Search

This paper aimed to solve the impact of operational abrasive wear on the rotor blades of the axial compressor of the turboshaft engine on the decrease in its total compression efficiency ηCt and its transition into unstable work mode (surge). This process is analyzed based on the obtained data by operating TV3-117 helicopter turboshaft engines in high dust atmosphere conditions. Abrasive wear of the rotor blades of axial compressors causes mechanical damage to the blades, reducing their strength, changing their geometry, and aerodynamic properties, reducing the life of the whole compressor and thus the entire engine. Destruction of the compressor of a turboshaft engine may occur suddenly as a result of unstable compressor operation caused by damaged axial compressor blades due to their damage by the abrasive effect of dust.

This paper analyses unstable mode of a free gas turbine of turboshaft helicopter engine TV3-117. The analysis is focused on the conditions of this phenomenon and the possibilities of its solution in a turboshaft helicopter engine and an industrial turbocharger engine with a free gas turbine. Knowing the causes of the unstable mode of operation of a free gas turbine will allow helicopter pilots to prevent accidents and increase the level of flight safety.

This article deals with the description of an approximate numerical estimation approach of a low cycle fatigue of a high pressure turbine disc for the AL-31F turbofan jet engine. The numerical estimation is based on the finite element method carried out in the SolidWorks software. The low cycle fatigue assessment of a high pressure turbine disc was carried out on the basis of dimensional, shape and material disc characteristics, which are available for the particular high pressure engine turbine. The method described here enables relatively fast setting of economically feasible low cycle fatigue of the assessed high pressure turbine disc using a commercially available software. The numerical estimation of accuracy of a low cycle fatigue depends on the accuracy of required input data for the particular investigated object.

This article is focused on solving the problems of determining the true state of gas turbine based on measured changes in thermodynamic parameters. Dependence between the real individual parts for gas turbines and changing the thermodynamic parameters were experimentally verified and confirmed on a small jet engine MPM-20 in the laboratory of the Department of Aviation Engineering at Technical University in Košice. The results of experiments confirm that the wear and tear of basic parts for gas turbines (turbo-compressor engines) to effect the change of thermodynamic parameters of the engine.