Search

The sensitivity of the Grocott-modified Gomori's methenamine-silver nitrate technique for the detection of fungi is sometimes low, especially for Mucor spp. We modified the Grocott technique by replacing chromic acid with periodic acid in the oxidation step. The use of periodic acid instead of chromic acid enhanced the detectability of Mucor spp. in histopathological sections. Other parameters should be assessed with a high number of cases under different conditions. We propose our protocol as one of the options in practice, especially in cases suspected of Mucor spp. infection.

Some sea slugs sequester chloroplasts from algal food in their intestinal cells and photosynthesize for months. This phenomenon, kleptoplasty, poses a question of how the chloroplast retains its activity without the algal nucleus. There have been debates on the horizontal transfer of algal genes to the animal nucleus. To settle the arguments, this study reported the genome of a kleptoplastic sea slug, Plakobranchus ocellatus, and found no evidence of photosynthetic genes encoded on the nucleus. Nevertheless, it was confirmed that light illumination prolongs the life of mollusk under starvation. These data presented a paradigm that a complex adaptive trait, as typified by photosynthesis, can be transferred between eukaryotic kingdoms by a unique organelle transmission without nuclear gene transfer. Our phylogenomic analysis showed that genes for proteolysis and immunity undergo gene expansion and are up-regulated in chloroplast-enriched tissue, suggesting that these molluskan genes are involved in the phenotype acquisition without horizontal gene transfer.

Acetolactate synthase (ALS) catalyzes the initial step in the biosynthesis of branched-chain amino acids, and is highly conserved from bacteria to higher plants. ALS is encoded by a single copy gene in rice genome and is a target enzyme of several classes of herbicides. Although ALS mutations conferring herbicide-resistance property to plants are well documented, effect of Imazamox (IMZ) on rice and the mutations in ALS correlated with IMZ tolerance were unclear. In this article, the effect of IMZ on rice calli and seedlings in tissue culture conditions were evaluated. Also, the ALS A96V mutation was confirmed to improve IMZ tolerance of rice calli. Based on these results, ALS-assisted multiplex targeted base editing in rice was demonstrated in combination with Target-AID, a CRISPR/Cas9-cytidine deaminase fusion system [1], [2].

Experimental measurements and computer simulation are reported on the void fraction of multi-component randomly packed beds with log-normal, log-uniform, Rosin-Rammler or Andreasen (Gaudin-Schuhmann) size distributions. Packing experiments were done by two methods, i.e. prodding and tapping. Glass beads (spherical particles) and crushed glass (irregularly shaped particles) were used for these experiments. The following results were obtained from the experiments and the simulations. A minimum void fraction of a packed bed with Andreasen distribution exists in the range of Fuller constant q = 0.5-0.8, and the void fractions of packed beds with the other three distributions decrease as the size distribution spreads. The experimental and the simulated results for void fraction were compared with values calculated by our model and agreement between them was fairly good. This model is useful for estimating the void fraction in a multi-component randomly packed bed of spherical and irregularly shaped particles with size distribution.† This report was originally printed in KAGAKU KOGAKU RONBUNSHU, 11(4), 438-443 (1985) in Japanese, before being translated into English by KONA Editorial Committee with the permission of the editorial committee of the Soc. Chemical Engineers, Japan.

1,2,3,4-Tetrakis(carboxyphenyl)benzene (CPB) forms a predictable ladder-shaped porous motif through intermolecular hydrogen-bonding of the carboxy groups. The stacking manner of the ladder motif, on the other hand, cannot be controlled, yielding a crystal structure with discrete inclusion spaces. To modulate the stacking manner, its derivative CPB(OMe) with methoxy substituent groups at 5,6-positions was synthesized and crystallized to yield a crystalline hydrogen-bonded organic framework (HOF), in which the ladder motifs are stacking with a different manner to form 1D inclusion channels, instead of discrete voids. Because of the channel structure, removal of the included solvent molecules can be easily conducted, and the resultant activated HOF CPB(OMe)-a exhibited micropores with BET surface area of 199 m 2  g -1 , which is larger than that of the other HOF CPB-a., (© 2024 Wiley-VCH GmbH.)

