully automated 3D lower limb deformity assessment. A 2D-3D registration algorithm allowed the transformation of the 3D bone models into the weight-bearing state. Finally, an optimization framework was implemented to generate ready-to use preoperative plannings in a fully automated fashion, using a genetic algorithm to solve the multi-objective optimization (MOO) problem based on several clinical requirements and constraints. The entire pipeline was evaluated on a large clinical dataset of 53 patient cases who previously underwent a medial opening-wedge HTO. The pipeline was used to automatically generate preoperative solutions for these patients. Five experts blindly compared the automatically generated solutions to the previously generated manual plannings. The overall mean rating for the algorithm-generated solutions was better than for the manual solutions. In 90% of all comparisons, they were considered to be equally good or better than the manual solution. The combined use of deep learning approaches, registration methods and MOO can reliably produce ready-to-use preoperative solutions that significantly reduce human workload and related health costs.

Introduction: The relationship between anterior pelvic tilt and overall sagittal alignment has been well-described previously. However, the relationship between pelvic tilt, frontal, and axial leg alignment remains unclear. The aim of the study was to analyze the relationship between pelvic tilt and frontal and axial leg alignment in healthy subjects., Material and Methods: Thirty healthy subjects (60 legs) without prior surgery underwent standing biplanar long leg radiograph. Pelvic parameters (pelvic tilt, pelvic incidence, sacral slope), hip-knee-ankle angle (HKA), femoral antetorsion and tibial torsion were measured using SterEOS (EOS Imaging) software. EOS was acquired with the feet directing straight anteriorly, which corresponds to a neutral foot progression angle (FPA). The influence of HKA, femoral antetorsion, tibial torsion and gender on pelvic tilt was analyzed in a univariate correlation and multiple regression model., Results: Sixteen female subjects and 14 male subjects with a mean age of 27.1 years ± 10 (range 20-67) were included. HKA, femoral antetorsion, and tibial torsion correlated with anterior pelvic tilt in univariate analysis (all p < 0.05). Anterior pelvic tilt increased 1.1° (95% CI: 0.7 to 1.5) per 1° of knee valgus (p < 0.001) and 0.5° (95% CI: 0.3 to 0.7) per 1° of external tibial torsion (p < 0.001). Overall, linear regression model fit explained 39% of variance in pelvic tilt by the HKA, femoral antetorsion and tibial torsion (R 2  = 0.385; p < 0.001)., Conclusion: Valgus alignment and increasing tibial torsion demonstrated a weak correlation with an increase in anterior pelvic tilt in healthy subjects when placing their feet anteriorly. The relationship between frontal, axial leg alignment and pelvic tilt needs to be considered in patients with multiple joint disorders at the hip, knee and spine. Alteration of the frontal, or rotational profile after realignment surgery or by implant positioning might influence the pelvic tilt when the FPA is kept constant., Competing Interests: Declaration of competing interest One of the author's is a consultant for Medacta SA (Switzerland), Smith & Nephew (United Kingdom), Zimmer Biomet and Karl Storz SE & Co. KG (Germany). The research is supported by the institutional research fund of the author's affiliated hospital., (Copyright © 2022 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.)

Background: In patients with osteochondral lesion, defects of the medial talus, or failed cartilage surgery, a periarticular osteotomy can unload the medial compartment., Purpose: To compare the effects of supramalleolar osteotomy (SMOT) versus sliding calcaneal osteotomy (SCO) for pressure redistribution and unloading of the medial ankle joint in normal, varus-aligned, and valgus-aligned distal tibiae., Study Design: Controlled laboratory study., Methods: Included were 8 cadaveric lower legs with verified neutral ankle alignment (lateral distal tibial angle [LDTA] = 0°) and hindfoot valgus within normal range (0°-10°). SMOT was performed to modify LDTA between 5° valgus, neutral, and 5° varus. In addition, a 10-mm lateral SCO was performed and tested in each position in random order. Axial loading (700 N) of the tibia was applied with the foot in neutral alignment in a customized testing frame. Pressure distribution in the ankle joint and subtalar joint, center of force, and contact area were recorded using high-resolution Tekscan pressure sensors., Results: At neutral tibial alignment, SCO unloaded the medial joint by a mean of 10% ± 10% or 66 ± 51 N ( P = .04) compared with 6% ± 12% or 55 ± 72 N with SMOT to 5° valgus ( P = .12). The achieved deload was not significantly different (ns) between techniques. In ankles with 5° varus alignment at baseline, SMOT to correct LDTA to neutral insufficiently addressed pressure redistribution and increased medial load by 6% ± 9% or 34 ± 33 N (ns). LDTA correction to 5° valgus (10° SMOT) unloaded the medial joint by 0.4% ± 14% or 20 ± 75 N (ns) compared with 9% ± 11% or 36 ± 45 N with SCO (ns). SCO was significantly superior to 5° SMOT ( P = .017) but not 10° SMOT. The subtalar joint was affected by both SCO and SMOT, where SCO unloaded but SMOT loaded the medial side., Conclusion: SCO reliably unloaded the medial compartment of the ankle joint for a neutral tibial axis. Changes in the LDTA by SMOT did not positively affect load distribution, especially in varus alignment. The subtalar joint was affected by SCO and SMOT in opposite ways, which should be considered in the treatment algorithm., Clinical Relevance: SCO may be considered a reliable option for beneficial load-shifting in ankles with neutral alignment or 5° varus malalignment., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: The study was funded by Balgrist University Hospital and Balgrist Campus and the Swiss Center for Musculoskeletal Imaging, SCMI, Balgrist Campus AG, Zürich, Switzerland. AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto., (© The Author(s) 2023.)

Purpose: Over the last years, interest and efforts to implement augmented reality (AR) in orthopedic surgery through head-mounted devices (HMD) have increased. However, the majority of experiments were preclinical and within a controlled laboratory environment. The operating room (OR) is a more challenging environment with various confounding factors potentially affecting the performance of an AR-HMD. The aim of this study was to assess the performance of an AR-HMD in a real-life OR setting., Methods: An established AR application using the HoloLens 2 HMD was tested in an OR and in a laboratory by two users. The accuracy of the hologram overlay, the time to complete the trial, the number of rejected registration attempts, the delay in live overlay of the hologram, and the number of completely failed runs were recorded. Further, different OR setting parameters (light condition, setting up partitions, movement of personnel, and anchor placement) were modified and compared., Results: Time for full registration was higher with 48 s (IQR 24 s) in the OR versus 33 s (IQR 10 s) in the laboratory setting (p < 0.001). The other investigated parameters didn't differ significantly if an optimal OR setting was used. Within the OR, the strongest influence on performance of the AR-HMD was different light conditions with direct light illumination on the situs being the least favorable., Conclusion: AR-HMDs are affected by different OR setups. Standardization measures for better AR-HMD performance include avoiding direct light illumination on the situs, setting up partitions, and minimizing the movement of personnel., (© 2023. The Author(s).)

