Search

Coupling and hybridization of different elementary excitations leads to new functionalities. In phononics and spintronics, magnetoelastic coupling between Rayleigh-type surface acoustic wave (SAW) and spin wave (SW) has recently attracted much attention. Quantitatively evaluating and comparing the coupled system are essential to develop the study of the magnetoelastic SAW-SW coupling. So far, previous studies of SAW-SW coupling have employed a quantity called coupling strength. However, it is still challenging to compare the coupling strength values among studies fairly because the quantity depends on the device geometry and the applied magnetic field angle, which are not unified among the previous studies. Here, we focus on a practical constant composed of a magnetoelastic constant and a strain amplitude that depends only on the material properties. We demonstrate a versatile evaluation technique to evaluate the practical constant by combining electrical measurements and optical imaging. An essential part of the technique is an analysis that can be used under off-resonance conditions where SAW and SW resonance frequencies do not match. Existing analysis can only handle the case under on-resonance conditions. Our analysis makes it possible to observe the magnetoelastic couplings between SAW with resonance frequencies that can be imaged optically and SW with resonance frequencies in the gigahertz range. Our demonstrated technique, which uses electrical and optical measurements under off-resonance conditions, can significantly advance research on SAW-SW coupled systems.

Antiferromagnetic magnons possess a distinctive feature absent in their ferromagnetic counterparts: the presence of two distinct handedness modes, the right-handed (RH) and left-handed (LH) precession modes. The magnon handedness determines the sign of spin polarization carried by the propagating magnon, which is indispensable for harnessing the diverse functionalities. However, the control of coherently propagating magnon handedness in antiferromagnets has remained elusive so far. Here we demonstrate the manipulation and electrical readout of propagating magnon handedness in perpendicularly magnetized synthetic antiferromagnets (SAF). We find that the antiferromagnetic magnon handedness can be directly identified by measuring the inverse spin Hall effect (ISHE) voltage, which arises from the spin pumping effect caused by the propagating antiferromagnetic magnons in the SAF structure. The RH and LH modes of the magnon can be distinguishable particularly when the SAF structure is sandwiched by heavy metals with the same sign of spin Hall angle. Moreover, we succeed in controlling the handedness of propagating antiferromagnetic magnons by tuning the excitation microwave frequency. This work unveils promising avenues for harnessing magnon unique properties in antiferromagnet-based magnonic applications.

A Rayleigh-type surface acoustic wave (SAW) is used in various fields as classical and quantum information carriers because of its surface localization, high electrical controllability, and low propagation loss. Coupling and hybridization between the SAW and other physical systems such as magnetization, electron charge, and electron spin are the recent focuses in phononics and spintronics. A precise measurement of the surface wave amplitude is often necessary to discuss the coupling strengths. However, there are only a few such measurement techniques and they generally require a rather complex analysis. Here we develop and demonstrate a straightforward measurement technique that can quantitatively characterize the SAW. The technique optically detects the surface waving due to the coherently driven SAW by the optical path modulation. Furthermore, when the measurement system operates in the shot-noise-limited regime, the surface slope and displacement at the optical spot can be deduced from the optical path modulation signal. Our demonstrated technique will be an important tool for SAW-related research., Comment: 13 pages, 8 figures

Surface acoustic wave (SAW) is utilized in diverse fields ranging from physics, engineering, to biology, for transducing, sensing and processing various signals. Optical measurement of SAW provides valuable information since the amplitude and the phase of the displacement field can be measured locally with the resolution limited by the spot size of the optical beam. So far, optical measurement techniques rely on modulation of optical path, phase, or diffraction associated with SAW. Here, we demonstrate that SAW can be measured with an optical polarimeter. We show that the slope of the periodically tilting surface due to the coherently driven SAW is translated into the angle of polarization rotation, which can be straightforwardly calibrated when polarimeters work in the shot-noise-limited regime. The polarimetric measurement of SAW is thus beneficial for quantitative studies of SAW-based technologies., Comment: 19 pages, 12 figures

Spin and photonic systems are at the heart of modern information devices and emerging quantum technologies. An interplay between electron-hole pairs (excitons) in semiconductors and collective spin excitations (magnons) in magnetic crystals would bridge these heterogeneous systems, leveraging their individual assets in novel interconnected devices. Here, we report the magnon-exciton coupling at the interface between a magnetic thin film and an atomically-thin semiconductor. Our approach allies the long-lived magnons hosted in a film of yttrium iron garnet (YIG) to strongly-bound excitons in a flake of a transition metal dichalcogenide, MoSe$_2$. The magnons induce on the excitons a dynamical valley Zeeman effect ruled by interfacial exchange interactions. This nascent class of hybrid system suggests new opportunities for information transduction between microwave and optical regions., Comment: 23 pages with 14 figures

We demonstrate a real-space imaging of a heterodyne signal of light that is produced as a result of the Brillouin light scattering by coherently driven magnons in magnetostatic modes. With this imaging technique, we characterize surface magnetostatic modes (Damon-Eshbach modes) in a one-dimensional magnonic crystal, which is formed by patterned aluminum strips deposited on the ferromagnetic film. The modified band structures of the magnonic crystal are deduced from the Fourier transforms of the real-space images. The heterodyne imaging provides a simple and powerful method to probe magnons in structured ferromagnetic films, paving a way to investigate more complex phenomena, such as Anderson localization and topological transport with magnons., Comment: 8 pages, 9 figures; fixed typos, results unchanged

We demonstrate the structural imaging of magnetostatic spin-wave modes hosted in a millimeter-sized ferromagnetic sphere. Unlike for low-dimensional magnetic materials, there is no prior technique to image these modes in bulk magnetized solid of revolution. Based on resonant magnetic induction tomography in the microwave range, our approach ensures the robust identification of these non-trivial spin-wave modes by establishing their azimuthal and polar dependences, starting point of magnonic fundamental studies and hybrid systems with complex spin textures well beyond the uniform precession mode., Comment: 6 pages, 4 figures (with Supplemental Material of 13 pages and 8 figures)

Coherent conversion of microwave and optical photons in the single-quantum level can significantly expand our ability to process signals in various fields. Efficient up-conversion of a feeble signal in the microwave domain to the optical domain will lead to quantum-noise-limited microwave amplifiers. Coherent exchange between optical photons and microwave photons will also be a stepping stone to realize long-distance quantum communication. Here we demonstrate bidirectional and coherent conversion between microwave and light using collective spin excitations in a ferromagnet. The converter consists of two harmonic oscillator modes, a microwave cavity mode and a magnetostatic mode called Kittel mode, where microwave photons and magnons in the respective modes are strongly coupled and hybridized. An itinerant microwave field and a travelling optical field can be coupled through the hybrid system, where the microwave field is coupled to the hybrid system through the cavity mode, while the optical field addresses the hybrid system through the Kittel mode via Faraday and inverse Faraday effects. The conversion efficiency is theoretically analyzed and experimentally evaluated. The possible schemes for improving the efficiency are also discussed., Comment: 15 pages, 8 figures