We report on the synthesis, characterization and photobehavior of single crystalline non-stoichiometric hydrogen-bonded organic frameworks (NS-HOFs). NS-HOFs (BTNT-1) with various composition ratios were successfully obtained as single crystals from two analogue tetratopic carboxylic acids, possessing naphthalene and benzothiadiazole cores NTTA and BTTA, respectively. The heterogeneous distribution of the components was thoroughly confirmed by time-resolved fluorescence microscopy and focused synchrotron X-ray radiation techniques, for the first time. The versatile fluorescence of BTNT-1 behavior depends on the composition ratio and distribution of the component in the single crystals. We observed not only fluorescence bands with various colors such as purple, blue, green and white, depending on the composition ratio of both components in BTNT-1, but also different emission bands from a single crystal. Furthermore, we provide details on their emission lifetimes following the composition, emission color and targeted region on the crystal. These results demonstrate unique and versatile optical properties of carboxylic acid-based NS-HOFs and provide a concept of creating functional mixed porous materials capable of different and tunable optical properties., (© 2024 Wiley‐VCH GmbH.)

A series of isostructural reticular frameworks with systematic differences on chemical structures allows us to disclose correlations between specific structural factors and properties, providing insights for designing novel porous materials. However, even slight differences in the molecular structure often lead to non-isostructural polymorphic frameworks particularly in the case of hydrogen-bonded organic frameworks (HOFs) because the structures of HOFs are based on a subtle balance of reversible interactions. In this study, we found that three simple analogues of tetracarboxylic acids with naphthalene, quinoxaline, and pyrazinopyrazine cores (NT, QX, and PP, respectively) yielded isostructural solvated HOFs (NT-1, QX-1, and PP-1, respectively), where hydrogen-bonded sql-networked sheets were slip-stacked with closely similar manners. More importantly, these isostructural HOFs underwent structural transformations in different manners upon removal of the guest solvents. Comparison of the crystal structures of the HOFs before and after the transformation revealed that intermolecular interactions of the core significantly affected on rearrangements of hydrogen bonds in the transformation. The results suggest the potential to control the properties and functions of isostructural HOFs by elements in the core., (© 2024 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The molecular conformation, crystalline morphology, and properties of photochromic organic crystals can be controlled through photoirradiation, making them promising candidates for functional organic materials. However, photochromic porous molecular crystals with a networked framework structure are rare due to the difficulty in maintaining space that allows for photo-induced molecular motion in the crystalline state. This study describes a photo-responsive single crystal based on hydrogen-bonded (H-bonded) network of dihydrodimethylbenzo[e]pyrene derivative 4BDHP. A crystal composed of H-bonded undulate layers, 4BDHP-2, underwent photo-isomerization in the crystalline state due to loose stacking of the layers. Particularly, enantio-pure crystal (S,S)-4BDHP-2 allowed to reveal the structure of the photoisomerized crystal, in which the closed form (4BDHP) and open form (4CPD) were arranged alternately with keeping crystalline periodicity, although side reactions were also implied. The present proof-of-concept system of a photochromic framework that retains crystalline periodicity after photo-isomerization may provide new light-driven porous functional materials., (© 2024 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

To develop porous organic frameworks, precise control of the stacking manner of two-dimensional porous motifs and structural characterization of the resultant framework are important. From these points of view, porous molecular crystals formed through reversible intermolecular hydrogen bonds, such as hydrogen-bonded organic frameworks (HOFs), can provide deep insight because of their high crystallinity, affording single-crystalline X-ray diffraction analysis. In this study, we demonstrate that the stacking manner of hydrogen-bonded hexagonal network (HexNet) sheets can be controlled by synchronizing a homological triangular macrocyclic tecton and a hydrogen-bonded cyclic supramolecular synthon called the phenylene triangle. A structure of the resultant HOF was crystallographically characterized and revealed to have a large channel aperture of 2.4 nm. The HOF also shows thermal stability up to 290 °C, which is higher than that of the conventional HexNet frameworks., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Co-published by University of Science and Technology of China and American Chemical Society.)

