Search

Enhancing the operational efficacy of electrical discharge machining (EDM) is crucial for achieving optimal results in various engineering materials. This study introduces an innovative solution—the use of coated electrodes—representing a significant advancement over current limitations. The choice of coating material is critical for micro-EDM performance, necessitating a thorough investigation of its impact. This research explores the application of different coating materials (AlCrN, TiN, and Carbon) on WC electrodes in micro-EDM processes specifically designed for Ti-6Al-4V. A comprehensive assessment was conducted, focusing on key quality indicators such as depth of cut (Z), tool wear rate (TWR), overcut (OVC), and post-machining surface quality. Through rigorous experimental methods, the study demonstrates substantial improvements in these quality parameters with coated electrodes. The results show significant enhancements, including increased Z, reduced TWR and OVC, and improved surface quality. This evidence underscores the effectiveness of coated electrodes in enhancing micro-EDM performance, marking a notable advancement in the precision and quality of Ti–6Al–4V machining processes. Among the evaluated coatings, AlCrN-coated electrodes exhibited the greatest increase in Z, the most significant reduction in TWR, and the best OVC performance compared to other coatings and the uncoated counterpart.

Micro-electrical discharge machining (micro-EDM) stands out as a transformative methodology, offering substantial progress in both technical and economic efficiency through the integration of coated electrodes. This study meticulously analyzes various technological parameters in micro-EDM, focusing specifically on Ti-6Al-4V, a widely employed titanium alloy. The application of a titanium nitride (TiN) coating material on a tungsten carbide (WC) electrode is investigated using the Taguchi method of experimental design. This study employs an ANOVA and factorial design methodology to scrutinize the influence of key parameters, namely voltage (V), capacitance (C), and spindle rotation (in revolutions per minute) (RPM) on the tool wear rate (TWR), overcut (OVC), and Z coordinate (depth) within the micro-EDM process. The findings unveil a noteworthy increase in the TWR with an elevated V, C, and RPM, with capacitance exerting a pronounced influence while voltage exhibits the least impact. OVC exhibits notable variations, revealing an inverse relationship with RPM. The Z coordinate (depth) is significantly affected by capacitance, with voltage and RPM each having a relatively negligible impact. A surface quality analysis exposes similarities and numerous defects in both coated and uncoated electrodes, emphasizing the need for further exploration into the effectiveness of coated electrodes in enhancing post-micro-EDM machined surface layers. This study contributes valuable insights to optimize and advance micro-EDM processes, laying groundwork for future innovations in precision machining.

The exploration of Electrical Discharge Machining (EDM) with coated electrodes represents a relatively novel research avenue, thereby yielding limited published research outcomes. The choice of coating material plays a pivotal role in the EDM machining process, and alterations in coating materials can directly influence the adjustment of technological parameters in EDM. Consequently, research dedicated to optimizing these technological parameters for EDM employing coated electrodes is of paramount importance, and it promises to advance the practical implementation of this cutting-edge technique. In this study, we systematically investigate the technological parameters for EDM employing a copper-coated aluminum electrode in the context of Ti-6Al-4V machining. Our research outcomes are framed within a multi-objective optimization paradigm, with a focus on Material Removal Rate (MRR) and Surface Roughness (SR) as vital quality indicators. To address the intricate multi-objective optimization challenge, we have harnessed the combined power of the Taguchi methodology and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). The amalgamation of these techniques enables us to navigate the complexities of EDM parameter optimization effectively. Our findings reveal that the most favorable process parameters entail a configuration of U=40V, I=40 A, Ton=1000μs, resulting in an MRR of 0.028mg/min and an SR of 7.56μm. These optimized parameters exemplify a substantial enhancement in machining efficiency and surface quality when utilizing coated electrodes. Moreover, our study scrutinizes the quality of the machined surface under optimal conditions with coated electrodes. We employ the TOPSIS method as a proficient solution for this endeavor, offering a straightforward approach to this intricate calculation process. [ABSTRACT FROM AUTHOR]