Introduction: Acromioclavicular joint dislocations (ACD) are one of the most common shoulder injuries. There is no consensus in how to treat higher graded ACD ≥ Rockwood grade III. This study compares operative versus conservative treatment regarding costs and clinical outcome parameters., Materials and Methods: This retrospective, consecutive case-control-study includes 14 patients. Seven operatively treated patients were matched, by Rockwood grade, with seven conservatively treated patients. The cost was extracted out of the clinical- and insurance-based cost sheets and furthermore these include the loss of earnings. Clinical examination, demographic data as well as different outcome-questionnaires were recorded., Results: There were no significant differences between operative and conservative treated patients for outcome Questionnaires. Of note, there was a significantly higher incidence of tenderness over the AC-joint (p = 0.0038) postoperatively. As expected, economical evaluation showed various findings in favor of the conservative treatment. The costs for medical services (11012.39vs.1163.81USD; p = 0.0061), days of hospitalization (3.3vs.0days; p < 0.0001); total cost for medical treatment (30262.17 vs. 7833.82 USD; p = 0.0358) were significantly higher in the operative group., Conclusion: Even with a limited case number and a retrospective study design almost all clinical results were equal in both groups. Operative therapy of higher graded ACDs (Rockwood > III) compared to conservative is economically inefficient. Under consideration of clinical comparable results, indications for operative treatment should be set very carefully., (© 2023. BioMed Central Ltd., part of Springer Nature.)

Purpose: Recent data suggest that individual morphologic factors should be respected to restore preoperative patellofemoral alignment and thus reduce the likelihood of anterior knee pain. The goal of this study was to investigate the effect of excessive femoral torsion (FT) on clinical outcome of TKA., Methods: Patients who underwent TKA and complete preoperative radiographic evaluation including a long-leg radiograph and CT scan were included. 51 patients showed increased FT of > 20° and were matched for age/sex to 51 controls (FT < 20°). Thirteen patients were lost to follow-up. Thirty-eight matched pairs were compared after a 2 year follow-up clinically (Kujala and patellofemoral score for TKA) and radiographically (FT, frontal leg axis, TT-TG, patellar thickness, patellar tilt, and lateral displacement of patella). Functional alignment of TKA was performed (hybrid-technique). All patellae were denervated but no patella was resurfaced., Results: There was no significant difference between clinical scores two years after surgery between patients with normal and excessive FT (n.s.). Kujala score was 64.3 ± 16.7 versus 64.8 ± 14.4 (n.s.), and patellofemoral score for TKA was 74.3 ± 21 versus 78.5 ± 20.7 (n.s.) for increased FT group and control group, respectively. There was no correlation between preoperative FT and clinical scores. Other radiographic parameters were similar between both groups. No correlations between clinical outcomes and preoperative/postoperative frontal leg axis or total leg axis correction were found (n.s.)., Conclusion: If the leg axis deformity is corrected to a roughly neutral alignment during cemented TKA, including patellar denervation, then excessive FT was not associated with patellofemoral pain or instability., Level of Evidence: Prospective comparative study, level II., (© 2022. The Author(s).)

Background: Bone tunnel enlargement after single-bundle anterior cruciate ligament reconstruction remains an unsolved problem that complicates revision surgery., Hypothesis: Positioning of an osteoconductive scaffold at the femoral tunnel aperture improves graft-to-bone incorporation and thereby decreases bone tunnel widening., Study Design: Randomized controlled trial; Level of evidence, 1., Methods: In a 1:1 ratio, 56 patients undergoing primary anterior cruciate ligament reconstruction were randomized to receive femoral fixation with cortical suspension fixation and secondary press-fit fixation at the tunnel aperture of the tendon graft only (control) or with augmentation by an osteoconductive scaffold (intervention). Adverse events, patient-reported outcomes, and passive knee stability were recorded over 2 years after the index surgery. Three-dimensional bone tunnel widening was assessed using computed tomography at the time of surgery and 4.5 months and 1 year postoperatively., Results: The intervention group exhibited a similar number of adverse events as the control group (8 vs 10; P = .775) including 2 partial reruptures in both groups. The approach was feasible, although 1 case was encountered where the osteoconductive scaffold was malpositioned without adversely affecting the patient's recovery. There was no difference between the intervention and control groups in femoral bone tunnel enlargement, as expressed by the relative change in tunnel volume from surgery to 4.5 months (mean ± SD, 36% ± 25% vs 40% ± 25%; P = .644) and 1 year (19% ± 20% vs 17% ± 25%; P =.698)., Conclusion: Press-fit graft fixation with an osteoconductive scaffold positioned at the femoral tunnel aperture is safe but does not decrease femoral bone tunnel enlargement at postoperative 1 year., Registration: NCT03462823 (ClinicalTrials.gov identifier)., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: Funding was provided by the Swiss Innovation Agency (grant 25382.2 PFLS-LS-1). T.G., E.B., X.L., and J.G.S. are coinventors of a patent on the tested device (BTB-Converter), filed by ZuriMED Technologies; E.B. and X.L. are employed by ZuriMED Technologies; and E.B., X.L., and J.G.S. are shareholders in ZuriMED Technologies. S.F.F. has received consulting fees from Medacta, Zimmer Biomet, Smith & Nephew, and Storz. AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto., (© The Author(s) 2023.)