The effect of the core size on the structure and chirality of self-assembled molecular networks was investigated using two aromatic carboxylic acid derivatives with frameworks displaying C symmetry, triphenylene derivative H3TTCA and dehydrobenzo[12]annulene (DBA) derivative DBACOOH, each having three carboxy groups per molecule. Scanning tunneling microscopy observations at the 1-heptanoic acid/graphite interface revealed H3TTCA exclusively forming a chiral honeycomb structure, and DBACOOH forming three structures (type I, II, and III structures) depending on its concentration and whether the system is subjected to annealing treatment. Hydrogen bonding interaction patterns and chirality were carefully analyzed based on a modeling study using molecular mechanics simulations. Moreover, DBACOOH forms chiral honeycomb structures through the co-adsorption of guest molecules. Structural diversity observed for DBACOOH is attributed to its relatively large core size, with this feature modulating the balance between molecule-molecule and molecule-substrate interactions.3h symmetry, triphenylene derivative H3TTCA and dehydrobenzo[12]annulene (DBA) derivative DBACOOH, each having three carboxy groups per molecule. Scanning tunneling microscopy observations at the 1-heptanoic acid/graphite interface revealed H3TTCA exclusively forming a chiral honeycomb structure, and DBACOOH forming three structures (type I, II, and III structures) depending on its concentration and whether the system is subjected to annealing treatment. Hydrogen bonding interaction patterns and chirality were carefully analyzed based on a modeling study using molecular mechanics simulations. Moreover, DBACOOH forms chiral honeycomb structures through the co-adsorption of guest molecules. Structural diversity observed for DBACOOH is attributed to its relatively large core size, with this feature modulating the balance between molecule-molecule and molecule-substrate interactions., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Experimental and theoretical rationalization of bond-shift valence tautomerization, characterized by double-well potential surfaces, is one of the most challenging topics of study among the rich electronic properties of antiaromatic molecules. Although the pseudo-Jahn-Teller effect (PJTE) is an essential effect to provide attractive characteristics of 4 n π systems, an understanding of the structure-property relationship derived from the PJTE for planar 4 n π electron systems is still in its infancy. Herein, we describe the synthesis and characterization of two regioisomers of the thiophene-fused diareno[ a , f ]pentalenes 6 and 7 . The magnetic and optoelectronic properties characterize these sulfur-doped diareno[ a , f ]pentalenes as open-shell antiaromatic molecules, in sharp contrast to the closed-shell antiaromatic systems of 3 and 5 , in which these main cores consist of the same number of π electrons as 6 and 7 . Notably, thiophene-fused 6b and 7b showed pronounced antiaromaticity, the strongest among the previous systems, as well as moderate open-shell characteristics. Our experimental and theoretical investigations concluded that these properties of 6b and 7b are derived from the small energy barrier E a ‡ for the bond-shift valence tautomerization. The energy profile of the single crystal of 6b showed the temperature-dependent structural variations assigned to the dynamic mutual exchange between the two C s -symmetric structures, which was also supported by changes in the chemical shifts of variable-temperature 1 H NMR spectra in the solution phase. Both experimental and computational results revealed the importance of introducing heteroaromatic rings into 4 n π systems for controlling the PJTE and manifesting the antiaromatic and open-shell natures originating from the high-symmetric structure. The findings of this study advance the understanding of antiaromaticity characterized by the PJTE by controlling the energy barrier for bond-shift valence tautomerizations, potentially leading to the rational design of optoelectronic devices based on novel antiaromatic molecules possessing the strong contributions of their high-symmetric geometries.