Purpose: The impact of posterolateral tibial plateau impaction fractures (TPIF) on posttraumatic knee stability in the setting of primary anterior cruciate ligament (ACL) tear is unknown. The main objective was to determine whether increased bone loss of the posterolateral tibial plateau is associated with residual rotational instability and impaired functional outcome after ACL reconstruction., Methods: A cohort was identified in a prospective enrolled study of patients suffering acute ACL injury who underwent preoperative standard radiographic diagnostics and clinical evaluation. Patients were included when scheduled for isolated single-bundle hamstring autograft ACL reconstruction. Exclusion criteria were concurrent anterolateral complex (ALC) reconstruction (anterolateral tenodesis), previous surgery or symptoms in the affected knee, partial ACL tear, multi-ligament injury with an indication for additional surgical intervention, and extensive cartilage wear. On MRI, bony (TPIF, tibial plateau, and femoral condyle morphology) and ligament status (ALC, concomitant collateral ligament, and meniscus injuries) were assessed by a musculoskeletal radiologist. Clinical evaluation consisted of KT-1000, pivot-shift, and Lachman testing, as well as Tegner activity and IKDC scores., Results: Fifty-eight patients were included with a minimum follow-up of 12 months. TPIF was identified in 85% of ACL injuries (n = 49). The ALC was found to be injured in 31 of 58 (53.4%) cases. Pearson analysis showed a positive correlation between TPIF and the degree of concomitant ALC injury (p < 0.001). Multiple regression analysis revealed an increased association of high-grade TPIF with increased lateral tibial convexity (p = 0.010). The high-grade TPIF group showed worse postoperative Tegner scores 12 months postoperatively (p = 0.035)., Conclusion: Higher degrees of TPIFs are suggestive of a combined ACL/ALC injury. Moreover, patients with increased posterolateral tibial plateau bone loss showed lower Tegner activity scores 12 months after ACL reconstruction., Level of Evidence: III., (© 2022. The Author(s).)

Background: The relationship between functional femoral antetorsion, the greater trochanter (GT) position and anatomical antetorsion has been demonstrated in patients with a primary hip pathology. However, the functional antetorsion and GT position have not been analyzed in patellofemoral dysplastic knees. The aim of this study was to develop a three-dimensional (3D) measurement to quantify the functional femoral antetorsion and position of the GT and to analyze these measurements in a cohort of high-grade patellofemoral dysplastic knees., Method: A 3D measurement was developed to analyze functional antetorsion and the axial position of the GT and assessed in 100 cadaveric femora. For validity and repeatability testing, inter- and intra-observer reliability were determined using intraclass correlation coefficients (ICCs). These measurements were then evaluated in a cohort of 19 high-grade patellofemoral dysplastic knees (Dejour type C, D). The relationship between anatomical antetorsion, functional antetorsion and GT position were reported., Results: Inter- and intra-reader reliability for 3D functional antetorsion and axial position of the GT demonstrated a minimum ICC of 0.96 (P < 0.001). Anatomical and functional antetorsion demonstrated a highly linear relationship (R 2  = 0.878; P < 0.001) in high-grade patellofemoral dysplastic knees. The mean difference between anatomical and functional antetorsion decreased with increasing anatomical antetorsion (R 2  = 0.25; P = 0.031, indicating a more anterior position of the GT relative to the femoral neck axis., Conclusion: In high-grade patellofemoral dysplastic knees, the GT is located more anteriorly, relative to the femoral neck axis, with increasing anatomical antetorsion and correction osteotomy may result in an excessively anterior position of the GT., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: S.F. is a consultant for Medacta SA (Switzerland), Smith & Nephew (UK) and Karl Storz SE & Co. KG (Germany)., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Purpose: Medial open wedge high tibial osteotomy (MOWHTO) is an effective treatment option for realignment of a varus knee. However, a simple supra-tuberositary osteotomy can lead to patella baja and potentially increases the tibial tuberosity-trochlear groove distance (TTTG). The purpose of this study was to quantify the influence of MOWHTO on TTTG., Methods: Three-dimensional (3D) surface models of five lower extremities with a varus hip-knee-ankle angle (HKA) and a borderline TTTG (≥ 15 mm), five lower extremities with a varus HKA and a normal TTTG (< 15 mm) and a 3D statistical shape model (SSM) of a neutrally aligned healthy knee were analysed by simulating MOWHTO with a stepwise increment of one degree of valgisation from the preoperative coronal deformity (0°-15°) for each patient, resulting in a total of 165 simulations. Postoperative 3D TTTG and tibial torsion (TT) were measured for each simulation. A mathematical formula was developed to calculate the increase of TTTG after MOWHTO. Mean differences between simulated and calculated TTTG were analysed., Results: Mean preoperative HKA was 6.5 ± 3.0° varus (range 0.8°-11.5°). Mean TTTG increased from 14.2 ± 3.2 mm (range 9.6-19.1) preoperatively to 18.8 ± 3.8 mm (range 14.5-25.0) postoperatively (p = 0.001). TTTG increased approximately linear by + 0.5 ± 0.2° (range 0.3-0.8) per 1° of valgisation with a high positive correlation (0.99, p = 0.001) from 0° to 15°. Mean difference between simulated and calculated TTTG was 0.03 ± 0.02 mm (range 0.01-0.07) per 1° of valgisation (p < 0.001)., Conclusion: MOWHTO results in an approximately linear increase in TTTG of + 0.5 mm per 1° of valgisation in the range from 0° to 15° and the lateralisation of the tibial tuberosity can be calculated reliably using the described formula. Preoperative analysis of TTTG in patients undergoing MOWHTO may prevent unintentional patellofemoral malalignment., Level of Evidence: III., (© 2021. European Society of Sports Traumatology, Knee Surgery, Arthroscopy (ESSKA).)

Purpose: High-grade patellofemoral dysplasia is often associated with concomitant axial and frontal leg malalignment. However, curvature of the femur and sagittal flexion of the trochlea has not yet been studied in patellofemoral dysplastic knees. The aim of the study was to quantify the femoral curvature and sagittal flexion of the trochlea in both high-grade patellofemoral dysplastic and healthy knees., Methods: A retrospective case-control study matched 19 high-grade patellofemoral dysplastic knees (Dejour types C and D) with 19 healthy knees according to sex and body mass index. Three-dimensional (3D) femoral curvature and sagittal trochlea flexion were analysed. To analyse femoral curvature, the specific 3D radius of curvature (ROC) was calculated. Trochlear flexion was quantified through the development of the trochlea flexion angle (TFA), which is a novel 3D measurement in relation to the anatomical and mechanical femur axis and is referred to as 3D TFA anatomic and 3D TFA mech . The influence of age, gender, height, weight and frontal and axial alignment on ROC and TFA was analysed in a multiple regression model., Results: Overall ROC was significantly smaller in dysplastic knees, compared with the control group [898.4 ± 210.8 mm (range 452.9-1275.1 mm) vs 1308.4 ± 380.5 mm (range 878.3-2315.8 mm), p < 0.001]. TFA was significantly higher in dysplastic knees, compared with the control group, for 3D TFA mech [13.8 ± 7.2° (range 4.4-33.4°) vs 6.5 ± 2.3° (range 0.8-10.2°), p < 0.001] and 3D TFA anatomic [12.5 ± 7.2° (range 3.1-32.2°) vs 6.4 ± 1.9° (range 2.1-9.1°), p = 0.001]. A smaller ROC was associated with smaller height, female gender and higher femoral ante torsion. An increased TFA was associated with valgus malalignment., Conclusion: High-grade patellofemoral dysplastic knees demonstrated increased femoral curvature and sagittal flexion of the trochlea, compared with healthy knees. The ROC and newly described TFA allowed the quantification of the sagittal femoral deformity. TFA and ROC should be incorporated in future deformity analysis to investigate their potential as a target for surgical correction., Level of Evidence: Level III., (© 2022. The Author(s) under exclusive licence to European Society of Sports Traumatology, Knee Surgery, Arthroscopy (ESSKA).)

Background Context: Hyperextension orthoses (HOs) for nonoperative treatment of osteoporotic vertebral fractures (OVFs) are widely prescribed. However, the compliance, how much an HO is worn after it has been prescribed, is widely unknown., Purpose: This study was performed to assess the wearing time of HOs for OVFs in a prospective blinded, sensor-controlled manner., Study Design / Setting: A prospective, single blinded observational study was performed., Patient Sample: This study prospectively included 18 patients who were treated nonoperatively with an HO for OVFs., Outcome Measures: The true wearing time was measured using a hidden temperature-based sensor. The patients were invited to return for regular follow-up every 2 weeks for 6 weeks, at which time clinical evaluation (including a visual analog scale for pain and the Oswestry disability questionnaire) and radiographs of the spine were performed., Methods: Full compliance was defined as a wearing time of 15 hours per day. Correlation between compliance and demographic differences, patient reported outcomes and radiographic changes of the vertebral structures were calculated., Results: The mean HO wearing time was 5.5±3.3 hours (37%±22% compliance). Female patients used the HO significantly longer per day than did male patients (6.5±3.2 vs 2.9±2.0 hours, p=.039). Age and body mass index had no influence on wearing behavior., Conclusions: Overall, compliance with wearing HOs is poor and shows great variability with significant gender-dependency but not associated with BMI, age, or pain-level. Further studies are required to confirm our results that the wearing time does not have an influence on kyphotic progression of the osteoporotic fractured segment, nor on clinical outcome at short term., Level of Evidence: I., Competing Interests: Declaration of competing interest One or more of the authors declare financial or professional relationships on ICMJE-TSJ disclosure forms., (Copyright © 2022 The Author(s). Published by Elsevier Inc. All rights reserved.)

Purpose: The purpose of this study was to investigate if one level of corrective femoral osteotomy (subtrochanteric or supracondylar) bears an increased risk of unintentional implications on frontal and sagittal plane alignment in a simulated clinical setting., Methods: Out of 100 cadaveric femora, 23 three-dimensional (3-D) surface models with femoral antetorsion (femAT) deformities (> 22° or < 2°) were investigated, and femAT normalized to 12° with single plane rotational osteotomies, perpendicular to the mechanical axis of the femur. Change of the frontal and sagittal plane alignment was expressed by the mechanical lateral distal femoral angle (mLDFA) and the posterior distal femoral angle (PDFA), respectively. The influence of morphologic factors of the femur [centrum-collum-diaphyseal (CCD) angle and antecurvatum radius (ACR)] were assessed. Furthermore, position changes of the lesser (LT) and greater trochanters (GT) in the frontal and sagittal plane compared to the hip centre were investigated., Results: Mean femoral derotation of the high-antetorsion group (n = 6) was 12.3° (range 10-17°). In the frontal plane, mLDFA changed a mean of 0.1° (- 0.06 to 0.3°) (n.s.) and - 0.3° (- 0.5 to - 0.1) (p = 0.03) after subtrochanteric and supracondylar osteotomy, respectively. In the sagittal plane, PDFA changed a mean of 1° (0.7 to 1.1) (p = 0.03) and 0.3° (0.1 to 0.7) (p = 0.03), respectively. The low-antetorsion group (n = 17) was rotated by a mean of 13.8° (10°-23°). mLDFA changed a mean of - 0.2° (- 0.5° to 0.2°) (p < 0.006) and 0.2° (0-0.5°) (p < 0.001) after subtrochanteric and supracondylar osteotomy, respectively. PDFA changed a mean of 1° (- 2.3 to 1.3) (p < 0.01) and 0.5° (- 1.9 to 0.3) (p < 0.01), respectively. The amount of femAT correction was associated with increased postoperative deviation of the mechanical leg axis (p < 0.01). Using multiple regression analysis, no other morphological factors were found to influence mLDFA or PDFA. Internal rotational osteotomies decreased the ischial-lesser trochanteric space by < 5 mm in both the frontal and sagittal plane (p < 0.001)., Conclusions: In case of femAT correction of ≤ 20°, neither subtrochanteric nor supracondylar femoral derotational or rotational osteotomies have a clinically relevant impact on frontal or sagittal leg alignment. A relevant deviation in the sagittal (but not frontal plane) might occur in case of a > 25° subtrochanteric femAT correction., Level of Evidence: IV., (© 2022. The Author(s) under exclusive licence to European Society of Sports Traumatology, Knee Surgery, Arthroscopy (ESSKA).)

Objective: Ankle joint line orientation (AJLO) is influenced by the subtalar foot and frontal leg alignment. However, the influence of axial leg alignment on AJLO remains unclear. The study aimed to analyze the influence of frontal, axial leg alignment on AJLO in healthy subjects., Methods: Thirty healthy subjects (60 legs) without prior surgery underwent standing biplanar long leg radiograph (LLR) between 2016 and 2020. AJLO was measured in standing long-leg radiographs relative to the ground. Meary's angle and calcaneal pitch were measured. Hip-knee-ankle angle (HKA), femoral antetorsion, and tibial torsion were assessed with SterEOS software (EOS Imaging, Paris, France). LLR was acquired with the feet directing straight anteriorly, which corresponds to a neutral foot progression angle (FPA). The influence of subtalar, frontal, and axial alignment on AJLO was analyzed in a multiple regression model., Results: An increase in knee valgus increased relative valgus AJLO by 0.5° (95% CI: 0.2° to 0.7°) per 1° (P < 0.001). A decrease in femoral antetorsion increased relative valgus AJLO by 0.2° (95% CI: 0.1° to 0.2°) per 1° (P < 0.001), whereas Meary's angle and calcaneal pitch did not influence AJLO., Conclusion: A link between frontal, axial leg alignment, and AJLO could be demonstrated, indicating that a valgus leg alignment and relative femoral retrotorsion are associated with an increase of valgus AJLO in healthy subjects when placing their feet in a neutral position. Alteration of the frontal, or rotational profile after realignment surgery or by implant positioning might influence the AJLO, when the FPA is kept constant., (© 2022 The Authors. Orthopaedic Surgery published by Tianjin Hospital and John Wiley & Sons Australia, Ltd.)