Tetraphenylethylene (TPE) derivatives are ones of the most versatile building blocks showing aggregation-induced emission (AIE). However, their applications are limited by the photophysical and photochemical processes that occur in their excited state. Herein, we report a detailed study of the photochemical behaviour of a new TPE derivative with bulky terphenyl groups (TTECOOBu) in solvents of different viscosities and in a PMMA film. UV light irradiation shows an efficient photocyclization reaction, which produces a 9,10-diphenylphenanthrene (DPP) derivative photoproduct. The emission spectra of the irradiated samples show intermediate (∼420 nm) and final (∼380 nm) species. The photocyclization events are more efficient in environments of higher viscosities or rigidity. We show that in a photoirradiated PMMA film containing TTECOOBu, it is possible to etch a message for more than 1 year. The kinetics is dictated by the motions of the phenyl rings and is faster when their motions are precluded or inhibited. We also elucidated the femto- to millisecond photodynamics of the intermediate and final photoproducts and provide a full picture of their relaxation, with the latter in ∼1 ns at S 1 and ∼1 μs at T 1 . We also demonstrate that the kinetics of the bulky TTECOOBu is much slower than that of the TPE core. Our results also show that both photoevents are not reversible contrary to the case of TPE kinetics. We believe that these results will shed more light on the photochemical behaviour of TPE derivatives and should help in the development of novel TPE-based materials with improved photostability and photo-properties.

Aperture shape and size of flexible hydrogen-bonded organic frameworks (HOF) were statically modulated using various aromatic solvents, and dynamically changed by desorption and adsorption of the solvent molecules.

Chiral resolution of rac-4-cyano-1-aminoindane, a key intermediate of ozanimod, was successfully achieved through a combination of crystallization and enantioselective dissolution with up to 96% ee. The disastereomeric salt with di- p -toluoyl-L-tartaric acid was characterized by the construction of a binary phase diagram and ternary isotherm. Enantioselective dissolution was then employed to further enrich the enantiomer.

Though s -indacene is an intriguing antiaromatic hydrocarbon of 12 π-electrons, it has been underrepresented due to the lack of efficient and versatile methods to prepare stable derivatives. Herein we report a concise and modular synthetic method for hexaaryl- s -indacene derivatives bearing electron-donating/-accepting groups at specific positions to furnish C 2 h -, D 2 h -, and C 2 v -symmetric substitution patterns. We also report the effects of substituents on their molecular structures, frontier molecular orbital (MO) levels, and magnetically induced ring current tropicities. Both theoretical calculations and X-ray structure analyses indicate that the derivatives of the C 2 h -substitution pattern adopt different C 2 h structures with significant bond length alternation depending on the electronic property of the substituents. Due to the nonuniform distribution of the frontier MOs, their energy levels are selectively modulated by the electron-donating substituents. This leads to the inversion of the HOMO and HOMO-1 sequences with respect to those of the intrinsic s -indacene as theoretically predicted and experimentally proven by the absorption spectra at visible and near-infrared regions. The NICS values and the 1 H NMR chemical shifts of the s -indacene derivatives indicate their weak antiaromaticity. The different tropicities are explained by the modulation of the HOMO and HOMO-1 levels. In addition, for the hexaxylyl derivative, weak fluorescence from the S 2 excited state was detected due to the large energy gap between the S 1 and S 2 states. Notably, an organic field-effect transistor (OFET) fabricated using the hexaxylyl derivative exhibited moderate hole carrier mobility, a result which opens the door for optoelectronic applications of s -indacene derivatives.

Tetraphenylethylene (TPE) derivatives are one of the fundamental units for developing aggregation induced emission (AIE) scaffolds. However, the underlying mechanisms implicated in the relaxation of the excited TPE remain a topic of ongoing discussion, while the effect of bulky substituents on its photobehaviour is still under scrutiny. Here, we report a detailed study of the photophysical properties of a new symmetrical and bulky TPE derivative with terphenyl groups (TTECOOBu) in solvents of different polarities and viscosities. Using femto- to nanosecond (fs-ns) time-resolved absorption and emission techniques, we elucidated the role of the phenyl group rotations and core ethylene bond twisting in its behaviour. We demonstrate that TTECOOBu in DCM solutions undergoes a 600 fs charge separation along the ethylene bond leading to a resonance structure with a lifetime of ∼1 ns. The latter relaxes via two consecutive events: a twisting of the ethylene bond (∼ 9 ps) and a rotation of the phenyl rings (∼ 30 ps) leading to conformationally-relaxed species with a largely Stokes-shifted emission (∼ 12 500 cm -1 ). The formation of the red-emitting species clearly depends on the solvent viscosity and rigidity of the medium. Contrary to the photobehavior in the highly viscous triacetin or rigid polymer matrix of PMMA, a reversible mechanism was observed in DCM and DMF solutions. These results provide new findings on the ultrafast mechanisms of excited TPE derivatives and should help in the development of new molecular rotors with interesting AIE properties for photonic applications.