Purpose: In complex distal radius fractures (DRF), both direct osteosynthesis (one-stage approach) and temporary external fixation as a bridge to definitive osteosynthesis (two-stage approach) are used. Studies directly comparing these two management options are lacking. This study aims to compare the two procedures with regard to complications, and radiological and functional outcomes., Material: This prospective observational study included all patients presenting with AO OTA C2 or C3 DRF (1) between January 2011 and January 2018. All patients were categorised into two groups according to received treatment: patients who underwent direct definitive osteosynthesis (Group One Stage) and patients who received an external fixator followed by definitive fixation (Group Two Stage). Primary outcome was the Patient-Rated Wrist Evaluation score (PRWE) measured at 1 year follow-up. Secondary outcomes included complications, range of motion (ROM), and radiologic parameters (ulnar variance, radial inclination and volar tilt)., Results: A total of 187 patients were included in Group One Stage with a mean age of 55.6 years (SD 17.2), of which 67 had a C2 and 120 a C3 fracture. Group Two Stage consisted of 66 patients with a mean age of 53.7 years (SD 20.4 years), of which 6 patients having a C2 and 60 a C3 fracture. There was no significant difference in complications and median PRWE between Group One Stage (12.0, IQR 2.0-20.0) and Group Two Stage (12.2, IQR 5.5-23.4) (p = 0.189), even after correction for differences in baseline characteristics. The ROM and radiologic parameters did not show any significant differences as well., Conclusion: No differences were found in clinical, functional, and radiological outcome between one- and two-staged surgical techniques. It may be concluded that a two-stage approach is a viable and safe alternative., (© 2021. Springer-Verlag GmbH, DE part of Springer Nature.)

Background: Intra-articular malunions of the finger can lead to deformity and loss of function and can be treated with intra-articular corrective osteotomies. The aim of this study was to evaluate radiographic joint congruency, feasibility and functional outcome of three-dimensional (3D) printed patient-specific instrumentation (PSI) for corrective osteotomies at the trapeziometacarpal and finger joints., Methods: Computer-tomography (CT) scans were acquired preoperatively for standard 3D planning, which was followed by calculation of cutting planes and the design of individualized bone surface contact drilling, sawing and reposition guides. Follow-up CT scans and clinical examinations (range of motion, grip strength) were performed. Postoperative complications were documented and patient-reported outcome measurements were assessed (Single Assessment Numeric Evaluation (SANE) score, brief Michigan Hand Questionnaire (MHQ))., Results: Ten patients (mean age 28.4 ± 12.8,range 13.8-51.3) years) were included with a mean follow-up of 21 ± 18 (3-59) months including seven osteotomies at the trapeziometacarpal or metacarpophalangeal joints and three at the proximal interphalangeal joint (PIP). All radiographic follow-up examinations showed the planned correction with good joint congruency and regular osseous consolidation. At the latest follow-up, the range of motion (ROM) increased and the average grip strength recovered to the level of the contralateral side. No postoperative complication was detected. The mean SANE score improved from 44 ± 23 (0-70) to 82 ± 12 (60-90) after a mean of 72 ± 20 (44-114) months. The mean postoperative brief MHQ was 92 ± 8 (71-98)., Conclusion: The use of 3D PSI in treating intra-articular malunions at the trapeziometacarpal and finger joints restored articular congruency accurately. ROM and grip strength improved postoperatively comparable to the healthy contralateral side and patient-reported outcome measures improved after medium-term follow-up., (© 2022. The Author(s).)

Purpose: Rotation of the tibia relative to the femur was recently identified as a contributing risk factor for patellar instability, and correlated with its severity. The hypothesis was that in patellofemoral dysplastic knees, an increase in femorotibial rotation can be reliably detected on anteroposterior (AP) radiographs by an overlap of the lateral femoral condyle over the lateral tibial eminence., Methods: Sixty patients (77 knees) received low-dose computed tomography (CT) of the lower extremity for assessment of torsional malalignment due to recurrent patellofemoral instability. Three-dimensional (3D) surface models were created to assess femorotibial rotation and its relationship to other morphologic risk factors of patellofemoral instability. On weight-bearing AP knee radiographs, a femoral condyle/lateral tibial eminence superimposition was defined as a positive winking sign. Using digitally reconstructed radiographs of the 3D models, susceptibility of the winking sign to vertical/horizontal AP knee radiograph malrotation was investigated., Results: A positive winking sign was present in 30/77 knees (39.0%) and indicated a 6.3 ± 1.4° increase in femorotibial rotation (p < 0.001). Femoral condyle/tibial eminence superimposition of 1.9 mm detected an increased femorotibial rotation (> 15°) with 43% sensitivity and 90% specificity (AUC = 0.72; p = 0.002). A positive winking sign (with 2 mm overlap) disappeared in case of a 10° horizontally or 15° vertically malrotated radiograph, whereas a 4 mm overlap did not disappear at all, regardless of the quality of the radiograph. In absence of a winking sign, on the other hand, no superimposition resulted within 20° of vertical/horizontal image malrotation. Femorotibial rotation was positively correlated to TT-TG (R 2  = 0.40, p = 0.001) and patellar tilt (R 2  = 0.30, p = 0.001)., Conclusions: The winking sign reliably indicates an increased femorotibial rotation on a weight-bearing AP knee radiograph and could prove useful for day-by-day clinical work. Future research needs to investigate whether femorotibial rotation is not only a prognostic factor but a potential surgical target in patients with patellofemoral disorders., Level of Evidence: III., (© 2022. The Author(s).)

The modified "Lapidus" procedure (MLP) describes the arthrodesis of the first tarsometatarsal joint. We investigate if there are detectable changes of the tendon or the function of the muscle and clinical outcome after MLP. We reviewed 22 feet. All patients underwent magnetic resonance imaging (MRI) at an average of 27 (range, 12-49) months. Clinical outcome was evaluated using the European Foot and Ankle Society score. Strength was measured and complications were assessed. MRI revealed signs of tendinopathy of the tibialis anterior tendon in 13 feet (59%). The mean total European Foot and Ankle Society score at final follow-up was 17 (range, 6-24) points. The mean postoperative Visual Analog Scale score was 1.4 (range, 0-5). Range of motion and force data were not significantly different to the contralateral side. In conclusion, MRI showed signs of tendinopathy in 59%, which does not seem to affect clinical outcome, but has to be considered when choosing the desired implant and placement. MLP leads to high patient satisfaction rates and significant improvement at midterm follow up., (Copyright © 2022 the American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.)

An improved understanding of the relationships between bone morphology and in vivo tibio-femoral kinematics potentially enhances functional outcomes in patients with knee disorders. The aim of this study was to quantify the influence of femoral and tibial bony morphology on tibio-femoral kinematics throughout complete gait cycles in healthy subjects. Twenty-six volunteers underwent clinical examination, radiographic assessment, and dynamic video-fluoroscopy during level walking, downhill walking, and stair descent. Femoral computer-tomography (CT) measurements included medial condylar (MC) and lateral condylar (LC) width, MC and LC flexion circle, and lateral femoral condyle index (LFCI). Tibial CT measurements included both medial (MTP) and lateral tibial plateau (LTP) slopes, depths, lengths, and widths. The influence of bony morphology on tibial internal/external rotation and anteroposterior (AP)-translation of the lateral and medial compartments were analyzed in a multiple regression model. An increase in tibial internal/external rotation could be demonstrated with decreasing MC width β: -0.30 (95% CI: -0.58 to -0.03) ( p = 0.03) during the loaded stance phase of level walking. An increased lateral AP-translation occurred with both a smaller LC flexion circle β: -0.16 (95% CI: -0.28 to -0.05) ( p = 0.007) and a deeper MTP β: 0.90 (95% CI: 0.23 to 1.56) ( p = 0.01) during the loaded stance phase of level walking. The identified relationship between in vivo tibio-femoral kinematics and bone morphology supports a customized approach and individual assessment of these factors in patients with knee disorders and potentially enhances functional outcomes in anterior cruciate ligament injuries and total knee arthroplasty.

Aims: Preprint servers allow authors to publish full-text manuscripts or interim findings prior to undergoing peer review. Several preprint servers have extended their services to biological sciences, clinical research, and medicine. The purpose of this study was to systematically identify and analyze all articles related to Trauma & Orthopaedic (T&O) surgery published in five medical preprint servers, and to investigate the factors that influence the subsequent rate of publication in a peer-reviewed journal., Methods: All preprints covering T&O surgery were systematically searched in five medical preprint servers (medRxiv, OSF Preprints, Preprints.org, PeerJ, and Research Square) and subsequently identified after a minimum of 12 months by searching for the title, keywords, and corresponding author in Google Scholar, PubMed, Scopus, Embase, Cochrane, and the Web of Science. Subsequent publication of a work was defined as publication in a peer-reviewed indexed journal. The rate of publication and time to peer-reviewed publication were assessed. Differences in definitive publication rates of preprints according to geographical origin and level of evidence were analyzed., Results: The number of preprints increased from 2014 to 2020 (p < 0.001). A total of 38.6% of the identified preprints (n = 331) were published in a peer-reviewed indexed journal after a mean time of 8.7 months (SD 5.4 (1 to 27)). The highest proportion of missing subsequent publications was in the preprints originating from Africa, Asia/Middle East, and South America, or in those that covered clinical research with a lower level of evidence (p < 0.001)., Conclusion: Preprints are being published in increasing numbers in T&O surgery. Depending on the geographical origin and level of evidence, almost two-thirds of preprints are not subsequently published in a peer-reviewed indexed journal after one year. This raises major concerns regarding the dissemination and persistence of potentially wrong scientific work that bypasses peer review, and the orthopaedic community should discuss appropriate preventive measures.Cite this article: Bone Jt Open  2022;3(7):582-588.

Background: Safe and accurate execution of surgeries to date mainly rely on preoperative plans generated based on preoperative imaging. Frequent intraoperative interaction with such patient images during the intervention is needed, which is currently a cumbersome process given that such images are generally displayed on peripheral two-dimensional (2D) monitors and controlled through interface devices that are outside the sterile filed. This study proposes a new medical image control concept based on a Brain Computer Interface (BCI) that allows for hands-free and direct image manipulation without relying on gesture recognition methods or voice commands., Method: A software environment was designed for displaying three-dimensional (3D) patient images onto external monitors, with the functionality of hands-free image manipulation based on the user's brain signals detected by the BCI device (i.e., visually evoked signals). In a user study, ten orthopedic surgeons completed a series of standardized image manipulation tasks to navigate and locate predefined 3D points in a Computer Tomography (CT) image using the developed interface. Accuracy was assessed as the mean error between the predefined locations (ground truth) and the navigated locations by the surgeons. All surgeons rated the performance and potential intraoperative usability in a standardized survey using a five-point Likert scale (1 = strongly disagree to 5 = strongly agree)., Results: When using the developed interface, the mean image control error was 15.51 mm (SD: 9.57). The user's acceptance was rated with a Likert score of 4.07 (SD: 0.96) while the overall impressions of the interface was rated as 3.77 (SD: 1.02) by the users. We observed a significant correlation between the users' overall impression and the calibration score they achieved., Conclusions: The use of the developed BCI, that allowed for a purely brain-guided medical image control, yielded promising results, and showed its potential for future intraoperative applications. The major limitation to overcome was noted as the interaction delay., (© 2022. The Author(s).)