Porous frameworks composed of non-stoichiometrically mixed multicomponent molecules attract much attention from a functional viewpoint. However, their designed preparation and precise structural characterization remain challenging. Herein, we demonstrate that cocrystallization of tetrakis(4-carboxyphenyl)hexahydropyrene and pyrene derivatives (CP-Hp and CP-Py, respectively) yields non-stoichiometric mixed frameworks through networking via hydrogen bonding. The composition ratio of CP-Hp and CP-Py in the framework was determined by single crystalline X-ray crystallographic analysis, indicating that the mixed frameworks were formed over a wide range of composition ratios. Furthermore, microscopic Raman spectroscopy on the single crystal indicates that the components are not uniformly distributed such as ideal solid solution, but are done gradationally or inhomogeneously., (© 2022 Wiley-VCH GmbH.)

A rigid hydrogen-bonded organic framework (HOF) was constructed from a C 3 -symmetric hexatopic carboxylic acid with a hydrophilic 18-crown-6-ether (18C6) component. Despite the flexible macrocyclic structure with many conformations, the derivative with three 4,4'-dicarboxy-o-terphenyl moieties in the periphery yielded a rigid layered porous framework through directional intermolecular hydrogen bonding. Interestingly, the HOF possesses 1D channels with bottleneck composed of 18C6 rings. The HOF shows proton conductivity (1.12×10 -7  S cm -1 ) through Grotthuss mechanism (E a =0.27 eV) under 98 %RH. The present unique water channel structure provides an inspiration to create molecular porous materials., (© 2022 Wiley-VCH GmbH.)

Porous organic frameworks possessing interactive free sites in the pore have attracted much attention due to their potential to show the site-originated specific functionalities. Herein, we demonstrate that such a framework could be constructed using a concept of geometrically mismatched frameworks composed of phenanthroline-based tetratopic carboxylic acid CP-Phen. Simple recrystallization of CP-Phen yielded a solvent included porous framework CP-Phen-1, in which three of four carboxy groups form hydrogen-bonded dimer to form a ladder-shaped framework, while the remained one does not participate in framework formation due to geometrical mismatch and interacts with solvent molecules through weak hydrogen-bonding. This result implies that our proposed strategy is effective to provide free interactive sites in porous frameworks. Although CP-Phen-1 undergoes two-step structural transformation presumably accompanied by hydrogen-bond rearrangements upon loss of solvent molecules, the activate framework shows good thermal stability up to 360 °C and selective CO 2 adsorption., (© 2022 Wiley-VCH GmbH.)

Hydrogen-bonded organic frameworks (HOFs) have attracted renewed attention as another type of promising candidates for functional porous materials. In most cases of HOF preparation, the applied molecular design principle is based on molecules with rigid π-conjugated skeleton together with more than three H-bonding groups to achieve 2D- or 3D-networked structures. However, the design principle does not always work, but results in formation of unexpected structures, where subtle structural factors of which we are not aware dictate the entire structure of HOFs. In this contribution, we assess recent advances in HOFs, focusing on those composed of hexatopic building block molecules, which can provide robust frameworks with a wide range of topologies and properties. The HOFs described in this work are classified into three types, depending on their H-bonded structural motifs. Here in, we focus on: (1) the chemical aspects that govern their unique fundamental chemistry and structures; and (2) their photophysics at the ensemble and single-crystal levels. The work addresses and discusses how these aspects affect and orient their photonic applicability. We trust that this contribution will provide a deep awareness and will help scientists to build up a systematic series of porous materials with the aim to control both their structural and photodynamical assets.