Background: Acromial and scapular spine fractures (ASFs) are known complications following implantation of reverse total shoulder arthroplasty (RTSA). The entity of acromial stress reaction (ASR) without fracture has recently been described. The purpose of this study was to analyze the incidence, radiographic predictors, treatment options, healing rates, and clinical outcomes of ASF and ASR compared with a control group., Methods: A total of 854 primary RTSAs were implanted between 2005 and 2018 in a single shoulder unit of a tertiary referral hospital and retrospectively reviewed for the incidence of ASF and ASR. ASR was defined as pain at the acromion or scapular spine after fracture exclusion on computed tomography scans. The ASF group was matched to a control group. Preoperative and postoperative radiographs were analyzed for radiographic predictors of ASF or ASR. The impact of ASF and ASR, operative vs. nonoperative treatment, and fracture union on clinical outcomes (Constant-Murley score [CS], Subjective Shoulder Value [SSV], and range of motion) with a minimum follow-up period of 2 years was analyzed., Results: A total of 46 ASFs (5.4%) in 44 patients and 44 ASRs (5.2%) in 43 patients were detected at a mean of 16 ± 24 months and 20 ± 23 months postoperatively, respectively. Predictive radiographic factors were an increased critical shoulder angle and lateralization shoulder angle. The overall union rate was 55% (22 of 40) but was significantly higher following operative treatment (9 of 11, 82%) compared with nonoperative treatment (13 of 29, 45%). Patients with ASF or ASR demonstrated inferior clinical outcomes (CS, 44 ± 21 and 48 ± 18; SSV, 52% ± 25% and 57% ± 27%) compared with the control group (CS, 66 ± 14; SSV, 82% ± 22%) independent of bony union or treatment at a mean of 59 ± 33 months (ASF) and 61 ± 38 months (ASR)., Conclusion: ASF and ASR are frequent complications following RTSA implantation with similar poor clinical outcome measures. The healing rate was shown to be much higher with a surgical approach. Nevertheless, fracture consolidation does not result in better clinical outcomes compared with nonunion., (Copyright © 2021 The Author(s). Published by Elsevier Inc. All rights reserved.)

Purpose: Posttraumatic fibular malunion alters ankle joint biomechanics and may lead to pain, stiffness, and premature osteoarthritis. The accurate restoration is key for success of reconstructive surgeries. The aim of this study was to analyze the accuracy of a novel three-dimensional (3D) registration algorithm using different segments of the contralateral anatomy to restore the distal fibula., Methods: Triangular 3D surface models were reconstructed from computed tomographic data of 96 paired lower legs. Four segments were defined: 25% tibia, 50% tibia, 75% fibula, and 75% fibula and tibia. A surface registration algorithm was used to superimpose the mirrored contralateral model on the original model. The accuracy of distal fibula restoration was measured., Results: The median rotation error, 3D distance (Euclidean distance), and 3D angle (Euler's angle) using the distal 25% tibia segment for the registration were 0.8° (- 1.7-4.8), 2.1 mm (1.4-2.9), and 2.9° (1.9-5.4), respectively. The restoration showed the highest errors using the 75% fibula segment (rotation error 3.2° (0.1-8.3); Euclidean distance 4.2 mm (3.1-5.8); Euler's angle 5.8° (3.4-9.2)). The translation error did not differ significantly between segments., Conclusion: 3D registration of the contralateral tibia and fibula reliably approximated the premorbid anatomy of the distal fibula. Registration of the 25% distal tibia, including distinct anatomical landmarks of the fibular notch and malleolar colliculi, restored the anatomy with increasing accuracy, minimizing both rotational and translational errors. This new method of evaluating malreductions could reduce morbidity in patients with ankle fractures., Level of Evidence: IV., (© 2022. The Author(s).)

Background: Although length change patterns of the medial knee structures have been reported, either the weightbearing state was not considered or quantitative radiographic landmarks that allow the identification of the insertion sites were not reported., Purpose: To (1) analyze the length changes of the superficial medial collateral ligament (sMCL) and posterior oblique ligament (POL) under weightbearing conditions and (2) to identify the femoral sMCL insertion site that demonstrates the smallest length changes during knee flexion and report quantitative radiographic landmarks., Study Design: Descriptive laboratory study., Methods: The authors performed a 3-dimensional (3D) analysis of 10 healthy knees from 0° to 120° of knee flexion using weightbearing computed tomography (CT) scans. Ligament length changes of the sMCL and POL during knee flexion were analyzed using an automatic string generation algorithm. The most isometric femoral insertion of the sMCL that demonstrated the smallest length changes throughout the full range of motion (ROM) was identified. Radiographic landmarks were reported on an isometric grid defined by a true lateral view of the 3D CT model and transferred to a digitally reconstructed radiograph., Results: The sMCL demonstrated small ligament length changes, and the POL demonstrated substantial shortening during knee flexion ( P = .005). Shortening of the POL started from 30° of flexion. The most isometric femoral sMCL insertion was located 0.6 ± 1.7 mm posterior and 0.8 ± 1.2 mm inferior to the center of the sMCL insertion and prevented ligament length changes >5% during knee flexion in all participants. The insertion was located 47.8% ± 2.7% from the anterior femoral cortex and 46.3% ± 1.9% from the joint line on a true lateral 3D CT view., Conclusion: The POL demonstrated substantial shortening starting from 30° of knee flexion and requires tightening near full extension to avoid overconstraint. Femoral sMCL graft placement directly posteroinferior to the center of the anatomical insertion of the sMCL demonstrated the most isometric behavior during knee flexion., Clinical Relevance: The described elongation patterns of the sMCL and POL aid in guiding surgical medial knee reconstruction and preventing graft lengthening and overconstraint of the medial compartment. Repetitive graft lengthening is associated with graft failure, and overconstraint leads to increased compartment pressure, cartilage degeneration, and restricted ROM., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: S.F.F. has received consulting fees from Medacta SA (Switzerland), Smith & Nephew (United Kingdom), and Karl Storz SE & Co KG (Germany). AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto., (© The Author(s) 2022.)

The diagnosis of metatarsal stress fractures is challenging. Standard imaging often shows false-negative results. The aim of this study was to create reliable radiologic outcome parameters to predict insufficiency fractures of the metatarsals. We performed an age- and sex-matched case-control study of patients with (n = 18) and without insufficiency fracture (n = 18) of the foot. The metatarsal cortical index (MCI) for each metatarsal was developed to predict an insufficiency fracture. The MCI of each metatarsal was significantly decreased in the insufficiency fracture group compared with the control group (p < .01). The MCI of the fourth ray yielded the highest area under the curve among the analyzed MCI values (area under the curve, 0.79; 95% confidence interval, 0.61-0.90). A cut-off value of 1.62 for the MCI of the fourth ray yielded a sensitivity of 78% and a specificity of 78% to predict insufficiency fracture of the foot (odds ratio, 12.25; 95% confidence interval, 2.54-58.97), and enabled accurate allocation to the insufficiency fracture group versus the control group in 74% of cases. In conclusion, a decreased MCI is associated with metatarsal insufficiency fractures and enables an accurate diagnosis in 3 out of 4 cases. The MCI might aid clinicians in identifying insufficiency fracture, and raise the suspicion of the diagnosis without additional imaging studies., (Copyright © 2021 the American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.)