The dianion and dication of tetramesityl-substituted tetracyclopentatetraphenylene, a circulene consisting of alternating five- and six-membered rings, have been generated by reduction with alkali metals and oxidation with antimony(V) halides, respectively. They are theoretically predicted to adopt double annulenoid structures called annulene-within-an-annulene models in which the outer and inner conjugation circuits are significantly decoupled. The theoretical structures were experimentally proven by X-ray crystallographic analyses and the electronic configurations were supported by MCD spectra. Based on the 13 C NMR chemical shifts, negative and positive charges are shown to be located mainly at the outer periphery, indicating that the dianion and dication have delocalized 22-π and 18-π electron outer perimeters, respectively, and 8-π electron structure at the inner ring. Notably, the dianion has an open-shell character, whereas the dication has a closed-shell ground state., (© 2021 Wiley-VCH GmbH.)

Quasi single-crystal-to-single-crystal transformation of a hydrogen-bonded organic framework (HOF) was accurately revealed and the mechanism was proposed. Interestingly, Br/π interaction allows a snapshot of the intermediate phase of the crystal structure to be solved.

The library of isostructural porous frameworks enables a systematic survey to optimize the structure and functionality of porous materials. In contrary to metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), a handful of isostructural frameworks have been reported for hydrogen-bonded organic frameworks (HOFs) due to the weakness of the bonds. Herein, we provide a rule-of-thumb to develop isostructural HOFs, where we demonstrate the construction of the third and fourth generation of isostructural HAT-based HOFs ( TolHAT-1 and ThiaHAT-1 ) by considering three important structural factors, that are (1) directional H-bonding, (2) shape-fitted docking of the HAT core, and (3) modulation of peripheral moieties. Their structural and photo-physical properties including HCl vapor detection are presented. Moreover, TolHAT-1 , ThiaHAT-1 , and other isostructural HOFs ( CPHAT-1 and CBPHAT-1 ) were thoroughly compared from the viewpoints of structures and properties. Importantly, molecular dynamics (MD) simulation proves to be rationally capable of evaluating the stability of isostructural HOFs. These results can accelerate the development of various isostructural molecular porous materials., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

We prepared octylbenzoate-substituted [12]DBA (C8[12]DBA) as an organic molecular glass material. Even with a central large, planar π unit of [12]DBA, which is generally advantageous for the formation of a crystalline/liquid crystalline state, this compound formed a thermally stable glass state due to its small intermolecular π contact between [12]DBA units and twisted geometries around the terminal benzoate units. C8[12]DBA showed a unique dielectric anomaly and isolated fluorescence properties in the glass state.

Hydrogen-bonded organic frameworks (HOFs) are the focus of intense scientific research due their potential applications in science and technology. Here, we report on the synthesis, characterization, and photobehavior of a new HOF (T12F-1(124TCB)) based on a dehydrobenzoannulene derivative containing fluorine atoms (T12F-COOH). This HOF exhibits a 2D porous sheet, which is hexagonally networked via H-bonds between the carboxylic groups, and has an interlayers distance (4.3 Å) that is longer than that of a typical π-π interaction. The presence of the fluorine atoms in the DBA molecular units largely increases the emission quantum yield in DMF (0.33, T12F-COOH) when compared to the parent compound (0.02, T12-COOH). The time-resolved dynamics of T12F-COOH in DMF is governed by the emission from a locally excited state (S1, ~ 0.4 ns), a charge-transfer state (S1(CT), ~ 2 ns), and a room temperature emissive triplet state (T1, ~ 20 ns), in addition to a non-emissive triplet structure with a charge-transfer character (T1(CT), τ = 0.75 µs). We also report on the results using T12F-ester. Interestingly, FLIM experiments on single crystals unravel that the emission lifetimes of the crystalline HOF are almost twice those of the amorphous ones or the solid T12F-ester sample. This shows the relevance of the H-bonds in the photodynamics of the HOF and provides a strong basis for further development and study of HOFs based on DBAs for potential applications in photonics.

3,5-Ethenoporphyrin is a π-extended porphyrin containing a fused ethene unit between the meso - and β-positions, exhibiting unique contribution of macrocyclic antiaromaticity. We have recently reported that its analogue, etheno-fused diporphyrin, underwent thermal [2 + 2] cycloaddition to furnish X-shaped cyclobutane-linked tetraporphyrins. Here we demonstrate that the cyclobutane-ring formation is dynamically redox-active. Namely, the tetraporphyrin underwent two-step four-electron oxidation to afford two etheno-fused diporphyrin dications. The reduction of the resulting dication regenerated the cyclobutane-linked tetraporphyrin. The dication was sufficiently stable to allow its isolation under ambient conditions. The structure of the dication has been confirmed by 1 H NMR spectroscopy and X-ray diffraction analysis. Importantly, the simultaneous double C-C bond cleavage in the cyclopropane ring in the tetraporphyrin is exceptional among dynamic redox (dyrex) systems to achieve large structural changes, thus offering new insights for the design of novel redox-active functional organic materials for electrochromic dyes, organic batteries, and organic memories., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Diacetylene derivatives exhibit solid-state polymerization to polydiacetylene initiated by UV light or γ-ray irradiation. The activation of the photopolymerization relies on the monomer diynes arrangement. Recently, it has been demonstrated that the first mechanoresponsive bisamide substituted diacetylenes (DAs) show dramatic switching from light-inert to light-reactive states at a given pressure. The origin of this unique phenomenon was apparently related to the pressure-sensitive crystalline transition in DAs, but the molecular mechanism remains elusive. To obtain more insight, herein a series of DAs with varying terminal alkyl spacer length is presented, and their molecular structural effect on the intermolecular hydrogen bonding and steric repulsion is examined. In pristine states, even-parity DAs were inactive upon UV irradiation (λ=254 nm) unless external pressure was applied. By contrast, odd-parity DAs were easily polymerized upon UV irradiation without pressure application. However, the pressure-induced crystalline phase transition exhibiting photopolymerization was valid for all DAs regardless of their alkyl spacer length. A systematic investigation revealed that the terminal alkyl spacer length, especially its odd/even parity plays a key role in determining the intrinsic intermolecular hydrogen-bonding nature of DA crystals and the resultant molecular packing. In addition, the relevant thermochromic behavior was also observed from photopolymerized polydiacetylenes., (© 2020 Wiley-VCH GmbH.)

Redox-active hexakis(4-carboxyphenyl) tri(dithiolylidene)cyclohexanetrione (CPDC) was synthesized. The CPDC-based porous framework, constructed via anomalistic helical hydrogen-bonding, exhibites permanent porosity and photoconductivity.

Interpenetration of low-dimensional networked structural motifs crucially affects porosity, stability, and properties of the whole reticular framework. However, varying and controlling the manner of interpenetration is still challenging. Herein, a porous hydrogen-bonded organic framework (HOF) with wvm-like weave constructed by triaxially woven chicken wires of X-shaped tetra-armed tetrakis(carboxybiphenyl)ethene CBPE, formally 4',4''',4''''',4'''''''-(ethene-1,1,2,2-tetrayl)tetrakis(1,1'-biphenyl-4-carboxylic acid), is reported. The structure is a contrast to a non-interpenetrated layered framework composed of tetrakis(4-carboxyphenyl)ethene CPE. This exotic framework of CBPE is due to the disproportionate conformation of the outer four phenylene rings in the peripheral biphenyl arms. The activated framework CBPE-1a exhibits thermal stability up to 220 °C and a BET surface area of 555 m 2  g -1 . Additionally, the HOF shows mechanochromic behavior in terms of fluorescence color and quantum efficiency. The achievement of the present HOFs can provide insight into constructing a new type of functional porous organic materials with interwoven network structures., (© 2020 Wiley-VCH GmbH.)

Crystals of (HDABCO+)9(DABCO)[Ni(dmit)2]9·6CH3CN were shown to have a space group of R3[combining macron], a hexapetal flower-like channel of [Ni(dmit)2] anions, and a one-dimensional hydrogen bonding chain composed of protonated DABCO and CH3CN molecules. The crystals display antiferromagnetic and ferromagnetic interactions within and between hexamers, respectively, whereas the flexible DABCO-CH3CN array shows dielectric relaxation.

A dibenzo[g,p]chrysene (DBC)-based hydrogen-bonded organic framework (HOF) was constructed by shape-fitted docking of the twisted π-conjugated core. The activated HOF, possessing exactly eclipsed stacking of the DBC cores, (CPDBC-1a) had a BET surface area of 1548 m2 g-1 and possessed photoconductivity.