Background: The isometric characteristics of nonanatomic and anatomic posterolateral corner (PLC) reconstruction techniques under weightbearing conditions remain unclear., Purpose: To (1) simulate graft elongation patterns during knee flexion for 3 different PLC reconstruction techniques (Larson, Arciero, and LaPrade) and (2) compute the most isometric insertion points of the fibular collateral ligament (FCL) graft strands for each technique and report quantitative radiographic landmarks., Study Design: Descriptive laboratory study., Methods: The authors performed a 3-dimensional simulation of 10 healthy knees from 0° to 120° of flexion using weightbearing computed tomography (CT) scans. The simulation was used to calculate ligament length changes during knee flexion for the PLC reconstruction techniques of Larson (nonanatomic single-bundle fibular sling reconstruction), Arciero (anatomic reconstruction with additional popliteofibular ligament graft strand), and LaPrade (anatomic reconstruction with popliteofibular ligament graft strand and popliteus tendon graft strand). The most isometric femoral insertion points for the FCL graft strands were computed within a 10-mm radius around the lateral epicondyle (LE), using an automatic string generation algorithm (0 indicating perfect isometry). Radiographic landmarks for the most isometric points were reported., Results: Median graft lengthening during knee flexion was similar for the anterior graft strands of all 3 techniques. The posterior graft strands demonstrated significant differences, from lengthening for the Arciero (9.9 mm [range, 6.7 to 15.9 mm]) and LaPrade (10.2 mm [range, 4.1 to 19.7 mm]) techniques to shortening for the Larson technique (-17.1 mm [range, -9.3 to -22.3 mm]; P < .0010). The most isometric point for the FCL graft strands of all techniques was located at a median of 2.2 mm (range, -2.2 to 4.5 mm) posterior and 0.3 mm (range, -1.8 to 3.7 mm) distal to the LE., Conclusion: Overconstraint can be avoided by tensioning the posterior graft strands in the Larson technique in extension, and in the Arciero and LaPrade techniques at a minimum of 60° of knee flexion. The most isometric point was located posterodistal to the LE., Clinical Relevance: The described isometric behavior of nonanatomic and anatomic PLC reconstruction techniques can guide optimal surgical reconstruction and prevent graft lengthening and overconstraint of the lateral compartment in knee flexion. Repetitive graft lengthening has been found to be associated with graft failure, and overconstraint favors lateral compartment pressure and cartilage degeneration., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: S.F.F. has received consulting fees from Medacta SA (Switzerland), Smith & Nephew (United Kingdom), and Karl Storz SE & Co. KG (Germany). AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto., (© The Author(s) 2022.)

Background: Assessment of combined anterolateral ligament (ALL) and anterior cruciate ligament (ACL) injury remains challenging but of high importance as the ALL is a contributing stabilizer of tibial internal rotation. The effect of preoperative static tibial internal rotation on ACL -length remains unknown. The aim of the study was analyze the effect of tibial internal rotation on ACL length in single-bundle ACL reconstructions and to quantify tibial internal rotation in combined ACL and ALL injuries., Methods: The effect of tibial internal rotation on ACL length was computed in a three-dimensional (3D) model of 10 healthy knees with 5° increments of tibial internal rotation from 0 to 30° resulting in 70 simulations. For each step ACL length was measured. ALL injury severity was graded by a blinded musculoskeletal radiologist in a retrospective analysis of 61 patients who underwent single-bundle ACL reconstruction. Preoperative tibial internal rotation was measured in magnetic resonance imaging (MRI) and its diagnostic performance was analyzed., Results: ACL length linearly increased 0.7 ± 0.1 mm (2.1 ± 0.5% of initial length) per 5° of tibial internal rotation from 0 to 30° in each patient. Seventeen patients (27.9%) had an intact ALL (grade 0), 10 (16.4%) a grade 1, 21 (34.4%) a grade 2 and 13 (21.3%) a grade 3 injury of the ALL. Patients with a combined ACL and ALL injury grade 3 had a median static tibial internal rotation of 8.8° (interquartile range (IQR): 8.3) compared to 5.6° (IQR: 6.6) in patients with an ALL injury (grade 0-2) (p = 0.03). A cut-off > 13.3° of tibial internal rotation predicted a high-grade ALL injury with a specificity of 92%, a sensitivity of 30%; area under the curve (AUC) 0.70 (95% CI: 0.54-0.85) (p = 0.03) and an accuracy of 79%., Conclusion: ACL length linearly increases with tibial internal rotation from 0 to 30°. A combined ACL and high-grade ALL injury was associated with greater preoperative tibial internal rotation. This potentially contributes to unintentional graft laxity in ACL reconstructed patients, in particular with concomitant high-grade ALL tears., Study Design: Cohort study; Level of evidence, 3., (© 2022. The Author(s).)

Background: The aim of this retrospective study was to examine if a correlation between Morton's Neuroma (MN) and an increased interphalangeal angle (IPA) or intermetatarsal angle (IMA) can be found in preoperative weightbearing dorsal-plantar X-rays of the foot., Methods: Forty-five patients with forty-nine MN in the interspaces 2/3 or 3/4 and 49 controls were recruited for this study. Every MN was matched with an asymptomatic control without history of metatarsalgia. The diagnosis was made by clinical examination, magnetic resonance imaging (MRI) and positive histopathology after operative resection. IMA 1/5, 2/3, 2/4, 2/5, 3/4 and IPA 2/3, 3/4 were measured for both groups., Results: The IPA 3/4 was significantly enlarged by 2.8 degrees (p < 0.001) with Area under the curve (AUC) 0.75 (p < 0.001), sensitivity of 73% and specificity of 67% in feet with MN compared to controls. The IMA 3/4 was significantly enlarged by 1 degree (p < 0.048) with AUC 0.64 (p < 0.031), sensitivity of 71% and specificity of 43% in feet with MN compared to controls. No difference between IMA 2/4, 2/5, 1/5 or correlation between IPA or IMA and the size of the MN in the MRI was found., Conclusion: The results confirm the clinical observation of an increased IPA in patients with MN. An increased IPA should therefore be considered in the diagnosis of MN., (© 2021. The Author(s).)